VirtualBox

source: vbox/trunk/doc/manual/en_US/man_VBoxManage-dhcpserver.xml@ 79776

Last change on this file since 79776 was 79776, checked in by vboxsync, 6 years ago

VBoxManage: Brought the dhcpserver man page up to speed. bugref:9288

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 26.6 KB
Line 
1<?xml version="1.0" encoding="UTF-8"?>
2<!--
3 manpage, user manual, usage: VBoxManage dhcpserver
4
5 Copyright (C) 2006-2015 Oracle Corporation
6
7 This file is part of VirtualBox Open Source Edition (OSE), as
8 available from http://www.virtualbox.org. This file is free software;
9 you can redistribute it and/or modify it under the terms of the GNU
10 General Public License (GPL) as published by the Free Software
11 Foundation, in version 2 as it comes in the "COPYING" file of the
12 VirtualBox OSE distribution. VirtualBox OSE is distributed in the
13 hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
14 -->
15<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN" "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd">
16<refentry id="vboxmanage-dhcpserver" lang="en">
17
18 <refentryinfo>
19 <pubdate>$Date: 2019-07-15 00:27:54 +0000 (Mon, 15 Jul 2019) $</pubdate>
20 <title>VBoxManage dhcpserver</title>
21 </refentryinfo>
22
23 <refmeta>
24 <refentrytitle>VBoxManage-dhcpserver</refentrytitle>
25 <manvolnum>1</manvolnum>
26 </refmeta>
27
28 <refnamediv>
29 <refname>VBoxManage-dhcpserver</refname>
30 <refpurpose>DHCP server management</refpurpose>
31 <refclass>Oracle VM VirtualBox</refclass>
32 </refnamediv>
33
34 <refsynopsisdiv>
35 <cmdsynopsis id="synopsis-vboxmanage-dhcpserver-add">
36 <command>VBoxManage dhcpserver add</command>
37 <group choice="req">
38 <arg choice="plain">--network=<replaceable>netname</replaceable></arg>
39 <arg choice="plain">--interface=<replaceable>ifname</replaceable></arg>
40 </group>
41 <arg choice="req">--server-ip=<replaceable>address</replaceable></arg>
42 <arg choice="req">--netmask=<replaceable>mask</replaceable></arg>
43 <arg choice="req">--lower-ip=<replaceable>address</replaceable></arg>
44 <arg choice="req">--upper-ip=<replaceable>address</replaceable></arg>
45 <group choice="req">
46 <arg choice="plain">--enable</arg>
47 <arg choice="plain">--disable</arg>
48 </group>
49 <sbr/>
50 <arg choice="opt" rep="repeat">
51 <arg choice="opt">--global</arg>
52 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
53 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
54 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
55 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
56 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
57 </arg>
58 <sbr/>
59 <arg choice="opt" rep="repeat">
60 <arg choice="req">--group=<replaceable>name</replaceable></arg>
61 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
62 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
63 <arg choice="opt" rep="repeat">--incl-mac=<replaceable>address</replaceable></arg>
64 <arg choice="opt" rep="repeat">--excl-mac=<replaceable>address</replaceable></arg>
65 <arg choice="opt" rep="repeat">--incl-mac-wild=<replaceable>pattern</replaceable></arg>
66 <arg choice="opt" rep="repeat">--excl-mac-wild=<replaceable>pattern</replaceable></arg>
67 <arg choice="opt" rep="repeat">--incl-vendor=<replaceable>string</replaceable></arg>
68 <arg choice="opt" rep="repeat">--excl-vendor=<replaceable>string</replaceable></arg>
69 <arg choice="opt" rep="repeat">--incl-vendor-wild=<replaceable>pattern</replaceable></arg>
70 <arg choice="opt" rep="repeat">--excl-vendor-wild=<replaceable>pattern</replaceable></arg>
71 <arg choice="opt" rep="repeat">--incl-user=<replaceable>string</replaceable></arg>
72 <arg choice="opt" rep="repeat">--excl-user=<replaceable>string</replaceable></arg>
73 <arg choice="opt" rep="repeat">--incl-user-wild=<replaceable>pattern</replaceable></arg>
74 <arg choice="opt" rep="repeat">--excl-user-wild=<replaceable>pattern</replaceable></arg>
75 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
76 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
77 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
78 </arg>
79 <sbr/>
80 <arg choice="opt" rep="repeat">
81 <arg choice="req">--vm=<replaceable>name|uuid</replaceable></arg>
82 <arg choice="opt">--nic=<replaceable>1-N</replaceable></arg>
83 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
84 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
85 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
86 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
87 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
88 <arg choice="opt">--fixed-address=<replaceable>address</replaceable></arg>
89 </arg>
90 <sbr/>
91 <arg choice="opt" rep="repeat">
92 <arg choice="req">--mac-address=<replaceable>address</replaceable></arg>
93 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
94 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
95 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
96 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
97 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
98 <arg choice="opt">--fixed-address=<replaceable>address</replaceable></arg>
99 </arg>
100 </cmdsynopsis>
101 <cmdsynopsis id="synopsis-vboxmanage-dhcpserver-modify">
102 <command>VBoxManage dhcpserver modify</command>
103 <group choice="req">
104 <arg choice="plain">--network=<replaceable>netname</replaceable></arg>
105 <arg choice="plain">--interface=<replaceable>ifname</replaceable></arg>
106 </group>
107 <arg choice="opt">--server-ip=<replaceable>address</replaceable></arg>
108 <arg choice="opt">--lower-ip=<replaceable>address</replaceable></arg>
109 <arg choice="opt">--upper-ip=<replaceable>address</replaceable></arg>
110 <arg choice="opt">--netmask=<replaceable>mask</replaceable></arg>
111 <group choice="opt">
112 <arg choice="plain">--enable</arg>
113 <arg choice="plain">--disable</arg>
114 </group>
115 <sbr/>
116 <arg choice="opt" rep="repeat">
117 <arg choice="req">--group=<replaceable>name</replaceable></arg>
118 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
119 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
120 <arg choice="opt" rep="repeat">--del-mac=<replaceable>address</replaceable></arg>
121 <arg choice="opt" rep="repeat">--incl-mac=<replaceable>address</replaceable></arg>
122 <arg choice="opt" rep="repeat">--excl-mac=<replaceable>address</replaceable></arg>
123 <arg choice="opt" rep="repeat">--del-mac-wild=<replaceable>pattern</replaceable></arg>
124 <arg choice="opt" rep="repeat">--incl-mac-wild=<replaceable>pattern</replaceable></arg>
125 <arg choice="opt" rep="repeat">--excl-mac-wild=<replaceable>pattern</replaceable></arg>
126 <arg choice="opt" rep="repeat">--del-vendor=<replaceable>string</replaceable></arg>
127 <arg choice="opt" rep="repeat">--incl-vendor=<replaceable>string</replaceable></arg>
128 <arg choice="opt" rep="repeat">--excl-vendor=<replaceable>string</replaceable></arg>
129 <arg choice="opt" rep="repeat">--del-vendor-wild=<replaceable>pattern</replaceable></arg>
130 <arg choice="opt" rep="repeat">--incl-vendor-wild=<replaceable>pattern</replaceable></arg>
131 <arg choice="opt" rep="repeat">--excl-vendor-wild=<replaceable>pattern</replaceable></arg>
132 <arg choice="opt" rep="repeat">--del-user=<replaceable>string</replaceable></arg>
133 <arg choice="opt" rep="repeat">--incl-user=<replaceable>string</replaceable></arg>
134 <arg choice="opt" rep="repeat">--excl-user=<replaceable>string</replaceable></arg>
135 <arg choice="opt" rep="repeat">--del-user-wild=<replaceable>pattern</replaceable></arg>
136 <arg choice="opt" rep="repeat">--incl-user-wild=<replaceable>pattern</replaceable></arg>
137 <arg choice="opt" rep="repeat">--excl-user-wild=<replaceable>pattern</replaceable></arg>
138 <arg choice="opt">--zap-conditions</arg>
139 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
140 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
141 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
142 <arg choice="opt">--remove-config</arg>
143 </arg>
144 <sbr/>
145 <arg choice="opt" rep="repeat">
146 <arg choice="opt">--global</arg>
147 <arg choice="opt" rep="repeat">--del-opt=<replaceable>dhcp-opt-no</replaceable></arg>
148 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
149 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
150 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
151 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
152 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
153 <arg choice="opt">--remove-config</arg>
154 </arg>
155 <sbr/>
156 <arg choice="opt" rep="repeat">
157 <arg choice="req">--vm=<replaceable>name|uuid</replaceable></arg>
158 <arg choice="opt">--nic=<replaceable>1-N</replaceable></arg>
159 <arg choice="opt" rep="repeat">--del-opt=<replaceable>dhcp-opt-no</replaceable></arg>
160 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
161 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
162 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
163 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
164 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
165 <arg choice="opt">--fixed-address=<replaceable>address</replaceable></arg>
166 <arg choice="opt">--remove-config</arg>
167 </arg>
168 <sbr/>
169 <arg choice="opt" rep="repeat">
170 <arg choice="req">--mac-address=<replaceable>address</replaceable></arg>
171 <arg choice="opt" rep="repeat">--del-opt=<replaceable>dhcp-opt-no</replaceable></arg>
172 <arg choice="opt" rep="repeat">--set-opt=<replaceable>dhcp-opt-no value</replaceable></arg>
173 <arg choice="opt" rep="repeat">--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></arg>
174 <arg choice="opt">--min-lease-time=<replaceable>seconds</replaceable></arg>
175 <arg choice="opt">--default-lease-time=<replaceable>seconds</replaceable></arg>
176 <arg choice="opt">--max-lease-time=<replaceable>seconds</replaceable></arg>
177 <arg choice="opt">--fixed-address=<replaceable>address</replaceable></arg>
178 <arg choice="opt">--remove-config</arg>
179 </arg>
180 </cmdsynopsis>
181 <cmdsynopsis id="synopsis-vboxmanage-dhcpserver-remove">
182 <command>VBoxManage dhcpserver remove</command>
183 <group choice="req">
184 <arg choice="plain">--network=<replaceable>netname</replaceable></arg>
185 <arg choice="plain">--interface=<replaceable>ifname</replaceable></arg>
186 </group>
187 </cmdsynopsis>
188 <cmdsynopsis id="synopsis-vboxmanage-dhcpserver-restart">
189 <command>VBoxManage dhcpserver restart</command>
190 <group choice="req">
191 <arg choice="plain">--network=<replaceable>netname</replaceable></arg>
192 <arg choice="plain">--interface=<replaceable>ifname</replaceable></arg>
193 </group>
194 </cmdsynopsis>
195 <cmdsynopsis id="synopsis-vboxmanage-dhcpserver-findlease">
196 <command>VBoxManage dhcpserver findlease</command>
197 <group choice="req">
198 <arg choice="plain">--network=<replaceable>netname</replaceable></arg>
199 <arg choice="plain">--interface=<replaceable>ifname</replaceable></arg>
200 </group>
201 <arg choice="req">--mac-address=<replaceable>mac</replaceable></arg>
202 </cmdsynopsis>
203 </refsynopsisdiv>
204
205 <refsect1>
206 <title>Description</title>
207
208 <para>
209 The <command>dhcpserver</command> commands enable you to control the DHCP
210 server that is built into VirtualBox. You may find this useful when
211 using internal or host-only networking. Theoretically, you can also
212 enable it for a bridged network, but that may cause conflicts with other
213 DHCP servers in your physical network.
214 </para>
215
216 <refsect2 id="vboxmanage-dhcpserver-common-options">
217 <title>Common options</title>
218 <remark role="help-scope" condition="GLOBAL"/>
219 <para>The subcommands of <command>dhcpserver</command> all operate on an
220 internal network that can be identified via its name or in the host-only
221 case via the host-only interface name:</para>
222 <variablelist>
223 <varlistentry>
224 <term>--network=<replaceable>netname</replaceable></term>
225 <listitem><para>The internal network name. This is the same as you
226 would use as value to the <command>VBoxManage modifyvm --intnet</command>
227 option when configuring a VM for internal networking. Or you see as
228 VBoxNetworkName in the output from
229 <command>VBoxManage list intnets</command>,
230 <command>VBoxManage list natnets</command>, or
231 <command>VBoxManage list hostonlyifs</command>.
232 </para></listitem>
233 </varlistentry>
234 <varlistentry>
235 <term>--interface=<replaceable>ifname</replaceable></term>
236 <listitem><para>The host only interface name. This would be same value
237 as you would use for the <command>VBoxManage modifyvm --hostonlyadapter</command>
238 option when configuring a VM to use a host-only network. The value
239 can also be found in the Name row in <command>VBoxManage list hostonlyifs</command>.
240 </para></listitem>
241 </varlistentry>
242 </variablelist>
243 </refsect2>
244
245 <refsect2 id="vboxmanage-dhcpserver-add">
246 <title>dhcpserver add</title>
247 <remark role="help-copy-synopsis"/>
248 <para>
249 Adds a new DHCP server to a network or host-only interface.
250 </para>
251 <para>
252 Options configuring the DHCP server core:
253 </para>
254 <variablelist>
255 <varlistentry>
256 <term><option>--server-ip=<replaceable>address</replaceable></option></term>
257 <listitem><para>The IP address the DHCP server should use.</para></listitem>
258 </varlistentry>
259 <varlistentry>
260 <term><option>--lower-ip=<replaceable>address</replaceable></option>, <option>--upper-ip=<replaceable>address</replaceable></option></term>
261 <listitem><para>The IP address range for the DHCP server to manage. This
262 should not include the address of the DHCP server itself, but it must be
263 in the same network as it. The boundraries are inclusive, so both the
264 lower and upper addresses will be handed out to clients.</para></listitem>
265 </varlistentry>
266 <varlistentry>
267 <term><option>--netmask=<replaceable>mask</replaceable></option></term>
268 <listitem><para>The network mask. Typically 255.255.255.0.</para></listitem>
269 </varlistentry>
270 <varlistentry>
271 <term><option>--enable</option>, --disable</term>
272 <listitem><para>Whether to enable the DHCP server or disable it. If not specified,
273 the server will be created in disabled state and no IP addresses handed out.</para></listitem>
274 </varlistentry>
275 </variablelist>
276 <para>
277 Options selecting the scope:
278 </para>
279 <variablelist>
280 <varlistentry>
281 <term><option>--global</option></term>
282 <listitem><para>Set the configuration scope to global. Any subsequent
283 <option>--set-opt</option> options will be apply to all the DHCP clients.</para></listitem>
284 </varlistentry>
285 <varlistentry>
286 <term><option>--vm=<replaceable>vmname|uuid</replaceable></option></term>
287 <listitem><para>Set the configuration scope to the first NIC of the specified VM. Any
288 subsequent <option>--set-opt</option> options will apply just to that interface,
289 nothing else.</para></listitem>
290 </varlistentry>
291 <varlistentry>
292 <term><option>--nic=<replaceable>1-N</replaceable></option></term>
293 <listitem><para>Set the configuration scope to a NIC other than first of
294 the VM specified the in <option>--vm</option>.
295 </para></listitem>
296 </varlistentry>
297 <varlistentry>
298 <term><option>--mac-address=<replaceable>address</replaceable></option></term>
299 <listitem><para>Set the configuration scope to the specified MAC address.</para></listitem>
300 </varlistentry>
301 <varlistentry>
302 <term><option>--group=<replaceable>name</replaceable></option></term>
303 <listitem><para>Set the configuration scope to the specified group.</para></listitem>
304 </varlistentry>
305 </variablelist>
306 <para>
307 Options configuring the currently selected scope:
308 </para>
309 <variablelist>
310 <varlistentry>
311 <term><option>--set-opt=<replaceable>dhcp-opt-no value</replaceable></option></term>
312 <listitem><para>Adds the specified DHCP option number (0-255) and value. The
313 value format is option specific (typically human readable) and will be
314 validated by the API and the DHCP server.
315 </para></listitem>
316 </varlistentry>
317 <varlistentry>
318 <term><option>--set-opt-hex=<replaceable>dhcp-opt-no hexstring</replaceable></option></term>
319 <listitem><para>Adds the specified DHCP option number (0-255) and value. The option value
320 is specified as a raw series of hex bytes, optionally separated by colons. No validation
321 is performed on these by the API or the DHCP server, they will be pass as specified to the
322 client.
323 </para></listitem>
324 </varlistentry>
325 <varlistentry>
326 <term><option>--min-lease-time=<replaceable>seconds</replaceable></option></term>
327 <listitem><para>Sets the minimum lease time for the current scope in seconds.
328 Zero means taking the value from a higher option level or use default.
329 </para></listitem>
330 </varlistentry>
331 <varlistentry>
332 <term><option>--default-lease-time=<replaceable>seconds</replaceable></option></term>
333 <listitem><para>Sets the default lease time for the current scope in seconds.
334 Zero means taking the value from a higher option level or use default.
335 </para></listitem>
336 </varlistentry>
337 <varlistentry>
338 <term><option>--max-lease-time=<replaceable>seconds</replaceable></option></term>
339 <listitem><para>Sets the maximum lease time for the current scope in seconds.
340 Zero means taking the value from a higher option level or use default.
341 </para></listitem>
342 </varlistentry>
343 <varlistentry>
344 <term><option>--fixed-address=<replaceable>address</replaceable></option></term>
345 <listitem><para>Fixed address assignment for a <option>--vm</option> or
346 <option>--mac-address</option> configuration scope. Any empty
347 <replaceable>address</replaceable> turns it back to dynamic address assignment.
348 </para></listitem>
349 </varlistentry>
350 </variablelist>
351
352 <para>
353 Options configuring group membership conditions (excludes overrides includes):
354 </para>
355 <variablelist>
356 <varlistentry>
357 <term><option>--incl-mac=<replaceable>address</replaceable></option></term>
358 <listitem><para>Include the specific MAC address in the group.</para></listitem>
359 </varlistentry>
360 <varlistentry>
361 <term><option>--excl-mac=<replaceable>address</replaceable></option></term>
362 <listitem><para>Exclude the specific MAC address from the group.</para></listitem>
363 </varlistentry>
364 <varlistentry>
365 <term><option>--incl-mac-wild=<replaceable>pattern</replaceable></option></term>
366 <listitem><para>Include the specific MAC address pattern in the group.</para></listitem>
367 </varlistentry>
368 <varlistentry>
369 <term><option>--excl-mac-wild=<replaceable>pattern</replaceable></option></term>
370 <listitem><para>Exclude the specific MAC address pattern from the group.</para></listitem>
371 </varlistentry>
372 <varlistentry>
373 <term><option>--incl-vendor=<replaceable>string</replaceable></option></term>
374 <listitem><para>Include the specific vendor class ID in the group.</para></listitem>
375 </varlistentry>
376 <varlistentry>
377 <term><option>--excl-vendor=<replaceable>string</replaceable></option></term>
378 <listitem><para>Exclude the specific vendor class ID from the group.</para></listitem>
379 </varlistentry>
380 <varlistentry>
381 <term><option>--incl-vendor-wild=<replaceable>pattern</replaceable></option></term>
382 <listitem><para>Include the specific vendor class ID pattern in the group.</para></listitem>
383 </varlistentry>
384 <varlistentry>
385 <term><option>--excl-vendor-wild=<replaceable>pattern</replaceable></option></term>
386 <listitem><para>Exclude the specific vendor class ID pattern from the group.</para></listitem>
387 </varlistentry>
388 <varlistentry>
389 <term><option>--incl-user=<replaceable>string</replaceable></option></term>
390 <listitem><para>Include the specific user class ID in the group.</para></listitem>
391 </varlistentry>
392 <varlistentry>
393 <term><option>--excl-user=<replaceable>string</replaceable></option></term>
394 <listitem><para>Exclude the specific user class ID from the group.</para></listitem>
395 </varlistentry>
396 <varlistentry>
397 <term><option>--incl-user-wild=<replaceable>pattern</replaceable></option></term>
398 <listitem><para>Include the specific user class ID pattern in the group.</para></listitem>
399 </varlistentry>
400 <varlistentry>
401 <term><option>--excl-user-wild=<replaceable>pattern</replaceable></option></term>
402 <listitem><para>Exclude the specific user class ID pattern from the group.</para></listitem>
403 </varlistentry>
404 </variablelist>
405 </refsect2>
406
407 <refsect2 id="vboxmanage-dhcpserver-modify">
408 <title>dhcpserver modify</title>
409 <remark role="help-copy-synopsis"/>
410 <para>
411 This modifies an existing DHCP server configuration. It takes the same
412 options as the <command>add</command> command with the addition of the following
413 on scope configuration:
414 </para>
415 <variablelist>
416 <varlistentry>
417 <term><option>--del-opt=<replaceable>dhcp-opt-no</replaceable></option></term>
418 <listitem><para>Counterpart to <option>--set-opt</option> that will cause the specified
419 DHCP option number (0-255) to be deleted from the server settings. Like with
420 <option>--set-opt</option> the scope of the deletion is governed by the
421 <option>--global</option>, <option>--vm</option>, <option>--mac-address</option>
422 and <option>--group</option> options.
423 </para></listitem>
424 </varlistentry>
425 <varlistentry>
426 <term><option>--remove-config</option></term>
427 <listitem><para>Removes the configuration currently being scoped. The
428 <option>--global</option> scope is not removable. The configuration scope will
429 change to <option>--global</option> after this option.
430 </para></listitem>
431 </varlistentry>
432 </variablelist>
433 <para>
434 And the addition of these group membership condition options:
435 </para>
436 <variablelist>
437 <varlistentry>
438 <term><option>--del-mac=<replaceable>address</replaceable></option></term>
439 <listitem><para>Delete the specific MAC address from the group conditions.</para></listitem>
440 </varlistentry>
441 <varlistentry>
442 <term><option>--del-mac-wild=<replaceable>pattern</replaceable></option></term>
443 <listitem><para>Delete the specific MAC address pattern from the group conditions.</para></listitem>
444 </varlistentry>
445 <varlistentry>
446 <term><option>--del-vendor=<replaceable>string</replaceable></option></term>
447 <listitem><para>Delete the specific vendor class ID from the group conditions.</para></listitem>
448 </varlistentry>
449 <varlistentry>
450 <term><option>--del-vendor-wild=<replaceable>pattern</replaceable></option></term>
451 <listitem><para>Delete the specific vendor class ID pattern from the group conditions.</para></listitem>
452 </varlistentry>
453 <varlistentry>
454 <term><option>--del-user=<replaceable>string</replaceable></option></term>
455 <listitem><para>Delete the specific user class ID pattern from the group conditions.</para></listitem>
456 </varlistentry>
457 <varlistentry>
458 <term><option>--del-user-wild=<replaceable>pattern</replaceable></option></term>
459 <listitem><para>Delete the specific user class ID pattern from the group conditions.</para></listitem>
460 </varlistentry>
461 <varlistentry>
462 <term><option>--zap-conditions</option></term>
463 <listitem><para>Deletes all the group conditions.</para></listitem>
464 </varlistentry>
465 </variablelist>
466 </refsect2>
467
468 <refsect2 id="vboxmanage-dhcpserver-remove">
469 <title>dhcpserver remove</title>
470 <remark role="help-copy-synopsis"/>
471 <para>
472 Removes the specified DHCP server.
473 </para>
474 </refsect2>
475
476 <refsect2 id="vboxmanage-dhcpserver-restart">
477 <title>dhcpserver restart</title>
478 <remark role="help-copy-synopsis"/>
479 <para>
480 Restarts the specified DHCP server. The DHCP server must be running.
481 </para>
482 </refsect2>
483
484 <refsect2 id="vboxmanage-dhcpserver-findlease">
485 <title>dhcpserver findlease</title>
486 <remark role="help-copy-synopsis"/>
487 <para>
488 Performs a lease database lookup. This is mainly for getting the IP
489 address of a running VM.
490 </para>
491 <variablelist>
492 <varlistentry>
493 <term><option>--mac-address=<replaceable>mac</replaceable></option></term>
494 <listitem><para>The MAC address to lookup in the lease database.</para></listitem>
495 </varlistentry>
496 </variablelist>
497 </refsect2>
498
499 </refsect1>
500
501</refentry>
502
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette