VBoxDisplay.cpp@ 48070

Last change on this file since 48070 was 48070, checked in by vboxsync, 11 years ago
wddm,vboxtray: forward-port autoresize, multimon, and seamless fixes from 4.2 r87071, r87353, r87356, r87528, r87568, r87581, r87584, r87608, r87673, r87678, r87708, r87629, r87529; additional fixes
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 43.7 KB

Line
1	/* $Id: VBoxDisplay.cpp 48070 2013-08-26 18:13:22Z vboxsync $ */
2	/** @file
3	* VBoxSeamless - Display notifications.
4	*/
5
6	/*
7	* Copyright (C) 2006-2013 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17	#define _WIN32_WINNT 0x0500
18	#include "VBoxTray.h"
19	#include "VBoxHelpers.h"
20	#include "VBoxSeamless.h"
21	#include <VBoxHook.h>
22	#include <VBoxDisplay.h>
23	#include <VBox/VMMDev.h>
24	#include <iprt/assert.h>
25	#include <malloc.h>
26	#include <VBoxGuestInternal.h>
27	#ifdef VBOX_WITH_WDDM
28	#include <iprt/asm.h>
29	#endif
30
31	typedef struct _VBOXDISPLAYCONTEXT
32	{
33	const VBOXSERVICEENV *pEnv;
34
35	BOOL fAnyX;
36
37	/* ChangeDisplaySettingsEx does not exist in NT. ResizeDisplayDevice uses the function. */
38	LONG (WINAPI * pfnChangeDisplaySettingsEx)(LPCTSTR lpszDeviceName, LPDEVMODE lpDevMode, HWND hwnd, DWORD dwflags, LPVOID lParam);
39
40	/* EnumDisplayDevices does not exist in NT. isVBoxDisplayDriverActive et al. are using these functions. */
41	BOOL (WINAPI * pfnEnumDisplayDevices)(IN LPCSTR lpDevice, IN DWORD iDevNum, OUT PDISPLAY_DEVICEA lpDisplayDevice, IN DWORD dwFlags);
42	} VBOXDISPLAYCONTEXT;
43
44	static VBOXDISPLAYCONTEXT gCtx = {0};
45
46	#ifdef VBOX_WITH_WDDM
47	typedef enum
48	{
49	VBOXDISPLAY_DRIVER_TYPE_UNKNOWN = 0,
50	VBOXDISPLAY_DRIVER_TYPE_XPDM = 1,
51	VBOXDISPLAY_DRIVER_TYPE_WDDM = 2
52	} VBOXDISPLAY_DRIVER_TYPE;
53
54	static VBOXDISPLAY_DRIVER_TYPE getVBoxDisplayDriverType (VBOXDISPLAYCONTEXT *pCtx);
55	#endif
56
57	int VBoxDisplayInit(const VBOXSERVICEENV pEnv, void ppInstance, bool pfStartThread)
58	{
59	Log(("VBoxTray: VBoxDisplayInit ...\n"));
60
61	OSVERSIONINFO OSinfo;
62	OSinfo.dwOSVersionInfoSize = sizeof (OSinfo);
63	GetVersionEx (&OSinfo);
64
65	HMODULE hUser = GetModuleHandle("user32.dll");
66
67	gCtx.pEnv = pEnv;
68
69	if (NULL == hUser)
70	{
71	Log(("VBoxTray: VBoxDisplayInit: Could not get module handle of USER32.DLL!\n"));
72	return VERR_NOT_IMPLEMENTED;
73	}
74	else if (OSinfo.dwMajorVersion >= 5) /* APIs available only on W2K and up! */
75	{
76	(uintptr_t )&gCtx.pfnChangeDisplaySettingsEx = (uintptr_t)GetProcAddress(hUser, "ChangeDisplaySettingsExA");
77	Log(("VBoxTray: VBoxDisplayInit: pfnChangeDisplaySettingsEx = %p\n", gCtx.pfnChangeDisplaySettingsEx));
78
79	(uintptr_t )&gCtx.pfnEnumDisplayDevices = (uintptr_t)GetProcAddress(hUser, "EnumDisplayDevicesA");
80	Log(("VBoxTray: VBoxDisplayInit: pfnEnumDisplayDevices = %p\n", gCtx.pfnEnumDisplayDevices));
81
82	#ifdef VBOX_WITH_WDDM
83	if (OSinfo.dwMajorVersion >= 6)
84	{
85	/* this is vista and up, check if we need to switch the display driver if to WDDM mode */
86	Log(("VBoxTray: VBoxDisplayInit: this is Windows Vista and up\n"));
87	VBOXDISPLAY_DRIVER_TYPE enmType = getVBoxDisplayDriverType (&gCtx);
88	if (enmType == VBOXDISPLAY_DRIVER_TYPE_WDDM)
89	{
90	Log(("VBoxTray: VBoxDisplayInit: WDDM driver is installed, switching display driver if to WDDM mode\n"));
91	/* this is hacky, but the most easiest way */
92	VBOXDISPIF_MODE enmMode = (OSinfo.dwMajorVersion > 6 \|\| OSinfo.dwMinorVersion > 0) ? VBOXDISPIF_MODE_WDDM_W7 : VBOXDISPIF_MODE_WDDM;
93	DWORD err = VBoxDispIfSwitchMode(const_cast<PVBOXDISPIF>(&pEnv->dispIf), enmMode, NULL /* old mode, we don't care about it */);
94	if (err == NO_ERROR)
95	Log(("VBoxTray: VBoxDisplayInit: DispIf switched to WDDM mode successfully\n"));
96	else
97	Log(("VBoxTray: VBoxDisplayInit: Failed to switch DispIf to WDDM mode, err (%d)\n", err));
98	}
99	}
100	#endif
101	}
102	else if (OSinfo.dwMajorVersion <= 4) /* Windows NT 4.0 */
103	{
104	/* Nothing to do here yet */
105	}
106	else /* Unsupported platform */
107	{
108	Log(("VBoxTray: VBoxDisplayInit: Warning, display for platform not handled yet!\n"));
109	return VERR_NOT_IMPLEMENTED;
110	}
111
112	VBOXDISPIFESCAPE_ISANYX IsAnyX = {0};
113	IsAnyX.EscapeHdr.escapeCode = VBOXESC_ISANYX;
114	DWORD err = VBoxDispIfEscapeInOut(&pEnv->dispIf, &IsAnyX.EscapeHdr, sizeof (uint32_t));
115	if (err == NO_ERROR)
116	gCtx.fAnyX = !!IsAnyX.u32IsAnyX;
117	else
118	gCtx.fAnyX = TRUE;
119
120	Log(("VBoxTray: VBoxDisplayInit: Display init successful\n"));
121
122	*pfStartThread = true;
123	ppInstance = (void )&gCtx;
124	return VINF_SUCCESS;
125	}
126
127	void VBoxDisplayDestroy (const VBOXSERVICEENV pEnv, void pInstance)
128	{
129	return;
130	}
131
132	#ifdef VBOX_WITH_WDDM
133	static VBOXDISPLAY_DRIVER_TYPE getVBoxDisplayDriverType(VBOXDISPLAYCONTEXT *pCtx)
134	#else
135	static bool isVBoxDisplayDriverActive(VBOXDISPLAYCONTEXT *pCtx)
136	#endif
137	{
138	#ifdef VBOX_WITH_WDDM
139	VBOXDISPLAY_DRIVER_TYPE enmType = VBOXDISPLAY_DRIVER_TYPE_UNKNOWN;
140	#else
141	bool result = false;
142	#endif
143
144	if( pCtx->pfnEnumDisplayDevices )
145	{
146	INT devNum = 0;
147	DISPLAY_DEVICE dispDevice;
148	FillMemory(&dispDevice, sizeof(DISPLAY_DEVICE), 0);
149	dispDevice.cb = sizeof(DISPLAY_DEVICE);
150
151	Log(("VBoxTray: isVBoxDisplayDriverActive: Checking for active VBox display driver (W2K+) ...\n"));
152
153	while (EnumDisplayDevices(NULL,
154	devNum,
155	&dispDevice,
156	0))
157	{
158	Log(("VBoxTray: isVBoxDisplayDriverActive: DevNum:%d\nName:%s\nString:%s\nID:%s\nKey:%s\nFlags=%08X\n\n",
159	devNum,
160	&dispDevice.DeviceName[0],
161	&dispDevice.DeviceString[0],
162	&dispDevice.DeviceID[0],
163	&dispDevice.DeviceKey[0],
164	dispDevice.StateFlags));
165
166	if (dispDevice.StateFlags & DISPLAY_DEVICE_PRIMARY_DEVICE)
167	{
168	Log(("VBoxTray: isVBoxDisplayDriverActive: Primary device\n"));
169
170	if (strcmp(&dispDevice.DeviceString[0], "VirtualBox Graphics Adapter") == 0)
171	#ifndef VBOX_WITH_WDDM
172	result = true;
173	#else
174	enmType = VBOXDISPLAY_DRIVER_TYPE_XPDM;
175	/* WDDM driver can now have multiple incarnations,
176	* if the driver name contains VirtualBox, and does NOT match the XPDM name,
177	* assume it to be WDDM */
178	else if (strstr(&dispDevice.DeviceString[0], "VirtualBox"))
179	enmType = VBOXDISPLAY_DRIVER_TYPE_WDDM;
180	#endif
181	break;
182	}
183
184	FillMemory(&dispDevice, sizeof(DISPLAY_DEVICE), 0);
185
186	dispDevice.cb = sizeof(DISPLAY_DEVICE);
187
188	devNum++;
189	}
190	}
191	else /* This must be NT 4 or something really old, so don't use EnumDisplayDevices() here ... */
192	{
193	Log(("VBoxTray: isVBoxDisplayDriverActive: Checking for active VBox display driver (NT or older) ...\n"));
194
195	DEVMODE tempDevMode;
196	ZeroMemory (&tempDevMode, sizeof (tempDevMode));
197	tempDevMode.dmSize = sizeof(DEVMODE);
198	EnumDisplaySettings(NULL, ENUM_CURRENT_SETTINGS, &tempDevMode); /* Get current display device settings */
199
200	/* Check for the short name, because all long stuff would be truncated */
201	if (strcmp((char*)&tempDevMode.dmDeviceName[0], "VBoxDisp") == 0)
202	#ifndef VBOX_WITH_WDDM
203	result = true;
204	#else
205	enmType = VBOXDISPLAY_DRIVER_TYPE_XPDM;
206	#endif
207	}
208
209	#ifndef VBOX_WITH_WDDM
210	return result;
211	#else
212	return enmType;
213	#endif
214	}
215
216	DWORD EnableAndResizeDispDev(DEVMODE paDeviceModes, DISPLAY_DEVICE paDisplayDevices, DWORD totalDispNum, UINT Id, DWORD aWidth, DWORD aHeight,
217	DWORD aBitsPerPixel, DWORD aPosX, DWORD aPosY, BOOL fEnabled, BOOL fExtDispSup)
218	{
219	DISPLAY_DEVICE displayDeviceTmp;
220	DISPLAY_DEVICE displayDevice;
221	DEVMODE deviceMode;
222	DWORD dwStatus = DISP_CHANGE_SUCCESSFUL;
223	DWORD iter ;
224
225	deviceMode = paDeviceModes[Id];
226	displayDevice = paDisplayDevices[Id];
227
228	for (iter = 0; iter < totalDispNum; iter++)
229	{
230	if (iter != 0 && iter != Id && !(paDisplayDevices[iter].StateFlags & DISPLAY_DEVICE_ACTIVE))
231	{
232	LogRel(("VBoxTray:Initially disabling the monitor with id = %d . Total Monitor=%d\n", iter, totalDispNum));
233	DEVMODE deviceModeTmp;
234	ZeroMemory(&deviceModeTmp, sizeof(DEVMODE));
235	deviceModeTmp.dmSize = sizeof(DEVMODE);
236	deviceModeTmp.dmFields = DM_PELSWIDTH \| DM_PELSHEIGHT \| DM_BITSPERPEL \| DM_POSITION
237	\| DM_DISPLAYFREQUENCY \| DM_DISPLAYFLAGS ;
238	displayDeviceTmp = paDisplayDevices[iter];
239	gCtx.pfnChangeDisplaySettingsEx(displayDeviceTmp.DeviceName, &deviceModeTmp, NULL,
240	(CDS_UPDATEREGISTRY \| CDS_NORESET), NULL);
241	}
242	}
243
244	if (fExtDispSup) /* Extended Display Support possible*/
245	{
246	if (fEnabled)
247	{
248	/* Special case for enabling the secondary monitor. */
249	if(!(displayDevice.StateFlags & DISPLAY_DEVICE_ACTIVE))
250	{
251	LogRel(("VBoxTray: Secondary Monitor with ID=%d and name=%s Not Enabled. Enabling it.\n", Id, displayDevice.DeviceName));
252	deviceMode.dmPosition.x = paDeviceModes[0].dmPelsWidth;
253	deviceMode.dmPosition.y = 0;
254	deviceMode.dmBitsPerPel = 32;
255	OSVERSIONINFO OSinfo;
256	OSinfo.dwOSVersionInfoSize = sizeof (OSinfo);
257	GetVersionEx (&OSinfo);
258
259	if (OSinfo.dwMajorVersion < 6)
260	/* dont any more flags here as, only DM_POISITON is used to enable the secondary display */
261	deviceMode.dmFields = DM_POSITION;
262	else /* for win 7 and above */
263	/* for vista and aboce DM_BITSPERPELis necessary */
264	deviceMode.dmFields = DM_BITSPERPEL \| DM_DISPLAYFLAGS \| DM_DISPLAYFREQUENCY \| DM_POSITION;
265
266	dwStatus = gCtx.pfnChangeDisplaySettingsEx((LPSTR)displayDevice.DeviceName,&deviceMode, NULL, (CDS_UPDATEREGISTRY \| CDS_NORESET), NULL);
267	/* A second call to ChangeDisplaySettings updates the monitor.*/
268	gCtx.pfnChangeDisplaySettingsEx(NULL, NULL, NULL,0, NULL);
269	}
270	else /* secondary monitor already enabled. Request to change the resolution or position. */
271	{
272	if (aWidth !=0 && aHeight != 0)
273	{
274	LogRel(("VBoxTray: Display : %s , Change Height: %d & Width: %d\n", displayDevice.DeviceName, aWidth, aHeight));
275	deviceMode.dmFields = DM_PELSWIDTH \| DM_PELSHEIGHT \| DM_BITSPERPEL
276	\| DM_DISPLAYFREQUENCY \| DM_DISPLAYFLAGS;
277	deviceMode.dmPelsWidth = aWidth;
278	deviceMode.dmPelsHeight = aHeight;
279	deviceMode.dmBitsPerPel = aBitsPerPixel;
280	}
281	if (aPosX != 0 \|\| aPosY != 0)
282	{
283	LogRel(("VBoxTray: Display: %s PosX: %d, PosY: %d\n", displayDevice.DeviceName, aPosX, aPosY));
284	deviceMode.dmFields \|= DM_POSITION;
285	deviceMode.dmPosition.x = aPosX;
286	deviceMode.dmPosition.y = aPosY;
287	}
288	dwStatus = gCtx.pfnChangeDisplaySettingsEx((LPSTR)displayDevice.DeviceName,
289	&deviceMode, NULL, CDS_NORESET\|CDS_UPDATEREGISTRY, NULL);
290	/* A second call to ChangeDisplaySettings updates the monitor. */
291	gCtx.pfnChangeDisplaySettingsEx(NULL, NULL, NULL,0, NULL);
292	}
293	}
294	else /* Request is there to disable the monitor with ID = Id*/
295	{
296	LogRel(("VBoxTray: Disable the Display: %d\n", displayDevice.DeviceName));
297
298	DEVMODE deviceModeTmp;
299	ZeroMemory(&deviceModeTmp, sizeof(DEVMODE));
300	deviceModeTmp.dmSize = sizeof(DEVMODE);
301	deviceModeTmp.dmFields = DM_PELSWIDTH \| DM_PELSHEIGHT \| DM_BITSPERPEL \| DM_POSITION
302	\| DM_DISPLAYFREQUENCY \| DM_DISPLAYFLAGS ;
303	displayDeviceTmp = paDisplayDevices[Id];
304	dwStatus = gCtx.pfnChangeDisplaySettingsEx(displayDeviceTmp.DeviceName, &deviceModeTmp, NULL,
305	(CDS_UPDATEREGISTRY \| CDS_NORESET), NULL);
306	gCtx.pfnChangeDisplaySettingsEx(NULL, NULL, NULL,0, NULL);
307	}
308	}
309	return dwStatus;
310	}
311
312	DWORD VBoxGetDisplayConfigCount()
313	{
314	DISPLAY_DEVICE DisplayDevice;
315
316	ZeroMemory(&DisplayDevice, sizeof(DISPLAY_DEVICE));
317	DisplayDevice.cb = sizeof(DISPLAY_DEVICE);
318
319	/* Find out how many display devices the system has */
320	DWORD NumDevices = 0;
321	DWORD i = 0;
322	while (EnumDisplayDevices (NULL, i, &DisplayDevice, 0))
323	{
324	Log(("VBoxTray: ResizeDisplayDevice: [%d] %s\n", i, DisplayDevice.DeviceName));
325
326	if (DisplayDevice.StateFlags & DISPLAY_DEVICE_PRIMARY_DEVICE)
327	{
328	Log(("VBoxTray: ResizeDisplayDevice: Found primary device. err %d\n", GetLastError ()));
329	NumDevices++;
330	}
331	else if (!(DisplayDevice.StateFlags & DISPLAY_DEVICE_MIRRORING_DRIVER))
332	{
333
334	Log(("VBoxTray: ResizeDisplayDevice: Found secondary device. err %d\n", GetLastError ()));
335	NumDevices++;
336	}
337
338	ZeroMemory(&DisplayDevice, sizeof(DisplayDevice));
339	DisplayDevice.cb = sizeof(DisplayDevice);
340	i++;
341	}
342
343	return NumDevices;
344	}
345
346	DWORD VBoxGetDisplayConfig(const DWORD NumDevices, DWORD pDevPrimaryNum, DWORD pNumDevices, DISPLAY_DEVICE paDisplayDevices, DEVMODE paDeviceModes)
347	{
348	/* Fetch information about current devices and modes. */
349	DWORD DevNum = 0;
350	DWORD DevPrimaryNum = 0;
351
352	DISPLAY_DEVICE DisplayDevice;
353
354	ZeroMemory(&DisplayDevice, sizeof(DISPLAY_DEVICE));
355	DisplayDevice.cb = sizeof(DISPLAY_DEVICE);
356
357	DWORD i = 0;
358	while (EnumDisplayDevices (NULL, i, &DisplayDevice, 0))
359	{
360	Log(("VBoxTray: ResizeDisplayDevice: [%d(%d)] %s\n", i, DevNum, DisplayDevice.DeviceName));
361
362	BOOL bFetchDevice = FALSE;
363
364	if (DisplayDevice.StateFlags & DISPLAY_DEVICE_PRIMARY_DEVICE)
365	{
366	Log(("VBoxTray: ResizeDisplayDevice: Found primary device. err %d\n", GetLastError ()));
367	DevPrimaryNum = DevNum;
368	bFetchDevice = TRUE;
369	}
370	else if (!(DisplayDevice.StateFlags & DISPLAY_DEVICE_MIRRORING_DRIVER))
371	{
372
373	Log(("VBoxTray: ResizeDisplayDevice: Found secondary device. err %d\n", GetLastError ()));
374	bFetchDevice = TRUE;
375	}
376
377	if (bFetchDevice)
378	{
379	if (DevNum >= NumDevices)
380	{
381	WARN(("VBoxTray: ResizeDisplayDevice: %d >= %d\n", NumDevices, DevNum));
382	return ERROR_BUFFER_OVERFLOW;
383	}
384
385	paDisplayDevices[DevNum] = DisplayDevice;
386
387	/* First try to get the video mode stored in registry (ENUM_REGISTRY_SETTINGS).
388	* A secondary display could be not active at the moment and would not have
389	* a current video mode (ENUM_CURRENT_SETTINGS).
390	*/
391	ZeroMemory(&paDeviceModes[DevNum], sizeof(DEVMODE));
392	paDeviceModes[DevNum].dmSize = sizeof(DEVMODE);
393	if (!EnumDisplaySettings((LPSTR)DisplayDevice.DeviceName,
394	ENUM_REGISTRY_SETTINGS, &paDeviceModes[DevNum]))
395	{
396	Log(("VBoxTray: ResizeDisplayDevice: EnumDisplaySettings error %d\n", GetLastError ()));
397	}
398
399	if ( paDeviceModes[DevNum].dmPelsWidth == 0
400	\|\| paDeviceModes[DevNum].dmPelsHeight == 0)
401	{
402	/* No ENUM_REGISTRY_SETTINGS yet. Seen on Vista after installation.
403	* Get the current video mode then.
404	*/
405	ZeroMemory(&paDeviceModes[DevNum], sizeof(DEVMODE));
406	paDeviceModes[DevNum].dmSize = sizeof(DEVMODE);
407	if (!EnumDisplaySettings((LPSTR)DisplayDevice.DeviceName,
408	ENUM_CURRENT_SETTINGS, &paDeviceModes[DevNum]))
409	{
410	/* ENUM_CURRENT_SETTINGS returns FALSE when the display is not active:
411	* for example a disabled secondary display.
412	* Do not return here, ignore the error and set the display info to 0x0x0.
413	*/
414	Log(("VBoxTray: ResizeDisplayDevice: EnumDisplaySettings(ENUM_CURRENT_SETTINGS) error %d\n", GetLastError ()));
415	}
416	}
417
418
419	DevNum++;
420	}
421
422	ZeroMemory(&DisplayDevice, sizeof(DISPLAY_DEVICE));
423	DisplayDevice.cb = sizeof(DISPLAY_DEVICE);
424	i++;
425	}
426
427	*pNumDevices = DevNum;
428
429	return NO_ERROR;
430	}
431
432	/* Returns TRUE to try again. */
433	static BOOL ResizeDisplayDevice(UINT Id, DWORD Width, DWORD Height, DWORD BitsPerPixel,
434	BOOL fEnabled, DWORD dwNewPosX, DWORD dwNewPosY,
435	VBOXDISPLAYCONTEXT *pCtx, BOOL fExtDispSup)
436	{
437	BOOL fDispAlreadyEnabled = false; /* check whether the monitor with ID is already enabled. */
438	BOOL fModeReset = (Width == 0 && Height == 0 && BitsPerPixel == 0 &&
439	dwNewPosX == 0 && dwNewPosY == 0);
440	DWORD dmFields = 0;
441
442	Log(("VBoxTray: ResizeDisplayDevice Width= %d, Height=%d , PosX=%d and PosY=%d \
443	fEnabled = %d, fExtDisSup = %d\n",
444	Width, Height, dwNewPosX, dwNewPosY, fEnabled, fExtDispSup));
445
446	if (!gCtx.fAnyX)
447	Width &= 0xFFF8;
448
449	VBoxDispIfCancelPendingResize(&pCtx->pEnv->dispIf);
450
451	DWORD NumDevices = VBoxGetDisplayConfigCount();
452
453	if (NumDevices == 0 \|\| Id >= NumDevices)
454	{
455	WARN(("VBoxTray: ResizeDisplayDevice: Requested identifier %d is invalid. err %d\n", Id, GetLastError ()));
456	return FALSE;
457	}
458
459	Log(("VBoxTray: ResizeDisplayDevice: Found total %d devices. err %d\n", NumDevices, GetLastError ()));
460
461	DISPLAY_DEVICE paDisplayDevices = (DISPLAY_DEVICE )alloca (sizeof (DISPLAY_DEVICE) * NumDevices);
462	DEVMODE paDeviceModes = (DEVMODE )alloca (sizeof (DEVMODE) * NumDevices);
463	RECTL paRects = (RECTL )alloca (sizeof (RECTL) * NumDevices);
464	DWORD DevNum = 0;
465	DWORD DevPrimaryNum = 0;
466	DWORD dwStatus = VBoxGetDisplayConfig(NumDevices, &DevPrimaryNum, &DevNum, paDisplayDevices, paDeviceModes);
467	if (dwStatus != NO_ERROR)
468	{
469	WARN(("VBoxTray: ResizeDisplayDevice: VBoxGetDisplayConfig failed, %d\n", dwStatus));
470	return dwStatus;
471	}
472
473	if (NumDevices != DevNum)
474	WARN(("VBoxTray: ResizeDisplayDevice: NumDevices(%d) != DevNum(%d)\n", NumDevices, DevNum));
475
476	DWORD i = 0;
477
478	for (i = 0; i < DevNum; ++i)
479	{
480	if (fExtDispSup)
481	{
482	LogRel(("VBoxTray: Extended Display Support.\n"));
483	Log(("VBoxTray: ResizeDisplayDevice1: %dx%dx%d at %d,%d . Id = %d and DevNum=%d, fEnabled=%d\n",
484	paDeviceModes[Id].dmPelsWidth,
485	paDeviceModes[Id].dmPelsHeight,
486	paDeviceModes[Id].dmBitsPerPel,
487	paDeviceModes[Id].dmPosition.x,
488	paDeviceModes[Id].dmPosition.y,
489	Id, DevNum, fEnabled));
490	}
491	else
492	{
493	LogRel(("VBoxTray: NO Ext Display Support \n"));
494	}
495
496	paRects[i].left = paDeviceModes[i].dmPosition.x;
497	paRects[i].top = paDeviceModes[i].dmPosition.y;
498	paRects[i].right = paDeviceModes[i].dmPosition.x + paDeviceModes[i].dmPelsWidth;
499	paRects[i].bottom = paDeviceModes[i].dmPosition.y + paDeviceModes[i].dmPelsHeight;
500	}
501
502	/* Keep a record if the display with ID is already active or not. */
503	if (paDisplayDevices[Id].StateFlags & DISPLAY_DEVICE_ACTIVE)
504	{
505	LogRel(("VBoxTray: Display with ID=%d already enabled\n", Id));
506	fDispAlreadyEnabled = TRUE;
507	}
508
509	/* Width, height equal to 0 means that this value must be not changed.
510	* Update input parameters if necessary.
511	* Note: BitsPerPixel is taken into account later, when new rectangles
512	* are assigned to displays.
513	*/
514	if (Width == 0)
515	Width = paRects[Id].right - paRects[Id].left;
516	else
517	dmFields \|= DM_PELSWIDTH;
518
519	if (Height == 0)
520	Height = paRects[Id].bottom - paRects[Id].top;
521	else
522	dmFields \|= DM_PELSHEIGHT;
523
524	if (BitsPerPixel == 0)
525	BitsPerPixel = paDeviceModes[Id].dmBitsPerPel;
526	else
527	dmFields \|= DM_BITSPERPEL;
528
529	if (!dwNewPosX && !dwNewPosY)
530	{
531	/* @fixme: zero position is a valid state, so another values should be used as a special case !!! */
532	dwNewPosX = paRects[Id].left;
533	dwNewPosY = paRects[Id].top;
534	}
535	else
536	dmFields \|= DM_POSITION;
537
538	/* Check whether a mode reset or a change is requested.
539	* Rectangle position is recalculated only if fEnabled is 1.
540	* For non extended supported modes (old Host VMs), fEnabled
541	* is always 1.
542	*/
543	/* Handled the case where previouseresolution of secondary monitor
544	* was for eg. 102476832 and monitor was in disabled state.
545	* User gives the command
546	* setvideomode 1024 768 32 1 yes.
547	* Now in this case the resolution request is same as previous one but
548	* monitor is going from disabled to enabled state so the below condition
549	* shour return false
550	* The below condition will only return true , if no mode reset has
551	* been requested AND fEnabled is 1 and fDispAlreadyEnabled is also 1 AND
552	* all rect conditions are true. Thus in this case nothing has to be done.
553	*/
554	if ( !fModeReset && (!fEnabled == !fDispAlreadyEnabled)
555	&& paRects[Id].left == dwNewPosX
556	&& paRects[Id].top == dwNewPosY
557	&& paRects[Id].right - paRects[Id].left == Width
558	&& paRects[Id].bottom - paRects[Id].top == Height
559	&& paDeviceModes[Id].dmBitsPerPel == BitsPerPixel)
560	{
561	LogRel(("VBoxTray: Already at desired resolution. No Change.\n"));
562	return FALSE;
563	}
564
565	hlpResizeRect(paRects, NumDevices, DevPrimaryNum, Id,
566	fEnabled ? Width : 0, fEnabled ? Height : 0, dwNewPosX, dwNewPosY);
567	#ifdef Log
568	for (i = 0; i < NumDevices; i++)
569	{
570	Log(("VBoxTray: ResizeDisplayDevice: [%d]: %d,%d %dx%d\n",
571	i, paRects[i].left, paRects[i].top,
572	paRects[i].right - paRects[i].left,
573	paRects[i].bottom - paRects[i].top));
574	}
575	#endif /* Log */
576
577	#ifdef VBOX_WITH_WDDM
578	VBOXDISPLAY_DRIVER_TYPE enmDriverType = getVBoxDisplayDriverType (pCtx);
579	if (enmDriverType == VBOXDISPLAY_DRIVER_TYPE_WDDM)
580	{
581	/* Assign the new rectangles to displays. */
582	for (i = 0; i < NumDevices; i++)
583	{
584	paDeviceModes[i].dmPosition.x = paRects[i].left;
585	paDeviceModes[i].dmPosition.y = paRects[i].top;
586	paDeviceModes[i].dmPelsWidth = paRects[i].right - paRects[i].left;
587	paDeviceModes[i].dmPelsHeight = paRects[i].bottom - paRects[i].top;
588
589	if (i == Id)
590	paDeviceModes[i].dmBitsPerPel = BitsPerPixel;
591
592	paDeviceModes[i].dmFields \|= dmFields;
593
594	/* On Vista one must specify DM_BITSPERPEL.
595	* Note that the current mode dmBitsPerPel is already in the DEVMODE structure.
596	*/
597	if (!(paDeviceModes[i].dmFields & DM_BITSPERPEL))
598	{
599	WARN(("VBoxTray: (WDDM) no DM_BITSPERPEL\n"));
600	paDeviceModes[i].dmFields \|= DM_BITSPERPEL;
601	paDeviceModes[i].dmBitsPerPel = 32;
602	}
603
604	Log(("VBoxTray: (WDDM) ResizeDisplayDevice: pfnChangeDisplaySettingsEx %x: %dx%dx%d at %d,%d\n",
605	gCtx.pfnChangeDisplaySettingsEx,
606	paDeviceModes[i].dmPelsWidth,
607	paDeviceModes[i].dmPelsHeight,
608	paDeviceModes[i].dmBitsPerPel,
609	paDeviceModes[i].dmPosition.x,
610	paDeviceModes[i].dmPosition.y));
611	}
612
613	Log(("VBoxTray: (WDDM) Request to resize the displa\n"));
614	DWORD err = VBoxDispIfResizeModes(&pCtx->pEnv->dispIf, Id, fEnabled, fExtDispSup, paDisplayDevices, paDeviceModes, DevNum);
615	if (err == NO_ERROR \|\| err != ERROR_RETRY)
616	{
617	if (err == NO_ERROR)
618	Log(("VBoxTray: VBoxDisplayThread: (WDDM) VBoxDispIfResizeModes succeeded\n"));
619	else
620	WARN(("VBoxTray: VBoxDisplayThread: (WDDM) Failure VBoxDispIfResizeModes (%d)\n", err));
621	return FALSE;
622	}
623
624	Log(("VBoxTray: ResizeDisplayDevice: (WDDM) RETRY requested\n"));
625	return TRUE;
626	}
627	#endif
628	/* Without this, Windows will not ask the miniport for its
629	* mode table but uses an internal cache instead.
630	*/
631	for (i = 0; i < NumDevices; i++)
632	{
633	DEVMODE tempDevMode;
634	ZeroMemory (&tempDevMode, sizeof (tempDevMode));
635	tempDevMode.dmSize = sizeof(DEVMODE);
636	EnumDisplaySettings((LPSTR)paDisplayDevices[i].DeviceName, 0xffffff, &tempDevMode);
637	Log(("VBoxTray: ResizeDisplayDevice: EnumDisplaySettings last error %d\n", GetLastError ()));
638	}
639
640	/* Assign the new rectangles to displays. */
641	for (i = 0; i < NumDevices; i++)
642	{
643	paDeviceModes[i].dmPosition.x = paRects[i].left;
644	paDeviceModes[i].dmPosition.y = paRects[i].top;
645	paDeviceModes[i].dmPelsWidth = paRects[i].right - paRects[i].left;
646	paDeviceModes[i].dmPelsHeight = paRects[i].bottom - paRects[i].top;
647
648	/* On Vista one must specify DM_BITSPERPEL.
649	* Note that the current mode dmBitsPerPel is already in the DEVMODE structure.
650	*/
651	paDeviceModes[i].dmFields = DM_POSITION \| DM_PELSHEIGHT \| DM_PELSWIDTH \| DM_BITSPERPEL;
652
653	if ( i == Id
654	&& BitsPerPixel != 0)
655	{
656	/* Change dmBitsPerPel if requested. */
657	paDeviceModes[i].dmBitsPerPel = BitsPerPixel;
658	}
659
660	Log(("VBoxTray: ResizeDisplayDevice: pfnChangeDisplaySettingsEx Current MonitorId=%d: %dx%dx%d at %d,%d\n",
661	i,
662	paDeviceModes[i].dmPelsWidth,
663	paDeviceModes[i].dmPelsHeight,
664	paDeviceModes[i].dmBitsPerPel,
665	paDeviceModes[i].dmPosition.x,
666	paDeviceModes[i].dmPosition.y));
667
668	LONG status = gCtx.pfnChangeDisplaySettingsEx((LPSTR)paDisplayDevices[i].DeviceName,
669	&paDeviceModes[i], NULL, CDS_NORESET \| CDS_UPDATEREGISTRY, NULL);
670	Log(("VBoxTray: ResizeDisplayDevice: ChangeDisplaySettingsEx position status %d, err %d\n", status, GetLastError ()));
671	}
672
673	Log(("VBoxTray: Enable And Resize Device. Id = %d, Width=%d Height=%d, \
674	dwNewPosX = %d, dwNewPosY = %d fEnabled=%d & fExtDispSupport = %d \n",
675	Id, Width, Height, dwNewPosX, dwNewPosY, fEnabled, fExtDispSup));
676	dwStatus = EnableAndResizeDispDev(paDeviceModes, paDisplayDevices, DevNum, Id, Width, Height, BitsPerPixel,
677	dwNewPosX, dwNewPosY, fEnabled, fExtDispSup);
678	if (dwStatus == DISP_CHANGE_SUCCESSFUL \|\| dwStatus == DISP_CHANGE_BADMODE)
679	{
680	/* Successfully set new video mode or our driver can not set
681	* the requested mode. Stop trying.
682	*/
683	return FALSE;
684	}
685	/* Retry the request. */
686	return TRUE;
687	}
688
689	/**
690	* Thread function to wait for and process display change
691	* requests
692	*/
693	unsigned __stdcall VBoxDisplayThread(void *pInstance)
694	{
695	Log(("VBoxTray: VBoxDisplayThread: Entered\n"));
696
697	VBOXDISPLAYCONTEXT pCtx = (VBOXDISPLAYCONTEXT )pInstance;
698	HANDLE gVBoxDriver = pCtx->pEnv->hDriver;
699	bool fTerminate = false;
700	VBoxGuestFilterMaskInfo maskInfo;
701	DWORD cbReturned;
702
703	maskInfo.u32OrMask = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST \| VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED;
704	maskInfo.u32NotMask = 0;
705	if (!DeviceIoControl(gVBoxDriver, VBOXGUEST_IOCTL_CTL_FILTER_MASK, &maskInfo, sizeof (maskInfo), NULL, 0, &cbReturned, NULL))
706	{
707	Log(("VBoxTray: VBoxDisplayThread: DeviceIOControl(CtlMask - or) failed, thread exiting\n"));
708	return 0;
709	}
710
711	PostMessage(ghwndToolWindow, WM_VBOX_GRAPHICS_SUPPORTED, 0, 0);
712
713	VBoxDispIfResizeStarted(&pCtx->pEnv->dispIf);
714
715	do
716	{
717	BOOL fExtDispSup = TRUE;
718	/* Wait for a display change event. */
719	VBoxGuestWaitEventInfo waitEvent;
720	waitEvent.u32TimeoutIn = 1000;
721	waitEvent.u32EventMaskIn = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST \| VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED;
722	if (DeviceIoControl(gVBoxDriver, VBOXGUEST_IOCTL_WAITEVENT, &waitEvent, sizeof(waitEvent), &waitEvent, sizeof(waitEvent), &cbReturned, NULL))
723	{
724	/Log(("VBoxTray: VBoxDisplayThread: DeviceIOControl succeeded\n"));/
725
726	if (NULL == pCtx) {
727	Log(("VBoxTray: VBoxDisplayThread: Invalid context detected!\n"));
728	break;
729	}
730
731	if (NULL == pCtx->pEnv) {
732	Log(("VBoxTray: VBoxDisplayThread: Invalid context environment detected!\n"));
733	break;
734	}
735
736	/* are we supposed to stop? */
737	if (WaitForSingleObject(pCtx->pEnv->hStopEvent, 0) == WAIT_OBJECT_0)
738	break;
739
740	/Log(("VBoxTray: VBoxDisplayThread: checking event\n"));/
741
742	/* did we get the right event? */
743	if (waitEvent.u32EventFlagsOut & VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST)
744	{
745	Log(("VBoxTray: VBoxDisplayThread: going to get display change information\n"));
746	BOOL fDisplayChangeQueried;
747
748
749	/* We got at least one event. Read the requested resolution
750	* and try to set it until success. New events will not be seen
751	* but a new resolution will be read in this poll loop.
752	*/
753	/* Try if extended mode display information is available from the host. */
754	VMMDevDisplayChangeRequestEx displayChangeRequest = {0};
755	fExtDispSup = TRUE;
756	displayChangeRequest.header.size = sizeof(VMMDevDisplayChangeRequestEx);
757	displayChangeRequest.header.version = VMMDEV_REQUEST_HEADER_VERSION;
758	displayChangeRequest.header.requestType = VMMDevReq_GetDisplayChangeRequestEx;
759	displayChangeRequest.eventAck = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST;
760	fDisplayChangeQueried = DeviceIoControl(gVBoxDriver, VBOXGUEST_IOCTL_VMMREQUEST(sizeof(VMMDevDisplayChangeRequestEx)), &displayChangeRequest, sizeof(VMMDevDisplayChangeRequestEx),
761	&displayChangeRequest, sizeof(VMMDevDisplayChangeRequestEx), &cbReturned, NULL);
762
763	if (!fDisplayChangeQueried)
764	{
765	Log(("VBoxTray: Extended Display Not Supported. Trying VMMDevDisplayChangeRequest2\n"));
766	fExtDispSup = FALSE; /* Extended display Change request is not supported */
767
768	displayChangeRequest.header.size = sizeof(VMMDevDisplayChangeRequest2);
769	displayChangeRequest.header.version = VMMDEV_REQUEST_HEADER_VERSION;
770	displayChangeRequest.header.requestType = VMMDevReq_GetDisplayChangeRequest2;
771	displayChangeRequest.eventAck = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST;
772	fDisplayChangeQueried = DeviceIoControl(gVBoxDriver, VBOXGUEST_IOCTL_VMMREQUEST(sizeof(VMMDevDisplayChangeRequest2)), &displayChangeRequest, sizeof(VMMDevDisplayChangeRequest2),
773	&displayChangeRequest, sizeof(VMMDevDisplayChangeRequest2), &cbReturned, NULL);
774	displayChangeRequest.cxOrigin = 0;
775	displayChangeRequest.cyOrigin = 0;
776	displayChangeRequest.fChangeOrigin = 0;
777	displayChangeRequest.fEnabled = 1; /* Always Enabled for old VMs on Host.*/
778	}
779
780	if (!fDisplayChangeQueried)
781	{
782	Log(("VBoxTray: Extended Display Not Supported. Trying VMMDevDisplayChangeRequest\n"));
783	fExtDispSup = FALSE; /Extended display Change request is not supported /
784	/* Try the old version of the request for old VBox hosts. */
785	displayChangeRequest.header.size = sizeof(VMMDevDisplayChangeRequest);
786	displayChangeRequest.header.version = VMMDEV_REQUEST_HEADER_VERSION;
787	displayChangeRequest.header.requestType = VMMDevReq_GetDisplayChangeRequest;
788	displayChangeRequest.eventAck = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST;
789	fDisplayChangeQueried = DeviceIoControl(gVBoxDriver, VBOXGUEST_IOCTL_VMMREQUEST(sizeof(VMMDevDisplayChangeRequest)), &displayChangeRequest, sizeof(VMMDevDisplayChangeRequest),
790	&displayChangeRequest, sizeof(VMMDevDisplayChangeRequest), &cbReturned, NULL);
791	displayChangeRequest.display = 0;
792	displayChangeRequest.cxOrigin = 0;
793	displayChangeRequest.cyOrigin = 0;
794	displayChangeRequest.fChangeOrigin = 0;
795	displayChangeRequest.fEnabled = 1; /* Always Enabled for old VMs on Host.*/
796	}
797
798	if (fDisplayChangeQueried)
799	{
800	/* Try to set the requested video mode. Repeat until it is successful or is rejected by the driver. */
801	for (;;)
802	{
803	Log(("VBoxTray: VBoxDisplayThread: VMMDevReq_GetDisplayChangeRequest2: %dx%dx%d at %d\n", displayChangeRequest.xres, displayChangeRequest.yres, displayChangeRequest.bpp, displayChangeRequest.display));
804
805	/*
806	* Only try to change video mode if the active display driver is VBox additions.
807	*/
808	#ifdef VBOX_WITH_WDDM
809	VBOXDISPLAY_DRIVER_TYPE enmDriverType = getVBoxDisplayDriverType (pCtx);
810
811	if (enmDriverType == VBOXDISPLAY_DRIVER_TYPE_WDDM)
812	Log(("VBoxTray: VBoxDisplayThread: Detected WDDM Driver\n"));
813
814	if (enmDriverType != VBOXDISPLAY_DRIVER_TYPE_UNKNOWN)
815	#else
816	if (isVBoxDisplayDriverActive (pCtx))
817	#endif
818	{
819	Log(("VBoxTray: VBoxDisplayThread: Display driver is active!\n"));
820
821	if (pCtx->pfnChangeDisplaySettingsEx != 0)
822	{
823	Log(("VBoxTray: VBoxDisplayThread: Detected W2K or later\n"));
824	/* W2K or later. */
825	Log(("DisplayChangeReqEx parameters aDisplay=%d x xRes=%d x yRes=%d x bpp=%d x SecondayMonEnb=%d x NewOriginX=%d x NewOriginY=%d x ChangeOrigin=%d\n",
826	displayChangeRequest.display,
827	displayChangeRequest.xres,
828	displayChangeRequest.yres,
829	displayChangeRequest.bpp,
830	displayChangeRequest.fEnabled,
831	displayChangeRequest.cxOrigin,
832	displayChangeRequest.cyOrigin,
833	displayChangeRequest.fChangeOrigin));
834	if (!ResizeDisplayDevice(displayChangeRequest.display,
835	displayChangeRequest.xres,
836	displayChangeRequest.yres,
837	displayChangeRequest.bpp,
838	displayChangeRequest.fEnabled,
839	displayChangeRequest.cxOrigin,
840	displayChangeRequest.cyOrigin,
841	pCtx,
842	fExtDispSup
843	))
844	{
845	Log(("ResizeDipspalyDevice return 0\n"));
846	break;
847	}
848
849	}
850	else
851	{
852	Log(("VBoxTray: VBoxDisplayThread: Detected NT\n"));
853
854	/* Single monitor NT. */
855	DEVMODE devMode;
856	RT_ZERO(devMode);
857	devMode.dmSize = sizeof(DEVMODE);
858
859	/* get the current screen setup */
860	if (EnumDisplaySettings(NULL, ENUM_REGISTRY_SETTINGS, &devMode))
861	{
862	Log(("VBoxTray: VBoxDisplayThread: Current mode: %d x %d x %d at %d,%d\n",
863	devMode.dmPelsWidth, devMode.dmPelsHeight, devMode.dmBitsPerPel, devMode.dmPosition.x, devMode.dmPosition.y));
864
865	/* Check whether a mode reset or a change is requested. */
866	if (displayChangeRequest.xres \|\| displayChangeRequest.yres \|\| displayChangeRequest.bpp)
867	{
868	/* A change is requested.
869	* Set values which are not to be changed to the current values.
870	*/
871	if (!displayChangeRequest.xres)
872	displayChangeRequest.xres = devMode.dmPelsWidth;
873	if (!displayChangeRequest.yres)
874	displayChangeRequest.yres = devMode.dmPelsHeight;
875	if (!displayChangeRequest.bpp)
876	displayChangeRequest.bpp = devMode.dmBitsPerPel;
877	}
878	else
879	{
880	/* All zero values means a forced mode reset. Do nothing. */
881	Log(("VBoxTray: VBoxDisplayThread: Forced mode reset\n"));
882	}
883
884	/* Verify that the mode is indeed changed. */
885	if ( devMode.dmPelsWidth == displayChangeRequest.xres
886	&& devMode.dmPelsHeight == displayChangeRequest.yres
887	&& devMode.dmBitsPerPel == displayChangeRequest.bpp)
888	{
889	Log(("VBoxTray: VBoxDisplayThread: already at desired resolution\n"));
890	break;
891	}
892
893	// without this, Windows will not ask the miniport for its
894	// mode table but uses an internal cache instead
895	DEVMODE tempDevMode = {0};
896	tempDevMode.dmSize = sizeof(DEVMODE);
897	EnumDisplaySettings(NULL, 0xffffff, &tempDevMode);
898
899	/* adjust the values that are supposed to change */
900	if (displayChangeRequest.xres)
901	devMode.dmPelsWidth = displayChangeRequest.xres;
902	if (displayChangeRequest.yres)
903	devMode.dmPelsHeight = displayChangeRequest.yres;
904	if (displayChangeRequest.bpp)
905	devMode.dmBitsPerPel = displayChangeRequest.bpp;
906
907	Log(("VBoxTray: VBoxDisplayThread: setting new mode %d x %d, %d BPP\n",
908	devMode.dmPelsWidth, devMode.dmPelsHeight, devMode.dmBitsPerPel));
909
910	/* set the new mode */
911	LONG status = ChangeDisplaySettings(&devMode, CDS_UPDATEREGISTRY);
912	if (status != DISP_CHANGE_SUCCESSFUL)
913	{
914	Log(("VBoxTray: VBoxDisplayThread: error from ChangeDisplaySettings: %d\n", status));
915
916	if (status == DISP_CHANGE_BADMODE)
917	{
918	/* Our driver can not set the requested mode. Stop trying. */
919	break;
920	}
921	}
922	else
923	{
924	/* Successfully set new video mode. */
925	break;
926	}
927	}
928	else
929	{
930	Log(("VBoxTray: VBoxDisplayThread: error from EnumDisplaySettings: %d\n", GetLastError ()));
931	break;
932	}
933	}
934	}
935	else
936	{
937	Log(("VBoxTray: VBoxDisplayThread: vboxDisplayDriver is not active\n"));
938	}
939
940	/* Retry the change a bit later. */
941	/* are we supposed to stop? */
942	if (WaitForSingleObject(pCtx->pEnv->hStopEvent, 1000) == WAIT_OBJECT_0)
943	{
944	fTerminate = true;
945	break;
946	}
947	}
948	}
949	else
950	{
951	Log(("VBoxTray: VBoxDisplayThread: error from DeviceIoControl VBOXGUEST_IOCTL_VMMREQUEST\n"));
952	/* sleep a bit to not eat too much CPU while retrying */
953	/* are we supposed to stop? */
954	if (WaitForSingleObject(pCtx->pEnv->hStopEvent, 50) == WAIT_OBJECT_0)
955	{
956	fTerminate = true;
957	break;
958	}
959	}
960	}
961	if (waitEvent.u32EventFlagsOut & VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED)
962	hlpReloadCursor();
963	}
964	else
965	{
966	Log(("VBoxTray: VBoxDisplayThread: error 0 from DeviceIoControl VBOXGUEST_IOCTL_WAITEVENT\n"));
967	/* sleep a bit to not eat too much CPU in case the above call always fails */
968	if (WaitForSingleObject(pCtx->pEnv->hStopEvent, 10) == WAIT_OBJECT_0)
969	{
970	fTerminate = true;
971	break;
972	}
973	}
974	} while (!fTerminate);
975
976	/*
977	* Remove event filter and graphics capability report.
978	*/
979	maskInfo.u32OrMask = 0;
980	maskInfo.u32NotMask = VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST \| VMMDEV_EVENT_MOUSE_CAPABILITIES_CHANGED;
981	if (!DeviceIoControl(gVBoxDriver, VBOXGUEST_IOCTL_CTL_FILTER_MASK, &maskInfo, sizeof (maskInfo), NULL, 0, &cbReturned, NULL))
982	Log(("VBoxTray: VBoxDisplayThread: DeviceIOControl(CtlMask - not) failed\n"));
983	PostMessage(ghwndToolWindow, WM_VBOX_GRAPHICS_UNSUPPORTED, 0, 0);
984
985	Log(("VBoxTray: VBoxDisplayThread: finished display change request thread\n"));
986	return 0;
987	}

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Additions/WINNT/VBoxTray/VBoxDisplay.cpp@ 48070

Download in other formats: