source: vbox/trunk/include/VBox/HostServices/VBoxClipboardSvc.h@ 95579

/** @file
 * Shared Clipboard - Common header for host service and guest clients.
 *
 * Protocol history notes (incomplete):
 *
 *  - VirtualBox 6.1.0 betas:  Started work on adding support for copying &
 *    pasting files and directories, refactoring the protocol in the process.
 *      - Adds guest/host feature flags.
 *      - Adds context IDs (via guest feature flags).
 *      - Borrowed the message handling from guest controls.
 *      - Adds a multitude of functions and messages for dealing with file & dir
 *        copying, most inte
 *
 *  - VirtualBox x.x.x: Missing a lot of gradual improvements here.
 *
 *  - VirtualBox 1.3.2 (r17182): Initial implementation, supporting text.
 */

/*
 * Copyright (C) 2006-2022 Oracle Corporation
 *
 * This file is part of VirtualBox Open Source Edition (OSE), as
 * available from http://www.virtualbox.org. This file is free software;
 * you can redistribute it and/or modify it under the terms of the GNU
 * General Public License (GPL) as published by the Free Software
 * Foundation, in version 2 as it comes in the "COPYING" file of the
 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
 *
 * The contents of this file may alternatively be used under the terms
 * of the Common Development and Distribution License Version 1.0
 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
 * VirtualBox OSE distribution, in which case the provisions of the
 * CDDL are applicable instead of those of the GPL.
 *
 * You may elect to license modified versions of this file under the
 * terms and conditions of either the GPL or the CDDL or both.
 */

#ifndef VBOX_INCLUDED_HostServices_VBoxClipboardSvc_h
#define VBOX_INCLUDED_HostServices_VBoxClipboardSvc_h
#ifndef RT_WITHOUT_PRAGMA_ONCE
# pragma once
#endif

#include <VBox/VMMDevCoreTypes.h>
#include <VBox/VBoxGuestCoreTypes.h>
#include <VBox/hgcmsvc.h>


/** @name VBOX_SHCL_MODE_XXX - The Shared Clipboard modes of operation.
 * @{
 */
/** Shared Clipboard is disabled completely. */
#define VBOX_SHCL_MODE_OFF           0
/** Only transfers from host to the guest are possible. */
#define VBOX_SHCL_MODE_HOST_TO_GUEST 1
/** Only transfers from guest to the host are possible. */
#define VBOX_SHCL_MODE_GUEST_TO_HOST 2
/** Bidirectional transfers between guest and host are possible. */
#define VBOX_SHCL_MODE_BIDIRECTIONAL 3
/** @}  */

/** @name VBOX_SHCL_TRANSFER_MODE_XXX - The Shared Clipboard file transfer mode (bit field).
 * @{
 */
/** Shared Clipboard file transfers are disabled. */
#define VBOX_SHCL_TRANSFER_MODE_DISABLED     UINT32_C(0)
/** Shared Clipboard file transfers are enabled. */
#define VBOX_SHCL_TRANSFER_MODE_ENABLED      RT_BIT(0)
/** Shared Clipboard file transfer mode valid mask. */
#define VBOX_SHCL_TRANSFER_MODE_VALID_MASK   UINT32_C(0x1)
/** @} */


/** @name VBOX_SHCL_HOST_FN_XXX - The service functions which are callable by host.
 * @note These are not sacred and can be modified at will as long as all host
 *       clients are updated accordingly (probably just Main).
 * @{
 */
/** Sets the current Shared Clipboard operation mode. */
#define VBOX_SHCL_HOST_FN_SET_MODE           1
/** Sets the current Shared Clipboard (file) transfers mode.
 *  Operates on the VBOX_SHCL_TRANSFERS_XXX defines.
 * @since   6.1  */
#define VBOX_SHCL_HOST_FN_SET_TRANSFER_MODE  2
/** Run headless on the host, i.e. do not touch the host clipboard. */
#define VBOX_SHCL_HOST_FN_SET_HEADLESS       3

/** Reports cancellation of the current operation to the guest.
 * @since   6.1 - still a todo  */
#define VBOX_SHCL_HOST_FN_CANCEL             4
/** Reports an error to the guest.
 * @since   6.1 - still a todo  */
#define VBOX_SHCL_HOST_FN_ERROR              5
/** @} */


/** @name VBOX_SHCL_HOST_MSG_XXX - The host messages for the guest.
 * @{
 */
/** Returned only when the HGCM client session is closed (by different thread).
 *
 * This can require no futher host interaction since the session has been
 * closed.
 *
 * @since 1.3.2
 */
#define VBOX_SHCL_HOST_MSG_QUIT                             1
/** Request data for a specific format from the guest.
 *
 * Two parameters, first the 32-bit message ID followed by a 32-bit format bit
 * (VBOX_SHCL_FMT_XXX).  The guest will respond by issuing a
 * VBOX_SHCL_GUEST_FN_DATA_WRITE.
 *
 * @note  The host may sometimes incorrectly set more than one format bit, in
 *        which case it's up to the guest to pick which to write back.
 * @since 1.3.2
 */
#define VBOX_SHCL_HOST_MSG_READ_DATA                        2
/** Reports available clipboard format on the host to the guest.
 *
 * Two parameters, first the 32-bit message ID followed by a 32-bit format mask
 * containing zero or more VBOX_SHCL_FMT_XXX flags.  The guest is not require to
 * respond to the host when receiving this message.
 *
 * @since 1.3.2
 */
#define VBOX_SHCL_HOST_MSG_FORMATS_REPORT                   3
/** Message PEEK or GET operation was canceled, try again.
 *
 * This is returned by VBOX_SHCL_GUEST_FN_MSG_PEEK_WAIT and
 * VBOX_SHCL_GUEST_FN_MSG_OLD_GET_WAIT in response to the guest calling
 * VBOX_SHCL_GUEST_FN_MSG_CANCEL.  The 2nd parameter is set to zero (be it
 * thought of as a parameter count or a format mask).
 *
 * @since   6.1.0
 */
#define VBOX_SHCL_HOST_MSG_CANCELED                         4

/** Request data for a specific format from the guest with context ID.
 *
 * This is send instead of the VBOX_SHCL_HOST_MSG_READ_DATA message to guest
 * that advertises VBOX_SHCL_GF_0_CONTEXT_ID.  The first parameter is a 64-bit
 * context ID which is to be used when issuing VBOX_SHCL_GUEST_F_DATA_WRITE, and
 * the second parameter is a 32-bit format bit (VBOX_SHCL_FMT_XXX).  The guest
 * will respond by issuing a VBOX_SHCL_GUEST_F_DATA_WRITE.
 *
 * @note  The host may sometimes incorrectly set more than one format bit, in
 *        which case it's up to the guest to pick which to write back.
 * @since 6.1.2
 */
#define VBOX_SHCL_HOST_MSG_READ_DATA_CID                    5

/** Sends a transfer status to the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_STATUS                   50
/** Reads the root list header from the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_ROOT_LIST_HDR_READ       51
/** Writes the root list header to the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_ROOT_LIST_HDR_WRITE      52
/** Reads a root list entry from the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_ROOT_LIST_ENTRY_READ     53
/** Writes a root list entry to the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_ROOT_LIST_ENTRY_WRITE    54
/** Open a transfer list on the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_LIST_OPEN                55
/** Closes a formerly opened transfer list on the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_LIST_CLOSE               56
/** Reads a list header from the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_LIST_HDR_READ            57
/** Writes a list header to the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_LIST_HDR_WRITE           58
/** Reads a list entry from the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_LIST_ENTRY_READ          59
/** Writes a list entry to the guest.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_LIST_ENTRY_WRITE         60
/** Open a transfer object on the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_OBJ_OPEN                 61
/** Closes a formerly opened transfer object on the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_OBJ_CLOSE                62
/** Reads from an object on the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_OBJ_READ                 63
/** Writes to an object on the guest side.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_OBJ_WRITE                64
/** Indicates that the host has canceled a transfer.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_CANCEL                   65
/** Indicates that the an unrecoverable error on the host occurred.
 * @since   6.1.?
 */
#define VBOX_SHCL_HOST_MSG_TRANSFER_ERROR                    66
/** @} */


/** @name VBOX_SHCL_GUEST_FN_XXX - The service functions which are called by guest.
 * @{
 */
/** Calls the host and waits (blocking) for an host event VBOX_SHCL_HOST_MSG_XXX.
 *
 * @deprecated Replaced by VBOX_SHCL_GUEST_FN_MSG_PEEK_WAIT,
 *             VBOX_SHCL_GUEST_FN_MSG_GET, VBOX_SHCL_GUEST_FN_MSG_CANCEL.
 * @since   1.3.2
 */
#define VBOX_SHCL_GUEST_FN_MSG_OLD_GET_WAIT         1
/** Sends a list of available formats to the host.
 *
 * This function takes a single parameter, a 32-bit set of formats
 * (VBOX_SHCL_FMT_XXX), this can be zero if the clipboard is empty or previously
 * reported formats are no longer avaible (logout, shutdown, whatever).
 *
 * There was a period during 6.1 development where it would take three
 * parameters, a 64-bit context ID preceeded the formats and a 32-bit MBZ flags
 * parameter was appended.  This is still accepted, though deprecated.
 *
 * @returns May return informational statuses indicating partial success, just
 *          ignore it.
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @retval  VERR_NOT_SUPPORTED if all the formats are unsupported, host
 *          clipboard will be empty.
 * @since   1.3.2
 */
#define VBOX_SHCL_GUEST_FN_REPORT_FORMATS           2
/** Reads data in specified format from the host.
 *
 * This function takes three parameters, a 32-bit format bit
 * (VBOX_SHCL_FMT_XXX), a buffer and 32-bit number of bytes read (output).
 *
 * There was a period during 6.1 development where it would take five parameters
 * when VBOX_SHCL_GF_0_CONTEXT_ID was reported by the guest.  A 64-bit context
 * ID (ignored as purpose undefined), a 32-bit unused flag (MBZ), then the
 * 32-bit format bits, number of bytes read (output), and the buffer.  This
 * format is still accepted.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VINF_BUFFER_OVERLFLOW (VBox >= 6.1 only) if not enough buffer space
 *          has been given to retrieve the actual data, no data actually copied.
 *          The call then must be repeated with a buffer size returned from the
 *          host in cbData.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   1.3.2
 */
#define VBOX_SHCL_GUEST_FN_DATA_READ                3
/** Writes requested data to the host.
 *
 * This function takes either 2 or 3 parameters.  The last two parameters are a
 * 32-bit format bit (VBOX_SHCL_FMT_XXX) and a data buffer holding the related
 * data.  The three parameter variant have a context ID first, which shall be a
 * copy of the ID in the data request message.
 *
 * There was a period during 6.1 development where there would be a 5 parameter
 * version of this, inserting an unused flags parameter between the context ID
 * and the format bit, as well as a 32-bit data buffer size repate between the
 * format bit and the data buffer.  This format is still accepted, though
 * deprecated.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @retval  VERR_INVALID_CONTEXT if the context ID didn't match up.
 * @since   1.3.2
 */
#define VBOX_SHCL_GUEST_FN_DATA_WRITE               4

/** This is a left-over from the 6.1 dev cycle and will always fail.
 *
 * It used to take three 32-bit parameters, only one of which was actually used.
 *
 * It was replaced by VBOX_SHCL_GUEST_FN_REPORT_FEATURES and
 * VBOX_SHCL_GUEST_FN_NEGOTIATE_CHUNK_SIZE.
 *
 * @retval  VERR_NOT_IMPLEMENTED
 * @since   6.1
 */
#define VBOX_SHCL_GUEST_FN_CONNECT                  5
/** Report guest side feature flags and retrieve the host ones.
 *
 * Two 64-bit parameters are passed in from the guest with the guest features
 * (VBOX_SHCL_GF_XXX), the host replies by replacing the parameter values with
 * the host ones (VBOX_SHCL_HF_XXX).
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.0
 */
#define VBOX_SHCL_GUEST_FN_REPORT_FEATURES          6
/** Query the host ones feature masks.
 *
 * That way the guest (client) can get hold of the features from the host.
 * Again, it is prudent to set the 127 bit and observe it being cleared on
 * success, as older hosts might return success without doing anything.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.0
 */
#define VBOX_SHCL_GUEST_FN_QUERY_FEATURES           7
/** Peeks at the next message, returning immediately.
 *
 * Returns two 32-bit parameters, first is the message ID and the second the
 * parameter count.  May optionally return additional 32-bit parameters with the
 * sizes of respective message parameters.  To distinguish buffer sizes from
 * integer parameters, the latter gets their sizes inverted (uint32_t is ~4U,
 * uint64_t is ~8U).
 *
 * Does also support the VM restore checking as in VBOX_SHCL_GUEST_FN_MSG_PEEK_WAIT
 * (64-bit param \# 0), see documentation there.
 *
 * @retval  VINF_SUCCESS if a message was pending and is being returned.
 * @retval  VERR_TRY_AGAIN if no message pending.
 * @retval  VERR_VM_RESTORED if first parameter is a non-zero 64-bit value that
 *          does not match VbglR3GetSessionId() any more.  The new value is
 *          returned.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.0
 */
#define VBOX_SHCL_GUEST_FN_MSG_PEEK_NOWAIT          8
/** Peeks at the next message, waiting for one to arrive.
 *
 * Returns two 32-bit parameters, first is the message ID and the second the
 * parameter count.  May optionally return additional 32-bit parameters with the
 * sizes of respective message parameters.  To distinguish buffer sizes from
 * integer parameters, the latter gets their sizes inverted (uint32_t is ~4U,
 * uint64_t is ~8U).
 *
 * To facilitate VM restore checking, the first parameter can be a 64-bit
 * integer holding the VbglR3GetSessionId() value the guest knowns.  The
 * function will then check this before going to sleep and return
 * VERR_VM_RESTORED if it doesn't match, same thing happens when the VM is
 * restored.
 *
 * @retval  VINF_SUCCESS if info about an pending message is being returned.
 * @retval  VINF_TRY_AGAIN and message set to VBOX_SHCL_HOST_MSG_CANCELED if
 *          cancelled by VBOX_SHCL_GUEST_FN_MSG_CANCEL.
 * @retval  VERR_RESOURCE_BUSY if another thread already made a waiting call.
 * @retval  VERR_VM_RESTORED if first parameter is a non-zero 64-bit value that
 *          does not match VbglR3GetSessionId() any more.  The new value is
 *          returned.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @note    This replaces VBOX_SHCL_GUEST_FN_MSG_OLD_GET_WAIT.
 * @since   6.1.0
 */
#define VBOX_SHCL_GUEST_FN_MSG_PEEK_WAIT            9
/** Gets the next message, returning immediately.
 *
 * All parameters are specific to the message being retrieved, however if the
 * first one is an integer value it shall be an input parameter holding the
 * ID of the message being retrieved.  While it would be nice to add a separate
 * parameter for this purpose, this is done so because the code was liften from
 * Guest Controls which had backwards compatibilities to consider and we just
 * kept it like that.
 *
 * @retval  VINF_SUCCESS if message retrieved and removed from the pending queue.
 * @retval  VERR_TRY_AGAIN if no message pending.
 * @retval  VERR_MISMATCH if the incoming message ID does not match the pending.
 * @retval  VERR_BUFFER_OVERFLOW if a parmeter buffer is too small.  The buffer
 *          size was updated to reflect the required size.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @note    This replaces VBOX_SHCL_GUEST_FN_MSG_OLD_GET_WAIT.
 * @since   6.1.0
 */
#define VBOX_SHCL_GUEST_FN_MSG_GET                  10
/** Cancels pending calls for this client session.
 *
 * This should be used if a VBOX_SHCL_GUEST_FN__MSG_PEEK_WAIT or
 * VBOX_SHCL_GUEST_FN_MSG_OLD_GET_WAIT call gets interrupted on the client end,
 * so as to prevent being rebuffed with VERR_RESOURCE_BUSY when restarting the
 * call.
 *
 * @retval  VINF_SUCCESS if cancelled any calls.
 * @retval  VWRN_NOT_FOUND if no callers.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @since   6.1.0
 */
#define VBOX_SHCL_GUEST_FN_MSG_CANCEL               26

/** Replies to a function from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_REPLY                  11
/** Gets the root list header from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_ROOT_LIST_HDR_READ     12
/** Sends the root list header to the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_ROOT_LIST_HDR_WRITE    13
/** Gets a root list root entry from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_ROOT_LIST_ENTRY_READ   14
/** Sends a root list root entry to the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_ROOT_LIST_ENTRY_WRITE  15
/** Opens / gets a list handle from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_LIST_OPEN              16
/** Closes a list handle from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_LIST_CLOSE             17
/** Reads a list header from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_LIST_HDR_READ          18
/** Writes a list header to the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_LIST_HDR_WRITE         19
/** Reads a list entry from the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_LIST_ENTRY_READ        20
/** Sends a list entry to the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_LIST_ENTRY_WRITE       21
/** Opens an object on the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_OBJ_OPEN               22
/** Closes an object on the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_OBJ_CLOSE              23
/** Reads from an object on the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_OBJ_READ               24
/** Writes to an object on the host.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1.x
 */
#define VBOX_SHCL_GUEST_FN_OBJ_WRITE              25
/** Reports an error to the host.
 *
 * @todo r=bird: Smells like GUEST_MSG_SKIP
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @since   6.1
 */
#define VBOX_SHCL_GUEST_FN_ERROR                  27

/** For negotiating a chunk size between the guest and host.
 *
 * Takes two 32-bit parameters both being byte counts, the first one gives the
 * maximum chunk size the guest can handle and the second the preferred choice
 * of the guest.  Upon return, the host will have updated both of them to
 * reflect the maximum and default chunk sizes this client connect.  The guest
 * may set the 2nd value to zero and let the host choose.
 *
 * @retval  VINF_SUCCESS on success.
 * @retval  VERR_INVALID_CLIENT_ID
 * @retval  VERR_WRONG_PARAMETER_COUNT
 * @retval  VERR_WRONG_PARAMETER_TYPE
 * @retval  VERR_INVALID_PARAMETER if the 2nd parameter is larger than the
 *          first one
 * @since   6.1
 */
#define VBOX_SHCL_GUEST_FN_NEGOTIATE_CHUNK_SIZE     28

/** The last function number (used for validation/sanity).   */
#define VBOX_SHCL_GUEST_FN_LAST                     VBOX_SHCL_GUEST_FN_NEGOTIATE_CHUNK_SIZE
/** @} */


/** Maximum chunk size for a single data transfer. */
#define VBOX_SHCL_MAX_CHUNK_SIZE                  VMMDEV_MAX_HGCM_DATA_SIZE - _4K
/** Default chunk size for a single data transfer. */
#define VBOX_SHCL_DEFAULT_CHUNK_SIZE              RT_MIN(_64K, VBOX_SHCL_MAX_CHUNK_SIZE);


/** @name VBOX_SHCL_GF_XXX - Guest features.
 * @sa VBOX_SHCL_GUEST_FN_REPORT_FEATURES
 * @{ */
/** No flags set. */
#define VBOX_SHCL_GF_NONE                         0
/** The guest can handle context IDs where applicable. */
#define VBOX_SHCL_GF_0_CONTEXT_ID                 RT_BIT_64(0)
/** The guest can copy & paste files and directories.
 * @since 6.x */
#define VBOX_SHCL_GF_0_TRANSFERS                  RT_BIT_64(1)
/** The guest supports a (guest OS-)native frontend for showing and handling file transfers.
 *  If not set, the host will show a modal progress dialog instead and transferring file to
 *  a guest-specific temporary location first.
 *  Currently only supported for Windows guests (integrated into Windows Explorer via IDataObject). */
#define VBOX_SHCL_GF_0_TRANSFERS_FRONTEND         RT_BIT_64(2)
/** Bit that must be set in the 2nd parameter, will be cleared if the host reponds
 * correctly (old hosts might not). */
#define VBOX_SHCL_GF_1_MUST_BE_ONE                RT_BIT_64(63)
/** @} */

/** @name VBOX_GUESTCTRL_HF_XXX - Host features.
 * @sa VBOX_SHCL_GUEST_FN_REPORT_FEATURES
 * @{ */
/** No flags set. */
#define VBOX_SHCL_HF_NONE                         0
/** The host can handle context IDs where applicable as well as the new
 *  message handling functions. */
#define VBOX_SHCL_HF_0_CONTEXT_ID                 RT_BIT_64(0)
/** The host can copy & paste files and directories.
 *  This includes messages like
 * @since 6.1.? */
#define VBOX_SHCL_HF_0_TRANSFERS                  RT_BIT_64(1)
/** @} */

/** @name Context ID related macros and limits
 * @{ */
/**
 * Creates a context ID out of a client ID, a transfer ID and an event ID (count).
 */
#define VBOX_SHCL_CONTEXTID_MAKE(a_idSession, a_idTransfer, a_idEvent) \
    (  ((uint64_t)((a_idSession)  & 0xffff) << 48) \
     | ((uint64_t)((a_idTransfer) & 0xffff) << 32) \
     | ((uint32_t) (a_idEvent)) \
    )
/** Creates a context ID out of a session ID. */
#define VBOX_SHCL_CONTEXTID_MAKE_SESSION(a_idSession)    VBOX_SHCL_CONTEXTID_MAKE(a_idSession, 0, 0)
/** Gets the session ID out of a context ID. */
#define VBOX_SHCL_CONTEXTID_GET_SESSION(a_idContext)     ( (uint16_t)(((a_idContext) >> 48) & UINT16_MAX) )
/** Gets the transfer ID out of a context ID. */
#define VBOX_SHCL_CONTEXTID_GET_TRANSFER(a_idContext)    ( (uint16_t)(((a_idContext) >> 32) & UINT16_MAX) )
/** Gets the transfer event out of a context ID. */
#define VBOX_SHCL_CONTEXTID_GET_EVENT(a_idContext)       ( (uint32_t)( (a_idContext)        & UINT32_MAX) )

/** Maximum number of concurrent Shared Clipboard client sessions a VM can have. */
#define VBOX_SHCL_MAX_SESSIONS                          (UINT16_MAX - 1)
/** Maximum number of concurrent Shared Clipboard transfers a single client can have. */
#define VBOX_SHCL_MAX_TRANSFERS                         (UINT16_MAX - 1)
/** Maximum number of events a single Shared Clipboard transfer can have. */
#define VBOX_SHCL_MAX_EVENTS                            (UINT32_MAX - 1)
/** @} */


/*
 * HGCM parameter structures.
 */
/** @todo r=bird: These structures are mostly pointless, as they're only
 *        ever used by the VbglR3 part.  The host service does not use these
 *        structures for decoding guest requests, instead it's all hardcoded. */
#pragma pack(1)
/**
 * Waits (blocking) for a new host message to arrive.
 * Deprecated; do not use anymore.
 * Kept for maintaining compatibility with older Guest Additions.
 */
typedef struct _VBoxShClGetHostMsgOld
{
    VBGLIOCHGCMCALL hdr;

    /** uint32_t, out: Host message type. */
    HGCMFunctionParameter msg;
    /** uint32_t, out: VBOX_SHCL_FMT_*, depends on the 'msg'.
     *  r=andy This actual can have *different* meanings, depending on the host message type. */
    HGCMFunctionParameter formats; /* OUT uint32_t */
} VBoxShClGetHostMsgOld;

#define VBOX_SHCL_CPARMS_GET_HOST_MSG_OLD 2

/** @name VBOX_SHCL_GUEST_FN_REPORT_FORMATS
 * @{  */
/** VBOX_SHCL_GUEST_FN_REPORT_FORMATS parameters. */
typedef struct VBoxShClParmReportFormats
{
    /** uint32_t, int:  Zero or more VBOX_SHCL_FMT_XXX bits. */
    HGCMFunctionParameter f32Formats;
} VBoxShClParmReportFormats;

#define VBOX_SHCL_CPARMS_REPORT_FORMATS     1   /**< The parameter count for VBOX_SHCL_GUEST_FN_REPORT_FORMATS. */
#define VBOX_SHCL_CPARMS_REPORT_FORMATS_61B 3   /**< The 6.1 dev cycle variant, see VBOX_SHCL_GUEST_FN_REPORT_FORMATS. */
/** @} */

/** @name VBOX_SHCL_GUEST_FN_DATA_READ
 * @{ */
/** VBOX_SHCL_GUEST_FN_DATA_READ parameters. */
typedef struct VBoxShClParmDataRead
{
    /** uint32_t, in:   Requested format (VBOX_SHCL_FMT_XXX). */
    HGCMFunctionParameter f32Format;
    /** ptr, out:       The data buffer to put the data in on success. */
    HGCMFunctionParameter pData;
    /** uint32_t, out:  Size of returned data, if larger than the buffer, then no
     * data was actually transferred and the guest must repeat the call.  */
    HGCMFunctionParameter cb32Needed;
} VBoxShClParmDataRead;

#define VBOX_SHCL_CPARMS_DATA_READ      3   /**< The parameter count for VBOX_SHCL_GUEST_FN_DATA_READ. */
#define VBOX_SHCL_CPARMS_DATA_READ_61B  5   /**< The 6.1 dev cycle variant, see VBOX_SHCL_GUEST_FN_DATA_READ. */
/** @}  */

/** @name
 * @{ */

/** VBOX_SHCL_GUEST_FN_DATA_WRITE parameters. */
typedef struct VBoxShClParmDataWrite
{
    /** uint64_t, in:   Context ID from VBOX_SHCL_HOST_MSG_READ_DATA. */
    HGCMFunctionParameter id64Context;
    /** uint32_t, in:   The data format (VBOX_SHCL_FMT_XXX). */
    HGCMFunctionParameter f32Format;
    /** ptr, in:        The data. */
    HGCMFunctionParameter pData;
} VBoxShClParmDataWrite;

/** Old VBOX_SHCL_GUEST_FN_DATA_WRITE parameters. */
typedef struct VBoxShClParmDataWriteOld
{
    /** uint32_t, in:   The data format (VBOX_SHCL_FMT_XXX). */
    HGCMFunctionParameter f32Format;
    /** ptr, in:        The data. */
    HGCMFunctionParameter pData;
} VBoxShClParmDataWriteOld;

#define VBOX_SHCL_CPARMS_DATA_WRITE     3   /**< The variant used when VBOX_SHCL_GF_0_CONTEXT_ID is reported. */
#define VBOX_SHCL_CPARMS_DATA_WRITE_OLD 2   /**< The variant used when VBOX_SHCL_GF_0_CONTEXT_ID isn't reported. */
#define VBOX_SHCL_CPARMS_DATA_WRITE_61B 5   /**< The 6.1 dev cycle variant, see VBOX_SHCL_GUEST_FN_DATA_WRITE.  */
/** @} */

/**
 * Reports a transfer status.
 */
typedef struct _VBoxShClTransferStatusMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, out: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, out: Direction of transfer; of type SHCLTRANSFERDIR_. */
    HGCMFunctionParameter enmDir;
    /** uint32_t, out: Status to report; of type SHCLTRANSFERSTATUS_. */
    HGCMFunctionParameter enmStatus;
    /** uint32_t, out: Result code to report. Optional. */
    HGCMFunctionParameter rc;
    /** uint32_t, out: Reporting flags. Currently unused and must be 0. */
    HGCMFunctionParameter fFlags;
} VBoxShClTransferStatusMsg;

#define VBOX_SHCL_CPARMS_TRANSFER_STATUS 5

/**
 * Asks the host for the next command to process, along
 * with the needed amount of parameters and an optional blocking
 * flag.
 *
 * Used by: VBOX_SHCL_GUEST_FN_GET_HOST_MSG
 *
 */
typedef struct _VBoxShClGetHostMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint32_t, out: Message ID. */
    HGCMFunctionParameter uMsg;
    /** uint32_t, out: Number of parameters the message needs. */
    HGCMFunctionParameter cParms;
    /** uint32_t, in: Whether or not to block (wait) for a  new message to arrive. */
    HGCMFunctionParameter fBlock;
} VBoxShClPeekMsg;

#define VBOX_SHCL_CPARMS_GET_HOST_MSG 3

/** No listing flags specified. */
#define VBOX_SHCL_LIST_FLAG_NONE          0
/** Only returns one entry per read. */
#define VBOX_SHCL_LIST_FLAG_RETURN_ONE    RT_BIT(0)
/** Restarts reading a list from the beginning. */
#define VBOX_SHCL_LIST_FLAG_RESTART       RT_BIT(1)

#define VBOX_SHCL_LISTHDR_FLAG_NONE       0

/** No additional information provided. */
#define VBOX_SHCL_INFO_FLAG_NONE          0
/** Get object information of type SHCLFSOBJINFO. */
#define VBOX_SHCL_INFO_FLAG_FSOBJINFO     RT_BIT(0)

/**
 * Status message for lists and objects.
 */
typedef struct _VBoxShClStatusMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, in: Transfer status of type SHCLTRANSFERSTATUS. */
    HGCMFunctionParameter uStatus;
    /** pointer, in: Optional payload of this status, based on the status type. */
    HGCMFunctionParameter pvPayload;
} VBoxShClStatusMsg;

#define VBOX_SHCL_CPARMS_STATUS 3

/** Invalid message type, do not use. */
#define VBOX_SHCL_REPLYMSGTYPE_INVALID           0
/** Replies a transfer status. */
#define VBOX_SHCL_REPLYMSGTYPE_TRANSFER_STATUS   1
/** Replies a list open status. */
#define VBOX_SHCL_REPLYMSGTYPE_LIST_OPEN         2
/** Replies a list close status. */
#define VBOX_SHCL_REPLYMSGTYPE_LIST_CLOSE        3
/** Replies an object open status. */
#define VBOX_SHCL_REPLYMSGTYPE_OBJ_OPEN          4
/** Replies an object close status. */
#define VBOX_SHCL_REPLYMSGTYPE_OBJ_CLOSE         5

/**
 * Generic reply message.
 */
typedef struct _VBoxShClReplyMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, out: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, out: Message type of type VBOX_SHCL_REPLYMSGTYPE_XXX. */
    HGCMFunctionParameter enmType;
    /** uint32_t, out: IPRT result of overall operation. */
    HGCMFunctionParameter rc;
    /** pointer, out: Optional payload of this reply, based on the message type. */
    HGCMFunctionParameter pvPayload;
    union
    {
        struct
        {
            HGCMFunctionParameter enmStatus;
        } TransferStatus;
        struct
        {
            HGCMFunctionParameter uHandle;
        } ListOpen;
        struct
        {
            HGCMFunctionParameter uHandle;
        } ObjOpen;
        struct
        {
            HGCMFunctionParameter uHandle;
        } ObjClose;
    } u;
} VBoxShClReplyMsg;

/** Minimum parameters (HGCM function parameters minus the union) a reply message must have. */
#define VBOX_SHCL_CPARMS_REPLY_MIN 4

/**
 * Structure for keeping root list message parameters.
 */
typedef struct _VBoxShClRootListParms
{
    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, in: Roots listing flags; unused at the moment. */
    HGCMFunctionParameter fRoots;
} VBoxShClRootListParms;

#define VBOX_SHCL_CPARMS_ROOT_LIST 2

/**
 * Requests to read the root list header.
 */
typedef struct _VBoxShClRootListReadReqMsg
{
    VBGLIOCHGCMCALL hdr;

    VBoxShClRootListParms ReqParms;
} VBoxShClRootListReadReqMsg;

#define VBOX_SHCL_CPARMS_ROOT_LIST_HDR_READ_REQ VBOX_SHCL_CPARMS_ROOT_LIST

/**
 * Reads / Writes a root list header.
 */
typedef struct _VBoxShClRootListHdrMsg
{
    VBGLIOCHGCMCALL hdr;

    VBoxShClRootListParms ReqParms;
    /** uint64_t, in/out: Number of total root list entries. */
    HGCMFunctionParameter cRoots;
} VBoxShClRootListHdrMsg;

#define VBOX_SHCL_CPARMS_ROOT_LIST_HDR_READ  VBOX_SHCL_CPARMS_ROOT_LIST + 1
#define VBOX_SHCL_CPARMS_ROOT_LIST_HDR_WRITE VBOX_SHCL_CPARMS_ROOT_LIST + 1

/**
 * Structure for keeping list entry message parameters.
 */
typedef struct _VBoxShClRootListEntryParms
{
    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, in: VBOX_SHCL_INFO_FLAG_XXX. */
    HGCMFunctionParameter fInfo;
    /** uint32_t, in: Index of root list entry to get (zero-based). */
    HGCMFunctionParameter uIndex;
} VBoxShClRootListEntryParms;

#define VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY 3

/**
 * Request to read a list root entry.
 */
typedef struct _VBoxShClRootListEntryReadReqMsg
{
    VBGLIOCHGCMCALL hdr;

    /** in: Request parameters. */
    VBoxShClRootListEntryParms Parms;
} VBoxShClRootListEntryReadReqMsg;

#define VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY_READ_REQ VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY

/**
 * Reads / Writes a root list entry.
 */
typedef struct _VBoxShClRootListEntryMsg
{
    VBGLIOCHGCMCALL hdr;

    /** in/out: Request parameters. */
    VBoxShClRootListEntryParms Parms;
    /** pointer, in/out: Entry name. */
    HGCMFunctionParameter      szName;
    /** uint32_t, out: Bytes to be used for information/How many bytes were used.  */
    HGCMFunctionParameter      cbInfo;
    /** pointer, in/out: Information to be set/get (SHCLFSOBJINFO only currently).
     *  Do not forget to set the SHCLFSOBJINFO::Attr::enmAdditional for Get operation as well.  */
    HGCMFunctionParameter      pvInfo;
} VBoxShClRootListEntryMsg;

#define VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY_READ  VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY + 3
#define VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY_WRITE VBOX_SHCL_CPARMS_ROOT_LIST_ENTRY + 3

/**
 * Opens a list.
 */
typedef struct _VBoxShClListOpenMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, in: Listing flags (see VBOX_SHCL_LIST_FLAG_XXX). */
    HGCMFunctionParameter fList;
    /** pointer, in: Filter string. */
    HGCMFunctionParameter pvFilter;
    /** pointer, in: Listing poth. If empty or NULL the listing's root path will be opened. */
    HGCMFunctionParameter pvPath;
    /** uint64_t, out: List handle. */
    HGCMFunctionParameter uHandle;
} VBoxShClListOpenMsg;

#define VBOX_SHCL_CPARMS_LIST_OPEN 5

/**
 * Closes a list.
 */
typedef struct _VBoxShClListCloseMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in/out: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, in: List handle. */
    HGCMFunctionParameter uHandle;
} VBoxShClListCloseMsg;

#define VBOX_SHCL_CPARMS_LIST_CLOSE 2

typedef struct _VBoxShClListHdrReqParms
{
    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, in: List handle. */
    HGCMFunctionParameter uHandle;
    /** uint32_t, in: Flags of type VBOX_SHCL_LISTHDR_FLAG_XXX. */
    HGCMFunctionParameter fFlags;
} VBoxShClListHdrReqParms;

#define VBOX_SHCL_CPARMS_LIST_HDR_REQ 3

/**
 * Request to read a list header.
 */
typedef struct _VBoxShClListHdrReadReqMsg
{
    VBGLIOCHGCMCALL hdr;

    VBoxShClListHdrReqParms ReqParms;
} VBoxShClListHdrReadReqMsg;

#define VBOX_SHCL_CPARMS_LIST_HDR_READ_REQ VBOX_SHCL_CPARMS_LIST_HDR_REQ

/**
 * Reads / Writes a list header.
 */
typedef struct _VBoxShClListHdrMsg
{
    VBGLIOCHGCMCALL hdr;

    VBoxShClListHdrReqParms ReqParms;
    /** uint32_t, in/out: Feature flags (see VBOX_SHCL_FEATURE_FLAG_XXX). */
    HGCMFunctionParameter   fFeatures;
    /** uint64_t, in/out: Number of total objects to transfer. */
    HGCMFunctionParameter   cTotalObjects;
    /** uint64_t, in/out: Number of total bytes to transfer. */
    HGCMFunctionParameter   cbTotalSize;
} VBoxShClListHdrMsg;

#define VBOX_SHCL_CPARMS_LIST_HDR VBOX_SHCL_CPARMS_LIST_HDR_REQ + 3

typedef struct _VBoxShClListEntryReqParms
{
    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, in: List handle. */
    HGCMFunctionParameter uHandle;
    /** uint32_t, in: VBOX_SHCL_INFO_FLAG_XXX. */
    HGCMFunctionParameter fInfo;
} VBoxShClListEntryReqParms;

#define VBOX_SHCL_CPARMS_LIST_ENTRY_REQ 3

/**
 * Request to read a list entry.
 */
typedef struct _VBoxShClListEntryReadReqMsg
{
    VBGLIOCHGCMCALL hdr;

    VBoxShClListEntryReqParms ReqParms;
} VBoxShClListEntryReadReqMsg;

#define VBOX_SHCL_CPARMS_LIST_ENTRY_READ VBOX_SHCL_CPARMS_LIST_ENTRY_REQ

/**
 * Reads / Writes a list entry.
 */
typedef struct _VBoxShClListEntryMsg
{
    VBGLIOCHGCMCALL hdr;

    /** in/out: Request parameters. */
    VBoxShClListEntryReqParms ReqParms;
    /** pointer, in/out: Entry name. */
    HGCMFunctionParameter     szName;
    /** uint32_t, out: Bytes to be used for information/How many bytes were used.  */
    HGCMFunctionParameter     cbInfo;
    /** pointer, in/out: Information to be set/get (SHCLFSOBJINFO only currently).
     *  Do not forget to set the SHCLFSOBJINFO::Attr::enmAdditional for Get operation as well.  */
    HGCMFunctionParameter     pvInfo;
} VBoxShClListEntryMsg;

#define VBOX_SHCL_CPARMS_LIST_ENTRY VBOX_SHCL_CPARMS_LIST_ENTRY_REQ + 3

/**
 * Opens a Shared Clipboard object.
 */
typedef struct _VBoxShClObjOpenMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in/out: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, out: Object handle. */
    HGCMFunctionParameter uHandle;
    /** pointer, in: Absoulte path of object to open/create. */
    HGCMFunctionParameter szPath;
    /** uint32_t in: Open / Create flags of type SHCL_OBJ_CF_. */
    HGCMFunctionParameter fCreate;
} VBoxShClObjOpenMsg;

#define VBOX_SHCL_CPARMS_OBJ_OPEN 4

/**
 * Closes a Shared Clipboard object.
 */
typedef struct _VBoxShClObjCloseMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in/out: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, in: SHCLOBJHANDLE of object to close. */
    HGCMFunctionParameter uHandle;
} VBoxShClObjCloseMsg;

#define VBOX_SHCL_CPARMS_OBJ_CLOSE 2

/**
 * Structure for keeping read parameters of a Shared Clipboard object.
 */
typedef struct _VBoxShClObjReadReqParms
{
    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, in: SHCLOBJHANDLE of object to write to. */
    HGCMFunctionParameter uHandle;
    /** uint32_t, in: How many bytes to read. */
    HGCMFunctionParameter cbToRead;
    /** uint32_t, in: Read flags. Currently unused and must be 0. */
    HGCMFunctionParameter fRead;
} VBoxShClObjReadReqParms;

/**
 * Reads from a Shared Clipboard object.
 */
typedef struct _VBoxShClObjReadReqMsg
{
    VBGLIOCHGCMCALL hdr;

    VBoxShClObjReadReqParms ReqParms;
} VBoxShClObjReadReqMsg;

#define VBOX_SHCL_CPARMS_OBJ_READ_REQ 4

/**
 * Reads / writes data of / to an object.
 *
 * Used by:
 * VBOX_SHCL_FN_OBJ_READ
 * VBOX_SHCL_FN_OBJ_WRITE
 */
typedef struct _VBoxShClObjReadWriteMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in/out: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint64_t, in/out: SHCLOBJHANDLE of object to write to. */
    HGCMFunctionParameter uHandle;
    /** uint32_t, out: Size (in bytes) read/written. */
    HGCMFunctionParameter cbData;
    /** pointer, in/out: Current data chunk. */
    HGCMFunctionParameter pvData;
    /** uint32_t, in/out: Size (in bytes) of current data chunk checksum. */
    HGCMFunctionParameter cbChecksum;
    /** pointer, in/out: Checksum of data block, based on the checksum
     *  type in the data header. Optional. */
    HGCMFunctionParameter pvChecksum;
} VBoxShClObjReadWriteMsg;

#define VBOX_SHCL_CPARMS_OBJ_READ  6
#define VBOX_SHCL_CPARMS_OBJ_WRITE 6

/**
 * Sends an error event.
 *
 * Used by:
 * VBOX_SHCL_FN_WRITE_ERROR
 */
typedef struct _VBoxShClErrorMsg
{
    VBGLIOCHGCMCALL hdr;

    /** uint64_t, in: Context ID. */
    HGCMFunctionParameter uContext;
    /** uint32_t, in: The error code (IPRT-style). */
    HGCMFunctionParameter rc;
} VBoxShClWriteErrorMsg;

#define VBOX_SHCL_CPARMS_ERROR 2

/** @name VBOX_SHCL_GUEST_FN_NEGOTIATE_CHUNK_SIZE
 * @{  */
/** VBOX_SHCL_GUEST_FN_NEGOTIATE_CHUNK_SIZE parameters. */
typedef struct _VBoxShClParmNegotiateChunkSize
{
    VBGLIOCHGCMCALL hdr;

    /** uint32_t, in: Maximum chunk size. */
    HGCMFunctionParameter cb32MaxChunkSize;
    /** uint32_t, in: Default chunk size. */
    HGCMFunctionParameter cb32ChunkSize;
} VBoxShClParmNegotiateChunkSize;

#define VBOX_SHCL_CPARMS_NEGOTIATE_CHUNK_SIZE     2
/** @} */

#pragma pack()

#endif /* !VBOX_INCLUDED_HostServices_VBoxClipboardSvc_h */