gimdebughyperv.dita@ 105145

Last change on this file since 105145 was 98549, checked in by vboxsync, 2 years ago
Docs: bugref:10302. Uploading .dita user manual files we received from the doc team on 25th Jan.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 3.6 KB

Line
1	<?xml version='1.0' encoding='UTF-8'?>
2	<!DOCTYPE topic PUBLIC "-//OASIS//DTD DITA Topic//EN" "topic.dtd">
3	<topic xml:lang="en-us" id="gimdebughyperv">
4	<title>Hyper-V Debug Options</title>
5
6	<body>
7	<p>
8	All of the options listed below are optional, and thus the
9	default value specified will be used when the corresponding
10	key-value pair is not specified.
11	</p>
12	<ul>
13	<li>
14	<p>
15	Key:
16	<b outputclass="bold"><codeph>enabled</codeph></b>
17	</p>
18	<p>
19	Value: <codeph>0</codeph> or <codeph>1</codeph>
20	</p>
21	<p>
22	Default: <codeph>0</codeph>
23	</p>
24	<p>
25	Specify <codeph>1</codeph> to enable the Hyper-V debug
26	interface. If this key-value pair is not specified or the
27	value is not <codeph>1</codeph>, the Hyper-V debug
28	interface is disabled regardless of other key-value pairs
29	being present.
30	</p>
31	</li>
32	<li>
33	<p>
34	Key:
35	<b outputclass="bold"><codeph>address</codeph></b>
36	</p>
37	<p>
38	Value: IPv4 address
39	</p>
40	<p>
41	Default: 127.0.0.1
42	</p>
43	<p>
44	Specify the IPv4 address where the remote debugger is
45	connected.
46	</p>
47	</li>
48	<li>
49	<p>
50	Key:
51	<b outputclass="bold"><codeph>port</codeph></b>
52	</p>
53	<p>
54	Value: UDP port number
55	</p>
56	<p>
57	Default: 50000
58	</p>
59	<p>
60	Specify the UDP port number where the remote debugger is
61	connected.
62	</p>
63	</li>
64	<li>
65	<p>
66	Key:
67	<b outputclass="bold"><codeph>vendor</codeph></b>
68	</p>
69	<p>
70	Value: Hyper-V vendor signature reported by CPUID to the
71	guest
72	</p>
73	<p>
74	Default: When debugging is enabled: <codeph>Microsoft
75	Hv</codeph>, otherwise: <codeph>VBoxVBoxVBox</codeph>
76	</p>
77	<p>
78	Specify the Hyper-V vendor signature which is exposed to the
79	guest by CPUID. For debugging Microsoft Windows guests, it
80	is required the hypervisor reports the Microsoft vendor.
81	</p>
82	</li>
83	<li>
84	<p>
85	Key:
86	<b outputclass="bold"><codeph>hypercallinterface</codeph></b>
87	</p>
88	<p>
89	Value: <codeph>0</codeph> or <codeph>1</codeph>
90	</p>
91	<p>
92	Default: <codeph>0</codeph>
93	</p>
94	<p>
95	Specify whether hypercalls should be suggested for
96	initiating debug data transfers between host and guest
97	rather than MSRs when requested by the guest.
98	</p>
99	</li>
100	<li>
101	<p>
102	Key: <b outputclass="bold"><codeph>vsinterface</codeph></b>
103	</p>
104	<p>
105	Value: <codeph>0</codeph> or <codeph>1</codeph>
106	</p>
107	<p>
108	Default: When debugging is enabled, <codeph>1</codeph>,
109	otherwise <codeph>0</codeph>
110	</p>
111	<p>
112	Specify whether to expose the VS#1 virtualization service
113	interface to the guest. This interface is required for
114	debugging Microsoft Windows 10 32-bit guests, but is
115	optional for other Windows versions.
116	</p>
117	</li>
118	</ul>
119	</body>
120	</topic>

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format