source: vbox/trunk/doc/manual/en_US/man_VBoxManage-createvm.xml@ 103454

<?xml version="1.0" encoding="UTF-8"?>
<!--
    manpage, user manual, usage: VBoxManage createvm
-->
<!--
    Copyright (C) 2006-2023 Oracle and/or its affiliates.

    This file is part of VirtualBox base platform packages, as
    available from https://www.virtualbox.org.

    This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License
    as published by the Free Software Foundation, in version 3 of the
    License.

    This program is distributed in the hope that it will be useful, but
    WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, see <https://www.gnu.org/licenses>.

    SPDX-License-Identifier: GPL-3.0-only
-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"[
<!ENTITY % all.entities SYSTEM "all-entities.ent">
%all.entities;
]>
<refentry id="vboxmanage-createvm" lang="en">
  <refentryinfo>
    <pubdate>$Date: 2024-02-19 15:27:46 +0000 (Mon, 19 Feb 2024) $</pubdate>
    <title>VBoxManage createvm</title>
  </refentryinfo>

  <refmeta>
    <refentrytitle>VBoxManage-createvm</refentrytitle>
    <manvolnum>1</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>VBoxManage-createvm</refname>
    <refpurpose>create a new virtual machine</refpurpose>
    <refclass>&product-name;</refclass>
  </refnamediv>

  <refsynopsisdiv>
    <cmdsynopsis id="synopsis-vboxmanage-createvm">
<!-- The 'id' is mandatory and must start with 'synopsis-'. -->
      <command>VBoxManage createvm</command>
      <arg choice="req">--name=<replaceable>name</replaceable></arg>
      <arg choice="req">--platform-architecture=<group choice="plain">
        <arg choice="plain">x86</arg>
        <arg choice="plain">arm</arg>
      </group></arg>
      <arg>--basefolder=<replaceable>basefolder</replaceable></arg>
      <arg>--default</arg>
      <arg>--groups=<replaceable>group-ID</replaceable><arg rep="repeat">,</arg></arg>
      <arg>--ostype=<replaceable>ostype</replaceable></arg>
      <arg>--register</arg>
      <arg>--uuid=<replaceable>uuid</replaceable></arg>
      <arg>--cipher=<replaceable>cipher</replaceable></arg>
      <arg>--password-id=<replaceable>password-id</replaceable></arg>
      <arg>--password=<replaceable>file</replaceable></arg>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1 id="vboxmanage-createvm-description">
    <title>Description</title>
    <para>
      The <command>VBoxManage createvm</command> command creates a new
      XML virtual machine (VM) definition file.
    </para>
    <para>
      You must specify the name of the VM by using <option>--name
      <replaceable>name</replaceable></option>. This name is used by
      default as the name of the settings file that has the
      <filename>.vbox</filename> extension and the machine folder, which
      is a subfolder of the <filename>$HOME/VirtualBox VMs</filename>
      directory.
    </para>
    <para>
      The actual file name may not correspond directly to the VM name
      if it violates the host OS file name requirements (such as using
      the path separator or other reserved characters, they will be
      substituted with a placeholder). If you later rename the VM, the
      file and folder names will be updated to match the new name
      automatically.
    </para>
    <para>
      Also, the intended platform architecture for the VM must be specified by
      using <option>--platform-architecture<replaceable>architecture</replaceable>
      </option>.
    </para>
  </refsect1>

  <refsect1 id="vboxmanage-createvm-common-options">
    <title>Command Options</title>
    <para>
      In addition to specifying the name or UUID of the VM and the platform architecture, which is
      required, you can specify any of the following options:
    </para>
    <variablelist>
      <varlistentry>
        <term><option>--basefolder=<replaceable>basefolder</replaceable></option></term>
        <listitem><para>
            Specifies the name of the folder in which to save the
            machine configuration file for the new VM.
          </para><para>
            Note that the names of the file and the folder do not change
            if you rename the VM.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--default</option></term>
        <listitem><para>
            Applies a default hardware configuration for the specified
            guest OS. By default, the VM is created with minimal
            hardware.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--groups=<replaceable>group-ID</replaceable>[,...]</option></term>
        <listitem><para>
            Assigns the VM to the specified groups. If you specify more
            than one group, separate each group name with a comma.
          </para><para>
            Note that each group is identified by a group ID that starts
            with a slash character (<literal>/</literal>) so that groups
            can be nested. By default, a VM is always assigned
            membership to the <literal>/</literal> group.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--ostype=<replaceable>ostype</replaceable></option></term>
        <listitem><para>
            Specifies the guest OS to run in the VM. Run the
            <command>VBoxManage list ostypes</command> command to see
            the available OS types.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--register</option></term>
        <listitem><para>
            Registers the VM with your &product-name; installation. By
            default, the <command>VBoxManage createvm</command> command
            creates only the XML configuration for the VM but does not
            register the VM. If you do not register the VM at creation,
            you can run the <command>VBoxManage registervm</command>
            command after you create the VM.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--uuid=<replaceable>uuid</replaceable></option></term>
        <listitem><para>
            Specifies the Universally Unique Identifier (UUID) of the
            VM. Ensure that this UUID is unique within the
            &product-name; namespace of the host or of its VM group
            memberships if you decide to register the VM. By default,
            &product-name; provides the UUID.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--cipher=<replaceable>cipher</replaceable></option></term>
        <listitem><para>
            Specifies the cipher to use for encryption. Valid values are
            <literal>AES-128</literal> or
            <literal>AES-256</literal>.
          </para><para>
            This option enables you to set up encryption on VM.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--password-id=<replaceable>password-id</replaceable></option></term>
        <listitem><para>
            Specifies a new password identifier that is used for correct
            identification when supplying multiple passwords for the VM.
          </para><para>
            This option enables you to set up encryption on VM.
          </para></listitem>
      </varlistentry>
      <varlistentry>
        <term><option>--password=<replaceable>file</replaceable></option></term>
        <listitem><para>
            Use the <option>--password</option> to supply the encryption
            password of the VM. Either specify the absolute pathname of a
            password file on the host operating system, or <literal>-</literal>
            to prompt you for the password on the command line.
          </para><para>
            This option enables you to set up encryption on VM.
          </para></listitem>
      </varlistentry>
    </variablelist>
  </refsect1>

  <refsect1 id="vboxmanage-createvm-examples">
    <title>Examples</title>
    <remark role="help-scope" condition="GLOBAL" />
    <para>
      The following command creates a VM called <literal>vm2</literal>
      where you plan to run a 64-bit version of Oracle Linux.
    </para>
<screen>$ VBoxManage createvm --name "vm2" --ostype "Oracle_64"</screen>
    <para>
      The following command creates and registers a VM called
      <literal>vm3</literal>.
    </para>
<screen>$ VBoxManage createvm --name "vm3" --register</screen>
  </refsect1>

  <refsect1 id="vboxmanage-createvm-see-also">
    <title>See Also</title>
    <para>
      <xref linkend="vboxmanage-list" />,
      <xref linkend="vboxmanage-registervm" />
    </para>
  </refsect1>
</refentry>