scsi.h@ 3633

Last change on this file since 3633 was 3633, checked in by vboxsync, 17 years ago
VBox_hdr_h -> _VBox_hdr_h
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 18.6 KB

Line
1	/** @file
2	* VirtualBox - SCSI declarations.
3	*/
4
5	/*
6	* Copyright (C) 2006-2007 innotek GmbH
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License as published by the Free Software Foundation,
12	* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
13	* distribution. VirtualBox OSE is distributed in the hope that it will
14	* be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* If you received this file as part of a commercial VirtualBox
17	* distribution, then only the terms of your commercial VirtualBox
18	* license agreement apply instead of the previous paragraph.
19	*/
20
21	#ifndef ___VBox_scsi_h
22	#define ___VBox_scsi_h
23
24
25	/**
26	* SCSI command opcode identifiers.
27	*
28	* SCSI-3, so far for CD/DVD Logical Units, from Table 49 of the MMC-3 draft standard.
29	*/
30	typedef enum SCSICMD
31	{
32	SCSI_BLANK = 0xa1,
33	SCSI_CLOSE_TRACK_SESSION = 0x5b,
34	SCSI_ERASE_10 = 0x2c,
35	SCSI_FORMAT_UNIT = 0x04,
36	SCSI_GET_CONFIGURATION = 0x46,
37	SCSI_GET_EVENT_STATUS_NOTIFICATION = 0x4a,
38	SCSI_GET_PERFORMANCE = 0xac,
39	/** Inquiry command. */
40	SCSI_INQUIRY = 0x12,
41	SCSI_LOAD_UNLOAD_MEDIUM = 0xa6,
42	SCSI_MECHANISM_STATUS = 0xbd,
43	SCSI_MODE_SELECT_10 = 0x55,
44	SCSI_MODE_SENSE_10 = 0x5a,
45	SCSI_PAUSE_RESUME = 0x4b,
46	SCSI_PLAY_AUDIO_10 = 0x45,
47	SCSI_PLAY_AUDIO_12 = 0xa5,
48	SCSI_PLAY_AUDIO_MSF = 0x47,
49	SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1e,
50	/** Read(10) command. */
51	SCSI_READ_10 = 0x28,
52	SCSI_READ_12 = 0xa8,
53	SCSI_READ_BUFFER = 0x3c,
54	SCSI_READ_BUFFER_CAPACITY = 0x5c,
55	/** Read Capacity(6) command. */
56	SCSI_READ_CAPACITY = 0x25,
57	SCSI_READ_CD = 0xbe,
58	SCSI_READ_CD_MSF = 0xb9,
59	SCSI_READ_DISC_INFORMATION = 0x51,
60	SCSI_READ_DVD_STRUCTURE = 0xad,
61	SCSI_READ_FORMAT_CAPACITIES = 0x23,
62	SCSI_READ_SUBCHANNEL = 0x42,
63	SCSI_READ_TOC_PMA_ATIP = 0x43,
64	SCSI_READ_TRACK_INFORMATION = 0x52,
65	SCSI_REPAIR_TRACK = 0x58,
66	SCSI_REPORT_KEY = 0xa4,
67	SCSI_REQUEST_SENSE = 0x03,
68	SCSI_RESERVE_TRACK = 0x53,
69	SCSI_SCAN = 0xba,
70	SCSI_SEEK_10 = 0x2b,
71	SCSI_SEND_CUE_SHEET = 0x5d,
72	SCSI_SEND_DVD_STRUCTURE = 0xbf,
73	SCSI_SEND_EVENT = 0xa2,
74	SCSI_SEND_KEY = 0xa3,
75	SCSI_SEND_OPC_INFORMATION = 0x54,
76	SCSI_SET_CD_SPEED = 0xbb,
77	SCSI_SET_READ_AHEAD = 0xa7,
78	SCSI_SET_STREAMING = 0xb6,
79	SCSI_START_STOP_UNIT = 0x1b,
80	SCSI_STOP_PLAY_SCAN = 0x4e,
81	/** Synchronize Cache command. */
82	SCSI_SYNCHRONIZE_CACHE = 0x35,
83	SCSI_TEST_UNIT_READY = 0x00,
84	SCSI_VERIFY_10 = 0x2f,
85	/** Write(10) command. */
86	SCSI_WRITE_10 = 0x2a,
87	SCSI_WRITE_12 = 0xaa,
88	SCSI_WRITE_AND_VERIFY_10 = 0x2e,
89	SCSI_WRITE_BUFFER = 0x3b,
90
91	/** Mode Sense(6) command */
92	SCSI_MODE_SENSE_6 = 0x1a,
93	/** Report LUNs command. */
94	SCSI_REPORT_LUNS = 0xa0,
95	/** Rezero Unit command. Obsolete for ages now, but used by cdrecord. */
96	SCSI_REZERO_UNIT = 0x01
97	} SCSICMD;
98
99	#ifdef DEBUG
100	static const char * const g_apszSCSICmdNames[256] =
101	{
102	"TEST UNIT READY", /* 0x00 */
103	"REZERO UNIT", /* 0x01 */
104	"", /* 0x02 */
105	"REQUEST SENSE", /* 0x03 */
106	"FORMAT UNIT", /* 0x04 */
107	"READ BLOCK LIMITS", /* 0x05 */
108	"", /* 0x06 */
109	"REASSIGN BLOCKS", /* 0x07 */
110	"READ (6)", /* 0x08 */
111	"", /* 0x09 */
112	"WRITE (6)", /* 0x0a */
113	"SEEK (6)", /* 0x0b */
114	"", /* 0x0c */
115	"", /* 0x0d */
116	"", /* 0x0e */
117	"READ REVERSE (6)", /* 0x0f */
118	"READ FILEMARKS (6)", /* 0x10 */
119	"SPACE (6)", /* 0x11 */
120	"INQUIRY", /* 0x12 */
121	"VERIFY (6)", /* 0x13 */
122	"RECOVER BUFFERED DATA", /* 0x14 */
123	"MODE SELECT (6)", /* 0x15 */
124	"RESERVE (6)", /* 0x16 */
125	"RELEASE (6)", /* 0x17 */
126	"COPY", /* 0x18 */
127	"ERASE (6)", /* 0x19 */
128	"MODE SENSE (6)", /* 0x1a */
129	"START STOP UNIT", /* 0x1b */
130	"RECEIVE DIAGNOSTIC RESULTS", /* 0x1c */
131	"SEND DIAGNOSTIC", /* 0x1d */
132	"PREVENT ALLOW MEDIUM REMOVAL", /* 0x1e */
133	"", /* 0x1f */
134	"", /* 0x20 */
135	"", /* 0x21 */
136	"", /* 0x22 */
137	"READ FORMAT CAPACITIES", /* 0x23 */
138	"SET WINDOW", /* 0x24 */
139	"READ CAPACITY", /* 0x25 */
140	"", /* 0x26 */
141	"", /* 0x27 */
142	"READ (10)", /* 0x28 */
143	"READ GENERATION", /* 0x29 */
144	"WRITE (10)", /* 0x2a */
145	"SEEK (10)", /* 0x2b */
146	"ERASE (10)", /* 0x2c */
147	"READ UPDATED BLOCK", /* 0x2d */
148	"WRITE AND VERIFY (10)", /* 0x2e */
149	"VERIFY (10)", /* 0x2f */
150	"SEARCH DATA HIGH (10)", /* 0x30 */
151	"SEARCH DATA EQUAL (10)", /* 0x31 */
152	"SEARCH DATA LOW (10)", /* 0x32 */
153	"SET LIMITS (10)", /* 0x33 */
154	"PRE-FETCH (10)", /* 0x34 */
155	"SYNCHRONIZE CACHE (10)", /* 0x35 */
156	"LOCK UNLOCK CACHE (10)", /* 0x36 */
157	"READ DEFECT DATA (10)", /* 0x37 */
158	"MEDIUM SCAN", /* 0x38 */
159	"COMPARE", /* 0x39 */
160	"COPY AND VERIFY", /* 0x3a */
161	"WRITE BUFFER", /* 0x3b */
162	"READ BUFFER", /* 0x3c */
163	"UPDATE BLOCK", /* 0x3d */
164	"READ LONG (10)", /* 0x3e */
165	"WRITE LONG (10)", /* 0x3f */
166	"CHANGE DEFINITION", /* 0x40 */
167	"WRITE SAME (10)", /* 0x41 */
168	"READ SUBCHANNEL", /* 0x42 */
169	"READ TOC/PMA/ATIP", /* 0x43 */
170	"REPORT DENSITY SUPPORT", /* 0x44 */
171	"PLAY AUDIO (10)", /* 0x45 */
172	"GET CONFIGURATION", /* 0x46 */
173	"PLAY AUDIO MSF", /* 0x47 */
174	"", /* 0x48 */
175	"", /* 0x49 */
176	"GET EVENT STATUS NOTIFICATION", /* 0x4a */
177	"PAUSE/RESUME", /* 0x4b */
178	"LOG SELECT", /* 0x4c */
179	"LOG SENSE", /* 0x4d */
180	"STOP PLAY/SCAN", /* 0x4e */
181	"", /* 0x4f */
182	"XDWRITE (10)", /* 0x50 */
183	"READ DISC INFORMATION", /* 0x51 */
184	"READ TRACK INFORMATION", /* 0x52 */
185	"RESERVE TRACK", /* 0x53 */
186	"SEND OPC INFORMATION", /* 0x54 */
187	"MODE SELECT (10)", /* 0x55 */
188	"RESERVE (10)", /* 0x56 */
189	"RELEASE (10)", /* 0x57 */
190	"REPAIR TRACK", /* 0x58 */
191	"", /* 0x59 */
192	"MODE SENSE (10)", /* 0x5a */
193	"CLOSE TRACK/SESSION", /* 0x5b */
194	"READ BUFFER CAPACITY", /* 0x5c */
195	"SEND CUE SHEET", /* 0x5d */
196	"PERSISTENT RESERVE IN", /* 0x5e */
197	"PERSISTENT RESERVE OUT", /* 0x5f */
198	"", /* 0x60 */
199	"", /* 0x61 */
200	"", /* 0x62 */
201	"", /* 0x63 */
202	"", /* 0x64 */
203	"", /* 0x65 */
204	"", /* 0x66 */
205	"", /* 0x67 */
206	"", /* 0x68 */
207	"", /* 0x69 */
208	"", /* 0x6a */
209	"", /* 0x6b */
210	"", /* 0x6c */
211	"", /* 0x6d */
212	"", /* 0x6e */
213	"", /* 0x6f */
214	"", /* 0x70 */
215	"", /* 0x71 */
216	"", /* 0x72 */
217	"", /* 0x73 */
218	"", /* 0x74 */
219	"", /* 0x75 */
220	"", /* 0x76 */
221	"", /* 0x77 */
222	"", /* 0x78 */
223	"", /* 0x79 */
224	"", /* 0x7a */
225	"", /* 0x7b */
226	"", /* 0x7c */
227	"", /* 0x7d */
228	"", /* 0x7e */
229	"", /* 0x7f */
230	"WRITE FILEMARKS (16)", /* 0x80 */
231	"READ REVERSE (16)", /* 0x81 */
232	"REGENERATE (16)", /* 0x82 */
233	"EXTENDED COPY", /* 0x83 */
234	"RECEIVE COPY RESULTS", /* 0x84 */
235	"ATA COMMAND PASS THROUGH (16)", /* 0x85 */
236	"ACCESS CONTROL IN", /* 0x86 */
237	"ACCESS CONTROL OUT", /* 0x87 */
238	"READ (16)", /* 0x88 */
239	"", /* 0x89 */
240	"WRITE(16)", /* 0x8a */
241	"", /* 0x8b */
242	"READ ATTRIBUTE", /* 0x8c */
243	"WRITE ATTRIBUTE", /* 0x8d */
244	"WRITE AND VERIFY (16)", /* 0x8e */
245	"VERIFY (16)", /* 0x8f */
246	"PRE-FETCH (16)", /* 0x90 */
247	"SYNCHRONIZE CACHE (16)", /* 0x91 */
248	"LOCK UNLOCK CACHE (16)", /* 0x92 */
249	"WRITE SAME (16)", /* 0x93 */
250	"", /* 0x94 */
251	"", /* 0x95 */
252	"", /* 0x96 */
253	"", /* 0x97 */
254	"", /* 0x98 */
255	"", /* 0x99 */
256	"", /* 0x9a */
257	"", /* 0x9b */
258	"", /* 0x9c */
259	"", /* 0x9d */
260	"SERVICE ACTION IN (16)", /* 0x9e */
261	"SERVICE ACTION OUT (16)", /* 0x9f */
262	"REPORT LUNS", /* 0xa0 */
263	"BLANK", /* 0xa1 */
264	"SEND EVENT", /* 0xa2 */
265	"SEND KEY", /* 0xa3 */
266	"REPORT KEY", /* 0xa4 */
267	"PLAY AUDIO (12)", /* 0xa5 */
268	"LOAD/UNLOAD MEDIUM", /* 0xa6 */
269	"SET READ AHEAD", /* 0xa7 */
270	"READ (12)", /* 0xa8 */
271	"SERVICE ACTION OUT (12)", /* 0xa9 */
272	"WRITE (12)", /* 0xaa */
273	"SERVICE ACTION IN (12)", /* 0xab */
274	"GET PERFORMANCE", /* 0xac */
275	"READ DVD STRUCTURE", /* 0xad */
276	"WRITE AND VERIFY (12)", /* 0xae */
277	"VERIFY (12)", /* 0xaf */
278	"SEARCH DATA HIGH (12)", /* 0xb0 */
279	"SEARCH DATA EQUAL (12)", /* 0xb1 */
280	"SEARCH DATA LOW (12)", /* 0xb2 */
281	"SET LIMITS (12)", /* 0xb3 */
282	"READ ELEMENT STATUS ATTACHED", /* 0xb4 */
283	"REQUEST VOLUME ELEMENT ADDRESS", /* 0xb5 */
284	"SET STREAMING", /* 0xb6 */
285	"READ DEFECT DATA (12)", /* 0xb7 */
286	"READ ELEMENT STATUS", /* 0xb8 */
287	"READ CD MSF", /* 0xb9 */
288	"SCAN", /* 0xba */
289	"SET CD SPEED", /* 0xbb */
290	"SPARE (IN)", /* 0xbc */
291	"MECHANISM STATUS", /* 0xbd */
292	"READ CD", /* 0xbe */
293	"SEND DVD STRUCTURE", /* 0xbf */
294	"", /* 0xc0 */
295	"", /* 0xc1 */
296	"", /* 0xc2 */
297	"", /* 0xc3 */
298	"", /* 0xc4 */
299	"", /* 0xc5 */
300	"", /* 0xc6 */
301	"", /* 0xc7 */
302	"", /* 0xc8 */
303	"", /* 0xc9 */
304	"", /* 0xca */
305	"", /* 0xcb */
306	"", /* 0xcc */
307	"", /* 0xcd */
308	"", /* 0xce */
309	"", /* 0xcf */
310	"", /* 0xd0 */
311	"", /* 0xd1 */
312	"", /* 0xd2 */
313	"", /* 0xd3 */
314	"", /* 0xd4 */
315	"", /* 0xd5 */
316	"", /* 0xd6 */
317	"", /* 0xd7 */
318	"", /* 0xd8 */
319	"", /* 0xd9 */
320	"", /* 0xda */
321	"", /* 0xdb */
322	"", /* 0xdc */
323	"", /* 0xdd */
324	"", /* 0xde */
325	"", /* 0xdf */
326	"", /* 0xe0 */
327	"", /* 0xe1 */
328	"", /* 0xe2 */
329	"", /* 0xe3 */
330	"", /* 0xe4 */
331	"", /* 0xe5 */
332	"", /* 0xe6 */
333	"", /* 0xe7 */
334	"", /* 0xe8 */
335	"", /* 0xe9 */
336	"", /* 0xea */
337	"", /* 0xeb */
338	"", /* 0xec */
339	"", /* 0xed */
340	"", /* 0xee */
341	"", /* 0xef */
342	"", /* 0xf0 */
343	"", /* 0xf1 */
344	"", /* 0xf2 */
345	"", /* 0xf3 */
346	"", /* 0xf4 */
347	"", /* 0xf5 */
348	"", /* 0xf6 */
349	"", /* 0xf7 */
350	"", /* 0xf8 */
351	"", /* 0xf9 */
352	"", /* 0xfa */
353	"", /* 0xfb */
354	"", /* 0xfc */
355	"", /* 0xfd */
356	"", /* 0xfe */
357	"" /* 0xff */
358	};
359	#endif /* DEBUG */
360
361	/* Mode page codes for mode sense/select commands. */
362	#define SCSI_MODEPAGE_ERROR_RECOVERY 0x01
363	#define SCSI_MODEPAGE_WRITE_PARAMETER 0x05
364	#define SCSI_MODEPAGE_CD_STATUS 0x2a
365
366
367	/* Page control codes. */
368	#define SCSI_PAGECONTROL_CURRENT 0x00
369	#define SCSI_PAGECONTROL_CHANGEABLE 0x01
370	#define SCSI_PAGECONTROL_DEFAULT 0x02
371	#define SCSI_PAGECONTROL_SAVED 0x03
372
373
374	#define SCSI_SENSE_NONE 0
375	#define SCSI_SENSE_NOT_READY 2
376	#define SCSI_SENSE_MEDIUM_ERROR 3
377	#define SCSI_SENSE_ILLEGAL_REQUEST 5
378	#define SCSI_SENSE_UNIT_ATTENTION 6
379
380
381	#define SCSI_ASC_NONE 0x00
382	#define SCSI_ASC_READ_ERROR 0x11
383	#define SCSI_ASC_ILLEGAL_OPCODE 0x20
384	#define SCSI_ASC_LOGICAL_BLOCK_OOR 0x21
385	#define SCSI_ASC_INV_FIELD_IN_CMD_PACKET 0x24
386	#define SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
387	#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3a
388	#define SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
389	#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53
390
391
392	#endif

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/scsi.h@ 3633

Download in other formats: