VirtualBox

source: vbox/trunk/include/VBox/err.h@ 11300

Last change on this file since 11300 was 11046, checked in by vboxsync, 16 years ago

Storage: Theoretically functional iSCSI backend.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 58.4 KB
Line 
1/** @file
2 * VirtualBox Status Codes.
3 */
4
5/*
6 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
7 *
8 * This file is part of VirtualBox Open Source Edition (OSE), as
9 * available from http://www.virtualbox.org. This file is free software;
10 * you can redistribute it and/or modify it under the terms of the GNU
11 * General Public License (GPL) as published by the Free Software
12 * Foundation, in version 2 as it comes in the "COPYING" file of the
13 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15 *
16 * The contents of this file may alternatively be used under the terms
17 * of the Common Development and Distribution License Version 1.0
18 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19 * VirtualBox OSE distribution, in which case the provisions of the
20 * CDDL are applicable instead of those of the GPL.
21 *
22 * You may elect to license modified versions of this file under the
23 * terms and conditions of either the GPL or the CDDL or both.
24 *
25 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
26 * Clara, CA 95054 USA or visit http://www.sun.com if you need
27 * additional information or have any questions.
28 */
29
30#ifndef ___VBox_err_h
31#define ___VBox_err_h
32
33#include <VBox/cdefs.h>
34#include <iprt/err.h>
35
36
37/** @defgroup grp_err Error Codes
38 * @{
39 */
40
41/* SED-START */
42
43/** @name Misc. Status Codes
44 * @{
45 */
46/** Failed to allocate VM memory. */
47#define VERR_NO_VM_MEMORY (-1000)
48/** GC is toasted and the VMM should be terminated at once, but no need to panic about it :-) */
49#define VERR_DONT_PANIC (-1001)
50/** Unsupported CPU. */
51#define VERR_UNSUPPORTED_CPU (-1002)
52/** Unsupported CPU mode. */
53#define VERR_UNSUPPORTED_CPU_MODE (-1003)
54/** Page not present. */
55#define VERR_PAGE_NOT_PRESENT (-1004)
56/** Invalid/Corrupted configuration file. */
57#define VERR_CFG_INVALID_FORMAT (-1005)
58/** No configuration value exists. */
59#define VERR_CFG_NO_VALUE (-1006)
60/** Not selector not present. */
61#define VERR_SELECTOR_NOT_PRESENT (-1007)
62/** Not code selector. */
63#define VERR_NOT_CODE_SELECTOR (-1008)
64/** Not data selector. */
65#define VERR_NOT_DATA_SELECTOR (-1009)
66/** Out of selector bounds. */
67#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
68/** Invalid selector. Usually beyond table limits. */
69#define VERR_INVALID_SELECTOR (-1011)
70/** Invalid requested privilegde level. */
71#define VERR_INVALID_RPL (-1012)
72/** PML4 entry not present. */
73#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
74/** Page directory pointer not present. */
75#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
76/** @} */
77
78
79/** @name Execution Monitor/Manager (EM) Status Codes
80 *
81 * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
82 * are of vital importance. The lower the number the higher importance
83 * as a scheduling instruction.
84 * @{
85 */
86/** First scheduling related status code. */
87#define VINF_EM_FIRST 1100
88/** Indicating that the VM is being terminated and that the the execution
89 * shall stop. */
90#define VINF_EM_TERMINATE 1100
91/** Hypervisor code was stepped.
92 * EM will first send this to the debugger, and if the issue isn't
93 * resolved there it will enter guru meditation. */
94#define VINF_EM_DBG_HYPER_STEPPED 1101
95/** Hit a breakpoint in the hypervisor code,
96 * EM will first send this to the debugger, and if the issue isn't
97 * resolved there it will enter guru meditation. */
98#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
99/** Hit a possible assertion in the hypervisor code,
100 * EM will first send this to the debugger, and if the issue isn't
101 * resolved there it will enter guru meditation. */
102#define VINF_EM_DBG_HYPER_ASSERTION 1103
103/** Indicating that the VM should be suspended for debugging because
104 * the developer wants to inspect the VM state. */
105#define VINF_EM_DBG_STOP 1104
106/** Indicating success single stepping and that EM should report that
107 * event to the debugger. */
108#define VINF_EM_DBG_STEPPED 1105
109/** Indicating that a breakpoint was hit and that EM should notify the debugger
110 * and in the event there is no debugger fail fatally. */
111#define VINF_EM_DBG_BREAKPOINT 1106
112/** Indicating that EM should single step an instruction.
113 * The instruction is stepped in the current execution mode (RAW/REM). */
114#define VINF_EM_DBG_STEP 1107
115/** Indicating that the VM is being turned off and that the EM should
116 * exit to the VM awaiting the destruction request. */
117#define VINF_EM_OFF 1108
118/** Indicating that the VM has been reset and that scheduling goes
119 * back to startup defaults. */
120#define VINF_EM_RESET 1109
121/** Indicating that the VM has been suspended and that the the thread
122 * should wait for request telling it what to do next. */
123#define VINF_EM_SUSPEND 1110
124/** Indicating that the VM has executed a halt instruction and that
125 * the emulation thread should wait for an interrupt before resuming
126 * execution. */
127#define VINF_EM_HALT 1111
128/** Indicating that the VM has been resumed and that the thread should
129 * start executing. */
130#define VINF_EM_RESUME 1112
131/** Indicating that we've got an out-of-memory condition and that we need
132 * to take the appropriate actions to deal with this.
133 * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
134 * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
135 * vital to correctly operating the VM. Also, they can't normally occur together
136 * with an out-of-memory condition, and even if that should happen the condition
137 * will be rediscovered before executing any more code. */
138#define VINF_EM_NO_MEMORY 1113
139/** The fatal variant of VINF_EM_NO_MEMORY. */
140#define VERR_EM_NO_MEMORY (-1113)
141/** Indicating that a rescheduling to recompiled execution.
142 * Typically caused by raw-mode executing code which is difficult/slow
143 * to virtualize rawly.
144 * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
145#define VINF_EM_RESCHEDULE_REM 1114
146/** Indicating that a rescheduling to vmx-mode execution.
147 * Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
148#define VINF_EM_RESCHEDULE_HWACC 1115
149/** Indicating that a rescheduling to raw-mode execution.
150 * Typically caused by REM detecting that raw-mode execution is possible.
151 * @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
152#define VINF_EM_RESCHEDULE_RAW 1116
153/** Indicating that a rescheduling now is required. Typically caused by
154 * interrupts having changed the EIP. */
155#define VINF_EM_RESCHEDULE 1117
156/** Last scheduling related status code. (inclusive) */
157#define VINF_EM_LAST 1117
158
159/** Reason for leaving GC: Guest trap which couldn't be handled in GC.
160 * The trap is generally forwared to the REM and executed there. */
161#define VINF_EM_RAW_GUEST_TRAP 1120
162/** Reason for leaving GC: Interrupted by external interrupt.
163 * The interrupt needed to be handled by the host OS. */
164#define VINF_EM_RAW_INTERRUPT 1121
165/** Reason for leaving GC: Interrupted by external interrupt while in hypervisor code.
166 * The interrupt needed to be handled by the host OS and hypervisor execution must be
167 * resumed. VM state is not complete at this point. */
168#define VINF_EM_RAW_INTERRUPT_HYPER 1122
169/** Reason for leaving GC: A Ring switch was attempted.
170 * Normal cause of action is to execute this in REM. */
171#define VINF_EM_RAW_RING_SWITCH 1123
172/** Reason for leaving GC: A Ring switch was attempted using software interrupt.
173 * Normal cause of action is to execute this in REM. */
174#define VINF_EM_RAW_RING_SWITCH_INT 1124
175/** Reason for leaving GC: A privileged instruction was attempted executed.
176 * Normal cause of action is to execute this in REM. */
177#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1125
178
179/** Reason for leaving GC: Emulate instruction. */
180#define VINF_EM_RAW_EMULATE_INSTR 1126
181/** Reason for leaving GC: Unhandled TSS write.
182 * Recompiler gets control. */
183#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1127
184/** Reason for leaving GC: Unhandled LDT write.
185 * Recompiler gets control. */
186#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1128
187/** Reason for leaving GC: Unhandled IDT write.
188 * Recompiler gets control. */
189#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1129
190/** Reason for leaving GC: Unhandled GDT write.
191 * Recompiler gets control. */
192#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1130
193/** Reason for leaving GC: Unhandled Page Directory write.
194 * Recompiler gets control. */
195#define VINF_EM_RAW_EMULATE_INSTR_PD_FAULT 1131
196/** Reason for leaving GC: jump inside generated patch jump.
197 * Fatal error. */
198#define VERR_EM_RAW_PATCH_CONFLICT (-1132)
199/** Reason for leaving GC: Hlt instruction.
200 * Recompiler gets control. */
201#define VINF_EM_RAW_EMULATE_INSTR_HLT 1133
202/** Reason for leaving GC: Ring-3 operation pending. */
203#define VINF_EM_RAW_TO_R3 1134
204/** Reason for leaving GC: Timer pending. */
205#define VINF_EM_RAW_TIMER_PENDING 1135
206/** Reason for leaving GC: Interrupt pending (guest). */
207#define VINF_EM_RAW_INTERRUPT_PENDING 1136
208/** Reason for leaving GC: Encountered a stale selector. */
209#define VINF_EM_RAW_STALE_SELECTOR 1137
210/** Reason for leaving GC: The IRET resuming guest code trapped. */
211#define VINF_EM_RAW_IRET_TRAP 1138
212/** The interpreter was unable to deal with the instruction at hand. */
213#define VERR_EM_INTERPRETER (-1148)
214/** Internal EM error caused by an unknown warning or informational status code. */
215#define VERR_EM_INTERNAL_ERROR (-1149)
216/** Pending VM request packet. */
217#define VINF_EM_PENDING_REQUEST (-1150)
218/** @} */
219
220
221/** @name Debugging Facility (DBGF) DBGF Status Codes
222 * @{
223 */
224/** The function called requires the caller to be attached as a
225 * debugger to the VM. */
226#define VERR_DBGF_NOT_ATTACHED (-1200)
227/** Someone (including the caller) was already attached as
228 * debugger to the VM. */
229#define VERR_DBGF_ALREADY_ATTACHED (-1201)
230/** Tried to hald a debugger which was already halted.
231 * (This is a warning and not an error.) */
232#define VWRN_DBGF_ALREADY_HALTED 1202
233/** The DBGF has no more free breakpoint slots. */
234#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
235/** The DBGF couldn't find the specified breakpoint. */
236#define VERR_DBGF_BP_NOT_FOUND (-1204)
237/** Attempted to enabled a breakpoint which was already enabled. */
238#define VINF_DBGF_BP_ALREADY_ENABLED 1205
239/** Attempted to disabled a breakpoint which was already disabled. */
240#define VINF_DBGF_BP_ALREADY_DISABLED 1206
241/** The breakpoint already exists. */
242#define VINF_DBGF_BP_ALREADY_EXIST 1207
243/** The byte string was not found. */
244#define VERR_DBGF_MEM_NOT_FOUND (-1208)
245/** The OS was not detected. */
246#define VERR_DBGF_OS_NOT_DETCTED (-1209)
247/** The OS was not detected. */
248#define VINF_DBGF_OS_NOT_DETCTED 1209
249/** @} */
250
251
252/** @name Patch Manager (PATM) Status Codes
253 * @{
254 */
255/** Non fatal Patch Manager analysis phase warning */
256#define VWRN_CONTINUE_ANALYSIS 1400
257/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
258#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
259/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
260#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
261/** Patch installation refused (patch too complex or unsupported instructions ) */
262#define VERR_PATCHING_REFUSED (-1401)
263/** Unable to find patch */
264#define VERR_PATCH_NOT_FOUND (-1402)
265/** Patch disabled */
266#define VERR_PATCH_DISABLED (-1403)
267/** Patch enabled */
268#define VWRN_PATCH_ENABLED 1404
269/** Patch was already disabled */
270#define VERR_PATCH_ALREADY_DISABLED (-1405)
271/** Patch was already enabled */
272#define VERR_PATCH_ALREADY_ENABLED (-1406)
273/** Patch was removed. */
274#define VWRN_PATCH_REMOVED 1408
275
276/** Reason for leaving GC: \#GP with EIP pointing to patch code. */
277#define VINF_PATM_PATCH_TRAP_GP 1408
278/** First leave GC code. */
279#define VINF_PATM_LEAVEGC_FIRST VINF_PATM_PATCH_TRAP_GP
280/** Reason for leaving GC: \#PF with EIP pointing to patch code. */
281#define VINF_PATM_PATCH_TRAP_PF 1409
282/** Reason for leaving GC: int3 with EIP pointing to patch code. */
283#define VINF_PATM_PATCH_INT3 1410
284/** Reason for leaving GC: \#PF for monitored patch page. */
285#define VINF_PATM_CHECK_PATCH_PAGE 1411
286/** Reason for leaving GC: duplicate instruction called at current eip. */
287#define VINF_PATM_DUPLICATE_FUNCTION 1412
288/** Execute one instruction with the recompiler */
289#define VINF_PATCH_EMULATE_INSTR 1413
290/** Reason for leaving GC: attempt to patch MMIO write. */
291#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
292/** Reason for leaving GC: attempt to patch MMIO read. */
293#define VINF_PATM_HC_MMIO_PATCH_READ 1415
294/** Reason for leaving GC: pending irq after iret that sets IF. */
295#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
296/** Last leave GC code. */
297#define VINF_PATM_LEAVEGC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
298
299/** No conflicts to resolve */
300#define VERR_PATCH_NO_CONFLICT (-1425)
301/** Detected unsafe code for patching */
302#define VERR_PATM_UNSAFE_CODE (-1426)
303/** Terminate search branch */
304#define VWRN_PATCH_END_BRANCH 1427
305/** Already patched */
306#define VERR_PATM_ALREADY_PATCHED (-1428)
307/** Spinlock detection failed. */
308#define VINF_PATM_SPINLOCK_FAILED (1429)
309/** Continue execution after patch trap. */
310#define VINF_PATCH_CONTINUE (1430)
311
312/** @} */
313
314
315/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
316 * @{
317 */
318/** Trap not handled */
319#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
320/** Patch installed */
321#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
322/** Page record not found */
323#define VWRN_CSAM_PAGE_NOT_FOUND 1502
324/** Reason for leaving GC: CSAM wants perform a task in ring-3. */
325#define VINF_CSAM_PENDING_ACTION 1503
326/** @} */
327
328
329/** @name Page Monitor/Manager (PGM) Status Codes
330 * @{
331 */
332/** Attempt to create a GC mapping which conflicts with an existing mapping. */
333#define VERR_PGM_MAPPING_CONFLICT (-1600)
334/** The physical handler range has no corresponding RAM range.
335 * If this is MMIO, see todo above the return. If not MMIO, then it's
336 * someone else's fault... */
337#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
338/** Attempt to register an access handler for a virtual range of which a part
339 * was already handled. */
340#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
341/** Attempt to register an access handler for a physical range of which a part
342 * was already handled. */
343#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
344/** Invalid page directory specified to PGM. */
345#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
346/** Invalid GC physical address. */
347#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
348/** Invalid GC physical range. Usually used when a specified range crosses
349 * a RAM region boundrary. */
350#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
351/** Specified access handler was not found. */
352#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
353/** Attempt to register a RAM range of which parts are already
354 * covered by existing RAM ranges. */
355#define VERR_PGM_RAM_CONFLICT (-1608)
356/** Failed to add new mappings because the current mappings are fixed
357 * in guest os memory. */
358#define VERR_PGM_MAPPINGS_FIXED (-1609)
359/** Failed to fix mappings because of a conflict with the intermediate code. */
360#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
361/** Failed to fix mappings because a mapping rejected the address. */
362#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
363/** Failed to fix mappings because the proposed memory area was to small. */
364#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
365/** Reason for leaving GC: The urge to syncing CR3. */
366#define VINF_PGM_SYNC_CR3 1613
367/** Page not marked for dirty bit tracking */
368#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
369/** Page fault caused by dirty bit tracking; corrected */
370#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
371/** Go ahead with the default Read/Write operation.
372 * This is returned by a HC physical or virtual handler when it wants the PGMPhys[Read|Write]
373 * routine do the reading/writing. */
374#define VINF_PGM_HANDLER_DO_DEFAULT 1616
375/** The paging mode of the host is not supported yet. */
376#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
377/** The physical guest page is a reserved/mmio page and does not have any HC address. */
378#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
379/** No page directory available for the hypervisor. */
380#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
381/** The shadow page pool was flushed.
382 * This means that a global CR3 sync was flagged. Anyone receiving this kind of status
383 * will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */
384#define VERR_PGM_POOL_FLUSHED (-1620)
385/** The shadow page pool was cleared.
386 * This is a error code internal to the shadow page pool, it will be
387 * converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */
388#define VERR_PGM_POOL_CLEARED (-1621)
389/** The returned shadow page is cached. */
390#define VINF_PGM_CACHED_PAGE 1622
391/** Returned by handler registration, modification and deregistration
392 * when the shadow PTs could be updated because the guest page
393 * aliased or/and mapped by multiple PTs. */
394#define VINF_PGM_GCPHYS_ALIASED 1623
395/** Reason for leaving GC: Paging mode changed.
396 * PGMChangeMode() uses this to force a switch to HC so it can safely
397 * deal with a mode switch.
398 */
399#define VINF_PGM_CHANGE_MODE 1624
400/** SyncPage modified the PDE.
401 * This is an internal status code used to communicate back to the \#PF handler
402 * that the PDE was (probably) marked not-present and it should restart the instruction. */
403#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
404/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
405#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
406/** Conflict between the core memory and the intermediate paging context, try again.
407 * There are some very special conditions applying to the intermediate paging context
408 * (used during the world switches), and some times we continuously run into these
409 * when asking the host kernel for memory during VM init. Let us know if you run into
410 * this and we'll adjust the code so it tries harder to avoid it.
411 */
412#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
413/** The shadow paging mode is not supported yet. */
414#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
415
416/** @} */
417
418
419/** @name Memory Monitor (MM) Status Codes
420 * @{
421 */
422/** Attempt to register a RAM range of which parts are already
423 * covered by existing RAM ranges. */
424#define VERR_MM_RAM_CONFLICT (-1700)
425/** Hypervisor memory allocation failed. */
426#define VERR_MM_HYPER_NO_MEMORY (-1701)
427
428/** @} */
429
430
431/** @name Save State Manager (SSM) Status Codes
432 * @{
433 */
434/** The specified data unit already exist. */
435#define VERR_SSM_UNIT_EXISTS (-1800)
436/** The specified data unit wasn't found. */
437#define VERR_SSM_UNIT_NOT_FOUND (-1801)
438/** The specified data unit wasn't owned by caller. */
439#define VERR_SSM_UNIT_NOT_OWNER (-1802)
440/** General saved state file integrity error. */
441#define VERR_SSM_INTEGRITY (-1810)
442/** The saved state file magic was not recognized. */
443#define VERR_SSM_INTEGRITY_MAGIC (-1811)
444/** The saved state file version is not supported. */
445#define VERR_SSM_INTEGRITY_VERSION (-1812)
446/** The saved state file size didn't match the one in the header. */
447#define VERR_SSM_INTEGRITY_SIZE (-1813)
448/** The CRC of the saved state file did match. */
449#define VERR_SSM_INTEGRITY_CRC (-1814)
450/** The current virtual machine id didn't match the virtual machine id. */
451#define VERR_SMM_INTEGRITY_MACHINE (-1815)
452/** Invalid unit magic (internal data tag). */
453#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1816)
454/** The file contained a data unit which no-one wants. */
455#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1817)
456/** A data unit in the saved state file was defined but didn't any
457 * routine for processing it. */
458#define VERR_SSM_NO_LOAD_EXEC (-1818)
459/** A restore routine attempted to load more data then the unit contained. */
460#define VERR_SSM_LOADED_TOO_MUCH (-1819)
461/** Not in the correct state for the attempted operation. */
462#define VERR_SSM_INVALID_STATE (-1820)
463
464/** Unsupported data unit version.
465 * A SSM user returns this if it doesn't know the u32Version. */
466#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1821)
467/** The format of a data unit has changed.
468 * A SSM user returns this if it's not able to read the format for
469 * other reasons than u32Version. */
470#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1822)
471/** The CPUID instruction returns different information when loading than when saved.
472 * Normally caused by hardware changes on the host, but could also be caused by
473 * changes in the BIOS setup. */
474#define VERR_SSM_LOAD_CPUID_MISMATCH (-1823)
475/** The RAM size differes between the saved state and the VM config. */
476#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1824)
477/** The state doesn't match the VM configuration in one or another way.
478 * (There are certain PCI reconfiguration which the OS could potentially
479 * do which can cause this problem. Check this out when it happens.) */
480#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1825)
481/** The virtual clock freqency differs too much.
482 * The clock source for the virtual time isn't reliable or the code have changed. */
483#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1826)
484/** A timeout occured while waiting for async IDE operations to finish. */
485#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1827)
486/** One of the structure magics was wrong. */
487#define VERR_SSM_STRUCTURE_MAGIC (-1828)
488/** The data in the saved state doesn't confirm to expectations. */
489#define VERR_SSM_UNEXPECTED_DATA (-1829)
490/** @} */
491
492
493/** @name Virtual Machine (VM) Status Codes
494 * @{
495 */
496/** The specified at reset handler wasn't found. */
497#define VERR_VM_ATRESET_NOT_FOUND (-1900)
498/** Invalid VM request type.
499 * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
500 * all the other occurences it means indicates corruption, broken logic, or stupid
501 * interface user. */
502#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
503/** Invalid VM request state.
504 * The state of the request packet was not the expected and accepted one(s). Either
505 * the interface user screwed up, or we've got corruption/broken logic. */
506#define VERR_VM_REQUEST_STATE (-1902)
507/** Invalid VM request packet.
508 * One or more of the the VM controlled packet members didn't contain the correct
509 * values. Some thing's broken. */
510#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
511/** The status field has not been updated yet as the request is still
512 * pending completion. Someone queried the iStatus field before the request
513 * has been fully processed. */
514#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
515/** The request has been freed, don't read the status now.
516 * Someone is reading the iStatus field of a freed request packet. */
517#define VERR_VM_REQUEST_STATUS_FREED (-1905)
518/** A VM api requiring EMT was called from another thread.
519 * Use the VMR3ReqCall() apis to call it! */
520#define VERR_VM_THREAD_NOT_EMT (-1906)
521/** The VM state was invalid for the requested operation.
522 * Go check the 'VM Statechart Diagram.gif'. */
523#define VERR_VM_INVALID_VM_STATE (-1907)
524/** The support driver is not installed.
525 * On linux, open returned ENOENT. */
526#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
527/** The support driver is not accessible.
528 * On linux, open returned EPERM. */
529#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
530/** Was not able to load the support driver.
531 * On linux, open returned ENODEV. */
532#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
533/** Was not able to open the support driver.
534 * Generic open error used when none of the other ones fit. */
535#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
536/** The installed support driver doesn't match the version of the user. */
537#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
538/** Saving the VM state is temporarily not allowed. Try again later. */
539#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
540/** @} */
541
542
543/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
544 * @{
545 */
546/** Successful completion of operation (mapped to generic iprt status code). */
547#define VINF_VRDP_SUCCESS VINF_SUCCESS
548/** VRDP transport operation timed out (mapped to generic iprt status code). */
549#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
550
551/** Unsupported ISO protocol feature */
552#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
553/** Security (en/decryption) engine error */
554#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
555/** VRDP protocol violation */
556#define VERR_VRDP_PROTOCOL_ERROR (-2002)
557/** Unsupported VRDP protocol feature */
558#define VERR_VRDP_NOT_SUPPORTED (-2003)
559/** VRDP protocol violation, client sends less data than expected */
560#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
561/** Internal error, VRDP packet is in wrong operation mode */
562#define VERR_VRDP_INVALID_MODE (-2005)
563/** Memory allocation failed */
564#define VERR_VRDP_NO_MEMORY (-2006)
565/** Client has been rejected */
566#define VERR_VRDP_ACCESS_DENIED (-2007)
567/** VRPD receives a packet that is not supported */
568#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
569/** VRDP script allowed the packet to be processed further */
570#define VINF_VRDP_PROCESS_PDU 2009
571/** VRDP script has completed its task */
572#define VINF_VRDP_OPERATION_COMPLETED 2010
573/** VRDP thread has started OK and will run */
574#define VINF_VRDP_THREAD_STARTED 2011
575/** Framebuffer is resized, terminate send bitmap procedure */
576#define VINF_VRDP_RESIZE_REQUESTED 2012
577/** Output can be enabled for the client. */
578#define VINF_VRDP_OUTPUT_ENABLE 2013
579/** @} */
580
581
582/** @name Configuration Manager (CFGM) Status Codes
583 * @{
584 */
585/** The integer value was too big for the requested representation. */
586#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
587/** Child node was not found. */
588#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
589/** Path to child node was invalid (i.e. empty). */
590#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
591/** Value not found. */
592#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
593/** No parent node specified. */
594#define VERR_CFGM_NO_PARENT (-2104)
595/** No node was specified. */
596#define VERR_CFGM_NO_NODE (-2105)
597/** The value is not an integer. */
598#define VERR_CFGM_NOT_INTEGER (-2106)
599/** The value is not a zero terminated character string. */
600#define VERR_CFGM_NOT_STRING (-2107)
601/** The value is not a byte string. */
602#define VERR_CFGM_NOT_BYTES (-2108)
603/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
604#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
605/** The path of a new node contained slashs or was empty. */
606#define VERR_CFGM_INVALID_NODE_PATH (-2160)
607/** A new node couldn't be inserted because one with the same name exists. */
608#define VERR_CFGM_NODE_EXISTS (-2161)
609/** A new leaf couldn't be inserted because one with the same name exists. */
610#define VERR_CFGM_LEAF_EXISTS (-2162)
611/** @} */
612
613
614/** @name Time Manager (TM) Status Codes
615 * @{
616 */
617/** The loaded timer state was incorrect. */
618#define VERR_TM_LOAD_STATE (-2200)
619/** The timer was not in the correct state for the request operation. */
620#define VERR_TM_INVALID_STATE (-2201)
621/** The timer was in a unknown state. Corruption or stupid coding error. */
622#define VERR_TM_UNKNOWN_STATE (-2202)
623/** The timer was stuck in an unstable state until we grew impatient and returned. */
624#define VERR_TM_UNSTABLE_STATE (-2203)
625/** @} */
626
627
628/** @name Recompiled Execution Manager (REM) Status Codes
629 * @{
630 */
631/** Fatal error in virtual hardware. */
632#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
633/** Fatal error in the recompiler cpu. */
634#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
635/** Recompiler execution was interrupted by forced action. */
636#define VINF_REM_INTERRUPED_FF 2302
637/** Reason for leaving GC: Must flush pending invlpg operations to REM.
638 * Tell REM to flush page invalidations. Will temporary go to REM context
639 * from REM and perform the flushes. */
640#define VERR_REM_FLUSHED_PAGES_OVERFLOW (-2303)
641/** Too many similar traps. This is a very useful debug only
642 * check (we don't do double/tripple faults in REM). */
643#define VERR_REM_TOO_MANY_TRAPS (-2304)
644/** The REM is out of breakpoint slots. */
645#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
646/** The REM could not find any breakpoint on the specified address. */
647#define VERR_REM_BP_NOT_FOUND (-2306)
648/** @} */
649
650
651/** @name Trap Manager / Monitor (TRPM) Status Codes
652 * @{
653 */
654/** No active trap. Cannot query or reset a non-existing trap. */
655#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
656/** Active trap. Cannot assert a new trap when when one is already active. */
657#define VERR_TRPM_ACTIVE_TRAP (-2401)
658/** Reason for leaving GC: Guest tried to write to our IDT - fatal.
659 * The VM will be terminated assuming the worst, i.e. that the
660 * guest has read the idtr register. */
661#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
662/** Reason for leaving GC: Fatal trap in hypervisor. */
663#define VERR_TRPM_DONT_PANIC (-2403)
664/** Reason for leaving GC: Double Fault. */
665#define VERR_TRPM_PANIC (-2404)
666/** The exception was dispatched for raw-mode execution. */
667#define VINF_TRPM_XCPT_DISPATCHED 2405
668/** @} */
669
670
671/** @name Selector Manager / Monitor (SELM) Status Code
672 * @{
673 */
674/** Reason for leaving GC: Guest tried to write to our GDT - fatal.
675 * The VM will be terminated assuming the worst, i.e. that the
676 * guest has read the gdtr register. */
677#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
678/** Reason for leaving GC: Guest tried to write to our LDT - fatal.
679 * The VM will be terminated assuming the worst, i.e. that the
680 * guest has read the ldtr register. */
681#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
682/** Reason for leaving GC: Guest tried to write to our TSS - fatal.
683 * The VM will be terminated assuming the worst, i.e. that the
684 * guest has read the ltr register. */
685#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
686/** Reason for leaving GC: Sync the GDT table to solve a conflict. */
687#define VINF_SELM_SYNC_GDT 2503
688/** No valid TSS present. */
689#define VERR_SELM_NO_TSS (-2504)
690/** @} */
691
692
693/** @name I/O Manager / Monitor (IOM) Status Code
694 * @{
695 */
696/** The specified I/O port range was invalid.
697 * It was either empty or it was out of bounds. */
698#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
699/** The specified GC I/O port range didn't have a corresponding HC range.
700 * IOMIOPortRegisterHC() must be called before IOMIOPortRegisterGC(). */
701#define VERR_IOM_NO_HC_IOPORT_RANGE (-2601)
702/** The specified I/O port range intruded on an existing range. There is
703 * a I/O port conflict between two device, or a device tried to register
704 * the same range twice. */
705#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
706/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
707#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
708/** The specified I/O port range was owned by some other device(s). Both registration
709 * and deregistration, but in the first case only GC ranges. */
710#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
711
712/** The specified MMIO range was invalid.
713 * It was either empty or it was out of bounds. */
714#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
715/** The specified GC MMIO range didn't have a corresponding HC range.
716 * IOMMMIORegisterHC() must be called before IOMMMIORegisterGC(). */
717#define VERR_IOM_NO_HC_MMIO_RANGE (-2606)
718/** The specified MMIO range was owned by some other device(s). Both registration
719 * and deregistration, but in the first case only GC ranges. */
720#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
721/** The specified MMIO range intruded on an existing range. There is
722 * a MMIO conflict between two device, or a device tried to register
723 * the same range twice. */
724#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
725/** The MMIO range specified for removal was not found. */
726#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
727/** The MMIO range specified for removal was invalid. The range didn't match
728 * quite match a set of existing ranges. It's not possible to remove parts of
729 * a MMIO range, only one or more full ranges. */
730#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
731/** An invalid I/O port size was specified for a read or write operation. */
732#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
733/** The MMIO handler was called for a bogus address! Internal error! */
734#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
735/** The MMIO handler experienced a problem with the disassembler. */
736#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
737/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
738#define VERR_IOM_IOPORT_UNUSED (-2614)
739/** Unused MMIO register read, fill with 00. */
740#define VINF_IOM_MMIO_UNUSED_00 2615
741/** Unused MMIO register read, fill with FF. */
742#define VINF_IOM_MMIO_UNUSED_FF 2616
743
744/** Reason for leaving GC: I/O port read. */
745#define VINF_IOM_HC_IOPORT_READ 2620
746/** Reason for leaving GC: I/O port write. */
747#define VINF_IOM_HC_IOPORT_WRITE 2621
748/** Reason for leaving GC: MMIO write. */
749#define VINF_IOM_HC_MMIO_READ 2623
750/** Reason for leaving GC: MMIO read. */
751#define VINF_IOM_HC_MMIO_WRITE 2624
752/** Reason for leaving GC: MMIO read/write. */
753#define VINF_IOM_HC_MMIO_READ_WRITE 2625
754/** @} */
755
756
757/** @name Virtual Machine Monitor (VMM) Status Codes
758 * @{
759 */
760/** Reason for leaving GC: Calling host function. */
761#define VINF_VMM_CALL_HOST 2700
762/** @} */
763
764
765/** @name Pluggable Device and Driver Manager (PDM) Status Codes
766 * @{
767 */
768/** An invalid LUN specification was given. */
769#define VERR_PDM_NO_SUCH_LUN (-2800)
770/** A device encountered an unknown configuration value.
771 * This means that the device is potentially misconfigured and the device
772 * construction or unit attachment failed because of this. */
773#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
774/** The above driver doesn't export a interface required by a driver being
775 * attached to it. Typical misconfiguration problem. */
776#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
777/** The below driver doesn't export a interface required by the drive
778 * having attached it. Typical misconfiguration problem. */
779#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
780/** A device didn't find a required interface with an attached driver.
781 * Typical misconfiguration problem. */
782#define VERR_PDM_MISSING_INTERFACE (-2804)
783/** A driver encountered an unknown configuration value.
784 * This means that the driver is potentially misconfigured and the driver
785 * construction failed because of this. */
786#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
787/** The PCI bus assigned to a device didn't have room for it.
788 * Either too many devices are configured on the same PCI bus, or there are
789 * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
790#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
791/** A queue is out of free items, the queueing operation failed. */
792#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
793/** Not possible to attach further drivers to the driver.
794 * A driver which doesn't support attachments (below of course) will
795 * return this status code if it found that further drivers were configured
796 * to be attached to it. */
797#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
798/** Not possible to attach drivers to the device.
799 * A device which doesn't support attachments (below of course) will
800 * return this status code if it found that drivers were configured
801 * to be attached to it. */
802#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
803/** No attached driver.
804 * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
805 * this error when no driver was configured to be attached. */
806#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
807/** The media geometry hasn't been set yet, so it cannot be obtained.
808 * The caller should then calculate the geometry from the media size. */
809#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
810/** The media translation hasn't been set yet, so it cannot be obtained.
811 * The caller should then guess the translation. */
812#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
813/** The media is not mounted, operation requires a mounted media. */
814#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
815/** Mount failed because a media was already mounted. Unmount the media
816 * and retry the mount. */
817#define VERR_PDM_MEDIA_MOUNTED (-2814)
818/** The media is locked and cannot be unmounted. */
819#define VERR_PDM_MEDIA_LOCKED (-2815)
820/** No 'Type' attribute in the DrvBlock configuration.
821 * Misconfiguration. */
822#define VERR_PDM_BLOCK_NO_TYPE (-2816)
823/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
824 * Misconfiguration. */
825#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
826/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
827 * Misconfiguration. */
828#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
829/** The block driver type wasn't supported.
830 * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
831#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
832/** A attach or prepare mount call failed because the driver already
833 * had a driver attached. */
834#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
835/** An attempt on deattaching a driver without anyone actually being attached, or
836 * performing any other operation on an attached driver. */
837#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
838/** The attached driver configuration is missing the 'Driver' attribute. */
839#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
840/** The configured driver wasn't found.
841 * Either the necessary driver modules wasn't loaded, the name was
842 * misspelled, or it was a misconfiguration. */
843#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
844/** The Ring-3 module was already loaded. */
845#define VINF_PDM_ALREADY_LOADED (2824)
846/** The name of the module clashed with an existing module. */
847#define VERR_PDM_MODULE_NAME_CLASH (-2825)
848/** Couldn't find any export for registration of drivers/devices. */
849#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
850/** A module name is too long. */
851#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
852/** Driver name clash. Another driver with the same name as the
853 * one begin registred exists. */
854#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
855/** The version of the driver registration structure is unknown
856 * to this VBox version. Either mixing incompatible versions or
857 * the structure isn't correctly initialized. */
858#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
859/** Invalid entry in the driver registration structure. */
860#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
861/** Invalid host bit mask. */
862#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
863/** Not possible to detach a driver because the above driver/device
864 * doesn't support it. The above entity doesn't implement the pfnDetach call. */
865#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
866/** No PCI Bus is available to register the device with. This is usually a
867 * misconfiguration or in rare cases a buggy pci device. */
868#define VERR_PDM_NO_PCI_BUS (-2833)
869/** The device is not a registered PCI device and thus cannot
870 * perform any PCI operations. The device forgot to register it self. */
871#define VERR_PDM_NOT_PCI_DEVICE (-2834)
872
873/** The version of the device registration structure is unknown
874 * to this VBox version. Either mixing incompatible versions or
875 * the structure isn't correctly initialized. */
876#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
877/** Invalid entry in the device registration structure. */
878#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
879/** Invalid host bit mask. */
880#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
881/** The guest bit mask didn't match the guest being loaded. */
882#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
883/** Device name clash. Another device with the same name as the
884 * one begin registred exists. */
885#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
886/** The device wasn't found. There was no registered device
887 * by that name. */
888#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
889/** The device instance was not found. */
890#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
891/** The device instance have no base interface. */
892#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
893/** The device instance have no such logical unit. */
894#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
895/** The driver instance could not be found. */
896#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
897/** Logical Unit was not found. */
898#define VERR_PDM_LUN_NOT_FOUND (-2845)
899/** The Logical Unit was found, but it had no driver attached to it. */
900#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
901/** The Logical Unit was found, but it had no driver attached to it. */
902#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
903/** No PIC device instance is registered with the current VM and thus
904 * the PIC operation cannot be performed. */
905#define VERR_PDM_NO_PIC_INSTANCE (-2847)
906/** No APIC device instance is registered with the current VM and thus
907 * the APIC operation cannot be performed. */
908#define VERR_PDM_NO_APIC_INSTANCE (-2848)
909/** No DMAC device instance is registered with the current VM and thus
910 * the DMA operation cannot be performed. */
911#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
912/** No RTC device instance is registered with the current VM and thus
913 * the RTC or CMOS operation cannot be performed. */
914#define VERR_PDM_NO_RTC_INSTANCE (-2850)
915/** Unable to open the host interface due to a sharing violation . */
916#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
917/** Unable to open the host interface. */
918#define VERR_PDM_HIF_OPEN_FAILED (-2852)
919/** The device doesn't support runtime driver attaching.
920 * The PDMDEVREG::pfnAttach callback function is NULL. */
921#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
922/** The device doesn't support runtime driver detaching.
923 * The PDMDEVREG::pfnDetach callback function is NULL. */
924#define VERR_PDM_DEVICE_NO_RT_DETACH (-2854)
925/** Invalid host interface version. */
926#define VERR_PDM_HIF_INVALID_VERSION (-2855)
927
928/** The version of the USB device registration structure is unknown
929 * to this VBox version. Either mixing incompatible versions or
930 * the structure isn't correctly initialized. */
931#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
932/** Invalid entry in the device registration structure. */
933#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
934/** Driver name clash. Another driver with the same name as the
935 * one begin registred exists. */
936#define VERR_PDM_USB_NAME_CLASH (-2858)
937/** The USB hub is already registered. */
938#define VERR_PDM_USB_HUB_EXISTS (-2859)
939/** Couldn't find any USB hubs to attach the device to. */
940#define VERR_PDM_NO_USB_HUBS (-2860)
941/** Couldn't find any free USB ports to attach the device to. */
942#define VERR_PDM_NO_USB_PORTS (-2861)
943/** Couldn't find the USB Proxy device. Using OSE? */
944#define VERR_PDM_NO_USBPROXY (-2862)
945/** The async completion template is still used. */
946#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
947/** The async completion task is already suspended. */
948#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
949/** The async completion task is not suspended. */
950#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
951/** The driver properties were invalid, and as a consequence construction
952 * failed. Caused my unusable media or similar problems. */
953#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
954/** @} */
955
956
957/** @name Host-Guest Communication Manager (HGCM) Status Codes
958 * @{
959 */
960/** Requested service does not exist. */
961#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
962/** Service rejected client connection */
963#define VINF_HGCM_CLIENT_REJECTED 2901
964/** Command address is invalid. */
965#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
966/** Service will execute the command in background. */
967#define VINF_HGCM_ASYNC_EXECUTE 2903
968/** HGCM could not perform requested operation because of an internal error. */
969#define VERR_HGCM_INTERNAL (-2904)
970/** Invalid HGCM client id. */
971#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
972/** The HGCM is saving state. */
973#define VINF_HGCM_SAVE_STATE (2906)
974/** Requested service already exists. */
975#define VERR_HGCM_SERVICE_EXISTS (-2907)
976
977/** @} */
978
979
980/** @name Network Address Translation Driver (DrvNAT) Status Codes
981 * @{
982 */
983/** Failed to find the DNS configured for this machine. */
984#define VINF_NAT_DNS 3000
985/** Failed to convert the specified Guest IP to a binary IP address.
986 * Malformed input. */
987#define VERR_NAT_REDIR_GUEST_IP (-3001)
988/** Failed while setting up a redirector rule.
989 * There probably is a conflict between the rule and some existing
990 * service on the computer. */
991#define VERR_NAT_REDIR_SETUP (-3002)
992/** @} */
993
994
995/** @name HostIF Driver (DrvTUN) Status Codes
996 * @{
997 */
998/** The Host Interface Networking init program failed. */
999#define VERR_HOSTIF_INIT_FAILED (-3100)
1000/** The Host Interface Networking device name is too long. */
1001#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
1002/** The Host Interface Networking name config IOCTL call failed. */
1003#define VERR_HOSTIF_IOCTL (-3102)
1004/** Failed to make the Host Interface Networking handle non-blocking. */
1005#define VERR_HOSTIF_BLOCKING (-3103)
1006/** If a Host Interface Networking filehandle was specified it's not allowed to
1007 * have any init or term programs. */
1008#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
1009/** The Host Interface Networking terminate program failed. */
1010#define VERR_HOSTIF_TERM_FAILED (-3105)
1011/** @} */
1012
1013
1014/** @name VBox HDD Container (VDI) Status Codes
1015 * @{
1016 */
1017/** Invalid image file header. */
1018#define VERR_VDI_INVALID_HEADER (-3200)
1019/** Invalid image file header: invalid signature. */
1020#define VERR_VDI_INVALID_SIGNATURE (-3201)
1021/** Invalid image file header: invalid version. */
1022#define VERR_VDI_UNSUPPORTED_VERSION (-3202)
1023/** Invalid image type. */
1024#define VERR_VDI_INVALID_TYPE (-3203)
1025/** Invalid image flags. */
1026#define VERR_VDI_INVALID_FLAGS (-3204)
1027/** Operation can't be done in current HDD container state. */
1028#define VERR_VDI_INVALID_STATE (-3205)
1029/** Differencing image can't be used with current base image. */
1030#define VERR_VDI_WRONG_DIFF_IMAGE (-3206)
1031/** Two or more images of one HDD has different versions. */
1032#define VERR_VDI_IMAGES_VERSION_MISMATCH (-3207)
1033/** Differencing and parent images can't be used together due to UUID. */
1034#define VERR_VDI_IMAGES_UUID_MISMATCH (-3208)
1035/** No differencing images to commit. */
1036#define VERR_VDI_NO_DIFF_IMAGES (-3209)
1037/** Virtual HDD is not opened. */
1038#define VERR_VDI_NOT_OPENED (-3210)
1039/** Requested image is not opened. */
1040#define VERR_VDI_IMAGE_NOT_FOUND (-3211)
1041/** Image is read-only. */
1042#define VERR_VDI_IMAGE_READ_ONLY (-3212)
1043/** Comment string is too long. */
1044#define VERR_VDI_COMMENT_TOO_LONG (-3213)
1045/** Geometry hasn't been set. */
1046#define VERR_VDI_GEOMETRY_NOT_SET (-3214)
1047/** No data for this block in image. */
1048#define VERR_VDI_BLOCK_FREE (-3215)
1049/** Configuration value not found. */
1050#define VERR_VDI_VALUE_NOT_FOUND (-3216)
1051/** Configuration value is unknown. This indicates misconfiguration. */
1052#define VERR_VDI_UNKNOWN_CFG_VALUES (-3217)
1053/** Asynchronous I/O request finished. */
1054#define VINF_VDI_ASYNC_IO_FINISHED 3218
1055/** Asynchronous I/O is not finished yet. */
1056#define VERR_VDI_ASYNC_IO_IN_PROGRESS (-3219)
1057/** @} */
1058
1059
1060/** @name VBox Guest Library (VBGL) Status Codes
1061 * @{
1062 */
1063/** Library was not initialized. */
1064#define VERR_VBGL_NOT_INITIALIZED (-3300)
1065/** Virtual address was not allocated by the library. */
1066#define VERR_VBGL_INVALID_ADDR (-3301)
1067/** IOCtl to VBoxGuest driver failed. */
1068#define VERR_VBGL_IOCTL_FAILED (-3302)
1069/** @} */
1070
1071
1072/** @name VBox USB (VUSB) Status Codes
1073 * @{
1074 */
1075/** No available ports on the hub.
1076 * This error is returned when a device is attempted created and/or attached
1077 * to a hub which is out of ports. */
1078#define VERR_VUSB_NO_PORTS (-3400)
1079/** The requested operation cannot be performed on a detached USB device. */
1080#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1081/** Failed to allocate memory for a URB. */
1082#define VERR_VUSB_NO_URB_MEMORY (-3402)
1083/** General failure during URB queuing.
1084 * This will go away when the queueing gets proper status code handling. */
1085#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1086/** Device creation failed because the USB device name was not found. */
1087#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1088/** Not permitted to open the USB device.
1089 * The user doesn't have access to the device in the usbfs, check the mount options. */
1090#define VERR_VUSB_USBFS_PERMISSION (-3405)
1091/** The requested operation cannot be performed because the device
1092 * is currently being reset. */
1093#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1094/** @} */
1095
1096
1097/** @name VBox VGA Status Codes
1098 * @{
1099 */
1100/** One of the custom modes was incorrect.
1101 * The format or bit count of the custom mode value is invalid. */
1102#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1103/** The display connector is resizing. */
1104#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1105/** @} */
1106
1107
1108/** @name Internal Networking Status Codes
1109 * @{
1110 */
1111/** The networking interface to filter was not found. */
1112#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
1113/** The networking interface to filter was busy (used by someone). */
1114#define VERR_INTNET_FLT_IF_BUSY (-3601)
1115/** Failed to create or connect to a networking interface filter. */
1116#define VERR_INTNET_FLT_IF_FAILED (-3602)
1117/** The network already exists with a different trunk configuration. */
1118#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
1119/** The network already exists with a different security profile (restricted / public). */
1120#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
1121/** @} */
1122
1123
1124/** @name Support Driver Status Codes
1125 * @{
1126 */
1127/** The component factory was not found. */
1128#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
1129/** The component factories do not support the requested interface. */
1130#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
1131/** @} */
1132
1133
1134/** @name VBox GMM Status Codes
1135 * @{
1136 */
1137/** The GMM is out of pages and needs to be give another chunk of user memory that
1138 * it can lock down and borrow pages from. */
1139#define VERR_GMM_SEED_ME (-3800)
1140/** Unable to allocate more pages from the host system. */
1141#define VERR_GMM_OUT_OF_MEMORY (-3801)
1142/** Hit the global allocation limit.
1143 * If you know there is still sufficient memory available, try raise the limit. */
1144#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
1145/** Hit the a VM account limit. */
1146#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
1147/** Attempt to free more memory than what was previously allocated. */
1148#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
1149/** Attempted to report too many pages as deflated. */
1150#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
1151/** The page to be freed or updated was not found. */
1152#define VERR_GMM_PAGE_NOT_FOUND (-3806)
1153/** The specified shared page was not actually private. */
1154#define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
1155/** The specified shared page was not actually shared. */
1156#define VERR_GMM_PAGE_NOT_SHARED (-3808)
1157/** The page to be freed was already freed. */
1158#define VERR_GMM_PAGE_ALREADY_FREE (-3809)
1159/** The page to be updated or freed was noted owned by the caller. */
1160#define VERR_GMM_NOT_PAGE_OWNER (-3810)
1161/** The specified chunk was not found. */
1162#define VERR_GMM_CHUNK_NOT_FOUND (-3811)
1163/** The chunk has already been mapped into the process. */
1164#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
1165/** The chunk to be unmapped isn't actually mapped into the process. */
1166#define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
1167/** The reservation or reservation update was declined - too many VMs, too
1168 * little memory, and/or too low GMM configuration. */
1169#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3814)
1170/** @} */
1171
1172
1173/** @name VBox GVM Status Codes
1174 * @{
1175 */
1176/** The GVM is out of VM handle space. */
1177#define VERR_GVM_TOO_MANY_VMS (-3900)
1178/** The EMT thread was not blocked at the time of the call. */
1179#define VINF_GVM_NOT_BLOCKED 3901
1180/** RTThreadYield was called during a GVMMR0ShcedPoll call. */
1181#define VINF_GVM_YIELDED 3902
1182/** @} */
1183
1184
1185/** @name VBox VMX Status Codes
1186 * @{
1187 */
1188/** Invalid VMCS index or write to read-only element. */
1189#define VERR_VMX_INVALID_VMCS_FIELD (-4000)
1190/** Invalid VMCS pointer. */
1191#define VERR_VMX_INVALID_VMCS_PTR (-4001)
1192/** Invalid VMXON pointer. */
1193#define VERR_VMX_INVALID_VMXON_PTR (-4002)
1194/** Generic VMX failure. */
1195#define VERR_VMX_GENERIC (-4003)
1196/** Invalid CPU mode for VMX execution. */
1197#define VERR_VMX_UNSUPPORTED_MODE (-4004)
1198/** Unable to start VM execution. */
1199#define VERR_VMX_UNABLE_TO_START_VM (-4005)
1200/** Unable to resume VM execution. */
1201#define VERR_VMX_UNABLE_TO_RESUME_VM (-4006)
1202/** Unable to switch due to invalid host state. */
1203#define VERR_VMX_INVALID_HOST_STATE (-4007)
1204/** IA32_FEATURE_CONTROL MSR not setup correcty (turn on VMX in the host system BIOS) */
1205#define VERR_VMX_ILLEGAL_FEATURE_CONTROL_MSR (-4008)
1206/** VMX CPU extension not available */
1207#define VERR_VMX_NO_VMX (-4009)
1208/** VMXON failed; possibly because it was already run before */
1209#define VERR_VMX_VMXON_FAILED (-4010)
1210/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
1211#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
1212/** Somebody cleared X86_CR4_VMXE in the CR4 register. */
1213#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
1214/** VT-x features locked or unavailable in MSR. */
1215#define VERR_VMX_MSR_LOCKED_OR_DISABLED (-4013)
1216/** @} */
1217
1218
1219/** @name VBox SVM Status Codes
1220 * @{
1221 */
1222/** Unable to start VM execution. */
1223#define VERR_SVM_UNABLE_TO_START_VM (-4050)
1224/** SVM bit not set in K6_EFER MSR */
1225#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
1226/** SVM CPU extension not available. */
1227#define VERR_SVM_NO_SVM (-4052)
1228/** SVM CPU extension disabled (by BIOS). */
1229#define VERR_SVM_DISABLED (-4053)
1230/** @} */
1231
1232
1233/** @name VBox HWACCM Status Codes
1234 * @{
1235 */
1236/** Unable to start VM execution. */
1237#define VERR_HWACCM_UNKNOWN_CPU (-4100)
1238/** No CPUID support. */
1239#define VERR_HWACCM_NO_CPUID (-4101)
1240/** @} */
1241
1242
1243/** @name VBox Disassembler Status Codes
1244 * @{
1245 */
1246/** Invalid opcode byte(s) */
1247#define VERR_DIS_INVALID_OPCODE (-4200)
1248/** Generic failure during disassembly. */
1249#define VERR_DIS_GEN_FAILURE (-4201)
1250/** @} */
1251
1252
1253/** @name VBox Webservice Status Codes
1254 * @{
1255 */
1256/** Authentication failed (ISessionManager::logon()) */
1257#define VERR_WEB_NOT_AUTHENTICATED (-4300)
1258/** Invalid format of managed object reference */
1259#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
1260/** Invalid session ID in managed object reference */
1261#define VERR_WEB_INVALID_SESSION_ID (-4302)
1262/** Invalid object ID in managed object reference */
1263#define VERR_WEB_INVALID_OBJECT_ID (-4303)
1264/** Unsupported interface for managed object reference */
1265#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
1266/** @} */
1267
1268/* SED-END */
1269
1270
1271/** @def VBOX_SUCCESS
1272 * Check for success.
1273 *
1274 * @returns true if rc indicates success.
1275 * @returns false if rc indicates failure.
1276 *
1277 * @param rc The iprt status code to test.
1278 */
1279#define VBOX_SUCCESS(rc) RT_SUCCESS(rc)
1280
1281/** @def VBOX_FAILURE
1282 * Check for failure.
1283 *
1284 * @returns true if rc indicates failure.
1285 * @returns false if rc indicates success.
1286 *
1287 * @param rc The iprt status code to test.
1288 */
1289#define VBOX_FAILURE(rc) RT_FAILURE(rc)
1290
1291/** @} */
1292
1293
1294#endif
1295
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette