dbg.h@ 41279

Last change on this file since 41279 was 39154, checked in by vboxsync, 13 years ago
IOM: Added flags for dropping into the vbox debugger on complicated MMIO accesses. DBGF: some namespace cleanups.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 35.1 KB

Line
1	/** @file
2	* Debugger Interfaces. (VBoxDbg)
3	*
4	* This header covers all external interfaces of the Debugger module.
5	* However, it does not cover the DBGF interface since that part of the
6	* VMM. Use dbgf.h for that.
7	*/
8
9	/*
10	* Copyright (C) 2006-2007 Oracle Corporation
11	*
12	* This file is part of VirtualBox Open Source Edition (OSE), as
13	* available from http://www.virtualbox.org. This file is free software;
14	* you can redistribute it and/or modify it under the terms of the GNU
15	* General Public License (GPL) as published by the Free Software
16	* Foundation, in version 2 as it comes in the "COPYING" file of the
17	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
18	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
19	*
20	* The contents of this file may alternatively be used under the terms
21	* of the Common Development and Distribution License Version 1.0
22	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
23	* VirtualBox OSE distribution, in which case the provisions of the
24	* CDDL are applicable instead of those of the GPL.
25	*
26	* You may elect to license modified versions of this file under the
27	* terms and conditions of either the GPL or the CDDL or both.
28	*/
29
30	#ifndef ___VBox_dbg_h
31	#define ___VBox_dbg_h
32
33	#include <VBox/cdefs.h>
34	#include <VBox/types.h>
35	#include <VBox/vmm/dbgf.h>
36
37	#include <iprt/stdarg.h>
38	#ifdef IN_RING3
39	# include <iprt/err.h>
40	#endif
41
42	RT_C_DECLS_BEGIN
43
44	#ifdef IN_RING3 /* The debugger stuff is ring-3 only. */
45
46	/** @def VBOX_WITH_DEBUGGER
47	* The build is with debugger module. Test if this is defined before registering
48	* external debugger commands. This is normally defined in Config.kmk.
49	*/
50	#ifdef DOXYGEN_RUNNING
51	# define VBOX_WITH_DEBUGGER
52	#endif
53
54
55	/**
56	* DBGC variable category.
57	*
58	* Used to describe an argument to a command or function and a functions
59	* return value.
60	*/
61	typedef enum DBGCVARCAT
62	{
63	/** Any type is fine. */
64	DBGCVAR_CAT_ANY = 0,
65	/** Any kind of pointer or number. */
66	DBGCVAR_CAT_POINTER_NUMBER,
67	/** Any kind of pointer or number, no range. */
68	DBGCVAR_CAT_POINTER_NUMBER_NO_RANGE,
69	/** Any kind of pointer. */
70	DBGCVAR_CAT_POINTER,
71	/** Any kind of pointer with no range option. */
72	DBGCVAR_CAT_POINTER_NO_RANGE,
73	/** GC pointer. */
74	DBGCVAR_CAT_GC_POINTER,
75	/** GC pointer with no range option. */
76	DBGCVAR_CAT_GC_POINTER_NO_RANGE,
77	/** Numeric argument. */
78	DBGCVAR_CAT_NUMBER,
79	/** Numeric argument with no range option. */
80	DBGCVAR_CAT_NUMBER_NO_RANGE,
81	/** String. */
82	DBGCVAR_CAT_STRING,
83	/** Symbol. */
84	DBGCVAR_CAT_SYMBOL,
85	/** Option. */
86	DBGCVAR_CAT_OPTION,
87	/** Option + string. */
88	DBGCVAR_CAT_OPTION_STRING,
89	/** Option + number. */
90	DBGCVAR_CAT_OPTION_NUMBER
91	} DBGCVARCAT;
92
93
94	/**
95	* DBGC variable type.
96	*/
97	typedef enum DBGCVARTYPE
98	{
99	/** unknown... */
100	DBGCVAR_TYPE_UNKNOWN = 0,
101	/** Flat GC pointer. */
102	DBGCVAR_TYPE_GC_FLAT,
103	/** Segmented GC pointer. */
104	DBGCVAR_TYPE_GC_FAR,
105	/** Physical GC pointer. */
106	DBGCVAR_TYPE_GC_PHYS,
107	/** Flat HC pointer. */
108	DBGCVAR_TYPE_HC_FLAT,
109	/** Physical HC pointer. */
110	DBGCVAR_TYPE_HC_PHYS,
111	/** String. */
112	DBGCVAR_TYPE_STRING,
113	/** Number. */
114	DBGCVAR_TYPE_NUMBER,
115	/** Symbol.
116	* @todo drop this */
117	DBGCVAR_TYPE_SYMBOL,
118	/** Special type used when querying symbols. */
119	DBGCVAR_TYPE_ANY
120	} DBGCVARTYPE;
121
122	/** @todo Rename to DBGCVAR_IS_xyz. */
123
124	/** Checks if the specified variable type is of a pointer persuasion. */
125	#define DBGCVAR_ISPOINTER(enmType) ((enmType) >= DBGCVAR_TYPE_GC_FLAT && enmType <= DBGCVAR_TYPE_HC_PHYS)
126	/** Checks if the specified variable type is of a pointer persuasion. */
127	#define DBGCVAR_IS_FAR_PTR(enmType) ((enmType) == DBGCVAR_TYPE_GC_FAR)
128	/** Checks if the specified variable type is of a pointer persuasion and of the guest context sort. */
129	#define DBGCVAR_ISGCPOINTER(enmType) ((enmType) >= DBGCVAR_TYPE_GC_FLAT && (enmType) <= DBGCVAR_TYPE_GC_PHYS)
130	/** Checks if the specified variable type is of a pointer persuasion and of the host context sort. */
131	#define DBGCVAR_ISHCPOINTER(enmType) ((enmType) >= DBGCVAR_TYPE_HC_FLAT && (enmType) <= DBGCVAR_TYPE_HC_PHYS)
132
133
134	/**
135	* DBGC variable range type.
136	*/
137	typedef enum DBGCVARRANGETYPE
138	{
139	/** No range appliable or no range specified. */
140	DBGCVAR_RANGE_NONE = 0,
141	/** Number of elements. */
142	DBGCVAR_RANGE_ELEMENTS,
143	/** Number of bytes. */
144	DBGCVAR_RANGE_BYTES
145	} DBGCVARRANGETYPE;
146
147
148	/**
149	* Variable descriptor.
150	*/
151	typedef struct DBGCVARDESC
152	{
153	/** The minimal number of times this argument may occur.
154	* Use 0 here to inidicate that the argument is optional. */
155	unsigned cTimesMin;
156	/** Maximum number of occurrences.
157	* Use ~0 here to indicate infinite. */
158	unsigned cTimesMax;
159	/** Argument category. */
160	DBGCVARCAT enmCategory;
161	/** Flags, DBGCVD_FLAGS_* */
162	unsigned fFlags;
163	/** Argument name. */
164	const char *pszName;
165	/** Argument name. */
166	const char *pszDescription;
167	} DBGCVARDESC;
168	/** Pointer to an argument descriptor. */
169	typedef DBGCVARDESC *PDBGCVARDESC;
170	/** Pointer to a const argument descriptor. */
171	typedef const DBGCVARDESC *PCDBGCVARDESC;
172
173	/** Variable descriptor flags.
174	* @{ */
175	/** Indicates that the variable depends on the previous being present. */
176	#define DBGCVD_FLAGS_DEP_PREV RT_BIT(1)
177	/** @} */
178
179
180	/**
181	* DBGC variable.
182	*/
183	typedef struct DBGCVAR
184	{
185	/** Pointer to the argument descriptor. */
186	PCDBGCVARDESC pDesc;
187	/** Pointer to the next argument. */
188	struct DBGCVAR *pNext;
189
190	/** Argument type. */
191	DBGCVARTYPE enmType;
192	/** Type specific. */
193	union
194	{
195	/** Flat GC Address. (DBGCVAR_TYPE_GC_FLAT) */
196	RTGCPTR GCFlat;
197	/** Far (16:32) GC Address. (DBGCVAR_TYPE_GC_FAR) */
198	RTFAR32 GCFar;
199	/** Physical GC Address. (DBGCVAR_TYPE_GC_PHYS) */
200	RTGCPHYS GCPhys;
201	/** Flat HC Address. (DBGCVAR_TYPE_HC_FLAT) */
202	void *pvHCFlat;
203	/** Physical GC Address. (DBGCVAR_TYPE_HC_PHYS) */
204	RTHCPHYS HCPhys;
205	/** String. (DBGCVAR_TYPE_STRING)
206	* The basic idea is the the this is a pointer to the expression we're
207	* parsing, so no messing with freeing. */
208	const char *pszString;
209	/** Number. (DBGCVAR_TYPE_NUMBER) */
210	uint64_t u64Number;
211	} u;
212
213	/** Range type. */
214	DBGCVARRANGETYPE enmRangeType;
215	/** Range. The use of the content depends on the enmRangeType. */
216	uint64_t u64Range;
217	} DBGCVAR;
218	/** Pointer to a command argument. */
219	typedef DBGCVAR *PDBGCVAR;
220	/** Pointer to a const command argument. */
221	typedef const DBGCVAR *PCDBGCVAR;
222
223
224	/**
225	* Macro for initializing a DBGC variable with defaults.
226	* The result is an unknown variable type without any range.
227	*/
228	#define DBGCVAR_INIT(pVar) \
229	do { \
230	(pVar)->pDesc = NULL;\
231	(pVar)->pNext = NULL; \
232	(pVar)->enmType = DBGCVAR_TYPE_UNKNOWN; \
233	(pVar)->u.u64Number = 0; \
234	(pVar)->enmRangeType = DBGCVAR_RANGE_NONE; \
235	(pVar)->u64Range = 0; \
236	} while (0)
237
238	/**
239	* Macro for initializing a DBGC variable with a HC physical address.
240	*/
241	#define DBGCVAR_INIT_HC_PHYS(pVar, Phys) \
242	do { \
243	DBGCVAR_INIT(pVar); \
244	(pVar)->enmType = DBGCVAR_TYPE_HC_PHYS; \
245	(pVar)->u.HCPhys = (Phys); \
246	} while (0)
247
248	/**
249	* Macro for initializing a DBGC variable with a HC flat address.
250	*/
251	#define DBGCVAR_INIT_HC_FLAT(pVar, Flat) \
252	do { \
253	DBGCVAR_INIT(pVar); \
254	(pVar)->enmType = DBGCVAR_TYPE_HC_FLAT; \
255	(pVar)->u.pvHCFlat = (Flat); \
256	} while (0)
257
258	/**
259	* Macro for initializing a DBGC variable with a GC physical address.
260	*/
261	#define DBGCVAR_INIT_GC_PHYS(pVar, Phys) \
262	do { \
263	DBGCVAR_INIT(pVar); \
264	(pVar)->enmType = DBGCVAR_TYPE_GC_PHYS; \
265	(pVar)->u.GCPhys = (Phys); \
266	} while (0)
267
268	/**
269	* Macro for initializing a DBGC variable with a GC flat address.
270	*/
271	#define DBGCVAR_INIT_GC_FLAT(pVar, Flat) \
272	do { \
273	DBGCVAR_INIT(pVar); \
274	(pVar)->enmType = DBGCVAR_TYPE_GC_FLAT; \
275	(pVar)->u.GCFlat = (Flat); \
276	} while (0)
277
278	/**
279	* Macro for initializing a DBGC variable with a GC flat address.
280	*/
281	#define DBGCVAR_INIT_GC_FLAT_BYTE_RANGE(pVar, Flat, cbRange) \
282	do { \
283	DBGCVAR_INIT(pVar); \
284	(pVar)->enmType = DBGCVAR_TYPE_GC_FLAT; \
285	(pVar)->u.GCFlat = (Flat); \
286	DBGCVAR_SET_RANGE(pVar, DBGCVAR_RANGE_BYTES, cbRange); \
287	} while (0)
288
289	/**
290	* Macro for initializing a DBGC variable with a GC far address.
291	*/
292	#define DBGCVAR_INIT_GC_FAR(pVar, _sel, _off) \
293	do { \
294	DBGCVAR_INIT(pVar); \
295	(pVar)->enmType = DBGCVAR_TYPE_GC_FAR; \
296	(pVar)->u.GCFar.sel = (_sel); \
297	(pVar)->u.GCFar.off = (_off); \
298	} while (0)
299
300	/**
301	* Macro for initializing a DBGC variable with a number.
302	*/
303	#define DBGCVAR_INIT_NUMBER(pVar, Value) \
304	do { \
305	DBGCVAR_INIT(pVar); \
306	(pVar)->enmType = DBGCVAR_TYPE_NUMBER; \
307	(pVar)->u.u64Number = (Value); \
308	} while (0)
309
310	/**
311	* Macro for initializing a DBGC variable with a string.
312	*/
313	#define DBGCVAR_INIT_STRING(pVar, a_pszString) \
314	do { \
315	DBGCVAR_INIT(pVar); \
316	(pVar)->enmType = DBGCVAR_TYPE_STRING; \
317	(pVar)->enmRangeType = DBGCVAR_RANGE_BYTES; \
318	(pVar)->u.pszString = (a_pszString); \
319	(pVar)->u64Range = strlen(a_pszString); \
320	} while (0)
321
322
323	/**
324	* Macro for setting the range of a DBGC variable.
325	* @param pVar The variable.
326	* @param _enmRangeType The range type.
327	* @param Value The range length value.
328	*/
329	#define DBGCVAR_SET_RANGE(pVar, _enmRangeType, Value) \
330	do { \
331	(pVar)->enmRangeType = (_enmRangeType); \
332	(pVar)->u64Range = (Value); \
333	} while (0)
334
335
336	/**
337	* Macro for setting the range of a DBGC variable.
338	* @param a_pVar The variable.
339	* @param a_cbRange The range, in bytes.
340	*/
341	#define DBGCVAR_SET_BYTE_RANGE(a_pVar, a_cbRange) \
342	DBGCVAR_SET_RANGE(a_pVar, DBGCVAR_RANGE_BYTES, a_cbRange)
343
344
345	/**
346	* Macro for resetting the range a DBGC variable.
347	* @param a_pVar The variable.
348	*/
349	#define DBGCVAR_ZAP_RANGE(a_pVar) \
350	do { \
351	(a_pVar)->enmRangeType = DBGCVAR_RANGE_NONE; \
352	(a_pVar)->u64Range = 0; \
353	} while (0)
354
355
356	/**
357	* Macro for assigning one DBGC variable to another.
358	* @param a_pResult The result (target) variable.
359	* @param a_pVar The source variable.
360	*/
361	#define DBGCVAR_ASSIGN(a_pResult, a_pVar) \
362	do { \
363	(a_pResult) = (a_pVar); \
364	} while (0)
365
366
367	/** Pointer to command descriptor. */
368	typedef struct DBGCCMD *PDBGCCMD;
369	/** Pointer to const command descriptor. */
370	typedef const struct DBGCCMD *PCDBGCCMD;
371
372	/** Pointer to helper functions for commands. */
373	typedef struct DBGCCMDHLP *PDBGCCMDHLP;
374
375
376	/**
377	* Helper functions for commands.
378	*/
379	typedef struct DBGCCMDHLP
380	{
381	/** Magic value (DBGCCMDHLP_MAGIC). */
382	uint32_t u32Magic;
383
384	/**
385	* Command helper for writing formatted text to the debug console.
386	*
387	* @returns VBox status.
388	* @param pCmdHlp Pointer to the command callback structure.
389	* @param pcb Where to store the number of bytes written.
390	* @param pszFormat The format string.
391	* This is using the log formatter, so it's format extensions can be used.
392	* @param ... Arguments specified in the format string.
393	*/
394	DECLCALLBACKMEMBER(int, pfnPrintf)(PDBGCCMDHLP pCmdHlp, size_t pcbWritten, const char pszFormat, ...);
395
396	/**
397	* Command helper for writing formatted text to the debug console.
398	*
399	* @returns VBox status.
400	* @param pCmdHlp Pointer to the command callback structure.
401	* @param pcb Where to store the number of bytes written.
402	* @param pszFormat The format string.
403	* This is using the log formatter, so it's format extensions can be used.
404	* @param args Arguments specified in the format string.
405	*/
406	DECLCALLBACKMEMBER(int, pfnPrintfV)(PDBGCCMDHLP pCmdHlp, size_t pcbWritten, const char pszFormat, va_list args);
407
408	/**
409	* Command helper for formatting and error message for a VBox status code.
410	*
411	* @returns VBox status code appropriate to return from a command.
412	* @param pCmdHlp Pointer to the command callback structure.
413	* @param rc The VBox status code.
414	* @param pszFormat Format string for additional messages. Can be NULL.
415	* @param ... Format arguments, optional.
416	*/
417	DECLCALLBACKMEMBER(int, pfnVBoxError)(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, ...);
418
419	/**
420	* Command helper for formatting and error message for a VBox status code.
421	*
422	* @returns VBox status code appropriate to return from a command.
423	* @param pCmdHlp Pointer to the command callback structure.
424	* @param rc The VBox status code.
425	* @param pcb Where to store the number of bytes written.
426	* @param pszFormat Format string for additional messages. Can be NULL.
427	* @param args Format arguments, optional.
428	*/
429	DECLCALLBACKMEMBER(int, pfnVBoxErrorV)(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, va_list args);
430
431	/**
432	* Command helper for reading memory specified by a DBGC variable.
433	*
434	* @returns VBox status code appropriate to return from a command.
435	* @param pCmdHlp Pointer to the command callback structure.
436	* @param pVM VM handle if GC or physical HC address.
437	* @param pvBuffer Where to store the read data.
438	* @param cbRead Number of bytes to read.
439	* @param pVarPointer DBGC variable specifying where to start reading.
440	* @param pcbRead Where to store the number of bytes actually read.
441	* This optional, but it's useful when read GC virtual memory where a
442	* page in the requested range might not be present.
443	* If not specified not-present failure or end of a HC physical page
444	* will cause failure.
445	*/
446	DECLCALLBACKMEMBER(int, pfnMemRead)(PDBGCCMDHLP pCmdHlp, PVM pVM, void pvBuffer, size_t cbRead, PCDBGCVAR pVarPointer, size_t pcbRead);
447
448	/**
449	* Command helper for writing memory specified by a DBGC variable.
450	*
451	* @returns VBox status code appropriate to return from a command.
452	* @param pCmdHlp Pointer to the command callback structure.
453	* @param pVM VM handle if GC or physical HC address.
454	* @param pvBuffer What to write.
455	* @param cbWrite Number of bytes to write.
456	* @param pVarPointer DBGC variable specifying where to start reading.
457	* @param pcbWritten Where to store the number of bytes written.
458	* This is optional. If NULL be aware that some of the buffer
459	* might have been written to the specified address.
460	*/
461	DECLCALLBACKMEMBER(int, pfnMemWrite)(PDBGCCMDHLP pCmdHlp, PVM pVM, const void pvBuffer, size_t cbWrite, PCDBGCVAR pVarPointer, size_t pcbWritten);
462
463	/**
464	* Executes command an expression.
465	* (Hopefully the parser and functions are fully reentrant.)
466	*
467	* @returns VBox status code appropriate to return from a command.
468	* @param pCmdHlp Pointer to the command callback structure.
469	* @param pszExpr The expression. Format string with the format DBGC extensions.
470	* @param ... Format arguments.
471	*/
472	DECLCALLBACKMEMBER(int, pfnExec)(PDBGCCMDHLP pCmdHlp, const char *pszExpr, ...);
473
474	/**
475	* Evaluates an expression.
476	* (Hopefully the parser and functions are fully reentrant.)
477	*
478	* @returns VBox status code appropriate to return from a command.
479	* @param pCmdHlp Pointer to the command callback structure.
480	* @param pResult Where to store the result.
481	* @param pszExpr The expression. Format string with the format DBGC extensions.
482	* @param va Format arguments.
483	*/
484	DECLCALLBACKMEMBER(int, pfnEvalV)(PDBGCCMDHLP pCmdHlp, PDBGCVAR pResult, const char *pszExpr, va_list va);
485
486	/**
487	* Print an error and fail the current command.
488	*
489	* @returns VBox status code to pass upwards.
490	*
491	* @param pCmdHlp Pointer to the command callback structure.
492	* @param pCmd The failing command.
493	* @param pszFormat The error message format string.
494	* @param va Format arguments.
495	*/
496	DECLCALLBACKMEMBER(int, pfnFailV)(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, const char *pszFormat, va_list va);
497
498	/**
499	* Print an error and fail the current command.
500	*
501	* @returns VBox status code to pass upwards.
502	*
503	* @param pCmdHlp Pointer to the command callback structure.
504	* @param pCmd The failing command.
505	* @param rc The status code indicating the failure. This will
506	* be appended to the message after a colon (': ').
507	* @param pszFormat The error message format string.
508	* @param va Format arguments.
509	*
510	* @see DBGCCmdHlpFailRc
511	*/
512	DECLCALLBACKMEMBER(int, pfnFailRcV)(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, int rc, const char *pszFormat, va_list va);
513
514	/**
515	* Parser error.
516	*
517	* @returns VBox status code to pass upwards.
518	*
519	* @param pCmdHlp Pointer to the command callback structure.
520	* @param pCmd The failing command, can be NULL but shouldn't.
521	* @param iArg The offending argument, -1 when lazy.
522	* @param pszExpr The expression.
523	* @param iLine The line number.
524	*/
525	DECLCALLBACKMEMBER(int, pfnParserError)(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, int iArg, const char *pszExpr, unsigned iLine);
526
527	/**
528	* Converts a DBGC variable to a DBGF address structure.
529	*
530	* @returns VBox status code.
531	* @param pCmdHlp Pointer to the command callback structure.
532	* @param pVar The variable to convert.
533	* @param pAddress The target address.
534	*/
535	DECLCALLBACKMEMBER(int, pfnVarToDbgfAddr)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, PDBGFADDRESS pAddress);
536
537	/**
538	* Converts a DBGF address structure to a DBGC variable.
539	*
540	* @returns VBox status code.
541	* @param pCmdHlp Pointer to the command callback structure.
542	* @param pAddress The source address.
543	* @param pResult The result variable.
544	*/
545	DECLCALLBACKMEMBER(int, pfnVarFromDbgfAddr)(PDBGCCMDHLP pCmdHlp, PCDBGFADDRESS pAddress, PDBGCVAR pResult);
546
547	/**
548	* Converts a DBGC variable to a 64-bit number.
549	*
550	* @returns VBox status code.
551	* @param pCmdHlp Pointer to the command callback structure.
552	* @param pVar The variable to convert.
553	* @param pu64Number Where to store the number.
554	*/
555	DECLCALLBACKMEMBER(int, pfnVarToNumber)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, uint64_t *pu64Number);
556
557	/**
558	* Converts a DBGC variable to a boolean.
559	*
560	* @returns VBox status code.
561	* @param pCmdHlp Pointer to the command callback structure.
562	* @param pVar The variable to convert.
563	* @param pf Where to store the boolean.
564	*/
565	DECLCALLBACKMEMBER(int, pfnVarToBool)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, bool *pf);
566
567	/**
568	* Get the range of a variable in bytes, resolving symbols if necessary.
569	*
570	* @returns VBox status code.
571	* @param pCmdHlp Pointer to the command callback structure.
572	* @param pVar The variable to convert.
573	* @param cbElement Conversion factor for element ranges.
574	* @param cbDefault The default range.
575	* @param pcbRange The length of the range.
576	*/
577	DECLCALLBACKMEMBER(int, pfnVarGetRange)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, uint64_t cbElement, uint64_t cbDefault,
578	uint64_t *pcbRange);
579
580	/**
581	* Converts a variable to one with the specified type.
582	*
583	* This preserves the range.
584	*
585	* @returns VBox status code.
586	* @param pCmdHlp Pointer to the command callback structure.
587	* @param pVar The variable to convert.
588	* @param enmToType The target type.
589	* @param fConvSyms If @c true, then attempt to resolve symbols.
590	* @param pResult The output variable. Can be the same as @a pVar.
591	*/
592	DECLCALLBACKMEMBER(int, pfnVarConvert)(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, DBGCVARTYPE enmToType, bool fConvSyms,
593	PDBGCVAR pResult);
594
595	/**
596	* Gets a DBGF output helper that directs the output to the debugger
597	* console.
598	*
599	* @returns Pointer to the helper structure.
600	* @param pCmdHlp Pointer to the command callback structure.
601	*/
602	DECLCALLBACKMEMBER(PCDBGFINFOHLP, pfnGetDbgfOutputHlp)(PDBGCCMDHLP pCmdHlp);
603
604	/** End marker (DBGCCMDHLP_MAGIC). */
605	uint32_t u32EndMarker;
606	} DBGCCMDHLP;
607
608	/** Magic value for DBGCCMDHLP::u32Magic. (Fyodor Mikhaylovich Dostoyevsky) */
609	#define DBGCCMDHLP_MAGIC UINT32_C(18211111)
610
611
612	#ifdef IN_RING3
613
614	/**
615	* Command helper for writing formatted text to the debug console.
616	*
617	* @returns VBox status.
618	* @param pCmdHlp Pointer to the command callback structure.
619	* @param pszFormat The format string.
620	* This is using the log formatter, so it's format extensions can be used.
621	* @param ... Arguments specified in the format string.
622	*/
623	DECLINLINE(int) DBGCCmdHlpPrintf(PDBGCCMDHLP pCmdHlp, const char *pszFormat, ...)
624	{
625	va_list va;
626	int rc;
627
628	va_start(va, pszFormat);
629	rc = pCmdHlp->pfnPrintfV(pCmdHlp, NULL, pszFormat, va);
630	va_end(va);
631
632	return rc;
633	}
634
635	/**
636	* @copydoc FNDBGCHLPVBOXERROR
637	*/
638	DECLINLINE(int) DBGCCmdHlpVBoxError(PDBGCCMDHLP pCmdHlp, int rc, const char *pszFormat, ...)
639	{
640	va_list va;
641
642	va_start(va, pszFormat);
643	rc = pCmdHlp->pfnVBoxErrorV(pCmdHlp, rc, pszFormat, va);
644	va_end(va);
645
646	return rc;
647	}
648
649	/**
650	* @copydoc FNDBGCHLPMEMREAD
651	*/
652	DECLINLINE(int) DBGCCmdHlpMemRead(PDBGCCMDHLP pCmdHlp, PVM pVM, void pvBuffer, size_t cbRead, PCDBGCVAR pVarPointer, size_t pcbRead)
653	{
654	return pCmdHlp->pfnMemRead(pCmdHlp, pVM, pvBuffer, cbRead, pVarPointer, pcbRead);
655	}
656
657	/**
658	* Evaluates an expression.
659	* (Hopefully the parser and functions are fully reentrant.)
660	*
661	* @returns VBox status code appropriate to return from a command.
662	* @param pCmdHlp Pointer to the command callback structure.
663	* @param pResult Where to store the result.
664	* @param pszExpr The expression. Format string with the format DBGC extensions.
665	* @param ... Format arguments.
666	*/
667	DECLINLINE(int) DBGCCmdHlpEval(PDBGCCMDHLP pCmdHlp, PDBGCVAR pResult, const char *pszExpr, ...)
668	{
669	va_list va;
670	int rc;
671
672	va_start(va, pszExpr);
673	rc = pCmdHlp->pfnEvalV(pCmdHlp, pResult, pszExpr, va);
674	va_end(va);
675
676	return rc;
677	}
678
679	/**
680	* Print an error and fail the current command.
681	*
682	* @returns VBox status code to pass upwards.
683	*
684	* @param pCmdHlp Pointer to the command callback structure.
685	* @param pCmd The failing command.
686	* @param pszFormat The error message format string.
687	* @param ... Format arguments.
688	*/
689	DECLINLINE(int) DBGCCmdHlpFail(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, const char *pszFormat, ...)
690	{
691	va_list va;
692	int rc;
693
694	va_start(va, pszFormat);
695	rc = pCmdHlp->pfnFailV(pCmdHlp, pCmd, pszFormat, va);
696	va_end(va);
697
698	return rc;
699	}
700
701	/**
702	* Print an error and fail the current command.
703	*
704	* Usage example:
705	* @code
706	int rc = VMMR3Something(pVM);
707	if (RT_FAILURE(rc))
708	return DBGCCmdHlpFailRc(pCmdHlp, pCmd, rc, "VMMR3Something");
709	return VINF_SUCCESS;
710	* @endcode
711	*
712	* @returns VBox status code to pass upwards.
713	*
714	* @param pCmdHlp Pointer to the command callback structure.
715	* @param pCmd The failing command.
716	* @param rc The status code indicating the failure.
717	* @param pszFormat The error message format string.
718	* @param ... Format arguments.
719	*/
720	DECLINLINE(int) DBGCCmdHlpFailRc(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, int rc, const char *pszFormat, ...)
721	{
722	va_list va;
723
724	va_start(va, pszFormat);
725	rc = pCmdHlp->pfnFailRcV(pCmdHlp, pCmd, rc, pszFormat, va);
726	va_end(va);
727
728	return rc;
729	}
730
731	/**
732	* @copydoc DBGCCMDHLP::pfnParserError
733	*/
734	DECLINLINE(int) DBGCCmdHlpParserError(PDBGCCMDHLP pCmdHlp, PCDBGCCMD pCmd, int iArg, const char *pszExpr, unsigned iLine)
735	{
736	return pCmdHlp->pfnParserError(pCmdHlp, pCmd, iArg, pszExpr, iLine);
737	}
738
739	/** Assert+return like macro for checking parser sanity.
740	* Returns with failure if the precodition is not met. */
741	#define DBGC_CMDHLP_ASSERT_PARSER_RET(pCmdHlp, pCmd, iArg, expr) \
742	do { \
743	if (!(expr)) \
744	return DBGCCmdHlpParserError(pCmdHlp, pCmd, iArg, #expr, __LINE__); \
745	} while (0)
746
747	/** Assert+return like macro that the VM handle is present.
748	* Returns with failure if the VM handle is NIL. */
749	#define DBGC_CMDHLP_REQ_VM_RET(pCmdHlp, pCmd, pVM) \
750	do { \
751	if (!(pVM)) \
752	return DBGCCmdHlpFail(pCmdHlp, pCmd, "No VM selected"); \
753	} while (0)
754
755	/**
756	* @copydoc DBGCCMDHLP::pfnVarToDbgfAddr
757	*/
758	DECLINLINE(int) DBGCCmdHlpVarToDbgfAddr(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, PDBGFADDRESS pAddress)
759	{
760	return pCmdHlp->pfnVarToDbgfAddr(pCmdHlp, pVar, pAddress);
761	}
762
763	/**
764	* @copydoc DBGCCMDHLP::pfnVarToDbgfAddr
765	*/
766	DECLINLINE(int) DBGCCmdHlpVarFromDbgfAddr(PDBGCCMDHLP pCmdHlp, PCDBGFADDRESS pAddress, PDBGCVAR pResult)
767	{
768	return pCmdHlp->pfnVarFromDbgfAddr(pCmdHlp, pAddress, pResult);
769	}
770
771	/**
772	* Converts an variable to a flat address.
773	*
774	* @returns VBox status code.
775	* @param pCmdHlp Pointer to the command callback structure.
776	* @param pVar The variable to convert.
777	* @param pFlatPtr Where to store the flat address.
778	*/
779	DECLINLINE(int) DBGCCmdHlpVarToFlatAddr(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, PRTGCPTR pFlatPtr)
780	{
781	DBGFADDRESS Addr;
782	int rc = pCmdHlp->pfnVarToDbgfAddr(pCmdHlp, pVar, &Addr);
783	if (RT_SUCCESS(rc))
784	*pFlatPtr = Addr.FlatPtr;
785	return rc;
786	}
787
788	/**
789	* @copydoc DBGCCMDHLP::pfnVarToNumber
790	*/
791	DECLINLINE(int) DBGCCmdHlpVarToNumber(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, uint64_t *pu64Number)
792	{
793	return pCmdHlp->pfnVarToNumber(pCmdHlp, pVar, pu64Number);
794	}
795
796	/**
797	* @copydoc DBGCCMDHLP::pfnVarToBool
798	*/
799	DECLINLINE(int) DBGCCmdHlpVarToBool(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, bool *pf)
800	{
801	return pCmdHlp->pfnVarToBool(pCmdHlp, pVar, pf);
802	}
803
804	/**
805	* @copydoc DBGCCMDHLP::pfnVarGetRange
806	*/
807	DECLINLINE(int) DBGCCmdHlpVarGetRange(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, uint64_t cbElement, uint64_t cbDefault, uint64_t *pcbRange)
808	{
809	return pCmdHlp->pfnVarGetRange(pCmdHlp, pVar, cbElement, cbDefault, pcbRange);
810	}
811
812	/**
813	* @copydoc DBGCCMDHLP::pfnVarConvert
814	*/
815	DECLINLINE(int) DBGCCmdHlpConvert(PDBGCCMDHLP pCmdHlp, PCDBGCVAR pVar, DBGCVARTYPE enmToType, bool fConvSyms, PDBGCVAR pResult)
816	{
817	return pCmdHlp->pfnVarConvert(pCmdHlp, pVar, enmToType, fConvSyms, pResult);
818	}
819
820	/**
821	* @copydoc DBGCCMDHLP::pfnGetDbgfOutputHlp
822	*/
823	DECLINLINE(PCDBGFINFOHLP) DBGCCmdHlpGetDbgfOutputHlp(PDBGCCMDHLP pCmdHlp)
824	{
825	return pCmdHlp->pfnGetDbgfOutputHlp(pCmdHlp);
826	}
827
828	#endif /* IN_RING3 */
829
830
831
832	/**
833	* Command handler.
834	*
835	* The console will call the handler for a command once it's finished
836	* parsing the user input. The command handler function is responsible
837	* for executing the command itself.
838	*
839	* @returns VBox status.
840	* @param pCmd Pointer to the command descriptor (as registered).
841	* @param pCmdHlp Pointer to command helper functions.
842	* @param pVM Pointer to the current VM (if any).
843	* @param paArgs Pointer to (readonly) array of arguments.
844	* @param cArgs Number of arguments in the array.
845	*/
846	typedef DECLCALLBACK(int) FNDBGCCMD(PCDBGCCMD pCmd, PDBGCCMDHLP pCmdHlp, PVM pVM, PCDBGCVAR paArgs, unsigned cArgs);
847	/** Pointer to a FNDBGCCMD() function. */
848	typedef FNDBGCCMD *PFNDBGCCMD;
849
850	/**
851	* DBGC command descriptor.
852	*
853	* If a pResultDesc is specified the command can be called and used
854	* as a function too. If it's a pure function, set fFlags to
855	* DBGCCMD_FLAGS_FUNCTION.
856	*/
857	typedef struct DBGCCMD
858	{
859	/** Command string. */
860	const char *pszCmd;
861	/** Minimum number of arguments. */
862	unsigned cArgsMin;
863	/** Max number of arguments. */
864	unsigned cArgsMax;
865	/** Argument descriptors (array). */
866	PCDBGCVARDESC paArgDescs;
867	/** Number of argument descriptors. */
868	unsigned cArgDescs;
869	/** flags. (reserved for now) */
870	unsigned fFlags;
871	/** Handler function. */
872	PFNDBGCCMD pfnHandler;
873	/** Command syntax. */
874	const char *pszSyntax;
875	/** Command description. */
876	const char *pszDescription;
877	} DBGCCMD;
878
879	/** DBGCCMD Flags.
880	* @{
881	*/
882	/** @} */
883
884
885
886	/** Pointer to a DBGC backend. */
887	typedef struct DBGCBACK *PDBGCBACK;
888
889	/**
890	* Checks if there is input.
891	*
892	* @returns true if there is input ready.
893	* @returns false if there not input ready.
894	* @param pBack Pointer to the backend structure supplied by
895	* the backend. The backend can use this to find
896	* it's instance data.
897	* @param cMillies Number of milliseconds to wait on input data.
898	*/
899	typedef DECLCALLBACK(bool) FNDBGCBACKINPUT(PDBGCBACK pBack, uint32_t cMillies);
900	/** Pointer to a FNDBGCBACKINPUT() callback. */
901	typedef FNDBGCBACKINPUT *PFNDBGCBACKINPUT;
902
903	/**
904	* Read input.
905	*
906	* @returns VBox status code.
907	* @param pBack Pointer to the backend structure supplied by
908	* the backend. The backend can use this to find
909	* it's instance data.
910	* @param pvBuf Where to put the bytes we read.
911	* @param cbBuf Maximum nymber of bytes to read.
912	* @param pcbRead Where to store the number of bytes actually read.
913	* If NULL the entire buffer must be filled for a
914	* successful return.
915	*/
916	typedef DECLCALLBACK(int) FNDBGCBACKREAD(PDBGCBACK pBack, void pvBuf, size_t cbBuf, size_t pcbRead);
917	/** Pointer to a FNDBGCBACKREAD() callback. */
918	typedef FNDBGCBACKREAD *PFNDBGCBACKREAD;
919
920	/**
921	* Write (output).
922	*
923	* @returns VBox status code.
924	* @param pBack Pointer to the backend structure supplied by
925	* the backend. The backend can use this to find
926	* it's instance data.
927	* @param pvBuf What to write.
928	* @param cbBuf Number of bytes to write.
929	* @param pcbWritten Where to store the number of bytes actually written.
930	* If NULL the entire buffer must be successfully written.
931	*/
932	typedef DECLCALLBACK(int) FNDBGCBACKWRITE(PDBGCBACK pBack, const void pvBuf, size_t cbBuf, size_t pcbWritten);
933	/** Pointer to a FNDBGCBACKWRITE() callback. */
934	typedef FNDBGCBACKWRITE *PFNDBGCBACKWRITE;
935
936	/**
937	* Ready / busy notification.
938	*
939	* @param pBack Pointer to the backend structure supplied by
940	* the backend. The backend can use this to find
941	* it's instance data.
942	* @param fReady Whether it's ready (true) or busy (false).
943	*/
944	typedef DECLCALLBACK(void) FNDBGCBACKSETREADY(PDBGCBACK pBack, bool fReady);
945	/** Pointer to a FNDBGCBACKSETREADY() callback. */
946	typedef FNDBGCBACKSETREADY *PFNDBGCBACKSETREADY;
947
948
949	/**
950	* The communication backend provides the console with a number of callbacks
951	* which can be used
952	*/
953	typedef struct DBGCBACK
954	{
955	/** Check for input. */
956	PFNDBGCBACKINPUT pfnInput;
957	/** Read input. */
958	PFNDBGCBACKREAD pfnRead;
959	/** Write output. */
960	PFNDBGCBACKWRITE pfnWrite;
961	/** Ready / busy notification. */
962	PFNDBGCBACKSETREADY pfnSetReady;
963	} DBGCBACK;
964
965
966	/**
967	* Make a console instance.
968	*
969	* This will not return until either an 'exit' command is issued or a error code
970	* indicating connection loss is encountered.
971	*
972	* @returns VINF_SUCCESS if console termination caused by the 'exit' command.
973	* @returns The VBox status code causing the console termination.
974	*
975	* @param pVM VM Handle.
976	* @param pBack Pointer to the backend structure. This must contain
977	* a full set of function pointers to service the console.
978	* @param fFlags Reserved, must be zero.
979	* @remark A forced termination of the console is easiest done by forcing the
980	* callbacks to return fatal failures.
981	*/
982	DBGDECL(int) DBGCCreate(PVM pVM, PDBGCBACK pBack, unsigned fFlags);
983
984
985	/**
986	* Register one or more external commands.
987	*
988	* @returns VBox status.
989	* @param paCommands Pointer to an array of command descriptors.
990	* The commands must be unique. It's not possible
991	* to register the same commands more than once.
992	* @param cCommands Number of commands.
993	*/
994	DBGDECL(int) DBGCRegisterCommands(PCDBGCCMD paCommands, unsigned cCommands);
995
996
997	/**
998	* Deregister one or more external commands previously registered by
999	* DBGCRegisterCommands().
1000	*
1001	* @returns VBox status.
1002	* @param paCommands Pointer to an array of command descriptors
1003	* as given to DBGCRegisterCommands().
1004	* @param cCommands Number of commands.
1005	*/
1006	DBGDECL(int) DBGCDeregisterCommands(PCDBGCCMD paCommands, unsigned cCommands);
1007
1008
1009	/**
1010	* Spawns a new thread with a TCP based debugging console service.
1011	*
1012	* @returns VBox status.
1013	* @param pVM VM handle.
1014	* @param ppvData Where to store the pointer to instance data.
1015	*/
1016	DBGDECL(int) DBGCTcpCreate(PVM pVM, void **ppvUser);
1017
1018	/**
1019	* Terminates any running TCP base debugger console service.
1020	*
1021	* @returns VBox status.
1022	* @param pVM VM handle.
1023	* @param pvData Instance data set by DBGCTcpCreate().
1024	*/
1025	DBGDECL(int) DBGCTcpTerminate(PVM pVM, void *pvData);
1026
1027
1028	/** @defgroup grp_dbgc_plug_in The DBGC Plug-in Interface
1029	* @{
1030	*/
1031
1032	/** The plug-in module name prefix. */
1033	#define DBGC_PLUG_IN_PREFIX "DBGCPlugIn"
1034
1035	/** The name of the plug-in entry point (FNDBGCPLUGIN) */
1036	#define DBGC_PLUG_IN_ENTRYPOINT "DBGCPlugInEntry"
1037
1038	/**
1039	* DBGC plug-in operations.
1040	*/
1041	typedef enum DBGCPLUGINOP
1042	{
1043	/** The usual invalid first value. */
1044	DBGCPLUGINOP_INVALID,
1045	/** Initialize the plug-in, register all the stuff.
1046	* The plug-in will be unloaded on failure.
1047	* uArg: The VirtualBox version (major+minor). */
1048	DBGCPLUGINOP_INIT,
1049	/** Terminate the plug-ing, deregister all the stuff.
1050	* The plug-in will be unloaded after this call regardless of the return
1051	* code. */
1052	DBGCPLUGINOP_TERM,
1053	/** The usual 32-bit hack. */
1054	DBGCPLUGINOP_32BIT_HACK = 0x7fffffff
1055	} DBGCPLUGINOP;
1056
1057	/**
1058	* DBGC plug-in main entry point.
1059	*
1060	* @returns VBox status code.
1061	*
1062	* @param enmOperation The operation.
1063	* @param pVM The VM handle. This may be NULL.
1064	* @param uArg Extra argument.
1065	*/
1066	typedef DECLCALLBACK(int) FNDBGCPLUGIN(DBGCPLUGINOP enmOperation, PVM pVM, uintptr_t uArg);
1067	/** Pointer to a FNDBGCPLUGIN. */
1068	typedef FNDBGCPLUGIN *PFNDBGCPLUGIN;
1069
1070	/** @copydoc FNDBGCPLUGIN */
1071	DECLEXPORT(int) DBGCPlugInEntry(DBGCPLUGINOP enmOperation, PVM pVM, uintptr_t uArg);
1072
1073	#endif /* IN_RING3 */
1074
1075	/** @} */
1076
1077
1078	RT_C_DECLS_END
1079
1080	#endif

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/dbg.h@ 41279

Download in other formats: