vusb.h@ 24130

Last change on this file since 24130 was 21217, checked in by vboxsync, 15 years ago
include/VBox/*.h: Mark which components the header files relate to.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 31.9 KB

Line
1	/** @file
2	* VUSB - VirtualBox USB. (DEV,VMM)
3	*/
4
5	/*
6	* Copyright (C) 2006-2007 Sun Microsystems, Inc.
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License (GPL) as published by the Free Software
12	* Foundation, in version 2 as it comes in the "COPYING" file of the
13	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* The contents of this file may alternatively be used under the terms
17	* of the Common Development and Distribution License Version 1.0
18	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19	* VirtualBox OSE distribution, in which case the provisions of the
20	* CDDL are applicable instead of those of the GPL.
21	*
22	* You may elect to license modified versions of this file under the
23	* terms and conditions of either the GPL or the CDDL or both.
24	*
25	* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
26	* Clara, CA 95054 USA or visit http://www.sun.com if you need
27	* additional information or have any questions.
28	*/
29
30	#ifndef ___VBox_vusb_h
31	#define ___VBox_vusb_h
32
33	#include <VBox/cdefs.h>
34	#include <VBox/types.h>
35
36	RT_C_DECLS_BEGIN
37
38	/** @defgroup grp_vusb VBox USB API
39	* @{
40	*/
41
42	/** @defgroup grp_vusb_std Standard Stuff
43	* @{ */
44
45	/** Frequency of USB bus (from spec). */
46	#define VUSB_BUS_HZ 12000000
47
48
49	/** @name USB Descriptor types (from spec)
50	* @{ */
51	#define VUSB_DT_DEVICE 0x01
52	#define VUSB_DT_CONFIG 0x02
53	#define VUSB_DT_STRING 0x03
54	#define VUSB_DT_INTERFACE 0x04
55	#define VUSB_DT_ENDPOINT 0x05
56	#define VUSB_DT_DEVICE_QUALIFIER 0x06
57	#define VUSB_DT_OTHER_SPEED_CFG 0x07
58	#define VUSB_DT_INTERFACE_POWER 0x08
59	/** @} */
60
61	/** @name USB Descriptor minimum sizes (from spec)
62	* @{ */
63	#define VUSB_DT_DEVICE_MIN_LEN 18
64	#define VUSB_DT_CONFIG_MIN_LEN 9
65	#define VUSB_DT_CONFIG_STRING_MIN_LEN 2
66	#define VUSB_DT_INTERFACE_MIN_LEN 9
67	#define VUSB_DT_ENDPOINT_MIN_LEN 7
68	/** @} */
69
70
71	#pragma pack(1) /* ensure byte packing of the descriptors. */
72
73	/**
74	* USB language id descriptor (from specs).
75	*/
76	typedef struct VUSBDESCLANGID
77	{
78	uint8_t bLength;
79	uint8_t bDescriptorType;
80	} VUSBDESCLANGID;
81	/** Pointer to a USB language id descriptor. */
82	typedef VUSBDESCLANGID *PVUSBDESCLANGID;
83	/** Pointer to a const USB language id descriptor. */
84	typedef const VUSBDESCLANGID *PCVUSBDESCLANGID;
85
86
87	/**
88	* USB string descriptor (from specs).
89	*/
90	typedef struct VUSBDESCSTRING
91	{
92	uint8_t bLength;
93	uint8_t bDescriptorType;
94	} VUSBDESCSTRING;
95	/** Pointer to a USB string descriptor. */
96	typedef VUSBDESCSTRING *PVUSBDESCSTRING;
97	/** Pointer to a const USB string descriptor. */
98	typedef const VUSBDESCSTRING *PCVUSBDESCSTRING;
99
100
101	/**
102	* USB device descriptor (from spec)
103	*/
104	typedef struct VUSBDESCDEVICE
105	{
106	uint8_t bLength;
107	uint8_t bDescriptorType;
108	uint16_t bcdUSB;
109	uint8_t bDeviceClass;
110	uint8_t bDeviceSubClass;
111	uint8_t bDeviceProtocol;
112	uint8_t bMaxPacketSize0;
113	uint16_t idVendor;
114	uint16_t idProduct;
115	uint16_t bcdDevice;
116	uint8_t iManufacturer;
117	uint8_t iProduct;
118	uint8_t iSerialNumber;
119	uint8_t bNumConfigurations;
120	} VUSBDESCDEVICE;
121	/** Pointer to a USB device descriptor. */
122	typedef VUSBDESCDEVICE *PVUSBDESCDEVICE;
123	/** Pointer to a const USB device descriptor. */
124	typedef const VUSBDESCDEVICE *PCVUSBDESCDEVICE;
125
126
127	/**
128	* USB configuration descriptor (from spec).
129	*/
130	typedef struct VUSBDESCCONFIG
131	{
132	uint8_t bLength;
133	uint8_t bDescriptorType;
134	uint16_t wTotalLength; /*< recalculated by VUSB when involved in URB. /
135	uint8_t bNumInterfaces;
136	uint8_t bConfigurationValue;
137	uint8_t iConfiguration;
138	uint8_t bmAttributes;
139	uint8_t MaxPower;
140	} VUSBDESCCONFIG;
141	/** Pointer to a USB configuration descriptor. */
142	typedef VUSBDESCCONFIG *PVUSBDESCCONFIG;
143	/** Pointer to a readonly USB configuration descriptor. */
144	typedef const VUSBDESCCONFIG *PCVUSBDESCCONFIG;
145
146
147	/**
148	* USB interface descriptor (from spec)
149	*/
150	typedef struct VUSBDESCINTERFACE
151	{
152	uint8_t bLength;
153	uint8_t bDescriptorType;
154	uint8_t bInterfaceNumber;
155	uint8_t bAlternateSetting;
156	uint8_t bNumEndpoints;
157	uint8_t bInterfaceClass;
158	uint8_t bInterfaceSubClass;
159	uint8_t bInterfaceProtocol;
160	uint8_t iInterface;
161	} VUSBDESCINTERFACE;
162	/** Pointer to an USB interface descriptor. */
163	typedef VUSBDESCINTERFACE *PVUSBDESCINTERFACE;
164	/** Pointer to a const USB interface descriptor. */
165	typedef const VUSBDESCINTERFACE *PCVUSBDESCINTERFACE;
166
167
168	/**
169	* USB endpoint descriptor (from spec)
170	*/
171	typedef struct VUSBDESCENDPOINT
172	{
173	uint8_t bLength;
174	uint8_t bDescriptorType;
175	uint8_t bEndpointAddress;
176	uint8_t bmAttributes;
177	uint16_t wMaxPacketSize;
178	uint8_t bInterval;
179	} VUSBDESCENDPOINT;
180	/** Pointer to an USB endpoint descriptor. */
181	typedef VUSBDESCENDPOINT *PVUSBDESCENDPOINT;
182	/** Pointer to a const USB endpoint descriptor. */
183	typedef const VUSBDESCENDPOINT *PCVUSBDESCENDPOINT;
184
185	#pragma pack() /* end of the byte packing. */
186
187
188	/**
189	* USB configuration descriptor, the parsed variant used by VUSB.
190	*/
191	typedef struct VUSBDESCCONFIGEX
192	{
193	/** The USB descriptor data.
194	* @remark The wTotalLength member is recalculated before the data is passed to the guest. */
195	VUSBDESCCONFIG Core;
196	/** Pointer to additional descriptor bytes following what's covered by VUSBDESCCONFIG. */
197	void *pvMore;
198	/** Pointer to an array of the interfaces referenced in the configuration.
199	* Core.bNumInterfaces in size. */
200	const struct VUSBINTERFACE *iface;
201	} VUSBDESCCONFIGEX;
202	/** Pointer to a parsed USB configuration descriptor. */
203	typedef VUSBDESCCONFIGEX *PVUSBDESCCONFIGEX;
204	/** Pointer to a const parsed USB configuration descriptor. */
205	typedef const VUSBDESCCONFIGEX *PCVUSBDESCCONFIGEX;
206
207
208	/**
209	* For tracking the alternate interface settings of a configuration.
210	*/
211	typedef struct VUSBINTERFACE
212	{
213	/** Pointer to an array of interfaces. */
214	const struct VUSBDESCINTERFACEEX *setting;
215	/** The number of entries in the array. */
216	unsigned int num_settings;
217	} VUSBINTERFACE;
218	/** Pointer to a VUSBINTERFACE. */
219	typedef VUSBINTERFACE *PVUSBINTERFACE;
220	/** Pointer to a const VUSBINTERFACE. */
221	typedef const VUSBINTERFACE *PCVUSBINTERFACE;
222
223
224	/**
225	* USB interface descriptor, the parsed variant used by VUSB.
226	*/
227	typedef struct VUSBDESCINTERFACEEX
228	{
229	/** The USB descriptor data. */
230	VUSBDESCINTERFACE Core;
231	/** Pointer to additional descriptor bytes following what's covered by VUSBDESCINTERFACE. */
232	void *pvMore;
233	/** Pointer to an array of the endpoints referenced by the interface.
234	* Core.bNumEndpoints in size. */
235	const struct VUSBDESCENDPOINTEX *endpoint;
236	} VUSBDESCINTERFACEEX;
237	/** Pointer to an prased USB interface descriptor. */
238	typedef VUSBDESCINTERFACEEX *PVUSBDESCINTERFACEEX;
239	/** Pointer to a const parsed USB interface descriptor. */
240	typedef const VUSBDESCINTERFACEEX *PCVUSBDESCINTERFACEEX;
241
242
243	/**
244	* USB endpoint descriptor, the parsed variant used by VUSB.
245	*/
246	typedef struct VUSBDESCENDPOINTEX
247	{
248	/** The USB descriptor data.
249	* @remark The wMaxPacketSize member is converted to native endian. */
250	VUSBDESCENDPOINT Core;
251	/** Pointer to additional descriptor bytes following what's covered by VUSBDESCENDPOINT. */
252	void *pvMore;
253	} VUSBDESCENDPOINTEX;
254	/** Pointer to a parsed USB endpoint descriptor. */
255	typedef VUSBDESCENDPOINTEX *PVUSBDESCENDPOINTEX;
256	/** Pointer to a const parsed USB endpoint descriptor. */
257	typedef const VUSBDESCENDPOINTEX *PCVUSBDESCENDPOINTEX;
258
259
260	/** @name USB Control message recipient codes (from spec)
261	* @{ */
262	#define VUSB_TO_DEVICE 0x0
263	#define VUSB_TO_INTERFACE 0x1
264	#define VUSB_TO_ENDPOINT 0x2
265	#define VUSB_TO_OTHER 0x3
266	#define VUSB_RECIP_MASK 0x1f
267	/** @} */
268
269	/** @name USB control pipe setup packet structure (from spec)
270	* @{ */
271	#define VUSB_REQ_SHIFT (5)
272	#define VUSB_REQ_STANDARD (0x0 << VUSB_REQ_SHIFT)
273	#define VUSB_REQ_CLASS (0x1 << VUSB_REQ_SHIFT)
274	#define VUSB_REQ_VENDOR (0x2 << VUSB_REQ_SHIFT)
275	#define VUSB_REQ_RESERVED (0x3 << VUSB_REQ_SHIFT)
276	#define VUSB_REQ_MASK (0x3 << VUSB_REQ_SHIFT)
277	/** @} */
278
279	#define VUSB_DIR_TO_DEVICE 0x00
280	#define VUSB_DIR_TO_HOST 0x80
281	#define VUSB_DIR_MASK 0x80
282
283	/**
284	* USB Setup request (from spec)
285	*/
286	typedef struct vusb_setup
287	{
288	uint8_t bmRequestType;
289	uint8_t bRequest;
290	uint16_t wValue;
291	uint16_t wIndex;
292	uint16_t wLength;
293	} VUSBSETUP;
294	/** Pointer to a setup request. */
295	typedef VUSBSETUP *PVUSBSETUP;
296	/** Pointer to a const setup request. */
297	typedef const VUSBSETUP *PCVUSBSETUP;
298
299	/** @name USB Standard device requests (from spec)
300	* @{ */
301	#define VUSB_REQ_GET_STATUS 0x00
302	#define VUSB_REQ_CLEAR_FEATURE 0x01
303	#define VUSB_REQ_SET_FEATURE 0x03
304	#define VUSB_REQ_SET_ADDRESS 0x05
305	#define VUSB_REQ_GET_DESCRIPTOR 0x06
306	#define VUSB_REQ_SET_DESCRIPTOR 0x07
307	#define VUSB_REQ_GET_CONFIGURATION 0x08
308	#define VUSB_REQ_SET_CONFIGURATION 0x09
309	#define VUSB_REQ_GET_INTERFACE 0x0a
310	#define VUSB_REQ_SET_INTERFACE 0x0b
311	#define VUSB_REQ_SYNCH_FRAME 0x0c
312	#define VUSB_REQ_MAX 0x0d
313	/** @} */
314
315	/** @} / / end of grp_vusb_std */
316
317
318
319	/** @name USB Standard version flags.
320	* @{ */
321	/** Indicates USB 1.1 support. */
322	#define VUSB_STDVER_11 RT_BIT(1)
323	/** Indicates USB 2.0 support. */
324	#define VUSB_STDVER_20 RT_BIT(2)
325	/** @} */
326
327
328	/** Pointer to a VBox USB device interface. */
329	typedef struct VUSBIDEVICE *PVUSBIDEVICE;
330
331	/** Pointer to a VUSB RootHub port interface. */
332	typedef struct VUSBIROOTHUBPORT *PVUSBIROOTHUBPORT;
333
334	/** Pointer to an USB request descriptor. */
335	typedef struct VUSBURB *PVUSBURB;
336
337
338
339	/**
340	* VBox USB port bitmap.
341	*
342	* Bit 0 == Port 0, ... , Bit 127 == Port 127.
343	*/
344	typedef struct VUSBPORTBITMAP
345	{
346	/** 128 bits */
347	char ach[16];
348	} VUSBPORTBITMAP;
349	/** Pointer to a VBox USB port bitmap. */
350	typedef VUSBPORTBITMAP *PVUSBPORTBITMAP;
351
352
353	/**
354	* The VUSB RootHub port interface provided by the HCI.
355	*/
356	typedef struct VUSBIROOTHUBPORT
357	{
358	/**
359	* Get the number of avilable ports in the hub.
360	*
361	* @returns The number of ports available.
362	* @param pInterface Pointer to this structure.
363	* @param pAvailable Bitmap indicating the available ports. Set bit == available port.
364	*/
365	DECLR3CALLBACKMEMBER(unsigned, pfnGetAvailablePorts,(PVUSBIROOTHUBPORT pInterface, PVUSBPORTBITMAP pAvailable));
366
367	/**
368	* Gets the supported USB versions.
369	*
370	* @returns The mask of supported USB versions.
371	* @param pInterface Pointer to this structure.
372	*/
373	DECLR3CALLBACKMEMBER(uint32_t, pfnGetUSBVersions,(PVUSBIROOTHUBPORT pInterface));
374
375	/**
376	* A device is being attached to a port in the roothub.
377	*
378	* @param pInterface Pointer to this structure.
379	* @param pDev Pointer to the device being attached.
380	* @param uPort The port number assigned to the device.
381	*/
382	DECLR3CALLBACKMEMBER(int, pfnAttach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort));
383
384	/**
385	* A device is being detached from a port in the roothub.
386	*
387	* @param pInterface Pointer to this structure.
388	* @param pDev Pointer to the device being detached.
389	* @param uPort The port number assigned to the device.
390	*/
391	DECLR3CALLBACKMEMBER(void, pfnDetach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort));
392
393	/**
394	* Reset the root hub.
395	*
396	* @returns VBox status code.
397	* @param pInterface Pointer to this structure.
398	* @param pResetOnLinux Whether or not to do real reset on linux.
399	*/
400	DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIROOTHUBPORT pInterface, bool fResetOnLinux));
401
402	/**
403	* Transfer completion callback routine.
404	*
405	* VUSB will call this when a transfer have been completed
406	* in a one or another way.
407	*
408	* @param pInterface Pointer to this structure.
409	* @param pUrb Pointer to the URB in question.
410	*/
411	DECLR3CALLBACKMEMBER(void, pfnXferCompletion,(PVUSBIROOTHUBPORT pInterface, PVUSBURB urb));
412
413	/**
414	* Handle transfer errors.
415	*
416	* VUSB calls this when a transfer attempt failed. This function will respond
417	* indicating wheter to retry or complete the URB with failure.
418	*
419	* @returns Retry indicator.
420	* @param pInterface Pointer to this structure.
421	* @param pUrb Pointer to the URB in question.
422	*/
423	DECLR3CALLBACKMEMBER(bool, pfnXferError,(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb));
424
425	/** Alignment dummy. */
426	RTR3PTR Alignment;
427
428	} VUSBIROOTHUBPORT;
429
430
431	/** Pointer to a VUSB RootHub connector interface. */
432	typedef struct VUSBIROOTHUBCONNECTOR *PVUSBIROOTHUBCONNECTOR;
433
434	/**
435	* The VUSB RootHub connector interface provided by the VBox USB RootHub driver.
436	*/
437	typedef struct VUSBIROOTHUBCONNECTOR
438	{
439	/**
440	* Allocates a new URB for a transfer.
441	*
442	* Either submit using pfnSubmitUrb or free using VUSBUrbFree().
443	*
444	* @returns Pointer to a new URB.
445	* @returns NULL on failure - try again later.
446	* This will not fail if the device wasn't found. We'll fail it
447	* at submit time, since that makes the usage of this api simpler.
448	* @param pInterface Pointer to this struct.
449	* @param DstAddress The destination address of the URB.
450	* @param cbData The amount of data space required.
451	* @param cTds The amount of TD space.
452	*/
453	DECLR3CALLBACKMEMBER(PVUSBURB, pfnNewUrb,(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, uint32_t cbData, uint32_t cTds));
454
455	/**
456	* Submits a URB for transfer.
457	* The transfer will do asynchronously if possible.
458	*
459	* @returns VBox status code.
460	* @param pInterface Pointer to this struct.
461	* @param pUrb Pointer to the URB returned by pfnNewUrb.
462	* The URB will be freed in case of failure.
463	* @param pLed Pointer to USB Status LED
464	*/
465	DECLR3CALLBACKMEMBER(int, pfnSubmitUrb,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, struct PDMLED *pLed));
466
467	/**
468	* Call to service asynchronous URB completions in a polling fashion.
469	*
470	* Reaped URBs will be finished by calling the completion callback,
471	* thus there is no return code or input or anything from this function
472	* except for potential state changes elsewhere.
473	*
474	* @returns VINF_SUCCESS if no URBs are pending upon return.
475	* @returns VERR_TIMEOUT if one or more URBs are still in flight upon returning.
476	* @returns Other VBox status code.
477	*
478	* @param pInterface Pointer to this struct.
479	* @param cMillies Number of milliseconds to poll for completion.
480	*/
481	DECLR3CALLBACKMEMBER(void, pfnReapAsyncUrbs,(PVUSBIROOTHUBCONNECTOR pInterface, unsigned cMillies));
482
483	/**
484	* Cancels and completes - with CRC failure - all in-flight async URBs.
485	* This is typically done before saving a state.
486	*
487	* @param pInterface Pointer to this struct.
488	*/
489	DECLR3CALLBACKMEMBER(void, pfnCancelAllUrbs,(PVUSBIROOTHUBCONNECTOR pInterface));
490
491	/**
492	* Attach the device to the root hub.
493	* The device must not be attached to any hub for this call to succeed.
494	*
495	* @returns VBox status code.
496	* @param pInterface Pointer to this struct.
497	* @param pDevice Pointer to the device (interface) attach.
498	*/
499	DECLR3CALLBACKMEMBER(int, pfnAttachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice));
500
501	/**
502	* Detach the device from the root hub.
503	* The device must already be attached for this call to succeed.
504	*
505	* @returns VBox status code.
506	* @param pInterface Pointer to this struct.
507	* @param pDevice Pointer to the device (interface) to detach.
508	*/
509	DECLR3CALLBACKMEMBER(int, pfnDetachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice));
510
511	} VUSBIROOTHUBCONNECTOR;
512
513
514	#ifdef IN_RING3
515	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnNewUrb */
516	DECLINLINE(PVUSBURB) VUSBIRhNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t DstAddress, uint32_t cbData, uint32_t cTds)
517	{
518	return pInterface->pfnNewUrb(pInterface, DstAddress, cbData, cTds);
519	}
520
521	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnSubmitUrb */
522	DECLINLINE(int) VUSBIRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, struct PDMLED *pLed)
523	{
524	return pInterface->pfnSubmitUrb(pInterface, pUrb, pLed);
525	}
526
527	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnReapAsyncUrbs */
528	DECLINLINE(void) VUSBIRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, unsigned cMillies)
529	{
530	pInterface->pfnReapAsyncUrbs(pInterface, cMillies);
531	}
532
533	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnCancelAllUrbs */
534	DECLINLINE(void) VUSBIRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface)
535	{
536	pInterface->pfnCancelAllUrbs(pInterface);
537	}
538
539	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnAttachDevice */
540	DECLINLINE(int) VUSBIRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
541	{
542	return pInterface->pfnAttachDevice(pInterface, pDevice);
543	}
544
545	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnDetachDevice */
546	DECLINLINE(int) VUSBIRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
547	{
548	return pInterface->pfnDetachDevice(pInterface, pDevice);
549	}
550	#endif /* IN_RING3 */
551
552
553
554	/** Pointer to a Root Hub Configuration Interface. */
555	typedef struct VUSBIRHCONFIG *PVUSBIRHCONFIG;
556
557	/**
558	* Root Hub Configuration Interface (intended for MAIN).
559	*/
560	typedef struct VUSBIRHCONFIG
561	{
562	/**
563	* Creates a USB proxy device and attaches it to the root hub.
564	*
565	* @returns VBox status code.
566	* @param pInterface Pointer to the root hub configuration interface structure.
567	* @param pUuid Pointer to the UUID for the new device.
568	* @param fRemote Whether the device must use the VRDP backend.
569	* @param pszAddress OS specific device address.
570	* @param pvBackend An opaque pointer for the backend. Only used by
571	* the VRDP backend so far.
572	*/
573	DECLR3CALLBACKMEMBER(int, pfnCreateProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char pszAddress, void pvBackend));
574
575	/**
576	* Removes a USB proxy device from the root hub and destroys it.
577	*
578	* @returns VBox status code.
579	* @param pInterface Pointer to the root hub configuration interface structure.
580	* @param pUuid Pointer to the UUID for the device.
581	*/
582	DECLR3CALLBACKMEMBER(int, pfnDestroyProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid));
583
584	} VUSBIRHCONFIG;
585
586	#ifdef IN_RING3
587	/** @copydoc VUSBIRHCONFIG::pfnCreateProxyDevice */
588	DECLINLINE(int) VUSBIRhCreateProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char pszAddress, void pvBackend)
589	{
590	return pInterface->pfnCreateProxyDevice(pInterface, pUuid, fRemote, pszAddress, pvBackend);
591	}
592
593	/** @copydoc VUSBIRHCONFIG::pfnDestroyProxyDevice */
594	DECLINLINE(int) VUSBIRhDestroyProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid)
595	{
596	return pInterface->pfnDestroyProxyDevice(pInterface, pUuid);
597	}
598	#endif /* IN_RING3 */
599
600
601
602	/**
603	* VUSB device reset completion callback function.
604	* This is called by the reset thread when the reset has been completed.
605	*
606	* @param pDev Pointer to the virtual USB device core.
607	* @param rc The VBox status code of the reset operation.
608	* @param pvUser User specific argument.
609	*
610	* @thread The reset thread or EMT.
611	*/
612	typedef DECLCALLBACK(void) FNVUSBRESETDONE(PVUSBIDEVICE pDevice, int rc, void *pvUser);
613	/** Pointer to a device reset completion callback function (FNUSBRESETDONE). */
614	typedef FNVUSBRESETDONE *PFNVUSBRESETDONE;
615
616	/**
617	* The state of a VUSB Device.
618	*
619	* @remark The order of these states is vital.
620	*/
621	typedef enum VUSBDEVICESTATE
622	{
623	VUSB_DEVICE_STATE_INVALID = 0,
624	VUSB_DEVICE_STATE_DETACHED,
625	VUSB_DEVICE_STATE_ATTACHED,
626	VUSB_DEVICE_STATE_POWERED,
627	VUSB_DEVICE_STATE_DEFAULT,
628	VUSB_DEVICE_STATE_ADDRESS,
629	VUSB_DEVICE_STATE_CONFIGURED,
630	VUSB_DEVICE_STATE_SUSPENDED,
631	/** The device is being reset. Don't mess with it.
632	* Next states: VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_DESTROYED
633	*/
634	VUSB_DEVICE_STATE_RESET,
635	/** The device has been destroy. */
636	VUSB_DEVICE_STATE_DESTROYED,
637	/** The usual 32-bit hack. */
638	VUSB_DEVICE_STATE_32BIT_HACK = 0x7fffffff
639	} VUSBDEVICESTATE;
640
641
642	/**
643	* USB Device Interface.
644	*/
645	typedef struct VUSBIDEVICE
646	{
647	/**
648	* Resets the device.
649	*
650	* Since a device reset shall take at least 10ms from the guest point of view,
651	* it must be performed asynchronously. We create a thread which performs this
652	* operation and ensures it will take at least 10ms.
653	*
654	* At times - like init - a synchronous reset is required, this can be done
655	* by passing NULL for pfnDone.
656	*
657	* -- internal stuff, move it --
658	* While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state.
659	* On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful,
660	* or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed.
661	* -- internal stuff, move it --
662	*
663	* @returns VBox status code.
664	* @param pInterface Pointer to this structure.
665	* @param fResetOnLinux Set if we can permit a real reset and a potential logical
666	* device reconnect on linux hosts.
667	* @param pfnDone Pointer to the completion routine. If NULL a synchronous
668	* reset is preformed not respecting the 10ms.
669	* @param pvUser User argument to the completion routine.
670	* @param pVM Pointer to the VM handle if callback in EMT is required. (optional)
671	*/
672	DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIDEVICE pInterface, bool fResetOnLinux,
673	PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM));
674
675	/**
676	* Powers on the device.
677	*
678	* @returns VBox status code.
679	* @param pInterface Pointer to the device interface structure.
680	*/
681	DECLR3CALLBACKMEMBER(int, pfnPowerOn,(PVUSBIDEVICE pInterface));
682
683	/**
684	* Powers off the device.
685	*
686	* @returns VBox status code.
687	* @param pInterface Pointer to the device interface structure.
688	*/
689	DECLR3CALLBACKMEMBER(int, pfnPowerOff,(PVUSBIDEVICE pInterface));
690
691	/**
692	* Get the state of the device.
693	*
694	* @returns Device state.
695	* @param pInterface Pointer to the device interface structure.
696	*/
697	DECLR3CALLBACKMEMBER(VUSBDEVICESTATE, pfnGetState,(PVUSBIDEVICE pInterface));
698
699	} VUSBIDEVICE;
700
701
702	#ifdef IN_RING3
703	/**
704	* Resets the device.
705	*
706	* Since a device reset shall take at least 10ms from the guest point of view,
707	* it must be performed asynchronously. We create a thread which performs this
708	* operation and ensures it will take at least 10ms.
709	*
710	* At times - like init - a synchronous reset is required, this can be done
711	* by passing NULL for pfnDone.
712	*
713	* -- internal stuff, move it --
714	* While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state.
715	* On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful,
716	* or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed.
717	* -- internal stuff, move it --
718	*
719	* @returns VBox status code.
720	* @param pInterface Pointer to the device interface structure.
721	* @param fResetOnLinux Set if we can permit a real reset and a potential logical
722	* device reconnect on linux hosts.
723	* @param pfnDone Pointer to the completion routine. If NULL a synchronous
724	* reset is preformed not respecting the 10ms.
725	* @param pvUser User argument to the completion routine.
726	* @param pVM Pointer to the VM handle if callback in EMT is required. (optional)
727	*/
728	DECLINLINE(int) VUSBIDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM)
729	{
730	return pInterface->pfnReset(pInterface, fResetOnLinux, pfnDone, pvUser, pVM);
731	}
732
733	/**
734	* Powers on the device.
735	*
736	* @returns VBox status code.
737	* @param pInterface Pointer to the device interface structure.
738	*/
739	DECLINLINE(int) VUSBIDevPowerOn(PVUSBIDEVICE pInterface)
740	{
741	return pInterface->pfnPowerOn(pInterface);
742	}
743
744	/**
745	* Powers off the device.
746	*
747	* @returns VBox status code.
748	* @param pInterface Pointer to the device interface structure.
749	*/
750	DECLINLINE(int) VUSBIDevPowerOff(PVUSBIDEVICE pInterface)
751	{
752	return pInterface->pfnPowerOff(pInterface);
753	}
754
755	/**
756	* Get the state of the device.
757	*
758	* @returns Device state.
759	* @param pInterface Pointer to the device interface structure.
760	*/
761	DECLINLINE(VUSBDEVICESTATE) VUSBIDevGetState(PVUSBIDEVICE pInterface)
762	{
763	return pInterface->pfnGetState(pInterface);
764	}
765	#endif /* IN_RING3 */
766
767
768	/** @name URB
769	* @{ */
770
771	/**
772	* VUSB Transfer status codes.
773	*/
774	typedef enum VUSBSTATUS
775	{
776	/** Transer was ok. */
777	VUSBSTATUS_OK = 0,
778	/** Transfer stalled, endpoint halted. */
779	VUSBSTATUS_STALL,
780	/** Device not responding. */
781	VUSBSTATUS_DNR,
782	/** CRC error. */
783	VUSBSTATUS_CRC,
784	/** Data overrun error. */
785	VUSBSTATUS_DATA_UNDERRUN,
786	/** Data overrun error. */
787	VUSBSTATUS_DATA_OVERRUN,
788	/** The isochronous buffer hasn't been touched. */
789	VUSBSTATUS_NOT_ACCESSED,
790	/** Invalid status. */
791	VUSBSTATUS_INVALID = 0x7f
792	} VUSBSTATUS;
793
794
795	/**
796	* VUSB Transfer types.
797	*/
798	typedef enum VUSBXFERTYPE
799	{
800	/** Control message. Used to represent a single control transfer. */
801	VUSBXFERTYPE_CTRL = 0,
802	/* Isochronous transfer. */
803	VUSBXFERTYPE_ISOC,
804	/** Bulk transfer. */
805	VUSBXFERTYPE_BULK,
806	/** Interrupt transfer. */
807	VUSBXFERTYPE_INTR,
808	/** Complete control message. Used to represent an entire control message. */
809	VUSBXFERTYPE_MSG,
810	/** Invalid transfer type. */
811	VUSBXFERTYPE_INVALID = 0x7f
812	} VUSBXFERTYPE;
813
814
815	/**
816	* VUSB transfer direction.
817	*/
818	typedef enum VUSBDIRECTION
819	{
820	/** Setup */
821	VUSBDIRECTION_SETUP = 0,
822	#define VUSB_DIRECTION_SETUP VUSBDIRECTION_SETUP
823	/** In - Device to host. */
824	VUSBDIRECTION_IN = 1,
825	#define VUSB_DIRECTION_IN VUSBDIRECTION_IN
826	/** Out - Host to device. */
827	VUSBDIRECTION_OUT = 2,
828	#define VUSB_DIRECTION_OUT VUSBDIRECTION_OUT
829	/** Invalid direction */
830	VUSBDIRECTION_INVALID = 0x7f
831	} VUSBDIRECTION;
832
833	/**
834	* The URB states
835	*/
836	typedef enum VUSBURBSTATE
837	{
838	/** The usual invalid state. */
839	VUSBURBSTATE_INVALID = 0,
840	/** The URB is free, i.e. not in use.
841	* Next state: ALLOCATED */
842	VUSBURBSTATE_FREE,
843	/** The URB is allocated, i.e. being prepared for submission.
844	* Next state: FREE, IN_FLIGHT */
845	VUSBURBSTATE_ALLOCATED,
846	/** The URB is in flight.
847	* Next state: REAPED, CANCELLED */
848	VUSBURBSTATE_IN_FLIGHT,
849	/** The URB has been reaped and is being completed.
850	* Next state: FREE */
851	VUSBURBSTATE_REAPED,
852	/** The URB has been cancelled and is awaiting reaping and immediate freeing.
853	* Next state: FREE */
854	VUSBURBSTATE_CANCELLED,
855	/** The end of the valid states (exclusive). */
856	VUSBURBSTATE_END,
857	/** The usual 32-bit blow up. */
858	VUSBURBSTATE_32BIT_HACK = 0x7fffffff
859	} VUSBURBSTATE;
860
861
862	/**
863	* Information about a isochronous packet.
864	*/
865	typedef struct VUSBURBISOCPKT
866	{
867	/** The size of the packet.
868	* IN: The packet size. I.e. the number of bytes to the next packet or end of buffer.
869	* OUT: The actual size transfered. */
870	uint16_t cb;
871	/** The offset of the packet. (Relative to VUSBURB::abData[0].)
872	* OUT: This can be changed by the USB device if it does some kind of buffer squeezing. */
873	uint16_t off;
874	/** The status of the transfer.
875	* IN: VUSBSTATUS_INVALID
876	* OUT: VUSBSTATUS_INVALID if nothing was done, otherwise the correct status. */
877	VUSBSTATUS enmStatus;
878	} VUSBURBISOCPKT;
879	/** Pointer to a isochronous packet. */
880	typedef VUSBURBISOCPKT *PVUSBURBISOCPTK;
881	/** Pointer to a const isochronous packet. */
882	typedef const VUSBURBISOCPKT *PCVUSBURBISOCPKT;
883
884	/**
885	* Asynchronous USB request descriptor
886	*/
887	typedef struct VUSBURB
888	{
889	/** URB magic value. */
890	uint32_t u32Magic;
891	/** The USR state. */
892	VUSBURBSTATE enmState;
893	/** URB description, can be null. intended for logging. */
894	char *pszDesc;
895
896	/** The VUSB data. */
897	struct VUSBURBVUSB
898	{
899	/** URB chain pointer. */
900	PVUSBURB pNext;
901	/** URB chain pointer. */
902	PVUSBURB *ppPrev;
903	/** Pointer to the original for control messages. */
904	PVUSBURB pCtrlUrb;
905	/** Pointer to the VUSB device.
906	* This may be NULL if the destination address is invalid. */
907	struct VUSBDEV *pDev;
908	/** Sepcific to the pfnFree function. */
909	void *pvFreeCtx;
910	/**
911	* Callback which will free the URB once it's reaped and completed.
912	* @param pUrb The URB.
913	*/
914	DECLCALLBACKMEMBER(void, pfnFree)(PVUSBURB pUrb);
915	/** Submit timestamp. (logging only) */
916	uint64_t u64SubmitTS;
917	/** The allocated data length. */
918	uint32_t cbDataAllocated;
919	/** The allocated TD length. */
920	uint32_t cTdsAllocated;
921	} VUsb;
922
923	/** The host controller data. */
924	struct VUSBURBHCI
925	{
926	/** The endpoint descriptor address. */
927	RTGCPHYS32 EdAddr;
928	/** Number of Tds in the array. */
929	uint32_t cTds;
930	/** Pointer to an array of TD info items.*/
931	struct VUSBURBHCITD
932	{
933	/** Type of TD (private) */
934	uint32_t TdType;
935	/** The address of the */
936	RTGCPHYS32 TdAddr;
937	/** A copy of the TD. */
938	uint32_t TdCopy[16];
939	} *paTds;
940	/** URB chain pointer. */
941	PVUSBURB pNext;
942	/** When this URB was created.
943	* (Used for isochronous frames and for logging.) */
944	uint32_t u32FrameNo;
945	/** Flag indicating that the TDs have been unlinked. */
946	bool fUnlinked;
947	} Hci;
948
949	/** The device data. */
950	struct VUSBURBDEV
951	{
952	/** Pointer to the proxy URB. */
953	void *pvProxyUrb;
954	} Dev;
955
956	/** The USB device instance this belongs to.
957	* This is NULL if the device address is invalid, in which case this belongs to the hub. */
958	PPDMUSBINS pUsbIns;
959	/** The device address.
960	* This is set at allocation time. */
961	uint8_t DstAddress;
962
963	/** The endpoint.
964	* IN: Must be set before submitting the URB.
965	* @remark This does not have the high bit (direction) set! */
966	uint8_t EndPt;
967	/** The transfer type.
968	* IN: Must be set before submitting the URB. */
969	VUSBXFERTYPE enmType;
970	/** The transfer direction.
971	* IN: Must be set before submitting the URB. */
972	VUSBDIRECTION enmDir;
973	/** Indicates whether it is OK to receive/send less data than requested.
974	* IN: Must be initialized before submitting the URB. */
975	bool fShortNotOk;
976	/** The transfer status.
977	* OUT: This is set when reaping the URB. */
978	VUSBSTATUS enmStatus;
979
980	/** The number of isochronous packets describe in aIsocPkts.
981	* This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */
982	uint32_t cIsocPkts;
983	/** The iso packets within abData.
984	* This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */
985	VUSBURBISOCPKT aIsocPkts[8];
986
987	/** The message length.
988	* IN: The amount of data to send / receive - set at allocation time.
989	* OUT: The amount of data sent / received. */
990	uint32_t cbData;
991	/** The message data.
992	* IN: On host to device transfers, the data to send.
993	* OUT: On device to host transfers, the data to received. */
994	uint8_t abData[8*_1K];
995	} VUSBURB;
996
997	/** The magic value of a valid VUSBURB. (Murakami Haruki) */
998	#define VUSBURB_MAGIC 0x19490112
999
1000	/** @} */
1001
1002
1003	/** @} */
1004
1005	RT_C_DECLS_END
1006
1007	#endif

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/vusb.h@ 24130

Download in other formats: