Makefile.kmk@ 26034

Last change on this file since 26034 was 25706, checked in by vboxsync, 15 years ago
Makefile: use time stamp file for EFI firmware unpacking, since the unzip tool preserves the time stamp and thus the unpacked files are always older than the zip file.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 42.7 KB

Line
1	# $Id: Makefile.kmk 25706 2010-01-11 09:57:39Z vboxsync $
2	## @file
3	# Top level makefile.
4	#
5
6	#
7	# Copyright (C) 2006-2007 Sun Microsystems, Inc.
8	#
9	# This file is part of VirtualBox Open Source Edition (OSE), as
10	# available from http://www.virtualbox.org. This file is free software;
11	# you can redistribute it and/or modify it under the terms of the GNU
12	# General Public License (GPL) as published by the Free Software
13	# Foundation, in version 2 as it comes in the "COPYING" file of the
14	# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	#
17	# Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
18	# Clara, CA 95054 USA or visit http://www.sun.com if you need
19	# additional information or have any questions.
20	#
21
22	SUB_DEPTH = .
23	include $(KBUILD_PATH)/subheader.kmk
24
25	#
26	# Sub-makefiles / Sub-directories.
27	#
28	ifdef VBOX_SINGLE_MAKEFILE
29	if defined(VBOX_WITH_DOCS) && !defined(VBOX_ONLY_ADDITIONS)
30	include $(PATH_SUB_CURRENT)/doc/manual/Makefile.kmk
31	endif
32	include $(PATH_SUB_CURRENT)/src/Makefile.kmk
33	else
34	if defined(VBOX_WITH_DOCS) && !defined(VBOX_ONLY_ADDITIONS)
35	SUBDIRS = doc/manual
36	endif
37	SUBDIRS += src
38	endif
39
40
41	#
42	# Clean up global stuff that Config.kmk generates.
43	#
44	OTHER_CLEAN += \
45	$(VBOX_PACKAGE_HEADER) \
46	$(VBOX_LICENSE_VER_KMK) \
47	$(VBOX_VERSION_MK) \
48	$(VBOX_VERSION_HEADER) \
49	$(VBOX_VERSION_STAMP) \
50	$(wildcard $(PATH_OUT)/version-stamp-..*) \
51	$(VBOX_SVN_REV_KMK).ts \
52	$(VBOX_SVN_REV_KMK) \
53	$(PATH_OUT)/GCCConfig.kmk
54
55
56	ifndef VBOX_ONLY_DOCS
57	ifndef VBOX_ONLY_ADDITIONS
58
59	ifndef VBOX_OSE
60	#
61	# Install the license (and misc non-executable stuff).
62	#
63	INSTALLS += nobin
64	nobin_INST = $(INST_BIN)
65	nobin_MODE = 0644
66	nobin_SOURCES =
67	ifdef VBOX_LICENSE_FILES
68	nobin_SOURCES += \
69	$(VBOX_BRAND_LICENSE_HTML)=>License-$(VBOX_LICENSE_VER).html \
70	$(foreach f,$(VBOX_INSTALLER_ADD_LANGUAGES),$(VBOX_BRAND_$(f)_LICENSE_HTML)=>License-$(VBOX_LICENSE_VER)-$(f).html)
71	endif
72	endif # !OSE
73
74
75	#
76	# Install external binaries (mostly redistributable parts of tools we use).
77	# This must be done before we build the manual.
78	#
79	# To avoid dragging in unnecessary tools and sdks here, we don't use the .win
80	# and .linux property suffixes.
81	#
82	INSTALLS += bin
83
84	bin_INST = $(INST_BIN)
85
86	# The SDL DLLs
87	if1of ($(KBUILD_TARGET), win os2)
88	ifneq ($(VBOX_WITH_VBOXSDL)$(VBOX_WITH_VBOXBFE),)
89	include $(KBUILD_PATH)/sdks/LIBSDL.kmk
90	bin_SOURCES += \
91	$(DLL_SDK_LIBSDL_SDL)
92	ifdef VBOX_WITH_SECURELABEL
93	bin_SOURCES += \
94	$(DLL_SDK_LIBSDL_SDLTTF)
95	endif
96	ifeq ($(KBUILD_TARGET),os2)
97	bin_SOURCES += \
98	$(DLL_SDK_LIBSDL_FSLIB)
99	endif
100	endif
101	endif
102
103
104	# The compiler runtime DLLs.
105	ifeq ($(KBUILD_TARGET).$(VBOX_WITHOUT_COMPILER_REDIST),win.)
106	ifdef VBOX_USE_VCC80
107	include $(KBUILD_PATH)/tools/VCC80X86.kmk
108	include $(KBUILD_PATH)/tools/VCC80AMD64.kmk
109	bin_SOURCES.x86 += \
110	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
111	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcr80.dll=>Microsoft.VC80.CRT/msvcr80.dll \
112	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcp80.dll=>Microsoft.VC80.CRT/msvcp80.dll \
113	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>testcase/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
114	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcr80.dll=>testcase/Microsoft.VC80.CRT/msvcr80.dll \
115	$(PATH_TOOL_VCC80X86)/redist/x86/Microsoft.VC80.CRT/msvcp80.dll=>testcase/Microsoft.VC80.CRT/msvcp80.dll
116	bin_SOURCES.amd64 += \
117	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
118	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcr80.dll=>Microsoft.VC80.CRT/msvcr80.dll \
119	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcp80.dll=>Microsoft.VC80.CRT/msvcp80.dll \
120	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest=>testcase/Microsoft.VC80.CRT/Microsoft.VC80.CRT.manifest \
121	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcr80.dll=>testcase/Microsoft.VC80.CRT/msvcr80.dll \
122	$(PATH_TOOL_VCC80AMD64)/redist/amd64/Microsoft.VC80.CRT/msvcp80.dll=>testcase/Microsoft.VC80.CRT/msvcp80.dll
123	ifeq ($(VBOX_VCC_CRT_TYPE),d)
124	bin_SOURCES.x86 += \
125	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
126	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcr80d.dll=>Microsoft.VC80.DebugCRT/msvcr80d.dll \
127	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcp80d.dll=>Microsoft.VC80.DebugCRT/msvcp80d.dll \
128	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>testcase/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
129	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcr80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcr80d.dll \
130	$(PATH_TOOL_VCC80X86)/redist/Debug_NonRedist/x86/Microsoft.VC80.DebugCRT/msvcp80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcp80d.dll
131	bin_SOURCES.amd64 += \
132	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
133	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcr80d.dll=>Microsoft.VC80.DebugCRT/msvcr80d.dll \
134	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcp80d.dll=>Microsoft.VC80.DebugCRT/msvcp80d.dll \
135	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest=>testcase/Microsoft.VC80.DebugCRT/Microsoft.VC80.DebugCRT.manifest \
136	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcr80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcr80d.dll \
137	$(PATH_TOOL_VCC80AMD64)/redist/Debug_NonRedist/amd64/Microsoft.VC80.DebugCRT/msvcp80d.dll=>testcase/Microsoft.VC80.DebugCRT/msvcp80d.dll
138	endif
139	endif
140	ifndef VBOX_USE_VCC80
141	VBOX_INSTALL_VCC70_RT = 1
142	endif
143	ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),win.x86)
144	VBOX_INSTALL_VCC70_RT = 1
145	endif
146	ifdef VBOX_INSTALL_VCC70_RT
147	include $(KBUILD_PATH)/tools/VCC70.kmk
148
149	## @todo Move these defines to VCC70.
150	DLL_TOOL_VCC70_MSVCR71 ?= $(PATH_TOOL_VCC70)/bin/msvcr71.dll
151	ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCR71)),)
152	bin_SOURCES += \
153	$(DLL_TOOL_VCC70_MSVCR71)=>msvcr71.dll \
154	$(DLL_TOOL_VCC70_MSVCR71)=>testcase/msvcr71.dll
155	endif
156	ifeq ($(VBOX_VCC_CRT_TYPE),d)
157	DLL_TOOL_VCC70_MSVCR71D ?= $(PATH_TOOL_VCC70)/bin/msvcr71d.dll
158	ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCR71D)),)
159	bin_SOURCES += \
160	$(DLL_TOOL_VCC70_MSVCR71D)=>msvcr71d.dll \
161	$(DLL_TOOL_VCC70_MSVCR71D)=>testcase/msvcr71d.dll
162	endif
163	endif
164
165	DLL_TOOL_VCC70_MSVCP71 ?= $(PATH_TOOL_VCC70)/bin/msvcp71.dll
166	ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCP71)),)
167	bin_SOURCES += \
168	$(DLL_TOOL_VCC70_MSVCP71)=>msvcp71.dll \
169	$(DLL_TOOL_VCC70_MSVCP71)=>testcase/msvcp71.dll
170	endif
171	ifeq ($(VBOX_VCC_CRT_TYPE),d)
172	DLL_TOOL_VCC70_MSVCP71D ?= $(PATH_TOOL_VCC70)/bin/msvcp71d.dll
173	ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCP71D)),)
174	bin_SOURCES += \
175	$(DLL_TOOL_VCC70_MSVCP71D)=>msvcp71d.dll \
176	$(DLL_TOOL_VCC70_MSVCP71D)=>testcase/msvcp71d.dll
177	endif
178	endif
179
180	DLL_TOOL_VCC70_MSVCRT ?= $(PATH_TOOL_VCC70)/bin/msvcrt.dll
181	ifneq ($(wildcard $(DLL_TOOL_VCC70_MSVCRT)),)
182	bin_SOURCES += \
183	$(DLL_TOOL_VCC70_MSVCRT)=>msvcrt.dll \
184	$(DLL_TOOL_VCC70_MSVCRT)=>testcase/msvcrt.dll
185	endif
186	endif
187	endif
188
189
190	ifdef VBOX_WITH_QT4_SUN
191	#
192	# Install our Qt DLLs / Shared Objects / Frameworks.
193	# Note: The installer fixes the darwin .dylibs when hardening is enabled.
194	#
195	INSTALLS += qt4-bin
196	qt4-bin_MODE = 755
197	ifeq ($(KBUILD_TARGET),darwin)
198	qt4-bin_INST = $(INST_VIRTUALBOX)Contents/
199	qt4-bin_SOURCES = $(foreach qtmod, QtCore QtGui QtNetwork $(if $(VBOX_GUI_USE_QGL), QtOpenGL,) \
200	,$(VBOX_PATH_QT4)/Frameworks/$(qtmod)VBox.framework/Versions/4/$(qtmod)VBox=>Frameworks/$(qtmod)VBox.framework/Versions/4/$(qtmod)VBox)
201	ifdef VBOX_WITH_COCOA_QT
202	qt4-bin_SOURCES += \
203	$(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/classes.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/classes.nib \
204	$(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/info.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/info.nib \
205	$(VBOX_PATH_QT4)/Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/keyedobjects.nib=>Frameworks/QtGuiVBox.framework/Versions/4/Resources/qt_menu.nib/keyedobjects.nib
206	endif
207	qt4-bin_SOURCES += \
208	$(VBOX_PATH_QT4)/plugins/accessible/libqtaccessiblewidgets.dylib=>MacOS/accessible/libqtaccessiblewidgets.dylib
209	qt4-bin_SYMLINKS = $(foreach qtmod, QtCore QtGui QtNetwork $(if $(VBOX_GUI_USE_QGL), QtOpenGL,) \
210	,Frameworks/$(qtmod)VBox.framework/$(qtmod)VBox=>Versions/4/$(qtmod)VBox)
211	ifdef VBOX_WITH_COCOA_QT
212	qt4-bin_SYMLINKS += \
213	Frameworks/QtGuiVBox.framework/Resources=>Versions/4/Resources/
214	endif
215	else ifeq ($(KBUILD_TARGET),win)
216	qt4-bin_INST = $(INST_BIN)
217	qt4-bin_SOURCES = \
218	$(VBOX_PATH_QT4_LIB)/QtCoreVBox4.dll \
219	$(VBOX_PATH_QT4_LIB)/QtGuiVBox4.dll \
220	$(VBOX_PATH_QT4_LIB)/QtNetworkVBox4.dll \
221	$(if $(VBOX_GUI_USE_QGL), $(VBOX_PATH_QT4_LIB)/QtOpenGLVBox4.dll,) \
222	$(VBOX_PATH_QT4)/plugins/accessible/qtaccessiblewidgets4.dll=>accessible/qtaccessiblewidgets4.dll
223	else
224	qt4-bin_INST = $(INST_BIN)
225	qt4-bin_SOURCES = \
226	$(VBOX_PATH_QT4_LIB)/libQtCoreVBox.so.4 \
227	$(VBOX_PATH_QT4_LIB)/libQtGuiVBox.so.4 \
228	$(VBOX_PATH_QT4_LIB)/libQtNetworkVBox.so.4 \
229	$(if $(VBOX_GUI_USE_QGL), $(VBOX_PATH_QT4_LIB)/libQtOpenGLVBox.so.4,) \
230	$(VBOX_PATH_QT4)/plugins/accessible/libqtaccessiblewidgets$(SUFF_DLL)=>accessible/libqtaccessiblewidgets$(SUFF_DLL)
231	endif
232	endif # VBOX_WITH_QT4_SUN
233
234
235	#
236	# For building the combined package, just get the additions .ISO
237	# once for amd64 to prevent version inconsistences. In all other
238	# cases we get the .ISO per target architecture.
239	#
240	ifdef VBOX_WITH_ADDITIONS_FROM_BUILD_SERVER
241	ifdef VBOX_WITH_COMBINED_PACKAGE
242	ifeq ($(KBUILD_TARGET_ARCH),amd64)
243	INSTALLS += buildserver-additions
244	endif
245	else
246	INSTALLS += buildserver-additions
247	endif
248
249	#
250	# Install additions iso from the build server.
251	# The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has
252	# been added to kBuild.
253	#
254	buildserver-additions_INST = $(INST_ADDITIONS_ISO)
255	buildserver-additions_MODE = 0644
256	buildserver-additions_SOURCES = $(PATH_TARGET)/VBoxGuestAdditions.iso
257	buildserver-additions_CLEANS = $(PATH_TARGET)/VBoxGuestAdditions.iso $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
258
259	$(PATH_TARGET)/VBoxGuestAdditions.iso: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/additions.sh \| $$(dir $$@)
260	$(RM) -f $(PATH_TARGET)/VBoxGuestAdditions.iso $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
261	ifneq ($(KBUILD_HOST),win)
262	$(SHELL) $(PATH_DEVTOOLS)/bin/additions.sh --cmd fetch --filename $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
263	else
264	$(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-additions-affinity-hack
265	endif
266	$(CP) -f $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp $(PATH_TARGET)/VBoxGuestAdditions.iso
267	$(RM) -f $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
268
269	ifeq ($(KBUILD_HOST),win)
270	buildserver-additions-affinity-hack:
271	$(SHELL) $(PATH_DEVTOOLS)/bin/additions.sh --cmd fetch --filename $(PATH_TARGET)/VBoxGuestAdditions.iso.tmp
272	endif
273	endif
274
275
276	#
277	#
278	# Install documentation files (at the moment the .chm) from the build server.
279	#
280	ifdef VBOX_WITH_DOCS_FROM_BUILD_SERVER
281	## @todo r=bird: Too much mess now for $(PATH_TARGET); move to doc/manual/.
282	INSTALLS += buildserver-docs
283	buildserver-docs_INST = $(INST_BIN)
284	buildserver-docs_MODE = 0644
285	buildserver-docs_SOURCES = \
286	$(addprefix $(PATH_TARGET)/, \
287	VirtualBox.chm UserManual.pdf \
288	$(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),VirtualBox_$(f).chm UserManual_$(f).pdf))
289	buildserver-docs_CLEANS = \
290	$(buildserver-docs_0_OUTDIR)/unpacked.ts \
291	$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip \
292	$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip.tmp \
293	$(addprefix $(PATH_TARGET)/, \
294	VirtualBox.chm UserManual.pdf \
295	$(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),VirtualBox_$(f).chm UserManual_$(f).pdf))
296
297	## @todo Hack to get at TOOL_ZIP_UNPACK; see if this can be integrated somehow...
298	include $(KBUILD_PATH)/tools/ZIP.kmk
299
300	$$(buildserver-docs_0_OUTDIR)/unpacked.ts +\| $(PATH_TARGET)/VirtualBox.chm $(PATH_TARGET)/UserManual.pdf \
301	$(foreach f,$(VBOX_MANUAL_ADD_LANGUAGES),$(PATH_TARGET)/VirtualBox_$(f).chm $(PATH_TARGET)/UserManual_$(f).pdf): \
302	$$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip
303	$(call MSG_L1,Unpacking documentation)
304	$(QUIET)$(TOOL_ZIP_UNPACK) $(TOOL_ZIP_UNPACKFLAGS) -o $< -d $(PATH_TARGET)
305	$(APPEND) -t $@ "done"
306
307	$$(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/documentation.sh \| $$(dir $$@)
308	$(RM) -f $@ [email protected]
309	ifneq ($(KBUILD_HOST),win)
310	$(SHELL) $(PATH_DEVTOOLS)/bin/documentation.sh --cmd fetch --filename [email protected]
311	else
312	$(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-documentation-affinity-hack
313	endif
314	$(CP) -f [email protected] $@
315	$(RM) -f [email protected]
316	## @todo kBuild: The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has been added to kBuild.
317
318	ifeq ($(KBUILD_HOST),win)
319	buildserver-documentation-affinity-hack:
320	$(SHELL) $(PATH_DEVTOOLS)/bin/documentation.sh --cmd fetch --filename $(buildserver-docs_0_OUTDIR)/VBoxDocumentation.zip.tmp
321	endif
322	endif # VBOX_WITH_DOCS_FROM_BUILD_SERVER
323
324
325	#
326	# Install EFI firmware image
327	#
328	ifdef VBOX_WITH_EFIFW_FROM_BUILD_SERVER
329	#
330	# Either from the build server.
331	#
332	INSTALLS += buildserver-efifw
333	buildserver-efifw_INST = $(INST_BIN)
334	buildserver-efifw_MODE = 0644
335	buildserver-efifw_SOURCES = \
336	$(buildserver-efifw_0_OUTDIR)/FV/VBOX.fd=>VBoxEFI32.fd \
337	$(buildserver-efifw_0_OUTDIR)/FV/VBOX64.fd=>VBoxEFI64.fd
338	buildserver-efifw_CLEANS = \
339	$(buildserver-efifw_0_OUTDIR)/unpacked.ts \
340	$(buildserver-efifw_0_OUTDIR)/FV/VBOX.fd \
341	$(buildserver-efifw_0_OUTDIR)/FV/VBOX64.fd \
342	$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip \
343	$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip.tmp
344	## @todo rainy day: cleanup the output directory (zip contains lots more)
345
346	## @todo Hack to get at TOOL_ZIP_UNPACK; see if this can be integrated somehow...
347	include $(KBUILD_PATH)/tools/ZIP.kmk
348
349	$$(buildserver-efifw_0_OUTDIR)/unpacked.ts +\| $$(buildserver-efifw_0_OUTDIR)/FV/VBOX.fd \
350	$$(buildserver-efifw_0_OUTDIR)/FV/VBOX64.fd: $$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip
351	$(call MSG_L1,Unpacking EFI firmware)
352	$(QUIET)$(TOOL_ZIP_UNPACK) $(TOOL_ZIP_UNPACKFLAGS) -o $< -d $(buildserver-efifw_0_OUTDIR)
353	$(APPEND) -t $@ "done"
354
355	$$(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip: $(VBOX_SVN_REV_KMK) $(PATH_DEVTOOLS)/bin/efi_firmware.sh \| $$(dir $$@)
356	$(RM) -f $@ [email protected]
357	ifneq ($(KBUILD_HOST),win)
358	$(SHELL) $(PATH_DEVTOOLS)/bin/efi_firmware.sh --cmd fetch --filename [email protected]
359	else
360	$(KMK) --affinity 1 -f $(MAKEFILE) VBOX_SINGLE_MAKEFILE= buildserver-efifw-affinity-hack
361	endif
362	$(CP) -f [email protected] $@
363	$(RM) -f [email protected]
364	## @todo kBuild: The $(CP)/$(RM) stuff can be replaced by a simple $(TOUCH) once that has been added to kBuild.
365
366	ifeq ($(KBUILD_HOST),win)
367	buildserver-efifw-affinity-hack:
368	$(SHELL) $(PATH_DEVTOOLS)/bin/efi_firmware.sh --cmd fetch --filename $(buildserver-efifw_0_OUTDIR)/VBoxEfiFirmware.zip.tmp
369	endif
370	else
371	#
372	# Or from the local copy
373	#
374	INSTALLS += local-efifw
375	local-efifw_INST = $(INST_BIN)
376	local-efifw_MODE = 0644
377	local-efifw_SOURCES = \
378	$(PATH_ROOT)/src/VBox/Devices/EFI/FirmwareBin/VBoxEFI32.fd=>VBoxEFI32.fd \
379	$(PATH_ROOT)/src/VBox/Devices/EFI/FirmwareBin/VBoxEFI64.fd=>VBoxEFI64.fd
380	endif # VBOX_WITH_EFIFW_FROM_BUILD_SERVER
381
382
383	#
384	# Install staged binaries on platforms where we can't cross
385	# compile things.
386	#
387	ifn1of ($(KBUILD_TARGET), l4 linux win)
388	VBOX_PATH_STAGED ?= .
389
390	# Additions.
391	ifndef VBOX_WITH_LINUX_ADDITIONS
392	ifndef VBOX_WITH_WIN32_ADDITIONS
393	ifneq ($(wildcard $(VBOX_PATH_STAGED)/VBoxGuestAdditions.iso),)
394	INSTALLS += staged-additions
395	staged-additions_INST = $(INST_ADDITIONS_ISO)
396	staged-additions_MODE = 0644
397	staged-additions_SOURCES = $(VBOX_PATH_STAGED)/VBoxGuestAdditions.iso
398	endif
399	endif
400	endif
401
402	# guesttool.exe
403	ifndef VBOX_WITH_WIN32_ADDITIONS
404	ifneq ($(wildcard $(VBOX_PATH_STAGED)/guesttool.exe),)
405	INSTALLS += staged-guesttool
406	staged-guesttool_INST = $(INST_BIN)
407	staged-guesttool_SOURCES = $(VBOX_PATH_STAGED)/guesttool.exe
408	endif
409	endif
410
411	endif
412
413	endif # !VBOX_ONLY_ADDITIONS
414	endif # !VBOX_ONLY_DOCS
415
416
417	ifdef VBOX_ONLY_DOCS
418	# It may sound a bit odd, but for preparing the documentation package the
419	# doxygen documentation isn't needed and increases the build time a lot.
420	docs:
421	else # !VBOX_ONLY_DOCS
422	#
423	# Generate documentation.
424	# (This should be converted into a separate pass or merged with an existing one later.)
425	#
426	ifdef VBOX_SINGLE_MAKEFILE
427	ifdef VBOX_WITH_ALL_DOXYGEN_TARGETS
428	docs: docs.Core
429	endif
430	else # !VBOX_SINGLE_MAKEFILE
431	docs: $(if $(VBOX_WITH_ALL_DOXYGEN_TARGETS),docs.Core)
432	$(KMK) -C src/VBox/Main docs.Main
433	ifdef VBOX_WITH_ALL_DOXYGEN_TARGETS
434	$(KMK) -C src/VBox/Runtime docs.iprt
435	endif
436	endif # !VBOX_SINGLE_MAKEFILE
437	endif # !VBOX_ONLY_DOCS
438
439	docs.Core docs.core: $(PATH_TARGET)/docs.Core
440
441
442
443	#
444	# The core (VMM+REM+Devices+Main) documentation.
445	#
446	# This includes so much because we wish to have the complete CFGM
447	# and GCFGM lists.
448	#
449	OTHER_CLEAN += \
450	$(PATH_TARGET)/Doxyfile.Core \
451	$(PATH_TARGET)/Doxyfile.Core.dep
452
453	VBOX_CORE_DOXYFILE_INPUT_DIRS = \
454	include/iprt \
455	include/iprt/cpp \
456	include/iprt/linux \
457	include/VBox \
458	include/VBox/com \
459	include/VBox/HostServices \
460	include/VBox/GuestHost \
461	include/VBox/HGSMI \
462	src/VBox/VMM \
463	src/VBox/VMM/VMMR0 \
464	src/VBox/VMM/VMMGC \
465	src/VBox/VMM/VMMAll \
466	src/VBox/VMM/PATM \
467	src/VBox/VMM/PATM/VMMR0 \
468	src/VBox/VMM/PATM/VMMGC \
469	src/VBox/VMM/PATM/VMMAll \
470	src/VBox/VMM/VMMSwitcher \
471	src/VBox/Debugger \
472	src/VBox/Devices \
473	src/VBox/Devices/Audio \
474	src/VBox/Devices/Bus \
475	src/VBox/Devices/Graphics \
476	src/VBox/Devices/Graphics/BIOS \
477	src/VBox/Devices/Input \
478	src/VBox/Devices/Networking \
479	src/VBox/Devices/PC \
480	src/VBox/Devices/PC/BIOS \
481	src/VBox/Devices/Parallel \
482	src/VBox/Devices/Serial \
483	src/VBox/Devices/Storage \
484	src/VBox/Devices/VBoxHDDFormats \
485	src/VBox/Devices/VBoxHDDFormats/StorageCraft \
486	src/VBox/Devices/USB \
487	src/VBox/Devices/USB/darwin \
488	src/VBox/Devices/USB/linux \
489	src/VBox/Devices/USB/os2 \
490	src/VBox/Devices/USB/solaris \
491	src/VBox/Devices/USB/vrdp \
492	src/VBox/Devices/USB/win32 \
493	src/VBox/Devices/VMMDev \
494	src/VBox/Main/include \
495	src/VBox/Main/include/hgcm \
496	src/VBox/Main \
497	src/VBox/Main/glue \
498	src/VBox/Main/hgcm \
499	src/VBox/Main/webservice \
500	src/VBox/Main/xml \
501	src/VBox/Main/darwin \
502	src/VBox/Main/linux \
503	src/VBox/Main/os2 \
504	src/VBox/Main/solaris \
505	src/VBox/Main/win \
506	src/VBox/Main/xpcom \
507	src/VBox/HostServices \
508	src/VBox/HostServices/SharedClipboard \
509	src/VBox/HostServices/SharedFolders \
510	src/VBox/HostServices/SharedInfoServices \
511	src/VBox/HostServices/SharedOpenGL \
512	src/VBox/HostDrivers/Support \
513	src/VBox/HostDrivers/Support/darwin \
514	src/VBox/HostDrivers/Support/freebsd \
515	src/VBox/HostDrivers/Support/l4 \
516	src/VBox/HostDrivers/Support/linux \
517	src/VBox/HostDrivers/Support/os2 \
518	src/VBox/HostDrivers/Support/solaris \
519	src/VBox/HostDrivers/Support/win \
520	src/VBox/HostDrivers/VBoxNetFlt \
521	src/VBox/HostDrivers/VBoxNetFlt/darwin \
522	src/VBox/HostDrivers/VBoxNetFlt/linux \
523	src/VBox/HostDrivers/VBoxNetFlt/solaris \
524	src/VBox/HostDrivers/VBoxNetFlt/win \
525	src/VBox/HostDrivers/VBoxNetNat \
526	src/VBox/HostDrivers/VBoxNetNat/darwin \
527	src/VBox/HostDrivers/VBoxNetNat/linux \
528	src/VBox/HostDrivers/VBoxNetNat/solaris \
529	src/VBox/HostDrivers/VBoxNetNat/win \
530	src/VBox/HostDrivers/VBoxNetAdp \
531	src/VBox/HostDrivers/VBoxNetAdp/darwin \
532	src/VBox/HostDrivers/VBoxNetAdp/linux \
533	src/VBox/HostDrivers/VBoxNetAdp/solaris \
534	src/VBox/HostDrivers/VBoxNetAdp/win \
535	src/VBox/HostDrivers/VBoxUSB \
536	src/VBox/HostDrivers/VBoxUSB/darwin \
537	src/VBox/HostDrivers/VBoxUSB/os2 \
538	src/VBox/HostDrivers/VBoxUSB/solaris \
539	src/VBox/HostDrivers/VBoxUSB/win \
540	src/VBox/HostDrivers/VBoxUSB/win/Device \
541	src/VBox/HostDrivers/VBoxUSB/win/Device/amd64 \
542	src/VBox/HostDrivers/VBoxUSB/win/Device/x86 \
543	src/VBox/HostDrivers/VBoxUSB/win/Filter \
544	src/VBox/HostDrivers/VBoxUSB/win/Install \
545	src/VBox/HostDrivers/VBoxUSB/win/Monitor \
546	src/VBox/HostDrivers/VBoxUSB/win/Monitor/win32 \
547	src/VBox/HostDrivers/VBoxUSB/win/Monitor/win64 \
548	src/VBox/HostDrivers/VBoxUSB/win/usbd \
549
550	# These must come first in order to make things look nice.
551	VBOX_CORE_DOXYFILE_INPUT_FIRST =\
552	$(PATH_ROOT)/doc/VBox-doc.c \
553	$(PATH_ROOT)/doc/VBox-CodingGuidelines.cpp \
554	$(PATH_ROOT)/doc/VBox-MakefileGuidelines.cpp \
555	$(PATH_ROOT)/src/VBox/VMM/VMMCodingGuidelines.cpp \
556	$(PATH_ROOT)/src/VBox/VMM/VMMDocsRawMode.cpp \
557	$(PATH_ROOT)/include/VBox/cdefs.h \
558	$(PATH_ROOT)/include/VBox/vmapi.h \
559	$(PATH_ROOT)/include/VBox/vmm.h \
560	$(PATH_ROOT)/include/VBox/cpum.h \
561	$(PATH_ROOT)/include/VBox/mm.h \
562	$(PATH_ROOT)/include/VBox/pgm.h \
563	$(PATH_ROOT)/include/VBox/selm.h \
564	$(PATH_ROOT)/include/VBox/trpm.h \
565	$(PATH_ROOT)/include/VBox/patm.h \
566	$(PATH_ROOT)/include/VBox/dbgf.h \
567	$(PATH_ROOT)/include/VBox/stam.h \
568	$(PATH_ROOT)/include/VBox/em.h \
569	$(PATH_ROOT)/include/VBox/pdm.h \
570	$(PATH_ROOT)/include/VBox/rem.h \
571	$(PATH_ROOT)/include/VBox/iom.h \
572	$(PATH_ROOT)/include/VBox/cfgm.h \
573	$(PATH_ROOT)/include/VBox/tm.h \
574	$(PATH_ROOT)/include/VBox/csam.h \
575	$(PATH_ROOT)/include/VBox/ssm.h \
576	$(PATH_ROOT)/include/VBox/hwaccm.h \
577	$(PATH_ROOT)/include/VBox/hwacc_svm.h \
578	$(PATH_ROOT)/include/VBox/hwacc_vmx.h \
579	\
580	$(PATH_ROOT)/src/VBox/VMM/CFGMInternal.h \
581	$(PATH_ROOT)/src/VBox/VMM/CPUMInternal.h \
582	$(PATH_ROOT)/src/VBox/VMM/DBGFInternal.h \
583	$(PATH_ROOT)/src/VBox/VMM/EMInternal.h \
584	$(PATH_ROOT)/src/VBox/VMM/HWACCMInternal.h \
585	$(PATH_ROOT)/src/VBox/VMM/IOMInternal.h \
586	$(PATH_ROOT)/src/VBox/VMM/MMInternal.h \
587	$(PATH_ROOT)/src/VBox/VMM/PDMInternal.h \
588	$(PATH_ROOT)/src/VBox/VMM/PGMInternal.h \
589	$(PATH_ROOT)/src/VBox/VMM/PATM/CSAMInternal.h \
590	$(PATH_ROOT)/src/VBox/VMM/PATM/PATMInternal.h \
591	$(PATH_ROOT)/src/VBox/VMM/REMInternal.h \
592	$(PATH_ROOT)/src/VBox/VMM/SELMInternal.h \
593	$(PATH_ROOT)/src/VBox/VMM/SSMInternal.h \
594	$(PATH_ROOT)/src/VBox/VMM/STAMInternal.h \
595	$(PATH_ROOT)/src/VBox/VMM/TMInternal.h \
596	$(PATH_ROOT)/src/VBox/VMM/TRPMInternal.h \
597	$(PATH_ROOT)/src/VBox/VMM/VMInternal.h \
598	$(PATH_ROOT)/src/VBox/VMM/VMMInternal.h \
599	\
600	$(PATH_ROOT)/include/VBox/vm.h \
601	\
602	$(PATH_ROOT)/include/VBox/sup.h \
603	$(PATH_ROOT)/include/VBox/VBoxHDD.h \
604	$(PATH_ROOT)/include/VBox/types.h \
605	$(PATH_ROOT)/include/VBox/err.h \
606	$(PATH_ROOT)/include/VBox/x86.h \
607	$(PATH_ROOT)/include/VBox/cpumdis.h \
608	$(PATH_ROOT)/include/VBox/dbggui.h \
609	$(PATH_ROOT)/include/VBox/dis.h \
610	$(PATH_ROOT)/include/VBox/disopcode.h \
611	$(PATH_ROOT)/include/VBox/intnet.h \
612	$(PATH_ROOT)/include/VBox/settings.h \
613	$(PATH_ROOT)/include/VBox/pci.h \
614	$(PATH_ROOT)/include/VBox/scsi.h \
615	$(PATH_ROOT)/include/VBox/shflsvc.h \
616	$(PATH_ROOT)/include/VBox/hgcmsvc.h \
617	$(PATH_ROOT)/include/VBox/usb.h \
618	$(PATH_ROOT)/include/VBox/vusb.h \
619	\
620	$(PATH_ROOT)/include/VBox/log.h \
621	$(PATH_ROOT)/include/VBox/param.h \
622	$(PATH_ROOT)/include/VBox/version.h
623
624	VBOX_CORE_DOXYFILE_INPUT := \
625	$(filter-out %.cpp.h, $(sort $(wildcard $(addsuffix /*.h, $(VBOX_CORE_DOXYFILE_INPUT_DIRS)))) ) \
626	$(foreach dir, $(VBOX_CORE_DOXYFILE_INPUT_DIRS), $(wildcard $(dir)/.cpp $(dir)/.c $(dir)/.asm))
627	VBOX_CORE_DOXYFILE_INPUT := \
628	$(VBOX_CORE_DOXYFILE_INPUT_FIRST) \
629	$(filter-out $(VBOX_CORE_DOXYFILE_INPUT_FIRST), $(VBOX_CORE_DOXYFILE_INPUT))
630
631	# And some some additional stuff.
632	VBOX_CORE_DOXYFILE_INPUT += \
633	$(PATH_ROOT)/src/recompiler/VBoxRecompiler.c \
634	$(PATH_ROOT)/src/recompiler/VBoxREMWrapper.cpp
635
636
637	VBOX_CORE_DOXYFILE_OUTPUT = $(PATH_OUT)/docs/Core
638	BLDDIRS += $(VBOX_CORE_DOXYFILE_OUTPUT)
639
640	-include $(PATH_TARGET)/Doxyfile.Core.dep
641
642	# Generate the Doxyfile
643	$(PATH_TARGET)/Doxyfile.Core: Doxyfile.Core \
644	$(comp-vars VBOX_CORE_DOXYFILE_INPUT,DOXYGEN_INPUT_PREV,FORCE) \
645	$(comp-vars VBOX_CORE_DOXYFILE_OUTPUT,DOXYGEN_OUTPUT_PREV,FORCE) \
646	\| $$(dir $$@)
647	$(RM) -f $@ [email protected] $(PATH_TARGET)/Doxyfile.Core.dep
648	$(CP) -f Doxyfile.Core [email protected]
649	$(APPEND) [email protected]
650	$(APPEND) [email protected] "OUTPUT_DIRECTORY = $(VBOX_CORE_DOXYFILE_OUTPUT)"
651	$(APPEND) [email protected] "WARN_LOGFILE = $(VBOX_CORE_DOXYFILE_OUTPUT)/errors"
652	$(APPEND) [email protected] "INCLUDE_PATH = $(PATH_ROOT)/include $(PATH_ROOT)/src/VBox/VMM $(PATH_ROOT)/src/VBox/Main/include "
653	$(APPEND) [email protected] "INCLUDE_FILE_PATTERNS = *.cpp.h"
654	$(APPEND) [email protected]
655	$(APPEND) [email protected] "INPUT = $(VBOX_CORE_DOXYFILE_INPUT)"
656	$(APPEND) [email protected]
657	$(APPEND) [email protected] "PREDEFINED += $(DEFS) $(DEFS.$(KBUILD_TARGET)) $(DEFS.$(KBUILD_TARGET_ARCH)) $(ARCH_BITS_DEFS)"
658	$(APPEND) [email protected] "PREDEFINED += ARCH_BITS=HC_ARCH_BITS R3_ARCH_BITS=HC_ARCH_BITS R0_ARCH_BITS=HC_ARCH_BITS "
659	$(APPEND) [email protected]
660	$(MV) -f [email protected] $@
661	@$(APPEND) $(PATH_TARGET)/Doxyfile.Core.dep "DOXYGEN_OUTPUT_PREV = $(VBOX_CORE_DOXYFILE_OUTPUT)"
662	@$(APPEND) $(PATH_TARGET)/Doxyfile.Core.dep "DOXYGEN_INPUT_PREV = $(VBOX_CORE_DOXYFILE_INPUT)"
663
664	# Do the actual job.
665	$(PATH_TARGET)/docs.Core: $(PATH_TARGET)/Doxyfile.Core $$(VBOX_CORE_DOXYFILE_INPUT) \| $(VBOX_CORE_DOXYFILE_OUTPUT)/
666	$(RM) -f $(PATH_TARGET)/docs.Core
667	$(RM) -Rf $(VBOX_CORE_DOXYFILE_OUTPUT)/html/
668	doxygen $(PATH_TARGET)/Doxyfile.Core
669	$(APPEND) $(PATH_TARGET)/docs.Core
670
671
672
673	#
674	# Build the additions, all of them.
675	#
676	# This is currently tailored (hardcoded) for the additions
677	# build box. Can make it pretty and configurable later.
678	#
679	# The fetching must be done in serial fashion, while the building
680	# should be more flexible wrt to -jN.
681	#
682	additions-fetch:
683	+ $(KMK) -C tools fetch
684	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=linux BUILD_TARGET_ARCH=amd64 BUILD_TARGET=linux
685	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=linux BUILD_TARGET_ARCH=x86 BUILD_TARGET=linux
686	# + $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=os2 BUILD_TARGET_ARCH=x86 BUILD_TARGET=os2
687	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=solaris BUILD_TARGET_ARCH=amd64 BUILD_TARGET=solaris
688	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=solaris BUILD_TARGET_ARCH=x86 BUILD_TARGET=solaris
689	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=amd64 KBUILD_TARGET=win BUILD_TARGET_ARCH=amd64 BUILD_TARGET=win
690	+ $(KMK) -C tools fetch KBUILD_TARGET_ARCH=x86 KBUILD_TARGET=win BUILD_TARGET_ARCH=x86 BUILD_TARGET=win
691
692
693	## @todo Currently combined solaris additions building assumes that amd64 is
694	# built first. The windows amd64 additions need some x86 files, so don't change
695	# the order of the windows builds. TODO: Split building and packing for these two VMs.
696	additions-build: \
697	additions-build-solaris.amd64 \
698	additions-build-solaris.x86 \
699	additions-build-win.x86 \
700	additions-build-win.amd64 \
701	additions-build-os2.x86 \
702	additions-build-linux.amd64 \
703	additions-build-linux.x86
704
705	VBOX_ADDITIONS_BUILD.amd64 = VBOX_ONLY_ADDITIONS=1 VBOX_WITHOUT_ADDITIONS_ISO=1 \
706	KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
707	KBUILD_TARGET_ARCH=amd64 BUILD_TARGET_ARCH=amd64 \
708	VBOX_SVN_REV=$(VBOX_SVN_REV)
709
710	VBOX_ADDITIONS_BUILD.x86 = VBOX_ONLY_ADDITIONS=1 VBOX_WITHOUT_ADDITIONS_ISO=1 \
711	KBUILD_TYPE=$(KBUILD_TYPE) BUILD_TYPE=$(KBUILD_TYPE) \
712	KBUILD_TARGET_ARCH=x86 BUILD_TARGET_ARCH=x86 \
713	VBOX_SVN_REV=$(VBOX_SVN_REV)
714
715	# Automatically determine the additions build subdir name. Used for figuring
716	# out directory names inside the additions building VMs.
717	VBOX_ADDITIONS_BUILD_SUBDIRNAME := $(lastword $(subst /, ,$(PATH_ROOT)))
718
719	VBOX_KMK_TIME = $(KBUILD_BIN_PATH)/kmk_time
720
721	# When building in parallel on a Windows host, make sure we finish the host
722	# bit before kicking off any UNIX guest or we'll run into file sharing issues.
723	ifeq ($(KBUILD_TARGET),win)
724	VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST = additions-build-win.x86 additions-build-win.amd64
725	else
726	VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST =
727	endif
728
729	# ASSUMES the 32-bit edition has been built already. Also for serializing VM access.
730	additions-build-win.amd64: additions-build-win.x86
731	ifeq ($(KBUILD_TARGET),win)
732	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) all $(VBOX_ADD_HOST_BUILD_TWEAK)
733	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) packing
734	else
735	$(call MSG_L1,Building Windows/amd64 additions)
736	$(VBOX_KMK_TIME) ssh [email protected] " echo $@ && cd e:/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_ADDITIONS_BUILD.amd64) all packing "
737	endif
738
739	additions-build-win.x86:
740	ifeq ($(KBUILD_TARGET),win)
741	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) all $(VBOX_ADD_HOST_BUILD_TWEAK)
742	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) packing
743	else
744	$(call MSG_L1,Building Windows/x86 additions)
745	$(VBOX_KMK_TIME) ssh [email protected] " echo $@ && cd e:/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh kmk $(VBOX_ADDITIONS_BUILD.x86) all packing"
746	endif
747
748	# ASSUMES the 64-bit edition are built first. This also serializes VM access.
749	ifeq ($(KBUILD_TARGET),solaris)
750	additions-build-solaris.amd64:
751	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) all $(VBOX_ADD_HOST_BUILD_TWEAK)
752	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) packing
753
754	additions-build-solaris.x86: additions-build-solaris.amd64
755	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 all $(VBOX_ADD_HOST_BUILD_TWEAK)
756	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 packing
757
758	else
759	additions-build-solaris.rsync-into-vm: $(VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST)
760	$(VBOX_KMK_TIME) rsync -a --delete --delete-excluded --exclude .svn --exclude FetchDir --exclude tinderclient.log --exclude win.amd64 --exclude win.x86 . 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)
761
762	additions-build-solaris.build-it: additions-build-solaris.rsync-into-vm
763	$(call MSG_L1,Building Solaris/amd64 additions)
764	$(VBOX_KMK_TIME) ssh [email protected] " echo $@/amd64 && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.amd64) all packing"
765	$(call MSG_L1,Building Solaris/x86 additions)
766	$(VBOX_KMK_TIME) ssh [email protected] " echo $@/x86 && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) all packing VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1"
767
768	additions-build-solaris.rsync-out-of-vm: additions-build-solaris.build-it
769	$(VBOX_KMK_TIME) rsync -a --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)/out/solaris.x86 out/
770	$(VBOX_KMK_TIME) rsync -a --delete 192.168.27.4:/mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME)/out/solaris.amd64 out/
771
772	.NOTPARALLEL: additions-build-solaris.rsync-out-of-vm additions-build-solaris.rsync-into-vm
773	.PHONY: additions-build-solaris.rsync-out-of-vm additions-build-solaris.rsync-into-vm additions-build-solaris.build-it
774
775	additions-build-solaris.amd64: additions-build-solaris.rsync-out-of-vm
776	additions-build-solaris.x86: additions-build-solaris.rsync-out-of-vm
777	endif
778
779	additions-build-os2.x86:
780	#ifeq ($(KBUILD_TARGET),os2)
781	# + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) all $(VBOX_ADD_HOST_BUILD_TWEAK)
782	# + $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) packing
783	#else
784	# $(VBOX_KMK_TIME) ssh [email protected] " cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) "
785	#endif
786
787	additions-build-linux.amd64: $(VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST)
788	ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.amd64)
789	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) all $(VBOX_ADD_HOST_BUILD_TWEAK)
790	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.amd64) packing
791	else
792	$(call MSG_L1,Building Linux/amd64 additions)
793	$(VBOX_KMK_TIME) ssh [email protected] " echo $@ && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.amd64) all packing"
794	endif
795
796	additions-build-linux.x86: $(VBOX_ADDITIONS_BUILD_WIN_HOST_FIRST)
797	ifeq ($(KBUILD_TARGET).$(KBUILD_TARGET_ARCH),linux.x86)
798	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) all $(VBOX_ADD_HOST_BUILD_TWEAK)
799	+ $(VBOX_KMK_TIME) $(KMK) $(VBOX_ADDITIONS_BUILD.x86) packing
800	else
801	$(call MSG_L1,Building Linux/x86 additions)
802	$(VBOX_KMK_TIME) ssh [email protected] " echo $@ && cd /mnt/tinderbox/$(VBOX_ADDITIONS_BUILD_SUBDIRNAME) && tools/env.sh --no-wine kmk $(VBOX_ADDITIONS_BUILD.x86) all packing"
803	endif
804
805
806	additions-packing:
807	+ $(KMK) VBOX_ONLY_ADDITIONS=1 \
808	VBOX_WITH_ADDITIONS_ISO.freebsd.amd64= \
809	VBOX_WITH_ADDITIONS_ISO.freebsd.x86= \
810	VBOX_WITH_ADDITIONS_ISO.linux.amd64=1 \
811	VBOX_WITH_ADDITIONS_ISO.linux.x86=1 \
812	VBOX_WITH_ADDITIONS_ISO.solaris.amd64=1 \
813	VBOX_WITH_ADDITIONS_ISO.solaris.x86=1 \
814	VBOX_WITH_COMBINED_SOLARIS_GUEST_PACKAGE=1 \
815	VBOX_WITH_ADDITIONS_ISO.win.amd64=1 \
816	VBOX_WITH_ADDITIONS_ISO.win.x86=1 \
817	-C src/VBox/Additions \
818	$(VBOX_PATH_ADDITIONS)/VBoxGuestAdditions.iso
819
820	.PHONY: \
821	additions-build-win.x86 \
822	additions-build-win.amd64 \
823	additions-build-solaris.amd64 \
824	additions-build-solaris.x86 \
825	additions-build-os2.x86 \
826	additions-build-linux.amd64 \
827	additions-build-linux.x86 \
828	additions-packing
829
830
831	#
832	# Build the EFI firmware, all of it.
833	#
834	# Mainly hooks right now, maybe we need them later.
835	#
836	efi-fetch:
837
838	efi-build: $(VBOX_VERSION_HEADER)
839	$(PATH_ROOT)/webtools/tinderbox/client/efi-build.sh
840
841	efi-packing:
842
843	#
844	# Generate VirtualBox-OSE-x.x.x.tar.bz2 (OSE) tarballs for distribution
845	# - includes kBuild
846	# - must be executed on an OSE checkout
847	#
848
849	# the path where to store the tarball
850	TARBALLPATH ?= $(abspath $(PATH_ROOT)/..)
851	# the root directory inside the tarball
852	TARBALLROOT ?= VirtualBox-$(VBOX_VERSION_STRING)
853	# the name of the tarball file
854	TARBALLNAME ?= VirtualBox-$(VBOX_VERSION_STRING).tar.bz2
855	snapshot-ose:
856	@$(call MSG_L1,Creating tarball $(TARBALLPATH)/$(TARBALLNAME))
857	@if [ -d "$(PATH_ROOT)/src/VBox/Devices/USB" ]; then \
858	echo; \
859	echo "Found USB stuff, refused to build OSE tarball!"; \
860	echo; \
861	exit 1; \
862	fi; \
863	if [ -z "$(VBOX_OSE)" ]; then \
864	echo; \
865	echo "Please do 'kmk snapshot-ose VBOX_OSE=1'"; \
866	echo; \
867	exit 1; \
868	fi
869	$(QUIET)$(MKDIR) -p $(TARBALLPATH)
870	$(QUIET)$(RM) -f $(TARBALLPATH)/$(TARBALLROOT)
871	$(QUIET)$(LN_SYMLINK) $(PATH_ROOT) $(TARBALLPATH)/$(TARBALLROOT)
872	$(QUIET)tar -cjh --owner 0 --group 0 --totals \
873	--exclude=.svn \
874	--exclude=$(TARBALLROOT)/out \
875	--exclude=$(TARBALLROOT)/env.sh \
876	--exclude=$(TARBALLROOT)/configure.log \
877	--exclude=$(TARBALLROOT)/build.log \
878	--exclude=$(TARBALLROOT)/AutoConfig.kmk \
879	--exclude=$(TARBALLROOT)/LocalConfig.kmk \
880	--exclude=$(TARBALLROOT)/prebuild \
881	-C $(TARBALLPATH) \
882	-f $(TARBALLPATH)/$(TARBALLNAME) \
883	$(TARBALLROOT)
884	$(QUIET)$(RM) $(TARBALLPATH)/$(TARBALLROOT)
885
886
887	#
888	# Generate VirtualBox-x.x.x.tar.bz2 (PUEL) zip archives for internal use only
889	# - includes kBuild
890	# - must be executed on an PUEL checkout
891	#
892
893	# the path where to store the zip archive
894	ZIPPATH ?= $(abspath $(PATH_ROOT)/..)
895	# the root directory inside the zip archive
896	ZIPROOT ?= VirtualBox-$(VBOX_VERSION_STRING)
897	# the name of the zip archive
898	ZIPNAME ?= VirtualBox-$(VBOX_VERSION_STRING).zip
899	snapshot-puel:
900	@$(call MSG_L1,Creating zip $(ZIPPATH)/$(ZIPNAME))
901	@if [ ! -d "$(PATH_ROOT)/src/VBox/Devices/USB" ]; then \
902	echo; \
903	echo "Did not find USB stuff, is this an OSE branch?"; \
904	echo; \
905	exit 1; \
906	fi
907	@if [ -z "$(PASSWORD)" ]; then \
908	echo; \
909	echo "Please specify a password with PASSWORD=..."; \
910	echo; \
911	exit 1; \
912	fi
913	$(QUIET)$(MKDIR) -p $(ZIPPATH)
914	$(QUIET)$(RM) -f $(ZIPPATH)/$(ZIPROOT)
915	$(QUIET)$(RM) -f $(ZIPPATH)/$(ZIPNAME)
916	$(QUIET)$(LN_SYMLINK) $(PATH_ROOT) $(ZIPPATH)/$(ZIPROOT)
917	$(QUIET)(cd $(ZIPPATH); 7z a \
918	-l -tzip -mmt=on -mx=7 -p$(PASSWORD) \
919	-xr!.svn \
920	-i!$(ZIPROOT)/Config.kmk \
921	-i!$(ZIPROOT)/Doxyfile.Core \
922	-i!$(ZIPROOT)/Makefile.kmk \
923	-i!$(ZIPROOT)/configure \
924	-i!$(ZIPROOT)/configure.vbs \
925	-i!$(ZIPROOT)/doc \
926	-i!$(ZIPROOT)/include \
927	-i!$(ZIPROOT)/kBuild \
928	-i!$(ZIPROOT)/src \
929	-i!$(ZIPROOT)/tools/env.sh \
930	-i!$(ZIPROOT)/tools/linux.x86/bin/* \
931	-i!$(ZIPROOT)/tools/linux.amd64/bin/* \
932	-x!$(ZIPROOT)/doc/Devices \
933	-x!$(ZIPROOT)/doc/\*pdf \
934	-x!$(ZIPROOT)/doc/L4VM \
935	-x!$(ZIPROOT)/doc/VMM \
936	-x!$(ZIPROOT)/doc/licenses_old \
937	-x!$(ZIPROOT)/doc/manual/de_DE \
938	-x!$(ZIPROOT)/doc/manual/fr_FR \
939	-x!$(ZIPROOT)/src/tests \
940	-x!$(ZIPROOT)/src/VBox/Artwork/2008-\* \
941	-x!$(ZIPROOT)/src/VBox/Installer/AMI \
942	-x!$(ZIPROOT)/src/VBox/Installer/Avanquest \
943	-x!$(ZIPROOT)/src/VBox/Installer/Encore \
944	-x!$(ZIPROOT)/src/VBox/Installer/linux/debian \
945	-x!$(ZIPROOT)/src/VBox/Installer/linux/rpm \
946	$(ZIPPATH)/$(ZIPNAME))
947	$(QUIET)$(RM) $(ZIPPATH)/$(ZIPROOT)
948
949
950	#
951	# Generate ALL the rules.
952	#
953	include $(KBUILD_PATH)/subfooter.kmk
954
955
956	#
957	# Generate x86.mac and err.mac.
958	#
959	incs:
960	$(SED) -f include/VBox/err.sed --output include/VBox/err.mac include/VBox/err.h
961	$(APPEND) include/VBox/err.mac '%include "iprt/err.mac"'
962	$(SED) -f include/VBox/err.sed --output include/iprt/err.mac include/iprt/err.h
963	$(SED) -f include/VBox/various.sed --output include/VBox/x86.mac include/VBox/x86.h
964	$(SED) -f include/VBox/various.sed --output include/VBox/param.mac include/VBox/param.h
965
966
967	#
968	# Generate Visual SlickEdit tagging #defines.
969	#
970	vslick.h: include/VBox/cdefs.h include/iprt/cdefs.h $(MAKEFILE)
971	$(RM) -f -- $@ [email protected] [email protected] [email protected]
972	$(APPEND) [email protected] '// autogenerated'
973	@$(APPEND) [email protected] '#define RT_C_DECLS_BEGIN '
974	@$(APPEND) [email protected] '#define RT_C_DECLS_END '
975
976	@$(APPEND) [email protected] '#define ATL_NO_VTABLE '
977	@$(APPEND) [email protected] '#define BEGIN_COM_MAP(a) '
978	@$(APPEND) [email protected] '#define COM_INTERFACE_ENTRY(a) '
979	@$(APPEND) [email protected] '#define COM_INTERFACE_ENTRY2(a,b) '
980	@$(APPEND) [email protected] '#define COM_INTERFACE_ENTRY3(a,b,c) '
981	@$(APPEND) [email protected] '#define COM_INTERFACE_ENTRY4(a,b,c,d) '
982	@$(APPEND) [email protected] '#define END_COM_MAP(a) '
983
984	@$(APPEND) [email protected] '#define COM_DECL_READONLY_ENUM_AND_COLLECTION(a) '
985	@$(APPEND) [email protected] '#define COMGETTER(n) Get##n '
986	@$(APPEND) [email protected] '#define COMSETTER(n) Set##n '
987	@$(APPEND) [email protected] '#define ComSafeArrayIn(t,a) t a[] '
988	@$(APPEND) [email protected] '#define ComSafeArrayOut(t,a) t * a[] '
989	@$(APPEND) [email protected] '#define DECLARE_CLASSFACTORY(a) '
990	@$(APPEND) [email protected] '#define DECLARE_CLASSFACTORY_SINGLETON(a) '
991	@$(APPEND) [email protected] '#define DECLARE_REGISTRY_RESOURCEID(a) '
992	@$(APPEND) [email protected] '#define DECLARE_NOT_AGGREGATABLE(a) '
993	@$(APPEND) [email protected] '#define DECLARE_PROTECT_FINAL_CONSTRUCT(a) '
994	@$(APPEND) [email protected] '#define DECLARE_EMPTY_CTOR_DTOR(a) a(); ~a();'
995	@$(APPEND) [email protected] '#define DEFINE_EMPTY_CTOR_DTOR(a) a::a() {} a::~a() {}'
996	@$(APPEND) [email protected] '#define NS_DECL_ISUPPORTS '
997	@$(APPEND) [email protected] '#define NS_IMETHOD virtual nsresult '
998	@$(APPEND) [email protected] '#define NS_IMETHOD_(type) virtual type '
999	@$(APPEND) [email protected] '#define NS_IMETHODIMP nsresult '
1000	@$(APPEND) [email protected] '#define NS_IMETHODIMP_(type) type '
1001	@$(APPEND) [email protected] '#define PARSERS_EXPORT '
1002	if1of ($(KBUILD_HOST),win)
1003	@$(APPEND) [email protected] '#define STDMETHOD(m) virtual HRESULT m '
1004	@$(APPEND) [email protected] '#define STDMETHOD_(type,m) virtual type m '
1005	@$(APPEND) [email protected] '#define STDMETHODIMP HRESULT '
1006	@$(APPEND) [email protected] '#define STDMETHODIMP_(type) type '
1007	else
1008	@$(APPEND) [email protected] '#define STDMETHOD(m) virtual nsresult m '
1009	@$(APPEND) [email protected] '#define STDMETHOD_(type,m) virtual type m '
1010	@$(APPEND) [email protected] '#define STDMETHODIMP nsresult '
1011	@$(APPEND) [email protected] '#define STDMETHODIMP_(type) type '
1012	endif
1013	@$(APPEND) [email protected] '#define VBOX_SCRIPTABLE(a) public a '
1014	@$(APPEND) [email protected] '#define VBOX_SCRIPTABLE_IMPL(a) '
1015	@$(APPEND) [email protected] '#define VIRTUALBOXBASE_ADD_ERRORINFO_SUPPORT(a) '
1016
1017	@$(APPEND) [email protected] '#define CTX_SUFF(var) var##R3 '
1018	@$(APPEND) [email protected] '#define CTXAllSUFF(var) var##R3 '
1019	@$(APPEND) [email protected] '#define CTXSUFF(var) var##HC '
1020	@$(APPEND) [email protected] '#define OTHERCTXSUFF(var) var##GC '
1021	@$(APPEND) [email protected] '#define CTXALLMID(first, last) first##R3##last '
1022	@$(APPEND) [email protected] '#define CTXMID(first, last) first##HC##last '
1023	@$(APPEND) [email protected] '#define OTHERCTXMID(first, last) first##GC##last '
1024	@$(APPEND) [email protected] '#define CTXTYPE(GCType, R3Type, R0Type) R3Type '
1025	@$(APPEND) [email protected] '#define RCTYPE(RCType, HCType) RCType '
1026	@$(APPEND) [email protected] '#define GCTYPE(GCType, HCType) GCType '
1027	@$(APPEND) [email protected] '#define RCPTRTYPE(RCType) RCType '
1028	@$(APPEND) [email protected] '#define GCPTRTYPE(GCType) GCType '
1029	@$(APPEND) [email protected] '#define HCPTRTYPE(HCType) HCType '
1030	@$(APPEND) [email protected] '#define R3R0PTRTYPE(HCType) HCType '
1031	@$(APPEND) [email protected] '#define R0PTRTYPE(R3Type) R3Type '
1032	@$(APPEND) [email protected] '#define R3PTRTYPE(R0Type) R0Type '
1033	@$(APPEND) [email protected] '#define RT_SRC_POS __FILE__, __LINE__, __PRETTY_FUNCTION__ '
1034	@$(APPEND) [email protected] '#define RT_SRC_POS_DECL const char pszFile, unsigned iLine, const char pszFunction '
1035	@$(APPEND) [email protected] '#define RT_SRC_POS_ARGS pszFile, iLine, pszFunction '
1036	@$(APPEND) [email protected] '#define RTCALL'
1037	@$(APPEND) [email protected] '#define DECLINLINE(type) inline type '
1038	@$(APPEND) [email protected] '#define DECL_FORCED_INLINE(type) inline type '
1039	@$(APPEND) [email protected] '#define DECL_INVALID(type) type '
1040
1041	@$(APPEND) [email protected] '#define PDMDEVINSINT_DECLARED 1'
1042	@$(APPEND) [email protected] '#define VBOX_WITH_HGCM 1'
1043	@$(APPEND) [email protected] '#define VBOXCALL'
1044
1045	$(SED) -e '/__cdecl/d' \
1046	-e '/^ # define.*DECL/!d' \
1047	-e '/DECLS/d' \
1048	-e '/DECLARE_CLS_/d' \
1049	-e '/_SRC_POS_DECL/d' \
1050	-e '/declspec/d' \
1051	-e '/__attribute__/d' \
1052	-e 's/# */#/g' \
1053	-e 's/ */ /g' \
1054	-e '/(type) DECLEXPORT/d' \
1055	-e '/ DECLEXPORT_CLASS/d' \
1056	-e 's/ *VBOXCALL//' \
1057	-e 's/ *RTCALL//' \
1058	-e 's/(type) DECLIMPORT(type)/(type) type/' \
1059	-e '/ DECLASM(type) type/d' \
1060	-e '/define DECL..CALLBACKMEMBER(type[^)]) *RT/d' \
1061	-e '/define *DECLINLINE(type)/d' \
1062	-e '/ *DECL_INVALID(/d' \
1063	-e '/define RT[DATGRC03]DECL(type) DECLHIDDEN(type)/d' \
1064	\
1065	--append [email protected] \
1066	$(filter-out include/VBox/err.h, $(wildcard include/VBox/*.h)) \
1067	include/iprt/cdefs.h
1068	$(CAT_EXT) [email protected] \| sort \| $(SED_EXT) -e 's/$$/\n/' --output [email protected]
1069	$(MV) -f [email protected] $@
1070	$(RM) -f [email protected] [email protected] [email protected]
1071	ifeq ($(KBUILD_HOST),win)
1072	@$(ECHO) 'TODO: Merge vslick.h with your "$(HOMEDRIVE)$(HOMEPATH)\Documents\My SlickEdit Config\x.y.z\usercpp.h" file.'
1073	else
1074	@$(ECHO) "TODO: Merge ./vslick.h with your ~/.slickedit/x.y.z/unxcpp.h file."
1075	endif
1076
1077
1078	#
1079	# Add fetching of the tools to the 'up[date][2]' targets.
1080	#
1081	up update up2 update2::
1082	ifndef VBOX_OSE
1083	+$(MAKE) -C tools fetch
1084	else
1085	$(MAKE) -C tools -f Makefile-ose.kmk fetch
1086	endif
1087
1088
1089
1090	#
1091	# Aliases for building the SDK.
1092	#
1093	.NOTPARALLEL: sdk sdk-fetch
1094	sdk:
1095	+ $(KMK) VBOX_ONLY_SDK=1 \
1096	pass_bldprogs pass_others pass_installs pass_packing
1097
1098	sdk-fetch:
1099	+ $(KMK) KBUILD_TARGET=win KBUILD_TARGET_ARCH=x86 -C tools fetch
1100

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format