source: vbox/trunk/doc/manual/en_US/man_VBoxManage-hostonlyif.xml@ 105149

<?xml version="1.0" encoding="UTF-8"?>
<!--
    manpage, user manual, usage: VBoxManage hostonlyif
-->
<!--
    Copyright (C) 2006-2023 Oracle and/or its affiliates.

    This file is part of VirtualBox base platform packages, as
    available from https://www.virtualbox.org.

    This program is free software; you can redistribute it and/or
    modify it under the terms of the GNU General Public License
    as published by the Free Software Foundation, in version 3 of the
    License.

    This program is distributed in the hope that it will be useful, but
    WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
    General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, see <https://www.gnu.org/licenses>.

    SPDX-License-Identifier: GPL-3.0-only
-->
<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
  "http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"[
<!ENTITY % all.entities SYSTEM "all-entities.ent">
%all.entities;
]>
<refentry id="vboxmanage-hostonlyif" lang="en">
  <refentryinfo>
    <pubdate>$Date: 2023-04-21 21:59:02 +0000 (Fri, 21 Apr 2023) $</pubdate>
    <title>VBoxManage hostonlyif</title>
  </refentryinfo>

  <refmeta>
    <refentrytitle>VBoxManage-hostonlyif</refentrytitle>
    <manvolnum>1</manvolnum>
  </refmeta>

  <refnamediv>
    <refname>VBoxManage-hostonlyif</refname>
    <refpurpose>manage host-only network interfaces</refpurpose>
    <refclass>&product-name;</refclass>
  </refnamediv>

  <refsynopsisdiv>
<!-- The 'id' is mandatory and must start with 'synopsis-'. -->
    <cmdsynopsis id="synopsis-vboxmanage-hostonlyif-ipconfig">
      <command>VBoxManage hostonlyif ipconfig</command>
      <arg choice="req"><replaceable>ifname</replaceable></arg>
      <group>
        <arg choice="plain">--dhcp</arg>
        <arg choice="plain">
          <arg choice="req">--ip=<replaceable>IPv4-address</replaceable></arg>
          <arg>--netmask=<replaceable>IPv4-netmask</replaceable></arg>
        </arg>
        <arg choice="plain">
          <arg choice="req">--ipv6=<replaceable>IPv6-address</replaceable></arg>
          <arg>--netmasklengthv6=<replaceable>length</replaceable></arg>
        </arg>
      </group>
    </cmdsynopsis>

    <cmdsynopsis id="synopsis-vboxmanage-hostonlyif-create">
      <command>VBoxManage hostonlyif create</command>
    </cmdsynopsis>

    <cmdsynopsis id="synopsis-vboxmanage-hostonlyif-remove">
      <command>VBoxManage hostonlyif remove</command>
      <arg choice="req"><replaceable>ifname</replaceable></arg>
    </cmdsynopsis>
  </refsynopsisdiv>

  <refsect1 id="vboxmanage-hostonlyif-description">
    <title>Description</title>
    <para>
      The <command>VBoxManage hostonlyif</command> command enables you
      to change the IP configuration of a host-only network interface.
      For a description of host-only networking, see
      <xref linkend="network_hostonly" />. Each host-only network
      interface is identified by a name and can either use the internal
      DHCP server or a manual IP configuration, both IPv4 and IPv6.
    </para>
    <refsect2 id="vboxmanage-hostonlyif-ipconfig">
      <title>Configure a Host-Only Interface</title>
      <remark role="help-copy-synopsis"/>
      <para>
        The <command>VBoxManage hostonlyif ipconfig</command> command
        configures a host-only interface.
      </para>
      <variablelist>
        <varlistentry>
          <term><replaceable>ifname</replaceable></term>
          <listitem><para>
              Specifies the name of the network interface. The name is
              of the form
              <literal>vboxnet</literal><replaceable>N</replaceable>
              where <replaceable>N</replaceable> is the interface
              instance.
            </para></listitem>
        </varlistentry>
        <varlistentry>
          <term><option>--dhcp</option></term>
          <listitem><para>
              Uses DHCP for the network interface.
            </para><para>
              You cannot use this option with the <option>--ip</option>,
              <option>--ipv6</option>, <option>--netmask</option>, and
              <option>--netmasklengthv6</option> options.
            </para></listitem>
        </varlistentry>
        <varlistentry>
          <term><option>--ip=<replaceable>IPv4-address</replaceable></option></term>
          <listitem><para>
              Specifies the IPv4 IP address for the network interface.
            </para><para>
              You cannot use this option with the
              <option>--dhcp</option>, <option>--ipv6</option>, and
              <option>--netmasklengthv6</option> options.
            </para></listitem>
        </varlistentry>
        <varlistentry>
          <term><option>--netmask=<replaceable>IPv4-netmask</replaceable></option></term>
          <listitem><para>
              Specifies the IPv4 netmask of the network interface. The
              default value is <literal>255.255.255.0</literal>.
            </para><para>
              You can use this option only with the
              <option>--ip</option> option.
            </para></listitem>
        </varlistentry>
        <varlistentry>
          <term><option>--ipv6=<replaceable>IPv6-address</replaceable></option></term>
          <listitem><para>
              Specifies the IPv6 IP address for the network interface.
            </para><para>
              You cannot use this option with the
              <option>--dhcp</option>, <option>--ip</option>, and
              <option>--netmask</option> options.
            </para></listitem>
        </varlistentry>
        <varlistentry>
          <term><option>--netmasklengthv6=<replaceable>length</replaceable></option></term>
          <listitem><para>
              Specifies the length of the IPv6 network interface. The
              default value is <literal>64</literal>.
            </para><para>
              You can use this option only with the
              <option>--ipv6</option> option.
            </para></listitem>
        </varlistentry>
      </variablelist>
    </refsect2>
    <refsect2 id="vboxmanage-hostonlyif-create">
      <title>Create a Network Interface on the Host System</title>
      <remark role="help-copy-synopsis"/>
      <para>
        The <command>VBoxManage hostonlyif create</command> command
        creates a new host-only network interface on the host operating
        system (OS). The network interface name is of the form
        <literal>vboxnet</literal><replaceable>N</replaceable> where
        <replaceable>N</replaceable> is the interface instance. You must
        run this command before you can attach virtual machines (VMs) to
        the host-only network.
      </para>
    </refsect2>
    <refsect2 id="vboxmanage-hostonlyif-remove">
      <title>Remove a Network Interface From the Host System</title>
      <remark role="help-copy-synopsis"/>
      <para>
        The <command>VBoxManage hostonlyif remove</command> command
        removes the specified host-only network interface from the host
        OS.
      </para>
      <variablelist>
        <varlistentry>
          <term><replaceable>ifname</replaceable></term>
          <listitem><para>
              Specifies the name of the network interface. The name is
              of the form
              <literal>vboxnet</literal><replaceable>N</replaceable>
              where <replaceable>N</replaceable> is the interface
              instance.
            </para></listitem>
        </varlistentry>
      </variablelist>
    </refsect2>
  </refsect1>

  <refsect1 id="vboxmanage-hostonlyif-examples">
    <title>Examples</title>
    <remark role="help-scope" condition="GLOBAL" />
    <para>
      The following command creates a new host-only network interface.
    </para>
<screen>$ VBoxManage hostonlyif create
0%...10%...20%...30%...40%...50%...60%...70%...80%...90%...100%
Interface 'vboxnet2' was successfully created</screen>
    <para>
      The following command configures the IPv4 address for the
      <literal>vboxnet2</literal> host-only network interface.
    </para>
<screen>$ VBoxManage hostonlyif ipconfig vboxnet2 --ip 10.0.2.18</screen>
  </refsect1>
</refentry>