err.h@ 32599

Last change on this file since 32599 was 32599, checked in by vboxsync, 14 years ago
Runtime: fixed todos; distinct between real VERR_EOF and tar end of file; Use bigger buffers (_1M) for data reading and writing.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 48.5 KB

Line
1	/** @file
2	* IPRT - Status Codes.
3	*/
4
5	/*
6	* Copyright (C) 2006-2009 Oracle Corporation
7	*
8	* This file is part of VirtualBox Open Source Edition (OSE), as
9	* available from http://www.virtualbox.org. This file is free software;
10	* you can redistribute it and/or modify it under the terms of the GNU
11	* General Public License (GPL) as published by the Free Software
12	* Foundation, in version 2 as it comes in the "COPYING" file of the
13	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	*
16	* The contents of this file may alternatively be used under the terms
17	* of the Common Development and Distribution License Version 1.0
18	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
19	* VirtualBox OSE distribution, in which case the provisions of the
20	* CDDL are applicable instead of those of the GPL.
21	*
22	* You may elect to license modified versions of this file under the
23	* terms and conditions of either the GPL or the CDDL or both.
24	*/
25
26	#ifndef ___iprt_err_h
27	#define ___iprt_err_h
28
29	#include <iprt/cdefs.h>
30	#include <iprt/types.h>
31
32	RT_C_DECLS_BEGIN
33
34	/** @defgroup grp_rt_err RTErr - Status Codes
35	* @ingroup grp_rt
36	* @{
37	*/
38
39	/** @defgroup grp_rt_err_hlp Status Code Helpers
40	* @ingroup grp_rt_err
41	* @{
42	*/
43
44	#ifdef __cplusplus
45	/**
46	* Strict type validation class.
47	*
48	* This is only really useful for type checking the arguments to RT_SUCCESS,
49	* RT_SUCCESS_NP, RT_FAILURE and RT_FAILURE_NP. The RTErrStrictType2
50	* constructor is for integration with external status code strictness regimes.
51	*/
52	class RTErrStrictType
53	{
54	protected:
55	int32_t m_rc;
56
57	public:
58	/**
59	* Constructor for interaction with external status code strictness regimes.
60	*
61	* This is a special constructor for helping external return code validator
62	* classes interact cleanly with RT_SUCCESS, RT_SUCCESS_NP, RT_FAILURE and
63	* RT_FAILURE_NP while barring automatic cast to integer.
64	*
65	* @param rcObj IPRT status code object from an automatic cast.
66	*/
67	RTErrStrictType(RTErrStrictType2 const rcObj)
68	: m_rc(rcObj.getValue())
69	{
70	}
71
72	/**
73	* Integer constructor used by RT_SUCCESS_NP.
74	*
75	* @param rc IPRT style status code.
76	*/
77	RTErrStrictType(int32_t rc)
78	: m_rc(rc)
79	{
80	}
81
82	#if 0 /** @todo figure where int32_t is long instead of int. */
83	/**
84	* Integer constructor used by RT_SUCCESS_NP.
85	*
86	* @param rc IPRT style status code.
87	*/
88	RTErrStrictType(signed int rc)
89	: m_rc(rc)
90	{
91	}
92	#endif
93
94	/**
95	* Test for success.
96	*/
97	bool success() const
98	{
99	return m_rc >= 0;
100	}
101
102	private:
103	/** @name Try ban a number of wrong types.
104	* @{ */
105	RTErrStrictType(uint8_t rc) : m_rc(-999) { NOREF(rc); }
106	RTErrStrictType(uint16_t rc) : m_rc(-999) { NOREF(rc); }
107	RTErrStrictType(uint32_t rc) : m_rc(-999) { NOREF(rc); }
108	RTErrStrictType(uint64_t rc) : m_rc(-999) { NOREF(rc); }
109	RTErrStrictType(int8_t rc) : m_rc(-999) { NOREF(rc); }
110	RTErrStrictType(int16_t rc) : m_rc(-999) { NOREF(rc); }
111	RTErrStrictType(int64_t rc) : m_rc(-999) { NOREF(rc); }
112	/** @todo fight long here - clashes with int32_t/int64_t on some platforms. */
113	/** @} */
114	};
115	#endif /* __cplusplus */
116
117
118	/** @def RTERR_STRICT_RC
119	* Indicates that RT_SUCCESS_NP, RT_SUCCESS, RT_FAILURE_NP and RT_FAILURE should
120	* make type enforcing at compile time.
121	*
122	* @remarks Only define this for C++ code.
123	*/
124	#if defined(__cplusplus) \
125	&& !defined(RTERR_STRICT_RC) \
126	&& ( defined(DOXYGEN_RUNNING) \
127	\|\| defined(DEBUG) \
128	\|\| defined(RT_STRICT) )
129	# define RTERR_STRICT_RC 1
130	#endif
131
132
133	/** @def RT_SUCCESS
134	* Check for success. We expect success in normal cases, that is the code path depending on
135	* this check is normally taken. To prevent any prediction use RT_SUCCESS_NP instead.
136	*
137	* @returns true if rc indicates success.
138	* @returns false if rc indicates failure.
139	*
140	* @param rc The iprt status code to test.
141	*/
142	#define RT_SUCCESS(rc) ( RT_LIKELY(RT_SUCCESS_NP(rc)) )
143
144	/** @def RT_SUCCESS_NP
145	* Check for success. Don't predict the result.
146	*
147	* @returns true if rc indicates success.
148	* @returns false if rc indicates failure.
149	*
150	* @param rc The iprt status code to test.
151	*/
152	#ifdef RTERR_STRICT_RC
153	# define RT_SUCCESS_NP(rc) ( RTErrStrictType(rc).success() )
154	#else
155	# define RT_SUCCESS_NP(rc) ( (int)(rc) >= VINF_SUCCESS )
156	#endif
157
158	/** @def RT_FAILURE
159	* Check for failure. We don't expect in normal cases, that is the code path depending on
160	* this check is normally NOT taken. To prevent any prediction use RT_FAILURE_NP instead.
161	*
162	* @returns true if rc indicates failure.
163	* @returns false if rc indicates success.
164	*
165	* @param rc The iprt status code to test.
166	*/
167	#define RT_FAILURE(rc) ( RT_UNLIKELY(!RT_SUCCESS_NP(rc)) )
168
169	/** @def RT_FAILURE_NP
170	* Check for failure. Don't predict the result.
171	*
172	* @returns true if rc indicates failure.
173	* @returns false if rc indicates success.
174	*
175	* @param rc The iprt status code to test.
176	*/
177	#define RT_FAILURE_NP(rc) ( !RT_SUCCESS_NP(rc) )
178
179	/**
180	* Converts a Darwin HRESULT error to an iprt status code.
181	*
182	* @returns iprt status code.
183	* @param iNativeCode HRESULT error code.
184	* @remark Darwin ring-3 only.
185	*/
186	RTDECL(int) RTErrConvertFromDarwinCOM(int32_t iNativeCode);
187
188	/**
189	* Converts a Darwin IOReturn error to an iprt status code.
190	*
191	* @returns iprt status code.
192	* @param iNativeCode IOReturn error code.
193	* @remark Darwin only.
194	*/
195	RTDECL(int) RTErrConvertFromDarwinIO(int iNativeCode);
196
197	/**
198	* Converts a Darwin kern_return_t error to an iprt status code.
199	*
200	* @returns iprt status code.
201	* @param iNativeCode kern_return_t error code.
202	* @remark Darwin only.
203	*/
204	RTDECL(int) RTErrConvertFromDarwinKern(int iNativeCode);
205
206	/**
207	* Converts a Darwin error to an iprt status code.
208	*
209	* This will consult RTErrConvertFromDarwinKern, RTErrConvertFromDarwinIO
210	* and RTErrConvertFromDarwinCOM in this order. The latter is ring-3 only as it
211	* doesn't apply elsewhere.
212	*
213	* @returns iprt status code.
214	* @param iNativeCode Darwin error code.
215	* @remarks Darwin only.
216	* @remarks This is recommended over RTErrConvertFromDarwinKern and RTErrConvertFromDarwinIO
217	* since these are really just subsets of the same error space.
218	*/
219	RTDECL(int) RTErrConvertFromDarwin(int iNativeCode);
220
221	/**
222	* Converts errno to iprt status code.
223	*
224	* @returns iprt status code.
225	* @param uNativeCode errno code.
226	*/
227	RTDECL(int) RTErrConvertFromErrno(unsigned uNativeCode);
228
229	/**
230	* Converts a L4 errno to a iprt status code.
231	*
232	* @returns iprt status code.
233	* @param uNativeCode l4 errno.
234	* @remark L4 only.
235	*/
236	RTDECL(int) RTErrConvertFromL4Errno(unsigned uNativeCode);
237
238	/**
239	* Converts NT status code to iprt status code.
240	*
241	* Needless to say, this is only available on NT and winXX targets.
242	*
243	* @returns iprt status code.
244	* @param lNativeCode NT status code.
245	* @remark Windows only.
246	*/
247	RTDECL(int) RTErrConvertFromNtStatus(long lNativeCode);
248
249	/**
250	* Converts OS/2 error code to iprt status code.
251	*
252	* @returns iprt status code.
253	* @param uNativeCode OS/2 error code.
254	* @remark OS/2 only.
255	*/
256	RTDECL(int) RTErrConvertFromOS2(unsigned uNativeCode);
257
258	/**
259	* Converts Win32 error code to iprt status code.
260	*
261	* @returns iprt status code.
262	* @param uNativeCode Win32 error code.
263	* @remark Windows only.
264	*/
265	RTDECL(int) RTErrConvertFromWin32(unsigned uNativeCode);
266
267	/**
268	* Converts an iprt status code to a errno status code.
269	*
270	* @returns errno status code.
271	* @param iErr iprt status code.
272	*/
273	RTDECL(int) RTErrConvertToErrno(int iErr);
274
275
276	#ifdef IN_RING3
277
278	/**
279	* iprt status code message.
280	*/
281	typedef struct RTSTATUSMSG
282	{
283	/** Pointer to the short message string. */
284	const char *pszMsgShort;
285	/** Pointer to the full message string. */
286	const char *pszMsgFull;
287	/** Pointer to the define string. */
288	const char *pszDefine;
289	/** Status code number. */
290	int iCode;
291	} RTSTATUSMSG;
292	/** Pointer to iprt status code message. */
293	typedef RTSTATUSMSG *PRTSTATUSMSG;
294	/** Pointer to const iprt status code message. */
295	typedef const RTSTATUSMSG *PCRTSTATUSMSG;
296
297	/**
298	* Get the message structure corresponding to a given iprt status code.
299	*
300	* @returns Pointer to read-only message description.
301	* @param rc The status code.
302	*/
303	RTDECL(PCRTSTATUSMSG) RTErrGet(int rc);
304
305	/**
306	* Get the define corresponding to a given iprt status code.
307	*
308	* @returns Pointer to read-only string with the \#define identifier.
309	* @param rc The status code.
310	*/
311	#define RTErrGetDefine(rc) (RTErrGet(rc)->pszDefine)
312
313	/**
314	* Get the short description corresponding to a given iprt status code.
315	*
316	* @returns Pointer to read-only string with the description.
317	* @param rc The status code.
318	*/
319	#define RTErrGetShort(rc) (RTErrGet(rc)->pszMsgShort)
320
321	/**
322	* Get the full description corresponding to a given iprt status code.
323	*
324	* @returns Pointer to read-only string with the description.
325	* @param rc The status code.
326	*/
327	#define RTErrGetFull(rc) (RTErrGet(rc)->pszMsgFull)
328
329	#ifdef RT_OS_WINDOWS
330	/**
331	* Windows error code message.
332	*/
333	typedef struct RTWINERRMSG
334	{
335	/** Pointer to the full message string. */
336	const char *pszMsgFull;
337	/** Pointer to the define string. */
338	const char *pszDefine;
339	/** Error code number. */
340	long iCode;
341	} RTWINERRMSG;
342	/** Pointer to Windows error code message. */
343	typedef RTWINERRMSG *PRTWINERRMSG;
344	/** Pointer to const Windows error code message. */
345	typedef const RTWINERRMSG *PCRTWINERRMSG;
346
347	/**
348	* Get the message structure corresponding to a given Windows error code.
349	*
350	* @returns Pointer to read-only message description.
351	* @param rc The status code.
352	*/
353	RTDECL(PCRTWINERRMSG) RTErrWinGet(long rc);
354
355	/** On windows COM errors are part of the Windows error database. */
356	typedef RTWINERRMSG RTCOMERRMSG;
357
358	#else /* !RT_OS_WINDOWS */
359
360	/**
361	* COM/XPCOM error code message.
362	*/
363	typedef struct RTCOMERRMSG
364	{
365	/** Pointer to the full message string. */
366	const char *pszMsgFull;
367	/** Pointer to the define string. */
368	const char *pszDefine;
369	/** Error code number. */
370	uint32_t iCode;
371	} RTCOMERRMSG;
372	#endif /* !RT_OS_WINDOWS */
373	/** Pointer to a XPCOM/COM error code message. */
374	typedef RTCOMERRMSG *PRTCOMERRMSG;
375	/** Pointer to const a XPCOM/COM error code message. */
376	typedef const RTCOMERRMSG *PCRTCOMERRMSG;
377
378	/**
379	* Get the message structure corresponding to a given COM/XPCOM error code.
380	*
381	* @returns Pointer to read-only message description.
382	* @param rc The status code.
383	*/
384	RTDECL(PCRTCOMERRMSG) RTErrCOMGet(uint32_t rc);
385
386	#endif /* IN_RING3 */
387
388	/** @} */
389
390
391	/* SED-START */
392
393	/** @name Misc. Status Codes
394	* @{
395	*/
396	/** Success. */
397	#define VINF_SUCCESS 0
398
399	/** General failure - DON'T USE THIS!!! */
400	#define VERR_GENERAL_FAILURE (-1)
401	/** Invalid parameter. */
402	#define VERR_INVALID_PARAMETER (-2)
403	/** Invalid parameter. */
404	#define VWRN_INVALID_PARAMETER 2
405	/** Invalid magic or cookie. */
406	#define VERR_INVALID_MAGIC (-3)
407	/** Invalid magic or cookie. */
408	#define VWRN_INVALID_MAGIC 3
409	/** Invalid loader handle. */
410	#define VERR_INVALID_HANDLE (-4)
411	/** Invalid loader handle. */
412	#define VWRN_INVALID_HANDLE 4
413	/** Failed to lock the address range. */
414	#define VERR_LOCK_FAILED (-5)
415	/** Invalid memory pointer. */
416	#define VERR_INVALID_POINTER (-6)
417	/** Failed to patch the IDT. */
418	#define VERR_IDT_FAILED (-7)
419	/** Memory allocation failed. */
420	#define VERR_NO_MEMORY (-8)
421	/** Already loaded. */
422	#define VERR_ALREADY_LOADED (-9)
423	/** Permission denied. */
424	#define VERR_PERMISSION_DENIED (-10)
425	/** Permission denied. */
426	#define VINF_PERMISSION_DENIED 10
427	/** Version mismatch. */
428	#define VERR_VERSION_MISMATCH (-11)
429	/** The request function is not implemented. */
430	#define VERR_NOT_IMPLEMENTED (-12)
431
432	/** Failed to allocate temporary memory. */
433	#define VERR_NO_TMP_MEMORY (-20)
434	/** Invalid file mode mask (RTFMODE). */
435	#define VERR_INVALID_FMODE (-21)
436	/** Incorrect call order. */
437	#define VERR_WRONG_ORDER (-22)
438	/** There is no TLS (thread local storage) available for storing the current thread. */
439	#define VERR_NO_TLS_FOR_SELF (-23)
440	/** Failed to set the TLS (thread local storage) entry which points to our thread structure. */
441	#define VERR_FAILED_TO_SET_SELF_TLS (-24)
442	/** Not able to allocate contiguous memory. */
443	#define VERR_NO_CONT_MEMORY (-26)
444	/** No memory available for page table or page directory. */
445	#define VERR_NO_PAGE_MEMORY (-27)
446	/** Already initialized. */
447	#define VINF_ALREADY_INITIALIZED 28
448	/** The specified thread is dead. */
449	#define VERR_THREAD_IS_DEAD (-29)
450	/** The specified thread is not waitable. */
451	#define VERR_THREAD_NOT_WAITABLE (-30)
452	/** Pagetable not present. */
453	#define VERR_PAGE_TABLE_NOT_PRESENT (-31)
454	/** Invalid context.
455	* Typically an API was used by the wrong thread. */
456	#define VERR_INVALID_CONTEXT (-32)
457	/** The per process timer is busy. */
458	#define VERR_TIMER_BUSY (-33)
459	/** Address conflict. */
460	#define VERR_ADDRESS_CONFLICT (-34)
461	/** Unresolved (unknown) host platform error. */
462	#define VERR_UNRESOLVED_ERROR (-35)
463	/** Invalid function. */
464	#define VERR_INVALID_FUNCTION (-36)
465	/** Not supported. */
466	#define VERR_NOT_SUPPORTED (-37)
467	/** Access denied. */
468	#define VERR_ACCESS_DENIED (-38)
469	/** Call interrupted. */
470	#define VERR_INTERRUPTED (-39)
471	/** Call interrupted. */
472	#define VINF_INTERRUPTED 39
473	/** Timeout. */
474	#define VERR_TIMEOUT (-40)
475	/** Timeout. */
476	#define VINF_TIMEOUT 40
477	/** Buffer too small to save result. */
478	#define VERR_BUFFER_OVERFLOW (-41)
479	/** Buffer too small to save result. */
480	#define VINF_BUFFER_OVERFLOW 41
481	/** Data size overflow. */
482	#define VERR_TOO_MUCH_DATA (-42)
483	/** Max threads number reached. */
484	#define VERR_MAX_THRDS_REACHED (-43)
485	/** Max process number reached. */
486	#define VERR_MAX_PROCS_REACHED (-44)
487	/** The recipient process has refused the signal. */
488	#define VERR_SIGNAL_REFUSED (-45)
489	/** A signal is already pending. */
490	#define VERR_SIGNAL_PENDING (-46)
491	/** The signal being posted is not correct. */
492	#define VERR_SIGNAL_INVALID (-47)
493	/** The state changed.
494	* This is a generic error message and needs a context to make sense. */
495	#define VERR_STATE_CHANGED (-48)
496	/** Warning, the state changed.
497	* This is a generic error message and needs a context to make sense. */
498	#define VWRN_STATE_CHANGED 48
499	/** Error while parsing UUID string */
500	#define VERR_INVALID_UUID_FORMAT (-49)
501	/** The specified process was not found. */
502	#define VERR_PROCESS_NOT_FOUND (-50)
503	/** The process specified to a non-block wait had not exited. */
504	#define VERR_PROCESS_RUNNING (-51)
505	/** Retry the operation. */
506	#define VERR_TRY_AGAIN (-52)
507	/** Retry the operation. */
508	#define VINF_TRY_AGAIN 52
509	/** Generic parse error. */
510	#define VERR_PARSE_ERROR (-53)
511	/** Value out of range. */
512	#define VERR_OUT_OF_RANGE (-54)
513	/** A numeric conversion encountered a value which was too big for the target. */
514	#define VERR_NUMBER_TOO_BIG (-55)
515	/** A numeric conversion encountered a value which was too big for the target. */
516	#define VWRN_NUMBER_TOO_BIG 55
517	/** The number begin converted (string) contained no digits. */
518	#define VERR_NO_DIGITS (-56)
519	/** The number begin converted (string) contained no digits. */
520	#define VWRN_NO_DIGITS 56
521	/** Encountered a '-' during conversion to an unsigned value. */
522	#define VERR_NEGATIVE_UNSIGNED (-57)
523	/** Encountered a '-' during conversion to an unsigned value. */
524	#define VWRN_NEGATIVE_UNSIGNED 57
525	/** Error while characters translation (unicode and so). */
526	#define VERR_NO_TRANSLATION (-58)
527	/** Encountered unicode code point which is reserved for use as endian indicator (0xffff or 0xfffe). */
528	#define VERR_CODE_POINT_ENDIAN_INDICATOR (-59)
529	/** Encountered unicode code point in the surrogate range (0xd800 to 0xdfff). */
530	#define VERR_CODE_POINT_SURROGATE (-60)
531	/** A string claiming to be UTF-8 is incorrectly encoded. */
532	#define VERR_INVALID_UTF8_ENCODING (-61)
533	/** Ad string claiming to be in UTF-16 is incorrectly encoded. */
534	#define VERR_INVALID_UTF16_ENCODING (-62)
535	/** Encountered a unicode code point which cannot be represented as UTF-16. */
536	#define VERR_CANT_RECODE_AS_UTF16 (-63)
537	/** Got an out of memory condition trying to allocate a string. */
538	#define VERR_NO_STR_MEMORY (-64)
539	/** Got an out of memory condition trying to allocate a UTF-16 (/UCS-2) string. */
540	#define VERR_NO_UTF16_MEMORY (-65)
541	/** Get an out of memory condition trying to allocate a code point array. */
542	#define VERR_NO_CODE_POINT_MEMORY (-66)
543	/** Can't free the memory because it's used in mapping. */
544	#define VERR_MEMORY_BUSY (-67)
545	/** The timer can't be started because it's already active. */
546	#define VERR_TIMER_ACTIVE (-68)
547	/** The timer can't be stopped because i's already suspended. */
548	#define VERR_TIMER_SUSPENDED (-69)
549	/** The operation was cancelled by the user (copy) or another thread (local ipc). */
550	#define VERR_CANCELLED (-70)
551	/** Failed to initialize a memory object.
552	* Exactly what this means is OS specific. */
553	#define VERR_MEMOBJ_INIT_FAILED (-71)
554	/** Out of memory condition when allocating memory with low physical backing. */
555	#define VERR_NO_LOW_MEMORY (-72)
556	/** Out of memory condition when allocating physical memory (without mapping). */
557	#define VERR_NO_PHYS_MEMORY (-73)
558	/** The address (virtual or physical) is too big. */
559	#define VERR_ADDRESS_TOO_BIG (-74)
560	/** Failed to map a memory object. */
561	#define VERR_MAP_FAILED (-75)
562	/** Trailing characters. */
563	#define VERR_TRAILING_CHARS (-76)
564	/** Trailing characters. */
565	#define VWRN_TRAILING_CHARS 76
566	/** Trailing spaces. */
567	#define VERR_TRAILING_SPACES (-77)
568	/** Trailing spaces. */
569	#define VWRN_TRAILING_SPACES 77
570	/** Generic not found error. */
571	#define VERR_NOT_FOUND (-78)
572	/** Generic not found warning. */
573	#define VWRN_NOT_FOUND 78
574	/** Generic invalid state error. */
575	#define VERR_INVALID_STATE (-79)
576	/** Generic invalid state warning. */
577	#define VWRN_INVALID_STATE 79
578	/** Generic out of resources error. */
579	#define VERR_OUT_OF_RESOURCES (-80)
580	/** Generic out of resources warning. */
581	#define VWRN_OUT_OF_RESOURCES 80
582	/** No more handles available, too many open handles. */
583	#define VERR_NO_MORE_HANDLES (-81)
584	/** Preemption is disabled.
585	* The requested operation can only be performed when preemption is enabled. */
586	#define VERR_PREEMPT_DISABLED (-82)
587	/** End of string. */
588	#define VERR_END_OF_STRING (-83)
589	/** End of string. */
590	#define VINF_END_OF_STRING 83
591	/** A page count is out of range. */
592	#define VERR_PAGE_COUNT_OUT_OF_RANGE (-84)
593	/** Generic object destroyed status. */
594	#define VERR_OBJECT_DESTROYED (-85)
595	/** Generic object was destroyed by the call status. */
596	#define VINF_OBJECT_DESTROYED 85
597	/** Generic dangling objects status. */
598	#define VERR_DANGLING_OBJECTS (-86)
599	/** Generic dangling objects status. */
600	#define VWRN_DANGLING_OBJECTS 86
601	/** Invalid Base64 encoding. */
602	#define VERR_INVALID_BASE64_ENCODING (-87)
603	/** Return instigated by a callback or similar. */
604	#define VERR_CALLBACK_RETURN (-88)
605	/** Return instigated by a callback or similar. */
606	#define VINF_CALLBACK_RETURN 88
607	/** Authentication failure. */
608	#define VERR_AUTHENTICATION_FAILURE (-89)
609	/** Not a power of two. */
610	#define VERR_NOT_POWER_OF_TWO (-90)
611	/** Status code, typically given as a parameter, that isn't supposed to be used. */
612	#define VERR_IGNORED (-91)
613	/** Concurrent access to the object is not allowed. */
614	#define VERR_CONCURRENT_ACCESS (-92)
615	/** The caller does not have a reference to the object.
616	* This status is used when two threads is caught sharing the same object
617	* reference. */
618	#define VERR_CALLER_NO_REFERENCE (-93)
619	/** Generic no change error. */
620	#define VERR_NO_CHANGE (-95)
621	/** Generic no change info. */
622	#define VINF_NO_CHANGE 95
623	/** Out of memory condition when allocating executable memory. */
624	#define VERR_NO_EXEC_MEMORY (-96)
625
626	/** @} */
627
628
629	/** @name Common File/Disk/Pipe/etc Status Codes
630	* @{
631	*/
632	/** Unresolved (unknown) file i/o error. */
633	#define VERR_FILE_IO_ERROR (-100)
634	/** File/Device open failed. */
635	#define VERR_OPEN_FAILED (-101)
636	/** File not found. */
637	#define VERR_FILE_NOT_FOUND (-102)
638	/** Path not found. */
639	#define VERR_PATH_NOT_FOUND (-103)
640	/** Invalid (malformed) file/path name. */
641	#define VERR_INVALID_NAME (-104)
642	/** File/Device already exists. */
643	#define VERR_ALREADY_EXISTS (-105)
644	/** Too many open files. */
645	#define VERR_TOO_MANY_OPEN_FILES (-106)
646	/** Seek error. */
647	#define VERR_SEEK (-107)
648	/** Seek below file start. */
649	#define VERR_NEGATIVE_SEEK (-108)
650	/** Trying to seek on device. */
651	#define VERR_SEEK_ON_DEVICE (-109)
652	/** Reached the end of the file. */
653	#define VERR_EOF (-110)
654	/** Reached the end of the file. */
655	#define VINF_EOF 110
656	/** Generic file read error. */
657	#define VERR_READ_ERROR (-111)
658	/** Generic file write error. */
659	#define VERR_WRITE_ERROR (-112)
660	/** Write protect error. */
661	#define VERR_WRITE_PROTECT (-113)
662	/** Sharing violation, file is being used by another process. */
663	#define VERR_SHARING_VIOLATION (-114)
664	/** Unable to lock a region of a file. */
665	#define VERR_FILE_LOCK_FAILED (-115)
666	/** File access error, another process has locked a portion of the file. */
667	#define VERR_FILE_LOCK_VIOLATION (-116)
668	/** File or directory can't be created. */
669	#define VERR_CANT_CREATE (-117)
670	/** Directory can't be deleted. */
671	#define VERR_CANT_DELETE_DIRECTORY (-118)
672	/** Can't move file to another disk. */
673	#define VERR_NOT_SAME_DEVICE (-119)
674	/** The filename or extension is too long. */
675	#define VERR_FILENAME_TOO_LONG (-120)
676	/** Media not present in drive. */
677	#define VERR_MEDIA_NOT_PRESENT (-121)
678	/** The type of media was not recognized. Not formatted? */
679	#define VERR_MEDIA_NOT_RECOGNIZED (-122)
680	/** Can't unlock - region was not locked. */
681	#define VERR_FILE_NOT_LOCKED (-123)
682	/** Unrecoverable error: lock was lost. */
683	#define VERR_FILE_LOCK_LOST (-124)
684	/** Can't delete directory with files. */
685	#define VERR_DIR_NOT_EMPTY (-125)
686	/** A directory operation was attempted on a non-directory object. */
687	#define VERR_NOT_A_DIRECTORY (-126)
688	/** A non-directory operation was attempted on a directory object. */
689	#define VERR_IS_A_DIRECTORY (-127)
690	/** Tried to grow a file beyond the limit imposed by the process or the filesystem. */
691	#define VERR_FILE_TOO_BIG (-128)
692	/** No pending request the aio context has to wait for completion. */
693	#define VERR_FILE_AIO_NO_REQUEST (-129)
694	/** The request could not be canceled or prepared for another transfer
695	* because it is still in progress. */
696	#define VERR_FILE_AIO_IN_PROGRESS (-130)
697	/** The request could not be canceled because it already completed. */
698	#define VERR_FILE_AIO_COMPLETED (-131)
699	/** The I/O context couldn't be destroyed because there are still pending requests. */
700	#define VERR_FILE_AIO_BUSY (-132)
701	/** The requests couldn't be submitted because that would exceed the capacity of the context. */
702	#define VERR_FILE_AIO_LIMIT_EXCEEDED (-133)
703	/** The request was canceled. */
704	#define VERR_FILE_AIO_CANCELED (-134)
705	/** The request wasn't submitted so it can't be canceled. */
706	#define VERR_FILE_AIO_NOT_SUBMITTED (-135)
707	/** A request was not prepared and thus could not be submitted. */
708	#define VERR_FILE_AIO_NOT_PREPARED (-136)
709	/** Not all requests could be submitted due to resource shortage. */
710	#define VERR_FILE_AIO_INSUFFICIENT_RESSOURCES (-137)
711	/** Device or resource is busy. */
712	#define VERR_RESOURCE_BUSY (-138)
713	/** @} */
714
715
716	/** @name Generic Filesystem I/O Status Codes
717	* @{
718	*/
719	/** Unresolved (unknown) disk i/o error. */
720	#define VERR_DISK_IO_ERROR (-150)
721	/** Invalid drive number. */
722	#define VERR_INVALID_DRIVE (-151)
723	/** Disk is full. */
724	#define VERR_DISK_FULL (-152)
725	/** Disk was changed. */
726	#define VERR_DISK_CHANGE (-153)
727	/** Drive is locked. */
728	#define VERR_DRIVE_LOCKED (-154)
729	/** The specified disk or diskette cannot be accessed. */
730	#define VERR_DISK_INVALID_FORMAT (-155)
731	/** Too many symbolic links. */
732	#define VERR_TOO_MANY_SYMLINKS (-156)
733	/** The OS does not support setting the time stamps on a symbolic link. */
734	#define VERR_NS_SYMLINK_SET_TIME (-157)
735	/** The OS does not support changing the owner of a symbolic link. */
736	#define VERR_NS_SYMLINK_CHANGE_OWNER (-158)
737	/** @} */
738
739
740	/** @name Generic Directory Enumeration Status Codes
741	* @{
742	*/
743	/** Unresolved (unknown) search error. */
744	#define VERR_SEARCH_ERROR (-200)
745	/** No more files found. */
746	#define VERR_NO_MORE_FILES (-201)
747	/** No more search handles available. */
748	#define VERR_NO_MORE_SEARCH_HANDLES (-202)
749	/** RTDirReadEx() failed to retrieve the extra data which was requested. */
750	#define VWRN_NO_DIRENT_INFO 203
751	/** @} */
752
753
754	/** @name Internal Processing Errors
755	* @{
756	*/
757	/** Internal error - we're screwed if this happens. */
758	#define VERR_INTERNAL_ERROR (-225)
759	/** Internal error no. 2. */
760	#define VERR_INTERNAL_ERROR_2 (-226)
761	/** Internal error no. 3. */
762	#define VERR_INTERNAL_ERROR_3 (-227)
763	/** Internal error no. 4. */
764	#define VERR_INTERNAL_ERROR_4 (-228)
765	/** Internal error no. 5. */
766	#define VERR_INTERNAL_ERROR_5 (-229)
767	/** Internal error: Unexpected status code. */
768	#define VERR_IPE_UNEXPECTED_STATUS (-230)
769	/** Internal error: Unexpected status code. */
770	#define VERR_IPE_UNEXPECTED_INFO_STATUS (-231)
771	/** Internal error: Unexpected status code. */
772	#define VERR_IPE_UNEXPECTED_ERROR_STATUS (-232)
773	/** Internal error: Uninitialized status code.
774	* @remarks This is used by value elsewhere. */
775	#define VERR_IPE_UNINITIALIZED_STATUS (-233)
776	/** @} */
777
778
779	/** @name Generic Device I/O Status Codes
780	* @{
781	*/
782	/** Unresolved (unknown) device i/o error. */
783	#define VERR_DEV_IO_ERROR (-250)
784	/** Device i/o: Bad unit. */
785	#define VERR_IO_BAD_UNIT (-251)
786	/** Device i/o: Not ready. */
787	#define VERR_IO_NOT_READY (-252)
788	/** Device i/o: Bad command. */
789	#define VERR_IO_BAD_COMMAND (-253)
790	/** Device i/o: CRC error. */
791	#define VERR_IO_CRC (-254)
792	/** Device i/o: Bad length. */
793	#define VERR_IO_BAD_LENGTH (-255)
794	/** Device i/o: Sector not found. */
795	#define VERR_IO_SECTOR_NOT_FOUND (-256)
796	/** Device i/o: General failure. */
797	#define VERR_IO_GEN_FAILURE (-257)
798	/** @} */
799
800
801	/** @name Generic Pipe I/O Status Codes
802	* @{
803	*/
804	/** Unresolved (unknown) pipe i/o error. */
805	#define VERR_PIPE_IO_ERROR (-300)
806	/** Broken pipe. */
807	#define VERR_BROKEN_PIPE (-301)
808	/** Bad pipe. */
809	#define VERR_BAD_PIPE (-302)
810	/** Pipe is busy. */
811	#define VERR_PIPE_BUSY (-303)
812	/** No data in pipe. */
813	#define VERR_NO_DATA (-304)
814	/** Pipe is not connected. */
815	#define VERR_PIPE_NOT_CONNECTED (-305)
816	/** More data available in pipe. */
817	#define VERR_MORE_DATA (-306)
818	/** @} */
819
820
821	/** @name Generic Semaphores Status Codes
822	* @{
823	*/
824	/** Unresolved (unknown) semaphore error. */
825	#define VERR_SEM_ERROR (-350)
826	/** Too many semaphores. */
827	#define VERR_TOO_MANY_SEMAPHORES (-351)
828	/** Exclusive semaphore is owned by another process. */
829	#define VERR_EXCL_SEM_ALREADY_OWNED (-352)
830	/** The semaphore is set and cannot be closed. */
831	#define VERR_SEM_IS_SET (-353)
832	/** The semaphore cannot be set again. */
833	#define VERR_TOO_MANY_SEM_REQUESTS (-354)
834	/** Attempt to release mutex not owned by caller. */
835	#define VERR_NOT_OWNER (-355)
836	/** The semaphore has been opened too many times. */
837	#define VERR_TOO_MANY_OPENS (-356)
838	/** The maximum posts for the event semaphore has been reached. */
839	#define VERR_TOO_MANY_POSTS (-357)
840	/** The event semaphore has already been posted. */
841	#define VERR_ALREADY_POSTED (-358)
842	/** The event semaphore has already been reset. */
843	#define VERR_ALREADY_RESET (-359)
844	/** The semaphore is in use. */
845	#define VERR_SEM_BUSY (-360)
846	/** The previous ownership of this semaphore has ended. */
847	#define VERR_SEM_OWNER_DIED (-361)
848	/** Failed to open semaphore by name - not found. */
849	#define VERR_SEM_NOT_FOUND (-362)
850	/** Semaphore destroyed while waiting. */
851	#define VERR_SEM_DESTROYED (-363)
852	/** Nested ownership requests are not permitted for this semaphore type. */
853	#define VERR_SEM_NESTED (-364)
854	/** Deadlock detected. */
855	#define VERR_DEADLOCK (-365)
856	/** Ping-Pong listen or speak out of turn error. */
857	#define VERR_SEM_OUT_OF_TURN (-366)
858	/** Tried to take a semaphore in a bad context. */
859	#define VERR_SEM_BAD_CONTEXT (-367)
860	/** Don't spin for the semaphore, but it is safe to try grab it. */
861	#define VINF_SEM_BAD_CONTEXT (367)
862	/** Wrong locking order detected. */
863	#define VERR_SEM_LV_WRONG_ORDER (-368)
864	/** Wrong release order detected. */
865	#define VERR_SEM_LV_WRONG_RELEASE_ORDER (-369)
866	/** Attempt to recursively enter a non-recurisve lock. */
867	#define VERR_SEM_LV_NESTED (-370)
868	/** Invalid parameters passed to the lock validator. */
869	#define VERR_SEM_LV_INVALID_PARAMETER (-371)
870	/** The lock validator detected a deadlock. */
871	#define VERR_SEM_LV_DEADLOCK (-372)
872	/** The lock validator detected an existing deadlock.
873	* The deadlock was not caused by the current operation, but existed already. */
874	#define VERR_SEM_LV_EXISTING_DEADLOCK (-373)
875	/** Not the lock owner according our records. */
876	#define VERR_SEM_LV_NOT_OWNER (-374)
877	/** An illegal lock upgrade was attempted. */
878	#define VERR_SEM_LV_ILLEGAL_UPGRADE (-375)
879	/** The thread is not a valid signaller of the event. */
880	#define VERR_SEM_LV_NOT_SIGNALLER (-376)
881	/** Internal error in the lock validator or related components. */
882	#define VERR_SEM_LV_INTERNAL_ERROR (-377)
883	/** @} */
884
885
886	/** @name Generic Network I/O Status Codes
887	* @{
888	*/
889	/** Unresolved (unknown) network error. */
890	#define VERR_NET_IO_ERROR (-400)
891	/** The network is busy or is out of resources. */
892	#define VERR_NET_OUT_OF_RESOURCES (-401)
893	/** Net host name not found. */
894	#define VERR_NET_HOST_NOT_FOUND (-402)
895	/** Network path not found. */
896	#define VERR_NET_PATH_NOT_FOUND (-403)
897	/** General network printing error. */
898	#define VERR_NET_PRINT_ERROR (-404)
899	/** The machine is not on the network. */
900	#define VERR_NET_NO_NETWORK (-405)
901	/** Name is not unique on the network. */
902	#define VERR_NET_NOT_UNIQUE_NAME (-406)
903
904	/* These are BSD networking error codes - numbers correspond, don't mess! */
905	/** Operation in progress. */
906	#define VERR_NET_IN_PROGRESS (-436)
907	/** Operation already in progress. */
908	#define VERR_NET_ALREADY_IN_PROGRESS (-437)
909	/** Attempted socket operation with a non-socket handle.
910	* (This includes closed handles.) */
911	#define VERR_NET_NOT_SOCKET (-438)
912	/** Destination address required. */
913	#define VERR_NET_DEST_ADDRESS_REQUIRED (-439)
914	/** Message too long. */
915	#define VERR_NET_MSG_SIZE (-440)
916	/** Protocol wrong type for socket. */
917	#define VERR_NET_PROTOCOL_TYPE (-441)
918	/** Protocol not available. */
919	#define VERR_NET_PROTOCOL_NOT_AVAILABLE (-442)
920	/** Protocol not supported. */
921	#define VERR_NET_PROTOCOL_NOT_SUPPORTED (-443)
922	/** Socket type not supported. */
923	#define VERR_NET_SOCKET_TYPE_NOT_SUPPORTED (-444)
924	/** Operation not supported. */
925	#define VERR_NET_OPERATION_NOT_SUPPORTED (-445)
926	/** Protocol family not supported. */
927	#define VERR_NET_PROTOCOL_FAMILY_NOT_SUPPORTED (-446)
928	/** Address family not supported by protocol family. */
929	#define VERR_NET_ADDRESS_FAMILY_NOT_SUPPORTED (-447)
930	/** Address already in use. */
931	#define VERR_NET_ADDRESS_IN_USE (-448)
932	/** Can't assign requested address. */
933	#define VERR_NET_ADDRESS_NOT_AVAILABLE (-449)
934	/** Network is down. */
935	#define VERR_NET_DOWN (-450)
936	/** Network is unreachable. */
937	#define VERR_NET_UNREACHABLE (-451)
938	/** Network dropped connection on reset. */
939	#define VERR_NET_CONNECTION_RESET (-452)
940	/** Software caused connection abort. */
941	#define VERR_NET_CONNECTION_ABORTED (-453)
942	/** Connection reset by peer. */
943	#define VERR_NET_CONNECTION_RESET_BY_PEER (-454)
944	/** No buffer space available. */
945	#define VERR_NET_NO_BUFFER_SPACE (-455)
946	/** Socket is already connected. */
947	#define VERR_NET_ALREADY_CONNECTED (-456)
948	/** Socket is not connected. */
949	#define VERR_NET_NOT_CONNECTED (-457)
950	/** Can't send after socket shutdown. */
951	#define VERR_NET_SHUTDOWN (-458)
952	/** Too many references: can't splice. */
953	#define VERR_NET_TOO_MANY_REFERENCES (-459)
954	/** Too many references: can't splice. */
955	#define VERR_NET_CONNECTION_TIMED_OUT (-460)
956	/** Connection refused. */
957	#define VERR_NET_CONNECTION_REFUSED (-461)
958	/* ELOOP is not net. */
959	/* ENAMETOOLONG is not net. */
960	/** Host is down. */
961	#define VERR_NET_HOST_DOWN (-464)
962	/** No route to host. */
963	#define VERR_NET_HOST_UNREACHABLE (-465)
964	/** Protocol error. */
965	#define VERR_NET_PROTOCOL_ERROR (-466)
966	/** @} */
967
968
969	/** @name TCP Status Codes
970	* @{
971	*/
972	/** Stop the TCP server. */
973	#define VERR_TCP_SERVER_STOP (-500)
974	/** The server was stopped. */
975	#define VINF_TCP_SERVER_STOP 500
976	/** The TCP server was shut down using RTTcpServerShutdown. */
977	#define VERR_TCP_SERVER_SHUTDOWN (-501)
978	/** The TCP server was destroyed. */
979	#define VERR_TCP_SERVER_DESTROYED (-502)
980	/** The TCP server has no client associated with it. */
981	#define VINF_TCP_SERVER_NO_CLIENT 503
982	/** @} */
983
984
985	/** @name L4 Specific Status Codes
986	* @{
987	*/
988	/** Invalid offset in an L4 dataspace */
989	#define VERR_L4_INVALID_DS_OFFSET (-550)
990	/** IPC error */
991	#define VERR_IPC (-551)
992	/** Item already used */
993	#define VERR_RESOURCE_IN_USE (-552)
994	/** Source/destination not found */
995	#define VERR_IPC_PROCESS_NOT_FOUND (-553)
996	/** Receive timeout */
997	#define VERR_IPC_RECEIVE_TIMEOUT (-554)
998	/** Send timeout */
999	#define VERR_IPC_SEND_TIMEOUT (-555)
1000	/** Receive cancelled */
1001	#define VERR_IPC_RECEIVE_CANCELLED (-556)
1002	/** Send cancelled */
1003	#define VERR_IPC_SEND_CANCELLED (-557)
1004	/** Receive aborted */
1005	#define VERR_IPC_RECEIVE_ABORTED (-558)
1006	/** Send aborted */
1007	#define VERR_IPC_SEND_ABORTED (-559)
1008	/** Couldn't map pages during receive */
1009	#define VERR_IPC_RECEIVE_MAP_FAILED (-560)
1010	/** Couldn't map pages during send */
1011	#define VERR_IPC_SEND_MAP_FAILED (-561)
1012	/** Send pagefault timeout in receive */
1013	#define VERR_IPC_RECEIVE_SEND_PF_TIMEOUT (-562)
1014	/** Send pagefault timeout in send */
1015	#define VERR_IPC_SEND_SEND_PF_TIMEOUT (-563)
1016	/** (One) receive buffer was too small, or too few buffers */
1017	#define VINF_IPC_RECEIVE_MSG_CUT 564
1018	/** (One) send buffer was too small, or too few buffers */
1019	#define VINF_IPC_SEND_MSG_CUT 565
1020	/** Dataspace manager server not found */
1021	#define VERR_L4_DS_MANAGER_NOT_FOUND (-566)
1022	/** @} */
1023
1024
1025	/** @name Loader Status Codes.
1026	* @{
1027	*/
1028	/** Invalid executable signature. */
1029	#define VERR_INVALID_EXE_SIGNATURE (-600)
1030	/** The iprt loader recognized a ELF image, but doesn't support loading it. */
1031	#define VERR_ELF_EXE_NOT_SUPPORTED (-601)
1032	/** The iprt loader recognized a PE image, but doesn't support loading it. */
1033	#define VERR_PE_EXE_NOT_SUPPORTED (-602)
1034	/** The iprt loader recognized a LX image, but doesn't support loading it. */
1035	#define VERR_LX_EXE_NOT_SUPPORTED (-603)
1036	/** The iprt loader recognized a LE image, but doesn't support loading it. */
1037	#define VERR_LE_EXE_NOT_SUPPORTED (-604)
1038	/** The iprt loader recognized a NE image, but doesn't support loading it. */
1039	#define VERR_NE_EXE_NOT_SUPPORTED (-605)
1040	/** The iprt loader recognized a MZ image, but doesn't support loading it. */
1041	#define VERR_MZ_EXE_NOT_SUPPORTED (-606)
1042	/** The iprt loader recognized an a.out image, but doesn't support loading it. */
1043	#define VERR_AOUT_EXE_NOT_SUPPORTED (-607)
1044	/** Bad executable. */
1045	#define VERR_BAD_EXE_FORMAT (-608)
1046	/** Symbol (export) not found. */
1047	#define VERR_SYMBOL_NOT_FOUND (-609)
1048	/** Module not found. */
1049	#define VERR_MODULE_NOT_FOUND (-610)
1050	/** The loader resolved an external symbol to an address to big for the image format. */
1051	#define VERR_SYMBOL_VALUE_TOO_BIG (-611)
1052	/** The image is too big. */
1053	#define VERR_IMAGE_TOO_BIG (-612)
1054	/** The image base address is to high for this image type. */
1055	#define VERR_IMAGE_BASE_TOO_HIGH (-614)
1056	/** Mismatching architecture. */
1057	#define VERR_LDR_ARCH_MISMATCH (-615)
1058	/** Mismatch between IPRT and native loader. */
1059	#define VERR_LDR_MISMATCH_NATIVE (-616)
1060	/** Failed to resolve an imported (external) symbol. */
1061	#define VERR_LDR_IMPORTED_SYMBOL_NOT_FOUND (-617)
1062	/** Generic loader failure. */
1063	#define VERR_LDR_GENERAL_FAILURE (-618)
1064	/** Code signing error. */
1065	#define VERR_LDR_IMAGE_HASH (-619)
1066	/** The PE loader encountered delayed imports, a feature which hasn't been implemented yet. */
1067	#define VERR_LDRPE_DELAY_IMPORT (-620)
1068	/** The PE loader encountered a malformed certificate. */
1069	#define VERR_LDRPE_CERT_MALFORMED (-621)
1070	/** The PE loader encountered a certificate with an unsupported type or structure revision. */
1071	#define VERR_LDRPE_CERT_UNSUPPORTED (-622)
1072	/** The PE loader doesn't know how to deal with the global pointer data directory entry yet. */
1073	#define VERR_LDRPE_GLOBALPTR (-623)
1074	/** The PE loader doesn't support the TLS data directory yet. */
1075	#define VERR_LDRPE_TLS (-624)
1076	/** The PE loader doesn't grok the COM descriptor data directory entry. */
1077	#define VERR_LDRPE_COM_DESCRIPTOR (-625)
1078	/** The PE loader encountered an unknown load config directory/header size. */
1079	#define VERR_LDRPE_LOAD_CONFIG_SIZE (-626)
1080	/** The PE loader encountered a lock prefix table, a feature which hasn't been implemented yet. */
1081	#define VERR_LDRPE_LOCK_PREFIX_TABLE (-627)
1082	/** The ELF loader doesn't handle foreign endianness. */
1083	#define VERR_LDRELF_ODD_ENDIAN (-630)
1084	/** The ELF image is 'dynamic', the ELF loader can only deal with 'relocatable' images at present. */
1085	#define VERR_LDRELF_DYN (-631)
1086	/** The ELF image is 'executable', the ELF loader can only deal with 'relocatable' images at present. */
1087	#define VERR_LDRELF_EXEC (-632)
1088	/** The ELF image was created for an unsupported target machine type. */
1089	#define VERR_LDRELF_MACHINE (-633)
1090	/** The ELF version is not supported. */
1091	#define VERR_LDRELF_VERSION (-634)
1092	/** The ELF loader cannot handle multiple SYMTAB sections. */
1093	#define VERR_LDRELF_MULTIPLE_SYMTABS (-635)
1094	/** The ELF loader encountered a relocation type which is not implemented. */
1095	#define VERR_LDRELF_RELOCATION_NOT_SUPPORTED (-636)
1096	/** The ELF loader encountered a bad symbol index. */
1097	#define VERR_LDRELF_INVALID_SYMBOL_INDEX (-637)
1098	/** The ELF loader encountered an invalid symbol name offset. */
1099	#define VERR_LDRELF_INVALID_SYMBOL_NAME_OFFSET (-638)
1100	/** The ELF loader encountered an invalid relocation offset. */
1101	#define VERR_LDRELF_INVALID_RELOCATION_OFFSET (-639)
1102	/** The ELF loader didn't find the symbol/string table for the image. */
1103	#define VERR_LDRELF_NO_SYMBOL_OR_NO_STRING_TABS (-640)
1104	/** @}*/
1105
1106	/** @name Debug Info Reader Status Codes.
1107	* @{
1108	*/
1109	/** The module contains no line number information. */
1110	#define VERR_DBG_NO_LINE_NUMBERS (-650)
1111	/** The module contains no symbol information. */
1112	#define VERR_DBG_NO_SYMBOLS (-651)
1113	/** The specified segment:offset address was invalid. Typically an attempt at
1114	* addressing outside the segment boundary. */
1115	#define VERR_DBG_INVALID_ADDRESS (-652)
1116	/** Invalid segment index. */
1117	#define VERR_DBG_INVALID_SEGMENT_INDEX (-653)
1118	/** Invalid segment offset. */
1119	#define VERR_DBG_INVALID_SEGMENT_OFFSET (-654)
1120	/** Invalid image relative virtual address. */
1121	#define VERR_DBG_INVALID_RVA (-655)
1122	/** Invalid image relative virtual address. */
1123	#define VERR_DBG_SPECIAL_SEGMENT (-656)
1124	/** Address conflict within a module/segment.
1125	* Attempted to add a segment, symbol or line number that fully or partially
1126	* overlaps with an existing one. */
1127	#define VERR_DBG_ADDRESS_CONFLICT (-657)
1128	/** Duplicate symbol within the module.
1129	* Attempted to add a symbol which name already exists within the module. */
1130	#define VERR_DBG_DUPLICATE_SYMBOL (-658)
1131	/** The segment index specified when adding a new segment is already in use. */
1132	#define VERR_DBG_SEGMENT_INDEX_CONFLICT (-659)
1133	/** No line number was found for the specified address/ordinal/whatever. */
1134	#define VERR_DBG_LINE_NOT_FOUND (-660)
1135	/** The length of the symbol name is out of range.
1136	* This means it is an empty string or that it's greater or equal to
1137	* RTDBG_SYMBOL_NAME_LENGTH. */
1138	#define VERR_DBG_SYMBOL_NAME_OUT_OF_RANGE (-661)
1139	/** The length of the file name is out of range.
1140	* This means it is an empty string or that it's greater or equal to
1141	* RTDBG_FILE_NAME_LENGTH. */
1142	#define VERR_DBG_FILE_NAME_OUT_OF_RANGE (-662)
1143	/** The length of the segment name is out of range.
1144	* This means it is an empty string or that it is greater or equal to
1145	* RTDBG_SEGMENT_NAME_LENGTH. */
1146	#define VERR_DBG_SEGMENT_NAME_OUT_OF_RANGE (-663)
1147	/** The specified address range wraps around. */
1148	#define VERR_DBG_ADDRESS_WRAP (-664)
1149	/** The file is not a valid NM map file. */
1150	#define VERR_DBG_NOT_NM_MAP_FILE (-665)
1151	/** The file is not a valid /proc/kallsyms file. */
1152	#define VERR_DBG_NOT_LINUX_KALLSYMS (-666)
1153	/** No debug module interpreter matching the debug info. */
1154	#define VERR_DBG_NO_MATCHING_INTERPRETER (-667)
1155	/** @} */
1156
1157	/** @name Request Packet Status Codes.
1158	* @{
1159	*/
1160	/** Invalid RT request type.
1161	* For the RTReqAlloc() case, the caller just specified an illegal enmType. For
1162	* all the other occurrences it means indicates corruption, broken logic, or stupid
1163	* interface user. */
1164	#define VERR_RT_REQUEST_INVALID_TYPE (-700)
1165	/** Invalid RT request state.
1166	* The state of the request packet was not the expected and accepted one(s). Either
1167	* the interface user screwed up, or we've got corruption/broken logic. */
1168	#define VERR_RT_REQUEST_STATE (-701)
1169	/** Invalid RT request packet.
1170	* One or more of the RT controlled packet members didn't contain the correct
1171	* values. Some thing's broken. */
1172	#define VERR_RT_REQUEST_INVALID_PACKAGE (-702)
1173	/** The status field has not been updated yet as the request is still
1174	* pending completion. Someone queried the iStatus field before the request
1175	* has been fully processed. */
1176	#define VERR_RT_REQUEST_STATUS_STILL_PENDING (-703)
1177	/** The request has been freed, don't read the status now.
1178	* Someone is reading the iStatus field of a freed request packet. */
1179	#define VERR_RT_REQUEST_STATUS_FREED (-704)
1180	/** @} */
1181
1182	/** @name Environment Status Code
1183	* @{
1184	*/
1185	/** The specified environment variable was not found. (RTEnvGetEx) */
1186	#define VERR_ENV_VAR_NOT_FOUND (-750)
1187	/** The specified environment variable was not found. (RTEnvUnsetEx) */
1188	#define VINF_ENV_VAR_NOT_FOUND (750)
1189	/** @} */
1190
1191	/** @name Multiprocessor Status Codes.
1192	* @{
1193	*/
1194	/** The specified cpu is offline. */
1195	#define VERR_CPU_OFFLINE (-800)
1196	/** The specified cpu was not found. */
1197	#define VERR_CPU_NOT_FOUND (-801)
1198	/** @} */
1199
1200	/** @name RTGetOpt status codes
1201	* @{ */
1202	/** RTGetOpt: Command line option not recognized. */
1203	#define VERR_GETOPT_UNKNOWN_OPTION (-825)
1204	/** RTGetOpt: Command line option needs argument. */
1205	#define VERR_GETOPT_REQUIRED_ARGUMENT_MISSING (-826)
1206	/** RTGetOpt: Command line option has argument with bad format. */
1207	#define VERR_GETOPT_INVALID_ARGUMENT_FORMAT (-827)
1208	/** RTGetOpt: Not an option. */
1209	#define VINF_GETOPT_NOT_OPTION 828
1210	/** RTGetOpt: Command line option needs an index. */
1211	#define VERR_GETOPT_INDEX_MISSING (-829)
1212	/** @} */
1213
1214	/** @name RTCache status codes
1215	* @{ */
1216	/** RTCache: cache is full. */
1217	#define VERR_CACHE_FULL (-850)
1218	/** RTCache: cache is empty. */
1219	#define VERR_CACHE_EMPTY (-851)
1220	/** @} */
1221
1222	/** @name RTMemCache status codes
1223	* @{ */
1224	/** Reached the max cache size. */
1225	#define VERR_MEM_CACHE_MAX_SIZE (-855)
1226	/** @} */
1227
1228	/** @name RTS3 status codes
1229	* @{ */
1230	/** Access denied error. */
1231	#define VERR_S3_ACCESS_DENIED (-875)
1232	/** The bucket/key wasn't found. */
1233	#define VERR_S3_NOT_FOUND (-876)
1234	/** Bucket already exists. */
1235	#define VERR_S3_BUCKET_ALREADY_EXISTS (-877)
1236	/** Can't delete bucket with keys. */
1237	#define VERR_S3_BUCKET_NOT_EMPTY (-878)
1238	/** The current operation was canceled. */
1239	#define VERR_S3_CANCELED (-879)
1240	/** @} */
1241
1242	/** @name RTManifest status codes
1243	* @{ */
1244	/** A digest type used in the manifest file isn't supported. */
1245	#define VERR_MANIFEST_UNSUPPORTED_DIGEST_TYPE (-900)
1246	/** An entry in the manifest file couldn't be interpreted correctly. */
1247	#define VERR_MANIFEST_WRONG_FILE_FORMAT (-901)
1248	/** A digest doesn't match the corresponding file. */
1249	#define VERR_MANIFEST_DIGEST_MISMATCH (-902)
1250	/** The file list doesn't match to the content of the manifest file. */
1251	#define VERR_MANIFEST_FILE_MISMATCH (-903)
1252	/** @} */
1253
1254	/** @name RTTar status codes
1255	* @{ */
1256	/** The checksum of a tar header record doesn't match. */
1257	#define VERR_TAR_CHKSUM_MISMATCH (-925)
1258	/** The tar end of file record was read. */
1259	#define VERR_TAR_END_OF_FILE (-926)
1260	/** @} */
1261
1262	/** @name RTPoll status codes
1263	* @{ */
1264	/** The handle is not pollable. */
1265	#define VERR_POLL_HANDLE_NOT_POLLABLE (-950)
1266	/** The handle ID is already present in the poll set. */
1267	#define VERR_POLL_HANDLE_ID_EXISTS (-951)
1268	/** The handle ID was not found in the set. */
1269	#define VERR_POLL_HANDLE_ID_NOT_FOUND (-952)
1270	/** The poll set is full. */
1271	#define VERR_POLL_SET_IS_FULL (-953)
1272	/** @} */
1273
1274	/* SED-END */
1275
1276	/** @} */
1277
1278	RT_C_DECLS_END
1279
1280	#endif
1281

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/include/iprt/err.h@ 32599

Download in other formats: