err.h@ 5142

Last change on this file since 5142 was 5142, checked in by vboxsync, 17 years ago
More GMM code.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 53.8 KB

Line
1	/** @file
2	* VirtualBox Status Codes.
3	*/
4
5	/*
6	* Copyright (C) 2006-2007 innotek GmbH
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License as published by the Free Software Foundation,
12	* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
13	* distribution. VirtualBox OSE is distributed in the hope that it will
14	* be useful, but WITHOUT ANY WARRANTY of any kind.
15	*/
16
17	#ifndef ___VBox_err_h
18	#define ___VBox_err_h
19
20	#include <VBox/cdefs.h>
21	#include <iprt/err.h>
22
23
24	/** @defgroup grp_err Error Codes
25	* @{
26	*/
27
28	/* SED-START */
29
30	/** @name Misc. Status Codes
31	* @{
32	*/
33	/** Failed to allocate VM memory. */
34	#define VERR_NO_VM_MEMORY (-1000)
35	/** GC is toasted and the VMM should be terminated at once, but no need to panic about it :-) */
36	#define VERR_DONT_PANIC (-1001)
37	/** Unsupported CPU. */
38	#define VERR_UNSUPPORTED_CPU (-1002)
39	/** Unsupported CPU mode. */
40	#define VERR_UNSUPPORTED_CPU_MODE (-1003)
41	/** Page not present. */
42	#define VERR_PAGE_NOT_PRESENT (-1004)
43	/** Invalid/Corrupted configuration file. */
44	#define VERR_CFG_INVALID_FORMAT (-1005)
45	/** No configuration value exists. */
46	#define VERR_CFG_NO_VALUE (-1006)
47	/** Not selector not present. */
48	#define VERR_SELECTOR_NOT_PRESENT (-1007)
49	/** Not code selector. */
50	#define VERR_NOT_CODE_SELECTOR (-1008)
51	/** Not data selector. */
52	#define VERR_NOT_DATA_SELECTOR (-1009)
53	/** Out of selector bounds. */
54	#define VERR_OUT_OF_SELECTOR_BOUNDS (-1010)
55	/** Invalid selector. Usually beyond table limits. */
56	#define VERR_INVALID_SELECTOR (-1011)
57	/** Invalid requested privilegde level. */
58	#define VERR_INVALID_RPL (-1012)
59	/** @} */
60
61
62	/** @name Execution Monitor/Manager (EM) Status Codes
63	*
64	* The order of the status codes between VINF_EM_FIRST and VINF_EM_LAST
65	* are of vital importance. The lower the number the higher importance
66	* as a scheduling instruction.
67	* @{
68	*/
69	/** First scheduling related status code. */
70	#define VINF_EM_FIRST 1100
71	/** Indicating that the VM is being terminated and that the the execution
72	* shall stop. */
73	#define VINF_EM_TERMINATE 1100
74	/** Hypervisor code was stepped.
75	* EM will first send this to the debugger, and if the issue isn't
76	* resolved there it will enter guru meditation. */
77	#define VINF_EM_DBG_HYPER_STEPPED 1101
78	/** Hit a breakpoint in the hypervisor code,
79	* EM will first send this to the debugger, and if the issue isn't
80	* resolved there it will enter guru meditation. */
81	#define VINF_EM_DBG_HYPER_BREAKPOINT 1102
82	/** Hit a possible assertion in the hypervisor code,
83	* EM will first send this to the debugger, and if the issue isn't
84	* resolved there it will enter guru meditation. */
85	#define VINF_EM_DBG_HYPER_ASSERTION 1103
86	/** Indicating that the VM should be suspended for debugging because
87	* the developer wants to inspect the VM state. */
88	#define VINF_EM_DBG_STOP 1104
89	/** Indicating success single stepping and that EM should report that
90	* event to the debugger. */
91	#define VINF_EM_DBG_STEPPED 1105
92	/** Indicating that a breakpoint was hit and that EM should notify the debugger
93	* and in the event there is no debugger fail fatally. */
94	#define VINF_EM_DBG_BREAKPOINT 1106
95	/** Indicating that EM should single step an instruction.
96	* The instruction is stepped in the current execution mode (RAW/REM). */
97	#define VINF_EM_DBG_STEP 1107
98	/** Indicating that the VM is being turned off and that the EM should
99	* exit to the VM awaiting the destruction request. */
100	#define VINF_EM_OFF 1108
101	/** Indicating that the VM has been reset and that scheduling goes
102	* back to startup defaults. */
103	#define VINF_EM_RESET 1109
104	/** Indicating that the VM has been suspended and that the the thread
105	* should wait for request telling it what to do next. */
106	#define VINF_EM_SUSPEND 1110
107	/** Indicating that the VM has executed a halt instruction and that
108	* the emulation thread should wait for an interrupt before resuming
109	* execution. */
110	#define VINF_EM_HALT 1111
111	/** Indicating that the VM has been resumed and that the thread should
112	* start executing. */
113	#define VINF_EM_RESUME 1112
114	/** Indicating that we've got an out-of-memory condition and that we need
115	* to take the appropriate actions to deal with this.
116	* @remarks It might seem odd at first that this has lower priority than VINF_EM_HALT,
117	* VINF_EM_SUSPEND, and VINF_EM_RESUME. The reason is that these events are
118	* vital to correctly operating the VM. Also, they can't normally occur together
119	* with an out-of-memory condition, and even if that should happen the condition
120	* will be rediscovered before executing any more code. */
121	#define VINF_EM_NO_MEMORY 1113
122	/** The fatal variant of VINF_EM_NO_MEMORY. */
123	#define VERR_EM_NO_MEMORY (-1113)
124	/** Indicating that a rescheduling to recompiled execution.
125	* Typically caused by raw-mode executing code which is difficult/slow
126	* to virtualize rawly.
127	* @remarks Important to have a higher priority (lower number) than the other rescheduling status codes. */
128	#define VINF_EM_RESCHEDULE_REM 1114
129	/** Indicating that a rescheduling to vmx-mode execution.
130	* Typically caused by REM detecting that hardware-accelerated raw-mode execution is possible. */
131	#define VINF_EM_RESCHEDULE_HWACC 1115
132	/** Indicating that a rescheduling to raw-mode execution.
133	* Typically caused by REM detecting that raw-mode execution is possible.
134	* @remarks Important to have a higher priority (lower number) than VINF_EM_RESCHEDULE. */
135	#define VINF_EM_RESCHEDULE_RAW 1116
136	/** Indicating that a rescheduling now is required. Typically caused by
137	* interrupts having changed the EIP. */
138	#define VINF_EM_RESCHEDULE 1117
139	/** Last scheduling related status code. (inclusive) */
140	#define VINF_EM_LAST 1117
141
142	/** Reason for leaving GC: Guest trap which couldn't be handled in GC.
143	* The trap is generally forwared to the REM and executed there. */
144	#define VINF_EM_RAW_GUEST_TRAP 1120
145	/** Reason for leaving GC: Interrupted by external interrupt.
146	* The interrupt needed to be handled by the host OS. */
147	#define VINF_EM_RAW_INTERRUPT 1121
148	/** Reason for leaving GC: Interrupted by external interrupt while in hypervisor code.
149	* The interrupt needed to be handled by the host OS and hypervisor execution must be
150	* resumed. VM state is not complete at this point. */
151	#define VINF_EM_RAW_INTERRUPT_HYPER 1122
152	/** Reason for leaving GC: A Ring switch was attempted.
153	* Normal cause of action is to execute this in REM. */
154	#define VINF_EM_RAW_RING_SWITCH 1123
155	/** Reason for leaving GC: A Ring switch was attempted using software interrupt.
156	* Normal cause of action is to execute this in REM. */
157	#define VINF_EM_RAW_RING_SWITCH_INT 1124
158	/** Reason for leaving GC: A privileged instruction was attempted executed.
159	* Normal cause of action is to execute this in REM. */
160	#define VINF_EM_RAW_EXCEPTION_PRIVILEGED 1125
161
162	/** Reason for leaving GC: Emulate instruction. */
163	#define VINF_EM_RAW_EMULATE_INSTR 1126
164	/** Reason for leaving GC: Unhandled TSS write.
165	* Recompiler gets control. */
166	#define VINF_EM_RAW_EMULATE_INSTR_TSS_FAULT 1127
167	/** Reason for leaving GC: Unhandled LDT write.
168	* Recompiler gets control. */
169	#define VINF_EM_RAW_EMULATE_INSTR_LDT_FAULT 1128
170	/** Reason for leaving GC: Unhandled IDT write.
171	* Recompiler gets control. */
172	#define VINF_EM_RAW_EMULATE_INSTR_IDT_FAULT 1129
173	/** Reason for leaving GC: Unhandled GDT write.
174	* Recompiler gets control. */
175	#define VINF_EM_RAW_EMULATE_INSTR_GDT_FAULT 1130
176	/** Reason for leaving GC: Unhandled Page Directory write.
177	* Recompiler gets control. */
178	#define VINF_EM_RAW_EMULATE_INSTR_PD_FAULT 1131
179	/** Reason for leaving GC: jump inside generated patch jump.
180	* Fatal error. */
181	#define VERR_EM_RAW_PATCH_CONFLICT (-1132)
182	/** Reason for leaving GC: Hlt instruction.
183	* Recompiler gets control. */
184	#define VINF_EM_RAW_EMULATE_INSTR_HLT 1133
185	/** Reason for leaving GC: Ring-3 operation pending. */
186	#define VINF_EM_RAW_TO_R3 1134
187	/** Reason for leaving GC: Timer pending. */
188	#define VINF_EM_RAW_TIMER_PENDING 1135
189	/** Reason for leaving GC: Interrupt pending (guest). */
190	#define VINF_EM_RAW_INTERRUPT_PENDING 1136
191	/** Reason for leaving GC: Encountered a stale selector. */
192	#define VINF_EM_RAW_STALE_SELECTOR 1137
193	/** Reason for leaving GC: The IRET resuming guest code trapped. */
194	#define VINF_EM_RAW_IRET_TRAP 1138
195	/** The interpreter was unable to deal with the instruction at hand. */
196	#define VERR_EM_INTERPRETER (-1148)
197	/** Internal EM error caused by an unknown warning or informational status code. */
198	#define VERR_EM_INTERNAL_ERROR (-1149)
199	/** Pending VM request packet. */
200	#define VINF_EM_PENDING_REQUEST (-1150)
201	/** @} */
202
203
204	/** @name Debugging Facility (DBGF) DBGF Status Codes
205	* @{
206	*/
207	/** The function called requires the caller to be attached as a
208	* debugger to the VM. */
209	#define VERR_DBGF_NOT_ATTACHED (-1200)
210	/** Someone (including the caller) was already attached as
211	* debugger to the VM. */
212	#define VERR_DBGF_ALREADY_ATTACHED (-1201)
213	/** Tried to hald a debugger which was already halted.
214	* (This is a warning and not an error.) */
215	#define VWRN_DBGF_ALREADY_HALTED 1202
216	/** The DBGF has no more free breakpoint slots. */
217	#define VERR_DBGF_NO_MORE_BP_SLOTS (-1203)
218	/** The DBGF couldn't find the specified breakpoint. */
219	#define VERR_DBGF_BP_NOT_FOUND (-1204)
220	/** Attempted to enabled a breakpoint which was already enabled. */
221	#define VINF_DBGF_BP_ALREADY_ENABLED 1205
222	/** Attempted to disabled a breakpoint which was already disabled. */
223	#define VINF_DBGF_BP_ALREADY_DISABLED 1206
224	/** The breakpoint already exists. */
225	#define VINF_DBGF_BP_ALREADY_EXIST 1207
226	/** @} */
227
228
229	/** @name Patch Manager (PATM) Status Codes
230	* @{
231	*/
232	/** Non fatal Patch Manager analysis phase warning */
233	#define VWRN_CONTINUE_ANALYSIS 1400
234	/** Non fatal Patch Manager recompile phase warning (mapped to VWRN_CONTINUE_ANALYSIS). */
235	#define VWRN_CONTINUE_RECOMPILE VWRN_CONTINUE_ANALYSIS
236	/** Continue search (mapped to VWRN_CONTINUE_ANALYSIS). */
237	#define VWRN_PATM_CONTINUE_SEARCH VWRN_CONTINUE_ANALYSIS
238	/** Patch installation refused (patch too complex or unsupported instructions ) */
239	#define VERR_PATCHING_REFUSED (-1401)
240	/** Unable to find patch */
241	#define VERR_PATCH_NOT_FOUND (-1402)
242	/** Patch disabled */
243	#define VERR_PATCH_DISABLED (-1403)
244	/** Patch enabled */
245	#define VWRN_PATCH_ENABLED 1404
246	/** Patch was already disabled */
247	#define VERR_PATCH_ALREADY_DISABLED (-1405)
248	/** Patch was already enabled */
249	#define VERR_PATCH_ALREADY_ENABLED (-1406)
250	/** Patch was removed. */
251	#define VWRN_PATCH_REMOVED 1408
252
253	/** Reason for leaving GC: \#GP with EIP pointing to patch code. */
254	#define VINF_PATM_PATCH_TRAP_GP 1408
255	/** First leave GC code. */
256	#define VINF_PATM_LEAVEGC_FIRST VINF_PATM_PATCH_TRAP_GP
257	/** Reason for leaving GC: \#PF with EIP pointing to patch code. */
258	#define VINF_PATM_PATCH_TRAP_PF 1409
259	/** Reason for leaving GC: int3 with EIP pointing to patch code. */
260	#define VINF_PATM_PATCH_INT3 1410
261	/** Reason for leaving GC: \#PF for monitored patch page. */
262	#define VINF_PATM_CHECK_PATCH_PAGE 1411
263	/** Reason for leaving GC: duplicate instruction called at current eip. */
264	#define VINF_PATM_DUPLICATE_FUNCTION 1412
265	/** Execute one instruction with the recompiler */
266	#define VINF_PATCH_EMULATE_INSTR 1413
267	/** Reason for leaving GC: attempt to patch MMIO write. */
268	#define VINF_PATM_HC_MMIO_PATCH_WRITE 1414
269	/** Reason for leaving GC: attempt to patch MMIO read. */
270	#define VINF_PATM_HC_MMIO_PATCH_READ 1415
271	/** Reason for leaving GC: pending irq after iret that sets IF. */
272	#define VINF_PATM_PENDING_IRQ_AFTER_IRET 1416
273	/** Last leave GC code. */
274	#define VINF_PATM_LEAVEGC_LAST VINF_PATM_PENDING_IRQ_AFTER_IRET
275
276	/** No conflicts to resolve */
277	#define VERR_PATCH_NO_CONFLICT (-1425)
278	/** Detected unsafe code for patching */
279	#define VERR_PATM_UNSAFE_CODE (-1426)
280	/** Terminate search branch */
281	#define VWRN_PATCH_END_BRANCH 1427
282	/** Already patched */
283	#define VERR_PATM_ALREADY_PATCHED (-1428)
284	/** Spinlock detection failed. */
285	#define VINF_PATM_SPINLOCK_FAILED (1429)
286	/** Continue execution after patch trap. */
287	#define VINF_PATCH_CONTINUE (1430)
288
289	/** @} */
290
291
292	/** @name Code Scanning and Analysis Manager (CSAM) Status Codes
293	* @{
294	*/
295	/** Trap not handled */
296	#define VWRN_CSAM_TRAP_NOT_HANDLED 1500
297	/** Patch installed */
298	#define VWRN_CSAM_INSTRUCTION_PATCHED 1501
299	/** Page record not found */
300	#define VWRN_CSAM_PAGE_NOT_FOUND 1502
301	/** Reason for leaving GC: CSAM wants perform a task in ring-3. */
302	#define VINF_CSAM_PENDING_ACTION 1503
303	/** @} */
304
305
306	/** @name Page Monitor/Manager (PGM) Status Codes
307	* @{
308	*/
309	/** Attempt to create a GC mapping which conflicts with an existing mapping. */
310	#define VERR_PGM_MAPPING_CONFLICT (-1600)
311	/** The physical handler range has no corresponding RAM range.
312	* If this is MMIO, see todo above the return. If not MMIO, then it's
313	* someone else's fault... */
314	#define VERR_PGM_HANDLER_PHYSICAL_NO_RAM_RANGE (-1601)
315	/** Attempt to register an access handler for a virtual range of which a part
316	* was already handled. */
317	#define VERR_PGM_HANDLER_VIRTUAL_CONFLICT (-1602)
318	/** Attempt to register an access handler for a physical range of which a part
319	* was already handled. */
320	#define VERR_PGM_HANDLER_PHYSICAL_CONFLICT (-1603)
321	/** Invalid page directory specified to PGM. */
322	#define VERR_PGM_INVALID_PAGE_DIRECTORY (-1604)
323	/** Invalid GC physical address. */
324	#define VERR_PGM_INVALID_GC_PHYSICAL_ADDRESS (-1605)
325	/** Invalid GC physical range. Usually used when a specified range crosses
326	* a RAM region boundrary. */
327	#define VERR_PGM_INVALID_GC_PHYSICAL_RANGE (-1606)
328	/** Specified access handler was not found. */
329	#define VERR_PGM_HANDLER_NOT_FOUND (-1607)
330	/** Attempt to register a RAM range of which parts are already
331	* covered by existing RAM ranges. */
332	#define VERR_PGM_RAM_CONFLICT (-1608)
333	/** Failed to add new mappings because the current mappings are fixed
334	* in guest os memory. */
335	#define VERR_PGM_MAPPINGS_FIXED (-1609)
336	/** Failed to fix mappings because of a conflict with the intermediate code. */
337	#define VERR_PGM_MAPPINGS_FIX_CONFLICT (-1610)
338	/** Failed to fix mappings because a mapping rejected the address. */
339	#define VERR_PGM_MAPPINGS_FIX_REJECTED (-1611)
340	/** Failed to fix mappings because the proposed memory area was to small. */
341	#define VERR_PGM_MAPPINGS_FIX_TOO_SMALL (-1612)
342	/** Reason for leaving GC: The urge to syncing CR3. */
343	#define VINF_PGM_SYNC_CR3 1613
344	/** Page not marked for dirty bit tracking */
345	#define VINF_PGM_NO_DIRTY_BIT_TRACKING 1614
346	/** Page fault caused by dirty bit tracking; corrected */
347	#define VINF_PGM_HANDLED_DIRTY_BIT_FAULT 1615
348	/** Go ahead with the default Read/Write operation.
349	* This is returned by a HC physical or virtual handler when it wants the PGMPhys[Read\|Write]
350	* routine do the reading/writing. */
351	#define VINF_PGM_HANDLER_DO_DEFAULT 1616
352	/** The paging mode of the host is not supported yet. */
353	#define VERR_PGM_UNSUPPORTED_HOST_PAGING_MODE (-1617)
354	/** The physical guest page is a reserved/mmio page and does not have any HC address. */
355	#define VERR_PGM_PHYS_PAGE_RESERVED (-1618)
356	/** No page directory available for the hypervisor. */
357	#define VERR_PGM_NO_HYPERVISOR_ADDRESS (-1619)
358	/** The shadow page pool was flushed.
359	* This means that a global CR3 sync was flagged. Anyone receiving this kind of status
360	* will have to get down to a SyncCR3 ASAP. See also VINF_PGM_SYNC_CR3. */
361	#define VERR_PGM_POOL_FLUSHED (-1620)
362	/** The shadow page pool was cleared.
363	* This is a error code internal to the shadow page pool, it will be
364	* converted to a VERR_PGM_POOL_FLUSHED before leaving the pool code. */
365	#define VERR_PGM_POOL_CLEARED (-1621)
366	/** The returned shadow page is cached. */
367	#define VINF_PGM_CACHED_PAGE 1622
368	/** Returned by handler registration, modification and deregistration
369	* when the shadow PTs could be updated because the guest page
370	* aliased or/and mapped by multiple PTs. */
371	#define VINF_PGM_GCPHYS_ALIASED 1623
372	/** Reason for leaving GC: Paging mode changed.
373	* PGMChangeMode() uses this to force a switch to HC so it can safely
374	* deal with a mode switch.
375	*/
376	#define VINF_PGM_CHANGE_MODE 1624
377	/** SyncPage modified the PDE.
378	* This is an internal status code used to communicate back to the \#PF handler
379	* that the PDE was (probably) marked not-present and it should restart the instruction. */
380	#define VINF_PGM_SYNCPAGE_MODIFIED_PDE 1625
381	/** Physical range crosses dynamic ram chunk boundary; translation to HC ptr not safe. */
382	#define VERR_PGM_GCPHYS_RANGE_CROSSES_BOUNDARY (-1626)
383	/** @} */
384
385
386	/** @name Memory Monitor (MM) Status Codes
387	* @{
388	*/
389	/** Attempt to register a RAM range of which parts are already
390	* covered by existing RAM ranges. */
391	#define VERR_MM_RAM_CONFLICT (-1700)
392	/** Hypervisor memory allocation failed. */
393	#define VERR_MM_HYPER_NO_MEMORY (-1701)
394
395	/** @} */
396
397
398	/** @name Save State Manager (SSM) Status Codes
399	* @{
400	*/
401	/** The specified data unit already exist. */
402	#define VERR_SSM_UNIT_EXISTS (-1800)
403	/** The specified data unit wasn't found. */
404	#define VERR_SSM_UNIT_NOT_FOUND (-1801)
405	/** The specified data unit wasn't owned by caller. */
406	#define VERR_SSM_UNIT_NOT_OWNER (-1802)
407	/** General saved state file integrity error. */
408	#define VERR_SSM_INTEGRITY (-1810)
409	/** The saved state file magic was not recognized. */
410	#define VERR_SSM_INTEGRITY_MAGIC (-1811)
411	/** The saved state file magic was not recognized. */
412	#define VERR_SSM_INTEGRITY_VERSION (-1812)
413	/** The saved state file magic was not recognized. */
414	#define VERR_SSM_INTEGRITY_SIZE (-1813)
415	/** The CRC of the saved state file did match. */
416	#define VERR_SSM_INTEGRITY_CRC (-1814)
417	/** The current virtual machine id didn't match the virtual machine id. */
418	#define VERR_SMM_INTEGRITY_MACHINE (-1815)
419	/** Invalid unit magic (internal data tag). */
420	#define VERR_SSM_INTEGRITY_UNIT_MAGIC (-1816)
421	/** The file contained a data unit which no-one wants. */
422	#define VERR_SSM_INTEGRITY_UNIT_NOT_FOUND (-1817)
423	/** A data unit in the saved state file was defined but didn't any
424	* routine for processing it. */
425	#define VERR_SSM_NO_LOAD_EXEC (-1818)
426	/** A restore routine attempted to load more data then the unit contained. */
427	#define VERR_SSM_LOADED_TOO_MUCH (-1819)
428	/** Not in the correct state for the attempted operation. */
429	#define VERR_SSM_INVALID_STATE (-1820)
430
431	/** Unsupported data unit version.
432	* A SSM user returns this if it doesn't know the u32Version. */
433	#define VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION (-1821)
434	/** The format of a data unit has changed.
435	* A SSM user returns this if it's not able to read the format for
436	* other reasons than u32Version. */
437	#define VERR_SSM_DATA_UNIT_FORMAT_CHANGED (-1822)
438	/** The CPUID instruction returns different information when loading than when saved.
439	* Normally caused by hardware changes on the host, but could also be caused by
440	* changes in the BIOS setup. */
441	#define VERR_SSM_LOAD_CPUID_MISMATCH (-1823)
442	/** The RAM size differes between the saved state and the VM config. */
443	#define VERR_SSM_LOAD_MEMORY_SIZE_MISMATCH (-1824)
444	/** The state doesn't match the VM configuration in one or another way.
445	* (There are certain PCI reconfiguration which the OS could potentially
446	* do which can cause this problem. Check this out when it happens.) */
447	#define VERR_SSM_LOAD_CONFIG_MISMATCH (-1825)
448	/** The virtual clock freqency differs too much.
449	* The clock source for the virtual time isn't reliable or the code have changed. */
450	#define VERR_SSM_VIRTUAL_CLOCK_HZ (-1826)
451	/** A timeout occured while waiting for async IDE operations to finish. */
452	#define VERR_SSM_IDE_ASYNC_TIMEOUT (-1827)
453	/** One of the structure magics was wrong. */
454	#define VERR_SSM_STRUCTURE_MAGIC (-1828)
455	/** The data in the saved state doesn't confirm to expectations. */
456	#define VERR_SSM_UNEXPECTED_DATA (-1829)
457	/** @} */
458
459
460	/** @name Virtual Machine (VM) Status Codes
461	* @{
462	*/
463	/** The specified at reset handler wasn't found. */
464	#define VERR_VM_ATRESET_NOT_FOUND (-1900)
465	/** Invalid VM request type.
466	* For the VMR3ReqAlloc() case, the caller just specified an illegal enmType. For
467	* all the other occurences it means indicates corruption, broken logic, or stupid
468	* interface user. */
469	#define VERR_VM_REQUEST_INVALID_TYPE (-1901)
470	/** Invalid VM request state.
471	* The state of the request packet was not the expected and accepted one(s). Either
472	* the interface user screwed up, or we've got corruption/broken logic. */
473	#define VERR_VM_REQUEST_STATE (-1902)
474	/** Invalid VM request packet.
475	* One or more of the the VM controlled packet members didn't contain the correct
476	* values. Some thing's broken. */
477	#define VERR_VM_REQUEST_INVALID_PACKAGE (-1903)
478	/** The status field has not been updated yet as the request is still
479	* pending completion. Someone queried the iStatus field before the request
480	* has been fully processed. */
481	#define VERR_VM_REQUEST_STATUS_STILL_PENDING (-1904)
482	/** The request has been freed, don't read the status now.
483	* Someone is reading the iStatus field of a freed request packet. */
484	#define VERR_VM_REQUEST_STATUS_FREED (-1905)
485	/** A VM api requiring EMT was called from another thread.
486	* Use the VMR3ReqCall() apis to call it! */
487	#define VERR_VM_THREAD_NOT_EMT (-1906)
488	/** The VM state was invalid for the requested operation.
489	* Go check the 'VM Statechart Diagram.gif'. */
490	#define VERR_VM_INVALID_VM_STATE (-1907)
491	/** The support driver is not installed.
492	* On linux, open returned ENOENT. */
493	#define VERR_VM_DRIVER_NOT_INSTALLED (-1908)
494	/** The support driver is not accessible.
495	* On linux, open returned EPERM. */
496	#define VERR_VM_DRIVER_NOT_ACCESSIBLE (-1909)
497	/** Was not able to load the support driver.
498	* On linux, open returned ENODEV. */
499	#define VERR_VM_DRIVER_LOAD_ERROR (-1910)
500	/** Was not able to open the support driver.
501	* Generic open error used when none of the other ones fit. */
502	#define VERR_VM_DRIVER_OPEN_ERROR (-1911)
503	/** The installed support driver doesn't match the version of the user. */
504	#define VERR_VM_DRIVER_VERSION_MISMATCH (-1912)
505	/** Saving the VM state is temporarily not allowed. Try again later. */
506	#define VERR_VM_SAVE_STATE_NOT_ALLOWED (-1913)
507	/** @} */
508
509
510	/** @name VBox Remote Desktop Protocol (VRDP) Status Codes
511	* @{
512	*/
513	/** Successful completion of operation (mapped to generic iprt status code). */
514	#define VINF_VRDP_SUCCESS VINF_SUCCESS
515	/** VRDP transport operation timed out (mapped to generic iprt status code). */
516	#define VERR_VRDP_TIMEOUT VERR_TIMEOUT
517
518	/** Unsupported ISO protocol feature */
519	#define VERR_VRDP_ISO_UNSUPPORTED (-2000)
520	/** Security (en/decryption) engine error */
521	#define VERR_VRDP_SEC_ENGINE_FAIL (-2001)
522	/** VRDP protocol violation */
523	#define VERR_VRDP_PROTOCOL_ERROR (-2002)
524	/** Unsupported VRDP protocol feature */
525	#define VERR_VRDP_NOT_SUPPORTED (-2003)
526	/** VRDP protocol violation, client sends less data than expected */
527	#define VERR_VRDP_INSUFFICIENT_DATA (-2004)
528	/** Internal error, VRDP packet is in wrong operation mode */
529	#define VERR_VRDP_INVALID_MODE (-2005)
530	/** Memory allocation failed */
531	#define VERR_VRDP_NO_MEMORY (-2006)
532	/** Client has been rejected */
533	#define VERR_VRDP_ACCESS_DENIED (-2007)
534	/** VRPD receives a packet that is not supported */
535	#define VWRN_VRDP_PDU_NOT_SUPPORTED 2008
536	/** VRDP script allowed the packet to be processed further */
537	#define VINF_VRDP_PROCESS_PDU 2009
538	/** VRDP script has completed its task */
539	#define VINF_VRDP_OPERATION_COMPLETED 2010
540	/** VRDP thread has started OK and will run */
541	#define VINF_VRDP_THREAD_STARTED 2011
542	/** Framebuffer is resized, terminate send bitmap procedure */
543	#define VINF_VRDP_RESIZE_REQUESTED 2012
544	/** Output can be enabled for the client. */
545	#define VINF_VRDP_OUTPUT_ENABLE 2013
546	/** @} */
547
548
549	/** @name Configuration Manager (CFGM) Status Codes
550	* @{
551	*/
552	/** The integer value was too big for the requested representation. */
553	#define VERR_CFGM_INTEGER_TOO_BIG (-2100)
554	/** Child node was not found. */
555	#define VERR_CFGM_CHILD_NOT_FOUND (-2101)
556	/** Path to child node was invalid (i.e. empty). */
557	#define VERR_CFGM_INVALID_CHILD_PATH (-2102)
558	/** Value not found. */
559	#define VERR_CFGM_VALUE_NOT_FOUND (-2103)
560	/** No parent node specified. */
561	#define VERR_CFGM_NO_PARENT (-2104)
562	/** No node was specified. */
563	#define VERR_CFGM_NO_NODE (-2105)
564	/** The value is not an integer. */
565	#define VERR_CFGM_NOT_INTEGER (-2106)
566	/** The value is not a zero terminated character string. */
567	#define VERR_CFGM_NOT_STRING (-2107)
568	/** The value is not a byte string. */
569	#define VERR_CFGM_NOT_BYTES (-2108)
570	/** The specified string / bytes buffer was to small. Specify a larger one and retry. */
571	#define VERR_CFGM_NOT_ENOUGH_SPACE (-2109)
572	/** The path of a new node contained slashs or was empty. */
573	#define VERR_CFGM_INVALID_NODE_PATH (-2160)
574	/** A new node couldn't be inserted because one with the same name exists. */
575	#define VERR_CFGM_NODE_EXISTS (-2161)
576	/** A new leaf couldn't be inserted because one with the same name exists. */
577	#define VERR_CFGM_LEAF_EXISTS (-2162)
578	/** @} */
579
580
581	/** @name Time Manager (TM) Status Codes
582	* @{
583	*/
584	/** The loaded timer state was incorrect. */
585	#define VERR_TM_LOAD_STATE (-2200)
586	/** The timer was not in the correct state for the request operation. */
587	#define VERR_TM_INVALID_STATE (-2201)
588	/** The timer was in a unknown state. Corruption or stupid coding error. */
589	#define VERR_TM_UNKNOWN_STATE (-2202)
590	/** The timer was stuck in an unstable state until we grew impatient and returned. */
591	#define VERR_TM_UNSTABLE_STATE (-2203)
592	/** @} */
593
594
595	/** @name Recompiled Execution Manager (REM) Status Codes
596	* @{
597	*/
598	/** Fatal error in virtual hardware. */
599	#define VERR_REM_VIRTUAL_HARDWARE_ERROR (-2300)
600	/** Fatal error in the recompiler cpu. */
601	#define VERR_REM_VIRTUAL_CPU_ERROR (-2301)
602	/** Recompiler execution was interrupted by forced action. */
603	#define VINF_REM_INTERRUPED_FF 2302
604	/** Reason for leaving GC: Must flush pending invlpg operations to REM.
605	* Tell REM to flush page invalidations. Will temporary go to REM context
606	* from REM and perform the flushes. */
607	#define VERR_REM_FLUSHED_PAGES_OVERFLOW (-2303)
608	/** Too many similar traps. This is a very useful debug only
609	* check (we don't do double/tripple faults in REM). */
610	#define VERR_REM_TOO_MANY_TRAPS (-2304)
611	/** The REM is out of breakpoint slots. */
612	#define VERR_REM_NO_MORE_BP_SLOTS (-2305)
613	/** The REM could not find any breakpoint on the specified address. */
614	#define VERR_REM_BP_NOT_FOUND (-2306)
615	/** @} */
616
617
618	/** @name Trap Manager / Monitor (TRPM) Status Codes
619	* @{
620	*/
621	/** No active trap. Cannot query or reset a non-existing trap. */
622	#define VERR_TRPM_NO_ACTIVE_TRAP (-2400)
623	/** Active trap. Cannot assert a new trap when when one is already active. */
624	#define VERR_TRPM_ACTIVE_TRAP (-2401)
625	/** Reason for leaving GC: Guest tried to write to our IDT - fatal.
626	* The VM will be terminated assuming the worst, i.e. that the
627	* guest has read the idtr register. */
628	#define VERR_TRPM_SHADOW_IDT_WRITE (-2402)
629	/** Reason for leaving GC: Fatal trap in hypervisor. */
630	#define VERR_TRPM_DONT_PANIC (-2403)
631	/** Reason for leaving GC: Double Fault. */
632	#define VERR_TRPM_PANIC (-2404)
633	/** The exception was dispatched for raw-mode execution. */
634	#define VINF_TRPM_XCPT_DISPATCHED 2405
635	/** @} */
636
637
638	/** @name Selector Manager / Monitor (SELM) Status Code
639	* @{
640	*/
641	/** Reason for leaving GC: Guest tried to write to our GDT - fatal.
642	* The VM will be terminated assuming the worst, i.e. that the
643	* guest has read the gdtr register. */
644	#define VERR_SELM_SHADOW_GDT_WRITE (-2500)
645	/** Reason for leaving GC: Guest tried to write to our LDT - fatal.
646	* The VM will be terminated assuming the worst, i.e. that the
647	* guest has read the ldtr register. */
648	#define VERR_SELM_SHADOW_LDT_WRITE (-2501)
649	/** Reason for leaving GC: Guest tried to write to our TSS - fatal.
650	* The VM will be terminated assuming the worst, i.e. that the
651	* guest has read the ltr register. */
652	#define VERR_SELM_SHADOW_TSS_WRITE (-2502)
653	/** Reason for leaving GC: Sync the GDT table to solve a conflict. */
654	#define VINF_SELM_SYNC_GDT 2503
655	/** No valid TSS present. */
656	#define VERR_SELM_NO_TSS (-2504)
657	/** @} */
658
659
660	/** @name I/O Manager / Monitor (IOM) Status Code
661	* @{
662	*/
663	/** The specified I/O port range was invalid.
664	* It was either empty or it was out of bounds. */
665	#define VERR_IOM_INVALID_IOPORT_RANGE (-2600)
666	/** The specified GC I/O port range didn't have a corresponding HC range.
667	* IOMIOPortRegisterHC() must be called before IOMIOPortRegisterGC(). */
668	#define VERR_IOM_NO_HC_IOPORT_RANGE (-2601)
669	/** The specified I/O port range intruded on an existing range. There is
670	* a I/O port conflict between two device, or a device tried to register
671	* the same range twice. */
672	#define VERR_IOM_IOPORT_RANGE_CONFLICT (-2602)
673	/** The I/O port range specified for removal wasn't found or it wasn't contiguous. */
674	#define VERR_IOM_IOPORT_RANGE_NOT_FOUND (-2603)
675	/** The specified I/O port range was owned by some other device(s). Both registration
676	* and deregistration, but in the first case only GC ranges. */
677	#define VERR_IOM_NOT_IOPORT_RANGE_OWNER (-2604)
678
679	/** The specified MMIO range was invalid.
680	* It was either empty or it was out of bounds. */
681	#define VERR_IOM_INVALID_MMIO_RANGE (-2605)
682	/** The specified GC MMIO range didn't have a corresponding HC range.
683	* IOMMMIORegisterHC() must be called before IOMMMIORegisterGC(). */
684	#define VERR_IOM_NO_HC_MMIO_RANGE (-2606)
685	/** The specified MMIO range was owned by some other device(s). Both registration
686	* and deregistration, but in the first case only GC ranges. */
687	#define VERR_IOM_NOT_MMIO_RANGE_OWNER (-2607)
688	/** The specified MMIO range intruded on an existing range. There is
689	* a MMIO conflict between two device, or a device tried to register
690	* the same range twice. */
691	#define VERR_IOM_MMIO_RANGE_CONFLICT (-2608)
692	/** The MMIO range specified for removal was not found. */
693	#define VERR_IOM_MMIO_RANGE_NOT_FOUND (-2609)
694	/** The MMIO range specified for removal was invalid. The range didn't match
695	* quite match a set of existing ranges. It's not possible to remove parts of
696	* a MMIO range, only one or more full ranges. */
697	#define VERR_IOM_INCOMPLETE_MMIO_RANGE (-2610)
698	/** An invalid I/O port size was specified for a read or write operation. */
699	#define VERR_IOM_INVALID_IOPORT_SIZE (-2611)
700	/** The MMIO handler was called for a bogus address! Internal error! */
701	#define VERR_IOM_MMIO_HANDLER_BOGUS_CALL (-2612)
702	/** The MMIO handler experienced a problem with the disassembler. */
703	#define VERR_IOM_MMIO_HANDLER_DISASM_ERROR (-2613)
704	/** The port being read was not present(/unused) and IOM shall return ~0 according to size. */
705	#define VERR_IOM_IOPORT_UNUSED (-2614)
706	/** Unused MMIO register read, fill with 00. */
707	#define VINF_IOM_MMIO_UNUSED_00 2615
708	/** Unused MMIO register read, fill with FF. */
709	#define VINF_IOM_MMIO_UNUSED_FF 2616
710
711	/** Reason for leaving GC: I/O port read. */
712	#define VINF_IOM_HC_IOPORT_READ 2620
713	/** Reason for leaving GC: I/O port write. */
714	#define VINF_IOM_HC_IOPORT_WRITE 2621
715	/** Reason for leaving GC: MMIO write. */
716	#define VINF_IOM_HC_MMIO_READ 2623
717	/** Reason for leaving GC: MMIO read. */
718	#define VINF_IOM_HC_MMIO_WRITE 2624
719	/** Reason for leaving GC: MMIO read/write. */
720	#define VINF_IOM_HC_MMIO_READ_WRITE 2625
721	/** @} */
722
723
724	/** @name Virtual Machine Monitor (VMM) Status Codes
725	* @{
726	*/
727	/** Reason for leaving GC: Calling host function. */
728	#define VINF_VMM_CALL_HOST 2700
729	/** @} */
730
731
732	/** @name Pluggable Device and Driver Manager (PDM) Status Codes
733	* @{
734	*/
735	/** An invalid LUN specification was given. */
736	#define VERR_PDM_NO_SUCH_LUN (-2800)
737	/** A device encountered an unknown configuration value.
738	* This means that the device is potentially misconfigured and the device
739	* construction or unit attachment failed because of this. */
740	#define VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES (-2801)
741	/** The above driver doesn't export a interface required by a driver being
742	* attached to it. Typical misconfiguration problem. */
743	#define VERR_PDM_MISSING_INTERFACE_ABOVE (-2802)
744	/** The below driver doesn't export a interface required by the drive
745	* having attached it. Typical misconfiguration problem. */
746	#define VERR_PDM_MISSING_INTERFACE_BELOW (-2803)
747	/** A device didn't find a required interface with an attached driver.
748	* Typical misconfiguration problem. */
749	#define VERR_PDM_MISSING_INTERFACE (-2804)
750	/** A driver encountered an unknown configuration value.
751	* This means that the driver is potentially misconfigured and the driver
752	* construction. */
753	#define VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES (-2805)
754	/** The PCI bus assigned to a device didn't have room for it.
755	* Either too many devices are configured on the same PCI bus, or there are
756	* some internal problem where PDM/PCI doesn't free up slots when unplugging devices. */
757	#define VERR_PDM_TOO_PCI_MANY_DEVICES (-2806)
758	/** A queue is out of free items, the queueing operation failed. */
759	#define VERR_PDM_NO_QUEUE_ITEMS (-2807)
760	/** Not possible to attach further drivers to the driver.
761	* A driver which doesn't support attachments (below of course) will
762	* return this status code if it found that further drivers were configured
763	* to be attached to it. */
764	#define VERR_PDM_DRVINS_NO_ATTACH (-2808)
765	/** Not possible to attach drivers to the device.
766	* A device which doesn't support attachments (below of course) will
767	* return this status code if it found that drivers were configured
768	* to be attached to it. */
769	#define VERR_PDM_DEVINS_NO_ATTACH (-2809)
770	/** No attached driver.
771	* The PDMDRVHLP::pfnAttach and PDMDEVHLP::pfnDriverAttach will return
772	* this error when no driver was configured to be attached. */
773	#define VERR_PDM_NO_ATTACHED_DRIVER (-2810)
774	/** The media geometry hasn't been set yet, so it cannot be obtained.
775	* The caller should then calculate the geometry from the media size. */
776	#define VERR_PDM_GEOMETRY_NOT_SET (-2811)
777	/** The media translation hasn't been set yet, so it cannot be obtained.
778	* The caller should then guess the translation. */
779	#define VERR_PDM_TRANSLATION_NOT_SET (-2812)
780	/** The media is not mounted, operation requires a mounted media. */
781	#define VERR_PDM_MEDIA_NOT_MOUNTED (-2813)
782	/** Mount failed because a media was already mounted. Unmount the media
783	* and retry the mount. */
784	#define VERR_PDM_MEDIA_MOUNTED (-2814)
785	/** The media is locked and cannot be unmounted. */
786	#define VERR_PDM_MEDIA_LOCKED (-2815)
787	/** No 'Type' attribute in the DrvBlock configuration.
788	* Misconfiguration. */
789	#define VERR_PDM_BLOCK_NO_TYPE (-2816)
790	/** The 'Type' attribute in the DrvBlock configuration had an unknown value.
791	* Misconfiguration. */
792	#define VERR_PDM_BLOCK_UNKNOWN_TYPE (-2817)
793	/** The 'Translation' attribute in the DrvBlock configuration had an unknown value.
794	* Misconfiguration. */
795	#define VERR_PDM_BLOCK_UNKNOWN_TRANSLATION (-2818)
796	/** The block driver type wasn't supported.
797	* Misconfiguration of the kind you get when attaching a floppy to an IDE controller. */
798	#define VERR_PDM_UNSUPPORTED_BLOCK_TYPE (-2819)
799	/** A attach or prepare mount call failed because the driver already
800	* had a driver attached. */
801	#define VERR_PDM_DRIVER_ALREADY_ATTACHED (-2820)
802	/** An attempt on deattaching a driver without anyone actually being attached, or
803	* performing any other operation on an attached driver. */
804	#define VERR_PDM_NO_DRIVER_ATTACHED (-2821)
805	/** The attached driver configuration is missing the 'Driver' attribute. */
806	#define VERR_PDM_CFG_MISSING_DRIVER_NAME (-2822)
807	/** The configured driver wasn't found.
808	* Either the necessary driver modules wasn't loaded, the name was
809	* misspelled, or it was a misconfiguration. */
810	#define VERR_PDM_DRIVER_NOT_FOUND (-2823)
811	/** The Ring-3 module was already loaded. */
812	#define VINF_PDM_ALREADY_LOADED (2824)
813	/** The name of the module clashed with an existing module. */
814	#define VERR_PDM_MODULE_NAME_CLASH (-2825)
815	/** Couldn't find any export for registration of drivers/devices. */
816	#define VERR_PDM_NO_REGISTRATION_EXPORT (-2826)
817	/** A module name is too long. */
818	#define VERR_PDM_MODULE_NAME_TOO_LONG (-2827)
819	/** Driver name clash. Another driver with the same name as the
820	* one begin registred exists. */
821	#define VERR_PDM_DRIVER_NAME_CLASH (-2828)
822	/** The version of the driver registration structure is unknown
823	* to this VBox version. Either mixing incompatible versions or
824	* the structure isn't correctly initialized. */
825	#define VERR_PDM_UNKNOWN_DRVREG_VERSION (-2829)
826	/** Invalid entry in the driver registration structure. */
827	#define VERR_PDM_INVALID_DRIVER_REGISTRATION (-2830)
828	/** Invalid host bit mask. */
829	#define VERR_PDM_INVALID_DRIVER_HOST_BITS (-2831)
830	/** Not possible to detach a driver because the above driver/device
831	* doesn't support it. The above entity doesn't implement the pfnDetach call. */
832	#define VERR_PDM_DRIVER_DETACH_NOT_POSSIBLE (-2832)
833	/** No PCI Bus is available to register the device with. This is usually a
834	* misconfiguration or in rare cases a buggy pci device. */
835	#define VERR_PDM_NO_PCI_BUS (-2833)
836	/** The device is not a registered PCI device and thus cannot
837	* perform any PCI operations. The device forgot to register it self. */
838	#define VERR_PDM_NOT_PCI_DEVICE (-2834)
839
840	/** The version of the device registration structure is unknown
841	* to this VBox version. Either mixing incompatible versions or
842	* the structure isn't correctly initialized. */
843	#define VERR_PDM_UNKNOWN_DEVREG_VERSION (-2835)
844	/** Invalid entry in the device registration structure. */
845	#define VERR_PDM_INVALID_DEVICE_REGISTRATION (-2836)
846	/** Invalid host bit mask. */
847	#define VERR_PDM_INVALID_DEVICE_GUEST_BITS (-2837)
848	/** The guest bit mask didn't match the guest being loaded. */
849	#define VERR_PDM_INVALID_DEVICE_HOST_BITS (-2838)
850	/** Device name clash. Another device with the same name as the
851	* one begin registred exists. */
852	#define VERR_PDM_DEVICE_NAME_CLASH (-2839)
853	/** The device wasn't found. There was no registered device
854	* by that name. */
855	#define VERR_PDM_DEVICE_NOT_FOUND (-2840)
856	/** The device instance was not found. */
857	#define VERR_PDM_DEVICE_INSTANCE_NOT_FOUND (-2841)
858	/** The device instance have no base interface. */
859	#define VERR_PDM_DEVICE_INSTANCE_NO_IBASE (-2842)
860	/** The device instance have no such logical unit. */
861	#define VERR_PDM_DEVICE_INSTANCE_LUN_NOT_FOUND (-2843)
862	/** The driver instance could not be found. */
863	#define VERR_PDM_DRIVER_INSTANCE_NOT_FOUND (-2844)
864	/** Logical Unit was not found. */
865	#define VERR_PDM_LUN_NOT_FOUND (-2845)
866	/** The Logical Unit was found, but it had no driver attached to it. */
867	#define VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN (-2846)
868	/** The Logical Unit was found, but it had no driver attached to it. */
869	#define VINF_PDM_NO_DRIVER_ATTACHED_TO_LUN 2846
870	/** No PIC device instance is registered with the current VM and thus
871	* the PIC operation cannot be performed. */
872	#define VERR_PDM_NO_PIC_INSTANCE (-2847)
873	/** No APIC device instance is registered with the current VM and thus
874	* the APIC operation cannot be performed. */
875	#define VERR_PDM_NO_APIC_INSTANCE (-2848)
876	/** No DMAC device instance is registered with the current VM and thus
877	* the DMA operation cannot be performed. */
878	#define VERR_PDM_NO_DMAC_INSTANCE (-2849)
879	/** No RTC device instance is registered with the current VM and thus
880	* the RTC or CMOS operation cannot be performed. */
881	#define VERR_PDM_NO_RTC_INSTANCE (-2850)
882	/** Unable to open the host interface due to a sharing violation . */
883	#define VERR_PDM_HIF_SHARING_VIOLATION (-2851)
884	/** Unable to open the host interface. */
885	#define VERR_PDM_HIF_OPEN_FAILED (-2852)
886	/** The device doesn't support runtime driver attaching.
887	* The PDMDEVREG::pfnAttach callback function is NULL. */
888	#define VERR_PDM_DEVICE_NO_RT_ATTACH (-2853)
889	/** The device doesn't support runtime driver detaching.
890	* The PDMDEVREG::pfnDetach callback function is NULL. */
891	#define VERR_PDM_DEVICE_NO_RT_DETACH (-2854)
892	/** Invalid host interface version. */
893	#define VERR_PDM_HIF_INVALID_VERSION (-2855)
894
895	/** The version of the USB device registration structure is unknown
896	* to this VBox version. Either mixing incompatible versions or
897	* the structure isn't correctly initialized. */
898	#define VERR_PDM_UNKNOWN_USBREG_VERSION (-2856)
899	/** Invalid entry in the device registration structure. */
900	#define VERR_PDM_INVALID_USB_REGISTRATION (-2857)
901	/** Driver name clash. Another driver with the same name as the
902	* one begin registred exists. */
903	#define VERR_PDM_USB_NAME_CLASH (-2858)
904	/** The USB hub is already registered. */
905	#define VERR_PDM_USB_HUB_EXISTS (-2859)
906	/** Couldn't find any USB hubs to attach the device to. */
907	#define VERR_PDM_NO_USB_HUBS (-2860)
908	/** Couldn't find any free USB ports to attach the device to. */
909	#define VERR_PDM_NO_USB_PORTS (-2861)
910	/** Couldn't find the USB Proxy device. Using OSE? */
911	#define VERR_PDM_NO_USBPROXY (-2862)
912
913	/** @} */
914
915
916	/** @name Host-Guest Communication Manager (HGCM) Status Codes
917	* @{
918	*/
919	/** Requested service does not exist. */
920	#define VERR_HGCM_SERVICE_NOT_FOUND (-2900)
921	/** Service rejected client connection */
922	#define VINF_HGCM_CLIENT_REJECTED 2901
923	/** Command address is invalid. */
924	#define VERR_HGCM_INVALID_CMD_ADDRESS (-2902)
925	/** Service will execute the command in background. */
926	#define VINF_HGCM_ASYNC_EXECUTE 2903
927	/** HGCM could not perform requested operation because of an internal error. */
928	#define VERR_HGCM_INTERNAL (-2904)
929	/** Invalid HGCM client id. */
930	#define VERR_HGCM_INVALID_CLIENT_ID (-2905)
931	/** The HGCM is saving state. */
932	#define VINF_HGCM_SAVE_STATE (2906)
933	/** Requested service already exists. */
934	#define VERR_HGCM_SERVICE_EXISTS (-2907)
935
936	/** @} */
937
938
939	/** @name Network Address Translation Driver (DrvNAT) Status Codes
940	* @{
941	*/
942	/** Failed to find the DNS configured for this machine. */
943	#define VINF_NAT_DNS 3000
944	/** Failed to convert the specified Guest IP to a binary IP address.
945	* Malformed input. */
946	#define VERR_NAT_REDIR_GUEST_IP (-3001)
947	/** Failed while setting up a redirector rule.
948	* There probably is a conflict between the rule and some existing
949	* service on the computer. */
950	#define VERR_NAT_REDIR_SETUP (-3002)
951	/** @} */
952
953
954	/** @name HostIF Driver (DrvTUN) Status Codes
955	* @{
956	*/
957	/** The Host Interface Networking init program failed. */
958	#define VERR_HOSTIF_INIT_FAILED (-3100)
959	/** The Host Interface Networking device name is too long. */
960	#define VERR_HOSTIF_DEVICE_NAME_TOO_LONG (-3101)
961	/** The Host Interface Networking name config IOCTL call failed. */
962	#define VERR_HOSTIF_IOCTL (-3102)
963	/** Failed to make the Host Interface Networking handle non-blocking. */
964	#define VERR_HOSTIF_BLOCKING (-3103)
965	/** If a Host Interface Networking filehandle was specified it's not allowed to
966	* have any init or term programs. */
967	#define VERR_HOSTIF_FD_AND_INIT_TERM (-3104)
968	/** The Host Interface Networking terminate program failed. */
969	#define VERR_HOSTIF_TERM_FAILED (-3105)
970	/** @} */
971
972
973	/** @name VBox HDD Container (VDI) Status Codes
974	* @{
975	*/
976	/** Invalid image file header. */
977	#define VERR_VDI_INVALID_HEADER (-3200)
978	/** Invalid image file header: invalid signature. */
979	#define VERR_VDI_INVALID_SIGNATURE (-3201)
980	/** Invalid image file header: invalid version. */
981	#define VERR_VDI_UNSUPPORTED_VERSION (-3202)
982	/** Invalid image type. */
983	#define VERR_VDI_INVALID_TYPE (-3203)
984	/** Invalid image flags. */
985	#define VERR_VDI_INVALID_FLAGS (-3204)
986	/** Operation can't be done in current HDD container state. */
987	#define VERR_VDI_INVALID_STATE (-3205)
988	/** Differencing image can't be used with current base image. */
989	#define VERR_VDI_WRONG_DIFF_IMAGE (-3206)
990	/** Two or more images of one HDD has different versions. */
991	#define VERR_VDI_IMAGES_VERSION_MISMATCH (-3207)
992	/** Differencing and parent images can't be used together due to UUID. */
993	#define VERR_VDI_IMAGES_UUID_MISMATCH (-3208)
994	/** No differencing images to commit. */
995	#define VERR_VDI_NO_DIFF_IMAGES (-3209)
996	/** Virtual HDD is not opened. */
997	#define VERR_VDI_NOT_OPENED (-3210)
998	/** Requested image is not opened. */
999	#define VERR_VDI_IMAGE_NOT_FOUND (-3211)
1000	/** Image is read-only. */
1001	#define VERR_VDI_IMAGE_READ_ONLY (-3212)
1002	/** Comment string is too long. */
1003	#define VERR_VDI_COMMENT_TOO_LONG (-3213)
1004	/** Geometry hasn't been set. */
1005	#define VERR_VDI_GEOMETRY_NOT_SET (-3214)
1006	/** No data for this block in image. */
1007	#define VINF_VDI_BLOCK_FREE 3215
1008	/** Configuration value not found. */
1009	#define VERR_VDI_VALUE_NOT_FOUND (-3216)
1010	/** @} */
1011
1012
1013	/** @name VBox Guest Library (VBGL) Status Codes
1014	* @{
1015	*/
1016	/** Library was not initialized. */
1017	#define VERR_VBGL_NOT_INITIALIZED (-3300)
1018	/** Virtual address was not allocated by the library. */
1019	#define VERR_VBGL_INVALID_ADDR (-3301)
1020	/** IOCtl to VBoxGuest driver failed. */
1021	#define VERR_VBGL_IOCTL_FAILED (-3302)
1022	/** @} */
1023
1024
1025	/** @name VBox USB (VUSB) Status Codes
1026	* @{
1027	*/
1028	/** No available ports on the hub.
1029	* This error is returned when a device is attempted created and/or attached
1030	* to a hub which is out of ports. */
1031	#define VERR_VUSB_NO_PORTS (-3400)
1032	/** The requested operation cannot be performed on a detached USB device. */
1033	#define VERR_VUSB_DEVICE_NOT_ATTACHED (-3401)
1034	/** Failed to allocate memory for a URB. */
1035	#define VERR_VUSB_NO_URB_MEMORY (-3402)
1036	/** General failure during URB queuing.
1037	* This will go away when the queueing gets proper status code handling. */
1038	#define VERR_VUSB_FAILED_TO_QUEUE_URB (-3403)
1039	/** Device creation failed because the USB device name was not found. */
1040	#define VERR_VUSB_DEVICE_NAME_NOT_FOUND (-3404)
1041	/** Not permitted to open the USB device.
1042	* The user doesn't have access to the device in the usbfs, check the mount options. */
1043	#define VERR_VUSB_USBFS_PERMISSION (-3405)
1044	/** The requested operation cannot be performed because the device
1045	* is currently being reset. */
1046	#define VERR_VUSB_DEVICE_IS_RESETTING (-3406)
1047	/** @} */
1048
1049
1050	/** @name VBox VGA Status Codes
1051	* @{
1052	*/
1053	/** One of the custom modes was incorrect.
1054	* The format or bit count of the custom mode value is invalid. */
1055	#define VERR_VGA_INVALID_CUSTOM_MODE (-3500)
1056	/** The display connector is resizing. */
1057	#define VINF_VGA_RESIZE_IN_PROGRESS (3501)
1058	/** @} */
1059
1060
1061	/** @name VBox VMX Status Codes
1062	* @{
1063	*/
1064	/** Invalid VMCS index or write to read-only element. */
1065	#define VERR_VMX_INVALID_VMCS_FIELD (-4000)
1066	/** Invalid VMCS pointer. */
1067	#define VERR_VMX_INVALID_VMCS_PTR (-4001)
1068	/** Invalid VMXON pointer. */
1069	#define VERR_VMX_INVALID_VMXON_PTR (-4002)
1070	/** Generic VMX failure. */
1071	#define VERR_VMX_GENERIC (-4003)
1072	/** Invalid CPU mode for VMX execution. */
1073	#define VERR_VMX_UNSUPPORTED_MODE (-4004)
1074	/** Unable to start VM execution. */
1075	#define VERR_VMX_UNABLE_TO_START_VM (-4005)
1076	/** Unable to resume VM execution. */
1077	#define VERR_VMX_UNABLE_TO_RESUME_VM (-4006)
1078	/** Unable to switch due to invalid host state. */
1079	#define VERR_VMX_INVALID_HOST_STATE (-4007)
1080	/** IA32_FEATURE_CONTROL MSR not setup correcty (turn on VMX in the host system BIOS) */
1081	#define VERR_VMX_ILLEGAL_FEATURE_CONTROL_MSR (-4008)
1082	/** VMX CPU extension not available */
1083	#define VERR_VMX_NO_VMX (-4009)
1084	/** VMXON failed; possibly because it was already run before */
1085	#define VERR_VMX_VMXON_FAILED (-4010)
1086	/** CPU was incorrectly left in VMX root mode; incompatible with VirtualBox */
1087	#define VERR_VMX_IN_VMX_ROOT_MODE (-4011)
1088	/** @} */
1089
1090	/** @name VBox SVM Status Codes
1091	* @{
1092	*/
1093	/** Unable to start VM execution. */
1094	#define VERR_SVM_UNABLE_TO_START_VM (-4050)
1095	/** SVM bit not set in K6_EFER MSR */
1096	#define VERR_SVM_ILLEGAL_EFER_MSR (-4051)
1097	/** SVM CPU extension not available. */
1098	#define VERR_SVM_NO_SVM (-4052)
1099	/** SVM CPU extension disabled (by BIOS). */
1100	#define VERR_SVM_DISABLED (-4053)
1101	/** @} */
1102
1103	/** @name VBox HWACCM Status Codes
1104	* @{
1105	*/
1106	/** Unable to start VM execution. */
1107	#define VERR_HWACCM_UNKNOWN_CPU (-4100)
1108	/** No CPUID support. */
1109	#define VERR_HWACCM_NO_CPUID (-4101)
1110	/** @} */
1111
1112	/** @name VBox GMM Status Codes
1113	* @{
1114	*/
1115	/** The GMM is out of pages and needs to be give another chunk of user memory that
1116	* it can lock down and borrow pages from. */
1117	#define VERR_GMM_SEED_ME (-4150)
1118	/** Unable to allocate more pages from the host system. */
1119	#define VERR_GMM_OUT_OF_MEMORY (-4151)
1120	/** Hit the global allocation limit.
1121	* If you know there is still sufficient memory available, try raise the limit. */
1122	#define VERR_GMM_HIT_GLOBAL_LIMIT (-4152)
1123	/** Hit the a VM account limit. */
1124	#define VERR_GMM_HIT_VM_ACCOUNT_LIMIT (-4153)
1125	/** Attempt to free more memory than what was previously allocated. */
1126	#define VERR_GMM_ATTEMPT_TO_FREE_TOO_MUCH (-4154)
1127	/** Attempted to report too many pages as deflated. */
1128	#define VERR_GMM_ATTEMPT_TO_DEFLATE_TOO_MUCH (-4155)
1129	/** The page to be freed or updated was not found. */
1130	#define VERR_GMM_PAGE_NOT_FOUND (-4156)
1131	/** The specified shared page was not actually private. */
1132	#define VERR_GMM_PAGE_NOT_PRIVATE (-4157)
1133	/** The specified shared page was not actually shared. */
1134	#define VERR_GMM_PAGE_NOT_SHARED (-4158)
1135	/** The page to be freed was already freed. */
1136	#define VERR_GMM_PAGE_ALREADY_FREE (-4159)
1137	/** The page to be updated or freed was noted owned by the caller. */
1138	#define VERR_GMM_NOT_PAGE_OWNER (-4160)
1139	/** The specified chunk was not found. */
1140	#define VERR_GMM_CHUNK_NOT_FOUND (-4161)
1141	/** The chunk has already been mapped into the process. */
1142	#define VERR_GMM_CHUNK_ALREADY_MAPPED (-4162)
1143	/** The chunk to be unmapped isn't actually mapped into the process. */
1144	#define VERR_GMM_CHUNK_NOT_MAPPED (-4163)
1145	/** The reservation or reservation update was declined - too many VMs, too
1146	* little memory, and/or too low GMM configuration. */
1147	#define VERR_GMM_MEMORY_RESERVATION_DECLINED (-4161)
1148	/** @} */
1149
1150	/** @name VBox GVM Status Codes
1151	* @{
1152	*/
1153	/** The GVM is out of VM handle space. */
1154	#define VERR_GVM_TOO_MANY_VMS (-4200)
1155	/** @} */
1156
1157	/** @name VBox Disassembler Status Codes
1158	* @{
1159	*/
1160	/** Invalid opcode byte(s) */
1161	#define VERR_DIS_INVALID_OPCODE (-5000)
1162	/** Generic failure during disassembly. */
1163	#define VERR_DIS_GEN_FAILURE (-5001)
1164	/** @} */
1165
1166	/* SED-END */
1167
1168
1169	/** @def VBOX_SUCCESS
1170	* Check for success.
1171	*
1172	* @returns true if rc indicates success.
1173	* @returns false if rc indicates failure.
1174	*
1175	* @param rc The iprt status code to test.
1176	*/
1177	#define VBOX_SUCCESS(rc) RT_SUCCESS(rc)
1178
1179	/** @def VBOX_FAILURE
1180	* Check for failure.
1181	*
1182	* @returns true if rc indicates failure.
1183	* @returns false if rc indicates success.
1184	*
1185	* @param rc The iprt status code to test.
1186	*/
1187	#define VBOX_FAILURE(rc) RT_FAILURE(rc)
1188
1189	/** @} */
1190
1191
1192	#endif
1193

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/err.h@ 5142

Download in other formats: