/** @file * IPRT - Multiprocessor. */ /* * Copyright (C) 2008-2017 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_mp_h #define ___iprt_mp_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_mp RTMp - Multiprocessor * @ingroup grp_rt * @{ */ /** * Gets the identifier of the CPU executing the call. * * When called from a system mode where scheduling is active, like ring-3 or * kernel mode with interrupts enabled on some systems, no assumptions should * be made about the current CPU when the call returns. * * @returns CPU Id. */ RTDECL(RTCPUID) RTMpCpuId(void); /** * Get the CPU set index of the CPU executing the call. * * Same scheduling warnings as for RTMpCpuId(). * * @returns CPU set index. */ RTDECL(int) RTMpCurSetIndex(void); /** * Get the CPU set index and identifier of the CPU executing the call. * * Same scheduling warnings as for RTMpCpuId(). * * @returns CPU set index. * @param pidCpu Where to return the CPU identifier. (not optional) */ RTDECL(int) RTMpCurSetIndexAndId(PRTCPUID pidCpu); /** * Converts a CPU identifier to a CPU set index. * * This may or may not validate the presence of the CPU. * * @returns The CPU set index on success, -1 on failure. * @param idCpu The identifier of the CPU. */ RTDECL(int) RTMpCpuIdToSetIndex(RTCPUID idCpu); /** * Converts a CPU set index to a a CPU identifier. * * This may or may not validate the presence of the CPU, so, use * RTMpIsCpuPossible for that. * * @returns The corresponding CPU identifier, NIL_RTCPUID on failure. * @param iCpu The CPU set index. */ RTDECL(RTCPUID) RTMpCpuIdFromSetIndex(int iCpu); /** * Translates an NT process group member to a CPU set index. * * @returns CPU set index, -1 if not valid. * @param idxGroup The CPU group. * @param idxMember The CPU group member number. * * @remarks Only available on Windows. */ RTDECL(int) RTMpSetIndexFromCpuGroupMember(uint32_t idxGroup, uint32_t idxMember); /** * Gets the member numbers for a CPU group. * * @returns Maximum number of group members. * @param idxGroup The CPU group. * @param pcActive Where to return the number of active members. * * @remarks Only available on Windows. */ RTDECL(uint32_t) RTMpGetCpuGroupCounts(uint32_t idxGroup, uint32_t *pcActive); /** * Get the maximum number of CPU groups. * * @returns Maximum number of CPU groups. * * @remarks Only available on Windows. */ RTDECL(uint32_t) RTMpGetMaxCpuGroupCount(void); /** * Gets the max CPU identifier (inclusive). * * Intended for brute force enumerations, but use with * care as it may be expensive. * * @returns The current higest CPU identifier value. */ RTDECL(RTCPUID) RTMpGetMaxCpuId(void); /** * Gets the size of a CPU array that is indexed by CPU set index. * * This takes both online, offline and hot-plugged cpus into account. * * @returns Number of elements. * * @remarks Use RTMpCpuIdToSetIndex to convert a RTCPUID into an array index. */ RTDECL(uint32_t) RTMpGetArraySize(void); /** * Checks if a CPU exists in the system or may possibly be hotplugged later. * * @returns true/false accordingly. * @param idCpu The identifier of the CPU. */ RTDECL(bool) RTMpIsCpuPossible(RTCPUID idCpu); /** * Gets set of the CPUs present in the system plus any that may * possibly be hotplugged later. * * @returns pSet. * @param pSet Where to put the set. */ RTDECL(PRTCPUSET) RTMpGetSet(PRTCPUSET pSet); /** * Get the count of CPUs present in the system plus any that may * possibly be hotplugged later. * * @returns The count. * @remarks Don't use this for CPU array sizing, use RTMpGetArraySize instead. */ RTDECL(RTCPUID) RTMpGetCount(void); /** * Get the count of physical CPU cores present in the system plus any that may * possibly be hotplugged later. * * @returns The number of cores. */ RTDECL(RTCPUID) RTMpGetCoreCount(void); /** * Gets set of the CPUs present that are currently online. * * @returns pSet. * @param pSet Where to put the set. */ RTDECL(PRTCPUSET) RTMpGetOnlineSet(PRTCPUSET pSet); /** * Get the count of CPUs that are currently online. * * @return The count. */ RTDECL(RTCPUID) RTMpGetOnlineCount(void); /** * Get the count of physical CPU cores in the system with one or more online * threads. * * @returns The number of online cores. */ RTDECL(RTCPUID) RTMpGetOnlineCoreCount(void); /** * Checks if a CPU is online or not. * * @returns true/false accordingly. * @param idCpu The identifier of the CPU. */ RTDECL(bool) RTMpIsCpuOnline(RTCPUID idCpu); /** * Gets set of the CPUs present in the system. * * @returns pSet. * @param pSet Where to put the set. */ RTDECL(PRTCPUSET) RTMpGetPresentSet(PRTCPUSET pSet); /** * Get the count of CPUs that are present in the system. * * @return The count. */ RTDECL(RTCPUID) RTMpGetPresentCount(void); /** * Get the count of physical CPU cores present in the system. * * @returns The number of cores. */ RTDECL(RTCPUID) RTMpGetPresentCoreCount(void); /** * Checks if a CPU is present in the system. * * @returns true/false accordingly. * @param idCpu The identifier of the CPU. */ RTDECL(bool) RTMpIsCpuPresent(RTCPUID idCpu); /** * Get the current frequency of a CPU. * * The CPU must be online. * * @returns The frequency as MHz. 0 if the CPU is offline * or the information is not available. * @param idCpu The identifier of the CPU. */ RTDECL(uint32_t) RTMpGetCurFrequency(RTCPUID idCpu); /** * Get the maximum frequency of a CPU. * * The CPU must be online. * * @returns The frequency as MHz. 0 if the CPU is offline * or the information is not available. * @param idCpu The identifier of the CPU. */ RTDECL(uint32_t) RTMpGetMaxFrequency(RTCPUID idCpu); /** * Get the CPU description string. * * The CPU must be online. * * @returns IPRT status code. * @param idCpu The identifier of the CPU. NIL_RTCPUID can be used to * indicate the current CPU. * @param pszBuf The output buffer. * @param cbBuf The size of the output buffer. */ RTDECL(int) RTMpGetDescription(RTCPUID idCpu, char *pszBuf, size_t cbBuf); #ifdef IN_RING0 /** * Check if there's work (DPCs on Windows) pending on the current CPU. * * @return true if there's pending work on the current CPU, false otherwise. */ RTDECL(bool) RTMpIsCpuWorkPending(void); /** * Worker function passed to RTMpOnAll, RTMpOnOthers and RTMpOnSpecific that * is to be called on the target cpus. * * @param idCpu The identifier for the CPU the function is called on. * @param pvUser1 The 1st user argument. * @param pvUser2 The 2nd user argument. */ typedef DECLCALLBACK(void) FNRTMPWORKER(RTCPUID idCpu, void *pvUser1, void *pvUser2); /** Pointer to a FNRTMPWORKER. */ typedef FNRTMPWORKER *PFNRTMPWORKER; /** @name RTMPON_F_XXX - RTMpOn flags. * @{ */ /** Caller doesn't care if pfnWorker is executed at the same time on the * specified CPUs or not, as long as it gets executed. */ #define RTMPON_F_WHATEVER_EXEC 0 /** The caller insists on pfnWorker being executed more or less concurrently * on the specified CPUs. */ #define RTMPON_F_CONCURRENT_EXEC RT_BIT_32(1) /** Mask of valid bits. */ #define RTMPON_F_VALID_MASK UINT32_C(0x00000001) /** @}*/ /** * Checks if the RTMpOnAll() is safe with regards to all threads executing * concurrently. * * If for instance, the RTMpOnAll() is implemented in a way where the threads * might cause a classic deadlock, it is considered -not- concurrent safe. * Windows currently is one such platform where it isn't safe. * * @returns true if RTMpOnAll() is concurrent safe, false otherwise. */ RTDECL(bool) RTMpOnAllIsConcurrentSafe(void); /** * Executes a function on each (online) CPU in the system. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_NOT_SUPPORTED if this kind of operation isn't supported by the system. * * @param pfnWorker The worker function. * @param pvUser1 The first user argument for the worker. * @param pvUser2 The second user argument for the worker. * * @remarks The execution isn't in any way guaranteed to be simultaneous, * it might even be serial (cpu by cpu). */ RTDECL(int) RTMpOnAll(PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2); /** * Executes a function on a all other (online) CPUs in the system. * * The caller must disable preemption prior to calling this API if the outcome * is to make any sense. But do *not* disable interrupts. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_NOT_SUPPORTED if this kind of operation isn't supported by the system. * * @param pfnWorker The worker function. * @param pvUser1 The first user argument for the worker. * @param pvUser2 The second user argument for the worker. * * @remarks The execution isn't in any way guaranteed to be simultaneous, * it might even be serial (cpu by cpu). */ RTDECL(int) RTMpOnOthers(PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2); /** * Executes a function on a specific CPU in the system. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_NOT_SUPPORTED if this kind of operation isn't supported by the system. * @retval VERR_CPU_OFFLINE if the CPU is offline. * @retval VERR_CPU_NOT_FOUND if the CPU wasn't found. * * @param idCpu The id of the CPU. * @param pfnWorker The worker function. * @param pvUser1 The first user argument for the worker. * @param pvUser2 The second user argument for the worker. */ RTDECL(int) RTMpOnSpecific(RTCPUID idCpu, PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2); /** * Executes a function on two specific CPUs in the system. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_NOT_SUPPORTED if this kind of operation isn't supported by the * system or if the specified modifier flag isn't supported. * @retval VERR_CPU_OFFLINE if one or more of the CPUs are offline (see * remarks). * @retval VERR_CPU_NOT_FOUND if on or both of the CPUs weren't found. * @retval VERR_NOT_ALL_CPUS_SHOWED if one of the CPUs didn't show. * * @param idCpu1 The id of the first CPU. * @param idCpu2 The id of the second CPU. * @param fFlags Combination of RTMPON_F_XXX flags. * @param pfnWorker The worker function. * @param pvUser1 The first user argument for the worker. * @param pvUser2 The second user argument for the worker. * * @remarks There is a possible race between one (or both) of the CPUs going * offline while setting up the call. The worker function must take * this into account. */ RTDECL(int) RTMpOnPair(RTCPUID idCpu1, RTCPUID idCpu2, uint32_t fFlags, PFNRTMPWORKER pfnWorker, void *pvUser1, void *pvUser2); /** * Indicates whether RTMpOnPair supports running the pfnWorker concurrently on * both CPUs using RTMPON_F_CONCURRENT_EXEC. * * @returns true if supported, false if not. */ RTDECL(bool) RTMpOnPairIsConcurrentExecSupported(void); /** * Pokes the specified CPU. * * This should cause the execution on the CPU to be interrupted and forcing it * to enter kernel context. It is optimized version of a RTMpOnSpecific call * with a worker which returns immediately. * * @returns IPRT status code. * @retval VERR_NOT_SUPPORTED if this kind of operation isn't supported by the * system. The caller must not automatically assume that this API works * when any of the RTMpOn* APIs works. This is because not all systems * supports unicast MP events and this API will not be implemented as a * broadcast. * @retval VERR_CPU_OFFLINE if the CPU is offline. * @retval VERR_CPU_NOT_FOUND if the CPU wasn't found. * * @param idCpu The id of the CPU to poke. */ RTDECL(int) RTMpPokeCpu(RTCPUID idCpu); /** * MP event, see FNRTMPNOTIFICATION. */ typedef enum RTMPEVENT { /** The CPU goes online. */ RTMPEVENT_ONLINE = 1, /** The CPU goes offline. */ RTMPEVENT_OFFLINE } RTMPEVENT; /** * Notification callback. * * The context this is called in differs a bit from platform to platform, so be * careful while in here. * * On Windows we're running with IRQL=PASSIVE_LEVEL (reschedulable) according to * the KeRegisterProcessorChangeCallback documentation - unrestricted API * access. Probably not being called on the onlined/offlined CPU... * * On Solaris we're holding the cpu_lock, IPL/SPL/PIL is not yet known, however * we will most likely -not- be firing on the CPU going offline/online. * * On Linux it looks like we're called with preemption enabled on any CPU and * not necessarily on the CPU going offline/online. * * There is no callbacks for darwin at the moment, due to lack of suitable KPI. * * @param idCpu The CPU this applies to. * @param enmEvent The event. * @param pvUser The user argument. */ typedef DECLCALLBACK(void) FNRTMPNOTIFICATION(RTMPEVENT enmEvent, RTCPUID idCpu, void *pvUser); /** Pointer to a FNRTMPNOTIFICATION(). */ typedef FNRTMPNOTIFICATION *PFNRTMPNOTIFICATION; /** * Registers a notification callback for cpu events. * * On platforms which doesn't do cpu offline/online events this API * will just be a no-op that pretends to work. * * @todo We'll be adding a flag to this soon to indicate whether the callback should be called on all * CPUs that are currently online while it's being registered. This is to help avoid some race * conditions (we'll hopefully be able to implement this on linux, solaris/win is no issue). * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_NO_MEMORY if a registration record cannot be allocated. * @retval VERR_ALREADY_EXISTS if the pfnCallback and pvUser already exist * in the callback list. * * @param pfnCallback The callback. * @param pvUser The user argument to the callback function. */ RTDECL(int) RTMpNotificationRegister(PFNRTMPNOTIFICATION pfnCallback, void *pvUser); /** * This deregisters a notification callback registered via RTMpNotificationRegister(). * * The pfnCallback and pvUser arguments must be identical to the registration call * of we won't find the right entry. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_NOT_FOUND if no matching entry was found. * * @param pfnCallback The callback. * @param pvUser The user argument to the callback function. */ RTDECL(int) RTMpNotificationDeregister(PFNRTMPNOTIFICATION pfnCallback, void *pvUser); #endif /* IN_RING0 */ /** @} */ RT_C_DECLS_END #endif