VirtualBox

source: vbox/trunk/include/VBox/err.h@ 16065

Last change on this file since 16065 was 15852, checked in by vboxsync, 16 years ago

Another experiment with limiting the time spent in ring 0.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 61.8 KB
Line 
1/** @file
2 * VirtualBox Status Codes.
3 */
4
5/*
6 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
7 *
8 * This file is part of VirtualBox Open Source Edition (OSE), as
9 * available from http://www.virtualbox.org. This file is free software;
10 * you can redistribute it and/or modify it under the terms of the GNU
11 * General Public License (GPL) as published by the Free Software
12 * Foundation, in version 2 as it comes in the "COPYING" file of the
13 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15 *
16 * The contents of this file may alternatively be used under the terms
17 * of the Common Development and Distribution License Version 1.0
18 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19 * VirtualBox OSE distribution, in which case the provisions of the
20 * CDDL are applicable instead of those of the GPL.
21 *
22 * You may elect to license modified versions of this file under the
23 * terms and conditions of either the GPL or the CDDL or both.
24 *
25 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
26 * Clara, CA 95054 USA or visit http://www.sun.com if you need
27 * additional information or have any questions.
28 */
29
30#ifndef ___VBox_err_h
31#define ___VBox_err_h
32
33#include <VBox/cdefs.h>
34#include <iprt/err.h>
35
36
37/** @defgroup grp_err Error Codes
38 * @{
39 */
40
41/* SED-START */
42
43/** @name Misc. Status Codes
44 * @{
45 */
46/** Failed to allocate VM memory. */
47#define VERR_NO_VM_MEMORY (-1000)
48/** GC is toasted and the VMM should be terminated at once, but no need to panic about it :-) */
49#define VERR_DONT_PANIC (-1001)
50/** Unsupported CPU. */
51#define VERR_UNSUPPORTED_CPU (-1002)
52/** Unsupported CPU mode. */
53#define VERR_UNSUPPORTED_CPU_MODE (-1003)
54/** Page not present. */
55#define VERR_PAGE_NOT_PRESENT (-1004)
56/** Invalid/Corrupted configuration file. */
57#define VERR_CFG_INVALID_FORMAT (-1005)
58/** No configuration value exists. */
59#define VERR_CFG_NO_VALUE (-1006)
60/** Not selector not present. */
61#define VERR_SELECTOR_NOT_PRESENT (-1007)
62/** Not code selector. */
63#define VERR_NOT_CODE_SELECTOR (-1008)
64/** Not data selector. */
65#define VERR_NOT_DATA_SELECTOR (-1009)
66/** Out of selector bounds. */
67#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
68/** Invalid selector. Usually beyond table limits. */
69#define VERR_INVALID_SELECTOR (-1011)
70/** Invalid requested privilegde level. */
71#define VERR_INVALID_RPL (-1012)
72/** PML4 entry not present. */
73#define VERR_PAGE_MAP_LEVEL4_NOT_PRESENT (-1013)
74/** Page directory pointer not present. */
75#define VERR_PAGE_DIRECTORY_PTR_NOT_PRESENT (-1014)
76/** @} */
77
78
79/** @name Execution Monitor/Manager (EM) Status Codes
80 *
81 * The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
82 * are of vital importance. The lower the number the higher importance
83 * as a scheduling instruction.
84 * @{
85 */
86/** First scheduling related status code. */
87#define VINF_EM_FIRST 1100
88/** Indicating that the VM is being terminated and that the the execution
89 * shall stop. */
90#define VINF_EM_TERMINATE 1100
91/** Hypervisor code was stepped.
92 * EM will first send this to the debugger, and if the issue isn't
93 * resolved there it will enter guru meditation. */
94#define VINF_EM_DBG_HYPER_STEPPED 1101
95/** Hit a breakpoint in the hypervisor code,
96 * EM will first send this to the debugger, and if the issue isn't
97 * resolved there it will enter guru meditation. */
98#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
99/** Hit a possible assertion in the hypervisor code,
100 * EM will first send this to the debugger, and if the issue isn't
101 * resolved there it will enter guru meditation. */
102#define VINF_EM_DBG_HYPER_ASSERTION 1103
103/** Indicating that the VM should be suspended for debugging because
104 * the developer wants to inspect the VM state. */
105#define VINF_EM_DBG_STOP 1105
106/** Indicating success single stepping and that EM should report that
107 * event to the debugger. */
108#define VINF_EM_DBG_STEPPED 1106
109/** Indicating that a breakpoint was hit and that EM should notify the debugger
110 * and in the event there is no debugger fail fatally. */
111#define VINF_EM_DBG_BREAKPOINT 1107
112/** Indicating that EM should single step an instruction.
113 * The instruction is stepped in the current execution mode (RAW/REM). */
114#define VINF_EM_DBG_STEP 1108
115/** Indicating that the VM is being turned off and that the EM should
116 * exit to the VM awaiting the destruction request. */
117#define VINF_EM_OFF 1109
118/** Indicating that the VM has been reset and that scheduling goes
119 * back to startup defaults. */
120#define VINF_EM_RESET 1110
121/** Indicating that the VM has been suspended and that the the thread
122 * should wait for request telling it what to do next. */
123#define VINF_EM_SUSPEND 1111
124/** Indicating that the VM has executed a halt instruction and that
125 * the emulation thread should wait for an interrupt before resuming
126 * execution. */
127#define VINF_EM_HALT 1112
128/** Indicating that the VM has been resumed and that the thread should
129 * start executing. */
130#define VINF_EM_RESUME 1113
131/** Indicating that we've got an out-of-memory condition and that we need
132 * to take the appropriate actions to deal with this.
133 * @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
134 * VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
135 * vital to correctly operating the VM. Also, they can't normally occur together
136 * with an out-of-memory condition, and even if that should happen the condition
137 * will be rediscovered before executing any more code. */
138#define VINF_EM_NO_MEMORY 1114
139/** The fatal variant of VINF_EM_NO_MEMORY. */
140#define VERR_EM_NO_MEMORY (-1114)
141/** Indicating that a rescheduling to recompiled execution.
142 * Typically caused by raw-mode executing code which is difficult/slow
143 * to virtualize rawly.
144 * @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
145#define VINF_EM_RESCHEDULE_REM 1115
146/** Indicating that a rescheduling to vmx-mode execution.
147 * Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
148#define VINF_EM_RESCHEDULE_HWACC 1116
149/** Indicating that a rescheduling to raw-mode execution.
150 * Typically caused by REM detecting that raw-mode execution is possible.
151 * @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
152#define VINF_EM_RESCHEDULE_RAW 1117
153/** Indicating that a rescheduling now is required. Typically caused by
154 * interrupts having changed the EIP. */
155#define VINF_EM_RESCHEDULE 1118
156/** PARAV call */
157#define VINF_EM_RESCHEDULE_PARAV 1119
158/** Last scheduling related status code. (inclusive) */
159#define VINF_EM_LAST 1119
160
161/** Reason for leaving GC: Guest trap which couldn't be handled in GC.
162 * The trap is generally forwared to the REM and executed there. */
163#define VINF_EM_RAW_GUEST_TRAP 1121
164/** Reason for leaving GC: Interrupted by external interrupt.
165 * The interrupt needed to be handled by the host OS. */
166#define VINF_EM_RAW_INTERRUPT 1122
167/** Reason for leaving GC: Interrupted by external interrupt while in hypervisor code.
168 * The interrupt needed to be handled by the host OS and hypervisor execution must be
169 * resumed. VM state is not complete at this point. */
170#define VINF_EM_RAW_INTERRUPT_HYPER 1123
171/** Reason for leaving GC: A Ring switch was attempted.
172 * Normal cause of action is to execute this in REM. */
173#define VINF_EM_RAW_RING_SWITCH 1124
174/** Reason for leaving GC: A Ring switch was attempted using software interrupt.
175 * Normal cause of action is to execute this in REM. */
176#define VINF_EM_RAW_RING_SWITCH_INT 1125
177/** Reason for leaving GC: A privileged instruction was attempted executed.
178 * Normal cause of action is to execute this in REM. */
179#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1126
180
181/** Reason for leaving GC: Emulate instruction. */
182#define VINF_EM_RAW_EMULATE_INSTR 1127
183/** Reason for leaving GC: Unhandled TSS write.
184 * Recompiler gets control. */
185#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1128
186/** Reason for leaving GC: Unhandled LDT write.
187 * Recompiler gets control. */
188#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1129
189/** Reason for leaving GC: Unhandled IDT write.
190 * Recompiler gets control. */
191#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1130
192/** Reason for leaving GC: Unhandled GDT write.
193 * Recompiler gets control. */
194#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1131
195/** Reason for leaving GC: Unhandled Page Directory write.
196 * Recompiler gets control. */
197#define VINF_EM_RAW_EMULATE_INSTR_PD_FAULT 1132
198/** Reason for leaving GC: jump inside generated patch jump.
199 * Fatal error. */
200#define VERR_EM_RAW_PATCH_CONFLICT (-1133)
201/** Reason for leaving GC: Hlt instruction.
202 * Recompiler gets control. */
203#define VINF_EM_RAW_EMULATE_INSTR_HLT 1134
204/** Reason for leaving GC: Ring-3 operation pending. */
205#define VINF_EM_RAW_TO_R3 1135
206/** Reason for leaving GC: Timer pending. */
207#define VINF_EM_RAW_TIMER_PENDING 1136
208/** Reason for leaving GC: Interrupt pending (guest). */
209#define VINF_EM_RAW_INTERRUPT_PENDING 1137
210/** Reason for leaving GC: Encountered a stale selector. */
211#define VINF_EM_RAW_STALE_SELECTOR 1138
212/** Reason for leaving GC: The IRET resuming guest code trapped. */
213#define VINF_EM_RAW_IRET_TRAP 1139
214/** The interpreter was unable to deal with the instruction at hand. */
215#define VERR_EM_INTERPRETER (-1148)
216/** Internal EM error caused by an unknown warning or informational status code. */
217#define VERR_EM_INTERNAL_ERROR (-1149)
218/** Pending VM request packet. */
219#define VINF_EM_PENDING_REQUEST (-1150)
220/** @} */
221
222
223/** @name Debugging Facility (DBGF) DBGF Status Codes
224 * @{
225 */
226/** The function called requires the caller to be attached as a
227 * debugger to the VM. */
228#define VERR_DBGF_NOT_ATTACHED (-1200)
229/** Someone (including the caller) was already attached as
230 * debugger to the VM. */
231#define VERR_DBGF_ALREADY_ATTACHED (-1201)
232/** Tried to hald a debugger which was already halted.
233 * (This is a warning and not an error.) */
234#define VWRN_DBGF_ALREADY_HALTED 1202
235/** The DBGF has no more free breakpoint slots. */
236#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
237/** The DBGF couldn't find the specified breakpoint. */
238#define VERR_DBGF_BP_NOT_FOUND (-1204)
239/** Attempted to enabled a breakpoint which was already enabled. */
240#define VINF_DBGF_BP_ALREADY_ENABLED 1205
241/** Attempted to disabled a breakpoint which was already disabled. */
242#define VINF_DBGF_BP_ALREADY_DISABLED 1206
243/** The breakpoint already exists. */
244#define VINF_DBGF_BP_ALREADY_EXIST 1207
245/** The byte string was not found. */
246#define VERR_DBGF_MEM_NOT_FOUND (-1208)
247/** The OS was not detected. */
248#define VERR_DBGF_OS_NOT_DETCTED (-1209)
249/** The OS was not detected. */
250#define VINF_DBGF_OS_NOT_DETCTED 1209
251/** @} */
252
253
254/** @name Patch Manager (PATM) Status Codes
255 * @{
256 */
257/** Non fatal Patch Manager analysis phase warning */
258#define VWRN_CONTINUE_ANALYSIS 1400
259/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
260#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
261/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
262#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
263/** Patch installation refused (patch too complex or unsupported instructions ) */
264#define VERR_PATCHING_REFUSED (-1401)
265/** Unable to find patch */
266#define VERR_PATCH_NOT_FOUND (-1402)
267/** Patch disabled */
268#define VERR_PATCH_DISABLED (-1403)
269/** Patch enabled */
270#define VWRN_PATCH_ENABLED 1404
271/** Patch was already disabled */
272#define VERR_PATCH_ALREADY_DISABLED (-1405)
273/** Patch was already enabled */
274#define VERR_PATCH_ALREADY_ENABLED (-1406)
275/** Patch was removed. */
276#define VWRN_PATCH_REMOVED 1408
277
278/** Reason for leaving GC: \#GP with EIP pointing to patch code. */
279#define VINF_PATM_PATCH_TRAP_GP 1408
280/** First leave GC code. */
281#define VINF_PATM_LEAVEGC_FIRST VINF_PATM_PATCH_TRAP_GP
282/** Reason for leaving GC: \#PF with EIP pointing to patch code. */
283#define VINF_PATM_PATCH_TRAP_PF 1409
284/** Reason for leaving GC: int3 with EIP pointing to patch code. */
285#define VINF_PATM_PATCH_INT3 1410
286/** Reason for leaving GC: \#PF for monitored patch page. */
287#define VINF_PATM_CHECK_PATCH_PAGE 1411
288/** Reason for leaving GC: duplicate instruction called at current eip. */
289#define VINF_PATM_DUPLICATE_FUNCTION 1412
290/** Execute one instruction with the recompiler */
291#define VINF_PATCH_EMULATE_INSTR 1413
292/** Reason for leaving GC: attempt to patch MMIO write. */
293#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
294/** Reason for leaving GC: attempt to patch MMIO read. */
295#define VINF_PATM_HC_MMIO_PATCH_READ 1415
296/** Reason for leaving GC: pending irq after iret that sets IF. */
297#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
298/** Last leave GC code. */
299#define VINF_PATM_LEAVEGC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
300
301/** No conflicts to resolve */
302#define VERR_PATCH_NO_CONFLICT (-1425)
303/** Detected unsafe code for patching */
304#define VERR_PATM_UNSAFE_CODE (-1426)
305/** Terminate search branch */
306#define VWRN_PATCH_END_BRANCH 1427
307/** Already patched */
308#define VERR_PATM_ALREADY_PATCHED (-1428)
309/** Spinlock detection failed. */
310#define VINF_PATM_SPINLOCK_FAILED (1429)
311/** Continue execution after patch trap. */
312#define VINF_PATCH_CONTINUE (1430)
313
314/** @} */
315
316
317/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
318 * @{
319 */
320/** Trap not handled */
321#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
322/** Patch installed */
323#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
324/** Page record not found */
325#define VWRN_CSAM_PAGE_NOT_FOUND 1502
326/** Reason for leaving GC: CSAM wants perform a task in ring-3. */
327#define VINF_CSAM_PENDING_ACTION 1503
328/** @} */
329
330
331/** @name Page Monitor/Manager (PGM) Status Codes
332 * @{
333 */
334/** Attempt to create a GC mapping which conflicts with an existing mapping. */
335#define VERR_PGM_MAPPING_CONFLICT (-1600)
336/** The physical handler range has no corresponding RAM range.
337 * If this is MMIO, see todo above the return. If not MMIO, then it's
338 * someone else's fault... */
339#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
340/** Attempt to register an access handler for a virtual range of which a part
341 * was already handled. */
342#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
343/** Attempt to register an access handler for a physical range of which a part
344 * was already handled. */
345#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
346/** Invalid page directory specified to PGM. */
347#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
348/** Invalid GC physical address. */
349#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
350/** Invalid GC physical range. Usually used when a specified range crosses
351 * a RAM region boundrary. */
352#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
353/** Specified access handler was not found. */
354#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
355/** Attempt to register a RAM range of which parts are already
356 * covered by existing RAM ranges. */
357#define VERR_PGM_RAM_CONFLICT (-1608)
358/** Failed to add new mappings because the current mappings are fixed
359 * in guest os memory. */
360#define VERR_PGM_MAPPINGS_FIXED (-1609)
361/** Failed to fix mappings because of a conflict with the intermediate code. */
362#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
363/** Failed to fix mappings because a mapping rejected the address. */
364#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
365/** Failed to fix mappings because the proposed memory area was to small. */
366#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
367/** Reason for leaving GC: The urge to syncing CR3. */
368#define VINF_PGM_SYNC_CR3 1613
369/** Page not marked for dirty bit tracking */
370#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
371/** Page fault caused by dirty bit tracking; corrected */
372#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
373/** Go ahead with the default Read/Write operation.
374 * This is returned by a HC physical or virtual handler when it wants the PGMPhys[Read|Write]
375 * routine do the reading/writing. */
376#define VINF_PGM_HANDLER_DO_DEFAULT 1616
377/** The paging mode of the host is not supported yet. */
378#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
379/** The physical guest page is a reserved/mmio page and does not have any HC address. */
380#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
381/** No page directory available for the hypervisor. */
382#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
383/** The shadow page pool was flushed.
384 * This means that a global CR3 sync was flagged. Anyone receiving this kind of status
385 * will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */
386#define VERR_PGM_POOL_FLUSHED (-1620)
387/** The shadow page pool was cleared.
388 * This is a error code internal to the shadow page pool, it will be
389 * converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */
390#define VERR_PGM_POOL_CLEARED (-1621)
391/** The returned shadow page is cached. */
392#define VINF_PGM_CACHED_PAGE 1622
393/** Returned by handler registration, modification and deregistration
394 * when the shadow PTs could be updated because the guest page
395 * aliased or/and mapped by multiple PTs. */
396#define VINF_PGM_GCPHYS_ALIASED 1623
397/** Reason for leaving GC: Paging mode changed.
398 * PGMChangeMode() uses this to force a switch to HC so it can safely
399 * deal with a mode switch.
400 */
401#define VINF_PGM_CHANGE_MODE 1624
402/** SyncPage modified the PDE.
403 * This is an internal status code used to communicate back to the \#PF handler
404 * that the PDE was (probably) marked not-present and it should restart the instruction. */
405#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
406/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
407#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
408/** Conflict between the core memory and the intermediate paging context, try again.
409 * There are some very special conditions applying to the intermediate paging context
410 * (used during the world switches), and some times we continuously run into these
411 * when asking the host kernel for memory during VM init. Let us know if you run into
412 * this and we'll adjust the code so it tries harder to avoid it.
413 */
414#define VERR_PGM_INTERMEDIATE_PAGING_CONFLICT (-1627)
415/** The shadow paging mode is not supported yet. */
416#define VERR_PGM_UNSUPPORTED_SHADOW_PAGING_MODE (-1628)
417/** The dynamic mapping cache for physical memory failed. */
418#define VERR_PGM_DYNMAP_FAILED (-1629)
419/** The auto usage cache for the dynamic mapping set is full. */
420#define VERR_PGM_DYNMAP_FULL_SET (-1630)
421/** The initialization of the dynamic mapping cache failed. */
422#define VERR_PGM_DYNMAP_SETUP_ERROR (-1631)
423/** The expanding of the dynamic mapping cache failed. */
424#define VERR_PGM_DYNMAP_EXPAND_ERROR (-1632)
425/** The page is unassigned (akin to VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS). */
426#define VERR_PGM_PHYS_TLB_UNASSIGNED (-1633)
427/** Catch any access and route it thru PGM. */
428#define VERR_PGM_PHYS_TLB_CATCH_ALL (-1634)
429/** Catch write access and route it thru PGM. */
430#define VINF_PGM_PHYS_TLB_CATCH_WRITE 1635
431
432/** @} */
433
434
435/** @name Memory Monitor (MM) Status Codes
436 * @{
437 */
438/** Attempt to register a RAM range of which parts are already
439 * covered by existing RAM ranges. */
440#define VERR_MM_RAM_CONFLICT (-1700)
441/** Hypervisor memory allocation failed. */
442#define VERR_MM_HYPER_NO_MEMORY (-1701)
443
444/** @} */
445
446
447/** @name Save State Manager (SSM) Status Codes
448 * @{
449 */
450/** The specified data unit already exist. */
451#define VERR_SSM_UNIT_EXISTS (-1800)
452/** The specified data unit wasn't found. */
453#define VERR_SSM_UNIT_NOT_FOUND (-1801)
454/** The specified data unit wasn't owned by caller. */
455#define VERR_SSM_UNIT_NOT_OWNER (-1802)
456/** General saved state file integrity error. */
457#define VERR_SSM_INTEGRITY (-1810)
458/** The saved state file magic was not recognized. */
459#define VERR_SSM_INTEGRITY_MAGIC (-1811)
460/** The saved state file version is not supported. */
461#define VERR_SSM_INTEGRITY_VERSION (-1812)
462/** The saved state file size didn't match the one in the header. */
463#define VERR_SSM_INTEGRITY_SIZE (-1813)
464/** The CRC of the saved state file did match. */
465#define VERR_SSM_INTEGRITY_CRC (-1814)
466/** The current virtual machine id didn't match the virtual machine id. */
467#define VERR_SMM_INTEGRITY_MACHINE (-1815)
468/** Invalid unit magic (internal data tag). */
469#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1816)
470/** The file contained a data unit which no-one wants. */
471#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1817)
472/** Incorrect type sizes in the header. */
473#define VERR_SSM_INTEGRITY_SIZES (-1818)
474/** Incorrect version numbers in the header. */
475#define VERR_SSM_INTEGRITY_VBOX_VERSION (-1819)
476/** A data unit in the saved state file was defined but didn't any
477 * routine for processing it. */
478#define VERR_SSM_NO_LOAD_EXEC (-1820)
479/** A restore routine attempted to load more data then the unit contained. */
480#define VERR_SSM_LOADED_TOO_MUCH (-1821)
481/** Not in the correct state for the attempted operation. */
482#define VERR_SSM_INVALID_STATE (-1822)
483
484/** Unsupported data unit version.
485 * A SSM user returns this if it doesn't know the u32Version. */
486#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1823)
487/** The format of a data unit has changed.
488 * A SSM user returns this if it's not able to read the format for
489 * other reasons than u32Version. */
490#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1824)
491/** The CPUID instruction returns different information when loading than when saved.
492 * Normally caused by hardware changes on the host, but could also be caused by
493 * changes in the BIOS setup. */
494#define VERR_SSM_LOAD_CPUID_MISMATCH (-1825)
495/** The RAM size differes between the saved state and the VM config. */
496#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1826)
497/** The state doesn't match the VM configuration in one or another way.
498 * (There are certain PCI reconfiguration which the OS could potentially
499 * do which can cause this problem. Check this out when it happens.) */
500#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1827)
501/** The virtual clock freqency differs too much.
502 * The clock source for the virtual time isn't reliable or the code have changed. */
503#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1828)
504/** A timeout occured while waiting for async IDE operations to finish. */
505#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1829)
506/** One of the structure magics was wrong. */
507#define VERR_SSM_STRUCTURE_MAGIC (-1830)
508/** The data in the saved state doesn't confirm to expectations. */
509#define VERR_SSM_UNEXPECTED_DATA (-1831)
510/** Trying to read a 64-bit guest physical address into a 32-bit variable. */
511#define VERR_SSM_GCPHYS_OVERFLOW (-1832)
512/** Trying to read a 64-bit guest virtual address into a 32-bit variable. */
513#define VERR_SSM_GCPTR_OVERFLOW (-1833)
514/** @} */
515
516
517/** @name Virtual Machine (VM) Status Codes
518 * @{
519 */
520/** The specified at reset handler wasn't found. */
521#define VERR_VM_ATRESET_NOT_FOUND (-1900)
522/** Invalid VM request type.
523 * For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
524 * all the other occurences it means indicates corruption, broken logic, or stupid
525 * interface user. */
526#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
527/** Invalid VM request state.
528 * The state of the request packet was not the expected and accepted one(s). Either
529 * the interface user screwed up, or we've got corruption/broken logic. */
530#define VERR_VM_REQUEST_STATE (-1902)
531/** Invalid VM request packet.
532 * One or more of the the VM controlled packet members didn't contain the correct
533 * values. Some thing's broken. */
534#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
535/** The status field has not been updated yet as the request is still
536 * pending completion. Someone queried the iStatus field before the request
537 * has been fully processed. */
538#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
539/** The request has been freed, don't read the status now.
540 * Someone is reading the iStatus field of a freed request packet. */
541#define VERR_VM_REQUEST_STATUS_FREED (-1905)
542/** A VM api requiring EMT was called from another thread.
543 * Use the VMR3ReqCall() apis to call it! */
544#define VERR_VM_THREAD_NOT_EMT (-1906)
545/** The VM state was invalid for the requested operation.
546 * Go check the 'VM Statechart Diagram.gif'. */
547#define VERR_VM_INVALID_VM_STATE (-1907)
548/** The support driver is not installed.
549 * On linux, open returned ENOENT. */
550#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
551/** The support driver is not accessible.
552 * On linux, open returned EPERM. */
553#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
554/** Was not able to load the support driver.
555 * On linux, open returned ENODEV. */
556#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
557/** Was not able to open the support driver.
558 * Generic open error used when none of the other ones fit. */
559#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
560/** The installed support driver doesn't match the version of the user. */
561#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
562/** Saving the VM state is temporarily not allowed. Try again later. */
563#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
564/** @} */
565
566
567/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
568 * @{
569 */
570/** Successful completion of operation (mapped to generic iprt status code). */
571#define VINF_VRDP_SUCCESS VINF_SUCCESS
572/** VRDP transport operation timed out (mapped to generic iprt status code). */
573#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
574
575/** Unsupported ISO protocol feature */
576#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
577/** Security (en/decryption) engine error */
578#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
579/** VRDP protocol violation */
580#define VERR_VRDP_PROTOCOL_ERROR (-2002)
581/** Unsupported VRDP protocol feature */
582#define VERR_VRDP_NOT_SUPPORTED (-2003)
583/** VRDP protocol violation, client sends less data than expected */
584#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
585/** Internal error, VRDP packet is in wrong operation mode */
586#define VERR_VRDP_INVALID_MODE (-2005)
587/** Memory allocation failed */
588#define VERR_VRDP_NO_MEMORY (-2006)
589/** Client has been rejected */
590#define VERR_VRDP_ACCESS_DENIED (-2007)
591/** VRPD receives a packet that is not supported */
592#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
593/** VRDP script allowed the packet to be processed further */
594#define VINF_VRDP_PROCESS_PDU 2009
595/** VRDP script has completed its task */
596#define VINF_VRDP_OPERATION_COMPLETED 2010
597/** VRDP thread has started OK and will run */
598#define VINF_VRDP_THREAD_STARTED 2011
599/** Framebuffer is resized, terminate send bitmap procedure */
600#define VINF_VRDP_RESIZE_REQUESTED 2012
601/** Output can be enabled for the client. */
602#define VINF_VRDP_OUTPUT_ENABLE 2013
603/** @} */
604
605
606/** @name Configuration Manager (CFGM) Status Codes
607 * @{
608 */
609/** The integer value was too big for the requested representation. */
610#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
611/** Child node was not found. */
612#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
613/** Path to child node was invalid (i.e. empty). */
614#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
615/** Value not found. */
616#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
617/** No parent node specified. */
618#define VERR_CFGM_NO_PARENT (-2104)
619/** No node was specified. */
620#define VERR_CFGM_NO_NODE (-2105)
621/** The value is not an integer. */
622#define VERR_CFGM_NOT_INTEGER (-2106)
623/** The value is not a zero terminated character string. */
624#define VERR_CFGM_NOT_STRING (-2107)
625/** The value is not a byte string. */
626#define VERR_CFGM_NOT_BYTES (-2108)
627/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
628#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
629/** The path of a new node contained slashs or was empty. */
630#define VERR_CFGM_INVALID_NODE_PATH (-2160)
631/** A new node couldn't be inserted because one with the same name exists. */
632#define VERR_CFGM_NODE_EXISTS (-2161)
633/** A new leaf couldn't be inserted because one with the same name exists. */
634#define VERR_CFGM_LEAF_EXISTS (-2162)
635/** @} */
636
637
638/** @name Time Manager (TM) Status Codes
639 * @{
640 */
641/** The loaded timer state was incorrect. */
642#define VERR_TM_LOAD_STATE (-2200)
643/** The timer was not in the correct state for the request operation. */
644#define VERR_TM_INVALID_STATE (-2201)
645/** The timer was in a unknown state. Corruption or stupid coding error. */
646#define VERR_TM_UNKNOWN_STATE (-2202)
647/** The timer was stuck in an unstable state until we grew impatient and returned. */
648#define VERR_TM_UNSTABLE_STATE (-2203)
649/** @} */
650
651
652/** @name Recompiled Execution Manager (REM) Status Codes
653 * @{
654 */
655/** Fatal error in virtual hardware. */
656#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
657/** Fatal error in the recompiler cpu. */
658#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
659/** Recompiler execution was interrupted by forced action. */
660#define VINF_REM_INTERRUPED_FF 2302
661/** Reason for leaving GC: Must flush pending invlpg operations to REM.
662 * Tell REM to flush page invalidations. Will temporary go to REM context
663 * from REM and perform the flushes. */
664#define VERR_REM_FLUSHED_PAGES_OVERFLOW (-2303)
665/** Too many similar traps. This is a very useful debug only
666 * check (we don't do double/tripple faults in REM). */
667#define VERR_REM_TOO_MANY_TRAPS (-2304)
668/** The REM is out of breakpoint slots. */
669#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
670/** The REM could not find any breakpoint on the specified address. */
671#define VERR_REM_BP_NOT_FOUND (-2306)
672/** @} */
673
674
675/** @name Trap Manager / Monitor (TRPM) Status Codes
676 * @{
677 */
678/** No active trap. Cannot query or reset a non-existing trap. */
679#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
680/** Active trap. Cannot assert a new trap when when one is already active. */
681#define VERR_TRPM_ACTIVE_TRAP (-2401)
682/** Reason for leaving GC: Guest tried to write to our IDT - fatal.
683 * The VM will be terminated assuming the worst, i.e. that the
684 * guest has read the idtr register. */
685#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
686/** Reason for leaving GC: Fatal trap in hypervisor. */
687#define VERR_TRPM_DONT_PANIC (-2403)
688/** Reason for leaving GC: Double Fault. */
689#define VERR_TRPM_PANIC (-2404)
690/** The exception was dispatched for raw-mode execution. */
691#define VINF_TRPM_XCPT_DISPATCHED 2405
692/** @} */
693
694
695/** @name Selector Manager / Monitor (SELM) Status Code
696 * @{
697 */
698/** Reason for leaving GC: Guest tried to write to our GDT - fatal.
699 * The VM will be terminated assuming the worst, i.e. that the
700 * guest has read the gdtr register. */
701#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
702/** Reason for leaving GC: Guest tried to write to our LDT - fatal.
703 * The VM will be terminated assuming the worst, i.e. that the
704 * guest has read the ldtr register. */
705#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
706/** Reason for leaving GC: Guest tried to write to our TSS - fatal.
707 * The VM will be terminated assuming the worst, i.e. that the
708 * guest has read the ltr register. */
709#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
710/** Reason for leaving GC: Sync the GDT table to solve a conflict. */
711#define VINF_SELM_SYNC_GDT 2503
712/** No valid TSS present. */
713#define VERR_SELM_NO_TSS (-2504)
714/** @} */
715
716
717/** @name I/O Manager / Monitor (IOM) Status Code
718 * @{
719 */
720/** The specified I/O port range was invalid.
721 * It was either empty or it was out of bounds. */
722#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
723/** The specified GC I/O port range didn't have a corresponding HC range.
724 * IOMIOPortRegisterHC() must be called before IOMIOPortRegisterGC(). */
725#define VERR_IOM_NO_HC_IOPORT_RANGE (-2601)
726/** The specified I/O port range intruded on an existing range. There is
727 * a I/O port conflict between two device, or a device tried to register
728 * the same range twice. */
729#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
730/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
731#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
732/** The specified I/O port range was owned by some other device(s). Both registration
733 * and deregistration, but in the first case only GC ranges. */
734#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
735
736/** The specified MMIO range was invalid.
737 * It was either empty or it was out of bounds. */
738#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
739/** The specified GC MMIO range didn't have a corresponding HC range.
740 * IOMMMIORegisterHC() must be called before IOMMMIORegisterGC(). */
741#define VERR_IOM_NO_HC_MMIO_RANGE (-2606)
742/** The specified MMIO range was owned by some other device(s). Both registration
743 * and deregistration, but in the first case only GC ranges. */
744#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
745/** The specified MMIO range intruded on an existing range. There is
746 * a MMIO conflict between two device, or a device tried to register
747 * the same range twice. */
748#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
749/** The MMIO range specified for removal was not found. */
750#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
751/** The MMIO range specified for removal was invalid. The range didn't match
752 * quite match a set of existing ranges. It's not possible to remove parts of
753 * a MMIO range, only one or more full ranges. */
754#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
755/** An invalid I/O port size was specified for a read or write operation. */
756#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
757/** The MMIO handler was called for a bogus address! Internal error! */
758#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
759/** The MMIO handler experienced a problem with the disassembler. */
760#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
761/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
762#define VERR_IOM_IOPORT_UNUSED (-2614)
763/** Unused MMIO register read, fill with 00. */
764#define VINF_IOM_MMIO_UNUSED_00 2615
765/** Unused MMIO register read, fill with FF. */
766#define VINF_IOM_MMIO_UNUSED_FF 2616
767
768/** Reason for leaving GC: I/O port read. */
769#define VINF_IOM_HC_IOPORT_READ 2620
770/** Reason for leaving GC: I/O port write. */
771#define VINF_IOM_HC_IOPORT_WRITE 2621
772/** Reason for leaving GC: MMIO write. */
773#define VINF_IOM_HC_MMIO_READ 2623
774/** Reason for leaving GC: MMIO read. */
775#define VINF_IOM_HC_MMIO_WRITE 2624
776/** Reason for leaving GC: MMIO read/write. */
777#define VINF_IOM_HC_MMIO_READ_WRITE 2625
778/** @} */
779
780
781/** @name Virtual Machine Monitor (VMM) Status Codes
782 * @{
783 */
784/** Reason for leaving GC: Calling host function. */
785#define VINF_VMM_CALL_HOST 2700
786/** Reason for leaving R0: Hit a ring-0 assertion on EMT. */
787#define VERR_VMM_RING0_ASSERTION (-2701)
788/** @} */
789
790
791/** @name Pluggable Device and Driver Manager (PDM) Status Codes
792 * @{
793 */
794/** An invalid LUN specification was given. */
795#define VERR_PDM_NO_SUCH_LUN (-2800)
796/** A device encountered an unknown configuration value.
797 * This means that the device is potentially misconfigured and the device
798 * construction or unit attachment failed because of this. */
799#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
800/** The above driver doesn't export a interface required by a driver being
801 * attached to it. Typical misconfiguration problem. */
802#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
803/** The below driver doesn't export a interface required by the drive
804 * having attached it. Typical misconfiguration problem. */
805#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
806/** A device didn't find a required interface with an attached driver.
807 * Typical misconfiguration problem. */
808#define VERR_PDM_MISSING_INTERFACE (-2804)
809/** A driver encountered an unknown configuration value.
810 * This means that the driver is potentially misconfigured and the driver
811 * construction failed because of this. */
812#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
813/** The PCI bus assigned to a device didn't have room for it.
814 * Either too many devices are configured on the same PCI bus, or there are
815 * some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
816#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
817/** A queue is out of free items, the queueing operation failed. */
818#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
819/** Not possible to attach further drivers to the driver.
820 * A driver which doesn't support attachments (below of course) will
821 * return this status code if it found that further drivers were configured
822 * to be attached to it. */
823#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
824/** Not possible to attach drivers to the device.
825 * A device which doesn't support attachments (below of course) will
826 * return this status code if it found that drivers were configured
827 * to be attached to it. */
828#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
829/** No attached driver.
830 * The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
831 * this error when no driver was configured to be attached. */
832#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
833/** The media geometry hasn't been set yet, so it cannot be obtained.
834 * The caller should then calculate the geometry from the media size. */
835#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
836/** The media translation hasn't been set yet, so it cannot be obtained.
837 * The caller should then guess the translation. */
838#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
839/** The media is not mounted, operation requires a mounted media. */
840#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
841/** Mount failed because a media was already mounted. Unmount the media
842 * and retry the mount. */
843#define VERR_PDM_MEDIA_MOUNTED (-2814)
844/** The media is locked and cannot be unmounted. */
845#define VERR_PDM_MEDIA_LOCKED (-2815)
846/** No 'Type' attribute in the DrvBlock configuration.
847 * Misconfiguration. */
848#define VERR_PDM_BLOCK_NO_TYPE (-2816)
849/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
850 * Misconfiguration. */
851#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
852/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
853 * Misconfiguration. */
854#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
855/** The block driver type wasn't supported.
856 * Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
857#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
858/** A attach or prepare mount call failed because the driver already
859 * had a driver attached. */
860#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
861/** An attempt on deattaching a driver without anyone actually being attached, or
862 * performing any other operation on an attached driver. */
863#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
864/** The attached driver configuration is missing the 'Driver' attribute. */
865#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
866/** The configured driver wasn't found.
867 * Either the necessary driver modules wasn't loaded, the name was
868 * misspelled, or it was a misconfiguration. */
869#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
870/** The Ring-3 module was already loaded. */
871#define VINF_PDM_ALREADY_LOADED (2824)
872/** The name of the module clashed with an existing module. */
873#define VERR_PDM_MODULE_NAME_CLASH (-2825)
874/** Couldn't find any export for registration of drivers/devices. */
875#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
876/** A module name is too long. */
877#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
878/** Driver name clash. Another driver with the same name as the
879 * one begin registred exists. */
880#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
881/** The version of the driver registration structure is unknown
882 * to this VBox version. Either mixing incompatible versions or
883 * the structure isn't correctly initialized. */
884#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
885/** Invalid entry in the driver registration structure. */
886#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
887/** Invalid host bit mask. */
888#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
889/** Not possible to detach a driver because the above driver/device
890 * doesn't support it. The above entity doesn't implement the pfnDetach call. */
891#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
892/** No PCI Bus is available to register the device with. This is usually a
893 * misconfiguration or in rare cases a buggy pci device. */
894#define VERR_PDM_NO_PCI_BUS (-2833)
895/** The device is not a registered PCI device and thus cannot
896 * perform any PCI operations. The device forgot to register it self. */
897#define VERR_PDM_NOT_PCI_DEVICE (-2834)
898
899/** The version of the device registration structure is unknown
900 * to this VBox version. Either mixing incompatible versions or
901 * the structure isn't correctly initialized. */
902#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
903/** Invalid entry in the device registration structure. */
904#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
905/** Invalid host bit mask. */
906#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
907/** The guest bit mask didn't match the guest being loaded. */
908#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
909/** Device name clash. Another device with the same name as the
910 * one begin registred exists. */
911#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
912/** The device wasn't found. There was no registered device
913 * by that name. */
914#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
915/** The device instance was not found. */
916#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
917/** The device instance have no base interface. */
918#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
919/** The device instance have no such logical unit. */
920#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
921/** The driver instance could not be found. */
922#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
923/** Logical Unit was not found. */
924#define VERR_PDM_LUN_NOT_FOUND (-2845)
925/** The Logical Unit was found, but it had no driver attached to it. */
926#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
927/** The Logical Unit was found, but it had no driver attached to it. */
928#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
929/** No PIC device instance is registered with the current VM and thus
930 * the PIC operation cannot be performed. */
931#define VERR_PDM_NO_PIC_INSTANCE (-2847)
932/** No APIC device instance is registered with the current VM and thus
933 * the APIC operation cannot be performed. */
934#define VERR_PDM_NO_APIC_INSTANCE (-2848)
935/** No DMAC device instance is registered with the current VM and thus
936 * the DMA operation cannot be performed. */
937#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
938/** No RTC device instance is registered with the current VM and thus
939 * the RTC or CMOS operation cannot be performed. */
940#define VERR_PDM_NO_RTC_INSTANCE (-2850)
941/** Unable to open the host interface due to a sharing violation . */
942#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
943/** Unable to open the host interface. */
944#define VERR_PDM_HIF_OPEN_FAILED (-2852)
945/** The device doesn't support runtime driver attaching.
946 * The PDMDEVREG::pfnAttach callback function is NULL. */
947#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
948/** The device doesn't support runtime driver detaching.
949 * The PDMDEVREG::pfnDetach callback function is NULL. */
950#define VERR_PDM_DEVICE_NO_RT_DETACH (-2854)
951/** Invalid host interface version. */
952#define VERR_PDM_HIF_INVALID_VERSION (-2855)
953
954/** The version of the USB device registration structure is unknown
955 * to this VBox version. Either mixing incompatible versions or
956 * the structure isn't correctly initialized. */
957#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
958/** Invalid entry in the device registration structure. */
959#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
960/** Driver name clash. Another driver with the same name as the
961 * one begin registred exists. */
962#define VERR_PDM_USB_NAME_CLASH (-2858)
963/** The USB hub is already registered. */
964#define VERR_PDM_USB_HUB_EXISTS (-2859)
965/** Couldn't find any USB hubs to attach the device to. */
966#define VERR_PDM_NO_USB_HUBS (-2860)
967/** Couldn't find any free USB ports to attach the device to. */
968#define VERR_PDM_NO_USB_PORTS (-2861)
969/** Couldn't find the USB Proxy device. Using OSE? */
970#define VERR_PDM_NO_USBPROXY (-2862)
971/** The async completion template is still used. */
972#define VERR_PDM_ASYNC_TEMPLATE_BUSY (-2863)
973/** The async completion task is already suspended. */
974#define VERR_PDM_ASYNC_COMPLETION_ALREADY_SUSPENDED (-2864)
975/** The async completion task is not suspended. */
976#define VERR_PDM_ASYNC_COMPLETION_NOT_SUSPENDED (-2865)
977/** The driver properties were invalid, and as a consequence construction
978 * failed. Caused my unusable media or similar problems. */
979#define VERR_PDM_DRIVER_INVALID_PROPERTIES (-2866)
980/** @} */
981
982
983/** @name Host-Guest Communication Manager (HGCM) Status Codes
984 * @{
985 */
986/** Requested service does not exist. */
987#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
988/** Service rejected client connection */
989#define VINF_HGCM_CLIENT_REJECTED 2901
990/** Command address is invalid. */
991#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
992/** Service will execute the command in background. */
993#define VINF_HGCM_ASYNC_EXECUTE 2903
994/** HGCM could not perform requested operation because of an internal error. */
995#define VERR_HGCM_INTERNAL (-2904)
996/** Invalid HGCM client id. */
997#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
998/** The HGCM is saving state. */
999#define VINF_HGCM_SAVE_STATE (2906)
1000/** Requested service already exists. */
1001#define VERR_HGCM_SERVICE_EXISTS (-2907)
1002
1003/** @} */
1004
1005
1006/** @name Network Address Translation Driver (DrvNAT) Status Codes
1007 * @{
1008 */
1009/** Failed to find the DNS configured for this machine. */
1010#define VINF_NAT_DNS 3000
1011/** Failed to convert the specified Guest IP to a binary IP address.
1012 * Malformed input. */
1013#define VERR_NAT_REDIR_GUEST_IP (-3001)
1014/** Failed while setting up a redirector rule.
1015 * There probably is a conflict between the rule and some existing
1016 * service on the computer. */
1017#define VERR_NAT_REDIR_SETUP (-3002)
1018/** @} */
1019
1020
1021/** @name HostIF Driver (DrvTUN) Status Codes
1022 * @{
1023 */
1024/** The Host Interface Networking init program failed. */
1025#define VERR_HOSTIF_INIT_FAILED (-3100)
1026/** The Host Interface Networking device name is too long. */
1027#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
1028/** The Host Interface Networking name config IOCTL call failed. */
1029#define VERR_HOSTIF_IOCTL (-3102)
1030/** Failed to make the Host Interface Networking handle non-blocking. */
1031#define VERR_HOSTIF_BLOCKING (-3103)
1032/** If a Host Interface Networking filehandle was specified it's not allowed to
1033 * have any init or term programs. */
1034#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
1035/** The Host Interface Networking terminate program failed. */
1036#define VERR_HOSTIF_TERM_FAILED (-3105)
1037/** @} */
1038
1039
1040/** @name VBox HDD Container (VD) Status Codes
1041 * @{
1042 */
1043/** Invalid image type. */
1044#define VERR_VD_INVALID_TYPE (-3200)
1045/** Operation can't be done in current HDD container state. */
1046#define VERR_VD_INVALID_STATE (-3201)
1047/** Configuration value not found. */
1048#define VERR_VD_VALUE_NOT_FOUND (-3202)
1049/** Virtual HDD is not opened. */
1050#define VERR_VD_NOT_OPENED (-3203)
1051/** Requested image is not opened. */
1052#define VERR_VD_IMAGE_NOT_FOUND (-3204)
1053/** Image is read-only. */
1054#define VERR_VD_IMAGE_READ_ONLY (-3205)
1055/** Geometry hasn't been set. */
1056#define VERR_VD_GEOMETRY_NOT_SET (-3206)
1057/** No data for this block in image. */
1058#define VERR_VD_BLOCK_FREE (-3207)
1059/** Differencing and parent images can't be used together due to UUID. */
1060#define VERR_VD_UUID_MISMATCH (-3208)
1061/** Asynchronous I/O request finished. */
1062#define VINF_VD_ASYNC_IO_FINISHED 3209
1063/** Asynchronous I/O is not finished yet. */
1064#define VERR_VD_ASYNC_IO_IN_PROGRESS (-3210)
1065/** Generic: Invalid image file header. Use this for plugins. */
1066#define VERR_VD_GEN_INVALID_HEADER (-3220)
1067/** VDI: Invalid image file header. */
1068#define VERR_VD_VDI_INVALID_HEADER (-3230)
1069/** VDI: Invalid image file header: invalid signature. */
1070#define VERR_VD_VDI_INVALID_SIGNATURE (-3231)
1071/** VDI: Invalid image file header: invalid version. */
1072#define VERR_VD_VDI_UNSUPPORTED_VERSION (-3232)
1073/** Comment string is too long. */
1074#define VERR_VD_VDI_COMMENT_TOO_LONG (-3233)
1075/** VMDK: Invalid image file header. */
1076#define VERR_VD_VMDK_INVALID_HEADER (-3240)
1077/** VMDK: Invalid image file header: invalid version. */
1078#define VERR_VD_VMDK_UNSUPPORTED_VERSION (-3241)
1079/** VMDK: Image property not found. */
1080#define VERR_VD_VMDK_VALUE_NOT_FOUND (-3242)
1081/** VMDK: Operation can't be done in current image state. */
1082#define VERR_VD_VMDK_INVALID_STATE (-3243)
1083/** iSCSI: Invalid header, i.e. dummy for validity check. */
1084#define VERR_VD_ISCSI_INVALID_HEADER (-3250)
1085/** iSCSI: Configuration value is unknown. This indicates misconfiguration. */
1086#define VERR_VD_ISCSI_UNKNOWN_CFG_VALUES (-3251)
1087/** iSCSI: Interface is unknown. This indicates misconfiguration. */
1088#define VERR_VD_ISCSI_UNKNOWN_INTERFACE (-3252)
1089/** iSCSI: Operation can't be done in current image state. */
1090#define VERR_VD_ISCSI_INVALID_STATE (-3253)
1091/** iSCSI: Invalid device type (not a disk). */
1092#define VERR_VD_ISCSI_INVALID_TYPE (-3254)
1093/** VHD: Invalid image file header. */
1094#define VERR_VD_VHD_INVALID_HEADER (-3260)
1095/** Raw: Invalid image file header. */
1096#define VERR_VD_RAW_INVALID_HEADER (-3270)
1097/** Raw: Invalid image file type. */
1098#define VERR_VD_RAW_INVALID_TYPE (-3271)
1099/** @} */
1100
1101
1102/** @name VBox Guest Library (VBGL) Status Codes
1103 * @{
1104 */
1105/** Library was not initialized. */
1106#define VERR_VBGL_NOT_INITIALIZED (-3300)
1107/** Virtual address was not allocated by the library. */
1108#define VERR_VBGL_INVALID_ADDR (-3301)
1109/** IOCtl to VBoxGuest driver failed. */
1110#define VERR_VBGL_IOCTL_FAILED (-3302)
1111/** @} */
1112
1113
1114/** @name VBox USB (VUSB) Status Codes
1115 * @{
1116 */
1117/** No available ports on the hub.
1118 * This error is returned when a device is attempted created and/or attached
1119 * to a hub which is out of ports. */
1120#define VERR_VUSB_NO_PORTS (-3400)
1121/** The requested operation cannot be performed on a detached USB device. */
1122#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1123/** Failed to allocate memory for a URB. */
1124#define VERR_VUSB_NO_URB_MEMORY (-3402)
1125/** General failure during URB queuing.
1126 * This will go away when the queueing gets proper status code handling. */
1127#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1128/** Device creation failed because the USB device name was not found. */
1129#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1130/** Not permitted to open the USB device.
1131 * The user doesn't have access to the device in the usbfs, check the mount options. */
1132#define VERR_VUSB_USBFS_PERMISSION (-3405)
1133/** The requested operation cannot be performed because the device
1134 * is currently being reset. */
1135#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1136/** @} */
1137
1138
1139/** @name VBox VGA Status Codes
1140 * @{
1141 */
1142/** One of the custom modes was incorrect.
1143 * The format or bit count of the custom mode value is invalid. */
1144#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1145/** The display connector is resizing. */
1146#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1147/** @} */
1148
1149
1150/** @name Internal Networking Status Codes
1151 * @{
1152 */
1153/** The networking interface to filter was not found. */
1154#define VERR_INTNET_FLT_IF_NOT_FOUND (-3600)
1155/** The networking interface to filter was busy (used by someone). */
1156#define VERR_INTNET_FLT_IF_BUSY (-3601)
1157/** Failed to create or connect to a networking interface filter. */
1158#define VERR_INTNET_FLT_IF_FAILED (-3602)
1159/** The network already exists with a different trunk configuration. */
1160#define VERR_INTNET_INCOMPATIBLE_TRUNK (-3603)
1161/** The network already exists with a different security profile (restricted / public). */
1162#define VERR_INTNET_INCOMPATIBLE_FLAGS (-3604)
1163/** @} */
1164
1165
1166/** @name Support Driver Status Codes
1167 * @{
1168 */
1169/** The component factory was not found. */
1170#define VERR_SUPDRV_COMPONENT_NOT_FOUND (-3700)
1171/** The component factories do not support the requested interface. */
1172#define VERR_SUPDRV_INTERFACE_NOT_SUPPORTED (-3701)
1173/** The service module was not found. */
1174#define VERR_SUPDRV_SERVICE_NOT_FOUND (-3702)
1175/** @} */
1176
1177
1178/** @name VBox GMM Status Codes
1179 * @{
1180 */
1181/** The GMM is out of pages and needs to be give another chunk of user memory that
1182 * it can lock down and borrow pages from. */
1183#define VERR_GMM_SEED_ME (-3800)
1184/** Unable to allocate more pages from the host system. */
1185#define VERR_GMM_OUT_OF_MEMORY (-3801)
1186/** Hit the global allocation limit.
1187 * If you know there is still sufficient memory available, try raise the limit. */
1188#define VERR_GMM_HIT_GLOBAL_LIMIT (-3802)
1189/** Hit the a VM account limit. */
1190#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-3803)
1191/** Attempt to free more memory than what was previously allocated. */
1192#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-3804)
1193/** Attempted to report too many pages as deflated. */
1194#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-3805)
1195/** The page to be freed or updated was not found. */
1196#define VERR_GMM_PAGE_NOT_FOUND (-3806)
1197/** The specified shared page was not actually private. */
1198#define VERR_GMM_PAGE_NOT_PRIVATE (-3807)
1199/** The specified shared page was not actually shared. */
1200#define VERR_GMM_PAGE_NOT_SHARED (-3808)
1201/** The page to be freed was already freed. */
1202#define VERR_GMM_PAGE_ALREADY_FREE (-3809)
1203/** The page to be updated or freed was noted owned by the caller. */
1204#define VERR_GMM_NOT_PAGE_OWNER (-3810)
1205/** The specified chunk was not found. */
1206#define VERR_GMM_CHUNK_NOT_FOUND (-3811)
1207/** The chunk has already been mapped into the process. */
1208#define VERR_GMM_CHUNK_ALREADY_MAPPED (-3812)
1209/** The chunk to be unmapped isn't actually mapped into the process. */
1210#define VERR_GMM_CHUNK_NOT_MAPPED (-3813)
1211/** The reservation or reservation update was declined - too many VMs, too
1212 * little memory, and/or too low GMM configuration. */
1213#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-3814)
1214/** @} */
1215
1216
1217/** @name VBox GVM Status Codes
1218 * @{
1219 */
1220/** The GVM is out of VM handle space. */
1221#define VERR_GVM_TOO_MANY_VMS (-3900)
1222/** The EMT thread was not blocked at the time of the call. */
1223#define VINF_GVM_NOT_BLOCKED 3901
1224/** RTThreadYield was called during a GVMMR0ShcedPoll call. */
1225#define VINF_GVM_YIELDED 3902
1226/** @} */
1227
1228
1229/** @name VBox VMX Status Codes
1230 * @{
1231 */
1232/** Invalid VMCS index or write to read-only element. */
1233#define VERR_VMX_INVALID_VMCS_FIELD (-4000)
1234/** Invalid VMCS pointer. */
1235#define VERR_VMX_INVALID_VMCS_PTR (-4001)
1236/** Invalid VMXON pointer. */
1237#define VERR_VMX_INVALID_VMXON_PTR (-4002)
1238/** Generic VMX failure. */
1239#define VERR_VMX_GENERIC (-4003)
1240/** Invalid CPU mode for VMX execution. */
1241#define VERR_VMX_UNSUPPORTED_MODE (-4004)
1242/** Unable to start VM execution. */
1243#define VERR_VMX_UNABLE_TO_START_VM (-4005)
1244/** Unable to resume VM execution. */
1245#define VERR_VMX_UNABLE_TO_RESUME_VM (-4006)
1246/** Unable to switch due to invalid host state. */
1247#define VERR_VMX_INVALID_HOST_STATE (-4007)
1248/** IA32_FEATURE_CONTROL MSR not setup correcty (turn on VMX in the host system BIOS) */
1249#define VERR_VMX_ILLEGAL_FEATURE_CONTROL_MSR (-4008)
1250/** VMX CPU extension not available */
1251#define VERR_VMX_NO_VMX (-4009)
1252/** VMXON failed; possibly because it was already run before */
1253#define VERR_VMX_VMXON_FAILED (-4010)
1254/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
1255#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
1256/** Somebody cleared X86_CR4_VMXE in the CR4 register. */
1257#define VERR_VMX_X86_CR4_VMXE_CLEARED (-4012)
1258/** VT-x features locked or unavailable in MSR. */
1259#define VERR_VMX_MSR_LOCKED_OR_DISABLED (-4013)
1260/** Unable to switch due to invalid guest state. */
1261#define VERR_VMX_INVALID_GUEST_STATE (-4014)
1262/** Unexpected VM exit code. */
1263#define VERR_VMX_UNEXPECTED_EXIT_CODE (-4015)
1264/** Unexpected VM exception code. */
1265#define VERR_VMX_UNEXPECTED_EXCEPTION (-4016)
1266/** Unexpected interruption exit code. */
1267#define VERR_VMX_UNEXPECTED_INTERRUPTION_EXIT_CODE (-4017)
1268/** Running for too long, return to ring 3. */
1269#define VINF_VMX_PREEMPT_PENDING (4018)
1270/** @} */
1271
1272
1273/** @name VBox SVM Status Codes
1274 * @{
1275 */
1276/** Unable to start VM execution. */
1277#define VERR_SVM_UNABLE_TO_START_VM (-4050)
1278/** SVM bit not set in K6_EFER MSR */
1279#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
1280/** SVM CPU extension not available. */
1281#define VERR_SVM_NO_SVM (-4052)
1282/** SVM CPU extension disabled (by BIOS). */
1283#define VERR_SVM_DISABLED (-4053)
1284/** Running for too long, return to ring 3. */
1285#define VINF_SVM_PREEMPT_PENDING VINF_VMX_PREEMPT_PENDING
1286/** @} */
1287
1288
1289/** @name VBox HWACCM Status Codes
1290 * @{
1291 */
1292/** Unable to start VM execution. */
1293#define VERR_HWACCM_UNKNOWN_CPU (-4100)
1294/** No CPUID support. */
1295#define VERR_HWACCM_NO_CPUID (-4101)
1296/** Host is about to go into suspend mode. */
1297#define VERR_HWACCM_SUSPEND_PENDING (-4102)
1298/** Conflicting CFGM values. */
1299#define VERR_HWACCM_CONFIG_MISMATCH (-4103)
1300/** @} */
1301
1302
1303/** @name VBox Disassembler Status Codes
1304 * @{
1305 */
1306/** Invalid opcode byte(s) */
1307#define VERR_DIS_INVALID_OPCODE (-4200)
1308/** Generic failure during disassembly. */
1309#define VERR_DIS_GEN_FAILURE (-4201)
1310/** @} */
1311
1312
1313/** @name VBox Webservice Status Codes
1314 * @{
1315 */
1316/** Authentication failed (ISessionManager::logon()) */
1317#define VERR_WEB_NOT_AUTHENTICATED (-4300)
1318/** Invalid format of managed object reference */
1319#define VERR_WEB_INVALID_MANAGED_OBJECT_REFERENCE (-4301)
1320/** Invalid session ID in managed object reference */
1321#define VERR_WEB_INVALID_SESSION_ID (-4302)
1322/** Invalid object ID in managed object reference */
1323#define VERR_WEB_INVALID_OBJECT_ID (-4303)
1324/** Unsupported interface for managed object reference */
1325#define VERR_WEB_UNSUPPORTED_INTERFACE (-4304)
1326/** @} */
1327
1328
1329/** @name VBox PARAV Status Codes
1330 * @{
1331 */
1332/** Switch back to host */
1333#define VINF_PARAV_SWITCH_TO_HOST 4400
1334
1335/** @} */
1336
1337/* SED-END */
1338
1339
1340/** @def VBOX_SUCCESS
1341 * Check for success.
1342 *
1343 * @returns true if rc indicates success.
1344 * @returns false if rc indicates failure.
1345 *
1346 * @param rc The iprt status code to test.
1347 */
1348#define VBOX_SUCCESS(rc) RT_SUCCESS(rc)
1349
1350/** @def VBOX_FAILURE
1351 * Check for failure.
1352 *
1353 * @returns true if rc indicates failure.
1354 * @returns false if rc indicates success.
1355 *
1356 * @param rc The iprt status code to test.
1357 */
1358#define VBOX_FAILURE(rc) RT_FAILURE(rc)
1359
1360/** @} */
1361
1362
1363#endif
1364
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette