VirtualBox

source: vbox/trunk/include/VBox/pci.h@ 9153

Last change on this file since 9153 was 8155, checked in by vboxsync, 17 years ago

The Big Sun Rebranding Header Change

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 11.0 KB
Line 
1/** @file
2 * PCI - The PCI Controller And Devices.
3 */
4
5/*
6 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
7 *
8 * This file is part of VirtualBox Open Source Edition (OSE), as
9 * available from http://www.virtualbox.org. This file is free software;
10 * you can redistribute it and/or modify it under the terms of the GNU
11 * General Public License (GPL) as published by the Free Software
12 * Foundation, in version 2 as it comes in the "COPYING" file of the
13 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15 *
16 * The contents of this file may alternatively be used under the terms
17 * of the Common Development and Distribution License Version 1.0
18 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19 * VirtualBox OSE distribution, in which case the provisions of the
20 * CDDL are applicable instead of those of the GPL.
21 *
22 * You may elect to license modified versions of this file under the
23 * terms and conditions of either the GPL or the CDDL or both.
24 *
25 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
26 * Clara, CA 95054 USA or visit http://www.sun.com if you need
27 * additional information or have any questions.
28 */
29
30#ifndef ___VBox_pci_h
31#define ___VBox_pci_h
32
33#include <VBox/cdefs.h>
34#include <VBox/types.h>
35
36/** @defgroup grp_pci PCI - The PCI Controller.
37 * @{
38 */
39
40/** Pointer to a PCI device. */
41typedef struct PCIDevice *PPCIDEVICE;
42
43
44/**
45 * PCI configuration word 4 (command) and word 6 (status).
46 */
47typedef enum PCICONFIGCOMMAND
48{
49 /** Supports/uses memory accesses. */
50 PCI_COMMAND_IOACCESS = 0x0001,
51 PCI_COMMAND_MEMACCESS = 0x0002,
52 PCI_COMMAND_BUSMASTER = 0x0004
53} PCICONFIGCOMMAND;
54
55
56/**
57 * PCI Address space specification.
58 * This is used when registering a I/O region.
59 */
60/** Note: There are all sorts of dirty dependencies on the values in the
61 * pci device. Be careful when changing this.
62 * @todo we should introduce 32 & 64 bits physical address types
63 */
64typedef enum PCIADDRESSSPACE
65{
66 /** Memory. */
67 PCI_ADDRESS_SPACE_MEM = 0x00,
68 /** I/O space. */
69 PCI_ADDRESS_SPACE_IO = 0x01,
70 /** Prefetch memory. */
71 PCI_ADDRESS_SPACE_MEM_PREFETCH = 0x08
72} PCIADDRESSSPACE;
73
74
75/**
76 * Callback function for mapping an PCI I/O region.
77 *
78 * @return VBox status code.
79 * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance.
80 * @param iRegion The region number.
81 * @param GCPhysAddress Physical address of the region. If enmType is PCI_ADDRESS_SPACE_IO, this
82 * is an I/O port, otherwise it's a physical address.
83 *
84 * NIL_RTGCPHYS indicates that a MMIO2 mapping is about to be unmapped and
85 * that the device deregister access handlers for it and update its internal
86 * state to reflect this.
87 *
88 * @param enmType One of the PCI_ADDRESS_SPACE_* values.
89 *
90 * @remarks The address is *NOT* relative to pci_mem_base.
91 */
92typedef DECLCALLBACK(int) FNPCIIOREGIONMAP(PPCIDEVICE pPciDev, /*unsigned*/ int iRegion, RTGCPHYS GCPhysAddress, uint32_t cb, PCIADDRESSSPACE enmType);
93/** Pointer to a FNPCIIOREGIONMAP() function. */
94typedef FNPCIIOREGIONMAP *PFNPCIIOREGIONMAP;
95
96
97/** @name PCI Configuration Space Registers
98 * @{ */
99#define VBOX_PCI_VENDOR_ID 0x00 /**< 16-bit RO */
100#define VBOX_PCI_DEVICE_ID 0x02 /**< 16-bit RO */
101#define VBOX_PCI_COMMAND 0x04 /**< 16-bit RW */
102#define VBOX_PCI_STATUS 0x06 /**< 16-bit RW */
103#define VBOX_PCI_REVISION_ID 0x08 /**< 8-bit RO */
104#define VBOX_PCI_CLASS_PROG 0x09 /**< 8-bit RO */
105#define VBOX_PCI_CLASS_DEVICE 0x0a /**< 8-bit ?? */
106#define VBOX_PCI_CACHE_LINE_SIZE 0x0c /**< 8-bit ?? */
107#define VBOX_PCI_LATENCY_TIMER 0x0d /**< 8-bit ?? */
108#define VBOX_PCI_HEADER_TYPE 0x0e /**< 8-bit ?? */
109#define VBOX_PCI_BIST 0x0f /**< 8-bit ?? */
110#define VBOX_PCI_BASE_ADDRESS_0 0x10 /**< 32-bit RW */
111#define VBOX_PCI_BASE_ADDRESS_1 0x14 /**< 32-bit RW */
112#define VBOX_PCI_BASE_ADDRESS_2 0x18 /**< 32-bit RW */
113#define VBOX_PCI_PRIMARY_BUS 0x18 /**< 8-bit ?? - bridge - primary bus number. */
114#define VBOX_PCI_SECONDARY_BUS 0x19 /**< 8-bit ?? - bridge - secondary bus number. */
115#define VBOX_PCI_SUBORDINATE_BUS 0x1a /**< 8-bit ?? - bridge - highest subordinate bus number. (behind the bridge) */
116#define VBOX_PCI_SEC_LATENCY_TIMER 0x1b /**< 8-bit ?? - bridge - secondary latency timer. */
117#define VBOX_PCI_BASE_ADDRESS_3 0x1c /**< 32-bit RW */
118#define VBOX_PCI_IO_BASE 0x1c /**< 8-bit ?? - bridge - I/O range base. */
119#define VBOX_PCI_IO_LIMIT 0x1d /**< 8-bit ?? - bridge - I/O range limit. */
120#define VBOX_PCI_SEC_STATUS 0x1e /**< 16-bit ?? - bridge - secondary status register. */
121#define VBOX_PCI_BASE_ADDRESS_4 0x20 /**< 32-bit RW */
122#define VBOX_PCI_MEMORY_BASE 0x20 /**< 16-bit ?? - bridge - memory range base. */
123#define VBOX_PCI_MEMORY_LIMIT 0x22 /**< 16-bit ?? - bridge - memory range limit. */
124#define VBOX_PCI_BASE_ADDRESS_5 0x24 /**< 32-bit RW */
125#define VBOX_PCI_PREF_MEMORY_BASE 0x24 /**< 16-bit ?? - bridge - Prefetchable memory range base. */
126#define VBOX_PCI_PREF_MEMORY_LIMIT 0x26 /**< 16-bit ?? - bridge - Prefetchable memory range limit. */
127#define VBOX_PCI_CARDBUS_CIS 0x28 /**< 32-bit ?? */
128#define VBOX_PCI_PREF_BASE_UPPER32 0x28 /**< 32-bit ?? - bridge - Prefetchable memory range high base.*/
129#define VBOX_PCI_PREF_LIMIT_UPPER32 0x2c /**< 32-bit ?? - bridge - Prefetchable memory range high limit. */
130#define VBOX_PCI_SUBSYSTEM_VENDOR_ID 0x2c /**< 16-bit ?? */
131#define VBOX_PCI_SUBSYSTEM_ID 0x2e /**< 16-bit ?? */
132#define VBOX_PCI_ROM_ADDRESS 0x30 /**< 32-bit ?? */
133#define VBOX_PCI_IO_BASE_UPPER16 0x30 /**< 16-bit ?? - bridge - memory range high base. */
134#define VBOX_PCI_IO_LIMIT_UPPER16 0x32 /**< 16-bit ?? - bridge - memory range high limit. */
135#define VBOX_PCI_CAPABILITY_LIST 0x34 /**< 8-bit? ?? */
136#define VBOX_PCI_ROM_ADDRESS_BR 0x38 /**< 32-bit ?? - bridge */
137#define VBOX_PCI_INTERRUPT_LINE 0x3c /**< 8-bit RW - Interrupt line. */
138#define VBOX_PCI_INTERRUPT_PIN 0x3d /**< 8-bit RO - Interrupt pin. */
139#define VBOX_PCI_MIN_GNT 0x3e /**< 8-bit ?? */
140#define VBOX_PCI_BRIDGE_CONTROL 0x3e /**< 8-bit? ?? - bridge */
141#define VBOX_PCI_MAX_LAT 0x3f /**< 8-bit ?? */
142/** @} */
143
144
145/**
146 * Callback function for reading from the PCI configuration space.
147 *
148 * @returns The register value.
149 * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance.
150 * @param Address The configuration space register address. [0..255]
151 * @param cb The register size. [1,2,4]
152 */
153typedef DECLCALLBACK(uint32_t) FNPCICONFIGREAD(PPCIDEVICE pPciDev, uint32_t Address, unsigned cb);
154/** Pointer to a FNPCICONFIGREAD() function. */
155typedef FNPCICONFIGREAD *PFNPCICONFIGREAD;
156/** Pointer to a PFNPCICONFIGREAD. */
157typedef PFNPCICONFIGREAD *PPFNPCICONFIGREAD;
158
159/**
160 * Callback function for writing to the PCI configuration space.
161 *
162 * @param pPciDev Pointer to PCI device. Use pPciDev->pDevIns to get the device instance.
163 * @param Address The configuration space register address. [0..255]
164 * @param u32Value The value that's being written. The number of bits actually used from
165 * this value is determined by the cb parameter.
166 * @param cb The register size. [1,2,4]
167 */
168typedef DECLCALLBACK(void) FNPCICONFIGWRITE(PPCIDEVICE pPciDev, uint32_t Address, uint32_t u32Value, unsigned cb);
169/** Pointer to a FNPCICONFIGWRITE() function. */
170typedef FNPCICONFIGWRITE *PFNPCICONFIGWRITE;
171/** Pointer to a PFNPCICONFIGWRITE. */
172typedef PFNPCICONFIGWRITE *PPFNPCICONFIGWRITE;
173
174/** Fixed I/O region number for ROM. */
175#define PCI_ROM_SLOT 6
176/** Max number of I/O regions. */
177#define PCI_NUM_REGIONS 7
178
179/*
180 * Hack to include the PCIDEVICEINT structure at the right place
181 * to avoid duplications of FNPCIIOREGIONMAP and PCI_NUM_REGIONS.
182 */
183#ifdef PCI_INCLUDE_PRIVATE
184# include "PCIInternal.h"
185#endif
186
187/**
188 * PCI Device structure.
189 */
190typedef struct PCIDevice
191{
192 /** PCI config space. */
193 uint8_t config[256];
194
195 /** Internal data. */
196 union
197 {
198#ifdef __PCIDEVICEINT_DECLARED__
199 PCIDEVICEINT s;
200#endif
201 char padding[224];
202 } Int;
203
204 /** Read only data.
205 * @{
206 */
207 /** PCI device number on the pci bus. */
208 int32_t devfn;
209 uint32_t Alignment0; /**< Alignment. */
210 /** Device name. */
211 R3PTRTYPE(const char *) name;
212 /** Pointer to the device instance which registered the device. */
213 PPDMDEVINSR3 pDevIns;
214 /** @} */
215} PCIDEVICE;
216
217
218/**
219 * Sets the vendor id config register.
220 * @param pPciDev The PCI device.
221 * @param u16VendorId The vendor id.
222 */
223DECLINLINE(void) PCIDevSetVendorId(PPCIDEVICE pPciDev, uint16_t u16VendorId)
224{
225 u16VendorId = RT_H2LE_U16(u16VendorId);
226 pPciDev->config[VBOX_PCI_VENDOR_ID] = u16VendorId & 0xff;
227 pPciDev->config[VBOX_PCI_VENDOR_ID + 1] = u16VendorId >> 8;
228}
229
230/**
231 * Gets the vendor id config register.
232 * @returns the vendor id.
233 * @param pPciDev The PCI device.
234 */
235DECLINLINE(uint16_t) PCIDevGetVendorId(PPCIDEVICE pPciDev)
236{
237 return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_VENDOR_ID], pPciDev->config[VBOX_PCI_VENDOR_ID + 1]));
238}
239
240/**
241 * Sets the device id config register.
242 * @param pPciDev The PCI device.
243 * @param u16DeviceId The device id.
244 */
245DECLINLINE(void) PCIDevSetDeviceId(PPCIDEVICE pPciDev, uint16_t u16DeviceId)
246{
247 u16DeviceId = RT_H2LE_U16(u16DeviceId);
248 pPciDev->config[VBOX_PCI_DEVICE_ID] = u16DeviceId & 0xff;
249 pPciDev->config[VBOX_PCI_DEVICE_ID + 1] = u16DeviceId >> 8;
250}
251
252/**
253 * Gets the device id config register.
254 * @returns the device id.
255 * @param pPciDev The PCI device.
256 */
257DECLINLINE(uint16_t) PCIDevGetDeviceId(PPCIDEVICE pPciDev)
258{
259 return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_DEVICE_ID], pPciDev->config[VBOX_PCI_DEVICE_ID + 1]));
260}
261
262/**
263 * Gets the sub-system vendor id config register.
264 * @returns the sub-system vendor id.
265 * @param pPciDev The PCI device.
266 */
267DECLINLINE(uint16_t) PCIDevGetSubSystemVendorId(PPCIDEVICE pPciDev)
268{
269 return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_SUBSYSTEM_VENDOR_ID], pPciDev->config[VBOX_PCI_SUBSYSTEM_VENDOR_ID + 1]));
270}
271
272/**
273 * Gets the sub-system id config register.
274 * @returns the sub-system id.
275 * @param pPciDev The PCI device.
276 */
277DECLINLINE(uint16_t) PCIDevGetSubSystemId(PPCIDEVICE pPciDev)
278{
279 return RT_LE2H_U16(RT_MAKE_U16(pPciDev->config[VBOX_PCI_SUBSYSTEM_ID], pPciDev->config[VBOX_PCI_SUBSYSTEM_ID + 1]));
280}
281
282
283/** @} */
284
285#endif
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette