VirtualBox

source: vbox/trunk/include/VBox/vd-image-backend.h@ 87835

Last change on this file since 87835 was 82968, checked in by vboxsync, 5 years ago

Copyright year updates by scm.

  • Property svn:eol-style set to native
  • Property svn:keywords set to Id Revision
File size: 26.8 KB
Line 
1/** @file
2 * VD: Image backend interface.
3 */
4
5/*
6 * Copyright (C) 2006-2020 Oracle Corporation
7 *
8 * This file is part of VirtualBox Open Source Edition (OSE), as
9 * available from http://www.virtualbox.org. This file is free software;
10 * you can redistribute it and/or modify it under the terms of the GNU
11 * General Public License (GPL) as published by the Free Software
12 * Foundation, in version 2 as it comes in the "COPYING" file of the
13 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15 *
16 * The contents of this file may alternatively be used under the terms
17 * of the Common Development and Distribution License Version 1.0
18 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19 * VirtualBox OSE distribution, in which case the provisions of the
20 * CDDL are applicable instead of those of the GPL.
21 *
22 * You may elect to license modified versions of this file under the
23 * terms and conditions of either the GPL or the CDDL or both.
24 */
25
26#ifndef VBOX_INCLUDED_vd_image_backend_h
27#define VBOX_INCLUDED_vd_image_backend_h
28#ifndef RT_WITHOUT_PRAGMA_ONCE
29# pragma once
30#endif
31
32#include <VBox/vd.h>
33#include <VBox/vd-common.h>
34#include <VBox/vd-ifs-internal.h>
35
36
37/** @name VBox HDD backend write flags
38 * @{
39 */
40/** Do not allocate a new block on this write. This is just an advisory
41 * flag. The backend may still decide in some circumstances that it wants
42 * to ignore this flag (which may cause extra dynamic image expansion). */
43#define VD_WRITE_NO_ALLOC RT_BIT(1)
44/** @}*/
45
46/** @name VBox HDD backend discard flags
47 * @{
48 */
49/** Don't discard block but mark the given range as unused
50 * (usually by writing 0's to it).
51 * This doesn't require the range to be aligned on a block boundary but
52 * the image size might not be decreased. */
53#define VD_DISCARD_MARK_UNUSED RT_BIT(0)
54/** @}*/
55
56/** @name VBox HDD backend metadata traverse flags
57 * @{
58 */
59/** Include per block metadata while traversing the metadata.
60 * This might take much longer instead of traversing just global metadata. */
61#define VD_TRAVERSE_METADATA_INCLUDE_PER_BLOCK_METADATA RT_BIT(0)
62/** @}*/
63
64/**
65 * Image format backend interface used by VBox HDD Container implementation.
66 */
67typedef struct VDIMAGEBACKEND
68{
69 /** Structure version. VD_IMGBACKEND_VERSION defines the current version. */
70 uint32_t u32Version;
71 /** The name of the backend (constant string). */
72 const char *pszBackendName;
73 /** The capabilities of the backend. */
74 uint64_t uBackendCaps;
75
76 /**
77 * Pointer to a NULL-terminated array, containing the supported
78 * file extensions. Note that some backends do not work on files, so this
79 * pointer may just contain NULL.
80 */
81 PCVDFILEEXTENSION paFileExtensions;
82
83 /**
84 * Pointer to an array of structs describing each supported config key.
85 * Terminated by a NULL config key. Note that some backends do not support
86 * the configuration interface, so this pointer may just contain NULL.
87 * Mandatory if the backend sets VD_CAP_CONFIG.
88 */
89 PCVDCONFIGINFO paConfigInfo;
90
91 /**
92 * Check whether the file is supported by the backend.
93 *
94 * @returns VBox status code.
95 * @param pszFilename Name of the image file.
96 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
97 * @param pVDIfsImage Pointer to the per-image VD interface list.
98 * @param enmDesiredType The desired image type, VDTYPE_INVALID if anything goes.
99 * @param penmType Returns the supported device type on success.
100 */
101 DECLR3CALLBACKMEMBER(int, pfnProbe, (const char *pszFilename, PVDINTERFACE pVDIfsDisk,
102 PVDINTERFACE pVDIfsImage, VDTYPE enmDesiredType, VDTYPE *penmType));
103
104 /**
105 * Open a disk image.
106 *
107 * @returns VBox status code.
108 * @param pszFilename Name of the image file to open. Guaranteed to be available and
109 * unchanged during the lifetime of this image.
110 * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants.
111 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
112 * @param pVDIfsImage Pointer to the per-image VD interface list.
113 * @param enmType Requested type of the image.
114 * @param ppBackendData Opaque state data for this image.
115 */
116 DECLR3CALLBACKMEMBER(int, pfnOpen, (const char *pszFilename, unsigned uOpenFlags,
117 PVDINTERFACE pVDIfsDisk, PVDINTERFACE pVDIfsImage,
118 VDTYPE enmType, void **ppBackendData));
119
120 /**
121 * Create a disk image.
122 *
123 * @returns VBox status code.
124 * @param pszFilename Name of the image file to create. Guaranteed to be available and
125 * unchanged during the lifetime of this image.
126 * @param cbSize Image size in bytes.
127 * @param uImageFlags Flags specifying special image features.
128 * @param pszComment Pointer to image comment. NULL is ok.
129 * @param pPCHSGeometry Physical drive geometry CHS <= (16383,16,255).
130 * @param pLCHSGeometry Logical drive geometry CHS <= (1024,255,63).
131 * @param pUuid New UUID of the image. Not NULL.
132 * @param uOpenFlags Image file open mode, see VD_OPEN_FLAGS_* constants.
133 * @param uPercentStart Starting value for progress percentage.
134 * @param uPercentSpan Span for varying progress percentage.
135 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
136 * @param pVDIfsImage Pointer to the per-image VD interface list.
137 * @param pVDIfsOperation Pointer to the per-operation VD interface list.
138 * @param enmType Requested type of the image.
139 * @param ppBackendData Opaque state data for this image.
140 */
141 DECLR3CALLBACKMEMBER(int, pfnCreate, (const char *pszFilename, uint64_t cbSize,
142 unsigned uImageFlags, const char *pszComment,
143 PCVDGEOMETRY pPCHSGeometry,
144 PCVDGEOMETRY pLCHSGeometry,
145 PCRTUUID pUuid, unsigned uOpenFlags,
146 unsigned uPercentStart, unsigned uPercentSpan,
147 PVDINTERFACE pVDIfsDisk,
148 PVDINTERFACE pVDIfsImage,
149 PVDINTERFACE pVDIfsOperation,
150 VDTYPE enmType,
151 void **ppBackendData));
152
153 /**
154 * Rename a disk image. Only needs to work as long as the operating
155 * system's rename file functionality is usable. If an attempt is made to
156 * rename an image to a location on another disk/filesystem, this function
157 * may just fail with an appropriate error code (not changing the opened
158 * image data at all). Also works only on images which actually refer to
159 * regular files. May be NULL.
160 *
161 * @returns VBox status code.
162 * @param pBackendData Opaque state data for this image.
163 * @param pszFilename New name of the image file. Guaranteed to be available and
164 * unchanged during the lifetime of this image.
165 */
166 DECLR3CALLBACKMEMBER(int, pfnRename, (void *pBackendData, const char *pszFilename));
167
168 /**
169 * Close a disk image.
170 *
171 * @returns VBox status code.
172 * @param pBackendData Opaque state data for this image.
173 * @param fDelete If true, delete the image from the host disk.
174 */
175 DECLR3CALLBACKMEMBER(int, pfnClose, (void *pBackendData, bool fDelete));
176
177 /**
178 * Start a read request.
179 *
180 * @returns VBox status code.
181 * @param pBackendData Opaque state data for this image.
182 * @param uOffset The offset of the virtual disk to read from.
183 * @param cbToRead How many bytes to read.
184 * @param pIoCtx I/O context associated with this request.
185 * @param pcbActuallyRead Pointer to returned number of bytes read.
186 */
187 DECLR3CALLBACKMEMBER(int, pfnRead, (void *pBackendData, uint64_t uOffset, size_t cbToRead,
188 PVDIOCTX pIoCtx, size_t *pcbActuallyRead));
189
190 /**
191 * Start a write request.
192 *
193 * @returns VBox status code.
194 * @param pBackendData Opaque state data for this image.
195 * @param uOffset The offset of the virtual disk to write to.
196 * @param cbToWrite How many bytes to write.
197 * @param pIoCtx I/O context associated with this request.
198 * @param pcbWriteProcess Pointer to returned number of bytes that could
199 * be processed. In case the function returned
200 * VERR_VD_BLOCK_FREE this is the number of bytes
201 * that could be written in a full block write,
202 * when prefixed/postfixed by the appropriate
203 * amount of (previously read) padding data.
204 * @param pcbPreRead Pointer to the returned amount of data that must
205 * be prefixed to perform a full block write.
206 * @param pcbPostRead Pointer to the returned amount of data that must
207 * be postfixed to perform a full block write.
208 * @param fWrite Flags which affect write behavior. Combination
209 * of the VD_WRITE_* flags.
210 */
211 DECLR3CALLBACKMEMBER(int, pfnWrite, (void *pBackendData, uint64_t uOffset, size_t cbToWrite,
212 PVDIOCTX pIoCtx,
213 size_t *pcbWriteProcess, size_t *pcbPreRead,
214 size_t *pcbPostRead, unsigned fWrite));
215
216 /**
217 * Flush data to disk.
218 *
219 * @returns VBox status code.
220 * @param pBackendData Opaque state data for this image.
221 * @param pIoCtx I/O context associated with this request.
222 */
223 DECLR3CALLBACKMEMBER(int, pfnFlush, (void *pBackendData, PVDIOCTX pIoCtx));
224
225 /**
226 * Discards the given amount of bytes decreasing the size of the image if possible
227 *
228 * @returns VBox status code.
229 * @retval VERR_VD_DISCARD_ALIGNMENT_NOT_MET if the range doesn't meet the required alignment
230 * for the discard.
231 * @param pBackendData Opaque state data for this image.
232 * @param pIoCtx I/O context associated with this request.
233 * @param uOffset The offset of the first byte to discard.
234 * @param cbDiscard How many bytes to discard.
235 * @param pcbPreAllocated Pointer to the returned amount of bytes that must
236 * be discarded before the range to perform a full
237 * block discard.
238 * @param pcbPostAllocated Pointer to the returned amount of bytes that must
239 * be discarded after the range to perform a full
240 * block discard.
241 * @param pcbActuallyDiscarded Pointer to the returned amount of bytes which
242 * could be actually discarded.
243 * @param ppbmAllocationBitmap Where to store the pointer to the allocation bitmap
244 * if VERR_VD_DISCARD_ALIGNMENT_NOT_MET is returned or NULL
245 * if the allocation bitmap should be returned.
246 * @param fDiscard Flags which affect discard behavior. Combination
247 * of the VD_DISCARD_* flags.
248 */
249 DECLR3CALLBACKMEMBER(int, pfnDiscard, (void *pBackendData, PVDIOCTX pIoCtx,
250 uint64_t uOffset, size_t cbDiscard,
251 size_t *pcbPreAllocated,
252 size_t *pcbPostAllocated,
253 size_t *pcbActuallyDiscarded,
254 void **ppbmAllocationBitmap,
255 unsigned fDiscard));
256
257 /**
258 * Get the version of a disk image.
259 *
260 * @returns version of disk image.
261 * @param pBackendData Opaque state data for this image.
262 */
263 DECLR3CALLBACKMEMBER(unsigned, pfnGetVersion, (void *pBackendData));
264
265 /**
266 * Get the file size of a disk image.
267 *
268 * @returns size of disk image in bytes.
269 * @param pBackendData Opaque state data for this image.
270 */
271 DECLR3CALLBACKMEMBER(uint64_t, pfnGetFileSize, (void *pBackendData));
272
273 /**
274 * Get virtual disk PCHS geometry stored in a disk image.
275 *
276 * @returns VBox status code.
277 * @returns VERR_VD_GEOMETRY_NOT_SET if no geometry present in the image.
278 * @param pBackendData Opaque state data for this image.
279 * @param pPCHSGeometry Where to store the geometry. Not NULL.
280 */
281 DECLR3CALLBACKMEMBER(int, pfnGetPCHSGeometry, (void *pBackendData, PVDGEOMETRY pPCHSGeometry));
282
283 /**
284 * Set virtual disk PCHS geometry stored in a disk image.
285 * Only called if geometry is different than before.
286 *
287 * @returns VBox status code.
288 * @param pBackendData Opaque state data for this image.
289 * @param pPCHSGeometry Where to load the geometry from. Not NULL.
290 */
291 DECLR3CALLBACKMEMBER(int, pfnSetPCHSGeometry, (void *pBackendData, PCVDGEOMETRY pPCHSGeometry));
292
293 /**
294 * Get virtual disk LCHS geometry stored in a disk image.
295 *
296 * @returns VBox status code.
297 * @returns VERR_VD_GEOMETRY_NOT_SET if no geometry present in the image.
298 * @param pBackendData Opaque state data for this image.
299 * @param pLCHSGeometry Where to store the geometry. Not NULL.
300 */
301 DECLR3CALLBACKMEMBER(int, pfnGetLCHSGeometry, (void *pBackendData, PVDGEOMETRY pLCHSGeometry));
302
303 /**
304 * Set virtual disk LCHS geometry stored in a disk image.
305 * Only called if geometry is different than before.
306 *
307 * @returns VBox status code.
308 * @param pBackendData Opaque state data for this image.
309 * @param pLCHSGeometry Where to load the geometry from. Not NULL.
310 */
311 DECLR3CALLBACKMEMBER(int, pfnSetLCHSGeometry, (void *pBackendData, PCVDGEOMETRY pLCHSGeometry));
312
313 /**
314 * Returns a region list for the disk image if supported, optional.
315 *
316 * @returns VBox status code.
317 * @retval VERR_NOT_SUPPORTED if region lists are not supported for this kind of image.
318 * @param pBackendData Opaque state data for this image.
319 * @param ppRegionList Where to store the pointer to the region list on success.
320 */
321 DECLR3CALLBACKMEMBER(int, pfnQueryRegions, (void *pBackendData, PCVDREGIONLIST *ppRegionList));
322
323 /**
324 * Releases the region list acquired with VDIMAGEBACKEND::pfnQueryRegions() before.
325 *
326 * @returns nothing.
327 * @param pBackendData Opaque state data for this image.
328 * @param pRegionList The region list to release.
329 */
330 DECLR3CALLBACKMEMBER(void, pfnRegionListRelease, (void *pBackendData, PCVDREGIONLIST pRegionList));
331
332 /**
333 * Get the image flags of a disk image.
334 *
335 * @returns image flags of disk image (VD_IMAGE_FLAGS_XXX).
336 * @param pBackendData Opaque state data for this image.
337 */
338 DECLR3CALLBACKMEMBER(unsigned, pfnGetImageFlags, (void *pBackendData));
339
340 /**
341 * Get the open flags of a disk image.
342 *
343 * @returns open flags of disk image (VD_OPEN_FLAGS_XXX).
344 * @param pBackendData Opaque state data for this image.
345 */
346 DECLR3CALLBACKMEMBER(unsigned, pfnGetOpenFlags, (void *pBackendData));
347
348 /**
349 * Set the open flags of a disk image.
350 *
351 * May cause the image to be locked in a different mode or be reopened (which
352 * can fail).
353 *
354 * @returns VBox status code.
355 * @param pBackendData Opaque state data for this image.
356 * @param uOpenFlags New open flags for this image (VD_OPEN_FLAGS_XXX).
357 */
358 DECLR3CALLBACKMEMBER(int, pfnSetOpenFlags, (void *pBackendData, unsigned uOpenFlags));
359
360 /**
361 * Get comment of a disk image.
362 *
363 * @returns VBox status code.
364 * @param pBackendData Opaque state data for this image.
365 * @param pszComment Where to store the comment.
366 * @param cbComment Size of the comment buffer.
367 */
368 DECLR3CALLBACKMEMBER(int, pfnGetComment, (void *pBackendData, char *pszComment, size_t cbComment));
369
370 /**
371 * Set comment of a disk image.
372 *
373 * @returns VBox status code.
374 * @param pBackendData Opaque state data for this image.
375 * @param pszComment Where to get the comment from. NULL resets comment.
376 * The comment is silently truncated if the image format
377 * limit is exceeded.
378 */
379 DECLR3CALLBACKMEMBER(int, pfnSetComment, (void *pBackendData, const char *pszComment));
380
381 /**
382 * Get UUID of a disk image.
383 *
384 * @returns VBox status code.
385 * @param pBackendData Opaque state data for this image.
386 * @param pUuid Where to store the image UUID.
387 */
388 DECLR3CALLBACKMEMBER(int, pfnGetUuid, (void *pBackendData, PRTUUID pUuid));
389
390 /**
391 * Set UUID of a disk image.
392 *
393 * @returns VBox status code.
394 * @param pBackendData Opaque state data for this image.
395 * @param pUuid Where to get the image UUID from.
396 */
397 DECLR3CALLBACKMEMBER(int, pfnSetUuid, (void *pBackendData, PCRTUUID pUuid));
398
399 /**
400 * Get last modification UUID of a disk image.
401 *
402 * @returns VBox status code.
403 * @param pBackendData Opaque state data for this image.
404 * @param pUuid Where to store the image modification UUID.
405 */
406 DECLR3CALLBACKMEMBER(int, pfnGetModificationUuid, (void *pBackendData, PRTUUID pUuid));
407
408 /**
409 * Set last modification UUID of a disk image.
410 *
411 * @returns VBox status code.
412 * @param pBackendData Opaque state data for this image.
413 * @param pUuid Where to get the image modification UUID from.
414 */
415 DECLR3CALLBACKMEMBER(int, pfnSetModificationUuid, (void *pBackendData, PCRTUUID pUuid));
416
417 /**
418 * Get parent UUID of a disk image.
419 *
420 * @returns VBox status code.
421 * @param pBackendData Opaque state data for this image.
422 * @param pUuid Where to store the parent image UUID.
423 */
424 DECLR3CALLBACKMEMBER(int, pfnGetParentUuid, (void *pBackendData, PRTUUID pUuid));
425
426 /**
427 * Set parent UUID of a disk image.
428 *
429 * @returns VBox status code.
430 * @param pBackendData Opaque state data for this image.
431 * @param pUuid Where to get the parent image UUID from.
432 */
433 DECLR3CALLBACKMEMBER(int, pfnSetParentUuid, (void *pBackendData, PCRTUUID pUuid));
434
435 /**
436 * Get parent modification UUID of a disk image.
437 *
438 * @returns VBox status code.
439 * @param pBackendData Opaque state data for this image.
440 * @param pUuid Where to store the parent image modification UUID.
441 */
442 DECLR3CALLBACKMEMBER(int, pfnGetParentModificationUuid, (void *pBackendData, PRTUUID pUuid));
443
444 /**
445 * Set parent modification UUID of a disk image.
446 *
447 * @returns VBox status code.
448 * @param pBackendData Opaque state data for this image.
449 * @param pUuid Where to get the parent image modification UUID from.
450 */
451 DECLR3CALLBACKMEMBER(int, pfnSetParentModificationUuid, (void *pBackendData, PCRTUUID pUuid));
452
453 /**
454 * Dump information about a disk image.
455 *
456 * @param pBackendData Opaque state data for this image.
457 */
458 DECLR3CALLBACKMEMBER(void, pfnDump, (void *pBackendData));
459
460 /**
461 * Get a time stamp of a disk image. May be NULL.
462 *
463 * @returns VBox status code.
464 * @param pBackendData Opaque state data for this image.
465 * @param pTimestamp Where to store the time stamp.
466 */
467 DECLR3CALLBACKMEMBER(int, pfnGetTimestamp, (void *pBackendData, PRTTIMESPEC pTimestamp));
468
469 /**
470 * Get the parent time stamp of a disk image. May be NULL.
471 *
472 * @returns VBox status code.
473 * @param pBackendData Opaque state data for this image.
474 * @param pTimestamp Where to store the time stamp.
475 */
476 DECLR3CALLBACKMEMBER(int, pfnGetParentTimestamp, (void *pBackendData, PRTTIMESPEC pTimestamp));
477
478 /**
479 * Set the parent time stamp of a disk image. May be NULL.
480 *
481 * @returns VBox status code.
482 * @param pBackendData Opaque state data for this image.
483 * @param pTimestamp Where to get the time stamp from.
484 */
485 DECLR3CALLBACKMEMBER(int, pfnSetParentTimestamp, (void *pBackendData, PCRTTIMESPEC pTimestamp));
486
487 /**
488 * Get the relative path to parent image. May be NULL.
489 *
490 * @returns VBox status code.
491 * @param pBackendData Opaque state data for this image.
492 * @param ppszParentFilename Where to store the path.
493 */
494 DECLR3CALLBACKMEMBER(int, pfnGetParentFilename, (void *pBackendData, char **ppszParentFilename));
495
496 /**
497 * Set the relative path to parent image. May be NULL.
498 *
499 * @returns VBox status code.
500 * @param pBackendData Opaque state data for this image.
501 * @param pszParentFilename Where to get the path from.
502 */
503 DECLR3CALLBACKMEMBER(int, pfnSetParentFilename, (void *pBackendData, const char *pszParentFilename));
504
505 /** Returns a human readable hard disk location string given a
506 * set of hard disk configuration keys. The returned string is an
507 * equivalent of the full file path for image-based hard disks.
508 * Mandatory for backends with no VD_CAP_FILE and NULL otherwise. */
509 DECLR3CALLBACKMEMBER(int, pfnComposeLocation, (PVDINTERFACE pConfig, char **pszLocation));
510
511 /** Returns a human readable hard disk name string given a
512 * set of hard disk configuration keys. The returned string is an
513 * equivalent of the file name part in the full file path for
514 * image-based hard disks. Mandatory for backends with no
515 * VD_CAP_FILE and NULL otherwise. */
516 DECLR3CALLBACKMEMBER(int, pfnComposeName, (PVDINTERFACE pConfig, char **pszName));
517
518 /**
519 * Compact the image. The pointer may be NULL, indicating that this
520 * isn't supported yet (for file-based images) or not necessary.
521 *
522 * @returns VBox status code.
523 * @returns VERR_NOT_SUPPORTED if this image cannot be compacted yet.
524 * @param pBackendData Opaque state data for this image.
525 * @param uPercentStart Starting value for progress percentage.
526 * @param uPercentSpan Span for varying progress percentage.
527 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
528 * @param pVDIfsImage Pointer to the per-image VD interface list.
529 * @param pVDIfsOperation Pointer to the per-operation VD interface list.
530 */
531 DECLR3CALLBACKMEMBER(int, pfnCompact, (void *pBackendData,
532 unsigned uPercentStart, unsigned uPercentSpan,
533 PVDINTERFACE pVDIfsDisk,
534 PVDINTERFACE pVDIfsImage,
535 PVDINTERFACE pVDIfsOperation));
536
537 /**
538 * Resize the image. The pointer may be NULL, indicating that this
539 * isn't supported yet (for file-based images) or not necessary.
540 *
541 * @returns VBox status code.
542 * @returns VERR_NOT_SUPPORTED if this image cannot be resized yet.
543 * @param pBackendData Opaque state data for this image.
544 * @param cbSize New size of the image.
545 * @param pPCHSGeometry Pointer to the new physical disk geometry <= (16383,16,63). Not NULL.
546 * @param pLCHSGeometry Pointer to the new logical disk geometry <= (x,255,63). Not NULL.
547 * @param uPercentStart Starting value for progress percentage.
548 * @param uPercentSpan Span for varying progress percentage.
549 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
550 * @param pVDIfsImage Pointer to the per-image VD interface list.
551 * @param pVDIfsOperation Pointer to the per-operation VD interface list.
552 */
553 DECLR3CALLBACKMEMBER(int, pfnResize, (void *pBackendData,
554 uint64_t cbSize,
555 PCVDGEOMETRY pPCHSGeometry,
556 PCVDGEOMETRY pLCHSGeometry,
557 unsigned uPercentStart, unsigned uPercentSpan,
558 PVDINTERFACE pVDIfsDisk,
559 PVDINTERFACE pVDIfsImage,
560 PVDINTERFACE pVDIfsOperation));
561
562 /**
563 * Try to repair the given image.
564 *
565 * @returns VBox status code.
566 * @param pszFilename Name of the image file.
567 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
568 * @param pVDIfsImage Pointer to the per-image VD interface list.
569 * @param fFlags Combination of the VD_REPAIR_* flags.
570 */
571 DECLR3CALLBACKMEMBER(int, pfnRepair, (const char *pszFilename, PVDINTERFACE pVDIfsDisk,
572 PVDINTERFACE pVDIfsImage, uint32_t fFlags));
573
574 /**
575 * Traverse all metadata of the opened image.
576 *
577 * @returns VBox status code.
578 * @param pBackendData Opaque state data for this image.
579 * @param fFlags Traverse flags, combination of VD_TRAVERSE_METDATA_* defines.
580 * @param pVDIfsDisk Pointer to the per-disk VD interface list.
581 * @param pVDIfsImage Pointer to the per-image VD interface list.
582 * @param pVDIfsOperation Pointer to the per-operation VD interface list.
583 */
584 DECLR3CALLBACKMEMBER(int, pfnTraverseMetadata, (void *pBackendData, uint32_t fFlags,
585 PVDINTERFACE pVDIfsDisk,
586 PVDINTERFACE pVDIfsImage,
587 PVDINTERFACE pVDIfsOperation));
588
589 /** Initialization safty marker. */
590 uint32_t u32VersionEnd;
591
592} VDIMAGEBACKEND;
593
594/** Pointer to VD backend. */
595typedef VDIMAGEBACKEND *PVDIMAGEBACKEND;
596/** Constant pointer to VD backend. */
597typedef const VDIMAGEBACKEND *PCVDIMAGEBACKEND;
598
599/** The current version of the VDIMAGEBACKEND structure. */
600#define VD_IMGBACKEND_VERSION VD_VERSION_MAKE(0xff01, 3, 0)
601
602/** @copydoc VDIMAGEBACKEND::pfnComposeLocation */
603DECLCALLBACK(int) genericFileComposeLocation(PVDINTERFACE pConfig, char **pszLocation);
604/** @copydoc VDIMAGEBACKEND::pfnComposeName */
605DECLCALLBACK(int) genericFileComposeName(PVDINTERFACE pConfig, char **pszName);
606
607#endif /* !VBOX_INCLUDED_vd_image_backend_h */
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette