source: vbox/trunk/doc/manual/en_US/user_Installation.xml@ 78144

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE chapter PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
"http://www.oasis-open.org/docbook/xml/4.5/docbookx.dtd"[
<!ENTITY % all.entities SYSTEM "all-entities.ent">
%all.entities;
]>
<chapter id="installation">

  <title>Installation Details</title>

  <para>
    As installation of &product-name; varies depending on your host
    operating system, the following sections provide installation
    instructions for Windows, Mac OS X, Linux, and Oracle Solaris.
  </para>

  <sect1 id="installation_windows">

    <title>Installing on Windows Hosts</title>

    <sect2 id="install-win-prereq">

      <title>Prerequisites</title>

      <para>
        For the various versions of Windows that are supported as host
        operating systems, please refer to
        <xref
      linkend="hostossupport" />.
      </para>

      <para>
        In addition, Windows Installer 1.1 or later must be present on
        your system. This should be the case if you have all recent
        Windows updates installed.
      </para>

    </sect2>

    <sect2 id="install-win-performing">

      <title>Performing the Installation</title>

      <para>
        The &product-name; installation can be started in either of the
        following ways:
      </para>

      <itemizedlist>

        <listitem>
          <para>
            By double-clicking on the executable file, which contains
            both 32-bit and 64-bit architectures.
          </para>
        </listitem>

        <listitem>
          <para>
            By entering the following command:
          </para>

<screen>VirtualBox-&lt;version&gt;-&lt;revision&gt;-Win.exe -extract</screen>

          <para>
            This will extract both installers into a temporary
            directory, along with .MSI files. Run the following command
            to to perform the installation:
          </para>

<screen>msiexec /i VirtualBox-&lt;version&gt;-&lt;revision&gt;-MultiArch_&lt;x86|amd64&gt;.msi</screen>
        </listitem>

      </itemizedlist>

      <para>
        Using either way displays the installation
        <emphasis role="bold">Welcome</emphasis> dialog and enables you
        to choose where to install &product-name;, and which components
        to install. In addition to the &product-name; application, the
        following components are available:
      </para>

      <itemizedlist>

        <listitem>
          <para>
            <emphasis role="bold">USB support.</emphasis> This package
            contains special drivers for your Windows host that
            &product-name; requires to fully support USB devices inside
            your virtual machines.
          </para>
        </listitem>

        <listitem>
          <para>
            <emphasis role="bold">Networking.</emphasis> This package
            contains extra networking drivers for your Windows host that
            &product-name; needs to support Bridged Networking. This
            enables your VM's virtual network cards to be accessed from
            other machines on your physical network.
          </para>
        </listitem>

        <listitem>
          <para>
            <emphasis role="bold">Python support.</emphasis> This
            package contains Python scripting support for the
            &product-name; API, see <xref linkend="VirtualBoxAPI" />.
            For this to work, an already working Windows Python
            installation on the system is required.
          </para>

          <para>
            See, for example:
            <ulink
              url="http://www.python.org/download/windows/">http://www.python.org/download/windows/</ulink>.
          </para>

          <note>
            <para>
              Python version at least 2.6 is required. Since
              &product-name; 5.1, Python 3 is also supported.
            </para>
          </note>
        </listitem>

      </itemizedlist>

      <para>
        Depending on your Windows configuration, you may see warnings
        about unsigned drivers, or similar. Click
        <emphasis role="bold">Continue</emphasis> for these warnings, as
        otherwise &product-name; might not function correctly after
        installation.
      </para>

      <para>
        The installer will create a &product-name; group in the Windows
        <emphasis role="bold">Start</emphasis> menu, which enables you
        to launch the application and access its documentation.
      </para>

      <para>
        With standard settings, &product-name; will be installed for all
        users on the local system. If this is not wanted, you must
        invoke the installer by first extracting as follows:
      </para>

<screen>VirtualBox.exe -extract</screen>

      <para>
        Then, run either of the following commands on the extracted .MSI
        files. This will install &product-name; only for the current
        user.
      </para>

<screen>VirtualBox.exe -msiparams ALLUSERS=2</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-MultiArch_&lt;x86|amd64&gt;.msi ALLUSERS=2</screen>

      <para>
        If you do not want to install all features of &product-name;,
        you can set the optional
        <computeroutput>ADDLOCAL</computeroutput> parameter to
        explicitly name the features to be installed. The following
        features are available:
      </para>

      <variablelist>

        <varlistentry>
          <term>
            VBoxApplication
          </term>

          <listitem>
            <para>
              Main binaries of &product-name;.
            </para>

            <note>
              <para>
                This feature must not be absent, since it contains the
                minimum set of files to have working &product-name;
                installation.
              </para>
            </note>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxUSB
          </term>

          <listitem>
            <para>
              USB support.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxNetwork
          </term>

          <listitem>
            <para>
              All networking support. This includes the VBoxNetworkFlt
              and VBoxNetworkAdp features.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxNetworkFlt
          </term>

          <listitem>
            <para>
              Bridged networking support.
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxNetworkAdp
          </term>

          <listitem>
            <para>
              Host-only networking support
            </para>
          </listitem>
        </varlistentry>

        <varlistentry>
          <term>
            VBoxPython
          </term>

          <listitem>
            <para>
              Python support
            </para>

            <note>
              <para>
                Python version at least 2.6 is required. Since
                &product-name; 5.1, Python 3 is also supported.
              </para>
            </note>
          </listitem>
        </varlistentry>

      </variablelist>

      <para>
        For example, to only install USB support along with the main
        binaries, run either of the following commands:
      </para>

<screen>VirtualBox.exe -msiparams ADDLOCAL=VBoxApplication,VBoxUSB</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-MultiArch_&lt;x86|amd64&gt;.msi ADDLOCAL=VBoxApplication,VBoxUSB</screen>

      <para>
        The user is able to choose between NDIS5 and NDIS6 host network
        filter drivers during the installation. This is done using a
        command line parameter,
        <computeroutput>NETWORKTYPE</computeroutput>. The NDIS6 driver
        is default for Windows Vista and later. For older Windows
        versions, the installer will automatically select the NDIS5
        driver and this cannot be changed. For Windows Vista and later
        the user can force an install of the legacy NDIS5 host network
        filter driver by using
        <computeroutput>NETWORKTYPE=NDIS5</computeroutput>. For example,
        to install the NDIS5 driver on Windows 7 use either of the
        following commands:
      </para>

<screen>VirtualBox.exe -msiparams NETWORKTYPE=NDIS5</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-MultiArch_&lt;x86|amd64&gt;.msi NETWORKTYPE=NDIS5</screen>

    </sect2>

    <sect2 id="install-win-uninstall">

      <title>Uninstallation</title>

      <para>
        As &product-name; uses the standard Microsoft Windows installer,
        &product-name; can be safely uninstalled at any time. Click the
        program entry in the <emphasis role="bold">Add/Remove
        Programs</emphasis> list in the Windows Control Panel.
      </para>

    </sect2>

    <sect2 id="install-win-unattended">

      <title>Unattended Installation</title>

      <para>
        Unattended installations can be performed using the standard MSI
        support.
      </para>

    </sect2>

    <sect2 id="install-win-public-props">

      <title>Public Properties</title>

      <para>
        Public properties can be specified with the MSI API, to control
        additional behavior and features of the Windows host installer.
        Use either of the following commands:
      </para>

<screen>VirtualBox.exe -msiparams NAME=VALUE [...]</screen>

<screen>msiexec /i VirtualBox-&lt;version&gt;-MultiArch_&lt;x86|amd64&gt;.msi NAME=VALUE [...]</screen>

      <para>
        The following public properties are available.
      </para>

      <itemizedlist>

        <listitem>
          <para>
            VBOX_INSTALLDESKTOPSHORTCUT
          </para>

          <para>
            Specifies whether or not an &product-name; icon on the
            desktop should be created.
          </para>

          <para>
            Set to <computeroutput>1</computeroutput> to enable,
            <computeroutput>0</computeroutput> to disable. Default is 1.
          </para>
        </listitem>

        <listitem>
          <para>
            VBOX_INSTALLQUICKLAUNCHSHORTCUT
          </para>

          <para>
            Specifies whether or not an &product-name; icon in the Quick
            Launch Bar should be created.
          </para>

          <para>
            Set to <computeroutput>1</computeroutput> to enable,
            <computeroutput>0</computeroutput> to disable. Default is 1.
          </para>
        </listitem>

        <listitem>
          <para>
            VBOX_REGISTERFILEEXTENSIONS
          </para>

          <para>
            Specifies whether or not the file extensions .vbox,
            .vbox-extpack, .ovf, .ova, .vdi, .vmdk, .vhd and .vdd should
            be associated with &product-name;. Files of these types then
            will be opened with &product-name;.
          </para>

          <para>
            Set to <computeroutput>1</computeroutput> to enable,
            <computeroutput>0</computeroutput> to disable. Default is 1.
          </para>
        </listitem>

        <listitem>
          <para>
            VBOX_START
          </para>

          <para>
            Specifies whether to start &product-name; right after
            successful installation.
          </para>

          <para>
            Set to <computeroutput>1</computeroutput> to enable,
            <computeroutput>0</computeroutput> to disable. Default is 1.
          </para>
        </listitem>

      </itemizedlist>

    </sect2>

  </sect1>

  <sect1 id="installation-mac">

    <title>Installing on Mac OS X Hosts</title>

    <sect2 id="install-mac-performing">

      <title>Performing the Installation</title>

      <para>
        For Mac OS X hosts, &product-name; ships in a
        <computeroutput>dmg</computeroutput> disk image file. Perform
        the following steps to install on a Mac OS X host:
      </para>

      <orderedlist>

        <listitem>
          <para>
            Double-click on the <computeroutput>dmg</computeroutput>
            file, to mount the contents.
          </para>
        </listitem>

        <listitem>
          <para>
            A window opens, prompting you to double-click on the
            <computeroutput>VirtualBox.pkg</computeroutput> installer
            file displayed in that window.
          </para>
        </listitem>

        <listitem>
          <para>
            This will start the installer, which enables you to select
            where to install &product-name;.
          </para>
        </listitem>

      </orderedlist>

      <para>
        After installation, you can find an &product-name; icon in the
        "Applications" folder in the Finder.
      </para>

    </sect2>

    <sect2 id="install-mac-uninstall">

      <title>Uninstallation</title>

      <para>
        To uninstall &product-name;, open the disk image
        <computeroutput>dmg</computeroutput> file and double-click on
        the uninstall icon shown.
      </para>

    </sect2>

    <sect2 id="install-mac-unattended">

      <title>Unattended Installation</title>

      <para>
        To perform a non-interactive installation of &product-name; you
        can use the command line version of the installer application.
      </para>

      <para>
        Mount the <computeroutput>dmg</computeroutput> disk image file,
        as described in the installation procedure, or use the following
        command line:
      </para>

<screen>hdiutil attach /path/to/VirtualBox-xyz.dmg</screen>

      <para>
        Open a terminal session and run the following command:
      </para>

<screen>sudo installer -pkg /Volumes/VirtualBox/VirtualBox.pkg -target /Volumes/Macintosh\ HD</screen>

    </sect2>

  </sect1>

  <sect1 id="install-linux-host">

    <title>Installing on Linux Hosts</title>

    <sect2 id="install-linux-prereq">

      <title>Prerequisites</title>

      <para>
        For the various versions of Linux that are supported as host
        operating systems, see <xref
      linkend="hostossupport" />.
      </para>

      <para>
        You will need to install the following packages on your Linux
        system before starting the installation. Some systems will do
        this for you automatically when you install &product-name;.
      </para>

      <itemizedlist>

        <listitem>
          <para>
            Qt 5.3.2 or later. Qt 5.6.2 or later is recommended.
          </para>
        </listitem>

        <listitem>
          <para>
            SDL 1.2.7 or later. This graphics library is typically
            called <computeroutput>libsdl</computeroutput> or similar.
          </para>
        </listitem>

      </itemizedlist>

      <note>
        <para>
          These packages are only required if you want to run the
          &product-name; graphical user interfaces. In particular,
          <computeroutput>VirtualBox</computeroutput>, the graphical
          VirtualBox Manager, requires both Qt and SDL. If you only want
          to run <command>VBoxHeadless</command>, neither Qt nor SDL are
          required.
        </para>
      </note>

    </sect2>

    <sect2 id="externalkernelmodules">

      <title>The &product-name; Driver Modules</title>

      <para>
        In order to run other operating systems in virtual machines
        alongside your main operating system, &product-name; needs to
        integrate very tightly into the system. To do this it installs a
        driver module called <computeroutput>vboxdrv</computeroutput>
        which does a lot of that work into the system kernel, which is
        the part of the operating system which controls your processor
        and physical hardware. Without this kernel module, you can still
        use the VirtualBox Manager to configure virtual machines, but
        they will not start. It also installs network drivers called
        <computeroutput>vboxnetflt</computeroutput> and
        <computeroutput>vboxnetadp</computeroutput> which enable virtual
        machines to make more use of your computer's network
        capabilities and are needed for any virtual machine networking
        beyond the basic NAT mode.
      </para>

      <para>
        Since distributing driver modules separately from the kernel is
        not something which Linux supports well, the install process
        creates the modules on the system where they will be used. This
        usually means first installing software packages from the
        distribution which are needed for the build process. Normally,
        these will be the GNU compiler (GCC), GNU Make (make) and
        packages containing header files for your kernel, as well as
        making sure that all system updates are installed and that the
        system is running the most up-to-date kernel included in the
        distribution. <emphasis>The running kernel and the header files
        must be updated to matching versions</emphasis>. The following
        list includes some instructions for common distributions. For
        most of them you may want to start by finding the version name
        of your kernel, using the command <command>uname -r</command> in
        a terminal. The instructions assume that you have not changed
        too much from the original installation, particularly not
        installed a different kernel type. If you have, then you will
        need to determine yourself what to set up.
      </para>

      <itemizedlist>

        <listitem>
          <para>
            With Debian and Ubuntu-based distributions, you must install
            the correct version of the
            <computeroutput>linux-headers</computeroutput>, usually
            whichever of
            <computeroutput>linux-headers-generic</computeroutput>,
            <computeroutput>linux-headers-amd64</computeroutput>,
            <computeroutput>linux-headers-i686</computeroutput> or
            <computeroutput>linux-headers-i686-pae</computeroutput> best
            matches the kernel version name. Also, the
            <computeroutput>linux-kbuild</computeroutput> package if it
            exists. Basic Ubuntu releases should have the correct
            packages installed by default.
          </para>
        </listitem>

        <listitem>
          <para>
            On Fedora, Redhat, Oracle Linux and many other RPM-based
            systems, the kernel version sometimes has a code of letters
            or a word close to the end of the version name. For example
            "uek" for the Oracle Enterprise kernel or "default" or
            "desktop" for the standard SUSE kernels. In this case, the
            package name is
            <computeroutput>kernel-uek-devel</computeroutput> or
            equivalent. If there is no such code, it is usually
            <computeroutput>kernel-devel</computeroutput>.
          </para>
        </listitem>

        <listitem>
          <para>
            On older SUSE and openSUSE Linux, you must install the
            <computeroutput>kernel-source</computeroutput> and
            <computeroutput>kernel-syms</computeroutput> packages.
          </para>
        </listitem>

      </itemizedlist>

      <para>
        If you suspect that something has gone wrong with module
        installation, check that your system is set up as described
        above and try running the following command, as root:
      </para>

<screen>rcvboxdrv setup</screen>

    </sect2>

    <sect2 id="install-linux-performing">

      <title>Performing the Installation</title>

      <para>
        &product-name; is available in a number of package formats
        native to various common Linux distributions. See
        <xref linkend="hostossupport"/>. In addition, there is an
        alternative generic installer (.run) which should work on most
        Linux distributions. The generic installer packages are built on
        EL5 systems and thus require reasonably old versions of glibc,
        such as version 2.5, and other system libraries.
      </para>

      <sect3 id="install-linux-debian-ubuntu">

        <title>Installing &product-name; from a Debian/Ubuntu Package</title>

        <para>
          Download the appropriate package for your distribution. The
          following examples assume that you are installing to a 32-bit
          Ubuntu Wily system. Use <computeroutput>dpkg</computeroutput>
          to install the Debian package,as follows:
        </para>

<screen>sudo dpkg -i virtualbox-5.0_<replaceable>version-number</replaceable>_Ubuntu_wily_i386.deb</screen>

        <para>
          The installer will also try to build kernel modules suitable
          for the current running kernel. If the build process is not
          successful you will be shown a warning and the package will be
          left unconfigured. Look at
          <computeroutput>/var/log/vbox-install.log</computeroutput> to
          find out why the compilation failed. You may have to install
          the appropriate Linux kernel headers, see
          <xref
        linkend="externalkernelmodules" />. After
          correcting any problems, run the following command:
        </para>

<screen>sudo rcvboxdrv setup</screen>

        <para>
          This will start a second attempt to build the module.
        </para>

        <para>
          If a suitable kernel module was found in the package or the
          module was successfully built, the installation script will
          attempt to load that module. If this fails, please see
          <xref
        linkend="ts_linux-kernelmodule-fails-to-load" />
          for further information.
        </para>

        <para>
          Once &product-name; has been successfully installed and
          configured, you can start it by clicking
          <emphasis role="bold">VirtualBox</emphasis> in your
          <emphasis role="bold">Start</emphasis> menu or from the
          command line. See <xref linkend="startingvboxonlinux" />.
        </para>

      </sect3>

      <sect3 id="install-linux-alt-installer">

        <title>Using the Alternative Generic Installer (VirtualBox.run)</title>

        <para>
          The alternative generic installer performs the following
          steps:
        </para>

        <itemizedlist>

          <listitem>
            <para>
              Unpacks the application files to the target directory
              <computeroutput>/opt/VirtualBox/</computeroutput>, which
              cannot be changed.
            </para>
          </listitem>

          <listitem>
            <para>
              Builds and installs the &product-name; kernel modules:
              <computeroutput>vboxdrv</computeroutput>,
              <computeroutput>vboxnetflt</computeroutput>, and
              <computeroutput>vboxnetadp</computeroutput>.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates <computeroutput>/sbin/rcvboxdrv</computeroutput>,
              an init script to start the &product-name; kernel module.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates a new system group called
              <computeroutput>vboxusers</computeroutput>.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates symbolic links in
              <computeroutput>/usr/bin</computeroutput> to a shell
              script
              <computeroutput>/opt/VirtualBox/VBox</computeroutput>
              which does some sanity checks and dispatches to the actual
              executables: <command>VirtualBox</command>,
              <command>VBoxVRDP</command>,
              <command>VBoxHeadless</command> and
              <command>VBoxManage</command>.
            </para>
          </listitem>

          <listitem>
            <para>
              Creates
              <computeroutput>/etc/udev/rules.d/60-vboxdrv.rules</computeroutput>,
              a description file for udev, if that is present, which
              makes the USB devices accessible to all users in the
              <computeroutput>vboxusers</computeroutput> group.
            </para>
          </listitem>

          <listitem>
            <para>
              Writes the installation directory to
              <computeroutput>/etc/vbox/vbox.cfg</computeroutput>.
            </para>
          </listitem>

        </itemizedlist>

        <para>
          The installer must be executed as root with either
          <computeroutput>install</computeroutput> or
          <computeroutput>uninstall</computeroutput> as the first
          parameter. For example:
        </para>

<screen>sudo ./VirtualBox.run install</screen>

        <para>
          Or if you do not have the <command>sudo</command> command
          available, run the following as root instead:
        </para>

<screen>./VirtualBox.run install</screen>

        <para>
          Add every user who needs to access USB devices from a
          VirtualBox guests to the group
          <computeroutput>vboxusers</computeroutput>. Either use the GUI
          user management tools or run the following command as root:
        </para>

<screen>sudo usermod -a -G vboxusers username</screen>

        <note>
          <para>
            The <command>usermod</command> command of some older Linux
            distributions does not support the <option>-a</option>
            option, which adds the user to the given group without
            affecting membership of other groups. In this case, find out
            the current group memberships with the
            <command>groups</command> command and add all these groups
            in a comma-separated list to the command line after the
            <option>-G</option> option. For example:
            <computeroutput>usermod -G group1,group2,vboxusers
            username</computeroutput>.
          </para>
        </note>

      </sect3>

      <sect3 id="install-linux-manual">

        <title>Performing a Manual Installation</title>

        <para>
          If you cannot use the shell script installer described in
          <xref linkend="install-linux-alt-installer"/>, you can perform
          a manual installation. Run the installer as follows:
        </para>

<screen>./VirtualBox.run --keep --noexec</screen>

        <para>
          This will unpack all the files needed for installation in the
          directory <computeroutput>install</computeroutput> under the
          current directory. The &product-name; application files are
          contained in
          <computeroutput>VirtualBox.tar.bz2</computeroutput> which you
          can unpack to any directory on your system. For example:
        </para>

<screen>sudo mkdir /opt/VirtualBox
sudo tar jxf ./install/VirtualBox.tar.bz2 -C /opt/VirtualBox</screen>

        <para>
          To run the same example as root, use the following commands:
        </para>

<screen>mkdir /opt/VirtualBox
tar jxf ./install/VirtualBox.tar.bz2 -C /opt/VirtualBox</screen>

        <para>
          The sources for &product-name;'s kernel module are provided in
          the <computeroutput>src</computeroutput> directory. To build
          the module, change to the directory and use the following
          command:
        </para>

<screen>make</screen>

        <para>
          If everything builds correctly, run the following command to
          install the module to the appropriate module directory:
        </para>

<screen>sudo make install</screen>

        <para>
          In case you do not have sudo, switch the user account to root
          and run the following command:
        </para>

<screen>make install</screen>

        <para>
          The &product-name; kernel module needs a device node to
          operate. The above <command>make</command> command will tell
          you how to create the device node, depending on your Linux
          system. The procedure is slightly different for a classical
          Linux setup with a <computeroutput>/dev</computeroutput>
          directory, a system with the now deprecated
          <command>devfs</command> and a modern Linux system with
          <command>udev</command>.
        </para>

        <para>
          On certain Linux distributions, you might experience
          difficulties building the module. You will have to analyze the
          error messages from the build system to diagnose the cause of
          the problems. In general, make sure that the correct Linux
          kernel sources are used for the build process.
        </para>

        <para>
          Note that the <computeroutput>/dev/vboxdrv</computeroutput>
          kernel module device node must be owned by root:root and must
          be read/writable only for the user.
        </para>

        <para>
          Next, you install the system initialization script for the
          kernel module and activate the initialization script using the
          right method for your distribution, as follows:
        </para>

<screen>cp /opt/VirtualBox/vboxdrv.sh /sbin/rcvboxdrv</screen>

        <para>
          This example assumes you installed &product-name; to the
          <computeroutput>/opt/VirtualBox</computeroutput> directory.
        </para>

        <para>
          Create a configuration file for &product-name;, as follows:
        </para>

<screen>mkdir /etc/vbox
echo INSTALL_DIR=/opt/VirtualBox &gt; /etc/vbox/vbox.cfg</screen>

        <para>
          Create the following symbolic links:
        </para>

<screen>ln -sf /opt/VirtualBox/VBox.sh /usr/bin/VirtualBox
ln -sf /opt/VirtualBox/VBox.sh /usr/bin/VBoxManage
ln -sf /opt/VirtualBox/VBox.sh /usr/bin/VBoxHeadless</screen>

      </sect3>

      <sect3 id="install-linux-update-uninstall">

        <title>Updating and Uninstalling &product-name;</title>

        <para>
          Before updating or uninstalling &product-name;, you must
          terminate any virtual machines which are currently running and
          exit the &product-name; or VBoxSVC applications. To update
          &product-name;, simply run the installer of the updated
          version. To uninstall &product-name;, run the installer as
          follows:
        </para>

<screen>sudo ./VirtualBox.run uninstall</screen>

        <para>
          As root, you can use the following command:
        </para>

<screen>./VirtualBox.run uninstall</screen>

        <para>
          You can uninstall the .run package as follows:
        </para>

<screen>/opt/VirtualBox/uninstall.sh</screen>

        <para>
          To manually uninstall &product-name;, perform the manual
          installation steps in reverse order.
        </para>

      </sect3>

      <sect3 id="install-linux-debian-automatic">

        <title>Automatic Installation of Debian Packages</title>

        <para>
          The Debian packages will request some user feedback when
          installed for the first time. The debconf system is used to
          perform this task. To prevent any user interaction during
          installation, default values can be defined. A file
          <computeroutput>vboxconf</computeroutput> can contain the
          following debconf settings:
        </para>

<screen>virtualbox virtualbox/module-compilation-allowed boolean true
virtualbox virtualbox/delete-old-modules boolean true</screen>

        <para>
          The first line enables compilation of the vboxdrv kernel
          module if no module was found for the current kernel. The
          second line enables the package to delete any old vboxdrv
          kernel modules compiled by previous installations.
        </para>

        <para>
          These default settings can be applied prior to the
          installation of the &product-name; Debian package, as follows:
        </para>

<screen>debconf-set-selections vboxconf</screen>

        <para>
          In addition there are some common configuration options that
          can be set prior to the installation. See
          <xref
        linkend="linux_install_opts" />.
        </para>

      </sect3>

      <sect3 id="install-linux-rpm-automatic">

        <title>Automatic Installation of RPM Packages</title>

        <para>
          The RPM format does not provide a configuration system
          comparable to the debconf system. See
          <xref
        linkend="linux_install_opts" /> for how to set
          some common installation options provided by &product-name;.
        </para>

      </sect3>

      <sect3 id="linux_install_opts">

        <title>Automatic Installation Options</title>

        <para>
          To configure the installation process for .deb and .rpm
          packages, you can create a response file named
          <computeroutput>/etc/default/virtualbox</computeroutput>. The
          automatic generation of the udev rule can be prevented with
          the following setting:
        </para>

<screen>INSTALL_NO_UDEV=1</screen>

        <para>
          The creation of the group vboxusers can be prevented as
          follows:
        </para>

<screen>INSTALL_NO_GROUP=1</screen>

        <para>
          If the following line is specified, the package installer will
          not try to build the <computeroutput>vboxdrv</computeroutput>
          kernel module if no module fitting the current kernel was
          found.
        </para>

<screen>INSTALL_NO_VBOXDRV=1</screen>

      </sect3>

    </sect2>

    <sect2 id="install-linux-vboxusers">

      <title>The vboxusers Group</title>

      <para>
        The Linux installers create the system user group
        <computeroutput>vboxusers</computeroutput> during installation.
        Any system user who is going to use USB devices from
        &product-name; guests must be a member of that group. A user can
        be made a member of the group
        <computeroutput>vboxusers</computeroutput> through the GUI
        user/group management or using the following command:
      </para>

<screen>sudo usermod -a -G vboxusers username</screen>

    </sect2>

    <sect2 id="startingvboxonlinux">

      <title>Starting &product-name; on Linux</title>

      <para>
        The easiest way to start a &product-name; program is by running
        the program of your choice (<command>VirtualBox</command>,
        <command>VBoxManage</command>, or
        <command>VBoxHeadless</command>) from a terminal. These are
        symbolic links to <command>VBox.sh</command> that start the
        required program for you.
      </para>

      <para>
        The following detailed instructions should only be of interest
        if you wish to execute &product-name; without installing it
        first. You should start by compiling the
        <computeroutput>vboxdrv</computeroutput> kernel module and
        inserting it into the Linux kernel. &product-name; consists of a
        service daemon, <computeroutput>VBoxSVC</computeroutput>, and
        several application programs. The daemon is automatically
        started if necessary. All &product-name; applications will
        communicate with the daemon through UNIX local domain sockets.
        There can be multiple daemon instances under different user
        accounts and applications can only communicate with the daemon
        running under the user account as the application. The local
        domain socket resides in a subdirectory of your system's
        directory for temporary files called
        <computeroutput>.vbox-&lt;username&gt;-ipc</computeroutput>. In
        case of communication problems or server startup problems, you
        may try to remove this directory.
      </para>

      <para>
        All &product-name; applications (<command>VirtualBox</command>,
        <command>VBoxManage</command>, and
        <command>VBoxHeadless</command>) require the &product-name;
        directory to be in the library path, as follows:
      </para>

<screen>LD_LIBRARY_PATH=. ./VBoxManage showvminfo "Windows XP"</screen>

    </sect2>

  </sect1>

  <sect1 id="install-solaris-host">

    <title>Installing on Oracle Solaris Hosts</title>

    <para>
      For the specific versions of Oracle Solaris that are supported as
      host operating systems, see <xref
    linkend="hostossupport" />.
    </para>

    <para>
      If you have a previously installed instance of &product-name; on
      your Oracle Solaris host, please uninstall it first before
      installing a new instance. See
      <xref linkend="uninstall-solaris-host" /> for uninstall
      instructions.
    </para>

    <sect2 id="install-solaris-performing">

      <title>Performing the Installation</title>

      <para>
        &product-name; is available as a standard Oracle Solaris
        package. Download the &product-name; SunOS package which
        includes the 64-bit versions of &product-name;. <emphasis>The
        installation must be performed as root and from the global
        zone</emphasis> as the &product-name; installer loads kernel
        drivers which cannot be done from non-global zones. To verify
        which zone you are currently in, execute the
        <command>zonename</command> command. Execute the following
        commands:
      </para>

<screen>gunzip -cd VirtualBox-<replaceable>version-number</replaceable>-SunOS.tar.gz | tar xvf -</screen>

      <para>
        The &product-name; kernel package is no longer a separate
        package and has been integrated into the main package. Install
        the &product-name; package as follows:
      </para>

<screen>pkgadd -d VirtualBox-<replaceable>version-number</replaceable>-SunOS.pkg</screen>

      <para>
        The installer will then prompt you to enter the package you wish
        to install. Choose <emphasis role="bold">1</emphasis> or
        <emphasis role="bold">all</emphasis> and proceed. Next the
        installer will ask you if you want to allow the postinstall
        script to be executed. Choose <emphasis role="bold">y</emphasis>
        and proceed, as it is essential to execute this script which
        installs the &product-name; kernel module. Following this
        confirmation the installer will install &product-name; and
        execute the postinstall setup script.
      </para>

      <para>
        Once the postinstall script has been executed your installation
        is now complete. You may now safely delete the uncompressed
        package and <computeroutput>autoresponse</computeroutput> files
        from your system. &product-name; is installed in
        <computeroutput>/opt/VirtualBox</computeroutput>.
      </para>

      <note>
        <para>
          If you need to use &product-name; from non-global zones, see
          <xref linkend="solaris-zones" />.
        </para>
      </note>

    </sect2>

    <sect2 id="install-solaris-vboxuser">

      <title>The vboxuser Group</title>

      <para>
        The installer creates the system user group
        <computeroutput>vboxuser</computeroutput> during installation
        for Oracle Solaris hosts that support the USB features required
        by &product-name;. Any system user who is going to use USB
        devices from &product-name; guests must be a member of this
        group. A user can be made a member of this group through the GUI
        user/group management or at the command line by executing as
        root:
      </para>

<screen>usermod -G vboxuser username</screen>

      <para>
        Note that adding an active user to that group will require that
        user to log out and back in again. This should be done manually
        after successful installation of the package.
      </para>

    </sect2>

    <sect2 id="install-solaris-starting">

      <title>Starting &product-name; on Oracle Solaris</title>

      <para>
        The easiest way to start a &product-name; program is by running
        the program of your choice (<command>VirtualBox</command>,
        <command>VBoxManage</command>, or
        <command>VBoxHeadless</command>) from a terminal. These are
        symbolic links to <command>VBox.sh</command> that start the
        required program for you.
      </para>

      <para>
        Alternatively, you can directly invoke the required programs
        from <computeroutput>/opt/VirtualBox</computeroutput>. Using the
        links provided is easier as you do not have to enter the full
        path.
      </para>

      <para>
        You can configure some elements of the
        <command>VirtualBox</command> Qt GUI, such as fonts and colours,
        by running <command>VBoxQtconfig</command> from the terminal.
      </para>

    </sect2>

    <sect2 id="uninstall-solaris-host">

      <title>Uninstallation</title>

      <para>
        Uninstallation of &product-name; on Oracle Solaris requires root
        permissions. To perform the uninstallation, start a root
        terminal session and run the following command:
      </para>

<screen>pkgrm SUNWvbox</screen>

      <para>
        After confirmation, this will remove &product-name; from your
        system.
      </para>

      <para>
        If you are uninstalling &product-name; version 3.0 or lower, you
        need to remove the &product-name; kernel interface package, as
        follows:
      </para>

<screen>pkgrm SUNWvboxkern</screen>

    </sect2>

    <sect2 id="install-solaris-unattended">

      <title>Unattended Installation</title>

      <para>
        To perform a non-interactive installation of &product-name;
        there is a response file named
        <computeroutput>autoresponse</computeroutput>, that the
        installer will use for responses to inputs rather than ask them
        from you.
      </para>

      <para>
        Extract the tar.gz package as described in the normal
        installation instructions. Then open a root terminal session and
        run the following command:
      </para>

<screen>pkgadd -d VirtualBox-<replaceable>version-number</replaceable>-SunOS-x86 -n -a autoresponse SUNWvbox</screen>

      <para>
        To perform a non-interactive uninstallation, open a root
        terminal session and run the following command:
      </para>

<screen>pkgrm -n -a /opt/VirtualBox/autoresponse SUNWvbox</screen>

    </sect2>

    <sect2 id="solaris-zones">

      <title>Configuring a Zone for Running &product-name;</title>

      <para>
        Assuming that &product-name; has already been installed into
        your zone, you need to give the zone access to &product-name;'s
        device node. This is done by performing the following steps.
        Start a root terminal and run the following command:
      </para>

<screen>zonecfg -z vboxzone</screen>

      <para>
        Replace "vboxzone" with the name of the zone where you intend to
        run &product-name;.
      </para>

      <para>
        Use<computeroutput>zonecfg</computeroutput> to add the
        <computeroutput>device</computeroutput> resource and
        <computeroutput>match</computeroutput> properties to the zone,
        as follows:
      </para>

<screen>zonecfg:vboxzone&gt;add device
zonecfg:vboxzone:device&gt;set match=/dev/vboxdrv
zonecfg:vboxzone:device&gt;end
zonecfg:vboxzone&gt;add device
zonecfg:vboxzone:device&gt;set match=/dev/vboxdrvu
zonecfg:vboxzone:device&gt;end
zonecfg:vboxzone&gt;exit</screen>

      <para>
        If you are running &product-name; 2.2.0 or above on Oracle
        Solaris 11 or above, you may also add a device for
        <computeroutput>/dev/vboxusbmon</computeroutput>, similar to
        that shown above. This does not apply to Oracle Solaris 10
        hosts, due to lack of USB support.
      </para>

      <para>
        If you are not using sparse root zones, you will need to
        loopback mount <computeroutput>/opt/VirtualBox</computeroutput>
        from the global zone into the non-global zone at the same path.
        This is specified below using the
        <computeroutput>dir</computeroutput> attribute and the
        <computeroutput>special</computeroutput> attribute. For example:
      </para>

<screen>zonecfg:vboxzone&gt;add fs
zonecfg:vboxzone:device&gt;set dir=/opt/VirtualBox
zonecfg:vboxzone:device&gt;set special=/opt/VirtualBox
zonecfg:vboxzone:device&gt;set type=lofs
zonecfg:vboxzone:device&gt;end
zonecfg:vboxzone&gt;exit</screen>

      <para>
        Reboot the zone using <computeroutput>zoneadm</computeroutput>
        and you should be able to run &product-name; from within the
        configured zone.
      </para>

    </sect2>

  </sect1>

</chapter>