/** @file * IPRT - System Information. */ /* * Copyright (C) 2006-2007 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ #ifndef ___iprt_system_h #define ___iprt_system_h #include #include RT_C_DECLS_BEGIN /** @defgroup grp_rt_system RTSystem - System Information * @ingroup grp_rt * @{ */ /** * Info level for RTSystemGetOSInfo(). */ typedef enum RTSYSOSINFO { RTSYSOSINFO_INVALID = 0, /**< The usual invalid entry. */ RTSYSOSINFO_PRODUCT, /**< OS product name. (uname -o) */ RTSYSOSINFO_RELEASE, /**< OS release. (uname -r) */ RTSYSOSINFO_VERSION, /**< OS version, optional. (uname -v) */ RTSYSOSINFO_SERVICE_PACK, /**< Service/fix pack level, optional. */ RTSYSOSINFO_END /**< End of the valid info levels. */ } RTSYSOSINFO; /** * Queries information about the OS. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_INVALID_PARAMETER if enmInfo is invalid. * @retval VERR_INVALID_POINTER if pszInfoStr is invalid. * @retval VERR_BUFFER_OVERFLOW if the buffer is too small. The buffer will * contain the chopped off result in this case, provided cchInfo isn't 0. * @retval VERR_NOT_SUPPORTED if the info level isn't implemented. The buffer will * contain an empty string. * * @param enmInfo The OS info level. * @param pszInfo Where to store the result. * @param cchInfo The size of the output buffer. */ RTDECL(int) RTSystemQueryOSInfo(RTSYSOSINFO enmInfo, char *pszInfo, size_t cchInfo); /** * Queries the total amount of RAM in the system. * * This figure does not given any information about how much memory is * currently available. Use RTSystemQueryAvailableRam instead. * * @returns IPRT status code. * @retval VINF_SUCCESS and *pcb on sucess. * @retval VERR_ACCESS_DENIED if the information isn't accessible to the * caller. * * @param pcb Where to store the result (in bytes). */ RTDECL(int) RTSystemQueryTotalRam(uint64_t *pcb); /** * Queries the total amount of RAM accessible to the system. * * This figure should not include memory that is installed but not used, * nor memory that will be slow to bring online. The definition of 'slow' * here is slower than swapping out a MB of pages to disk. * * @returns IPRT status code. * @retval VINF_SUCCESS and *pcb on success. * @retval VERR_ACCESS_DENIED if the information isn't accessible to the * caller. * * @param pcb Where to store the result (in bytes). */ RTDECL(int) RTSystemQueryAvailableRam(uint64_t *pcb); /** * Queries the amount of RAM that is currently locked down or in some other * way made impossible to virtualize within reasonably short time. * * The purposes of this API is, when combined with RTSystemQueryTotalRam, to * be able to determine an absolute max limit for how much fixed memory it is * (theoretically) possible to allocate (or lock down). * * The kind memory covered by this function includes: * - locked (wired) memory - like for instance RTR0MemObjLockUser * and RTR0MemObjLockKernel makes, * - kernel pools and heaps - like for instance the ring-0 variant * of RTMemAlloc taps into, * - fixed (not pageable) kernel allocations - like for instance * all the RTR0MemObjAlloc* functions makes, * - any similar memory that isn't easily swapped out, discarded, * or flushed to disk. * * This works against the value returned by RTSystemQueryTotalRam, and * the value reported by this function can never be larger than what a * call to RTSystemQueryTotalRam returns. * * The short time term here is relative to swapping to disk like in * RTSystemQueryTotalRam. This could mean that (part of) the dirty buffers * in the dynamic I/O cache could be included in the total. If the dynamic * I/O cache isn't likely to either flush buffers when the load increases * and put them back into normal circulation, they should be included in * the memory accounted for here. * * @retval VINF_SUCCESS and *pcb on success. * @retval VERR_NOT_SUPPORTED if the information isn't available on the * system in general. The caller must handle this scenario. * @retval VERR_ACCESS_DENIED if the information isn't accessible to the * caller. * * @param pcb Where to store the result (in bytes). * * @remarks This function could've been inverted and called * RTSystemQueryAvailableRam, but that might give impression that * it would be possible to allocate the amount of memory it * indicates for a single purpose, something which would be very * improbable on most systems. * * @remarks We might have to add another output parameter to this function * that indicates if some of the memory kinds listed above cannot * be accounted for on the system and therefore is not include in * the returned amount. */ RTDECL(int) RTSystemQueryUnavailableRam(uint64_t *pcb); /** * The DMI strings. */ typedef enum RTSYSDMISTR { /** Invalid zero entry. */ RTSYSDMISTR_INVALID = 0, /** The product name. */ RTSYSDMISTR_PRODUCT_NAME, /** The product version. */ RTSYSDMISTR_PRODUCT_VERSION, /** The product UUID. */ RTSYSDMISTR_PRODUCT_UUID, /** The product serial. */ RTSYSDMISTR_PRODUCT_SERIAL, /** The system manufacturer. */ RTSYSDMISTR_MANUFACTURER, /** The end of the valid strings. */ RTSYSDMISTR_END, /** The usual 32-bit hack. */ RTSYSDMISTR_32_BIT_HACK = 0x7fffffff } RTSYSDMISTR; /** * Queries a DMI string. * * @returns IPRT status code. * @retval VINF_SUCCESS on success. * @retval VERR_BUFFER_OVERFLOW if the buffer is too small. The buffer will * contain the chopped off result in this case, provided cbBuf isn't 0. * @retval VERR_ACCESS_DENIED if the information isn't accessible to the * caller. * @retval VERR_NOT_SUPPORTED if the information isn't available on the system * in general. The caller must expect this status code and deal with * it. * * @param enmString Which string to query. * @param pszBuf Where to store the string. This is always * terminated, even on error. * @param cbBuf The buffer size. */ RTDECL(int) RTSystemQueryDmiString(RTSYSDMISTR enmString, char *pszBuf, size_t cbBuf); /** @name Flags for RTSystemReboot and RTSystemShutdown. * @{ */ /** Reboot the system after shutdown. */ #define RTSYSTEM_SHUTDOWN_REBOOT UINT32_C(0) /** Reboot the system after shutdown. * The call may return VINF_SYS_MAY_POWER_OFF if the OS / * hardware combination may power off instead of halting. */ #define RTSYSTEM_SHUTDOWN_HALT UINT32_C(1) /** Power off the system after shutdown. * This may be equvivalent to a RTSYSTEM_SHUTDOWN_HALT on systems where we * cannot figure out whether the hardware/OS implements the actual powering * off. If we can figure out that it's not supported, an * VERR_SYS_CANNOT_POWER_OFF error is raised. */ #define RTSYSTEM_SHUTDOWN_POWER_OFF UINT32_C(2) /** Power off the system after shutdown, or halt it if that's not possible. */ #define RTSYSTEM_SHUTDOWN_POWER_OFF_HALT UINT32_C(3) /** The shutdown action mask. */ #define RTSYSTEM_SHUTDOWN_ACTION_MASK UINT32_C(3) /** Unplanned shutdown/reboot. */ #define RTSYSTEM_SHUTDOWN_UNPLANNED UINT32_C(0) /** Planned shutdown/reboot. */ #define RTSYSTEM_SHUTDOWN_PLANNED RT_BIT_32(2) /** Force the system to shutdown/reboot regardless of objecting application * or other stuff. This flag might not be realized on all systems. */ #define RTSYSTEM_SHUTDOWN_FORCE RT_BIT_32(3) /** Parameter validation mask. */ #define RTSYSTEM_SHUTDOWN_VALID_MASK UINT32_C(0x0000000f) /** @} */ /** * Shuts down the system. * * @returns IPRT status code on failure, on success it may or may not return * depending on the OS. * @retval VINF_SUCCESS * @retval VINF_SYS_MAY_POWER_OFF * @retval VERR_SYS_SHUTDOWN_FAILED * @retval VERR_SYS_CANNOT_POWER_OFF * * @param cMsDelay The delay before the actual reboot. If this is * not supported by the OS, an immediate reboot * will be performed. * @param fFlags Shutdown flags, see RTSYSTEM_SHUTDOWN_XXX. * @param pszLogMsg Message for the log and users about why we're * shutting down. */ RTDECL(int) RTSystemShutdown(RTMSINTERVAL cMsDelay, uint32_t fFlags, const char *pszLogMsg); /** @} */ RT_C_DECLS_END #endif