vusb.h@ 666

Last change on this file since 666 was 475, checked in by vboxsync, 18 years ago
Ring-3 callbacks.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 23.6 KB

Line
1	/** @file
2	* VUSB - VirtualBox USB.
3	*/
4
5	/*
6	* Copyright (C) 2006 InnoTek Systemberatung GmbH
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License as published by the Free Software Foundation,
12	* in version 2 as it comes in the "COPYING" file of the VirtualBox OSE
13	* distribution. VirtualBox OSE is distributed in the hope that it will
14	* be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* If you received this file as part of a commercial VirtualBox
17	* distribution, then only the terms of your commercial VirtualBox
18	* license agreement apply instead of the previous paragraph.
19	*/
20
21	#ifndef __VBox_vusb_h__
22	#define __VBox_vusb_h__
23
24	#include <VBox/cdefs.h>
25	#include <VBox/types.h>
26
27	__BEGIN_DECLS
28
29	/** @defgroup grp_vusb VBox USB API
30	* @{
31	*/
32
33	/** Frequency of USB bus (from spec). */
34	#define VUSB_BUS_HZ 12000000
35
36
37	/** Pointer to a VBox USB device interface. */
38	typedef struct VUSBIDEVICE *PVUSBIDEVICE;
39
40	/** Pointer to a VUSB RootHub port interface. */
41	typedef struct VUSBIROOTHUBPORT *PVUSBIROOTHUBPORT;
42
43	/** Pointer to an USB request descriptor. */
44	typedef struct vusb_urb *PVUSBURB;
45
46
47
48	/**
49	* VBox USB port bitmap.
50	*
51	* Bit 0 == Port 0, ... , Bit 127 == Port 127.
52	*/
53	typedef struct VUSBPORTBITMAP
54	{
55	/** 128 bits */
56	char ach[16];
57	} VUSBPORTBITMAP;
58	/** Pointer to a VBox USB port bitmap. */
59	typedef VUSBPORTBITMAP *PVUSBPORTBITMAP;
60
61
62
63
64
65	/**
66	* The VUSB RootHub port interface provided by the HCI.
67	*/
68	typedef struct VUSBIROOTHUBPORT
69	{
70	/**
71	* Get the number of avilable ports in the hub.
72	*
73	* @returns The number of ports available.
74	* @param pInterface Pointer to this structure.
75	* @param pAvailable Bitmap indicating the available ports. Set bit == available port.
76	*/
77	DECLR3CALLBACKMEMBER(unsigned, pfnGetAvailablePorts,(PVUSBIROOTHUBPORT pInterface, PVUSBPORTBITMAP pAvailable));
78
79	/**
80	* A device is being attached to a port in the roothub.
81	*
82	* @param pInterface Pointer to this structure.
83	* @param pDev Pointer to the device being attached.
84	* @param uPort The port number assigned to the device.
85	*/
86	DECLR3CALLBACKMEMBER(int, pfnAttach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort));
87
88	/**
89	* A device is being detached from a port in the roothub.
90	*
91	* @param pInterface Pointer to this structure.
92	* @param pDev Pointer to the device being detached.
93	* @param uPort The port number assigned to the device.
94	*/
95	DECLR3CALLBACKMEMBER(void, pfnDetach,(PVUSBIROOTHUBPORT pInterface, PVUSBIDEVICE pDev, unsigned uPort));
96
97	/**
98	* Reset the root hub.
99	*
100	* @returns VBox status code.
101	* @param pInterface Pointer to this structure.
102	* @param pResetOnLinux Whether or not to do real reset on linux.
103	*/
104	DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIROOTHUBPORT pInterface, bool fResetOnLinux));
105
106	/**
107	* Do transmit preparations.
108	*
109	* VUSB will call this upon submitting the URB request.
110	*
111	* @param pInterface Pointer to this structure.
112	* @param pUrb Pointer to the URB in question.
113	*/
114	DECLR3CALLBACKMEMBER(void, pfnXferPrepare,(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb));
115
116	/**
117	* Transfer completion callback routine.
118	*
119	* VUSB will call this when a transfer have been completed
120	* in a one or another way.
121	*
122	* @param pInterface Pointer to this structure.
123	* @param pUrb Pointer to the URB in question.
124	*/
125	DECLR3CALLBACKMEMBER(void, pfnXferCompletion,(PVUSBIROOTHUBPORT pInterface, PVUSBURB urb));
126
127	/**
128	* Handle transfer errors.
129	*
130	* VUSB calls this when a transfer attempt failed. This function will respond
131	* indicating wheter to retry or complete the URB with failure.
132	*
133	* @returns Retry indicator.
134	* @param pInterface Pointer to this structure.
135	* @param pUrb Pointer to the URB in question.
136	*/
137	DECLR3CALLBACKMEMBER(bool, pfnXferError,(PVUSBIROOTHUBPORT pInterface, PVUSBURB pUrb));
138
139	} VUSBIROOTHUBPORT;
140
141
142	/** Pointer to a VUSB RootHub connector interface. */
143	typedef struct VUSBIROOTHUBCONNECTOR *PVUSBIROOTHUBCONNECTOR;
144
145	/**
146	* The VUSB RootHub connector interface provided by the VBox USB RootHub driver.
147	*/
148	typedef struct VUSBIROOTHUBCONNECTOR
149	{
150	/**
151	* Allocates a new URB for a transfer.
152	*
153	* Either submit using pfnSubmitUrb or free using VUSBUrbFree().
154	*
155	* @returns Pointer to a new URB.
156	* @returns NULL on failure - try again later.
157	* This will not fail if the device wasn't found. We'll fail it
158	* at submit time, since that makes the usage of this api simpler.
159	* @param pInterface Pointer to this struct.
160	* @param DstAddress The destination address of the URB.
161	* @param cbData The amount of data space required.
162	* @param cTds The amount of TD space.
163	*/
164	DECLR3CALLBACKMEMBER(PVUSBURB, pfnNewUrb,(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, uint32_t cbData, uint32_t cTds));
165
166	/**
167	* Submits a URB for transfer.
168	* The transfer will do asynchronously if possible.
169	*
170	* @returns VBox status code.
171	* @param pInterface Pointer to this struct.
172	* @param pUrb Pointer to the URB returned by pfnNewUrb.
173	* The URB will be freed in case of failure.
174	*/
175	DECLR3CALLBACKMEMBER(int, pfnSubmitUrb,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb));
176
177	/**
178	* Call to service asynchronous URB completions in a polling fashion.
179	*
180	* Reaped URBs will be finished by calling the completion callback,
181	* thus there is no return code or input or anything from this function
182	* except for potential state changes elsewhere.
183	*
184	* @returns VINF_SUCCESS if no URBs are pending upon return.
185	* @returns VERR_TIMEOUT if one or more URBs are still in flight upon returning.
186	* @returns Other VBox status code.
187	*
188	* @param pInterface Pointer to this struct.
189	* @param cMillies Number of milliseconds to poll for completion.
190	*/
191	DECLR3CALLBACKMEMBER(void, pfnReapAsyncUrbs,(PVUSBIROOTHUBCONNECTOR pInterface, unsigned cMillies));
192
193	/**
194	* Cancels and completes - with CRC failure - all in-flight async URBs.
195	* This is typically done before saving a state.
196	*
197	* @param pInterface Pointer to this struct.
198	*/
199	DECLR3CALLBACKMEMBER(void, pfnCancelAllUrbs,(PVUSBIROOTHUBCONNECTOR pInterface));
200
201	/**
202	* Attach the device to the root hub.
203	* The device must not be attached to any hub for this call to succeed.
204	*
205	* @returns VBox status code.
206	* @param pInterface Pointer to this struct.
207	* @param pDevice Pointer to the device (interface) attach.
208	*/
209	DECLR3CALLBACKMEMBER(int, pfnAttachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice));
210
211	/**
212	* Detach the device from the root hub.
213	* The device must already be attached for this call to succeed.
214	*
215	* @returns VBox status code.
216	* @param pInterface Pointer to this struct.
217	* @param pDevice Pointer to the device (interface) to detach.
218	*/
219	DECLR3CALLBACKMEMBER(int, pfnDetachDevice,(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice));
220
221	} VUSBIROOTHUBCONNECTOR;
222
223
224	#ifdef IN_RING3
225	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnNewUrb */
226	DECLINLINE(PVUSBURB) VUSBIRhNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t DstAddress, uint32_t cbData, uint32_t cTds)
227	{
228	return pInterface->pfnNewUrb(pInterface, DstAddress, cbData, cTds);
229	}
230
231	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnSubmitUrb */
232	DECLINLINE(int) VUSBIRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb)
233	{
234	return pInterface->pfnSubmitUrb(pInterface, pUrb);
235	}
236
237	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnReapAsyncUrbs */
238	DECLINLINE(void) VUSBIRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, unsigned cMillies)
239	{
240	pInterface->pfnReapAsyncUrbs(pInterface, cMillies);
241	}
242
243	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnCancelAllUrbs */
244	DECLINLINE(void) VUSBIRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface)
245	{
246	pInterface->pfnCancelAllUrbs(pInterface);
247	}
248
249	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnAttachDevice */
250	DECLINLINE(int) VUSBIRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
251	{
252	return pInterface->pfnAttachDevice(pInterface, pDevice);
253	}
254
255	/** @copydoc VUSBIROOTHUBCONNECTOR::pfnDetachDevice */
256	DECLINLINE(int) VUSBIRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
257	{
258	return pInterface->pfnDetachDevice(pInterface, pDevice);
259	}
260	#endif /* IN_RING3 */
261
262
263
264	/** Pointer to a Root Hub Configuration Interface. */
265	typedef struct VUSBIRHCONFIG *PVUSBIRHCONFIG;
266
267	/**
268	* Root Hub Configuration Interface (intended for MAIN).
269	*/
270	typedef struct VUSBIRHCONFIG
271	{
272	/**
273	* Creates a USB proxy device and attaches it to the root hub.
274	*
275	* @returns VBox status code.
276	* @param pInterface Pointer to the root hub configuration interface structure.
277	* @param pUuid Pointer to the UUID for the new device.
278	* @param fRemote Whether the device must use the VRDP backend.
279	* @param pszAddress OS specific device address.
280	* @param pvBackend An opaque pointer for the backend. Only used by
281	* the VRDP backend so far.
282	*/
283	DECLR3CALLBACKMEMBER(int, pfnCreateProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char pszAddress, void pvBackend));
284
285	/**
286	* Removes a USB proxy device from the root hub and destroys it.
287	*
288	* @returns VBox status code.
289	* @param pInterface Pointer to the root hub configuration interface structure.
290	* @param pUuid Pointer to the UUID for the device.
291	*/
292	DECLR3CALLBACKMEMBER(int, pfnDestroyProxyDevice,(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid));
293
294	} VUSBIRHCONFIG;
295
296	#ifdef IN_RING3
297	/** @copydoc VUSBIRHCONFIG::pfnCreateProxyDevice */
298	DECLINLINE(int) VUSBIRhCreateProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid, bool fRemote, const char pszAddress, void pvBackend)
299	{
300	return pInterface->pfnCreateProxyDevice(pInterface, pUuid, fRemote, pszAddress, pvBackend);
301	}
302
303	/** @copydoc VUSBIRHCONFIG::pfnDestroyProxyDevice */
304	DECLINLINE(int) VUSBIRhDestroyProxyDevice(PVUSBIRHCONFIG pInterface, PCRTUUID pUuid)
305	{
306	return pInterface->pfnDestroyProxyDevice(pInterface, pUuid);
307	}
308	#endif /* IN_RING3 */
309
310
311
312	/**
313	* VUSB device reset completion callback function.
314	* This is called by the reset thread when the reset has been completed.
315	*
316	* @param pDev Pointer to the virtual USB device core.
317	* @param rc The VBox status code of the reset operation.
318	* @param pvUser User specific argument.
319	*
320	* @thread The reset thread or EMT.
321	*/
322	typedef DECLCALLBACK(void) FNVUSBRESETDONE(PVUSBIDEVICE pDevice, int rc, void *pvUser);
323	/** Pointer to a device reset completion callback function (FNUSBRESETDONE). */
324	typedef FNVUSBRESETDONE *PFNVUSBRESETDONE;
325
326	/**
327	* The state of a VUSB Device.
328	*
329	* @remark The order of these states is vital.
330	*/
331	typedef enum VUSBDEVICESTATE
332	{
333	VUSB_DEVICE_STATE_INVALID = 0,
334	VUSB_DEVICE_STATE_DETACHED,
335	VUSB_DEVICE_STATE_ATTACHED,
336	VUSB_DEVICE_STATE_POWERED,
337	VUSB_DEVICE_STATE_DEFAULT,
338	VUSB_DEVICE_STATE_ADDRESS,
339	VUSB_DEVICE_STATE_CONFIGURED,
340	VUSB_DEVICE_STATE_SUSPENDED,
341	/** The device is being reset. Don't mess with it.
342	* Next states: VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_RESET_DESTROY
343	*/
344	VUSB_DEVICE_STATE_RESET,
345	/** The device is being reset and should be destroyed. Don't mess with it.
346	* Prev state: VUSB_DEVICE_STATE_RESET
347	* Next state: VUSB_DEVICE_STATE_DESTROY
348	*/
349	VUSB_DEVICE_STATE_RESET_DESTROY,
350	/** The device is being destroyed.
351	* Prev state: Any but VUSB_DEVICE_STATE_RESET
352	* Next state: VUSB_DEVICE_STATE_DESTROYED
353	*/
354	VUSB_DEVICE_STATE_DESTROY,
355	/** The device has been destroy. */
356	VUSB_DEVICE_STATE_DESTROYED,
357	/** The usual 32-bit hack. */
358	VUSB_DEVICE_STATE_32BIT_HACK = 0x7fffffff
359	} VUSBDEVICESTATE;
360
361
362	/**
363	* USB Device Interface.
364	*/
365	typedef struct VUSBIDEVICE
366	{
367	/**
368	* Resets the device.
369	*
370	* Since a device reset shall take at least 10ms from the guest point of view,
371	* it must be performed asynchronously. We create a thread which performs this
372	* operation and ensures it will take at least 10ms.
373	*
374	* At times - like init - a synchronous reset is required, this can be done
375	* by passing NULL for pfnDone.
376	*
377	* -- internal stuff, move it --
378	* While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state.
379	* On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful,
380	* or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed.
381	* -- internal stuff, move it --
382	*
383	* @returns VBox status code.
384	* @param pInterface Pointer to this structure.
385	* @param fResetOnLinux Set if we can permit a real reset and a potential logical
386	* device reconnect on linux hosts.
387	* @param pfnDone Pointer to the completion routine. If NULL a synchronous
388	* reset is preformed not respecting the 10ms.
389	* @param pvUser User argument to the completion routine.
390	* @param pVM Pointer to the VM handle if callback in EMT is required. (optional)
391	*/
392	DECLR3CALLBACKMEMBER(int, pfnReset,(PVUSBIDEVICE pInterface, bool fResetOnLinux,
393	PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM));
394
395	/**
396	* Powers on the device.
397	*
398	* @returns VBox status code.
399	* @param pInterface Pointer to the device interface structure.
400	*/
401	DECLR3CALLBACKMEMBER(int, pfnPowerOn,(PVUSBIDEVICE pInterface));
402
403	/**
404	* Powers off the device.
405	*
406	* @returns VBox status code.
407	* @param pInterface Pointer to the device interface structure.
408	*/
409	DECLR3CALLBACKMEMBER(int, pfnPowerOff,(PVUSBIDEVICE pInterface));
410
411	/**
412	* Get the state of the device.
413	*
414	* @returns Device state.
415	* @param pInterface Pointer to the device interface structure.
416	*/
417	DECLR3CALLBACKMEMBER(VUSBDEVICESTATE, pfnGetState,(PVUSBIDEVICE pInterface));
418
419	} VUSBIDEVICE;
420
421
422	#ifdef IN_RING3
423	/**
424	* Resets the device.
425	*
426	* Since a device reset shall take at least 10ms from the guest point of view,
427	* it must be performed asynchronously. We create a thread which performs this
428	* operation and ensures it will take at least 10ms.
429	*
430	* At times - like init - a synchronous reset is required, this can be done
431	* by passing NULL for pfnDone.
432	*
433	* -- internal stuff, move it --
434	* While the device is being reset it is in the VUSB_DEVICE_STATE_RESET state.
435	* On completion it will be in the VUSB_DEVICE_STATE_DEFAULT state if successful,
436	* or in the VUSB_DEVICE_STATE_DETACHED state if the rest failed.
437	* -- internal stuff, move it --
438	*
439	* @returns VBox status code.
440	* @param pInterface Pointer to the device interface structure.
441	* @param fResetOnLinux Set if we can permit a real reset and a potential logical
442	* device reconnect on linux hosts.
443	* @param pfnDone Pointer to the completion routine. If NULL a synchronous
444	* reset is preformed not respecting the 10ms.
445	* @param pvUser User argument to the completion routine.
446	* @param pVM Pointer to the VM handle if callback in EMT is required. (optional)
447	*/
448	DECLINLINE(int) VUSBIDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM)
449	{
450	return pInterface->pfnReset(pInterface, fResetOnLinux, pfnDone, pvUser, pVM);
451	}
452
453	/**
454	* Powers on the device.
455	*
456	* @returns VBox status code.
457	* @param pInterface Pointer to the device interface structure.
458	*/
459	DECLINLINE(int) VUSBIDevPowerOn(PVUSBIDEVICE pInterface)
460	{
461	return pInterface->pfnPowerOn(pInterface);
462	}
463
464	/**
465	* Powers off the device.
466	*
467	* @returns VBox status code.
468	* @param pInterface Pointer to the device interface structure.
469	*/
470	DECLINLINE(int) VUSBIDevPowerOff(PVUSBIDEVICE pInterface)
471	{
472	return pInterface->pfnPowerOff(pInterface);
473	}
474
475	/**
476	* Get the state of the device.
477	*
478	* @returns Device state.
479	* @param pInterface Pointer to the device interface structure.
480	*/
481	DECLINLINE(VUSBDEVICESTATE) VUSBIDevGetState(PVUSBIDEVICE pInterface)
482	{
483	return pInterface->pfnGetState(pInterface);
484	}
485	#endif /* IN_RING3 */
486
487
488	/** @name URB
489	* @{ */
490
491	/**
492	* VUSB Transfer status codes.
493	*/
494	typedef enum VUSBSTATUS
495	{
496	/** Transer was ok. */
497	VUSBSTATUS_OK = 0,
498	#define VUSB_XFER_OK VUSBSTATUS_OK
499	/** Transfer stalled, endpoint halted. */
500	VUSBSTATUS_STALL,
501	#define VUSB_XFER_STALL VUSBSTATUS_STALL
502	/** Device not responding. */
503	VUSBSTATUS_DNR,
504	#define VUSB_XFER_DNR VUSBSTATUS_DNR
505	/** CRC error. */
506	VUSBSTATUS_CRC,
507	#define VUSB_XFER_CRC VUSBSTATUS_CRC
508	/** Underflow error. */
509	VUSBSTATUS_UNDERFLOW,
510	/** The isochronous buffer hasn't been touched. */
511	VUSBSTATUS_NOT_ACCESSED,
512	/** Invalid status. */
513	VUSBSTATUS_INVALID = 0x7f
514	} VUSBSTATUS;
515
516
517	/**
518	* VUSB Transfer types.
519	*/
520	typedef enum VUSBXFERTYPE
521	{
522	/** Control message. Used to represent a single control transfer. */
523	VUSBXFERTYPE_CTRL = 0,
524	#define VUSB_TRANSFER_TYPE_CTRL VUSBXFERTYPE_CTRL
525	/* Isochronous transfer. */
526	VUSBXFERTYPE_ISOC,
527	#define VUSB_TRANSFER_TYPE_ISOC VUSBXFERTYPE_ISOC
528	/** Bulk transfer. */
529	VUSBXFERTYPE_BULK,
530	#define VUSB_TRANSFER_TYPE_BULK VUSBXFERTYPE_BULK
531	/** Interrupt transfer. */
532	VUSBXFERTYPE_INTR,
533	#define VUSB_TRANSFER_TYPE_INTR VUSBXFERTYPE_INTR
534	/** Complete control message. Used to represent an entire control message. */
535	VUSBXFERTYPE_MSG,
536	#define VUSB_TRANSFER_TYPE_MSG VUSBXFERTYPE_MSG
537	/** Invalid transfer type. */
538	VUSBXFERTYPE_INVALID = 0x7f
539	} VUSBXFERTYPE;
540
541
542	/**
543	* VUSB transfer direction.
544	*/
545	typedef enum VUSBDIRECTION
546	{
547	/** Setup */
548	VUSBDIRECTION_SETUP = 0,
549	#define VUSB_DIRECTION_SETUP VUSBDIRECTION_SETUP
550	/** In - Device to host. */
551	VUSBDIRECTION_IN = 1,
552	#define VUSB_DIRECTION_IN VUSBDIRECTION_IN
553	/** Out - Host to device. */
554	VUSBDIRECTION_OUT = 2,
555	#define VUSB_DIRECTION_OUT VUSBDIRECTION_OUT
556	/** Invalid direction */
557	VUSBDIRECTION_INVALID = 0x7f
558	} VUSBDIRECTION;
559
560	/**
561	* The URB states
562	*/
563	typedef enum VUSBURBSTATE
564	{
565	/** The usual invalid state. */
566	VUSBURBSTATE_INVALID = 0,
567	/** The URB is free, i.e. not in use.
568	* Next state: ALLOCATED */
569	VUSBURBSTATE_FREE,
570	/** The URB is allocated, i.e. being prepared for submission.
571	* Next state: FREE, IN_FLIGHT */
572	VUSBURBSTATE_ALLOCATED,
573	/** The URB is in flight.
574	* Next state: REAPED, CANCELLED */
575	VUSBURBSTATE_IN_FLIGHT,
576	/** The URB has been reaped and is being completed.
577	* Next state: FREE */
578	VUSBURBSTATE_REAPED,
579	/** The URB has been cancelled and is awaiting reaping and immediate freeing.
580	* Next state: FREE */
581	VUSBURBSTATE_CANCELLED,
582	/** The end of the valid states (exclusive). */
583	VUSBURBSTATE_END,
584	/** The usual 32-bit blow up. */
585	VUSBURBSTATE_32BIT_HACK = 0x7fffffff
586	} VUSBURBSTATE;
587
588
589	/**
590	* Information about a isochronous packet.
591	*/
592	typedef struct VUSBURBISOCPKT
593	{
594	/** The size of the packet.
595	* IN: The packet size. I.e. the number of bytes to the next packet or end of buffer.
596	* OUT: The actual size transfered. */
597	uint16_t cb;
598	/** The offset of the packet. (Relative to VUSBURB::abData[0].)
599	* OUT: This can be changed by the USB device if it does some kind of buffer squeezing. */
600	uint16_t off;
601	/** The status of the transfer.
602	* IN: VUSBSTATUS_INVALID
603	* OUT: VUSBSTATUS_INVALID if nothing was done, otherwise the correct status. */
604	VUSBSTATUS enmStatus;
605	} VUSBURBISOCPKT;
606	/** Pointer to a isochronous packet. */
607	typedef VUSBURBISOCPKT *PVUSBURBISOCPTK;
608	/** Pointer to a const isochronous packet. */
609	typedef const VUSBURBISOCPKT *PCVUSBURBISOCPKT;
610
611	/**
612	* Asynchronous USB request descriptor
613	*/
614	typedef struct vusb_urb
615	{
616	/** URB magic value. */
617	uint32_t u32Magic;
618	/** The USR state. */
619	VUSBURBSTATE enmState;
620
621	/** The VUSB data. */
622	struct VUSBURBVUSB
623	{
624	/** URB chain pointer. */
625	PVUSBURB pNext;
626	/** URB chain pointer. */
627	PVUSBURB *ppPrev;
628	/** Pointer to the original for control messages. */
629	PVUSBURB pCtrlUrb;
630	/** Sepcific to the pfnFree function. */
631	void *pvFreeCtx;
632	/**
633	* Callback which will free the URB once it's reaped and completed.
634	* @param pUrb The URB.
635	*/
636	DECLCALLBACKMEMBER(void, pfnFree)(PVUSBURB pUrb);
637	/** Submit timestamp. (logging only) */
638	uint64_t u64SubmitTS;
639	/** The allocated data length. */
640	uint32_t cbDataAllocated;
641	/** The allocated TD length. */
642	uint32_t cTdsAllocated;
643	} VUsb;
644
645	/** The host controller data. */
646	struct VUSBURBHCI
647	{
648	/** The endpoint descriptor address. */
649	uint32_t EdAddr;
650	/** Number of Tds in the array. */
651	uint32_t cTds;
652	/** Pointer to an array of TD info items.*/
653	struct VUSBURBHCITD
654	{
655	/** The address of the */
656	uint32_t TdAddr;
657	/** A copy of the TD. */
658	uint32_t TdCopy[8];
659	} *paTds;
660	/** URB chain pointer. */
661	PVUSBURB pNext;
662	/** When this URB was created.
663	* (Used for isochronous frames and for logging.) */
664	uint32_t u32FrameNo;
665	/** Flag indicating that the TDs have been unlinked. */
666	bool fUnlinked;
667	} Hci;
668
669	/** The device data. */
670	struct VUSBURBDEV
671	{
672	/** Pointer to the proxy URB. */
673	void *pvProxyUrb;
674	} Dev;
675
676	/** The device - can be NULL untill submit is attempted.
677	* This is set when allocating the URB. */
678	struct vusb_dev *pDev;
679	/** The device address.
680	* This is set at allocation time. */
681	uint8_t DstAddress;
682
683	/** The endpoint.
684	* IN: Must be set before submitting the URB. */
685	uint8_t EndPt;
686	/** The transfer type.
687	* IN: Must be set before submitting the URB. */
688	VUSBXFERTYPE enmType;
689	/** The transfer direction.
690	* IN: Must be set before submitting the URB. */
691	VUSBDIRECTION enmDir;
692	/** Indicates whether it is OK to receive/send less data than requested.
693	* IN: Must be initialized before submitting the URB. */
694	bool fShortNotOk;
695	/** The transfer status.
696	* OUT: This is set when reaping the URB. */
697	VUSBSTATUS enmStatus;
698
699	/** The number of isochronous packets describe in aIsocPkts.
700	* This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */
701	uint32_t cIsocPkts;
702	/** The iso packets within abData.
703	* This is ignored when enmType isn't VUSBXFERTYPE_ISOC. */
704	VUSBURBISOCPKT aIsocPkts[8];
705
706	/** The message length.
707	* IN: The amount of data to send / receive - set at allocation time.
708	* OUT: The amount of data sent / received. */
709	uint32_t cbData;
710	/** The message data.
711	* IN: On host to device transfers, the data to send.
712	* OUT: On device to host transfers, the data to received. */
713	uint8_t abData[8*_1K];
714	} VUSBURB;
715
716	/** The magic value of a valid VUSBURB. (Murakami Haruki) */
717	#define VUSBURB_MAGIC 0x19490112
718
719	/** @} */
720
721
722	/** @} */
723
724	__END_DECLS
725
726	#endif

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/VBox/vusb.h@ 666

Download in other formats: