/** @file * VirtualBox Status Codes. */ /* * Copyright (C) 2006-2023 Oracle and/or its affiliates. * * This file is part of VirtualBox base platform packages, as * available from https://www.virtualbox.org. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation, in version 3 of the * License. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, see . * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL), a copy of it is provided in the "COPYING.CDDL" file included * in the VirtualBox distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. * * SPDX-License-Identifier: GPL-3.0-only OR CDDL-1.0 */ #ifndef VBOX_INCLUDED_err_h #define VBOX_INCLUDED_err_h #ifndef RT_WITHOUT_PRAGMA_ONCE # pragma once #endif #include #include /** @defgroup grp_err VBox Error Codes * @{ */ /* SED-START */ /** @name Misc. Status Codes * @{ */ /** Failed to allocate VM memory. */ #define VERR_NO_VM_MEMORY (-1000) /** RC is toasted and the VMM should be terminated at once, but no need to * panic about it :-) */ #define VERR_DONT_PANIC (-1001) /** Unsupported CPU. */ #define VERR_UNSUPPORTED_CPU (-1002) /** Unsupported CPU mode. */ #define VERR_UNSUPPORTED_CPU_MODE (-1003) /** Page not present. */ #define VERR_PAGE_NOT_PRESENT (-1004) /** Invalid/Corrupted configuration file. */ #define VERR_CFG_INVALID_FORMAT (-1005) /** No configuration value exists. */ #define VERR_CFG_NO_VALUE (-1006) /** Selector not present. */ #define VERR_SELECTOR_NOT_PRESENT (-1007) /** Not code selector. */ #define VERR_NOT_CODE_SELECTOR (-1008) /** Not data selector. */ #define VERR_NOT_DATA_SELECTOR (-1009) /** Out of selector bounds. */ #define VERR_OUT_OF_SELECTOR_BOUNDS (-1010) /** Invalid selector. Usually beyond table limits. */ #define VERR_INVALID_SELECTOR (-1011) /** Invalid requested privilege level. */ #define VERR_INVALID_RPL (-1012) /** PML4 entry not present. */ #define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013) /** Page directory pointer not present. */ #define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014) /** Raw mode doesn't support SMP. */ #define VERR_RAW_MODE_INVALID_SMP (-1015) /** Invalid VM handle. */ #define VERR_INVALID_VM_HANDLE (-1016) /** Invalid VM handle. */ #define VERR_INVALID_VMCPU_HANDLE (-1017) /** Invalid Virtual CPU ID. */ #define VERR_INVALID_CPU_ID (-1018) /** Too many VCPUs. */ #define VERR_TOO_MANY_CPUS (-1019) /** The service was disabled on the host. * Returned by pfnInit in VBoxService to indicated a non-fatal error that * should results in the particular service being disabled. */ #define VERR_SERVICE_DISABLED (-1020) /** The requested feature is not supported in raw-mode. */ #define VERR_NOT_SUP_IN_RAW_MODE (-1021) /** Invalid CPU index. */ #define VERR_INVALID_CPU_INDEX (-1022) /** This VirtualBox build does not support raw-mode. */ #define VERR_RAW_MODE_NOT_SUPPORTED (-1023) /** Essential fields in the shared VM structure doesn't match the global one. */ #define VERR_INCONSISTENT_VM_HANDLE (-1024) /** The VM has been restored. */ #define VERR_VM_RESTORED (-1025) /** The requested feature is not supported by NEM. */ #define VERR_NOT_SUP_BY_NEM (-1026) /** @} */ /** @name Execution Monitor/Manager (EM) Status Codes * * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST * are of vital importance. The lower the number the higher importance * as a scheduling instruction. * @{ */ /** First scheduling related status code. */ #define VINF_EM_FIRST 1100 /** Indicating that the VM is being terminated and that the execution * shall stop. */ #define VINF_EM_TERMINATE 1100 /** Hypervisor code was stepped. * EM will first send this to the debugger, and if the issue isn't * resolved there it will enter guru meditation. */ #define VINF_EM_DBG_HYPER_STEPPED 1101 /** Hit a breakpoint in the hypervisor code, * EM will first send this to the debugger, and if the issue isn't * resolved there it will enter guru meditation. */ #define VINF_EM_DBG_HYPER_BREAKPOINT 1102 /** Hit a possible assertion in the hypervisor code, * EM will first send this to the debugger, and if the issue isn't * resolved there it will enter guru meditation. */ #define VINF_EM_DBG_HYPER_ASSERTION 1103 /** Generic debug event, suspend the VM for debugging. */ #define VINF_EM_DBG_EVENT 1104 /** Indicating that the VM should be suspended for debugging because * the developer wants to inspect the VM state. */ #define VINF_EM_DBG_STOP 1105 /** Indicating success single stepping and that EM should report that * event to the debugger. */ #define VINF_EM_DBG_STEPPED 1106 /** Indicating that a breakpoint was hit and that EM should notify the debugger * and in the event there is no debugger fail fatally. */ #define VINF_EM_DBG_BREAKPOINT 1107 /** Indicating that EM should single step an instruction. * The instruction is stepped in the current execution mode (RAW/REM). */ #define VINF_EM_DBG_STEP 1108 /** Indicating that the VM is being turned off and that the EM should * exit to the VM awaiting the destruction request. */ #define VINF_EM_OFF 1109 /** Indicating that the VM has been suspended and that the thread * should wait for request telling it what to do next. */ #define VINF_EM_SUSPEND 1110 /** Indicating that the VM has been reset and that scheduling goes * back to startup defaults. */ #define VINF_EM_RESET 1111 /** Indicating that the VM has executed a halt instruction and that * the emulation thread should wait for an interrupt before resuming * execution. */ #define VINF_EM_HALT 1112 /** Indicating that the VM has been resumed and that the thread should * start executing. */ #define VINF_EM_RESUME 1113 /** Indicating that we've got an out-of-memory condition and that we need * to take the appropriate actions to deal with this. * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT, * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are * vital to correctly operating the VM. Also, they can't normally occur together * with an out-of-memory condition, and even if that should happen the condition * will be rediscovered before executing any more code. */ #define VINF_EM_NO_MEMORY 1114 /** The fatal variant of VINF_EM_NO_MEMORY. */ #define VERR_EM_NO_MEMORY (-1114) /** Indicating that we should reschedule to recompiled execution. * Typically caused by the main execution engine not being capable of executing * code in the current CPU state, or would be doing it too slowly, and we must * fall back to recompiled execution. * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */ #define VINF_EM_RESCHEDULE_REM 1115 /** Indicating that we should reschedule to the main execution engine. * Mainly triggered in recompiled execution mode to switch back to the main * execution engine when the CPU state is compatible with it again (or we're * past the expensive portion of code that is deemed faster to recompile). */ #define VINF_EM_RESCHEDULE_EXEC_ENGINE 1116 /* VINF_EM_RESCHEDULE_RAW was 1117 */ /** Indicating that a rescheduling now is required. Typically caused by * interrupts having changed the EIP. */ #define VINF_EM_RESCHEDULE 1118 /* VINF_EM_RESCHEDULE_PARAV was 1119 */ /** Go back into wait for SIPI mode */ #define VINF_EM_WAIT_SIPI 1120 /** Last scheduling related status code. (inclusive) */ #define VINF_EM_LAST 1120 /** Reason for leaving RC: Guest trap which couldn't be handled in RC. * The trap is generally forwarded to the REM and executed there. */ #define VINF_EM_RAW_GUEST_TRAP 1121 /** Reason for leaving RC: Interrupted by external interrupt. * The interrupt needed to be handled by the host OS. */ #define VINF_EM_RAW_INTERRUPT 1122 /** Reason for leaving RC: Interrupted by external interrupt while in hypervisor * code. The interrupt needed to be handled by the host OS and hypervisor * execution must be resumed. VM state is not complete at this point. */ #define VINF_EM_RAW_INTERRUPT_HYPER 1123 /** Reason for leaving RC: A Ring switch was attempted. * Normal cause of action is to execute this in REM. */ #define VINF_EM_RAW_RING_SWITCH 1124 /** Reason for leaving RC: A Ring switch was attempted using software interrupt. * Normal cause of action is to execute this in REM. */ #define VINF_EM_RAW_RING_SWITCH_INT 1125 /** Reason for leaving RC: A privileged instruction was attempted executed. * Normal cause of action is to execute this in REM. */ #define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126 /** Reason for leaving RZ: Emulate instruction. */ #define VINF_EM_RAW_EMULATE_INSTR 1127 /** Reason for leaving RC: Unhandled TSS write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128 /** Reason for leaving RC: Unhandled LDT write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129 /** Reason for leaving RC: Unhandled IDT write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130 /** Reason for leaving RC: Partly handled GDT write. * Recompiler gets control. */ #define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131 /** Reason for leaving RC: jump inside generated patch jump. * Fatal error. */ #define VERR_EM_RAW_PATCH_CONFLICT (-1133) /** Reason for leaving RZ: Ring-3 operation pending. */ #define VINF_EM_RAW_TO_R3 1135 /** Reason for leaving RZ: Timer pending. */ #define VINF_EM_RAW_TIMER_PENDING 1136 /** Reason for leaving RC: Interrupt pending (guest). */ #define VINF_EM_RAW_INTERRUPT_PENDING 1137 /** Reason for leaving RC: Encountered a stale selector. */ #define VINF_EM_RAW_STALE_SELECTOR 1138 /** Reason for leaving RC: The IRET resuming guest code trapped. */ #define VINF_EM_RAW_IRET_TRAP 1139 /** The interpreter was unable to deal with the instruction at hand. */ #define VERR_EM_INTERPRETER (-1148) /** Internal EM error caused by an unknown warning or informational status code. */ #define VERR_EM_INTERNAL_ERROR (-1149) /** Pending VM request packet. */ #define VINF_EM_PENDING_REQUEST 1150 /** Start instruction stepping (debug only). */ #define VINF_EM_RAW_EMULATE_DBG_STEP 1151 /** Patch TPR access instruction. */ #define VINF_EM_HM_PATCH_TPR_INSTR 1152 /** Unexpected guest mapping conflict detected. */ #define VERR_EM_UNEXPECTED_MAPPING_CONFLICT (-1154) /** Reason for leaving RC: A triple-fault condition. Currently, causes * a guru meditation. */ #define VINF_EM_TRIPLE_FAULT 1155 /** The specified execution engine cannot execute guest code in the current * state. */ #define VERR_EM_CANNOT_EXEC_GUEST (-1156) /** Reason for leaving RC: Inject a TRPM event. */ #define VINF_EM_RAW_INJECT_TRPM_EVENT 1157 /** Guest tried to trigger a CPU hang. The guest is probably up to no good. */ #define VERR_EM_GUEST_CPU_HANG (-1158) /** Reason for leaving RZ: Pending ring-3 IN instruction. */ #define VINF_EM_PENDING_R3_IOPORT_READ 1159 /** Reason for leaving RZ: Pending ring-3 OUT instruction. */ #define VINF_EM_PENDING_R3_IOPORT_WRITE 1160 /** Trick for resuming EMHistoryExec after a VMCPU_FF_IOM is handled. */ #define VINF_EM_RESUME_R3_HISTORY_EXEC 1161 /** Emulate split-lock access on SMP. */ #define VINF_EM_EMULATE_SPLIT_LOCK 1162 /** @} */ /** @name Debugging Facility (DBGF) DBGF Status Codes * @{ */ /** The function called requires the caller to be attached as a * debugger to the VM. */ #define VERR_DBGF_NOT_ATTACHED (-1200) /** Someone (including the caller) was already attached as * debugger to the VM. */ #define VERR_DBGF_ALREADY_ATTACHED (-1201) /** Tried to halt a VM or CPU that was already halted. */ #define VWRN_DBGF_ALREADY_HALTED 1202 /** The DBGF has no more free breakpoint slots. */ #define VERR_DBGF_NO_MORE_BP_SLOTS (-1203) /** The DBGF couldn't find the specified breakpoint. */ #define VERR_DBGF_BP_NOT_FOUND (-1204) /** Attempted to enabled a breakpoint which was already enabled. */ #define VINF_DBGF_BP_ALREADY_ENABLED 1205 /** Attempted to disabled a breakpoint which was already disabled. */ #define VINF_DBGF_BP_ALREADY_DISABLED 1206 /** The breakpoint already exists. */ #define VINF_DBGF_BP_ALREADY_EXIST 1207 /** The byte string was not found. */ #define VERR_DBGF_MEM_NOT_FOUND (-1208) /** The OS was not detected. */ #define VERR_DBGF_OS_NOT_DETCTED (-1209) /** The OS was not detected. */ #define VINF_DBGF_OS_NOT_DETCTED 1209 /** The specified register was not found. */ #define VERR_DBGF_REGISTER_NOT_FOUND (-1210) /** The value was truncated to fit. * For queries this means that the register is wider than the queried value. * For setters this means that the value is wider than the register. */ #define VINF_DBGF_TRUNCATED_REGISTER 1211 /** The value was zero extended to fit. * For queries this means that the register is narrower than the queried value. * For setters this means that the value is narrower than the register. */ #define VINF_DBGF_ZERO_EXTENDED_REGISTER 1212 /** The requested type conversion was not supported. */ #define VERR_DBGF_UNSUPPORTED_CAST (-1213) /** The register is read-only and cannot be modified. */ #define VERR_DBGF_READ_ONLY_REGISTER (-1214) /** Internal processing error \#1 in the DBGF register code. */ #define VERR_DBGF_REG_IPE_1 (-1215) /** Internal processing error \#2 in the DBGF register code. */ #define VERR_DBGF_REG_IPE_2 (-1216) /** Unhandled \#DB in hypervisor code. */ #define VERR_DBGF_HYPER_DB_XCPT (-1217) /** Internal processing error \#1 in the DBGF stack code. */ #define VERR_DBGF_STACK_IPE_1 (-1218) /** Internal processing error \#2 in the DBGF stack code. */ #define VERR_DBGF_STACK_IPE_2 (-1219) /** No trace buffer available, please change the VM config. */ #define VERR_DBGF_NO_TRACE_BUFFER (-1220) /** Internal processing error \#1 in the DBGF event tracing code. */ #define VERR_DBGF_TRACER_IPE_1 (-1221) /** Tried to resume a VM or CPU that is already fully running. */ #define VWRN_DBGF_ALREADY_RUNNING (-1222) /** Internal processing error \#1 in the DBGF core code. */ #define VERR_DBGF_IPE_1 (-1223) /** Returned by a breakpoint callback when guest execution should be suspended * and the VM should be dropped into the debugger. */ #define VINF_DBGF_BP_HALT (1224) /** The breakpoint owner handle is still used by one or more breakpoints. */ #define VERR_DBGF_OWNER_BUSY (-1225) /** Number of tries to add an int3 breakpoint table to the lookup tables reached. */ #define VERR_DBGF_BP_INT3_ADD_TRIES_REACHED (-1226) /** Internal processing error \#1 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_1 (-1227) /** Internal processing error \#2 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_2 (-1228) /** Internal processing error \#3 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_3 (-1229) /** Internal processing error \#4 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_4 (-1230) /** Internal processing error \#5 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_5 (-1231) /** Internal processing error \#6 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_6 (-1232) /** Internal processing error \#7 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_7 (-1233) /** Internal processing error \#8 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_8 (-1234) /** Internal processing error \#9 in the DBGF breakpoint manager code. */ #define VERR_DBGF_BP_IPE_9 (-1235) /** Level 2 lookup failed because the L1 lookup table is corrupted. */ #define VERR_DBGF_BP_L1_LOOKUP_FAILED (-1236) /** Level 2 lookup failed because the L2 lookup table is corrupted. */ #define VERR_DBGF_BP_L2_LOOKUP_FAILED (-1237) /** The DBGF has no more free breakpoint owner handles. */ #define VERR_DBGF_BP_OWNER_NO_MORE_HANDLES (-1238) /** Reason for leaving RZ: Defer the owner callback invocation to Ring-3. */ #define VINF_DBGF_R3_BP_OWNER_DEFER 1239 /** The breakpoint owner callback returned an invalid status code. */ #define VERR_DBGF_BP_OWNER_CALLBACK_WRONG_STATUS (-1240) /** The operation was cancelled. */ #define VERR_DBGF_CANCELLED (-1241) /** @} */ /** @name Patch Manager (PATM) Status Codes * @{ */ /** Non fatal Patch Manager analysis phase warning */ #define VWRN_CONTINUE_ANALYSIS 1400 /** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */ #define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS /** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */ #define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS /** Patch installation refused (patch too complex or unsupported instructions ) */ #define VERR_PATCHING_REFUSED (-1401) /** Unable to find patch */ #define VERR_PATCH_NOT_FOUND (-1402) /** Patch disabled */ #define VERR_PATCH_DISABLED (-1403) /** Patch enabled */ #define VWRN_PATCH_ENABLED 1404 /** Patch was already disabled */ #define VERR_PATCH_ALREADY_DISABLED (-1405) /** Patch was already enabled */ #define VERR_PATCH_ALREADY_ENABLED (-1406) /** Patch was removed. */ #define VWRN_PATCH_REMOVED 1407 /** Reason for leaving RC: \#GP with EIP pointing to patch code. */ #define VINF_PATM_PATCH_TRAP_GP 1408 /** First leave RC code. */ #define VINF_PATM_LEAVE_RC_FIRST VINF_PATM_PATCH_TRAP_GP /** Reason for leaving RC: \#PF with EIP pointing to patch code. */ #define VINF_PATM_PATCH_TRAP_PF 1409 /** Reason for leaving RC: int3 with EIP pointing to patch code. */ #define VINF_PATM_PATCH_INT3 1410 /** Reason for leaving RC: \#PF for monitored patch page. */ #define VINF_PATM_CHECK_PATCH_PAGE 1411 /** Reason for leaving RC: duplicate instruction called at current eip. */ #define VINF_PATM_DUPLICATE_FUNCTION 1412 /** Execute one instruction with the recompiler */ #define VINF_PATCH_EMULATE_INSTR 1413 /** Reason for leaving RC: attempt to patch MMIO write. */ #define VINF_PATM_HC_MMIO_PATCH_WRITE 1414 /** Reason for leaving RC: attempt to patch MMIO read. */ #define VINF_PATM_HC_MMIO_PATCH_READ 1415 /** Reason for leaving RC: pending irq after iret that sets IF. */ #define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416 /** Last leave RC code. */ #define VINF_PATM_LEAVE_RC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET /** No conflicts to resolve */ #define VERR_PATCH_NO_CONFLICT (-1425) /** Detected unsafe code for patching */ #define VERR_PATM_UNSAFE_CODE (-1426) /** Terminate search branch */ #define VWRN_PATCH_END_BRANCH 1427 /** Already patched */ #define VERR_PATM_ALREADY_PATCHED (-1428) /** Spinlock detection failed. */ #define VINF_PATM_SPINLOCK_FAILED (1429) /** Continue execution after patch trap. */ #define VINF_PATCH_CONTINUE (1430) /** The patch manager is not used because we're using HM and VT-x/AMD-V. */ #define VERR_PATM_HM_IPE (-1431) /** Unexpected trap in patch code. */ #define VERR_PATM_IPE_TRAP_IN_PATCH_CODE (-1432) /** @} */ /** @name Code Scanning and Analysis Manager (CSAM) Status Codes * @{ */ /** Trap not handled */ #define VWRN_CSAM_TRAP_NOT_HANDLED 1500 /** Patch installed */ #define VWRN_CSAM_INSTRUCTION_PATCHED 1501 /** Page record not found */ #define VWRN_CSAM_PAGE_NOT_FOUND 1502 /** Reason for leaving RC: CSAM wants perform a task in ring-3. */ #define VINF_CSAM_PENDING_ACTION 1503 /** The CSAM is not used because we're using HM and VT-x/AMD-V. */ #define VERR_CSAM_HM_IPE (-1504) /** @} */ /** @name Page Monitor/Manager (PGM) Status Codes * @{ */ /** Attempt to create a GC mapping which conflicts with an existing mapping. */ #define VERR_PGM_MAPPING_CONFLICT (-1600) /** The physical handler range has no corresponding RAM range. * If this is MMIO, see todo above the return. If not MMIO, then it's * someone else's fault... */ #define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601) /** Attempt to register an access handler for a virtual range of which a part * was already handled. */ #define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602) /** Attempt to register an access handler for a physical range of which a part * was already handled. */ #define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603) /** Invalid page directory specified to PGM. */ #define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604) /** Invalid GC physical address. */ #define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605) /** Invalid GC physical range. Usually used when a specified range crosses * a RAM region boundary. */ #define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606) /** Specified access handler was not found. */ #define VERR_PGM_HANDLER_NOT_FOUND (-1607) /** Attempt to register a RAM range of which parts are already * covered by existing RAM ranges. */ #define VERR_PGM_RAM_CONFLICT (-1608) /** Failed to add new mappings because the current mappings are fixed * in guest os memory. */ #define VERR_PGM_MAPPINGS_FIXED (-1609) /** Failed to fix mappings because of a conflict with the intermediate code. */ #define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610) /** Failed to fix mappings because a mapping rejected the address. */ #define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611) /** Failed to fix mappings because the proposed memory area was to small. */ #define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612) /** Reason for leaving RZ: The urge to syncing CR3. */ #define VINF_PGM_SYNC_CR3 1613 /** Page not marked for dirty bit tracking */ #define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614 /** Page fault caused by dirty bit tracking; corrected */ #define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615 /** Go ahead with the default Read/Write operation. * This is returned by a R3 physical or virtual handler when it wants the * PGMPhys[Read|Write] routine do the reading/writing. */ #define VINF_PGM_HANDLER_DO_DEFAULT 1616 /** The paging mode of the host is not supported yet. */ #define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617) /** The physical guest page is a reserved/MMIO page and does not have any HC * address. */ #define VERR_PGM_PHYS_PAGE_RESERVED (-1618) /** No page directory available for the hypervisor. */ #define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619) /** The returned shadow page is cached. */ #define VINF_PGM_CACHED_PAGE 1622 /** Returned by handler registration, modification and deregistration * when the shadow PTs could be updated because the guest page * aliased or/and mapped by multiple PTs. */ #define VINF_PGM_GCPHYS_ALIASED 1623 /** SyncPage modified the PDE. * This is an internal status code used to communicate back to the \#PF handler * that the PDE was (probably) marked not-present and it should restart the instruction. */ #define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625 /** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */ #define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626) /** Conflict between the core memory and the intermediate paging context, try again. * There are some very special conditions applying to the intermediate paging context * (used during the world switches), and some times we continuously run into these * when asking the host kernel for memory during VM init. Let us know if you run into * this and we'll adjust the code so it tries harder to avoid it. */ #define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627) /** The shadow paging mode is not supported yet. */ #define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628) /** The dynamic mapping cache for physical memory failed. */ #define VERR_PGM_DYNMAP_FAILED (-1629) /** The auto usage cache for the dynamic mapping set is full. */ #define VERR_PGM_DYNMAP_FULL_SET (-1630) /** The initialization of the dynamic mapping cache failed. */ #define VERR_PGM_DYNMAP_SETUP_ERROR (-1631) /** The expanding of the dynamic mapping cache failed. */ #define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632) /** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */ #define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633) /** Catch any access and route it thru PGM. */ #define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634) /** Catch write access and route it thru PGM. */ #define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635 /** Catch write access and route it thru PGM. */ #define VERR_PGM_PHYS_TLB_CATCH_WRITE (-1635) /** No CR3 root shadow page table. */ #define VERR_PGM_NO_CR3_SHADOW_ROOT (-1636) /** Trying to free a page with an invalid Page ID. */ #define VERR_PGM_PHYS_INVALID_PAGE_ID (-1637) /** PGMPhysWrite/Read hit a handler in Ring-0 or raw-mode context. */ #define VERR_PGM_PHYS_WR_HIT_HANDLER (-1638) /** Trying to free a page that isn't RAM. */ #define VERR_PGM_PHYS_NOT_RAM (-1639) /** Not ROM page. */ #define VERR_PGM_PHYS_NOT_ROM (-1640) /** Not MMIO page. */ #define VERR_PGM_PHYS_NOT_MMIO (-1641) /** Not MMIO2 page. */ #define VERR_PGM_PHYS_NOT_MMIO2 (-1642) /** Already aliased to a different page. */ #define VERR_PGM_HANDLER_ALREADY_ALIASED (-1643) /** Already aliased to the same page. */ #define VINF_PGM_HANDLER_ALREADY_ALIASED (1643) /** PGM pool flush pending - return to ring 3. */ #define VINF_PGM_POOL_FLUSH_PENDING (1644) /** Unable to use the range for a large page. */ #define VERR_PGM_INVALID_LARGE_PAGE_RANGE (-1645) /** Don't mess around with ballooned pages. */ #define VERR_PGM_PHYS_PAGE_BALLOONED (-1646) /** Internal processing error \#1 in page access handler code. */ #define VERR_PGM_HANDLER_IPE_1 (-1647) /** pgmPhysPageMapCommon encountered PGMPAGETYPE_MMIO2_ALIAS_MMIO. */ #define VERR_PGM_MAP_MMIO2_ALIAS_MMIO (-1651) /** Guest mappings are disabled. */ #define VERR_PGM_MAPPINGS_DISABLED (-1652) /** No guest mappings when SMP is enabled. */ #define VERR_PGM_MAPPINGS_SMP (-1653) /** Invalid saved page state. */ #define VERR_PGM_INVALID_SAVED_PAGE_STATE (-1654) /** Encountered an unexpected page type in the saved state. */ #define VERR_PGM_LOAD_UNEXPECTED_PAGE_TYPE (-1655) /** Encountered an unexpected page state in the saved state. */ #define VERR_PGM_UNEXPECTED_PAGE_STATE (-1656) /** Couldn't find MMIO2 range from saved state. */ #define VERR_PGM_SAVED_MMIO2_RANGE_NOT_FOUND (-1657) /** Couldn't find MMIO2 page from saved state. */ #define VERR_PGM_SAVED_MMIO2_PAGE_NOT_FOUND (-1658) /** Couldn't find ROM range from saved state. */ #define VERR_PGM_SAVED_ROM_RANGE_NOT_FOUND (-1659) /** Couldn't find ROM page from saved state. */ #define VERR_PGM_SAVED_ROM_PAGE_NOT_FOUND (-1660) /** ROM page mismatch between saved state and the VM. */ #define VERR_PGM_SAVED_ROM_PAGE_PROT (-1661) /** Unknown saved state record. */ #define VERR_PGM_SAVED_REC_TYPE (-1662) /** Internal processing error in the PGM dynmap (r0/rc). */ #define VERR_PGM_DYNMAP_IPE (-1663) /** Internal processing error in the PGM handy page allocator. */ #define VERR_PGM_HANDY_PAGE_IPE (-1664) /** Failed to map the guest PML4. */ #define VERR_PGM_PML4_MAPPING (-1665) /** Failed to obtain a pool page. */ #define VERR_PGM_POOL_GET_PAGE_FAILED (-1666) /** A PGM function was called in a mode where it isn't supposed to be used. */ #define VERR_PGM_NOT_USED_IN_MODE (-1667) /** The CR3 address specified memory we don't know about. */ #define VERR_PGM_INVALID_CR3_ADDR (-1668) /** One or the PDPEs specified memory we don't know about. */ #define VERR_PGM_INVALID_PDPE_ADDR (-1669) /** Internal processing error in the PGM physical handler code. */ #define VERR_PGM_PHYS_HANDLER_IPE (-1670) /** Internal processing error \#1 in the PGM physial page mapping code. */ #define VERR_PGM_PHYS_PAGE_MAP_IPE_1 (-1671) /** Internal processing error \#2 in the PGM physial page mapping code. */ #define VERR_PGM_PHYS_PAGE_MAP_IPE_2 (-1672) /** Internal processing error \#3 in the PGM physial page mapping code. */ #define VERR_PGM_PHYS_PAGE_MAP_IPE_3 (-1673) /** Internal processing error \#4 in the PGM physial page mapping code. */ #define VERR_PGM_PHYS_PAGE_MAP_IPE_4 (-1674) /** Too many loops looking for a page to reuse. */ #define VERR_PGM_POOL_TOO_MANY_LOOPS (-1675) /** Internal processing error related to guest mappings. */ #define VERR_PGM_MAPPING_IPE (-1676) /** An attempt was made to grow an already maxed out page pool. */ #define VERR_PGM_POOL_MAXED_OUT_ALREADY (-1677) /** Internal processing error in the page pool code. */ #define VERR_PGM_POOL_IPE (-1678) /** The write monitor is already engaged. */ #define VERR_PGM_WRITE_MONITOR_ENGAGED (-1679) /** Failed to get a guest page which is expected to be present. */ #define VERR_PGM_PHYS_PAGE_GET_IPE (-1680) /** We were given a NULL pPage parameter. */ #define VERR_PGM_PHYS_NULL_PAGE_PARAM (-1681) /** PCI passthru is not supported by this build. */ #define VERR_PGM_PCI_PASSTHRU_MISCONFIG (-1682) /** Too many MMIO2 ranges. */ #define VERR_PGM_TOO_MANY_MMIO2_RANGES (-1683) /** Internal processing error in the PGM physical page mapping code dealing * with MMIO2 pages. */ #define VERR_PGM_PHYS_PAGE_MAP_MMIO2_IPE (-1684) /** Internal processing error in the PGM physcal page handling code related to * MMIO/MMIO2. */ #define VERR_PGM_PHYS_MMIO_EX_IPE (-1685) /** Mode table internal error. */ #define VERR_PGM_MODE_IPE (-1686) /** Shadow mode 'none' internal error. */ #define VERR_PGM_SHW_NONE_IPE (-1687) /** One or more PAE PDPEs are invalid due to reserved bits being set. */ #define VERR_PGM_PAE_PDPE_RSVD (-1688) /** Attemted illegal operation in simplified memory management mode. */ #define VERR_PGM_NOT_SUPPORTED_FOR_NEM_MODE (-1689) /** @} */ /** @name Memory Monitor (MM) Status Codes * @{ */ /** Attempt to register a RAM range of which parts are already * covered by existing RAM ranges. */ #define VERR_MM_RAM_CONFLICT (-1700) /** Hypervisor memory allocation failed. */ #define VERR_MM_HYPER_NO_MEMORY (-1701) /** A bad trap type ended up in mmGCRamTrap0eHandler. */ #define VERR_MM_BAD_TRAP_TYPE_IPE (-1702) /** @} */ /** @name CPU Monitor (CPUM) Status Codes * @{ */ /** The caller shall raise an \#GP(0) exception. */ #define VERR_CPUM_RAISE_GP_0 (-1750) /** Incompatible CPUM configuration. */ #define VERR_CPUM_INCOMPATIBLE_CONFIG (-1751) /** CPUMR3DisasmInstrCPU unexpectedly failed to determine the hidden * parts of the CS register. */ #define VERR_CPUM_HIDDEN_CS_LOAD_ERROR (-1752) /** Couldn't find the end of CPUID sub-leaves. */ #define VERR_CPUM_TOO_MANY_CPUID_SUBLEAVES (-1753) /** CPUM internal processing error \#1. */ #define VERR_CPUM_IPE_1 (-1754) /** CPUM internal processing error \#2. */ #define VERR_CPUM_IPE_2 (-1755) /** The specified CPU cannot be found in the CPU database. */ #define VERR_CPUM_DB_CPU_NOT_FOUND (-1756) /** Invalid CPUMCPU offset in MSR range. */ #define VERR_CPUM_MSR_BAD_CPUMCPU_OFFSET (-1757) /** Return to ring-3 to read the MSR there. */ #define VINF_CPUM_R3_MSR_READ (1758) /** Return to ring-3 to write the MSR there. */ #define VINF_CPUM_R3_MSR_WRITE (1759) /** Too many CPUID leaves. */ #define VERR_TOO_MANY_CPUID_LEAVES (-1760) /** Invalid config value. */ #define VERR_CPUM_INVALID_CONFIG_VALUE (-1761) /** The loaded XSAVE component mask is not compatible with the host CPU * or/and VM config. */ #define VERR_CPUM_INCOMPATIBLE_XSAVE_COMP_MASK (-1762) /** The loaded XSAVE component mask is not valid. */ #define VERR_CPUM_INVALID_XSAVE_COMP_MASK (-1763) /** The loaded XSAVE header is not valid. */ #define VERR_CPUM_INVALID_XSAVE_HDR (-1764) /** The loaded XCR0 register value is not valid. */ #define VERR_CPUM_INVALID_XCR0 (-1765) /** Indicates that we modified the host CR0 (FPU related). */ #define VINF_CPUM_HOST_CR0_MODIFIED (1766) /** Invalid/unsupported nested hardware virtualization configuration. */ #define VERR_CPUM_INVALID_HWVIRT_CONFIG (-1767) /** Invalid nested hardware virtualization feature combination. */ #define VERR_CPUM_INVALID_HWVIRT_FEAT_COMBO (-1768) /** @} */ /** @name Save State Manager (SSM) Status Codes * @{ */ /** The specified data unit already exist. */ #define VERR_SSM_UNIT_EXISTS (-1800) /** The specified data unit wasn't found. */ #define VERR_SSM_UNIT_NOT_FOUND (-1801) /** The specified data unit wasn't owned by caller. */ #define VERR_SSM_UNIT_NOT_OWNER (-1802) /** General saved state file integrity error. */ #define VERR_SSM_INTEGRITY (-1810) /** The saved state file magic was not recognized. */ #define VERR_SSM_INTEGRITY_MAGIC (-1811) /** The saved state file version is not supported. */ #define VERR_SSM_INTEGRITY_VERSION (-1812) /** The saved state file size didn't match the one in the header. */ #define VERR_SSM_INTEGRITY_SIZE (-1813) /** The CRC of the saved state file did not match. */ #define VERR_SSM_INTEGRITY_CRC (-1814) /** The machine uuid field wasn't null. */ #define VERR_SMM_INTEGRITY_MACHINE (-1815) /** Saved state header integrity error. */ #define VERR_SSM_INTEGRITY_HEADER (-1816) /** Unit header integrity error. */ #define VERR_SSM_INTEGRITY_UNIT (-1817) /** Invalid unit magic (internal data tag). */ #define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1818) /** The file contained a data unit which no-one wants. */ #define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1819) /** Incorrect version numbers in the header. */ #define VERR_SSM_INTEGRITY_VBOX_VERSION (-1820) /** Footer integrity error. */ #define VERR_SSM_INTEGRITY_FOOTER (-1821) /** Record header integrity error. */ #define VERR_SSM_INTEGRITY_REC_HDR (-1822) /** Termination record integrity error. */ #define VERR_SSM_INTEGRITY_REC_TERM (-1823) /** Termination record CRC mismatch. */ #define VERR_SSM_INTEGRITY_REC_TERM_CRC (-1824) /** Decompression integrity error. */ #define VERR_SSM_INTEGRITY_DECOMPRESSION (-1825) /** Saved state directory wintertides error. */ #define VERR_SSM_INTEGRITY_DIR (-1826) /** The saved state directory magic is wrong. */ #define VERR_SSM_INTEGRITY_DIR_MAGIC (-1827) /** A data unit in the saved state file was defined but didn't any * routine for processing it. */ #define VERR_SSM_NO_LOAD_EXEC (-1830) /** A restore routine attempted to load more data then the unit contained. */ #define VERR_SSM_LOADED_TOO_MUCH (-1831) /** Not in the correct state for the attempted operation. */ #define VERR_SSM_INVALID_STATE (-1832) /** Not in the correct state for the attempted operation. */ #define VERR_SSM_LOADED_TOO_LITTLE (-1833) /** Unsupported data unit version. * A SSM user returns this if it doesn't know the u32Version. */ #define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1840) /** The format of a data unit has changed. * A SSM user returns this if it's not able to read the format for * other reasons than u32Version. */ #define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1841) /** The CPUID instruction returns different information when loading than when saved. * Normally caused by hardware changes on the host, but could also be caused by * changes in the BIOS setup. */ #define VERR_SSM_LOAD_CPUID_MISMATCH (-1842) /** The RAM size differs between the saved state and the VM config. */ #define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1843) /** The state doesn't match the VM configuration in one or another way. * (There are certain PCI reconfiguration which the OS could potentially * do which can cause this problem. Check this out when it happens.) */ #define VERR_SSM_LOAD_CONFIG_MISMATCH (-1844) /** The virtual clock frequency differs too much. * The clock source for the virtual time isn't reliable or the code have changed. */ #define VERR_SSM_VIRTUAL_CLOCK_HZ (-1845) /** A timeout occurred while waiting for async IDE operations to finish. */ #define VERR_SSM_IDE_ASYNC_TIMEOUT (-1846) /** One of the structure magics was wrong. */ #define VERR_SSM_STRUCTURE_MAGIC (-1847) /** The data in the saved state doesn't conform to expectations. */ #define VERR_SSM_UNEXPECTED_DATA (-1848) /** Trying to read a 64-bit guest physical address into a 32-bit variable. */ #define VERR_SSM_GCPHYS_OVERFLOW (-1849) /** Trying to read a 64-bit guest virtual address into a 32-bit variable. */ #define VERR_SSM_GCPTR_OVERFLOW (-1850) /** Vote for another pass. */ #define VINF_SSM_VOTE_FOR_ANOTHER_PASS 1851 /** Vote for done tell SSM not to call again until the final pass. */ #define VINF_SSM_VOTE_DONE_DONT_CALL_AGAIN 1852 /** Vote for giving up. */ #define VERR_SSM_VOTE_FOR_GIVING_UP (-1853) /** Don't call again until the final pass. */ #define VINF_SSM_DONT_CALL_AGAIN 1854 /** Giving up a live snapshot/teleportation attempt because of too many * passes. */ #define VERR_SSM_TOO_MANY_PASSES (-1855) /** Giving up a live snapshot/teleportation attempt because the state grew to * big. */ #define VERR_SSM_STATE_GREW_TOO_BIG (-1856) /** Giving up a live snapshot attempt because we're low on disk space. */ #define VERR_SSM_LOW_ON_DISK_SPACE (-1857) /** The operation was cancelled. */ #define VERR_SSM_CANCELLED (-1858) /** Nothing that can be cancelled. */ #define VERR_SSM_NO_PENDING_OPERATION (-1859) /** The operation has already been cancelled. */ #define VERR_SSM_ALREADY_CANCELLED (-1860) /** The machine was powered off while saving. */ #define VERR_SSM_LIVE_POWERED_OFF (-1861) /** The live snapshot/teleportation operation was aborted because of a guru * meditation. */ #define VERR_SSM_LIVE_GURU_MEDITATION (-1862) /** The live snapshot/teleportation operation was aborted because of a fatal * runtime error. */ #define VERR_SSM_LIVE_FATAL_ERROR (-1863) /** The VM was suspended before or while saving, don't resume execution. */ #define VINF_SSM_LIVE_SUSPENDED 1864 /** Complex SSM field fed to SSMR3PutStruct or SSMR3GetStruct. Use the * extended API. */ #define VERR_SSM_FIELD_COMPLEX (-1864) /** Invalid size of a SSM field with the specified transformation. */ #define VERR_SSM_FIELD_INVALID_SIZE (-1865) /** The specified field is outside the structure. */ #define VERR_SSM_FIELD_OUT_OF_BOUNDS (-1866) /** The field does not follow immediately the previous one. */ #define VERR_SSM_FIELD_NOT_CONSECUTIVE (-1867) /** The field contains an invalid callback or transformation index. */ #define VERR_SSM_FIELD_INVALID_CALLBACK (-1868) /** The field contains an invalid padding size. */ #define VERR_SSM_FIELD_INVALID_PADDING_SIZE (-1869) /** The field contains a value that is out of range. */ #define VERR_SSM_FIELD_INVALID_VALUE (-1870) /** Generic stream error. */ #define VERR_SSM_STREAM_ERROR (-1871) /** SSM did a callback for a pass we didn't expect. */ #define VERR_SSM_UNEXPECTED_PASS (-1872) /** Someone is trying to skip backwards in the stream... */ #define VERR_SSM_SKIP_BACKWARDS (-1873) /** Someone is trying to write a memory block which is too big to encode. */ #define VERR_SSM_MEM_TOO_BIG (-1874) /** Encountered an bad (/unknown) record type. */ #define VERR_SSM_BAD_REC_TYPE (-1875) /** Internal processing error \#1 in SSM code. */ #define VERR_SSM_IPE_1 (-1876) /** Internal processing error \#2 in SSM code. */ #define VERR_SSM_IPE_2 (-1877) /** Internal processing error \#3 in SSM code. */ #define VERR_SSM_IPE_3 (-1878) /** A field contained an transformation that should only be used when loading * old states. */ #define VERR_SSM_FIELD_LOAD_ONLY_TRANSFORMATION (-1879) /** Out of range enum value. */ #define VERR_SSM_ENUM_VALUE_OUT_OF_RANGE (-1880) /** @} */ /** @name Virtual Machine (VM) Status Codes * @{ */ /** The specified at reset handler wasn't found. */ #define VERR_VM_ATRESET_NOT_FOUND (-1900) /** Invalid VM request type. * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For * all the other occurrences it means indicates corruption, broken logic, or stupid * interface user. */ #define VERR_VM_REQUEST_INVALID_TYPE (-1901) /** Invalid VM request state. * The state of the request packet was not the expected and accepted one(s). Either * the interface user screwed up, or we've got corruption/broken logic. */ #define VERR_VM_REQUEST_STATE (-1902) /** Invalid VM request packet. * One or more of the VM controlled packet members didn't contain the correct * values. Some thing's broken. */ #define VERR_VM_REQUEST_INVALID_PACKAGE (-1903) /** The status field has not been updated yet as the request is still * pending completion. Someone queried the iStatus field before the request * has been fully processed. */ #define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904) /** The request has been freed, don't read the status now. * Someone is reading the iStatus field of a freed request packet. */ #define VERR_VM_REQUEST_STATUS_FREED (-1905) /** A VM api requiring EMT was called from another thread. * Use the VMR3ReqCall() apis to call it! */ #define VERR_VM_THREAD_NOT_EMT (-1906) /** The VM state was invalid for the requested operation. * Go check the 'VM Statechart Diagram.gif'. */ #define VERR_VM_INVALID_VM_STATE (-1907) /** The support driver is not installed. * On linux, open returned ENOENT. */ #define VERR_VM_DRIVER_NOT_INSTALLED (-1908) /** The support driver is not accessible. * On linux, open returned EPERM. */ #define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909) /** Was not able to load the support driver. * On linux, open returned ENODEV. */ #define VERR_VM_DRIVER_LOAD_ERROR (-1910) /** Was not able to open the support driver. * Generic open error used when none of the other ones fit. */ #define VERR_VM_DRIVER_OPEN_ERROR (-1911) /** The installed support driver doesn't match the version of the user. */ #define VERR_VM_DRIVER_VERSION_MISMATCH (-1912) /** Saving the VM state is temporarily not allowed. Try again later. */ #define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913) /** An EMT called an API which cannot be called on such a thread. */ #define VERR_VM_THREAD_IS_EMT (-1914) /** Encountered an unexpected VM state. */ #define VERR_VM_UNEXPECTED_VM_STATE (-1915) /** Unexpected unstable VM state. */ #define VERR_VM_UNEXPECTED_UNSTABLE_STATE (-1916) /** Too many arguments passed to a VM request / request corruption. */ #define VERR_VM_REQUEST_TOO_MANY_ARGS_IPE (-1917) /** Fatal EMT wait error. */ #define VERR_VM_FATAL_WAIT_ERROR (-1918) /** The VM request was killed at VM termination. */ #define VERR_VM_REQUEST_KILLED (-1919) /** @} */ /** @name VBox Remote Desktop Protocol (VRDP) Status Codes * @{ */ /** Successful completion of operation (mapped to generic iprt status code). */ #define VINF_VRDP_SUCCESS VINF_SUCCESS /** VRDP transport operation timed out (mapped to generic iprt status code). */ #define VERR_VRDP_TIMEOUT VERR_TIMEOUT /** Unsupported ISO protocol feature */ #define VERR_VRDP_ISO_UNSUPPORTED (-2000) /** Security (en/decryption) engine error */ #define VERR_VRDP_SEC_ENGINE_FAIL (-2001) /** VRDP protocol violation */ #define VERR_VRDP_PROTOCOL_ERROR (-2002) /** Unsupported VRDP protocol feature */ #define VERR_VRDP_NOT_SUPPORTED (-2003) /** VRDP protocol violation, client sends less data than expected */ #define VERR_VRDP_INSUFFICIENT_DATA (-2004) /** Internal error, VRDP packet is in wrong operation mode */ #define VERR_VRDP_INVALID_MODE (-2005) /** Memory allocation failed */ #define VERR_VRDP_NO_MEMORY (-2006) /** Client has been rejected */ #define VERR_VRDP_ACCESS_DENIED (-2007) /** VRPD receives a packet that is not supported */ #define VWRN_VRDP_PDU_NOT_SUPPORTED 2008 /** VRDP script allowed the packet to be processed further */ #define VINF_VRDP_PROCESS_PDU 2009 /** VRDP script has completed its task */ #define VINF_VRDP_OPERATION_COMPLETED 2010 /** VRDP thread has started OK and will run */ #define VINF_VRDP_THREAD_STARTED 2011 /** Framebuffer is resized, terminate send bitmap procedure */ #define VINF_VRDP_RESIZE_REQUESTED 2012 /** Output can be enabled for the client. */ #define VINF_VRDP_OUTPUT_ENABLE 2013 /** @} */ /** @name Configuration Manager (CFGM) Status Codes * @{ */ /** The integer value was too big for the requested representation. */ #define VERR_CFGM_INTEGER_TOO_BIG (-2100) /** Child node was not found. */ #define VERR_CFGM_CHILD_NOT_FOUND (-2101) /** Path to child node was invalid (i.e. empty). */ #define VERR_CFGM_INVALID_CHILD_PATH (-2102) /** Value not found. */ #define VERR_CFGM_VALUE_NOT_FOUND (-2103) /** No parent node specified. */ #define VERR_CFGM_NO_PARENT (-2104) /** No node was specified. */ #define VERR_CFGM_NO_NODE (-2105) /** The value is not an integer. */ #define VERR_CFGM_NOT_INTEGER (-2106) /** The value is not a zero terminated character string. */ #define VERR_CFGM_NOT_STRING (-2107) /** The value is not a byte string. */ #define VERR_CFGM_NOT_BYTES (-2108) /** The specified string / bytes buffer was to small. Specify a larger one and retry. */ #define VERR_CFGM_NOT_ENOUGH_SPACE (-2109) /** The value is not a zero terminated password string. */ #define VERR_CFGM_NOT_PASSWORD (-2110) /** The path of a new node contained slashes or was empty. */ #define VERR_CFGM_INVALID_NODE_PATH (-2160) /** A new node couldn't be inserted because one with the same name exists. */ #define VERR_CFGM_NODE_EXISTS (-2161) /** A new leaf couldn't be inserted because one with the same name exists. */ #define VERR_CFGM_LEAF_EXISTS (-2162) /** An unknown config value was encountered. */ #define VERR_CFGM_CONFIG_UNKNOWN_VALUE (-2163) /** An unknown config node (key) was encountered. */ #define VERR_CFGM_CONFIG_UNKNOWN_NODE (-2164) /** Internal processing error \#1 in CFGM. */ #define VERR_CFGM_IPE_1 (-2165) /** @} */ /** @name Time Manager (TM) Status Codes * @{ */ /** The loaded timer state was incorrect. */ #define VERR_TM_LOAD_STATE (-2200) /** The timer was not in the correct state for the request operation. */ #define VERR_TM_INVALID_STATE (-2201) /** The timer was in a unknown state. Corruption or stupid coding error. */ #define VERR_TM_UNKNOWN_STATE (-2202) /** The timer was stuck in an unstable state until we grew impatient and returned. */ #define VERR_TM_UNSTABLE_STATE (-2203) /** TM requires GIP. */ #define VERR_TM_GIP_REQUIRED (-2204) /** TM does not support the GIP version. */ #define VERR_TM_GIP_VERSION (-2205) /** The GIP update interval is too large. */ #define VERR_TM_GIP_UPDATE_INTERVAL_TOO_BIG (-2206) /** The timer has a bad clock enum value, probably corruption. */ #define VERR_TM_TIMER_BAD_CLOCK (-2207) /** The timer failed to reach a stable state. */ #define VERR_TM_TIMER_UNSTABLE_STATE (-2208) /** Attempt to resume a running TSC. */ #define VERR_TM_TSC_ALREADY_TICKING (-2209) /** Attempt to pause a paused TSC. */ #define VERR_TM_TSC_ALREADY_PAUSED (-2210) /** Invalid value for cVirtualTicking. */ #define VERR_TM_VIRTUAL_TICKING_IPE (-2211) /** Max timer limit reached. */ #define VERR_TM_TOO_MANY_TIMERS (-2212) /** Invalid timer queue number. */ #define VERR_TM_INVALID_TIMER_QUEUE (-2213) /** The timer queue is not longer allowed to grow. */ #define VERR_TM_TIMER_QUEUE_CANNOT_GROW (-2214) /** TM internal processing error \#1. */ #define VERR_TM_IPE_1 (-2291) /** TM internal processing error \#2. */ #define VERR_TM_IPE_2 (-2292) /** TM internal processing error \#3. */ #define VERR_TM_IPE_3 (-2293) /** TM internal processing error \#4. */ #define VERR_TM_IPE_4 (-2294) /** TM internal processing error \#5. */ #define VERR_TM_IPE_5 (-2295) /** TM internal processing error \#6. */ #define VERR_TM_IPE_6 (-2296) /** TM internal processing error \#7. */ #define VERR_TM_IPE_7 (-2297) /** TM internal processing error \#8. */ #define VERR_TM_IPE_8 (-2298) /** TM internal processing error \#9. */ #define VERR_TM_IPE_9 (-2299) /** @} */ /** @name Trap Manager / Monitor (TRPM) Status Codes * @{ */ /** No active trap. Cannot query or reset a non-existing trap. */ #define VERR_TRPM_NO_ACTIVE_TRAP (-2400) /** Active trap. Cannot assert a new trap when one is already active. */ #define VERR_TRPM_ACTIVE_TRAP (-2401) /** Reason for leaving RC: Guest tried to write to our IDT - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the idtr register. */ #define VERR_TRPM_SHADOW_IDT_WRITE (-2402) /** Reason for leaving RC: Fatal trap in hypervisor. */ #define VERR_TRPM_DONT_PANIC (-2403) /** Reason for leaving RC: Double Fault. */ #define VERR_TRPM_PANIC (-2404) /** Bad TRPM_TRAP_IN_OP. */ #define VERR_TRPM_BAD_TRAP_IN_OP (-2405) /** Internal processing error \#1 in TRPM. */ #define VERR_TRPM_IPE_1 (-2406) /** Internal processing error \#2 in TRPM. */ #define VERR_TRPM_IPE_2 (-2407) /** Internal processing error \#3 in TRPM. */ #define VERR_TRPM_IPE_3 (-2408) /** Got into a part of TRPM that is not used when HM (VT-x/AMD-V) is enabled. */ #define VERR_TRPM_HM_IPE (-2409) /** @} */ /** @name Selector Manager / Monitor (SELM) Status Code * @{ */ /** Reason for leaving RC: Guest tried to write to our GDT - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the gdtr register. */ #define VERR_SELM_SHADOW_GDT_WRITE (-2500) /** Reason for leaving RC: Guest tried to write to our LDT - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the ldtr register. */ #define VERR_SELM_SHADOW_LDT_WRITE (-2501) /** Reason for leaving RC: Guest tried to write to our TSS - fatal. * The VM will be terminated assuming the worst, i.e. that the * guest has read the ltr register. */ #define VERR_SELM_SHADOW_TSS_WRITE (-2502) /** Reason for leaving RC: Sync the GDT table to solve a conflict. */ #define VINF_SELM_SYNC_GDT 2503 /** No valid TSS present. */ #define VERR_SELM_NO_TSS (-2504) /** Invalid guest LDT selector. */ #define VERR_SELM_INVALID_LDT (-2505) /** The guest LDT selector is out of bounds. */ #define VERR_SELM_LDT_OUT_OF_BOUNDS (-2506) /** Unknown error while reading the guest GDT during shadow table updating. */ #define VERR_SELM_GDT_READ_ERROR (-2507) /** The guest GDT so full that we cannot find free space for our own * selectors. */ #define VERR_SELM_GDT_TOO_FULL (-2508) /** Got into a part of SELM that is not used when HM (VT-x/AMD-V) is enabled. */ #define VERR_SELM_HM_IPE (-2509) /** @} */ /** @name I/O Manager / Monitor (IOM) Status Code * @{ */ /** The specified I/O port range was invalid. * It was either empty or it was out of bounds. */ #define VERR_IOM_INVALID_IOPORT_RANGE (-2600) /** The specified R0 or RC I/O port range didn't have a corresponding R3 range. * IOMR3IOPortRegisterR3() must be called first. */ #define VERR_IOM_NO_R3_IOPORT_RANGE (-2601) /** The specified I/O port range intruded on an existing range. There is * a I/O port conflict between two device, or a device tried to register * the same range twice. */ #define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602) /** The I/O port range specified for removal wasn't found or it wasn't contiguous. */ #define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603) /** The specified I/O port range was owned by some other device(s). Both registration * and deregistration, but in the first case only RC and R0 ranges. */ #define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604) /** The specified MMIO range was invalid. * It was either empty or it was out of bounds. */ #define VERR_IOM_INVALID_MMIO_RANGE (-2605) /** The specified R0 or RC MMIO range didn't have a corresponding R3 range. * IOMR3MMIORegisterR3() must be called first. */ #define VERR_IOM_NO_R3_MMIO_RANGE (-2606) /** The specified MMIO range was owned by some other device(s). Both registration * and deregistration, but in the first case only RC and R0 ranges. */ #define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607) /** The specified MMIO range intruded on an existing range. There is * a MMIO conflict between two device, or a device tried to register * the same range twice. */ #define VERR_IOM_MMIO_RANGE_CONFLICT (-2608) /** The MMIO range specified for removal was not found. */ #define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609) /** The MMIO range specified for removal was invalid. The range didn't match * quite match a set of existing ranges. It's not possible to remove parts of * a MMIO range, only one or more full ranges. */ #define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610) /** An invalid I/O port size was specified for a read or write operation. */ #define VERR_IOM_INVALID_IOPORT_SIZE (-2611) /** The MMIO handler was called for a bogus address! Internal error! */ #define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612) /** The MMIO handler experienced a problem with the disassembler. */ #define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613) /** The port being read was not present(/unused) and IOM shall return ~0 according to size. */ #define VERR_IOM_IOPORT_UNUSED (-2614) /** Unused MMIO register read, fill with 00. */ #define VINF_IOM_MMIO_UNUSED_00 2615 /** Unused MMIO register read, fill with FF. */ #define VINF_IOM_MMIO_UNUSED_FF 2616 /** Reason for leaving RZ: I/O port read. */ #define VINF_IOM_R3_IOPORT_READ 2620 /** Reason for leaving RZ: I/O port write. */ #define VINF_IOM_R3_IOPORT_WRITE 2621 /** Reason for leaving RZ: Pending I/O port write. Since there is also * VMCPU_FF_IOM for this condition, it's ok to drop this status code for * some other VINF_EM_XXX statuses. */ #define VINF_IOM_R3_IOPORT_COMMIT_WRITE 2622 /** Reason for leaving RZ: MMIO read. */ #define VINF_IOM_R3_MMIO_READ 2623 /** Reason for leaving RZ: MMIO write. */ #define VINF_IOM_R3_MMIO_WRITE 2624 /** Reason for leaving RZ: MMIO read/write. */ #define VINF_IOM_R3_MMIO_READ_WRITE 2625 /** Reason for leaving RZ: Pending MMIO write. Since there is also * VMCPU_FF_IOM for this condition, it's ok to drop this status code for * some other VINF_EM_XXX statuses. */ #define VINF_IOM_R3_MMIO_COMMIT_WRITE 2626 /** IOMGCIOPortHandler was given an unexpected opcode. */ #define VERR_IOM_IOPORT_UNKNOWN_OPCODE (-2630) /** Internal processing error \#1 in the I/O port code. */ #define VERR_IOM_IOPORT_IPE_1 (-2631) /** Internal processing error \#2 in the I/O port code. */ #define VERR_IOM_IOPORT_IPE_2 (-2632) /** Internal processing error \#3 in the I/O port code. */ #define VERR_IOM_IOPORT_IPE_3 (-2633) /** Internal processing error \#1 in the MMIO code. */ #define VERR_IOM_MMIO_IPE_1 (-2634) /** Internal processing error \#2 in the MMIO code. */ #define VERR_IOM_MMIO_IPE_2 (-2635) /** Internal processing error \#3 in the MMIO code. */ #define VERR_IOM_MMIO_IPE_3 (-2636) /** Got into a part of IOM that is not used when HM (VT-x/AMD-V) is enabled. */ #define VERR_IOM_HM_IPE (-2637) /** Internal processing error while merging status codes. */ #define VERR_IOM_FF_STATUS_IPE (-2638) /** Too many I/O port registrations. */ #define VERR_IOM_TOO_MANY_IOPORT_REGISTRATIONS (-2650) /** Invalid I/O port handle. */ #define VERR_IOM_INVALID_IOPORT_HANDLE (-2651) /** I/O ports are already mapped. */ #define VERR_IOM_IOPORTS_ALREADY_MAPPED (-2652) /** I/O ports are not mapped. */ #define VERR_IOM_IOPORTS_NOT_MAPPED (-2653) /** Too many MMIO registrations. */ #define VERR_IOM_TOO_MANY_MMIO_REGISTRATIONS (-2660) /** Invalid MMIO handle. */ #define VERR_IOM_INVALID_MMIO_HANDLE (-2661) /** MMIO region is already mapped. */ #define VERR_IOM_MMIO_REGION_ALREADY_MAPPED (-2662) /** MMIO region is not mapped. */ #define VERR_IOM_MMIO_REGION_NOT_MAPPED (-2663) /** @} */ /** @name Virtual Machine Monitor (VMM) Status Codes * @{ */ /** Reason for leaving R0: Hit a ring-0 assertion on EMT. */ #define VERR_VMM_RING0_ASSERTION (-2701) /** The hyper CR3 differs between PGM and CPUM. */ #define VERR_VMM_HYPER_CR3_MISMATCH (-2702) /** Reason for leaving RZ: Illegal call to ring-3. */ #define VERR_VMM_RING3_CALL_DISABLED (-2703) /** The VMMR0.r0 module version does not match VBoxVMM.dll/so/dylib. * If you just upgraded VirtualBox, please terminate all VMs and make sure * that neither VBoxNetDHCP nor VBoxNetNAT is running. Then try again. * If this error persists, try re-installing VirtualBox. */ #define VERR_VMM_R0_VERSION_MISMATCH (-2704) /** The VMMRC.rc module version does not match VBoxVMM.dll/so/dylib. * Re-install if you are a user. Developers should make sure the build is * complete or try with a clean build. */ #define VERR_VMM_RC_VERSION_MISMATCH (-2705) /** VMM long jump error. */ #define VERR_VMM_LONG_JMP_ERROR (-2709) /** Reason for leaving RC: Caller the tracer in ring-0. */ #define VINF_VMM_CALL_TRACER (2712) /** Internal processing error \#1 in the switcher code. */ #define VERR_VMM_SWITCHER_IPE_1 (-2713) /** Reason for leaving RZ: Unknown call to ring-3. */ #define VINF_VMM_UNKNOWN_RING3_CALL (2714) /** Attempted to use stub switcher. */ #define VERR_VMM_SWITCHER_STUB (-2715) /** HM returned in the wrong state. */ #define VERR_VMM_WRONG_HM_VMCPU_STATE (-2716) /** SMAP enabled, but the AC flag was found to be clear - check the kernel * log for details. */ #define VERR_VMM_SMAP_BUT_AC_CLEAR (-2717) /** NEM returned in the wrong state. */ #define VERR_VMM_WRONG_NEM_VMCPU_STATE (-2718) /** Got back from vmmR0CallRing3SetJmp with the context hook still enabled. */ #define VERR_VMM_CONTEXT_HOOK_STILL_ENABLED (-2719) /** Cannot block in ring-0. */ #define VERR_VMM_CANNOT_BLOCK (-2720) /** @} */ /** @name Pluggable Device and Driver Manager (PDM) Status Codes * @{ */ /** An invalid LUN specification was given. */ #define VERR_PDM_NO_SUCH_LUN (-2800) /** A device encountered an unknown configuration value. * This means that the device is potentially misconfigured and the device * construction or unit attachment failed because of this. */ #define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801) /** The above driver doesn't export a interface required by a driver being * attached to it. Typical misconfiguration problem. */ #define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802) /** The below driver doesn't export a interface required by the drive * having attached it. Typical misconfiguration problem. */ #define VERR_PDM_MISSING_INTERFACE_BELOW (-2803) /** A device didn't find a required interface with an attached driver. * Typical misconfiguration problem. */ #define VERR_PDM_MISSING_INTERFACE (-2804) /** A driver encountered an unknown configuration value. * This means that the driver is potentially misconfigured and the driver * construction failed because of this. */ #define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805) /** The PCI bus assigned to a device didn't have room for it. * Either too many devices are configured on the same PCI bus, or there are * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */ #define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806) /** A queue is out of free items, the queueing operation failed. */ #define VERR_PDM_NO_QUEUE_ITEMS (-2807) /** Not possible to attach further drivers to the driver. * A driver which doesn't support attachments (below of course) will * return this status code if it found that further drivers were configured * to be attached to it. */ #define VERR_PDM_DRVINS_NO_ATTACH (-2808) /** Not possible to attach drivers to the device. * A device which doesn't support attachments (below of course) will * return this status code if it found that drivers were configured * to be attached to it. */ #define VERR_PDM_DEVINS_NO_ATTACH (-2809) /** No attached driver. * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return * this error when no driver was configured to be attached. */ #define VERR_PDM_NO_ATTACHED_DRIVER (-2810) /** The media geometry hasn't been set yet, so it cannot be obtained. * The caller should then calculate the geometry from the media size. */ #define VERR_PDM_GEOMETRY_NOT_SET (-2811) /** The media translation hasn't been set yet, so it cannot be obtained. * The caller should then guess the translation. */ #define VERR_PDM_TRANSLATION_NOT_SET (-2812) /** The media is not mounted, operation requires a mounted media. */ #define VERR_PDM_MEDIA_NOT_MOUNTED (-2813) /** Mount failed because a media was already mounted. Unmount the media * and retry the mount. */ #define VERR_PDM_MEDIA_MOUNTED (-2814) /** The media is locked and cannot be unmounted. */ #define VERR_PDM_MEDIA_LOCKED (-2815) /** No 'Type' attribute in the DrvBlock configuration. * Misconfiguration. */ #define VERR_PDM_BLOCK_NO_TYPE (-2816) /** The 'Type' attribute in the DrvBlock configuration had an unknown value. * Misconfiguration. */ #define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817) /** The 'Translation' attribute in the DrvBlock configuration had an unknown value. * Misconfiguration. */ #define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818) /** The block driver type wasn't supported. * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */ #define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819) /** A attach or prepare mount call failed because the driver already * had a driver attached. */ #define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820) /** An attempt on detaching a driver without anyone actually being attached, or * performing any other operation on an attached driver. */ #define VERR_PDM_NO_DRIVER_ATTACHED (-2821) /** The attached driver configuration is missing the 'Driver' attribute. */ #define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822) /** The configured driver wasn't found. * Either the necessary driver modules wasn't loaded, the name was * misspelled, or it was a misconfiguration. */ #define VERR_PDM_DRIVER_NOT_FOUND (-2823) /** The Ring-3 module was already loaded. */ #define VINF_PDM_ALREADY_LOADED (2824) /** The name of the module clashed with an existing module. */ #define VERR_PDM_MODULE_NAME_CLASH (-2825) /** Couldn't find any export for registration of drivers/devices. */ #define VERR_PDM_NO_REGISTRATION_EXPORT (-2826) /** A module name is too long. */ #define VERR_PDM_MODULE_NAME_TOO_LONG (-2827) /** Driver name clash. Another driver with the same name as the * one being registered exists. */ #define VERR_PDM_DRIVER_NAME_CLASH (-2828) /** The version of the driver registration structure is unknown * to this VBox version. Either mixing incompatible versions or * the structure isn't correctly initialized. */ #define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829) /** Invalid entry in the driver registration structure. */ #define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830) /** Invalid host bit mask. */ #define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831) /** Not possible to detach a driver because the above driver/device * doesn't support it. The above entity doesn't implement the pfnDetach call. */ #define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832) /** No PCI Bus is available to register the device with. This is usually a * misconfiguration or in rare cases a buggy pci device. */ #define VERR_PDM_NO_PCI_BUS (-2833) /** The device is not a registered PCI device and thus cannot * perform any PCI operations. The device forgot to register it self. */ #define VERR_PDM_NOT_PCI_DEVICE (-2834) /** The version of the device registration structure is unknown * to this VBox version. Either mixing incompatible versions or * the structure isn't correctly initialized. */ #define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835) /** Invalid entry in the device registration structure. */ #define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836) /** Invalid host bit mask. */ #define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837) /** The guest bit mask didn't match the guest being loaded. */ #define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838) /** Device name clash. Another device with the same name as the * one being registered exists. */ #define VERR_PDM_DEVICE_NAME_CLASH (-2839) /** The device wasn't found. There was no registered device * by that name. */ #define VERR_PDM_DEVICE_NOT_FOUND (-2840) /** The device instance was not found. */ #define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841) /** The device instance have no base interface. */ #define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842) /** The device instance have no such logical unit. */ #define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843) /** The driver instance could not be found. */ #define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844) /** Logical Unit was not found. */ #define VERR_PDM_LUN_NOT_FOUND (-2845) /** The Logical Unit was found, but it had no driver attached to it. */ #define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846) /** The Logical Unit was found, but it had no driver attached to it. */ #define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846 /** No PIC device instance is registered with the current VM and thus * the PIC operation cannot be performed. */ #define VERR_PDM_NO_PIC_INSTANCE (-2847) /** No APIC device instance is registered with the current VM and thus * the APIC operation cannot be performed. */ #define VERR_PDM_NO_APIC_INSTANCE (-2848) /** No DMAC device instance is registered with the current VM and thus * the DMA operation cannot be performed. */ #define VERR_PDM_NO_DMAC_INSTANCE (-2849) /** No RTC device instance is registered with the current VM and thus * the RTC or CMOS operation cannot be performed. */ #define VERR_PDM_NO_RTC_INSTANCE (-2850) /** Unable to open the host interface due to a sharing violation . */ #define VERR_PDM_HIF_SHARING_VIOLATION (-2851) /** Unable to open the host interface. */ #define VERR_PDM_HIF_OPEN_FAILED (-2852) /** The device doesn't support runtime driver attaching. * The PDMDEVREG::pfnAttach callback function is NULL. */ #define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853) /** The driver doesn't support runtime driver attaching. * The PDMDRVREG::pfnAttach callback function is NULL. */ #define VERR_PDM_DRIVER_NO_RT_ATTACH (-2854) /** Invalid host interface version. */ #define VERR_PDM_HIF_INVALID_VERSION (-2855) /** The version of the USB device registration structure is unknown * to this VBox version. Either mixing incompatible versions or * the structure isn't correctly initialized. */ #define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856) /** Invalid entry in the device registration structure. */ #define VERR_PDM_INVALID_USB_REGISTRATION (-2857) /** Driver name clash. Another driver with the same name as the * one being registered exists. */ #define VERR_PDM_USB_NAME_CLASH (-2858) /** The USB hub is already registered. */ #define VERR_PDM_USB_HUB_EXISTS (-2859) /** Couldn't find any USB hubs to attach the device to. */ #define VERR_PDM_NO_USB_HUBS (-2860) /** Couldn't find any free USB ports to attach the device to. */ #define VERR_PDM_NO_USB_PORTS (-2861) /** Couldn't find the USB Proxy device. Using OSE? */ #define VERR_PDM_NO_USBPROXY (-2862) /** The async completion template is still used. */ #define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863) /** The async completion task is already suspended. */ #define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864) /** The async completion task is not suspended. */ #define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865) /** The driver properties were invalid, and as a consequence construction * failed. Caused my unusable media or similar problems. */ #define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866) /** Too many instances of a device. */ #define VERR_PDM_TOO_MANY_DEVICE_INSTANCES (-2867) /** Too many instances of a driver. */ #define VERR_PDM_TOO_MANY_DRIVER_INSTANCES (-2868) /** Too many instances of a usb device. */ #define VERR_PDM_TOO_MANY_USB_DEVICE_INSTANCES (-2869) /** The device instance structure version has changed. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_DEVINS_VERSION_MISMATCH (-2870) /** The device helper structure version has changed. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_DEVHLP_VERSION_MISMATCH (-2871) /** The USB device instance structure version has changed. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_USBINS_VERSION_MISMATCH (-2872) /** The USB device helper structure version has changed. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_USBHLPR3_VERSION_MISMATCH (-2873) /** The driver instance structure version has changed. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_DRVINS_VERSION_MISMATCH (-2874) /** The driver helper structure version has changed. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_DRVHLPR3_VERSION_MISMATCH (-2875) /** Generic device structure version mismatch. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_DEVICE_VERSION_MISMATCH (-2876) /** Generic USB device structure version mismatch. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_USBDEV_VERSION_MISMATCH (-2877) /** Generic driver structure version mismatch. * * If you have upgraded VirtualBox recently, please make sure you have * terminated all VMs and upgraded any extension packs. If this error * persists, try re-installing VirtualBox. */ #define VERR_PDM_DRIVER_VERSION_MISMATCH (-2878) /** PDMVMMDevHeapR3ToGCPhys failure. */ #define VERR_PDM_DEV_HEAP_R3_TO_GCPHYS (-2879) /** A legacy device isn't implementing the HPET notification interface. */ #define VERR_PDM_HPET_LEGACY_NOTIFY_MISSING (-2880) /** Internal processing error in the critical section code. */ #define VERR_PDM_CRITSECT_IPE (-2881) /** The critical section being deleted was not found. */ #define VERR_PDM_CRITSECT_NOT_FOUND (-2882) /** A PDMThread API was called by the wrong thread. */ #define VERR_PDM_THREAD_INVALID_CALLER (-2883) /** Internal processing error \#1 in the PDM Thread code. */ #define VERR_PDM_THREAD_IPE_1 (-2884) /** Internal processing error \#2 in the PDM Thread code. */ #define VERR_PDM_THREAD_IPE_2 (-2885) /** Only one PCI function is supported per PDM device. */ #define VERR_PDM_ONE_PCI_FUNCTION_PER_DEVICE (-2886) /** Bad PCI configuration. */ #define VERR_PDM_BAD_PCI_CONFIG (-2887) /** Internal processing error # in the PDM device code. */ #define VERR_PDM_DEV_IPE_1 (-2888) /** Misconfigured driver chain transformation. */ #define VERR_PDM_MISCONFIGURED_DRV_TRANSFORMATION (-2889) /** The driver is already removed, not more transformations possible (at * present). */ #define VERR_PDM_CANNOT_TRANSFORM_REMOVED_DRIVER (-2890) /** The PCI device isn't configured as a busmaster, physical memory access * rejected. */ #define VERR_PDM_NOT_PCI_BUS_MASTER (-2891) /** Got into a part of PDM that is not used when HM (VT-x/AMD-V) is enabled. */ #define VERR_PDM_HM_IPE (-2892) /** The I/O request was canceled. */ #define VERR_PDM_MEDIAEX_IOREQ_CANCELED (-2893) /** There is not enough room to store the data. */ #define VERR_PDM_MEDIAEX_IOBUF_OVERFLOW (-2894) /** There is not enough data to satisfy the request. */ #define VERR_PDM_MEDIAEX_IOBUF_UNDERRUN (-2895) /** The I/O request ID is already existing. */ #define VERR_PDM_MEDIAEX_IOREQID_CONFLICT (-2896) /** The I/O request ID was not found. */ #define VERR_PDM_MEDIAEX_IOREQID_NOT_FOUND (-2897) /** The I/O request is in progress. */ #define VINF_PDM_MEDIAEX_IOREQ_IN_PROGRESS 2898 /** The I/O request is in an invalid state for this operation. */ #define VERR_PDM_MEDIAEX_IOREQ_INVALID_STATE (-2899) /** Returned by PCI config space callbacks to indicate taking default action. */ #define VINF_PDM_PCI_DO_DEFAULT (7200) /** Failed to abort entering a critical section in ring-0. */ #define VERR_PDM_CRITSECT_ABORT_FAILED (-7201) /** Too many readers on read/write critical section. */ #define VERR_PDM_CRITSECTRW_TOO_MANY_READERS (-7202) /** Too many writes on read/write critical section. */ #define VERR_PDM_CRITSECTRW_TOO_MANY_WRITERS (-7203) /** Too many write or write/read recursions on read/write critical section. */ #define VERR_PDM_CRITSECTRW_TOO_MANY_RECURSIONS (-7204) /** Internal error in read-write critical section. */ #define VERR_PDM_CRITSECTRW_IPE (-7205) /** Misaligned read/write critical section. */ #define VERR_PDM_CRITSECTRW_MISALIGNED (-7206) /** @} */ /** @name Host-Guest Communication Manager (HGCM) Status Codes * @{ */ /** Requested service does not exist. */ #define VERR_HGCM_SERVICE_NOT_FOUND (-2900) /** Service rejected client connection */ #define VINF_HGCM_CLIENT_REJECTED 2901 /** Command address is invalid. */ #define VERR_HGCM_INVALID_CMD_ADDRESS (-2902) /** Service will execute the command in background. */ #define VINF_HGCM_ASYNC_EXECUTE 2903 /** HGCM could not perform requested operation because of an internal error. */ #define VERR_HGCM_INTERNAL (-2904) /** Invalid HGCM client id. */ #define VERR_HGCM_INVALID_CLIENT_ID (-2905) /** The HGCM is saving state. */ #define VINF_HGCM_SAVE_STATE (2906) /** Requested service already exists. */ #define VERR_HGCM_SERVICE_EXISTS (-2907) /** Too many clients for the service. */ #define VERR_HGCM_TOO_MANY_CLIENTS (-2908) /** Too many calls to the service from a client. */ #define VERR_HGCM_TOO_MANY_CLIENT_CALLS (-2909) /** @} */ /** @name Network Address Translation Driver (DrvNAT) Status Codes * @{ */ /** Failed to convert the specified Guest IP to a binary IP address. * Malformed input. */ #define VERR_NAT_REDIR_GUEST_IP (-3001) /** Failed while setting up a redirector rule. * There probably is a conflict between the rule and some existing * service on the computer. */ #define VERR_NAT_REDIR_SETUP (-3002) /** @} */ /** @name HostIF Driver (DrvTUN) Status Codes * @{ */ /** The Host Interface Networking init program failed. */ #define VERR_HOSTIF_INIT_FAILED (-3100) /** The Host Interface Networking device name is too long. */ #define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101) /** The Host Interface Networking name config IOCTL call failed. */ #define VERR_HOSTIF_IOCTL (-3102) /** Failed to make the Host Interface Networking handle non-blocking. */ #define VERR_HOSTIF_BLOCKING (-3103) /** If a Host Interface Networking filehandle was specified it's not allowed to * have any init or term programs. */ #define VERR_HOSTIF_FD_AND_INIT_TERM (-3104) /** The Host Interface Networking terminate program failed. */ #define VERR_HOSTIF_TERM_FAILED (-3105) /** @} */ /** @name VBox HDD Container (VD) Status Codes * @{ */ /** Invalid image type. */ #define VERR_VD_INVALID_TYPE (-3200) /** Operation can't be done in current HDD container state. */ #define VERR_VD_INVALID_STATE (-3201) /** Configuration value not found. */ #define VERR_VD_VALUE_NOT_FOUND (-3202) /** Virtual HDD is not opened. */ #define VERR_VD_NOT_OPENED (-3203) /** Requested image is not opened. */ #define VERR_VD_IMAGE_NOT_FOUND (-3204) /** Image is read-only. */ #define VERR_VD_IMAGE_READ_ONLY (-3205) /** Geometry hasn't been set. */ #define VERR_VD_GEOMETRY_NOT_SET (-3206) /** No data for this block in image. */ #define VERR_VD_BLOCK_FREE (-3207) /** Differencing and parent images can't be used together due to UUID. */ #define VERR_VD_UUID_MISMATCH (-3208) /** Asynchronous I/O request finished. */ #define VINF_VD_ASYNC_IO_FINISHED 3209 /** Asynchronous I/O is not finished yet. */ #define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210) /** The image is too small or too large for this format. */ #define VERR_VD_INVALID_SIZE (-3211) /** Configuration value is unknown. This indicates misconfiguration. */ #define VERR_VD_UNKNOWN_CFG_VALUES (-3212) /** Interface is unknown. This indicates misconfiguration. */ #define VERR_VD_UNKNOWN_INTERFACE (-3213) /** The DEK for disk encryption is missing. */ #define VERR_VD_DEK_MISSING (-3214) /** The provided password to decrypt the DEK was incorrect. */ #define VERR_VD_PASSWORD_INCORRECT (-3215) /** Generic: Invalid image file header. Use this for plugins. */ #define VERR_VD_GEN_INVALID_HEADER (-3220) /** VDI: Invalid image file header. */ #define VERR_VD_VDI_INVALID_HEADER (-3230) /** VDI: Invalid image file header: invalid signature. */ #define VERR_VD_VDI_INVALID_SIGNATURE (-3231) /** VDI: Invalid image file header: invalid version. */ #define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232) /** Comment string is too long. */ #define VERR_VD_VDI_COMMENT_TOO_LONG (-3233) /** VMDK: Invalid image file header. */ #define VERR_VD_VMDK_INVALID_HEADER (-3240) /** VMDK: Invalid image file header: invalid version. */ #define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241) /** VMDK: Image property not found. */ #define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242) /** VMDK: Operation can't be done in current image state. */ #define VERR_VD_VMDK_INVALID_STATE (-3243) /** VMDK: Format is invalid/inconsistent. */ #define VERR_VD_VMDK_INVALID_FORMAT (-3244) /** VMDK: Invalid write position. */ #define VERR_VD_VMDK_INVALID_WRITE (-3245) /** iSCSI: Invalid header, i.e. dummy for validity check. */ #define VERR_VD_ISCSI_INVALID_HEADER (-3250) /** iSCSI: Operation can't be done in current image state. */ #define VERR_VD_ISCSI_INVALID_STATE (-3251) /** iSCSI: Invalid device type (not a disk). */ #define VERR_VD_ISCSI_INVALID_TYPE (-3252) /** iSCSI: Initiator secret not decrypted */ #define VERR_VD_ISCSI_SECRET_ENCRYPTED (-3253) /** VHD: Invalid image file header. */ #define VERR_VD_VHD_INVALID_HEADER (-3260) /** Parallels HDD: Invalid image file header. */ #define VERR_VD_PARALLELS_INVALID_HEADER (-3265) /** DMG: Invalid image file header. */ #define VERR_VD_DMG_INVALID_HEADER (-3267) /** Raw: Invalid image file header. */ #define VERR_VD_RAW_INVALID_HEADER (-3270) /** Raw: Invalid image file type. */ #define VERR_VD_RAW_INVALID_TYPE (-3271) /** The backend needs more metadata before it can continue. */ #define VERR_VD_NOT_ENOUGH_METADATA (-3272) /** Halt the current I/O context until further notification from the backend. */ #define VERR_VD_IOCTX_HALT (-3273) /** The disk has a cache attached already. */ #define VERR_VD_CACHE_ALREADY_EXISTS (-3274) /** There is no cache attached to the disk. */ #define VERR_VD_CACHE_NOT_FOUND (-3275) /** The cache is not up to date with the image. */ #define VERR_VD_CACHE_NOT_UP_TO_DATE (-3276) /** The given range does not meet the required alignment. */ #define VERR_VD_DISCARD_ALIGNMENT_NOT_MET (-3277) /** The discard operation is not supported for this image. */ #define VERR_VD_DISCARD_NOT_SUPPORTED (-3278) /** The image is the correct format but is corrupted. */ #define VERR_VD_IMAGE_CORRUPTED (-3279) /** Repairing the image is not supported. */ #define VERR_VD_IMAGE_REPAIR_NOT_SUPPORTED (-3280) /** Repairing the image is not possible because the corruption is to severe. */ #define VERR_VD_IMAGE_REPAIR_IMPOSSIBLE (-3281) /** Reading from the image was not possible because the offset is out of the image range. * This usually indicates that there is a minor corruption in the image meta data. */ #define VERR_VD_READ_OUT_OF_RANGE (-3282) /** Block read was marked as free in the image and returned as a zero block. */ #define VINF_VD_NEW_ZEROED_BLOCK 3283 /** Unable to parse the XML in DMG file. */ #define VERR_VD_DMG_XML_PARSE_ERROR (-3284) /** Unable to locate a usable DMG file within the XAR archive. */ #define VERR_VD_DMG_NOT_FOUND_INSIDE_XAR (-3285) /** The size of the raw image is not dividable by 512 */ #define VERR_VD_RAW_SIZE_MODULO_512 (-3286) /** The size of the raw image is not dividable by 2048 */ #define VERR_VD_RAW_SIZE_MODULO_2048 (-3287) /** The size of the raw optical image is too small (<= 32K) */ #define VERR_VD_RAW_SIZE_OPTICAL_TOO_SMALL (-3288) /** The size of the raw floppy image is too big (>2.88MB) */ #define VERR_VD_RAW_SIZE_FLOPPY_TOO_BIG (-3289) /** Reducing the size is not supported */ #define VERR_VD_SHRINK_NOT_SUPPORTED (-3290) /** @} */ /** @name VBox Guest Library (VBGL) Status Codes * @{ */ /** Library was not initialized. */ #define VERR_VBGL_NOT_INITIALIZED (-3300) /** Virtual address was not allocated by the library. */ #define VERR_VBGL_INVALID_ADDR (-3301) /** IOCtl to VBoxGuest driver failed. */ #define VERR_VBGL_IOCTL_FAILED (-3302) /** @} */ /** @name VBox USB (VUSB) Status Codes * @{ */ /** No available ports on the hub. * This error is returned when a device is attempted created and/or attached * to a hub which is out of ports. */ #define VERR_VUSB_NO_PORTS (-3400) /** The requested operation cannot be performed on a detached USB device. */ #define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401) /** Failed to allocate memory for a URB. */ #define VERR_VUSB_NO_URB_MEMORY (-3402) /** General failure during URB queuing. * This will go away when the queueing gets proper status code handling. */ #define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403) /** Device creation failed because the USB device name was not found. */ #define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404) /** Not permitted to open the USB device. * The user doesn't have access to the device in the usbfs, check the mount options. */ #define VERR_VUSB_USBFS_PERMISSION (-3405) /** The requested operation cannot be performed because the device * is currently being reset. */ #define VERR_VUSB_DEVICE_IS_RESETTING (-3406) /** The requested operation cannot be performed because the device * is currently suspended. */ #define VERR_VUSB_DEVICE_IS_SUSPENDED (-3407) /** Not permitted to open the USB device. * The user doesn't have access to the device node, check group memberships. */ #define VERR_VUSB_USB_DEVICE_PERMISSION (-3408) /** @} */ /** @name VBox VGA Status Codes * @{ */ /** One of the custom modes was incorrect. * The format or bit count of the custom mode value is invalid. */ #define VERR_VGA_INVALID_CUSTOM_MODE (-3500) /** The display connector is resizing. */ #define VINF_VGA_RESIZE_IN_PROGRESS (3501) /** Unexpected PCI region change during VGA saved state loading. */ #define VERR_VGA_UNEXPECTED_PCI_REGION_LOAD_CHANGE (-3502) /** Unabled to locate or load the OpenGL library. */ #define VERR_VGA_GL_LOAD_FAILURE (-3503) /** Unabled to locate an OpenGL symbol. */ #define VERR_VGA_GL_SYMBOL_NOT_FOUND (-3504) /** @} */ /** @name Internal Networking Status Codes * @{ */ /** The networking interface to filter was not found. */ #define VERR_INTNET_FLT_IF_NOT_FOUND (-3600) /** The networking interface to filter was busy (used by someone). */ #define VERR_INTNET_FLT_IF_BUSY (-3601) /** Failed to create or connect to a networking interface filter. */ #define VERR_INTNET_FLT_IF_FAILED (-3602) /** The network already exists with a different trunk configuration. */ #define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603) /** The network already exists with a different security profile (restricted / public). */ #define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604) /** Failed to create a virtual network interface instance. */ #define VERR_INTNET_FLT_VNIC_CREATE_FAILED (-3605) /** Failed to retrieve a virtual network interface link ID. */ #define VERR_INTNET_FLT_VNIC_LINK_ID_NOT_FOUND (-3606) /** Failed to initialize a virtual network interface instance. */ #define VERR_INTNET_FLT_VNIC_INIT_FAILED (-3607) /** Failed to open a virtual network interface instance. */ #define VERR_INTNET_FLT_VNIC_OPEN_FAILED (-3608) /** Failed to retrieve underlying (lower mac) link. */ #define VERR_INTNET_FLT_LOWER_LINK_INFO_NOT_FOUND (-3609) /** Failed to open underlying link instance. */ #define VERR_INTNET_FLT_LOWER_LINK_OPEN_FAILED (-3610) /** Failed to get underlying link ID. */ #define VERR_INTNET_FLT_LOWER_LINK_ID_NOT_FOUND (-3611) /** @} */ /** @name Support Driver Status Codes * @{ */ /** The component factory was not found. */ #define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700) /** The component factories do not support the requested interface. */ #define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701) /** The service module was not found. */ #define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702) /** The host kernel is too old. */ #define VERR_SUPDRV_KERNEL_TOO_OLD_FOR_VTX (-3703) /** Bad VTG magic value. */ #define VERR_SUPDRV_VTG_MAGIC (-3704) /** Bad VTG bit count value. */ #define VERR_SUPDRV_VTG_BITS (-3705) /** Bad VTG header - misc. */ #define VERR_SUPDRV_VTG_BAD_HDR_MISC (-3706) /** Bad VTG header - offset. */ #define VERR_SUPDRV_VTG_BAD_HDR_OFF (-3707) /** Bad VTG header - offset. */ #define VERR_SUPDRV_VTG_BAD_HDR_PTR (-3708) /** Bad VTG header - to low value. */ #define VERR_SUPDRV_VTG_BAD_HDR_TOO_FEW (-3709) /** Bad VTG header - to high value. */ #define VERR_SUPDRV_VTG_BAD_HDR_TOO_MUCH (-3710) /** Bad VTG header - size value is not a multiple of the structure size. */ #define VERR_SUPDRV_VTG_BAD_HDR_NOT_MULTIPLE (-3711) /** Bad VTG string table offset. */ #define VERR_SUPDRV_VTG_STRTAB_OFF (-3712) /** Bad VTG string. */ #define VERR_SUPDRV_VTG_BAD_STRING (-3713) /** VTG string is too long. */ #define VERR_SUPDRV_VTG_STRING_TOO_LONG (-3714) /** Bad VTG attribute value. */ #define VERR_SUPDRV_VTG_BAD_ATTR (-3715) /** Bad VTG provider descriptor. */ #define VERR_SUPDRV_VTG_BAD_PROVIDER (-3716) /** Bad VTG probe descriptor. */ #define VERR_SUPDRV_VTG_BAD_PROBE (-3717) /** Bad VTG argument list descriptor. */ #define VERR_SUPDRV_VTG_BAD_ARGLIST (-3718) /** Bad VTG probe enabled data. */ #define VERR_SUPDRV_VTG_BAD_PROBE_ENABLED (-3719) /** Bad VTG probe location record. */ #define VERR_SUPDRV_VTG_BAD_PROBE_LOC (-3720) /** The VTG object for the session or image has already been registered. */ #define VERR_SUPDRV_VTG_ALREADY_REGISTERED (-3721) /** A driver may only register one VTG object per session. */ #define VERR_SUPDRV_VTG_ONLY_ONCE_PER_SESSION (-3722) /** A tracer has already been registered. */ #define VERR_SUPDRV_TRACER_ALREADY_REGISTERED (-3723) /** The session has no tracer associated with it. */ #define VERR_SUPDRV_TRACER_NOT_REGISTERED (-3724) /** The tracer has already been opened in this sesssion. */ #define VERR_SUPDRV_TRACER_ALREADY_OPENED (-3725) /** The tracer has not been opened. */ #define VERR_SUPDRV_TRACER_NOT_OPENED (-3726) /** There is no tracer present. */ #define VERR_SUPDRV_TRACER_NOT_PRESENT (-3727) /** The tracer is unloading. */ #define VERR_SUPDRV_TRACER_UNLOADING (-3728) /** Another thread in the session is talking to the tracer. */ #define VERR_SUPDRV_TRACER_SESSION_BUSY (-3729) /** The tracer cannot open it self in the same session. */ #define VERR_SUPDRV_TRACER_CANNOT_OPEN_SELF (-3730) /** Bad argument flags. */ #define VERR_SUPDRV_TRACER_BAD_ARG_FLAGS (-3731) /** The session has reached the max number of (user mode) providers. */ #define VERR_SUPDRV_TRACER_TOO_MANY_PROVIDERS (-3732) /** The tracepoint provider object is too large. */ #define VERR_SUPDRV_TRACER_TOO_LARGE (-3733) /** The probe location array isn't adjacent to the probe enable array. */ #define VERR_SUPDRV_TRACER_UMOD_NOT_ADJACENT (-3734) /** The user mode tracepoint provider has too many probe locations and * probes. */ #define VERR_SUPDRV_TRACER_UMOD_TOO_MANY_PROBES (-3735) /** The user mode tracepoint provider string table is too large. */ #define VERR_SUPDRV_TRACER_UMOD_STRTAB_TOO_BIG (-3736) /** The user mode tracepoint provider string table offset is bad. */ #define VERR_SUPDRV_TRACER_UMOD_STRTAB_OFF_BAD (-3737) /** The VM process was denied access to vboxdrv because someone have managed to * open the process or its main thread with too broad access rights. */ #define VERR_SUPDRV_HARDENING_EVIL_HANDLE (-3738) /** Error opening the ApiPort LPC object. */ #define VERR_SUPDRV_APIPORT_OPEN_ERROR (-3739) /** Error enumerating all processes in the session. */ #define VERR_SUPDRV_SESSION_PROCESS_ENUM_ERROR (-3740) /** The CSRSS instance associated with the client process could not be * located. */ #define VERR_SUPDRV_CSRSS_NOT_FOUND (-3741) /** Type error opening the ApiPort LPC object. */ #define VERR_SUPDRV_APIPORT_OPEN_ERROR_TYPE (-3742) /** Failed to measure the TSC delta between two CPUs. */ #define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED (-3743) /** Failed to calculate the TSC frequency. */ #define VERR_SUPDRV_TSC_FREQ_MEASUREMENT_FAILED (-3744) /** Failed to get the delta-adjusted TSC value. */ #define VERR_SUPDRV_TSC_READ_FAILED (-3745) /** Failed to measure the TSC delta between two CPUs, continue without any * TSC-delta. */ #define VWRN_SUPDRV_TSC_DELTA_MEASUREMENT_FAILED 3746 /** A TSC-delta measurement request is currently being serviced. */ #define VERR_SUPDRV_TSC_DELTA_MEASUREMENT_BUSY (-3747) /** The process trying to open VBoxDrv is not a budding VM process (1). */ #define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_1 (-3748) /** The process trying to open VBoxDrv is not a budding VM process (2). */ #define VERR_SUPDRV_NOT_BUDDING_VM_PROCESS_2 (-3749) /** Raw-mode is unavailable courtesy of Hyper-V. */ #define VERR_SUPDRV_NO_RAW_MODE_HYPER_V_ROOT (-7000) /** @} */ /** @name Support Library Status Codes * @{ */ /** The specified path was not absolute (hardening). */ #define VERR_SUPLIB_PATH_NOT_ABSOLUTE (-3750) /** The specified path was not clean (hardening). */ #define VERR_SUPLIB_PATH_NOT_CLEAN (-3751) /** The specified path is too long (hardening). */ #define VERR_SUPLIB_PATH_TOO_LONG (-3752) /** The specified path is too short (hardening). */ #define VERR_SUPLIB_PATH_TOO_SHORT (-3753) /** The specified path has too many components (hardening). */ #define VERR_SUPLIB_PATH_TOO_MANY_COMPONENTS (-3754) /** The specified path is a root path (hardening). */ #define VERR_SUPLIB_PATH_IS_ROOT (-3755) /** Failed to enumerate directory (hardening). */ #define VERR_SUPLIB_DIR_ENUM_FAILED (-3756) /** Failed to stat a file/dir during enumeration (hardening). */ #define VERR_SUPLIB_STAT_ENUM_FAILED (-3757) /** Failed to stat a file/dir (hardening). */ #define VERR_SUPLIB_STAT_FAILED (-3758) /** Failed to fstat a native handle (hardening). */ #define VERR_SUPLIB_FSTAT_FAILED (-3759) /** Found an illegal symbolic link (hardening). */ #define VERR_SUPLIB_SYMLINKS_ARE_NOT_PERMITTED (-3760) /** Found something which isn't a file nor a directory (hardening). */ #define VERR_SUPLIB_NOT_DIR_NOT_FILE (-3761) /** The specified path is a directory and not a file (hardening). */ #define VERR_SUPLIB_IS_DIRECTORY (-3762) /** The specified path is a file and not a directory (hardening). */ #define VERR_SUPLIB_IS_FILE (-3763) /** The path is not the same object as the native handle (hardening). */ #define VERR_SUPLIB_NOT_SAME_OBJECT (-3764) /** The owner is not root (hardening). */ #define VERR_SUPLIB_OWNER_NOT_ROOT (-3765) /** The group is a non-system group and it has write access (hardening). */ #define VERR_SUPLIB_WRITE_NON_SYS_GROUP (-3766) /** The file or directory is world writable (hardening). */ #define VERR_SUPLIB_WORLD_WRITABLE (-3767) /** The argv[0] of an internal application does not match the executable image * path (hardening). */ #define VERR_SUPLIB_INVALID_ARGV0_INTERNAL (-3768) /** The internal application does not reside in the correct place (hardening). */ #define VERR_SUPLIB_INVALID_INTERNAL_APP_DIR (-3769) /** Unable to establish trusted of VM process (0). */ #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_0 (-3770) /** Unable to establish trusted of VM process (1). */ #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_1 (-3771) /** Unable to establish trusted of VM process (2). */ #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_2 (-3772) /** Unable to establish trusted of VM process (3). */ #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_3 (-3773) /** Unable to establish trusted of VM process (4). */ #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_4 (-3774) /** Unable to establish trusted of VM process (5). */ #define VERR_SUPLIB_NT_PROCESS_UNTRUSTED_5 (-3775) /** Unable to make text memory writeable (hardening). */ #define VERR_SUPLIB_TEXT_NOT_WRITEABLE (-3776) /** Unable to seal text memory again to protect against write access (hardening). */ #define VERR_SUPLIB_TEXT_NOT_SEALED (-3777) /** Unexpected instruction encountered for which there is no patch strategy * implemented (hardening). */ #define VERR_SUPLIB_UNEXPECTED_INSTRUCTION (-3778) /** @} */ /** @name VBox GMM Status Codes * @{ */ /** Unable to allocate more pages from the host system. */ #define VERR_GMM_OUT_OF_MEMORY (-3801) /** Hit the global allocation limit. * If you know there is still sufficient memory available, try raising the limit. */ #define VERR_GMM_HIT_GLOBAL_LIMIT (-3802) /** Hit the a VM account limit. */ #define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803) /** Attempt to free more memory than what was previously allocated. */ #define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804) /** Attempted to report too many pages as deflated. */ #define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805) /** The page to be freed or updated was not found. */ #define VERR_GMM_PAGE_NOT_FOUND (-3806) /** The specified shared page was not actually private. */ #define VERR_GMM_PAGE_NOT_PRIVATE (-3807) /** The specified shared page was not actually shared. */ #define VERR_GMM_PAGE_NOT_SHARED (-3808) /** The page to be freed was already freed. */ #define VERR_GMM_PAGE_ALREADY_FREE (-3809) /** The page to be updated or freed was noted owned by the caller. */ #define VERR_GMM_NOT_PAGE_OWNER (-3810) /** The specified chunk was not found. */ #define VERR_GMM_CHUNK_NOT_FOUND (-3811) /** The chunk has already been mapped into the process. */ #define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812) /** The chunk to be unmapped isn't actually mapped into the process. */ #define VERR_GMM_CHUNK_NOT_MAPPED (-3813) /** The chunk has been mapped too many times already (impossible). */ #define VERR_GMM_TOO_MANY_CHUNK_MAPPINGS (-3814) /** The reservation or reservation update was declined - too many VMs, too * little memory, and/or too low GMM configuration. */ #define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3815) /** A GMM sanity check failed. */ #define VERR_GMM_IS_NOT_SANE (-3816) /** Inserting a new chunk failed. */ #define VERR_GMM_CHUNK_INSERT (-3817) /** Failed to obtain the GMM instance. */ #define VERR_GMM_INSTANCE (-3818) /** Bad mutex semaphore flags. */ #define VERR_GMM_MTX_FLAGS (-3819) /** Internal processing error in the page allocator. */ #define VERR_GMM_ALLOC_PAGES_IPE (-3820) /** Invalid page count given to GMMR3FreePagesPerform. */ #define VERR_GMM_ACTUAL_PAGES_IPE (-3821) /** The shared module name is too long. */ #define VERR_GMM_MODULE_NAME_TOO_LONG (-3822) /** The shared module version string is too long. */ #define VERR_GMM_MODULE_VERSION_TOO_LONG (-3823) /** The shared module has too many regions. */ #define VERR_GMM_TOO_MANY_REGIONS (-3824) /** The guest has reported too many modules. */ #define VERR_GMM_TOO_MANY_PER_VM_MODULES (-3825) /** The guest has reported too many modules. */ #define VERR_GMM_TOO_MANY_GLOBAL_MODULES (-3826) /** The shared module is already registered. */ #define VINF_GMM_SHARED_MODULE_ALREADY_REGISTERED (3827) /** The shared module clashed address wise with a previously registered * module. */ #define VERR_GMM_SHARED_MODULE_ADDRESS_CLASH (-3828) /** The shared module was not found. */ #define VERR_GMM_SHARED_MODULE_NOT_FOUND (-3829) /** The size of the shared module was out of range. */ #define VERR_GMM_BAD_SHARED_MODULE_SIZE (-3830) /** The size of the one or more regions in the shared module was out of * range. */ #define VERR_GMM_SHARED_MODULE_BAD_REGIONS_SIZE (-3831) /** @} */ /** @name VBox GVM Status Codes * @{ */ /** The GVM is out of VM handle space. */ #define VERR_GVM_TOO_MANY_VMS (-3900) /** The EMT was not blocked at the time of the call. */ #define VINF_GVM_NOT_BLOCKED 3901 /** The EMT was not busy running guest code at the time of the call. */ #define VINF_GVM_NOT_BUSY_IN_GC 3902 /** RTThreadYield was called during a GVMMR0SchedPoll call. */ #define VINF_GVM_YIELDED 3903 /** @} */ /** @name VBox VMX Status Codes * @{ */ /** VMXON failed; possibly because it was already run before. */ #define VERR_VMX_VMXON_FAILED (-4000) /** Invalid VMCS pointer. * (Can be OR'ed with VERR_VMX_INVALID_VMCS_FIELD.) */ #define VERR_VMX_INVALID_VMCS_PTR (-4001) /** Invalid VMCS index or write to read-only element. */ #define VERR_VMX_INVALID_VMCS_FIELD (-4002) /** Reserved for future status code that we wish to OR with * VERR_VMX_INVALID_VMCS_PTR and VERR_VMX_INVALID_VMCS_FIELD. */ #define VERR_VMX_RESERVED (-4003) /** Invalid VMXON pointer. */ #define VERR_VMX_INVALID_VMXON_PTR (-4004) /** Unable to start VM execution. */ #define VERR_VMX_UNABLE_TO_START_VM (-4005) /** Unable to switch due to invalid host state. */ #define VERR_VMX_INVALID_HOST_STATE (-4006) /** VMX CPU extension not available in hardware. */ #define VERR_VMX_NO_VMX (-4009) /** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */ #define VERR_VMX_IN_VMX_ROOT_MODE (-4011) /** Somebody cleared X86_CR4_VMXE in the CR4 register. */ #define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012) /** Failed to enable and lock VT-x features. */ #define VERR_VMX_MSR_LOCKING_FAILED (-4013) /** Unable to switch due to invalid guest state. */ #define VERR_VMX_INVALID_GUEST_STATE (-4014) /** Unexpected VM exit. */ #define VERR_VMX_UNEXPECTED_EXIT (-4015) /** Unexpected VM exception. */ #define VERR_VMX_UNEXPECTED_EXCEPTION (-4016) /** Unexpected interruption exit type. */ #define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_TYPE (-4017) /** CPU is not in VMX root mode; unexpected when leaving VMX root mode. */ #define VERR_VMX_NOT_IN_VMX_ROOT_MODE (-4018) /** Undefined VM exit code. */ #define VERR_VMX_UNDEFINED_EXIT_CODE (-4019) /** VMPTRLD failed; possibly because of invalid VMCS launch-state. */ #define VERR_VMX_VMPTRLD_FAILED (-4021) /** Invalid VMCS pointer passed to VMLAUNCH/VMRESUME. */ #define VERR_VMX_INVALID_VMCS_PTR_TO_START_VM (-4022) /** Internal VMX processing error no 1. */ #define VERR_VMX_IPE_1 (-4023) /** Internal VMX processing error no 2. */ #define VERR_VMX_IPE_2 (-4024) /** Internal VMX processing error no 3. */ #define VERR_VMX_IPE_3 (-4025) /** Internal VMX processing error no 4. */ #define VERR_VMX_IPE_4 (-4026) /** Internal VMX processing error no 5. */ #define VERR_VMX_IPE_5 (-4027) /** VT-x features for all modes (SMX and non-SMX) disabled by the BIOS. */ #define VERR_VMX_MSR_ALL_VMX_DISABLED (-4028) /** VT-x features disabled by the BIOS. */ #define VERR_VMX_MSR_VMX_DISABLED (-4029) /** VT-x VMCS field cache invalid. */ #define VERR_VMX_VMCS_FIELD_CACHE_INVALID (-4030) /** Failed to set VMXON enable bit while enabling VT-x through the MSR. */ #define VERR_VMX_MSR_VMX_ENABLE_FAILED (-4031) /** Failed to enable VMXON-in-SMX bit while enabling VT-x through the MSR. */ #define VERR_VMX_MSR_SMX_VMX_ENABLE_FAILED (-4032) /** An operation caused a nested-guest VM-exit. */ #define VINF_VMX_VMEXIT 4033 /** Generic VM-entry failure. */ #define VERR_VMX_VMENTRY_FAILED (-4033) /** Generic VM-exit failure. */ #define VERR_VMX_VMEXIT_FAILED (-4034) /** The requested nested-guest VMX intercept is not active or not in * nested-guest execution mode. */ #define VINF_VMX_INTERCEPT_NOT_ACTIVE 4035 /** The behavior of the instruction/operation is modified/needs modification * in VMX non-root mode. */ #define VINF_VMX_MODIFIES_BEHAVIOR 4036 /** VMLAUNCH/VMRESUME succeeded, can enter nested-guest execution. */ #define VINF_VMX_VMLAUNCH_VMRESUME 4037 /** VT-x VMCS launch state invalid. */ #define VERR_VMX_INVALID_VMCS_LAUNCH_STATE (-4038) /** Precodition no 0 in hmR0VMXStartVm failed. */ #define VERR_VMX_STARTVM_PRECOND_0 (-4039) /** Precodition no 1 in hmR0VMXStartVm failed. */ #define VERR_VMX_STARTVM_PRECOND_1 (-4040) /** Precodition no 2 in hmR0VMXStartVm failed. */ #define VERR_VMX_STARTVM_PRECOND_2 (-4041) /** Precodition no 3 in hmR0VMXStartVm failed. */ #define VERR_VMX_STARTVM_PRECOND_3 (-4042) /** @} */ /** @name VBox SVM Status Codes * @{ */ /** Unable to start VM execution. */ #define VERR_SVM_UNABLE_TO_START_VM (-4050) /** AMD-V bit not set in K6_EFER MSR */ #define VERR_SVM_ILLEGAL_EFER_MSR (-4051) /** AMD-V CPU extension not available. */ #define VERR_SVM_NO_SVM (-4052) /** AMD-V CPU extension disabled (by BIOS). */ #define VERR_SVM_DISABLED (-4053) /** AMD-V CPU extension in-use. */ #define VERR_SVM_IN_USE (-4054) /** Invalid pVMCB. */ #define VERR_SVM_INVALID_PVMCB (-4055) /** Unexpected SVM exit. */ #define VERR_SVM_UNEXPECTED_EXIT (-4056) /** Unexpected SVM exception exit. */ #define VERR_SVM_UNEXPECTED_XCPT_EXIT (-4057) /** Unexpected SVM patch type. */ #define VERR_SVM_UNEXPECTED_PATCH_TYPE (-4058) /** Unable to start VM execution due to an invalid guest state. */ #define VERR_SVM_INVALID_GUEST_STATE (-4059) /** Unknown or unrecognized SVM exit. */ #define VERR_SVM_UNKNOWN_EXIT (-4060) /** Internal SVM processing error no 1. */ #define VERR_SVM_IPE_1 (-4061) /** Internal SVM processing error no 2. */ #define VERR_SVM_IPE_2 (-4062) /** Internal SVM processing error no 3. */ #define VERR_SVM_IPE_3 (-4063) /** Internal SVM processing error no 4. */ #define VERR_SVM_IPE_4 (-4064) /** Internal SVM processing error no 5. */ #define VERR_SVM_IPE_5 (-4065) /** The nested-guest \#VMEXIT processing failed, initiate shutdown. */ #define VERR_SVM_VMEXIT_FAILED (-4066) /** An operation caused a nested-guest SVM \#VMEXIT. */ #define VINF_SVM_VMEXIT 4067 /** VMRUN emulation succeeded, ready to immediately enter the nested-guest. */ #define VINF_SVM_VMRUN 4068 /** The requested nested-guest SVM intercept is not active or not in * nested-guest execution mode. */ #define VINF_SVM_INTERCEPT_NOT_ACTIVE 4069 /** Precodition no 0 in hmR0SvmVmRun failed. */ #define VERR_SVM_VMRUN_PRECOND_0 (-4070) /** Precodition no 1 in hmR0SvmVmRun failed. */ #define VERR_SVM_VMRUN_PRECOND_1 (-4071) /** Precodition no 2 in hmR0SvmVmRun failed. */ #define VERR_SVM_VMRUN_PRECOND_2 (-4072) /** Precodition no 3 in hmR0SvmVmRun failed. */ #define VERR_SVM_VMRUN_PRECOND_3 (-4073) /** @} */ /** @name VBox HM Status Codes * @{ */ /** Host is about to go into suspend mode. */ #define VERR_HM_SUSPEND_PENDING (-4100) /** Conflicting CFGM values. */ #define VERR_HM_CONFIG_MISMATCH (-4103) /** Internal processing error in the HM init code. */ #define VERR_HM_ALREADY_ENABLED_IPE (-4104) /** Unexpected MSR in the auto-load/store area. */ #define VERR_HM_UNEXPECTED_LD_ST_MSR (-4105) /** No 32-bit to 64-bit switcher in place. */ #define VERR_HM_NO_32_TO_64_SWITCHER (-4106) /** HMR0Leave was called on the wrong CPU. */ #define VERR_HM_WRONG_CPU (-4107) /** Internal processing error \#1 in the HM code. */ #define VERR_HM_IPE_1 (-4108) /** Internal processing error \#2 in the HM code. */ #define VERR_HM_IPE_2 (-4109) /** Wrong 32/64-bit switcher. */ #define VERR_HM_WRONG_SWITCHER (-4110) /** Unknown I/O instruction. */ #define VERR_HM_UNKNOWN_IO_INSTRUCTION (-4111) /** Unsupported CPU feature combination. */ #define VERR_HM_UNSUPPORTED_CPU_FEATURE_COMBO (-4112) /** Internal processing error \#3 in the HM code. */ #define VERR_HM_IPE_3 (-4113) /** Internal processing error \#4 in the HM code. */ #define VERR_HM_IPE_4 (-4114) /** Internal processing error \#5 in the HM code. */ #define VERR_HM_IPE_5 (-4115) /** Invalid HM64ON32OP value. */ #define VERR_HM_INVALID_HM64ON32OP (-4116) /** Resume guest execution after injecting a double-fault. */ #define VINF_HM_DOUBLE_FAULT 4117 /** Pending exception; continue guest execution. */ #define VINF_HM_PENDING_XCPT 4118 /** @} */ /** @name VBox Disassembler Status Codes * @{ */ /** Invalid opcode byte(s) */ #define VERR_DIS_INVALID_OPCODE (-4200) /** Generic failure during disassembly. */ #define VERR_DIS_GEN_FAILURE (-4201) /** No read callback. */ #define VERR_DIS_NO_READ_CALLBACK (-4202) /** Invalid Mod/RM. */ #define VERR_DIS_INVALID_MODRM (-4203) /** Invalid parameter index. */ #define VERR_DIS_INVALID_PARAMETER (-4204) /** The instruction is too long. */ #define VERR_DIS_TOO_LONG_INSTR (-4206) /** @} */ /** @name VBox Webservice Status Codes * @{ */ /** Authentication failed (ISessionManager::logon()) */ #define VERR_WEB_NOT_AUTHENTICATED (-4300) /** Invalid format of managed object reference */ #define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301) /** Invalid session ID in managed object reference */ #define VERR_WEB_INVALID_SESSION_ID (-4302) /** Invalid object ID in managed object reference */ #define VERR_WEB_INVALID_OBJECT_ID (-4303) /** Unsupported interface for managed object reference */ #define VERR_WEB_UNSUPPORTED_INTERFACE (-4304) /** @} */ /** @name VBox PARAV Status Codes * @{ */ /** Switch back to host */ #define VINF_PARAV_SWITCH_TO_HOST 4400 /** @} */ /** @name VBox Video HW Acceleration command status * @{ */ /** command processing is pending, a completion handler will be called */ #define VINF_VHWA_CMD_PENDING 4500 /** @} */ /** @name VBox COM error codes * * @remarks Global::vboxStatusCodeToCOM and Global::vboxStatusCodeFromCOM uses * these for conversion that is lossless with respect to important COM * status codes. These methods should be moved to the glue library. * @{ */ /** Unexpected turn of events. */ #define VERR_COM_UNEXPECTED (-4600) /** The base of the VirtualBox COM status codes (the lower value) * corresponding 1:1 to VBOX_E_XXX. This is the lowest value. */ #define VERR_COM_VBOX_LOWEST (-4699) /** Object corresponding to the supplied arguments does not exist. */ #define VERR_COM_OBJECT_NOT_FOUND (VERR_COM_VBOX_LOWEST + 1) /** Current virtual machine state prevents the operation. */ #define VERR_COM_INVALID_VM_STATE (VERR_COM_VBOX_LOWEST + 2) /** Virtual machine error occurred attempting the operation. */ #define VERR_COM_VM_ERROR (VERR_COM_VBOX_LOWEST + 3) /** File not accessible or erroneous file contents. */ #define VERR_COM_FILE_ERROR (VERR_COM_VBOX_LOWEST + 4) /** IPRT error. */ #define VERR_COM_IPRT_ERROR (VERR_COM_VBOX_LOWEST + 5) /** Pluggable Device Manager error. */ #define VERR_COM_PDM_ERROR (VERR_COM_VBOX_LOWEST + 6) /** Current object state prohibits operation. */ #define VERR_COM_INVALID_OBJECT_STATE (VERR_COM_VBOX_LOWEST + 7) /** Host operating system related error. */ #define VERR_COM_HOST_ERROR (VERR_COM_VBOX_LOWEST + 8) /** Requested operation is not supported. */ #define VERR_COM_NOT_SUPPORTED (VERR_COM_VBOX_LOWEST + 9) /** Invalid XML found. */ #define VERR_COM_XML_ERROR (VERR_COM_VBOX_LOWEST + 10) /** Current session state prohibits operation. */ #define VERR_COM_INVALID_SESSION_STATE (VERR_COM_VBOX_LOWEST + 11) /** Object being in use prohibits operation. */ #define VERR_COM_OBJECT_IN_USE (VERR_COM_VBOX_LOWEST + 12) /** Returned by callback methods which does not need to be called * again because the client does not actually make use of them. */ #define VERR_COM_DONT_CALL_AGAIN (VERR_COM_VBOX_LOWEST + 13) /** @} */ /** @name VBox VMMDev Status codes * @{ */ /** CPU hotplug events from VMMDev are not monitored by the guest. */ #define VERR_VMMDEV_CPU_HOTPLUG_NOT_MONITORED_BY_GUEST (-4700) /** @} */ /** @name VBox async I/O manager Status Codes * @{ */ /** Async I/O task is pending, a completion handler will be called. */ #define VINF_AIO_TASK_PENDING 4800 /** @} */ /** @name VBox Virtual SCSI Status Codes * @{ */ /** LUN type is not supported. */ #define VERR_VSCSI_LUN_TYPE_NOT_SUPPORTED (-4900) /** LUN is already/still attached to a device. */ #define VERR_VSCSI_LUN_ATTACHED_TO_DEVICE (-4901) /** The specified LUN is invalid. */ #define VERR_VSCSI_LUN_INVALID (-4902) /** The LUN is not attached to the device. */ #define VERR_VSCSI_LUN_NOT_ATTACHED (-4903) /** The LUN is still busy. */ #define VERR_VSCSI_LUN_BUSY (-4904) /** @} */ /** @name VBox FAM Status Codes * @{ */ /** FAM failed to open a connection. */ #define VERR_FAM_OPEN_FAILED (-5000) /** FAM failed to add a file to the list to be monitored. */ #define VERR_FAM_MONITOR_FILE_FAILED (-5001) /** FAM failed to add a directory to the list to be monitored. */ #define VERR_FAM_MONITOR_DIRECTORY_FAILED (-5002) /** The connection to the FAM daemon was lost. */ #define VERR_FAM_CONNECTION_LOST (-5003) /** @} */ /** @name PCI Bus & Passthrough Status Codes * @{ */ /** RamPreAlloc not set. * RAM pre-allocation is currently a requirement for PCI passthrough. */ #define VERR_PCI_PASSTHROUGH_NO_RAM_PREALLOC (-5100) /** VT-x/AMD-V not active. * PCI passthrough currently works only if VT-x/AMD-V is active. */ #define VERR_PCI_PASSTHROUGH_NO_HM (-5101) /** Nested paging not active. * PCI passthrough currently works only if nested paging is active. */ #define VERR_PCI_PASSTHROUGH_NO_NESTED_PAGING (-5102) /** Special return code from a PCI I/O region mapping handler that tells the BUS * that it has done the mapping already. */ #define VINF_PCI_MAPPING_DONE 5150 /** @} */ /** @name GVMM Status Codes * @{ */ /** Internal error obtaining the GVMM instance. */ #define VERR_GVMM_INSTANCE (-5200) /** GVMM does not support the range of CPUs present/possible on the host. */ #define VERR_GVMM_HOST_CPU_RANGE (-5201) /** GVMM ran into some broken IPRT code. */ #define VERR_GVMM_BROKEN_IPRT (-5202) /** Internal processing error \#1 in the GVMM code. */ #define VERR_GVMM_IPE_1 (-5203) /** Internal processing error \#2 in the GVMM code. */ #define VERR_GVMM_IPE_2 (-5204) /** Cannot destroy VM because not all other EMTs have deregistered. */ #define VERR_GVMM_NOT_ALL_EMTS_DEREGISTERED (-5205) /** @} */ /** @name IEM Status Codes * @{ */ /** The instruction is not yet implemented by IEM. */ #define VERR_IEM_INSTR_NOT_IMPLEMENTED (-5300) /** Invalid operand size passed to an IEM function. */ #define VERR_IEM_INVALID_OPERAND_SIZE (-5301) /** Invalid address mode passed to an IEM function. */ #define VERR_IEM_INVALID_ADDRESS_MODE (-5302) /** Invalid effective segment register number passed to an IEM function. */ #define VERR_IEM_INVALID_EFF_SEG (-5303) /** Invalid instruction length passed to an IEM function. */ #define VERR_IEM_INVALID_INSTR_LENGTH (-5304) /** Internal status code for indicating that a selector isn't valid (LAR, LSL, * VERR, VERW). This is not used outside the instruction implementations. */ #define VINF_IEM_SELECTOR_NOT_OK (5305) /** Returns by rep-prefixed string instruction if they yield because of * pending FFs. The status code is internal to IEM. */ #define VINF_IEM_YIELD_PENDING_FF (5306) /** Recompiled execution: Break out of current TB execution. */ #define VINF_IEM_REEXEC_BREAK (5310) /** Recompilation: End translation block. */ #define VINF_IEM_RECOMPILE_END_TB (5311) /** Recompiler: Translation block allocation failed. */ #define VERR_IEM_TB_ALLOC_FAILED (-5312) /** Restart the current instruction. For testing only. */ #define VERR_IEM_RESTART_INSTRUCTION (-5389) /** This particular aspect of the instruction is not yet implemented by IEM. */ #define VERR_IEM_ASPECT_NOT_IMPLEMENTED (-5390) /** Internal processing error \#1 in the IEM code. */ #define VERR_IEM_IPE_1 (-5391) /** Internal processing error \#2 in the IEM code. */ #define VERR_IEM_IPE_2 (-5392) /** Internal processing error \#3 in the IEM code. */ #define VERR_IEM_IPE_3 (-5393) /** Internal processing error \#4 in the IEM code. */ #define VERR_IEM_IPE_4 (-5394) /** Internal processing error \#5 in the IEM code. */ #define VERR_IEM_IPE_5 (-5395) /** Internal processing error \#6 in the IEM code. */ #define VERR_IEM_IPE_6 (-5396) /** Internal processing error \#7 in the IEM code. */ #define VERR_IEM_IPE_7 (-5397) /** Internal processing error \#8 in the IEM code. */ #define VERR_IEM_IPE_8 (-5398) /** Internal processing error \#9 in the IEM code. */ #define VERR_IEM_IPE_9 (-5399) /** @} */ /** @name DBGC Status Codes * @{ */ /** Status that causes DBGC to quit. */ #define VERR_DBGC_QUIT (-5400) /** Async command pending. */ #define VWRN_DBGC_CMD_PENDING 5401 /** The command has already been registered. */ #define VWRN_DBGC_ALREADY_REGISTERED 5402 /** The command cannot be deregistered because has not been registered. */ #define VERR_DBGC_COMMANDS_NOT_REGISTERED (-5403) /** Unknown breakpoint. */ #define VERR_DBGC_BP_NOT_FOUND (-5404) /** The breakpoint already exists. */ #define VERR_DBGC_BP_EXISTS (-5405) /** The breakpoint has no command. */ #define VINF_DBGC_BP_NO_COMMAND 5406 /** Generic debugger command failure. */ #define VERR_DBGC_COMMAND_FAILED (-5407) /** Logic bug in the DBGC code. */ #define VERR_DBGC_IPE (-5408) /** The lowest parse status code. */ #define VERR_DBGC_PARSE_LOWEST (-5499) /** Syntax error - too few arguments. */ #define VERR_DBGC_PARSE_TOO_FEW_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 0) /** Syntax error - too many arguments. */ #define VERR_DBGC_PARSE_TOO_MANY_ARGUMENTS (VERR_DBGC_PARSE_LOWEST + 1) /** Syntax error - too many arguments for static storage. */ #define VERR_DBGC_PARSE_ARGUMENT_OVERFLOW (VERR_DBGC_PARSE_LOWEST + 2) /** Syntax error - expected binary operator. */ #define VERR_DBGC_PARSE_EXPECTED_BINARY_OP (VERR_DBGC_PARSE_LOWEST + 3) /** Syntax error - the argument does not allow a range to be specified. */ #define VERR_DBGC_PARSE_NO_RANGE_ALLOWED (VERR_DBGC_PARSE_LOWEST + 5) /** Syntax error - unbalanced quotes. */ #define VERR_DBGC_PARSE_UNBALANCED_QUOTE (VERR_DBGC_PARSE_LOWEST + 6) /** Syntax error - unbalanced parenthesis. */ #define VERR_DBGC_PARSE_UNBALANCED_PARENTHESIS (VERR_DBGC_PARSE_LOWEST + 7) /** Syntax error - an argument or subargument contains nothing useful. */ #define VERR_DBGC_PARSE_EMPTY_ARGUMENT (VERR_DBGC_PARSE_LOWEST + 8) /** Syntax error - invalid operator usage. */ #define VERR_DBGC_PARSE_UNEXPECTED_OPERATOR (VERR_DBGC_PARSE_LOWEST + 9) /** Syntax error - invalid numeric value. */ #define VERR_DBGC_PARSE_INVALID_NUMBER (VERR_DBGC_PARSE_LOWEST + 10) /** Syntax error - numeric overflow. */ #define VERR_DBGC_PARSE_NUMBER_TOO_BIG (VERR_DBGC_PARSE_LOWEST + 11) /** Syntax error - invalid operation attempted. */ #define VERR_DBGC_PARSE_INVALID_OPERATION (VERR_DBGC_PARSE_LOWEST + 12) /** Syntax error - function not found. */ #define VERR_DBGC_PARSE_FUNCTION_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 13) /** Syntax error - the specified function is not a function. */ #define VERR_DBGC_PARSE_NOT_A_FUNCTION (VERR_DBGC_PARSE_LOWEST + 14) /** Syntax error - out of scratch memory. */ #define VERR_DBGC_PARSE_NO_SCRATCH (VERR_DBGC_PARSE_LOWEST + 15) /** Syntax error - out of regular heap memory. */ #define VERR_DBGC_PARSE_NO_MEMORY (VERR_DBGC_PARSE_LOWEST + 16) /** Syntax error - incorrect argument type. */ #define VERR_DBGC_PARSE_INCORRECT_ARG_TYPE (VERR_DBGC_PARSE_LOWEST + 17) /** Syntax error - an undefined variable was referenced. */ #define VERR_DBGC_PARSE_VARIABLE_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 18) /** Syntax error - a type conversion failed. */ #define VERR_DBGC_PARSE_CONVERSION_FAILED (VERR_DBGC_PARSE_LOWEST + 19) /** Syntax error - you hit a debugger feature which isn't implemented yet. * (Feel free to help implement it.) */ #define VERR_DBGC_PARSE_NOT_IMPLEMENTED (VERR_DBGC_PARSE_LOWEST + 20) /** Syntax error - Couldn't satisfy a request for a specific result type. */ #define VERR_DBGC_PARSE_BAD_RESULT_TYPE (VERR_DBGC_PARSE_LOWEST + 21) /** Syntax error - Cannot read symbol value, it is a set-only symbol. */ #define VERR_DBGC_PARSE_WRITEONLY_SYMBOL (VERR_DBGC_PARSE_LOWEST + 22) /** Syntax error - Invalid command name. */ #define VERR_DBGC_PARSE_INVALD_COMMAND_NAME (VERR_DBGC_PARSE_LOWEST + 23) /** Syntax error - Command not found. */ #define VERR_DBGC_PARSE_COMMAND_NOT_FOUND (VERR_DBGC_PARSE_LOWEST + 24) /** Syntax error - buggy parser. */ #define VERR_DBGC_PARSE_BUG (VERR_DBGC_PARSE_LOWEST + 25) /** @} */ /** @name Support driver/library shared verification status codes. * @{ */ /** Process Verification Failure: The memory content does not match the image * file. */ #define VERR_SUP_VP_MEMORY_VS_FILE_MISMATCH (-5600) /** Process Verification Failure: The memory protection of a image file section * does not match what the section header prescribes. */ #define VERR_SUP_VP_SECTION_PROTECTION_MISMATCH (-5601) /** Process Verification Failure: One of the section in the image file is not * mapped into memory. */ #define VERR_SUP_VP_SECTION_NOT_MAPPED (-5602) /** Process Verification Failure: One of the section in the image file is not * fully mapped into memory. */ #define VERR_SUP_VP_SECTION_NOT_FULLY_MAPPED (-5603) /** Process Verification Failure: Bad file alignment value in image header. */ #define VERR_SUP_VP_BAD_FILE_ALIGNMENT_VALUE (-5604) /** Process Verification Failure: Bad image base in header. */ #define VERR_SUP_VP_BAD_IMAGE_BASE (-5605) /** Process Verification Failure: Bad image signature. */ #define VERR_SUP_VP_BAD_IMAGE_SIGNATURE (-5606) /** Process Verification Failure: Bad image size. */ #define VERR_SUP_VP_BAD_IMAGE_SIZE (-5607) /** Process Verification Failure: Bad new-header offset in the MZ header. */ #define VERR_SUP_VP_BAD_MZ_OFFSET (-5608) /** Process Verification Failure: Bad optional header field. */ #define VERR_SUP_VP_BAD_OPTIONAL_HEADER (-5609) /** Process Verification Failure: Bad section alignment value in image * header. */ #define VERR_SUP_VP_BAD_SECTION_ALIGNMENT_VALUE (-5610) /** Process Verification Failure: Bad section raw data size. */ #define VERR_SUP_VP_BAD_SECTION_FILE_SIZE (-5611) /** Process Verification Failure: Bad virtual section address. */ #define VERR_SUP_VP_BAD_SECTION_RVA (-5612) /** Process Verification Failure: Bad virtual section size. */ #define VERR_SUP_VP_BAD_SECTION_VIRTUAL_SIZE (-5613) /** Process Verification Failure: Bad size of image header. */ #define VERR_SUP_VP_BAD_SIZE_OF_HEADERS (-5614) /** Process Verification Failure: The process is being debugged. */ #define VERR_SUP_VP_DEBUGGED (-5615) /** Process Verification Failure: A DLL was found more than once. */ #define VERR_SUP_VP_DUPLICATE_DLL_MAPPING (-5616) /** Process Verification Failure: Image section region is too large. */ #define VERR_SUP_VP_EMPTY_REGION_TOO_LARGE (-5617) /** Process Verification Failure: Executable file name and process image name * does not match up. */ #define VERR_SUP_VP_EXE_VS_PROC_NAME_MISMATCH (-5618) /** Process Verification Failure: Found executable memory allocated in the * process. There is only supposed be executable memory associated with * image file mappings (DLLs & EXE). */ #define VERR_SUP_VP_FOUND_EXEC_MEMORY (-5619) /** Process Verification Failure: There is more than one known executable mapped * into the process. */ #define VERR_SUP_VP_FOUND_MORE_THAN_ONE_EXE_MAPPING (-5620) /** Process Verification Failure: Error closing image file handle. */ #define VERR_SUP_VP_IMAGE_FILE_CLOSE_ERROR (-5621) /** Process Verification Failure: Error opening image file. */ #define VERR_SUP_VP_IMAGE_FILE_OPEN_ERROR (-5622) /** Process Verification Failure: Error reading image file header. */ #define VERR_SUP_VP_IMAGE_HDR_READ_ERROR (-5623) /** Process Verification Failure: Image mapping is bogus as the first region * has different AllocationBase and BaseAddress values, indicating that a * section was unmapped or otherwise tampered with. */ #define VERR_SUP_VP_IMAGE_MAPPING_BASE_ERROR (-5624) /** Process Verification Failure: Error reading process memory for comparing * with disk data. */ #define VERR_SUP_VP_MEMORY_READ_ERROR (-5625) /** Process Verification Failure: Found no executable mapped into the process * address space. */ #define VERR_SUP_VP_NO_FOUND_NO_EXE_MAPPING (-5626) /** Process Verification Failure: An image mapping failed to report a name. */ #define VERR_SUP_VP_NO_IMAGE_MAPPING_NAME (-5627) /** Process Verification Failure: No KERNE32.DLL mapping found. This is * impossible. */ #define VERR_SUP_VP_NO_KERNEL32_MAPPING (-5628) /** Process Verification Failure: Error allocating memory. */ #define VERR_SUP_VP_NO_MEMORY (-5629) /** Process Verification Failure: Error allocating state memory or querying * the system32 path. */ #define VERR_SUP_VP_NO_MEMORY_STATE (-5630) /** Process Verification Failure: No NTDLL.DLL mapping found. This is * impossible. */ #define VERR_SUP_VP_NO_NTDLL_MAPPING (-5631) /** Process Verification Failure: A DLL residing outside System32 was found * in the process. */ #define VERR_SUP_VP_NON_SYSTEM32_DLL (-5632) /** Process Verification Failure: An unknown and unwanted DLL was found loaded * into the process. */ #define VERR_SUP_VP_NOT_KNOWN_DLL_OR_EXE (-5633) /** Process Verification Failure: The name of an image file changes between * mapping regions. */ #define VERR_SUP_VP_NT_MAPPING_NAME_CHANGED (-5634) /** Process Verification Failure: Error querying process name. */ #define VERR_SUP_VP_NT_QI_PROCESS_NM_ERROR (-5635) /** Process Verification Failure: Error querying thread information. */ #define VERR_SUP_VP_NT_QI_THREAD_ERROR (-5636) /** Process Verification Failure: Error query virtual memory information. */ #define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_ERROR (-5637) /** Process Verification Failure: Error query virtual memory mapping name. */ #define VERR_SUP_VP_NT_QI_VIRTUAL_MEMORY_NM_ERROR (-5638) /** Process Verification Failure: Error determining the full path of * System32. */ #define VERR_SUP_VP_SYSTEM32_PATH (-5639) /** Process Verification Failure: The process has more than one thread. */ #define VERR_SUP_VP_THREAD_NOT_ALONE (-5640) /** Process Verification Failure: The image mapping is too large (>= 2GB). */ #define VERR_SUP_VP_TOO_HIGH_REGION_RVA (-5641) /** Process Verification Failure: The memory region is too large (>= 2GB). */ #define VERR_SUP_VP_TOO_LARGE_REGION (-5642) /** Process Verification Failure: There are too many DLLs loaded. */ #define VERR_SUP_VP_TOO_MANY_DLLS_LOADED (-5643) /** Process Verification Failure: An image has too many regions. */ #define VERR_SUP_VP_TOO_MANY_IMAGE_REGIONS (-5644) /** Process Verification Failure: The process has too many virtual memory * regions. */ #define VERR_SUP_VP_TOO_MANY_MEMORY_REGIONS (-5645) /** Process Verification Failure: An image has too many sections. */ #define VERR_SUP_VP_TOO_MANY_SECTIONS (-5646) /** Process Verification Failure: An image is targeting an unexpected * machine/CPU. */ #define VERR_SUP_VP_UNEXPECTED_IMAGE_MACHINE (-5647) /** Process Verification Failure: Unexpected section protection flag * combination. */ #define VERR_SUP_VP_UNEXPECTED_SECTION_FLAGS (-5648) /** Process Verification Failure: Expected the process and exe to have forced * integrity checking enabled (verifying signatures). */ #define VERR_SUP_VP_EXE_MISSING_FORCE_INTEGRITY (-5649) /** Process Verification Failure: Expected the process and exe to have dynamic * base enabled. */ #define VERR_SUP_VP_EXE_MISSING_DYNAMIC_BASE (-5650) /** Process Verification Failure: Expected the process and exe to advertise * NX compatibility. */ #define VERR_SUP_VP_EXE_MISSING_NX_COMPAT (-5651) /** Process Verification Failure: The DllCharacteristics of the process * does not match the value in the optional header in the exe file. */ #define VERR_SUP_VP_DLL_CHARECTERISTICS_MISMATCH (-5652) /** Process Verification Failure: The ImageCharacteristics of the process * does not match the value in the file header in the exe file. */ #define VERR_SUP_VP_IMAGE_CHARECTERISTICS_MISMATCH (-5653) /** Process Verification Failure: Error querying image information. */ #define VERR_SUP_VP_NT_QI_PROCESS_IMG_INFO_ERROR (-5654) /** Process Verification Failure: Error querying debug port. */ #define VERR_SUP_VP_NT_QI_PROCESS_DBG_PORT_ERROR (-5655) /** WinVerifyTrust failed with an unexpected status code when using the * catalog-file approach. */ #define VERR_SUP_VP_WINTRUST_CAT_FAILURE (-5656) /** The image is required to be signed with the same certificate as the rest * of VirtualBox. */ #define VERR_SUP_VP_NOT_SIGNED_WITH_BUILD_CERT (-5657) /** Internal processing error: Not build certificate. */ #define VERR_SUP_VP_NOT_BUILD_CERT_IPE (-5658) /** The image requires to be signed using the kernel-code signing process. */ #define VERR_SUP_VP_NOT_VALID_KERNEL_CODE_SIGNATURE (-5659) /** Unexpected number of valid paths. */ #define VERR_SUP_VP_UNEXPECTED_VALID_PATH_COUNT (-5660) /** The image is required to force integrity checks. */ #define VERR_SUP_VP_SIGNATURE_CHECKS_NOT_ENFORCED (-5661) /** Process Verification Failure: Symantec Endpoint Protection must be * disabled for the VirtualBox VM processes. * http://www.symantec.com/connect/articles/creating-application-control-exclusions-symantec-endpoint-protection-121 */ #define VERR_SUP_VP_SYSFER_DLL (-5662) /** Process Purification Failure: KERNE32.DLL already mapped into the initial * process (suspended). */ #define VERR_SUP_VP_KERNEL32_ALREADY_MAPPED (-5663) /** Process Purification Failure: NtFreeVirtualMemory failed on a chunk of * executable memory which shouldn't be present in the process. */ #define VERR_SUP_VP_FREE_VIRTUAL_MEMORY_FAILED (-5664) /** Process Purification Failure: Both NtUnmapViewOfSetion and * NtProtectVirtualMemory failed to get rid of or passify an non-image * executable mapping. */ #define VERR_SUP_VP_UNMAP_AND_PROTECT_FAILED (-5665) /** Process Purification Failure: Unknown memory type of executable memory. */ #define VERR_SUP_VP_UNKOWN_MEM_TYPE (-5666) /** The image file is not owned by TrustedInstaller is it should be. */ #define VERR_SUP_VP_NOT_OWNED_BY_TRUSTED_INSTALLER (-5667) /** The image is outside the expected range. */ #define VERR_SUP_VP_IMAGE_TOO_BIG (-5668) /** Stub process not found so it cannot be revalidated when vboxdrv is opened * by the VM process. */ #define VERR_SUP_VP_STUB_NOT_FOUND (-5669) /** Error opening the stub process for revalidation when vboxdrv is opened by * the VM process. */ #define VERR_SUP_VP_STUB_OPEN_ERROR (-5670) /** Stub process thread not found during revalidation upon vboxdrv opening by * the VM process. */ #define VERR_SUP_VP_STUB_THREAD_NOT_FOUND (-5671) /** Error opening the stub process thread for revalidation when vboxdrv is * opened by the VM process. */ #define VERR_SUP_VP_STUB_THREAD_OPEN_ERROR (-5672) /** Process Purification Failure: NtAllocateVirtualMemory failed to get us * suitable replacement memory for a chunk of executable memory that * shouldn't be present in our process. (You will only see this message if you * got potentially fatally buggy anti-virus software installed.) */ #define VERR_SUP_VP_REPLACE_VIRTUAL_MEMORY_FAILED (-5673) /** Error getting the file mode. */ #define VERR_SUP_VP_FILE_MODE_ERROR (-5674) /** Error creating an event semaphore for used with asynchronous reads. */ #define VERR_SUP_VP_CREATE_READ_EVT_SEM_FAILED (-5675) /** Undesirable module. */ #define VERR_SUP_VP_UNDESIRABLE_MODULE (-5676) /** NtQueryObject/Type failed. */ #define VERR_SUP_VP_QUERY_HANDLE_TYPE (-5677) /** NtSetInformationObject/NoInherit failed. */ #define VERR_SUP_VP_SET_HANDLE_NOINHERIT (-5678) /** We are in driverless mode. */ #define VERR_SUP_DRIVERLESS (-5699) /** We are in driverless mode. */ #define VINF_SUP_DRIVERLESS 5699 /** @} */ /** @name VBox Extension Pack Status Codes * @{ */ /** The host is not supported. Uninstall the extension pack. * Returned by the VBOXEXTPACKREG::pfnInstalled. */ #define VERR_EXTPACK_UNSUPPORTED_HOST_UNINSTALL (-6000) /** The VirtualBox version is not supported by one of the extension packs. * * You have probably upgraded VirtualBox recently. Please upgrade the * extension packs to versions compatible with this VirtualBox release. */ #define VERR_EXTPACK_VBOX_VERSION_MISMATCH (-6001) /** @} */ /** @name VBox Guest Control Status Codes * @{ */ /** Guest side reported an error. */ #define VERR_GSTCTL_GUEST_ERROR (-6200) /** A guest control object has changed its overall status. */ #define VWRN_GSTCTL_OBJECTSTATE_CHANGED 6220 /** Guest process is in a wrong state. */ #define VERR_GSTCTL_PROCESS_WRONG_STATE (-6221) /** Maximum (context ID) sessions have been reached. */ #define VERR_GSTCTL_MAX_CID_SESSIONS_REACHED (-6222) /** Maximum (context ID) objects have been reached. */ #define VERR_GSTCTL_MAX_CID_OBJECTS_REACHED (-6223) /** Maximum (context ID object) count has been reached. */ #define VERR_GSTCTL_MAX_CID_COUNT_REACHED (-6224) /** Started guest process terminated with an exit code <> 0. */ #define VERR_GSTCTL_PROCESS_EXIT_CODE (-6225) /** @} */ /** @name GIM Status Codes * @{ */ /** No GIM provider is configured for this VM. */ #define VERR_GIM_NOT_ENABLED (-6300) /** GIM internal processing error \#1. */ #define VERR_GIM_IPE_1 (-6301) /** GIM internal processing error \#2. */ #define VERR_GIM_IPE_2 (-6302) /** GIM internal processing error \#3. */ #define VERR_GIM_IPE_3 (-6303) /** The GIM provider does not support any paravirtualized TSC. */ #define VERR_GIM_PVTSC_NOT_AVAILABLE (-6304) /** The guest has not setup use of the paravirtualized TSC. */ #define VERR_GIM_PVTSC_NOT_ENABLED (-6305) /** Unknown or invalid GIM provider. */ #define VERR_GIM_INVALID_PROVIDER (-6306) /** GIM generic operation failed. */ #define VERR_GIM_OPERATION_FAILED (-6307) /** The GIM provider does not support any hypercalls. */ #define VERR_GIM_HYPERCALLS_NOT_AVAILABLE (-6308) /** The guest has not setup use of the hypercalls. */ #define VERR_GIM_HYPERCALLS_NOT_ENABLED (-6309) /** The GIM device is not registered with GIM when it ought to be. */ #define VERR_GIM_DEVICE_NOT_REGISTERED (-6310) /** Hypercall cannot be enabled/performed due to access/permissions/CPL. */ #define VERR_GIM_HYPERCALL_ACCESS_DENIED (-6311) /** Failed to read to a memory region while performing a hypercall. */ #define VERR_GIM_HYPERCALL_MEMORY_READ_FAILED (-6312) /** Failed to write to a memory region while performing a hypercall. */ #define VERR_GIM_HYPERCALL_MEMORY_WRITE_FAILED (-6313) /** Generic hypercall operation failure. */ #define VERR_GIM_HYPERCALL_FAILED (-6314) /** No debug connection configured. */ #define VERR_GIM_NO_DEBUG_CONNECTION (-6315) /** Return to ring-3 to perform the hypercall there. */ #define VINF_GIM_R3_HYPERCALL 6316 /** Continuing hypercall at the same RIP, continue guest execution. */ #define VINF_GIM_HYPERCALL_CONTINUING 6317 /** Instruction that triggers the hypercall is invalid/unrecognized. */ #define VERR_GIM_INVALID_HYPERCALL_INSTR (-6318) /** @} */ /** @name Main API Status Codes * @{ */ /** The configuration constructor in main failed due to a COM error. Check * the release log of the VM for further details. */ #define VERR_MAIN_CONFIG_CONSTRUCTOR_COM_ERROR (-6400) /** The configuration constructor in main failed due to an internal consistency * error. Consult the release log of the VM for further details. */ #define VERR_MAIN_CONFIG_CONSTRUCTOR_IPE (-6401) /** @} */ /** @name VBox Drag and Drop Status Codes * @{ */ /** Guest side reported an error. */ #define VERR_DND_GUEST_ERROR (-6500) /** @} */ /** @name Audio Status Codes * @{ */ /** Host backend couldn't be initialized. Happen if the audio server is not * reachable, audio hardware is not available or similar. We should use the * NULL audio driver. */ #define VERR_AUDIO_BACKEND_INIT_FAILED (-6600) /** No host backend attached / available. */ #define VERR_AUDIO_BACKEND_NOT_ATTACHED (-6601) /** No free input streams. */ #define VERR_AUDIO_NO_FREE_INPUT_STREAMS (-6602) /** No free output streams. */ #define VERR_AUDIO_NO_FREE_OUTPUT_STREAMS (-6603) /** Pending stream disable operation in progress. */ #define VERR_AUDIO_STREAM_PENDING_DISABLE (-6604) /** There is more data available. * This can happen due to a buffer wraparound of a buffer read/write operation. */ #define VINF_AUDIO_MORE_DATA_AVAILABLE (6605) /** Stream is not ready for requested operation. */ #define VERR_AUDIO_STREAM_NOT_READY (-6605) /** Stream could not be created. * This might due to missing host (backend) drivers or a host not having the * required hardware, or that the requested stream configuration * is not supported by the host backend. */ #define VERR_AUDIO_STREAM_COULD_NOT_CREATE (-6606) /** Generic audio device enumeration error. */ #define VERR_AUDIO_ENUMERATION_FAILED (-6607) /** Asynchronous stream initialization still on-going. */ #define VERR_AUDIO_STREAM_INIT_IN_PROGRESS (-6608) /** Special PDMIHOSTAUDIO::pfnStreamCreate return value for triggering * calling of PDMIHOSTAUDIO::pfnStreamInitAsync on a worker thread. */ #define VINF_AUDIO_STREAM_ASYNC_INIT_NEEDED (6609) /** @} */ /** @name APIC Status Codes * @{ */ /** No pending interrupt. */ #define VERR_APIC_INTR_NOT_PENDING (-6700) /** Pending interrupt is masked by TPR. */ #define VERR_APIC_INTR_MASKED_BY_TPR (-6701) /** APIC did not accept the interrupt. */ #define VERR_APIC_INTR_DISCARDED (-6702) /** @} */ /** @name NEM Status Codes * @{ */ /** NEM is not enabled. */ #define VERR_NEM_NOT_ENABLED (-6800) /** NEM is not available. */ #define VERR_NEM_NOT_AVAILABLE (-6801) /** NEM init failed. */ #define VERR_NEM_INIT_FAILED (-6802) /** NEM init failed because of missing kernel API (\#1). */ #define VERR_NEM_MISSING_KERNEL_API_1 (-6803) /** NEM can only operate from ring-3. */ #define VERR_NEM_RING3_ONLY (-6804) /** NEM failed to create a native VM instance. */ #define VERR_NEM_VM_CREATE_FAILED (-6805) /** NEM failed to map page(s) into the VM. */ #define VERR_NEM_MAP_PAGES_FAILED (-6806) /** NEM failed to unmap page(s) into the VM. */ #define VERR_NEM_UNMAP_PAGES_FAILED (-6807) /** NEM failed to get registers. */ #define VERR_NEM_GET_REGISTERS_FAILED (-6808) /** NEM failed to set registers. */ #define VERR_NEM_SET_REGISTERS_FAILED (-6809) /** Get register caller must flush the TLB (not an error). */ #define VERR_NEM_FLUSH_TLB (-6810) /** Get register caller must flush the TLB. */ #define VINF_NEM_FLUSH_TLB (6810) /** NEM failed to set TSC. */ #define VERR_NEM_SET_TSC (-6811) /** NEM init failed because of missing kernel API (\#2). */ #define VERR_NEM_MISSING_KERNEL_API_2 (-6812) /** NEM init failed because of missing kernel API (\#3). */ #define VERR_NEM_MISSING_KERNEL_API_3 (-6813) /** NEM init failed because of missing kernel API (\#4). */ #define VERR_NEM_MISSING_KERNEL_API_4 (-6814) /** NEM init failed because of missing kernel API (\#5). */ #define VERR_NEM_MISSING_KERNEL_API_5 (-6815) /** NEM failed to query dirty page bitmap. */ #define VERR_NEM_QUERY_DIRTY_BITMAP_FAILED (-6816) /** NEM is missing a require feature in the host API. */ #define VERR_NEM_MISSING_FEATURE (-6817) /** NEM internal processing error \#0. */ #define VERR_NEM_IPE_0 (-6890) /** NEM internal processing error \#1. */ #define VERR_NEM_IPE_1 (-6891) /** NEM internal processing error \#2. */ #define VERR_NEM_IPE_2 (-6892) /** NEM internal processing error \#3. */ #define VERR_NEM_IPE_3 (-6893) /** NEM internal processing error \#4. */ #define VERR_NEM_IPE_4 (-6894) /** NEM internal processing error \#5. */ #define VERR_NEM_IPE_5 (-6895) /** NEM internal processing error \#6. */ #define VERR_NEM_IPE_6 (-6896) /** NEM internal processing error \#7. */ #define VERR_NEM_IPE_7 (-6897) /** NEM internal processing error \#8. */ #define VERR_NEM_IPE_8 (-6898) /** NEM internal processing error \#9. */ #define VERR_NEM_IPE_9 (-6899) /** @} */ /** @name Recording Status Codes * @{ */ /** Codec was not found. */ #define VERR_RECORDING_CODEC_NOT_FOUND (-6900) /** Codec initialization failed. */ #define VERR_RECORDING_CODEC_INIT_FAILED (-6902) /** Codec is not supported. */ #define VERR_RECORDING_CODEC_NOT_SUPPORTED (-6903) /** Format not supported by the codec. */ #define VERR_RECORDING_FORMAT_NOT_SUPPORTED (-6904) /** Recording is not possible due to a set restriction. */ #define VERR_RECORDING_RESTRICTED (-6905) /** Recording limit (time, size, ...) has been reached. */ #define VINF_RECORDING_LIMIT_REACHED (6906) /** Recording limit (time, size, ...) has been reached. */ #define VERR_RECORDING_LIMIT_REACHED (-6906) /** Recording has been throttled due to current settings. * This e.g. can happen when submitting more video frames than * the current FPS setting allows. */ #define VINF_RECORDING_THROTTLED (6907) /** Recording has been throttled due to current settings. * This e.g. can happen when submitting more video frames than * the current FPS setting allows. */ #define VERR_RECORDING_THROTTLED (-6907) /** Encoding data failed. */ #define VERR_RECORDING_ENCODING_FAILED (-6908) /** @} */ /** @name Shared Clipboard Status Codes * @{ */ /** Maximum of concurrent clipboard transfers has been reached. */ #define VERR_SHCLPB_MAX_TRANSFERS_REACHED (-7100) /** Maximum number of Shared Clipboard objects has been reached. */ #define VERR_SHCLPB_MAX_OBJECTS_REACHED (-7101) /** Maximum number of Shared Clipboard lists has been reached. */ #define VERR_SHCLPB_MAX_LISTS_REACHED (-7102) /** A Shared Clipboard list handle is invalid. */ #define VERR_SHCLPB_LIST_HANDLE_INVALID (-7103) /** A Shared Clipboard objects handle is invalid. */ #define VERR_SHCLPB_OBJ_HANDLE_INVALID (-7104) /** Shared Clipboard event ID not found. */ #define VERR_SHCLPB_EVENT_ID_NOT_FOUND (-7105) /** Maximum number of Shared Clipboard events for an event source has been reached. */ #define VERR_SHCLPB_MAX_EVENTS_REACHED (-7106) /** Shared Clipboard transfer ID not found. */ #define VERR_SHCLPB_TRANSFER_ID_NOT_FOUND (-7150) /** Shared Clipboard guest error. */ #define VERR_SHCLPB_GUEST_ERROR (-7151) /** Shared Clipboard event failed error. */ #define VERR_SHCLPB_EVENT_FAILED (-7152) /** @} */ /** @name Virtual IOMMU Status Codes * @{ */ /** Failed to read the device table entry from guest memory. */ #define VERR_IOMMU_DTE_READ_FAILED (-7300) /** Failed to read the device table entry due to an invalid offset. */ #define VERR_IOMMU_DTE_BAD_OFFSET (-7301) /** Address translation failed. */ #define VERR_IOMMU_ADDR_TRANSLATION_FAILED (-7302) /** Access denied for the address. */ #define VERR_IOMMU_ADDR_ACCESS_DENIED (-7303) /** Remapping failed for the interrupt. */ #define VERR_IOMMU_INTR_REMAP_FAILED (-7304) /** Remapping denied for the interrupt (might have caused a PCI target abort). */ #define VERR_IOMMU_INTR_REMAP_DENIED (-7305) /** Command not supported. */ #define VERR_IOMMU_CMD_NOT_SUPPORTED (-7306) /** Command format (or reserved bits) invalid. */ #define VERR_IOMMU_CMD_INVALID_FORMAT (-7307) /** Command hardware failure. */ #define VERR_IOMMU_CMD_HW_ERROR (-7308) /** IOMMU device is not present. */ #define VERR_IOMMU_NOT_PRESENT (-7309) /** IOMMU instance cannot call itself (for remapping interrupts or translating * addresses). */ #define VERR_IOMMU_CANNOT_CALL_SELF (-7310) /** Address translation disabled (but permission bits apply). */ #define VINF_IOMMU_ADDR_TRANSLATION_DISABLED 7311 /** IOMMU Internal processing error \#0. */ #define VERR_IOMMU_IPE_0 (-7390) /** IOMMU Internal processing error \#1. */ #define VERR_IOMMU_IPE_1 (-7391) /** IOMMU Internal processing error \#2. */ #define VERR_IOMMU_IPE_2 (-7392) /** IOMMU Internal processing error \#3. */ #define VERR_IOMMU_IPE_3 (-7393) /** IOMMU Internal processing error \#4. */ #define VERR_IOMMU_IPE_4 (-7394) /** IOMMU Internal processing error \#5. */ #define VERR_IOMMU_IPE_5 (-7395) /** IOMMU Internal processing error \#6. */ #define VERR_IOMMU_IPE_6 (-7396) /** IOMMU Internal processing error \#7. */ #define VERR_IOMMU_IPE_7 (-7397) /** IOMMU Internal processing error \#8. */ #define VERR_IOMMU_IPE_8 (-7398) /** IOMMU Internal processing error \#9. */ #define VERR_IOMMU_IPE_9 (-7399) /** @} */ /** @name Platform Status Codes * @{ */ /** The selected platform architecture is not supported. * Depends on the context (host / VM). */ #define VERR_PLATFORM_ARCH_NOT_SUPPORTED (-7400) /** @} */ /* SED-END */ /** @} */ #endif /* !VBOX_INCLUDED_err_h */