DevPCI.cpp@ 24145

Last change on this file since 24145 was 24145, checked in by vboxsync, 15 years ago
DevPCI: Don't disable PCI device before the PCI state is being loaded.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 95.3 KB

Line
1	/* $Id: DevPCI.cpp 24145 2009-10-28 16:17:37Z vboxsync $ */
2	/** @file
3	* DevPCI - PCI BUS Device.
4	*/
5
6	/*
7	* Copyright (C) 2006-2007 Sun Microsystems, Inc.
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
18	* Clara, CA 95054 USA or visit http://www.sun.com if you need
19	* additional information or have any questions.
20	* --------------------------------------------------------------------
21	*
22	* This code is based on:
23	*
24	* QEMU PCI bus manager
25	*
26	* Copyright (c) 2004 Fabrice Bellard
27	*
28	* Permission is hereby granted, free of charge, to any person obtaining a copy
29	* of this software and associated documentation files (the "Software"), to deal
30	* in the Software without restriction, including without limitation the rights
31	* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
32	* copies of the Software, and to permit persons to whom the Software is
33	* furnished to do so, subject to the following conditions:
34	*
35	* The above copyright notice and this permission notice shall be included in
36	* all copies or substantial portions of the Software.
37	*
38	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
39	* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
40	* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
41	* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
42	* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
43	* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
44	* THE SOFTWARE.
45	*/
46
47	/*******************************************************************************
48	* Header Files *
49	*******************************************************************************/
50	#define LOG_GROUP LOG_GROUP_DEV_PCI
51	/* Hack to get PCIDEVICEINT declare at the right point - include "PCIInternal.h". */
52	#define PCI_INCLUDE_PRIVATE
53	#include <VBox/pci.h>
54	#include <VBox/pdmdev.h>
55	#include <iprt/assert.h>
56	#include <iprt/string.h>
57
58	#include "../Builtins.h"
59
60
61	/*******************************************************************************
62	* Structures and Typedefs *
63	*******************************************************************************/
64	/**
65	* PIIX3 ISA Bridge state.
66	*/
67	typedef struct PIIX3State
68	{
69	/** The PCI device of the bridge. */
70	PCIDEVICE dev;
71	} PIIX3State, PIIX3, *PPIIX3;
72
73	/**
74	* PCI Bus instance.
75	*/
76	typedef struct PCIBus
77	{
78	/** Bus number. */
79	int32_t iBus;
80	/** Start device number. */
81	int32_t iDevSearch;
82	/** Number of bridges attached to the bus. */
83	uint32_t cBridges;
84
85	uint32_t Alignment0;
86
87	/** Array of PCI devices. */
88	R3PTRTYPE(PPCIDEVICE) devices[256];
89	/** Array of bridges attached to the bus. */
90	R3PTRTYPE(PPCIDEVICE *) papBridgesR3;
91
92	/** R3 pointer to the device instance. */
93	PPDMDEVINSR3 pDevInsR3;
94	/** Pointer to the PCI R3 helpers. */
95	PCPDMPCIHLPR3 pPciHlpR3;
96
97	/** R0 pointer to the device instance. */
98	PPDMDEVINSR0 pDevInsR0;
99	/** Pointer to the PCI R0 helpers. */
100	PCPDMPCIHLPR0 pPciHlpR0;
101
102	/** RC pointer to the device instance. */
103	PPDMDEVINSRC pDevInsRC;
104	/** Pointer to the PCI RC helpers. */
105	PCPDMPCIHLPRC pPciHlpRC;
106
107	/** The PCI device for the PCI bridge. */
108	PCIDEVICE PciDev;
109
110	} PCIBUS;
111	/** Pointer to a PCIBUS instance. */
112	typedef PCIBUS *PPCIBUS;
113	typedef PCIBUS PCIBus;
114
115	/** @def PCI_IRQ_PINS
116	* Number of pins for interrupts (PIRQ#0...PIRQ#3)
117	*/
118	#define PCI_IRQ_PINS 4
119
120	/** @def PCI_APIC_IRQ_PINS
121	* Number of pins for interrupts if the APIC is used.
122	*/
123	#define PCI_APIC_IRQ_PINS 8
124
125	/**
126	* PCI Globals - This is the host-to-pci bridge and the root bus.
127	*/
128	typedef struct PCIGLOBALS
129	{
130	/** Irq levels for the four PCI Irqs.
131	* These count how many devices asserted
132	* the IRQ line. If greater 0 an IRQ is sent to the guest.
133	* If it drops to 0 the IRQ is deasserted.
134	*/
135	volatile uint32_t pci_irq_levels[PCI_IRQ_PINS];
136
137	#if 1 /* Will be moved into the BIOS soon. */
138	/** The next I/O port address which the PCI BIOS will use. */
139	uint32_t pci_bios_io_addr;
140	/** The next MMIO address which the PCI BIOS will use. */
141	uint32_t pci_bios_mem_addr;
142	/** Actual bus number. */
143	uint8_t uBus;
144	#endif
145
146	/** I/O APIC usage flag */
147	bool fUseIoApic;
148	/** I/O APIC irq levels */
149	volatile uint32_t pci_apic_irq_levels[PCI_APIC_IRQ_PINS];
150	/** ACPI IRQ level */
151	uint32_t acpi_irq_level;
152	/** ACPI PIC IRQ */
153	int acpi_irq;
154	/** Config register. */
155	uint32_t uConfigReg;
156
157	/** R3 pointer to the device instance. */
158	PPDMDEVINSR3 pDevInsR3;
159	/** R0 pointer to the device instance. */
160	PPDMDEVINSR0 pDevInsR0;
161	/** RC pointer to the device instance. */
162	PPDMDEVINSRC pDevInsRC;
163
164	#if HC_ARCH_BITS == 64
165	uint32_t Alignment0;
166	#endif
167
168	/** ISA bridge state. */
169	PIIX3 PIIX3State;
170	/** PCI bus which is attached to the host-to-PCI bridge. */
171	PCIBUS PciBus;
172
173	} PCIGLOBALS;
174	/** Pointer to per VM data. */
175	typedef PCIGLOBALS *PPCIGLOBALS;
176
177
178	/*******************************************************************************
179	* Defined Constants And Macros *
180	*******************************************************************************/
181
182	/** Converts a bus instance pointer to a device instance pointer. */
183	#define PCIBUS_2_DEVINS(pPciBus) ((pPciBus)->CTX_SUFF(pDevIns))
184	/** Converts a device instance pointer to a PCIGLOBALS pointer. */
185	#define DEVINS_2_PCIGLOBALS(pDevIns) ((PPCIGLOBALS)(PDMINS_2_DATA(pDevIns, PPCIGLOBALS)))
186	/** Converts a device instance pointer to a PCIBUS pointer. */
187	#define DEVINS_2_PCIBUS(pDevIns) ((PPCIBUS)(&PDMINS_2_DATA(pDevIns, PPCIGLOBALS)->PciBus))
188
189	/** Converts a pointer to a PCI bus instance to a PCIGLOBALS pointer.
190	* @note This works only if the bus number is 0!!!
191	*/
192	#define PCIBUS_2_PCIGLOBALS(pPciBus) ( (PPCIGLOBALS)((uintptr_t)(pPciBus) - RT_OFFSETOF(PCIGLOBALS, PciBus)) )
193
194	/** @def PCI_LOCK
195	* Acquires the PDM lock. This is a NOP if locking is disabled. */
196	/** @def PCI_UNLOCK
197	* Releases the PDM lock. This is a NOP if locking is disabled. */
198	#define PCI_LOCK(pDevIns, rc) \
199	do { \
200	int rc2 = DEVINS_2_PCIBUS(pDevIns)->CTX_SUFF(pPciHlp)->pfnLock((pDevIns), rc); \
201	if (rc2 != VINF_SUCCESS) \
202	return rc2; \
203	} while (0)
204	#define PCI_UNLOCK(pDevIns) \
205	DEVINS_2_PCIBUS(pDevIns)->CTX_SUFF(pPciHlp)->pfnUnlock(pDevIns)
206
207	/** @def VBOX_PCI_SAVED_STATE_VERSION
208	* Saved state version of the PCI bus device.
209	*/
210	#define VBOX_PCI_SAVED_STATE_VERSION 3
211
212
213	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
214	/*******************************************************************************
215	* Internal Functions *
216	*******************************************************************************/
217	RT_C_DECLS_BEGIN
218
219	PDMBOTHCBDECL(void) pciSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel);
220	PDMBOTHCBDECL(void) pcibridgeSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel);
221	PDMBOTHCBDECL(int) pciIOPortAddressWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
222	PDMBOTHCBDECL(int) pciIOPortAddressRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb);
223	PDMBOTHCBDECL(int) pciIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
224	PDMBOTHCBDECL(int) pciIOPortDataRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb);
225
226	#ifdef IN_RING3
227	DECLINLINE(PPCIDEVICE) pciFindBridge(PPCIBUS pBus, uint8_t iBus);
228	#endif
229
230	RT_C_DECLS_END
231
232	#define DEBUG_PCI
233
234	#define PCI_VENDOR_ID 0x00 /* 16 bits */
235	#define PCI_DEVICE_ID 0x02 /* 16 bits */
236	#define PCI_COMMAND 0x04 /* 16 bits */
237	#define PCI_COMMAND_IO 0x01 /* Enable response in I/O space */
238	#define PCI_COMMAND_MEMORY 0x02 /* Enable response in Memory space */
239	#define PCI_CLASS_DEVICE 0x0a /* Device class */
240	#define PCI_INTERRUPT_LINE 0x3c /* 8 bits */
241	#define PCI_INTERRUPT_PIN 0x3d /* 8 bits */
242	#define PCI_MIN_GNT 0x3e /* 8 bits */
243	#define PCI_MAX_LAT 0x3f /* 8 bits */
244
245
246	#ifdef IN_RING3
247
248	static void pci_update_mappings(PCIDevice *d)
249	{
250	PPCIBUS pBus = d->Int.s.CTX_SUFF(pBus);
251	PCIIORegion *r;
252	int cmd, i;
253	uint32_t last_addr, new_addr, config_ofs;
254
255	cmd = RT_LE2H_U16((uint16_t )(d->config + PCI_COMMAND));
256	for(i = 0; i < PCI_NUM_REGIONS; i++) {
257	r = &d->Int.s.aIORegions[i];
258	if (i == PCI_ROM_SLOT) {
259	config_ofs = 0x30;
260	} else {
261	config_ofs = 0x10 + i * 4;
262	}
263	if (r->size != 0) {
264	if (r->type & PCI_ADDRESS_SPACE_IO) {
265	if (cmd & PCI_COMMAND_IO) {
266	new_addr = RT_LE2H_U32((uint32_t )(d->config +
267	config_ofs));
268	new_addr = new_addr & ~(r->size - 1);
269	last_addr = new_addr + r->size - 1;
270	/* NOTE: we have only 64K ioports on PC */
271	if (last_addr <= new_addr \|\| new_addr == 0 \|\|
272	last_addr >= 0x10000) {
273	new_addr = ~0U;
274	}
275	} else {
276	new_addr = ~0U;
277	}
278	} else {
279	if (cmd & PCI_COMMAND_MEMORY) {
280	new_addr = RT_LE2H_U32((uint32_t )(d->config +
281	config_ofs));
282	/* the ROM slot has a specific enable bit */
283	if (i == PCI_ROM_SLOT && !(new_addr & 1))
284	goto no_mem_map;
285	new_addr = new_addr & ~(r->size - 1);
286	last_addr = new_addr + r->size - 1;
287	/* NOTE: we do not support wrapping */
288	/* XXX: as we cannot support really dynamic
289	mappings, we handle specific values as invalid
290	mappings. */
291	if (last_addr <= new_addr \|\| new_addr == 0 \|\|
292	last_addr == ~0U) {
293	new_addr = ~0U;
294	}
295	} else {
296	no_mem_map:
297	new_addr = ~0U;
298	}
299	}
300	/* now do the real mapping */
301	if (new_addr != r->addr) {
302	if (r->addr != ~0U) {
303	if (r->type & PCI_ADDRESS_SPACE_IO) {
304	int devclass;
305	/* NOTE: specific hack for IDE in PC case:
306	only one byte must be mapped. */
307	devclass = d->config[0x0a] \| (d->config[0x0b] << 8);
308	if (devclass == 0x0101 && r->size == 4) {
309	int rc = d->pDevIns->pDevHlpR3->pfnIOPortDeregister(d->pDevIns, r->addr + 2, 1);
310	AssertRC(rc);
311	} else {
312	int rc = d->pDevIns->pDevHlpR3->pfnIOPortDeregister(d->pDevIns, r->addr, r->size);
313	AssertRC(rc);
314	}
315	} else {
316	RTGCPHYS GCPhysBase = r->addr;
317	int rc;
318	if (pBus->pPciHlpR3->pfnIsMMIO2Base(pBus->pDevInsR3, d->pDevIns, GCPhysBase))
319	{
320	/* unmap it. */
321	rc = r->map_func(d, i, NIL_RTGCPHYS, r->size, (PCIADDRESSSPACE)(r->type));
322	AssertRC(rc);
323	rc = PDMDevHlpMMIO2Unmap(d->pDevIns, i, GCPhysBase);
324	}
325	else
326	rc = d->pDevIns->pDevHlpR3->pfnMMIODeregister(d->pDevIns, GCPhysBase, r->size);
327	AssertMsgRC(rc, ("rc=%Rrc d=%s i=%d GCPhysBase=%RGp size=%#x\n", rc, d->name, i, GCPhysBase, r->size));
328	}
329	}
330	r->addr = new_addr;
331	if (r->addr != ~0U) {
332	int rc = r->map_func(d, i,
333	r->addr + (r->type & PCI_ADDRESS_SPACE_IO ? 0 : 0),
334	r->size, (PCIADDRESSSPACE)(r->type));
335	AssertRC(rc);
336	}
337	}
338	}
339	}
340	}
341
342
343	static DECLCALLBACK(uint32_t) pci_default_read_config(PCIDevice *d, uint32_t address, unsigned len)
344	{
345	uint32_t val;
346	switch(len) {
347	case 1:
348	val = d->config[address];
349	break;
350	case 2:
351	val = RT_LE2H_U16((uint16_t )(d->config + address));
352	break;
353	default:
354	case 4:
355	val = RT_LE2H_U32((uint32_t )(d->config + address));
356	break;
357	}
358	return val;
359	}
360
361	static DECLCALLBACK(void) pci_default_write_config(PCIDevice *d, uint32_t address, uint32_t val, unsigned len)
362	{
363	int can_write;
364	unsigned i;
365	uint32_t end, addr;
366
367	if (len == 4 && ((address >= 0x10 && address < 0x10 + 4 * 6) \|\|
368	(address >= 0x30 && address < 0x34))) {
369	PCIIORegion *r;
370	int reg;
371
372	if ( address >= 0x30 ) {
373	reg = PCI_ROM_SLOT;
374	}else{
375	reg = (address - 0x10) >> 2;
376	}
377	r = &d->Int.s.aIORegions[reg];
378	if (r->size == 0)
379	goto default_config;
380	/* compute the stored value */
381	if (reg == PCI_ROM_SLOT) {
382	/* keep ROM enable bit */
383	val &= (~(r->size - 1)) \| 1;
384	} else {
385	val &= ~(r->size - 1);
386	val \|= r->type;
387	}
388	(uint32_t )(d->config + address) = RT_H2LE_U32(val);
389	pci_update_mappings(d);
390	return;
391	}
392	default_config:
393	/* not efficient, but simple */
394	addr = address;
395	for(i = 0; i < len; i++) {
396	/* default read/write accesses */
397	switch(d->config[0x0e]) {
398	case 0x00: /* normal device */
399	case 0x80: /* multi-function device */
400	switch(addr) {
401	case 0x00:
402	case 0x01:
403	case 0x02:
404	case 0x03:
405	case 0x08:
406	case 0x09:
407	case 0x0a:
408	case 0x0b:
409	case 0x0e:
410	case 0x10: case 0x11: case 0x12: case 0x13: case 0x14: case 0x15: case 0x16: case 0x17: /* base */
411	case 0x18: case 0x19: case 0x1a: case 0x1b: case 0x1c: case 0x1d: case 0x1e: case 0x1f:
412	case 0x20: case 0x21: case 0x22: case 0x23: case 0x24: case 0x25: case 0x26: case 0x27:
413	case 0x2c: case 0x2d: /* subsystem ID */
414	case 0x2e: case 0x2f: /* vendor ID */
415	case 0x30: case 0x31: case 0x32: case 0x33: /* rom */
416	case 0x3d:
417	can_write = 0;
418	break;
419	default:
420	can_write = 1;
421	break;
422	}
423	break;
424	default:
425	case 0x01: /* bridge */
426	switch(addr) {
427	case 0x00:
428	case 0x01:
429	case 0x02:
430	case 0x03:
431	case 0x08:
432	case 0x09:
433	case 0x0a:
434	case 0x0b:
435	case 0x0e:
436	case 0x38: case 0x39: case 0x3a: case 0x3b: /* rom */
437	case 0x3d:
438	can_write = 0;
439	break;
440	default:
441	can_write = 1;
442	break;
443	}
444	break;
445	}
446	#ifdef VBOX
447	if (addr == 0x06)
448	{
449	/* don't change read-only bits => actually all lower bits are read-only */
450	val &= UINT32_C(~0xff);
451	/* status register, low part: clear bits by writing a '1' to the corresponding bit */
452	d->config[addr] &= ~val;
453	}
454	else if (addr == 0x07)
455	{
456	/* don't change read-only bits */
457	val &= UINT32_C(~0x06);
458	/* status register, high part: clear bits by writing a '1' to the corresponding bit */
459	d->config[addr] &= ~val;
460	}
461	else
462	#endif
463	if (can_write) {
464	d->config[addr] = val;
465	}
466	addr++;
467	val >>= 8;
468	}
469
470	end = address + len;
471	if (end > PCI_COMMAND && address < (PCI_COMMAND + 2)) {
472	/* if the command register is modified, we must modify the mappings */
473	pci_update_mappings(d);
474	}
475	}
476
477	#endif /* IN_RING3 */
478
479	static int pci_data_write(PPCIGLOBALS pGlobals, uint32_t addr, uint32_t val, int len)
480	{
481	uint8_t iBus, iDevice;
482	uint32_t config_addr;
483
484	Log(("pci_data_write: addr=%08x val=%08x len=%d\n", pGlobals->uConfigReg, val, len));
485
486	if (!(pGlobals->uConfigReg & (1 << 31))) {
487	return VINF_SUCCESS;
488	}
489	if ((pGlobals->uConfigReg & 0x3) != 0) {
490	return VINF_SUCCESS;
491	}
492	iBus = (pGlobals->uConfigReg >> 16) & 0xff;
493	iDevice = (pGlobals->uConfigReg >> 8) & 0xff;
494	config_addr = (pGlobals->uConfigReg & 0xfc) \| (addr & 3);
495	if (iBus != 0)
496	{
497	if (pGlobals->PciBus.cBridges)
498	{
499	#ifdef IN_RING3 /** @todo do lookup in R0/RC too! */
500	PPCIDEVICE pBridgeDevice = pciFindBridge(&pGlobals->PciBus, iBus);
501	if (pBridgeDevice)
502	{
503	AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigWrite);
504	pBridgeDevice->Int.s.pfnBridgeConfigWrite(pBridgeDevice->pDevIns, iBus, iDevice, config_addr, val, len);
505	}
506	#else
507	return VINF_IOM_HC_IOPORT_WRITE;
508	#endif
509	}
510	}
511	else
512	{
513	R3PTRTYPE(PCIDevice *) pci_dev = pGlobals->PciBus.devices[iDevice];
514	if (pci_dev)
515	{
516	#ifdef IN_RING3
517	Log(("pci_config_write: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, val, len));
518	pci_dev->Int.s.pfnConfigWrite(pci_dev, config_addr, val, len);
519	#else
520	return VINF_IOM_HC_IOPORT_WRITE;
521	#endif
522	}
523	}
524	return VINF_SUCCESS;
525	}
526
527	static int pci_data_read(PPCIGLOBALS pGlobals, uint32_t addr, int len, uint32_t *pu32)
528	{
529	uint8_t iBus, iDevice;
530	uint32_t config_addr;
531
532	*pu32 = 0xffffffff;
533
534	if (!(pGlobals->uConfigReg & (1 << 31)))
535	return VINF_SUCCESS;
536	if ((pGlobals->uConfigReg & 0x3) != 0)
537	return VINF_SUCCESS;
538	iBus = (pGlobals->uConfigReg >> 16) & 0xff;
539	iDevice = (pGlobals->uConfigReg >> 8) & 0xff;
540	config_addr = (pGlobals->uConfigReg & 0xfc) \| (addr & 3);
541	if (iBus != 0)
542	{
543	if (pGlobals->PciBus.cBridges)
544	{
545	#ifdef IN_RING3 /** @todo do lookup in R0/RC too! */
546	PPCIDEVICE pBridgeDevice = pciFindBridge(&pGlobals->PciBus, iBus);
547	if (pBridgeDevice)
548	{
549	AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigRead);
550	*pu32 = pBridgeDevice->Int.s.pfnBridgeConfigRead(pBridgeDevice->pDevIns, iBus, iDevice, config_addr, len);
551	}
552	#else
553	return VINF_IOM_HC_IOPORT_READ;
554	#endif
555	}
556	}
557	else
558	{
559	R3PTRTYPE(PCIDevice *) pci_dev = pGlobals->PciBus.devices[iDevice];
560	if (pci_dev)
561	{
562	#ifdef IN_RING3
563	*pu32 = pci_dev->Int.s.pfnConfigRead(pci_dev, config_addr, len);
564	Log(("pci_config_read: %s: addr=%02x val=%08x len=%d\n", pci_dev->name, config_addr, *pu32, len));
565	#else
566	return VINF_IOM_HC_IOPORT_READ;
567	#endif
568	}
569	}
570
571	return VINF_SUCCESS;
572	}
573
574
575
576	/* return the global irq number corresponding to a given device irq
577	pin. We could also use the bus number to have a more precise
578	mapping.
579	This is the implementation note described in the PCI spec chapter 2.2.6 */
580	static inline int pci_slot_get_pirq(uint8_t uDevFn, int irq_num)
581	{
582	int slot_addend;
583	slot_addend = (uDevFn >> 3) - 1;
584	return (irq_num + slot_addend) & 3;
585	}
586
587	static inline int pci_slot_get_apic_pirq(uint8_t uDevFn, int irq_num)
588	{
589	return (irq_num + (uDevFn >> 3)) & 7;
590	}
591
592	static inline int get_pci_irq_apic_level(PPCIGLOBALS pGlobals, int irq_num)
593	{
594	return (pGlobals->pci_apic_irq_levels[irq_num] != 0);
595	}
596
597	static void apic_set_irq(PPCIBUS pBus, uint8_t uDevFn, PCIDevice *pPciDev, int irq_num1, int iLevel, int acpi_irq)
598	{
599	/* This is only allowed to be called with a pointer to the host bus. */
600	AssertMsg(pBus->iBus == 0, ("iBus=%u\n", pBus->iBus));
601
602	if (acpi_irq == -1) {
603	int apic_irq, apic_level;
604	PPCIGLOBALS pGlobals = PCIBUS_2_PCIGLOBALS(pBus);
605	int irq_num = pci_slot_get_apic_pirq(uDevFn, irq_num1);
606
607	if ((iLevel & PDM_IRQ_LEVEL_HIGH) == PDM_IRQ_LEVEL_HIGH)
608	ASMAtomicIncU32(&pGlobals->pci_apic_irq_levels[irq_num]);
609	else if ((iLevel & PDM_IRQ_LEVEL_HIGH) == PDM_IRQ_LEVEL_LOW)
610	ASMAtomicDecU32(&pGlobals->pci_apic_irq_levels[irq_num]);
611
612	apic_irq = irq_num + 0x10;
613	apic_level = get_pci_irq_apic_level(pGlobals, irq_num);
614	Log3(("apic_set_irq: %s: irq_num1=%d level=%d apic_irq=%d apic_level=%d irq_num1=%d\n",
615	R3STRING(pPciDev->name), irq_num1, iLevel, apic_irq, apic_level, irq_num));
616	pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), apic_irq, apic_level);
617
618	if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP) {
619	ASMAtomicDecU32(&pGlobals->pci_apic_irq_levels[irq_num]);
620	pPciDev->Int.s.uIrqPinState = PDM_IRQ_LEVEL_LOW;
621	apic_level = get_pci_irq_apic_level(pGlobals, irq_num);
622	Log3(("apic_set_irq: %s: irq_num1=%d level=%d apic_irq=%d apic_level=%d irq_num1=%d (flop)\n",
623	R3STRING(pPciDev->name), irq_num1, iLevel, apic_irq, apic_level, irq_num));
624	pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), apic_irq, apic_level);
625	}
626	} else {
627	Log3(("apic_set_irq: %s: irq_num1=%d level=%d acpi_irq=%d\n",
628	R3STRING(pPciDev->name), irq_num1, iLevel, acpi_irq));
629	pBus->CTX_SUFF(pPciHlp)->pfnIoApicSetIrq(pBus->CTX_SUFF(pDevIns), acpi_irq, iLevel);
630	}
631	}
632
633	DECLINLINE(int) get_pci_irq_level(PPCIGLOBALS pGlobals, int irq_num)
634	{
635	return (pGlobals->pci_irq_levels[irq_num] != 0);
636	}
637
638	/**
639	* Set the IRQ for a PCI device on the host bus - shared by host bus and bridge.
640	*
641	* @param pDevIns Device instance of the host PCI Bus.
642	* @param uDevFn The device number on the host bus which will raise the IRQ
643	* @param pPciDev The PCI device structure which raised the interrupt.
644	* @param iIrq IRQ number to set.
645	* @param iLevel IRQ level.
646	* @remark uDevFn and pPciDev->devfn are not the same if the device is behind a bridge.
647	* In that case uDevFn will be the slot of the bridge which is needed to calculate the
648	* PIRQ value.
649	*/
650	static void pciSetIrqInternal(PPCIGLOBALS pGlobals, uint8_t uDevFn, PPCIDEVICE pPciDev, int iIrq, int iLevel)
651	{
652	PPCIBUS pBus = &pGlobals->PciBus;
653	uint8_t *pbCfg = pGlobals->PIIX3State.dev.config;
654	const bool fIsAcpiDevice = pPciDev->config[2] == 0x13 && pPciDev->config[3] == 0x71;
655	const bool fIsApicEnabled = pGlobals->fUseIoApic && pbCfg[0xde] == 0xbe && pbCfg[0xad] == 0xef;
656	int pic_irq, pic_level;
657
658	/* Check if the state changed. */
659	if (pPciDev->Int.s.uIrqPinState != iLevel)
660	{
661	pPciDev->Int.s.uIrqPinState = (iLevel & PDM_IRQ_LEVEL_HIGH);
662
663	/* apic only */
664	if (fIsApicEnabled)
665	{
666	if (fIsAcpiDevice)
667	/*
668	* ACPI needs special treatment since SCI is hardwired and
669	* should not be affected by PCI IRQ routing tables at the
670	* same time SCI IRQ is shared in PCI sense hence this
671	* kludge (i.e. we fetch the hardwired value from ACPIs
672	* PCI device configuration space).
673	*/
674	apic_set_irq(pBus, uDevFn, pPciDev, -1, iLevel, pPciDev->config[PCI_INTERRUPT_LINE]);
675	else
676	apic_set_irq(pBus, uDevFn, pPciDev, iIrq, iLevel, -1);
677	return;
678	}
679
680	if (fIsAcpiDevice)
681	{
682	/* As per above treat ACPI in a special way */
683	pic_irq = pPciDev->config[PCI_INTERRUPT_LINE];
684	pGlobals->acpi_irq = pic_irq;
685	pGlobals->acpi_irq_level = iLevel & PDM_IRQ_LEVEL_HIGH;
686	}
687	else
688	{
689	int irq_num;
690	irq_num = pci_slot_get_pirq(uDevFn, iIrq);
691
692	if (pPciDev->Int.s.uIrqPinState == PDM_IRQ_LEVEL_HIGH)
693	ASMAtomicIncU32(&pGlobals->pci_irq_levels[irq_num]);
694	else if (pPciDev->Int.s.uIrqPinState == PDM_IRQ_LEVEL_LOW)
695	ASMAtomicDecU32(&pGlobals->pci_irq_levels[irq_num]);
696
697	/* now we change the pic irq level according to the piix irq mappings */
698	pic_irq = pbCfg[0x60 + irq_num];
699	if (pic_irq >= 16)
700	{
701	if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP)
702	{
703	ASMAtomicDecU32(&pGlobals->pci_irq_levels[irq_num]);
704	pPciDev->Int.s.uIrqPinState = PDM_IRQ_LEVEL_LOW;
705	}
706
707	return;
708	}
709	}
710
711	/* the pic level is the logical OR of all the PCI irqs mapped to it */
712	pic_level = 0;
713	if (pic_irq == pbCfg[0x60])
714	pic_level \|= get_pci_irq_level(pGlobals, 0);
715	if (pic_irq == pbCfg[0x61])
716	pic_level \|= get_pci_irq_level(pGlobals, 1);
717	if (pic_irq == pbCfg[0x62])
718	pic_level \|= get_pci_irq_level(pGlobals, 2);
719	if (pic_irq == pbCfg[0x63])
720	pic_level \|= get_pci_irq_level(pGlobals, 3);
721	if (pic_irq == pGlobals->acpi_irq)
722	pic_level \|= pGlobals->acpi_irq_level;
723
724	Log3(("pciSetIrq: %s: iLevel=%d iIrq=%d pic_irq=%d pic_level=%d\n",
725	R3STRING(pPciDev->name), iLevel, iIrq, pic_irq, pic_level));
726	pBus->CTX_SUFF(pPciHlp)->pfnIsaSetIrq(pBus->CTX_SUFF(pDevIns), pic_irq, pic_level);
727
728	/** @todo optimize pci irq flip-flop some rainy day. */
729	if ((iLevel & PDM_IRQ_LEVEL_FLIP_FLOP) == PDM_IRQ_LEVEL_FLIP_FLOP)
730	pciSetIrqInternal(pGlobals, uDevFn, pPciDev, iIrq, PDM_IRQ_LEVEL_LOW);
731	}
732	}
733
734	/**
735	* Set the IRQ for a PCI device on the host bus.
736	*
737	* @param pDevIns Device instance of the PCI Bus.
738	* @param pPciDev The PCI device structure.
739	* @param iIrq IRQ number to set.
740	* @param iLevel IRQ level.
741	*/
742	PDMBOTHCBDECL(void) pciSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel)
743	{
744	pciSetIrqInternal(PDMINS_2_DATA(pDevIns, PPCIGLOBALS), pPciDev->devfn, pPciDev, iIrq, iLevel);
745	}
746
747	#ifdef IN_RING3
748
749	/**
750	* Finds a bridge on the bus which contains the destination bus.
751	*
752	* @return Pointer to the device instance data of the bus or
753	* NULL if no bridge was found.
754	* @param pBus Pointer to the bus to search on.
755	* @param iBus Destination bus number.
756	*/
757	DECLINLINE(PPCIDEVICE) pciFindBridge(PPCIBUS pBus, uint8_t iBus)
758	{
759	/* Search for a fitting bridge. */
760	for (uint32_t iBridge = 0; iBridge < pBus->cBridges; iBridge++)
761	{
762	/*
763	* Examine secondary and subordinate bus number.
764	* If the target bus is in the range we pass the request on to the bridge.
765	*/
766	PPCIDEVICE pBridgeTemp = pBus->papBridgesR3[iBridge];
767	AssertMsg(pBridgeTemp && pBridgeTemp->Int.s.fPciToPciBridge,
768	("Device is not a PCI bridge but on the list of PCI bridges\n"));
769
770	if ( iBus >= pBridgeTemp->config[VBOX_PCI_SECONDARY_BUS]
771	&& iBus <= pBridgeTemp->config[VBOX_PCI_SUBORDINATE_BUS])
772	return pBridgeTemp;
773	}
774
775	/* Nothing found. */
776	return NULL;
777	}
778
779	static void piix3_reset(PIIX3State *d)
780	{
781	uint8_t *pci_conf = d->dev.config;
782
783	pci_conf[0x04] = 0x07; /* master, memory and I/O */
784	pci_conf[0x05] = 0x00;
785	pci_conf[0x06] = 0x00;
786	pci_conf[0x07] = 0x02; /* PCI_status_devsel_medium */
787	pci_conf[0x4c] = 0x4d;
788	pci_conf[0x4e] = 0x03;
789	pci_conf[0x4f] = 0x00;
790	pci_conf[0x60] = 0x80;
791	pci_conf[0x69] = 0x02;
792	pci_conf[0x70] = 0x80;
793	pci_conf[0x76] = 0x0c;
794	pci_conf[0x77] = 0x0c;
795	pci_conf[0x78] = 0x02;
796	pci_conf[0x79] = 0x00;
797	pci_conf[0x80] = 0x00;
798	pci_conf[0x82] = 0x02; /* Get rid of the Linux guest "Enabling Passive Release" PCI quirk warning. */
799	pci_conf[0xa0] = 0x08;
800	pci_conf[0xa0] = 0x08;
801	pci_conf[0xa2] = 0x00;
802	pci_conf[0xa3] = 0x00;
803	pci_conf[0xa4] = 0x00;
804	pci_conf[0xa5] = 0x00;
805	pci_conf[0xa6] = 0x00;
806	pci_conf[0xa7] = 0x00;
807	pci_conf[0xa8] = 0x0f;
808	pci_conf[0xaa] = 0x00;
809	pci_conf[0xab] = 0x00;
810	pci_conf[0xac] = 0x00;
811	pci_conf[0xae] = 0x00;
812	}
813
814	static void pci_config_writel(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val)
815	{
816	pGlobals->uConfigReg = 0x80000000 \| (uBus << 16) \|
817	(uDevFn << 8) \| addr;
818	pci_data_write(pGlobals, 0, val, 4);
819	}
820
821	static void pci_config_writew(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val)
822	{
823	pGlobals->uConfigReg = 0x80000000 \| (uBus << 16) \|
824	(uDevFn << 8) \| (addr & ~3);
825	pci_data_write(pGlobals, addr & 3, val, 2);
826	}
827
828	static void pci_config_writeb(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr, uint32_t val)
829	{
830	pGlobals->uConfigReg = 0x80000000 \| (uBus << 16) \|
831	(uDevFn << 8) \| (addr & ~3);
832	pci_data_write(pGlobals, addr & 3, val, 1);
833	}
834
835	static uint32_t pci_config_readl(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr)
836	{
837	pGlobals->uConfigReg = 0x80000000 \| (uBus << 16) \|
838	(uDevFn << 8) \| addr;
839	uint32_t u32Val;
840	int rc = pci_data_read(pGlobals, 0, 4, &u32Val);
841	AssertRC(rc);
842	return u32Val;
843	}
844
845	static uint32_t pci_config_readw(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr)
846	{
847	pGlobals->uConfigReg = 0x80000000 \| (uBus << 16) \|
848	(uDevFn << 8) \| (addr & ~3);
849	uint32_t u32Val;
850	int rc = pci_data_read(pGlobals, addr & 3, 2, &u32Val);
851	AssertRC(rc);
852	return u32Val;
853	}
854
855	static uint32_t pci_config_readb(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint32_t addr)
856	{
857	pGlobals->uConfigReg = 0x80000000 \| (uBus << 16) \|
858	(uDevFn << 8) \| (addr & ~3);
859	uint32_t u32Val;
860	int rc = pci_data_read(pGlobals, addr & 3, 1, &u32Val);
861	AssertRC(rc);
862	return u32Val;
863	}
864
865	/* host irqs corresponding to PCI irqs A-D */
866	static const uint8_t pci_irqs[4] = { 11, 9, 11, 9 }; /* bird: added const */
867
868	static void pci_set_io_region_addr(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, int region_num, uint32_t addr)
869	{
870	uint16_t cmd;
871	uint32_t ofs;
872
873	if ( region_num == PCI_ROM_SLOT )
874	ofs = 0x30;
875	else
876	ofs = 0x10 + region_num * 4;
877
878	/* Read memory type first. */
879	uint8_t uRessourceType = pci_config_readb(pGlobals, uBus, uDevFn, ofs);
880
881	/* Read command register. */
882	cmd = pci_config_readw(pGlobals, uBus, uDevFn, PCI_COMMAND);
883	if ( region_num == PCI_ROM_SLOT )
884	cmd \|= 2;
885	else if ((uRessourceType & 0x01) == 1) /* Test if region is I/O space. */
886	cmd \|= 1; /* Enable I/O space access. */
887	else /* The region is MMIO. */
888	cmd \|= 2; /* Enable MMIO access. */
889
890	/* Write address of the device. */
891	pci_config_writel(pGlobals, uBus, uDevFn, ofs, addr);
892
893	/* enable memory mappings */
894	pci_config_writew(pGlobals, uBus, uDevFn, PCI_COMMAND, cmd);
895	}
896
897	static void pci_bios_init_device(PPCIGLOBALS pGlobals, uint8_t uBus, uint8_t uDevFn, uint8_t cBridgeDepth, uint8_t *paBridgePositions)
898	{
899	uint32_t *paddr;
900	int i, pin, pic_irq;
901	uint16_t devclass, vendor_id, device_id;
902
903	devclass = pci_config_readw(pGlobals, uBus, uDevFn, PCI_CLASS_DEVICE);
904	vendor_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_VENDOR_ID);
905	device_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_DEVICE_ID);
906
907	/* Check if device is present. */
908	if (vendor_id != 0xffff)
909	{
910	switch(devclass)
911	{
912	case 0x0101:
913	if ( (vendor_id == 0x8086)
914	&& (device_id == 0x7010 \|\| device_id == 0x7111 \|\| device_id == 0x269e))
915	{
916	/* PIIX3, PIIX4 or ICH6 IDE */
917	pci_config_writew(pGlobals, uBus, uDevFn, 0x40, 0x8000); /* enable IDE0 */
918	pci_config_writew(pGlobals, uBus, uDevFn, 0x42, 0x8000); /* enable IDE1 */
919	goto default_map;
920	}
921	else
922	{
923	/* IDE: we map it as in ISA mode */
924	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0x1f0);
925	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 1, 0x3f4);
926	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 2, 0x170);
927	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 3, 0x374);
928	}
929	break;
930	case 0x0300:
931	if (vendor_id != 0x80ee)
932	goto default_map;
933	/* VGA: map frame buffer to default Bochs VBE address */
934	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0xE0000000);
935	/*
936	* Legacy VGA I/O ports are implicitly decoded by a VGA class device. But
937	* only the framebuffer (i.e., a memory region) is explicitly registered via
938	* pci_set_io_region_addr, so I/O decoding must be enabled manually.
939	*/
940	pci_config_writeb(pGlobals, uBus, uDevFn, PCI_COMMAND,
941	pci_config_readb(pGlobals, uBus, uDevFn, PCI_COMMAND)
942	\| 1 /* Enable I/O space access. */);
943	break;
944	case 0x0800:
945	/* PIC */
946	vendor_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_VENDOR_ID);
947	device_id = pci_config_readw(pGlobals, uBus, uDevFn, PCI_DEVICE_ID);
948	if (vendor_id == 0x1014)
949	{
950	/* IBM */
951	if (device_id == 0x0046 \|\| device_id == 0xFFFF)
952	{
953	/* MPIC & MPIC2 */
954	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0x80800000 + 0x00040000);
955	}
956	}
957	break;
958	case 0xff00:
959	if ( (vendor_id == 0x0106b)
960	&& (device_id == 0x0017 \|\| device_id == 0x0022))
961	{
962	/* macio bridge */
963	pci_set_io_region_addr(pGlobals, uBus, uDevFn, 0, 0x80800000);
964	}
965	break;
966	case 0x0604:
967	{
968	/* Init PCI-to-PCI bridge. */
969	pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_PRIMARY_BUS, uBus);
970
971	AssertMsg(pGlobals->uBus < 255, ("Too many bridges on the bus\n"));
972	pGlobals->uBus++;
973	pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_SECONDARY_BUS, pGlobals->uBus);
974	pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_SUBORDINATE_BUS, 0xff); /* Temporary until we know how many other bridges are behind this one. */
975
976	/* Add position of this bridge into the array. */
977	paBridgePositions[cBridgeDepth+1] = (uDevFn >> 3);
978
979	/*
980	* The I/O range for the bridge must be aligned to a 4KB boundary.
981	* This does not change anything really as the access to the device is not going
982	* through the bridge but we want to be compliant to the spec.
983	*/
984	if ((pGlobals->pci_bios_io_addr % 4096) != 0)
985	pGlobals->pci_bios_io_addr = RT_ALIGN_32(pGlobals->pci_bios_io_addr, 4*1024);
986	Log(("%s: Aligned I/O start address. New address %#x\n", __FUNCTION__, pGlobals->pci_bios_io_addr));
987	pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_IO_BASE, (pGlobals->pci_bios_io_addr >> 8) & 0xf0);
988
989	/* The MMIO range for the bridge must be aligned to a 1MB boundary. */
990	if ((pGlobals->pci_bios_mem_addr % (1024 * 1024)) != 0)
991	pGlobals->pci_bios_mem_addr = RT_ALIGN_32(pGlobals->pci_bios_mem_addr, 1024*1024);
992	Log(("%s: Aligned MMIO start address. New address %#x\n", __FUNCTION__, pGlobals->pci_bios_mem_addr));
993	pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_MEMORY_BASE, (pGlobals->pci_bios_mem_addr >> 16) & UINT32_C(0xffff0));
994
995	/* Save values to compare later to. */
996	uint32_t u32IoAddressBase = pGlobals->pci_bios_io_addr;
997	uint32_t u32MMIOAddressBase = pGlobals->pci_bios_mem_addr;
998
999	/* Init devices behind the bridge and possibly other bridges as well. */
1000	for (int i = 0; i <= 255; i++)
1001	pci_bios_init_device(pGlobals, uBus + 1, i, cBridgeDepth + 1, paBridgePositions);
1002
1003	/* The number of bridges behind the this one is now available. */
1004	pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_SUBORDINATE_BUS, pGlobals->uBus);
1005
1006	/*
1007	* Set I/O limit register. If there is no device with I/O space behind the bridge
1008	* we set a lower value than in the base register.
1009	* The result with a real bridge is that no I/O transactions are passed to the secondary
1010	* interface. Again this doesn't really matter here but we want to be compliant to the spec.
1011	*/
1012	if ((u32IoAddressBase != pGlobals->pci_bios_io_addr) && ((pGlobals->pci_bios_io_addr % 4096) != 0))
1013	{
1014	/* The upper boundary must be one byte less than a 4KB boundary. */
1015	pGlobals->pci_bios_io_addr = RT_ALIGN_32(pGlobals->pci_bios_io_addr, 4*1024);
1016	}
1017	pci_config_writeb(pGlobals, uBus, uDevFn, VBOX_PCI_IO_LIMIT, ((pGlobals->pci_bios_io_addr >> 8) & 0xf0) - 1);
1018
1019	/* Same with the MMIO limit register but with 1MB boundary here. */
1020	if ((u32MMIOAddressBase != pGlobals->pci_bios_mem_addr) && ((pGlobals->pci_bios_mem_addr % (1024 * 1024)) != 0))
1021	{
1022	/* The upper boundary must be one byte less than a 1MB boundary. */
1023	pGlobals->pci_bios_mem_addr = RT_ALIGN_32(pGlobals->pci_bios_mem_addr, 1024*1024);
1024	}
1025	pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_MEMORY_LIMIT, ((pGlobals->pci_bios_mem_addr >> 16) & UINT32_C(0xfff0)) - 1);
1026
1027	/*
1028	* Set the prefetch base and limit registers. We currently have no device with a prefetchable region
1029	* which may be behind a bridge. Thatswhy it is unconditionally disabled here atm by writing a higher value into
1030	* the base register than in the limit register.
1031	*/
1032	pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_MEMORY_BASE, 0xfff0);
1033	pci_config_writew(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_MEMORY_LIMIT, 0x0);
1034	pci_config_writel(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_BASE_UPPER32, 0x00);
1035	pci_config_writel(pGlobals, uBus, uDevFn, VBOX_PCI_PREF_LIMIT_UPPER32, 0x00);
1036	break;
1037	}
1038	default:
1039	default_map:
1040	{
1041	/* default memory mappings */
1042	/*
1043	* PCI_NUM_REGIONS is 7 because of the rom region but there are only 6 base address register defined by the PCI spec.
1044	* Leaving only PCI_NUM_REGIONS would cause reading another and enabling a memory region which does not exist.
1045	*/
1046	for(i = 0; i < (PCI_NUM_REGIONS-1); i++)
1047	{
1048	uint32_t u32Size;
1049	uint8_t u8RessourceType;
1050	uint32_t u32Address = 0x10 + i * 4;
1051
1052	/* Calculate size. */
1053	u8RessourceType = pci_config_readb(pGlobals, uBus, uDevFn, u32Address);
1054	pci_config_writel(pGlobals, uBus, uDevFn, u32Address, UINT32_C(0xffffffff));
1055	u32Size = pci_config_readl(pGlobals, uBus, uDevFn, u32Address);
1056	/* Clear ressource information depending on ressource type. */
1057	if ((u8RessourceType & 0x01) == 1) /* I/O */
1058	u32Size &= ~(0x01);
1059	else /* MMIO */
1060	u32Size &= ~(0x0f);
1061
1062	/*
1063	* Invert all bits and add 1 to get size of the region.
1064	* (From PCI implementation note)
1065	*/
1066	if (((u8RessourceType & 0x01) == 1) && (u32Size & UINT32_C(0xffff0000)) == 0)
1067	u32Size = (~(u32Size \| UINT32_C(0xffff0000))) + 1;
1068	else
1069	u32Size = (~u32Size) + 1;
1070
1071	Log(("%s: Size of region %u for device %d on bus %d is %u\n", __FUNCTION__, i, uDevFn, uBus, u32Size));
1072
1073	if (u32Size)
1074	{
1075	if ((u8RessourceType & 0x01) == 1)
1076	paddr = &pGlobals->pci_bios_io_addr;
1077	else
1078	paddr = &pGlobals->pci_bios_mem_addr;
1079	paddr = (paddr + u32Size - 1) & ~(u32Size - 1);
1080	Log(("%s: Start address of %s region %u is %#x\n", __FUNCTION__, ((u8RessourceType & 0x01) == 1 ? "I/O" : "MMIO"), i, *paddr));
1081	pci_set_io_region_addr(pGlobals, uBus, uDevFn, i, *paddr);
1082	*paddr += u32Size;
1083	Log(("%s: New address is %#x\n", __FUNCTION__, *paddr));
1084	}
1085	}
1086	break;
1087	}
1088	}
1089
1090	/* map the interrupt */
1091	pin = pci_config_readb(pGlobals, uBus, uDevFn, PCI_INTERRUPT_PIN);
1092	if (pin != 0)
1093	{
1094	uint8_t uBridgeDevFn = uDevFn;
1095	pin--;
1096
1097	/* We need to go up to the host bus to see which irq this device will assert there. */
1098	while (cBridgeDepth != 0)
1099	{
1100	/* Get the pin the device would assert on the bridge. */
1101	pin = ((uBridgeDevFn >> 3) + pin) & 3;
1102	uBridgeDevFn = paBridgePositions[cBridgeDepth];
1103	cBridgeDepth--;
1104	}
1105
1106	pin = pci_slot_get_pirq(uDevFn, pin);
1107	pic_irq = pci_irqs[pin];
1108	pci_config_writeb(pGlobals, uBus, uDevFn, PCI_INTERRUPT_LINE, pic_irq);
1109	}
1110	}
1111	}
1112
1113	#endif /* IN_RING3 */
1114
1115	/* -=-=-=-=-=- wrappers -=-=-=-=-=- */
1116
1117	/**
1118	* Port I/O Handler for PCI address OUT operations.
1119	*
1120	* @returns VBox status code.
1121	*
1122	* @param pDevIns The device instance.
1123	* @param pvUser User argument - ignored.
1124	* @param uPort Port number used for the IN operation.
1125	* @param u32 The value to output.
1126	* @param cb The value size in bytes.
1127	*/
1128	PDMBOTHCBDECL(int) pciIOPortAddressWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1129	{
1130	Log(("pciIOPortAddressWrite: Port=%#x u32=%#x cb=%d\n", Port, u32, cb));
1131	NOREF(pvUser);
1132	if (cb == 4)
1133	{
1134	PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
1135	PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_WRITE);
1136	pThis->uConfigReg = u32;
1137	PCI_UNLOCK(pDevIns);
1138	}
1139	/* else: 440FX does "pass through to the bus" for other writes, what ever that means.
1140	* Linux probes for cmd640 using byte writes/reads during ide init. We'll just ignore it. */
1141	return VINF_SUCCESS;
1142	}
1143
1144
1145	/**
1146	* Port I/O Handler for PCI address IN operations.
1147	*
1148	* @returns VBox status code.
1149	*
1150	* @param pDevIns The device instance.
1151	* @param pvUser User argument - ignored.
1152	* @param uPort Port number used for the IN operation.
1153	* @param pu32 Where to store the result.
1154	* @param cb Number of bytes read.
1155	*/
1156	PDMBOTHCBDECL(int) pciIOPortAddressRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
1157	{
1158	NOREF(pvUser);
1159	if (cb == 4)
1160	{
1161	PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
1162	PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_READ);
1163	*pu32 = pThis->uConfigReg;
1164	PCI_UNLOCK(pDevIns);
1165	Log(("pciIOPortAddressRead: Port=%#x cb=%d -> %#x\n", Port, cb, *pu32));
1166	return VINF_SUCCESS;
1167	}
1168	/* else: 440FX does "pass through to the bus" for other writes, what ever that means.
1169	* Linux probes for cmd640 using byte writes/reads during ide init. We'll just ignore it. */
1170	Log(("pciIOPortAddressRead: Port=%#x cb=%d VERR_IOM_IOPORT_UNUSED\n", Port, cb));
1171	return VERR_IOM_IOPORT_UNUSED;
1172	}
1173
1174
1175	/**
1176	* Port I/O Handler for PCI data OUT operations.
1177	*
1178	* @returns VBox status code.
1179	*
1180	* @param pDevIns The device instance.
1181	* @param pvUser User argument - ignored.
1182	* @param uPort Port number used for the IN operation.
1183	* @param u32 The value to output.
1184	* @param cb The value size in bytes.
1185	*/
1186	PDMBOTHCBDECL(int) pciIOPortDataWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
1187	{
1188	Log(("pciIOPortDataWrite: Port=%#x u32=%#x cb=%d\n", Port, u32, cb));
1189	NOREF(pvUser);
1190	int rc = VINF_SUCCESS;
1191	if (!(Port % cb))
1192	{
1193	PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_WRITE);
1194	rc = pci_data_write(PDMINS_2_DATA(pDevIns, PPCIGLOBALS), Port, u32, cb);
1195	PCI_UNLOCK(pDevIns);
1196	}
1197	else
1198	AssertMsgFailed(("Write to port %#x u32=%#x cb=%d\n", Port, u32, cb));
1199	return rc;
1200	}
1201
1202
1203	/**
1204	* Port I/O Handler for PCI data IN operations.
1205	*
1206	* @returns VBox status code.
1207	*
1208	* @param pDevIns The device instance.
1209	* @param pvUser User argument - ignored.
1210	* @param uPort Port number used for the IN operation.
1211	* @param pu32 Where to store the result.
1212	* @param cb Number of bytes read.
1213	*/
1214	PDMBOTHCBDECL(int) pciIOPortDataRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
1215	{
1216	NOREF(pvUser);
1217	if (!(Port % cb))
1218	{
1219	PCI_LOCK(pDevIns, VINF_IOM_HC_IOPORT_READ);
1220	int rc = pci_data_read(PDMINS_2_DATA(pDevIns, PPCIGLOBALS), Port, cb, pu32);
1221	PCI_UNLOCK(pDevIns);
1222	Log(("pciIOPortDataRead: Port=%#x cb=%#x -> %#x (%Rrc)\n", Port, cb, *pu32, rc));
1223	return rc;
1224	}
1225	AssertMsgFailed(("Read from port %#x cb=%d\n", Port, cb));
1226	return VERR_IOM_IOPORT_UNUSED;
1227	}
1228
1229	#ifdef IN_RING3
1230
1231	/**
1232	* Saves a state of the PCI device.
1233	*
1234	* @returns VBox status code.
1235	* @param pDevIns Device instance of the PCI Bus.
1236	* @param pPciDev Pointer to PCI device.
1237	* @param pSSMHandle The handle to save the state to.
1238	*/
1239	static DECLCALLBACK(int) pciGenericSaveExec(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PSSMHANDLE pSSMHandle)
1240	{
1241	return SSMR3PutMem(pSSMHandle, &pPciDev->config[0], sizeof(pPciDev->config));
1242	}
1243
1244
1245	/**
1246	* Loads a saved PCI device state.
1247	*
1248	* @returns VBox status code.
1249	* @param pDevIns Device instance of the PCI Bus.
1250	* @param pPciDev Pointer to PCI device.
1251	* @param pSSMHandle The handle to the saved state.
1252	*/
1253	static DECLCALLBACK(int) pciGenericLoadExec(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PSSMHANDLE pSSMHandle)
1254	{
1255	return SSMR3GetMem(pSSMHandle, &pPciDev->config[0], sizeof(pPciDev->config));
1256	}
1257
1258
1259	/**
1260	* Common worker for pciR3SaveExec and pcibridgeR3SaveExec.
1261	*
1262	* @returns VBox status code.
1263	* @param pBus The bus to save.
1264	* @param pSSM The saved state handle.
1265	*/
1266	static int pciR3CommonSaveExec(PPCIBUS pBus, PSSMHANDLE pSSM)
1267	{
1268	/*
1269	* Iterate thru all the devices.
1270	*/
1271	for (uint32_t i = 0; i < RT_ELEMENTS(pBus->devices); i++)
1272	{
1273	PPCIDEVICE pDev = pBus->devices[i];
1274	if (pDev)
1275	{
1276	SSMR3PutU32(pSSM, i);
1277	SSMR3PutMem(pSSM, pDev->config, sizeof(pDev->config));
1278
1279	int rc = SSMR3PutS32(pSSM, pDev->Int.s.uIrqPinState);
1280	if (RT_FAILURE(rc))
1281	return rc;
1282	}
1283	}
1284	return SSMR3PutU32(pSSM, UINT32_MAX); /* terminator */
1285	}
1286
1287
1288	/**
1289	* Saves a state of the PCI device.
1290	*
1291	* @returns VBox status code.
1292	* @param pDevIns The device instance.
1293	* @param pPciDev Pointer to PCI device.
1294	* @param pSSMHandle The handle to save the state to.
1295	*/
1296	static DECLCALLBACK(int) pciR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
1297	{
1298	uint32_t i;
1299	PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
1300
1301	/*
1302	* Bus state data.
1303	*/
1304	SSMR3PutU32(pSSMHandle, pThis->uConfigReg);
1305	SSMR3PutBool(pSSMHandle, pThis->fUseIoApic);
1306
1307	/*
1308	* Save IRQ states.
1309	*/
1310	for (i = 0; i < PCI_IRQ_PINS; i++)
1311	SSMR3PutU32(pSSMHandle, pThis->pci_irq_levels[i]);
1312	for (i = 0; i < PCI_APIC_IRQ_PINS; i++)
1313	SSMR3PutU32(pSSMHandle, pThis->pci_apic_irq_levels[i]);
1314
1315	SSMR3PutU32(pSSMHandle, pThis->acpi_irq_level);
1316	SSMR3PutS32(pSSMHandle, pThis->acpi_irq);
1317
1318	SSMR3PutU32(pSSMHandle, ~0); /* separator */
1319
1320	/*
1321	* Join paths with pcibridgeR3SaveExec.
1322	*/
1323	return pciR3CommonSaveExec(&pThis->PciBus, pSSMHandle);
1324	}
1325
1326
1327	/**
1328	* Common routine for restoring the config registers of a PCI device.
1329	*
1330	* @param pDev The PCI device.
1331	* @param pbSrcConfig The configuration register values to be loaded.
1332	* @param fIsBridge Whether this is a bridge device or not.
1333	*/
1334	static void pciR3CommonRestoreConfig(PPCIDEVICE pDev, uint8_t const *pbSrcConfig, bool fIsBridge)
1335	{
1336	/*
1337	* This table defines the fields for normal devices and bridge devices, and
1338	* the order in which they need to be restored.
1339	*/
1340	static const struct PciField
1341	{
1342	uint8_t off;
1343	uint8_t cb;
1344	uint8_t fWritable;
1345	uint8_t fBridge;
1346	const char *pszName;
1347	} s_aFields[] =
1348	{
1349	/* off,cb,fW,fB, pszName */
1350	{ 0x00, 2, 0, 3, "VENDOR_ID" },
1351	{ 0x02, 2, 0, 3, "DEVICE_ID" },
1352	{ 0x06, 2, 1, 3, "STATUS" },
1353	{ 0x08, 1, 0, 3, "REVISION_ID" },
1354	{ 0x09, 1, 0, 3, "CLASS_PROG" },
1355	{ 0x0a, 1, 0, 3, "CLASS_SUB" },
1356	{ 0x0b, 1, 0, 3, "CLASS_BASE" },
1357	{ 0x0c, 1, 0, 3, "CACHE_LINE_SIZE" }, // fWritable = ??
1358	{ 0x0d, 1, 0, 3, "LATENCY_TIMER" }, // fWritable = ??
1359	{ 0x0e, 1, 0, 3, "HEADER_TYPE" }, // fWritable = ??
1360	{ 0x0f, 1, 0, 3, "BIST" }, // fWritable = ??
1361	{ 0x10, 4, 1, 3, "BASE_ADDRESS_0" },
1362	{ 0x14, 4, 1, 3, "BASE_ADDRESS_1" },
1363	{ 0x18, 4, 1, 1, "BASE_ADDRESS_2" },
1364	{ 0x18, 1, 1, 2, "PRIMARY_BUS" }, // fWritable = ??
1365	{ 0x19, 1, 1, 2, "SECONDARY_BUS" }, // fWritable = ??
1366	{ 0x1a, 1, 1, 2, "SUBORDINATE_BUS" }, // fWritable = ??
1367	{ 0x1b, 1, 1, 2, "SEC_LATENCY_TIMER" }, // fWritable = ??
1368	{ 0x1c, 4, 1, 1, "BASE_ADDRESS_3" },
1369	{ 0x1c, 1, 1, 2, "IO_BASE" }, // fWritable = ??
1370	{ 0x1d, 1, 1, 2, "IO_LIMIT" }, // fWritable = ??
1371	{ 0x1e, 2, 1, 2, "SEC_STATUS" }, // fWritable = ??
1372	{ 0x20, 4, 1, 1, "BASE_ADDRESS_4" },
1373	{ 0x20, 2, 1, 2, "MEMORY_BASE" }, // fWritable = ??
1374	{ 0x22, 2, 1, 2, "MEMORY_LIMIT" }, // fWritable = ??
1375	{ 0x24, 4, 1, 1, "BASE_ADDRESS_4" },
1376	{ 0x24, 2, 1, 2, "PREF_MEMORY_BASE" }, // fWritable = ??
1377	{ 0x26, 2, 1, 2, "PREF_MEMORY_LIMIT" }, // fWritable = ??
1378	{ 0x28, 4, 1, 1, "CARDBUS_CIS" }, // fWritable = ??
1379	{ 0x28, 4, 1, 2, "PREF_BASE_UPPER32" }, // fWritable = ??
1380	{ 0x2c, 2, 0, 1, "SUBSYSTEM_VENDOR_ID" },// fWritable = !?
1381	{ 0x2c, 4, 1, 2, "PREF_LIMIT_UPPER32" },// fWritable = ??
1382	{ 0x2e, 2, 0, 1, "SUBSYSTEM_ID" }, // fWritable = !?
1383	{ 0x30, 4, 1, 1, "ROM_ADDRESS" }, // fWritable = ?!
1384	{ 0x30, 2, 1, 2, "IO_BASE_UPPER16" }, // fWritable = ?!
1385	{ 0x32, 2, 1, 2, "IO_LIMIT_UPPER16" }, // fWritable = ?!
1386	{ 0x34, 4, 0, 3, "CAPABILITY_LIST" }, // fWritable = !? cb=!?
1387	{ 0x38, 4, 1, 1, "???" }, // ???
1388	{ 0x38, 4, 1, 2, "ROM_ADDRESS_BR" }, // fWritable = !? cb=!? fBridge=!?
1389	{ 0x3c, 1, 1, 3, "INTERRUPT_LINE" }, // fBridge=??
1390	{ 0x3d, 1, 0, 3, "INTERRUPT_PIN" }, // fBridge=??
1391	{ 0x3e, 1, 0, 1, "MIN_GNT" }, // fWritable = !?
1392	{ 0x3e, 1, 1, 2, "BRIDGE_CONTROL" }, // fWritable = !? cb=!?
1393	{ 0x3f, 1, 1, 3, "MAX_LAT" }, // fWritable = !? fBridge=!?
1394	/* The COMMAND register must come last as it requires the ADDRESS
1395	registers to be restored before we pretent to change it from 0 to
1396	whatever value the guest assigned it. */
1397	{ 0x04, 2, 1, 3, "COMMAND" },
1398	};
1399
1400	#ifdef RT_STRICT
1401	/* Check that we've got full register coverage. */
1402	uint32_t bmDevice[0x40 / 32];
1403	uint32_t bmBridge[0x40 / 32];
1404	RT_ZERO(bmDevice);
1405	RT_ZERO(bmBridge);
1406	for (uint32_t i = 0; i < RT_ELEMENTS(s_aFields); i++)
1407	{
1408	uint8_t off = s_aFields[i].off;
1409	uint8_t cb = s_aFields[i].cb;
1410	uint8_t f = s_aFields[i].fBridge;
1411	while (cb-- > 0)
1412	{
1413	if (f & 1) AssertMsg(!ASMBitTest(bmDevice, off), ("%#x\n", off));
1414	if (f & 2) AssertMsg(!ASMBitTest(bmBridge, off), ("%#x\n", off));
1415	if (f & 1) ASMBitSet(bmDevice, off);
1416	if (f & 2) ASMBitSet(bmBridge, off);
1417	off++;
1418	}
1419	}
1420	for (uint32_t off = 0; off < 0x40; off++)
1421	{
1422	AssertMsg(ASMBitTest(bmDevice, off), ("%#x\n", off));
1423	AssertMsg(ASMBitTest(bmBridge, off), ("%#x\n", off));
1424	}
1425	#endif
1426
1427	/*
1428	* Loop thru the fields covering the 64 bytes of standard registers.
1429	*/
1430	uint8_t const fBridge = fIsBridge ? 2 : 1;
1431	uint8_t *pbDstConfig = &pDev->config[0];
1432	for (uint32_t i = 0; i < RT_ELEMENTS(s_aFields); i++)
1433	if (s_aFields[i].fBridge & fBridge)
1434	{
1435	uint8_t const off = s_aFields[i].off;
1436	uint8_t const cb = s_aFields[i].cb;
1437	uint32_t u32Src;
1438	uint32_t u32Dst;
1439	switch (cb)
1440	{
1441	case 1:
1442	u32Src = pbSrcConfig[off];
1443	u32Dst = pbDstConfig[off];
1444	break;
1445	case 2:
1446	u32Src = (uint16_t const )&pbSrcConfig[off];
1447	u32Dst = (uint16_t const )&pbDstConfig[off];
1448	break;
1449	case 4:
1450	u32Src = (uint32_t const )&pbSrcConfig[off];
1451	u32Dst = (uint32_t const )&pbDstConfig[off];
1452	break;
1453	default:
1454	AssertFailed();
1455	continue;
1456	}
1457
1458	if ( u32Src != u32Dst
1459	\|\| off == VBOX_PCI_COMMAND)
1460	{
1461	if (u32Src != u32Dst)
1462	{
1463	if (!s_aFields[i].fWritable)
1464	LogRel(("PCI: %8s/%u: %2u-bit field %s: %x -> %x - !READ ONLY!\n",
1465	pDev->name, pDev->pDevIns->iInstance, cb*8, s_aFields[i].pszName, u32Dst, u32Src));
1466	else
1467	LogRel(("PCI: %8s/%u: %2u-bit field %s: %x -> %x\n",
1468	pDev->name, pDev->pDevIns->iInstance, cb*8, s_aFields[i].pszName, u32Dst, u32Src));
1469	}
1470	if (off == VBOX_PCI_COMMAND)
1471	PCIDevSetCommand(pDev, 0); /* For remapping, see pciR3CommonLoadExec. */
1472	pDev->Int.s.pfnConfigWrite(pDev, off, u32Src, cb);
1473	}
1474	}
1475
1476	/*
1477	* The device dependent registers.
1478	*
1479	* We will not use ConfigWrite here as we have no clue about the size
1480	* of the registers, so the device is responsible for correctly
1481	* restoring functionality governed by these registers.
1482	*/
1483	for (uint32_t off = 0x40; off < sizeof(pDev->config); off++)
1484	if (pbDstConfig[off] != pbSrcConfig[off])
1485	{
1486	LogRel(("PCI: %8s/%u: register %02x: %02x -> %02x\n",
1487	pDev->name, pDev->pDevIns->iInstance, off, pbDstConfig[off], pbSrcConfig[off])); /** @todo make this Log() later. */
1488	pbDstConfig[off] = pbSrcConfig[off];
1489	}
1490	}
1491
1492
1493	/**
1494	* Common worker for pciR3LoadExec and pcibridgeR3LoadExec.
1495	*
1496	* @returns VBox status code.
1497	* @param pBus The bus which data is being loaded.
1498	* @param pSSMHandle The saved state handle.
1499	* @param uVersion The data version.
1500	* @param uPass The pass.
1501	*/
1502	static DECLCALLBACK(int) pciR3CommonLoadExec(PPCIBUS pBus, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass)
1503	{
1504	uint32_t u32;
1505	uint32_t i;
1506	int rc;
1507
1508	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
1509
1510	/*
1511	* Iterate thru all the devices and write 0 to the COMMAND register so
1512	* that all the memory is unmapped before we start restoring the saved
1513	* mapping locations.
1514	*
1515	* The register value is restored afterwards so we can do proper
1516	* LogRels in pciR3CommonRestoreConfig.
1517	*/
1518	for (uint32_t i = 0; i < RT_ELEMENTS(pBus->devices); i++)
1519	{
1520	PPCIDEVICE pDev = pBus->devices[i];
1521	if (pDev)
1522	{
1523	uint16_t u16 = PCIDevGetCommand(pDev);
1524	pDev->Int.s.pfnConfigWrite(pDev, VBOX_PCI_COMMAND, 0, 2);
1525	PCIDevSetCommand(pDev, u16);
1526	Assert(PCIDevGetCommand(pDev) == u16);
1527	}
1528	}
1529
1530	/*
1531	* Iterate all the devices.
1532	*/
1533	for (i = 0;; i++)
1534	{
1535	PCIDEVICE DevTmp;
1536	PPCIDEVICE pDev;
1537
1538	/* index / terminator */
1539	rc = SSMR3GetU32(pSSMHandle, &u32);
1540	if (RT_FAILURE(rc))
1541	return rc;
1542	if (u32 == (uint32_t)~0)
1543	break;
1544	if ( u32 >= RT_ELEMENTS(pBus->devices)
1545	\|\| u32 < i)
1546	{
1547	AssertMsgFailed(("u32=%#x i=%#x\n", u32, i));
1548	return rc;
1549	}
1550
1551	/* skip forward to the device checking that no new devices are present. */
1552	for (; i < u32; i++)
1553	{
1554	if (pBus->devices[i])
1555	{
1556	LogRel(("New device in slot %#x, %s (vendor=%#06x device=%#06x)\n", i, pBus->devices[i]->name,
1557	PCIDevGetVendorId(pBus->devices[i]), PCIDevGetDeviceId(pBus->devices[i])));
1558	if (SSMR3HandleGetAfter(pSSMHandle) != SSMAFTER_DEBUG_IT)
1559	AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
1560	}
1561	}
1562
1563	/* get the data */
1564	DevTmp.Int.s.uIrqPinState = ~0; /* Invalid value in case we have an older saved state to force a state change in pciSetIrq. */
1565	SSMR3GetMem(pSSMHandle, DevTmp.config, sizeof(DevTmp.config));
1566	if (uVersion < 3)
1567	{
1568	int32_t i32Temp;
1569	/* Irq value not needed anymore. */
1570	rc = SSMR3GetS32(pSSMHandle, &i32Temp);
1571	if (RT_FAILURE(rc))
1572	return rc;
1573	}
1574	else
1575	{
1576	rc = SSMR3GetS32(pSSMHandle, &DevTmp.Int.s.uIrqPinState);
1577	if (RT_FAILURE(rc))
1578	return rc;
1579	}
1580
1581	/* check that it's still around. */
1582	pDev = pBus->devices[i];
1583	if (!pDev)
1584	{
1585	LogRel(("Device in slot %#x has been removed! vendor=%#06x device=%#06x\n", i,
1586	PCIDevGetVendorId(&DevTmp), PCIDevGetDeviceId(&DevTmp)));
1587	if (SSMR3HandleGetAfter(pSSMHandle) != SSMAFTER_DEBUG_IT)
1588	AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
1589	continue;
1590	}
1591
1592	/* match the vendor id assuming that this will never be changed. */
1593	if ( DevTmp.config[0] != pDev->config[0]
1594	\|\| DevTmp.config[1] != pDev->config[1])
1595	{
1596	LogRel(("Device in slot %#x (%s) vendor id mismatch! saved=%.4Rhxs current=%.4Rhxs\n",
1597	i, pDev->name, DevTmp.config, pDev->config));
1598	AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
1599	}
1600
1601	/* commit the loaded device config. */
1602	pciR3CommonRestoreConfig(pDev, &DevTmp.config[0], false ); /** @todo fix bridge fun! */
1603
1604	pDev->Int.s.uIrqPinState = DevTmp.Int.s.uIrqPinState;
1605	}
1606
1607	return VINF_SUCCESS;
1608	}
1609
1610
1611	/**
1612	* Loads a saved PCI device state.
1613	*
1614	* @returns VBox status code.
1615	* @param pDevIns The device instance.
1616	* @param pSSMHandle The handle to the saved state.
1617	* @param uVersion The data unit version number.
1618	* @param uPass The data pass.
1619	*/
1620	static DECLCALLBACK(int) pciR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass)
1621	{
1622	PPCIGLOBALS pThis = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
1623	PPCIBUS pBus = &pThis->PciBus;
1624	uint32_t u32;
1625	uint32_t i;
1626	int rc;
1627
1628	/*
1629	* Check the version.
1630	*/
1631	if (uVersion > VBOX_PCI_SAVED_STATE_VERSION)
1632	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
1633	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
1634
1635	/*
1636	* Bus state data.
1637	*/
1638	SSMR3GetU32(pSSMHandle, &pThis->uConfigReg);
1639	if (uVersion > 1)
1640	SSMR3GetBool(pSSMHandle, &pThis->fUseIoApic);
1641
1642	/* Load IRQ states. */
1643	if (uVersion > 2)
1644	{
1645	for (uint8_t i = 0; i < PCI_IRQ_PINS; i++)
1646	SSMR3GetU32(pSSMHandle, (uint32_t *)&pThis->pci_irq_levels[i]);
1647	for (uint8_t i = 0; i < PCI_APIC_IRQ_PINS; i++)
1648	SSMR3GetU32(pSSMHandle, (uint32_t *)&pThis->pci_apic_irq_levels[i]);
1649
1650	SSMR3GetU32(pSSMHandle, &pThis->acpi_irq_level);
1651	SSMR3GetS32(pSSMHandle, &pThis->acpi_irq);
1652	}
1653
1654	/* separator */
1655	rc = SSMR3GetU32(pSSMHandle, &u32);
1656	if (RT_FAILURE(rc))
1657	return rc;
1658	if (u32 != (uint32_t)~0)
1659	AssertMsgFailedReturn(("u32=%#x\n", u32), rc);
1660
1661	/*
1662	* The devices.
1663	*/
1664	return pciR3CommonLoadExec(pBus, pSSMHandle, uVersion, uPass);
1665	}
1666
1667
1668	/* -=-=-=-=-=- real code -=-=-=-=-=- */
1669
1670	/**
1671	* Registers the device with the specified PCI bus.
1672	*
1673	* @returns VBox status code.
1674	* @param pBus The bus to register with.
1675	* @param iDev The PCI device ordinal.
1676	* @param pPciDev The PCI device structure.
1677	* @param pszName Pointer to device name (permanent, readonly). For debugging, not unique.
1678	*/
1679	static int pciRegisterInternal(PPCIBUS pBus, int iDev, PPCIDEVICE pPciDev, const char *pszName)
1680	{
1681	/*
1682	* Find device slot.
1683	*/
1684	if (iDev < 0)
1685	{
1686	/*
1687	* Special check for the IDE controller which is our function 1 device
1688	* before searching.
1689	*/
1690	if ( !strcmp(pszName, "piix3ide")
1691	&& !pBus->devices[9])
1692	iDev = 9;
1693	#ifdef VBOX_WITH_LPC
1694	/* LPC bus expected to be there by some guests, better make an additional argument to PDM
1695	device helpers, but requires significant rewrite */
1696	else if (!strcmp(pszName, "lpc")
1697	&& !pBus->devices[0xf8])
1698	iDev = 0xf8;
1699	#endif
1700	else
1701	{
1702	Assert(!(pBus->iDevSearch % 8));
1703	for (iDev = pBus->iDevSearch; iDev < (int)RT_ELEMENTS(pBus->devices); iDev += 8)
1704	if ( !pBus->devices[iDev]
1705	&& !pBus->devices[iDev + 1]
1706	&& !pBus->devices[iDev + 2]
1707	&& !pBus->devices[iDev + 3]
1708	&& !pBus->devices[iDev + 4]
1709	&& !pBus->devices[iDev + 5]
1710	&& !pBus->devices[iDev + 6]
1711	&& !pBus->devices[iDev + 7])
1712	break;
1713	if (iDev >= (int)RT_ELEMENTS(pBus->devices))
1714	{
1715	AssertMsgFailed(("Couldn't find free spot!\n"));
1716	return VERR_PDM_TOO_PCI_MANY_DEVICES;
1717	}
1718	}
1719	pPciDev->Int.s.fRequestedDevFn = false;
1720	}
1721	else
1722	{
1723	/*
1724	* An explicit request.
1725	*
1726	* If the slot is occupied we'll have to relocate the device
1727	* currently occupying it first. This can only be done if the
1728	* existing device wasn't explicitly assigned. Also we limit
1729	* ourselves to function 0 devices.
1730	*
1731	* If you start setting devices + function in the
1732	* config, do it for all pci devices!
1733	*/
1734	//AssertReleaseMsg(iDev > 8 \|\| pBus->iBus != 0, ("iDev=%d pszName=%s\n", iDev, pszName));
1735	if (pBus->devices[iDev])
1736	{
1737	int iDevRel;
1738	AssertReleaseMsg(!(iDev % 8), ("PCI Configuration Conflict! iDev=%d pszName=%s clashes with %s\n",
1739	iDev, pszName, pBus->devices[iDev]->name));
1740	if ( pBus->devices[iDev]->Int.s.fRequestedDevFn
1741	\|\| (pBus->devices[iDev + 1] && pBus->devices[iDev + 1]->Int.s.fRequestedDevFn)
1742	\|\| (pBus->devices[iDev + 2] && pBus->devices[iDev + 2]->Int.s.fRequestedDevFn)
1743	\|\| (pBus->devices[iDev + 3] && pBus->devices[iDev + 3]->Int.s.fRequestedDevFn)
1744	\|\| (pBus->devices[iDev + 4] && pBus->devices[iDev + 4]->Int.s.fRequestedDevFn)
1745	\|\| (pBus->devices[iDev + 5] && pBus->devices[iDev + 5]->Int.s.fRequestedDevFn)
1746	\|\| (pBus->devices[iDev + 6] && pBus->devices[iDev + 6]->Int.s.fRequestedDevFn)
1747	\|\| (pBus->devices[iDev + 7] && pBus->devices[iDev + 7]->Int.s.fRequestedDevFn))
1748	{
1749	AssertReleaseMsgFailed(("Configuration error:'%s' and '%s' are both configured as device %d\n",
1750	pszName, pBus->devices[iDev]->name, iDev));
1751	return VERR_INTERNAL_ERROR;
1752	}
1753
1754	/* Find free slot for the device(s) we're moving and move them. */
1755	for (iDevRel = pBus->iDevSearch; iDevRel < (int)RT_ELEMENTS(pBus->devices); iDevRel += 8)
1756	{
1757	if ( !pBus->devices[iDevRel]
1758	&& !pBus->devices[iDevRel + 1]
1759	&& !pBus->devices[iDevRel + 2]
1760	&& !pBus->devices[iDevRel + 3]
1761	&& !pBus->devices[iDevRel + 4]
1762	&& !pBus->devices[iDevRel + 5]
1763	&& !pBus->devices[iDevRel + 6]
1764	&& !pBus->devices[iDevRel + 7])
1765	{
1766	int i = 0;
1767	for (i = 0; i < 8; i++)
1768	{
1769	if (!pBus->devices[iDev + i])
1770	continue;
1771	Log(("PCI: relocating '%s' from slot %#x to %#x\n", pBus->devices[iDev + i]->name, iDev + i, iDevRel + i));
1772	pBus->devices[iDevRel + i] = pBus->devices[iDev + i];
1773	pBus->devices[iDevRel + i]->devfn = i;
1774	pBus->devices[iDev + i] = NULL;
1775	}
1776	}
1777	}
1778	if (pBus->devices[iDev])
1779	{
1780	AssertMsgFailed(("Couldn't find free spot!\n"));
1781	return VERR_PDM_TOO_PCI_MANY_DEVICES;
1782	}
1783	} /* if conflict */
1784	pPciDev->Int.s.fRequestedDevFn = true;
1785	}
1786
1787	Assert(!pBus->devices[iDev]);
1788	pPciDev->devfn = iDev;
1789	pPciDev->name = pszName;
1790	pPciDev->Int.s.pBusR3 = pBus;
1791	pPciDev->Int.s.pBusR0 = MMHyperR3ToR0(PDMDevHlpGetVM(pBus->CTX_SUFF(pDevIns)), pBus);
1792	pPciDev->Int.s.pBusRC = MMHyperR3ToRC(PDMDevHlpGetVM(pBus->CTX_SUFF(pDevIns)), pBus);
1793	pPciDev->Int.s.pfnConfigRead = pci_default_read_config;
1794	pPciDev->Int.s.pfnConfigWrite = pci_default_write_config;
1795	pBus->devices[iDev] = pPciDev;
1796	if (pPciDev->Int.s.fPciToPciBridge)
1797	{
1798	AssertMsg(pBus->cBridges < RT_ELEMENTS(pBus->devices), ("Number of bridges exceeds the number of possible devices on the bus\n"));
1799	AssertMsg(pPciDev->Int.s.pfnBridgeConfigRead && pPciDev->Int.s.pfnBridgeConfigWrite,
1800	("device is a bridge but does not implement read/write functions\n"));
1801	pBus->papBridgesR3[pBus->cBridges] = pPciDev;
1802	pBus->cBridges++;
1803	}
1804
1805	Log(("PCI: Registered device %d function %d (%#x) '%s'.\n",
1806	iDev >> 3, iDev & 7, 0x80000000 \| (iDev << 8), pszName));
1807
1808	return VINF_SUCCESS;
1809	}
1810
1811
1812	/**
1813	* Registers the device with the default PCI bus.
1814	*
1815	* @returns VBox status code.
1816	* @param pDevIns Device instance of the PCI Bus.
1817	* @param pPciDev The PCI device structure.
1818	* Any PCI enabled device must keep this in it's instance data!
1819	* Fill in the PCI data config before registration, please.
1820	* @param pszName Pointer to device name (permanent, readonly). For debugging, not unique.
1821	* @param iDev The PCI device number. Use a negative value for auto assigning one.
1822	*/
1823	static DECLCALLBACK(int) pciRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, const char *pszName, int iDev)
1824	{
1825	PPCIBUS pBus = DEVINS_2_PCIBUS(pDevIns);
1826
1827	/*
1828	* Check input.
1829	*/
1830	if ( !pszName
1831	\|\| !pPciDev
1832	\|\| iDev >= (int)RT_ELEMENTS(pBus->devices)
1833	\|\| (iDev >= 0 && iDev <= 8))
1834	{
1835	AssertMsgFailed(("Invalid argument! pszName=%s pPciDev=%p iDev=%d\n", pszName, pPciDev, iDev));
1836	return VERR_INVALID_PARAMETER;
1837	}
1838
1839	/*
1840	* Register the device.
1841	*/
1842	return pciRegisterInternal(pBus, iDev, pPciDev, pszName);
1843	}
1844
1845
1846	static DECLCALLBACK(int) pciIORegionRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iRegion, uint32_t cbRegion, PCIADDRESSSPACE enmType, PFNPCIIOREGIONMAP pfnCallback)
1847	{
1848	/*
1849	* Validate.
1850	*/
1851	AssertMsgReturn( enmType == PCI_ADDRESS_SPACE_MEM
1852	\|\| enmType == PCI_ADDRESS_SPACE_IO
1853	\|\| enmType == PCI_ADDRESS_SPACE_MEM_PREFETCH,
1854	("Invalid enmType=%#x? Or was this a bitmask after all...\n", enmType),
1855	VERR_INVALID_PARAMETER);
1856	AssertMsgReturn((unsigned)iRegion < PCI_NUM_REGIONS,
1857	("Invalid iRegion=%d PCI_NUM_REGIONS=%d\n", iRegion, PCI_NUM_REGIONS),
1858	VERR_INVALID_PARAMETER);
1859	int iLastSet = ASMBitLastSetU32(cbRegion);
1860	AssertMsgReturn( iLastSet != 0
1861	&& RT_BIT_32(iLastSet - 1) == cbRegion,
1862	("Invalid cbRegion=%#x iLastSet=%#x (not a power of 2 or 0)\n", cbRegion, iLastSet),
1863	VERR_INVALID_PARAMETER);
1864
1865	/*
1866	* Register the I/O region.
1867	*/
1868	PPCIIOREGION pRegion = &pPciDev->Int.s.aIORegions[iRegion];
1869	pRegion->addr = ~0U;
1870	pRegion->size = cbRegion;
1871	pRegion->type = enmType;
1872	pRegion->map_func = pfnCallback;
1873
1874	/* Set type in the config space. */
1875	uint32_t u32Address = 0x10 + iRegion * 4;
1876	uint32_t u32Value = (enmType == PCI_ADDRESS_SPACE_MEM_PREFETCH ? (1 << 3) : 0)
1877	\| (enmType == PCI_ADDRESS_SPACE_IO ? 1 : 0);
1878	(uint32_t )(pPciDev->config + u32Address) = RT_H2LE_U32(u32Value);
1879
1880	return VINF_SUCCESS;
1881	}
1882
1883
1884	/**
1885	* @copydoc PDMPCIBUSREG::pfnSetConfigCallbacksR3
1886	*/
1887	static DECLCALLBACK(void) pciSetConfigCallbacks(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, PFNPCICONFIGREAD pfnRead, PPFNPCICONFIGREAD ppfnReadOld,
1888	PFNPCICONFIGWRITE pfnWrite, PPFNPCICONFIGWRITE ppfnWriteOld)
1889	{
1890	if (ppfnReadOld)
1891	*ppfnReadOld = pPciDev->Int.s.pfnConfigRead;
1892	pPciDev->Int.s.pfnConfigRead = pfnRead;
1893
1894	if (ppfnWriteOld)
1895	*ppfnWriteOld = pPciDev->Int.s.pfnConfigWrite;
1896	pPciDev->Int.s.pfnConfigWrite = pfnWrite;
1897	}
1898
1899
1900	/**
1901	* Called to perform the job of the bios.
1902	*
1903	* @returns VBox status.
1904	* @param pDevIns Device instance of the first bus.
1905	*/
1906	static DECLCALLBACK(int) pciFakePCIBIOS(PPDMDEVINS pDevIns)
1907	{
1908	int rc;
1909	unsigned i;
1910	uint8_t elcr[2] = {0, 0};
1911	PPCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
1912	PVM pVM = PDMDevHlpGetVM(pDevIns);
1913	Assert(pVM);
1914
1915	/*
1916	* Set the start addresses.
1917	*/
1918	pGlobals->pci_bios_io_addr = 0xd000;
1919	pGlobals->pci_bios_mem_addr = UINT32_C(0xf0000000);
1920	pGlobals->uBus = 0;
1921
1922	/*
1923	* Activate IRQ mappings.
1924	*/
1925	for (i = 0; i < 4; i++)
1926	{
1927	uint8_t irq = pci_irqs[i];
1928	/* Set to trigger level. */
1929	elcr[irq >> 3] \|= (1 << (irq & 7));
1930	/* Activate irq remapping in PIIX3. */
1931	pci_config_writeb(pGlobals, 0, pGlobals->PIIX3State.dev.devfn, 0x60 + i, irq);
1932	}
1933
1934	/* Tell to the PIC. */
1935	VBOXSTRICTRC rcStrict = IOMIOPortWrite(pVM, 0x4d0, elcr[0], sizeof(uint8_t));
1936	if (rcStrict == VINF_SUCCESS)
1937	rcStrict = IOMIOPortWrite(pVM, 0x4d1, elcr[1], sizeof(uint8_t));
1938	if (rcStrict != VINF_SUCCESS)
1939	{
1940	AssertMsgFailed(("Writing to PIC failed! rcStrict=%Rrc\n", VBOXSTRICTRC_VAL(rcStrict)));
1941	return RT_SUCCESS(rcStrict) ? VERR_INTERNAL_ERROR : VBOXSTRICTRC_VAL(rcStrict);
1942	}
1943
1944	/*
1945	* Init the devices.
1946	*/
1947	for (i = 0; i < 256; i++)
1948	{
1949	uint8_t aBridgePositions[256];
1950
1951	memset(aBridgePositions, 0, sizeof(aBridgePositions));
1952	Log2(("PCI: Initializing device %d (%#x)\n",
1953	i, 0x80000000 \| (i << 8)));
1954	pci_bios_init_device(pGlobals, 0, i, 0, aBridgePositions);
1955	}
1956
1957	return VINF_SUCCESS;
1958	}
1959
1960	/**
1961	* @copydoc FNPDMDEVRELOCATE
1962	*/
1963	static DECLCALLBACK(void) pciRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
1964	{
1965	PPCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
1966	PPCIBUS pBus = &pGlobals->PciBus;
1967	pGlobals->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
1968
1969	pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns);
1970	pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
1971
1972	/* Relocate RC pointers for the attached pci devices. */
1973	for (uint32_t i = 0; i < RT_ELEMENTS(pBus->devices); i++)
1974	{
1975	if (pBus->devices[i])
1976	pBus->devices[i]->Int.s.pBusRC += offDelta;
1977	}
1978	}
1979
1980
1981	/**
1982	* Construct a host to PCI Bus device instance for a VM.
1983	*
1984	* @returns VBox status.
1985	* @param pDevIns The device instance data.
1986	* If the registration structure is needed, pDevIns->pDevReg points to it.
1987	* @param iInstance Instance number. Use this to figure out which registers and such to use.
1988	* The device number is also found in pDevIns->iInstance, but since it's
1989	* likely to be freqently used PDM passes it as parameter.
1990	* @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration
1991	* of the device instance. It's also found in pDevIns->pCfgHandle, but like
1992	* iInstance it's expected to be used a bit in this function.
1993	*/
1994	static DECLCALLBACK(int) pciConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle)
1995	{
1996	int rc;
1997	Assert(iInstance == 0);
1998
1999	/*
2000	* Validate and read configuration.
2001	*/
2002	if (!CFGMR3AreValuesValid(pCfgHandle, "IOAPIC\0" "GCEnabled\0" "R0Enabled\0"))
2003	return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
2004
2005	/* query whether we got an IOAPIC */
2006	bool fUseIoApic;
2007	rc = CFGMR3QueryBoolDef(pCfgHandle, "IOAPIC", &fUseIoApic, false);
2008	if (RT_FAILURE(rc))
2009	return PDMDEV_SET_ERROR(pDevIns, rc,
2010	N_("Configuration error: Failed to query boolean value \"IOAPIC\""));
2011
2012	/* check if RC code is enabled. */
2013	bool fGCEnabled;
2014	rc = CFGMR3QueryBoolDef(pCfgHandle, "GCEnabled", &fGCEnabled, true);
2015	if (RT_FAILURE(rc))
2016	return PDMDEV_SET_ERROR(pDevIns, rc,
2017	N_("Configuration error: Failed to query boolean value \"GCEnabled\""));
2018
2019	/* check if R0 code is enabled. */
2020	bool fR0Enabled;
2021	rc = CFGMR3QueryBoolDef(pCfgHandle, "R0Enabled", &fR0Enabled, true);
2022	if (RT_FAILURE(rc))
2023	return PDMDEV_SET_ERROR(pDevIns, rc,
2024	N_("Configuration error: Failed to query boolean value \"R0Enabled\""));
2025	Log(("PCI: fUseIoApic=%RTbool fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fUseIoApic, fGCEnabled, fR0Enabled));
2026
2027	/*
2028	* Init data and register the PCI bus.
2029	*/
2030	PPCIGLOBALS pGlobals = PDMINS_2_DATA(pDevIns, PPCIGLOBALS);
2031	pGlobals->pci_bios_io_addr = 0xc000;
2032	pGlobals->pci_bios_mem_addr = 0xf0000000;
2033	memset((void *)&pGlobals->pci_irq_levels, 0, sizeof(pGlobals->pci_irq_levels));
2034	pGlobals->fUseIoApic = fUseIoApic;
2035	memset((void *)&pGlobals->pci_apic_irq_levels, 0, sizeof(pGlobals->pci_apic_irq_levels));
2036
2037	pGlobals->pDevInsR3 = pDevIns;
2038	pGlobals->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
2039	pGlobals->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
2040
2041	pGlobals->PciBus.pDevInsR3 = pDevIns;
2042	pGlobals->PciBus.pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
2043	pGlobals->PciBus.pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
2044	pGlobals->PciBus.papBridgesR3 = (PPCIDEVICE )PDMDevHlpMMHeapAllocZ(pDevIns, sizeof(PPCIDEVICE) RT_ELEMENTS(pGlobals->PciBus.devices));
2045
2046	PDMPCIBUSREG PciBusReg;
2047	PPCIBUS pBus = &pGlobals->PciBus;
2048	PciBusReg.u32Version = PDM_PCIBUSREG_VERSION;
2049	PciBusReg.pfnRegisterR3 = pciRegister;
2050	PciBusReg.pfnIORegionRegisterR3 = pciIORegionRegister;
2051	PciBusReg.pfnSetConfigCallbacksR3 = pciSetConfigCallbacks;
2052	PciBusReg.pfnSetIrqR3 = pciSetIrq;
2053	PciBusReg.pfnSaveExecR3 = pciGenericSaveExec;
2054	PciBusReg.pfnLoadExecR3 = pciGenericLoadExec;
2055	PciBusReg.pfnFakePCIBIOSR3 = pciFakePCIBIOS;
2056	PciBusReg.pszSetIrqRC = fGCEnabled ? "pciSetIrq" : NULL;
2057	PciBusReg.pszSetIrqR0 = fR0Enabled ? "pciSetIrq" : NULL;
2058	rc = pDevIns->pDevHlpR3->pfnPCIBusRegister(pDevIns, &PciBusReg, &pBus->pPciHlpR3);
2059	if (RT_FAILURE(rc))
2060	return PDMDEV_SET_ERROR(pDevIns, rc,
2061	N_("Failed to register ourselves as a PCI Bus"));
2062	if (pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION)
2063	return PDMDevHlpVMSetError(pDevIns, VERR_VERSION_MISMATCH, RT_SRC_POS,
2064	N_("PCI helper version mismatch; got %#x expected %#x"),
2065	pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION);
2066
2067	pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns);
2068	pBus->pPciHlpR0 = pBus->pPciHlpR3->pfnGetR0Helpers(pDevIns);
2069
2070	/*
2071	* Fill in PCI configs and add them to the bus.
2072	*/
2073	/* i440FX */
2074	PCIDevSetVendorId( &pBus->PciDev, 0x8086); /* Intel */
2075	PCIDevSetDeviceId( &pBus->PciDev, 0x1237);
2076	PCIDevSetRevisionId(&pBus->PciDev, 0x02);
2077	PCIDevSetClassSub( &pBus->PciDev, 0x00); /* host2pci */
2078	PCIDevSetClassBase( &pBus->PciDev, 0x06); /* PCI_bridge */
2079	PCIDevSetHeaderType(&pBus->PciDev, 0x00);
2080
2081	pBus->PciDev.pDevIns = pDevIns;
2082	pBus->PciDev.Int.s.fRequestedDevFn= true;
2083	pciRegisterInternal(pBus, 0, &pBus->PciDev, "i440FX");
2084
2085	/* PIIX3 */
2086	PCIDevSetVendorId( &pGlobals->PIIX3State.dev, 0x8086); /* Intel */
2087	PCIDevSetDeviceId( &pGlobals->PIIX3State.dev, 0x7000); /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
2088	PCIDevSetClassSub( &pGlobals->PIIX3State.dev, 0x01); /* PCI_ISA */
2089	PCIDevSetClassBase( &pGlobals->PIIX3State.dev, 0x06); /* PCI_bridge */
2090	PCIDevSetHeaderType(&pGlobals->PIIX3State.dev, 0x80); /* PCI_multifunction, generic */
2091
2092	pGlobals->PIIX3State.dev.pDevIns = pDevIns;
2093	pGlobals->PIIX3State.dev.Int.s.fRequestedDevFn= true;
2094	pciRegisterInternal(pBus, 8, &pGlobals->PIIX3State.dev, "PIIX3");
2095	piix3_reset(&pGlobals->PIIX3State);
2096
2097	pBus->iDevSearch = 16;
2098
2099	/*
2100	* Register I/O ports and save state.
2101	*/
2102	rc = PDMDevHlpIOPortRegister(pDevIns, 0x0cf8, 1, NULL, pciIOPortAddressWrite, pciIOPortAddressRead, NULL, NULL, "i440FX (PCI)");
2103	if (RT_FAILURE(rc))
2104	return rc;
2105	rc = PDMDevHlpIOPortRegister(pDevIns, 0x0cfc, 4, NULL, pciIOPortDataWrite, pciIOPortDataRead, NULL, NULL, "i440FX (PCI)");
2106	if (RT_FAILURE(rc))
2107	return rc;
2108	if (fGCEnabled)
2109	{
2110	rc = PDMDevHlpIOPortRegisterGC(pDevIns, 0x0cf8, 1, NIL_RTGCPTR, "pciIOPortAddressWrite", "pciIOPortAddressRead", NULL, NULL, "i440FX (PCI)");
2111	if (RT_FAILURE(rc))
2112	return rc;
2113	rc = PDMDevHlpIOPortRegisterGC(pDevIns, 0x0cfc, 4, NIL_RTGCPTR, "pciIOPortDataWrite", "pciIOPortDataRead", NULL, NULL, "i440FX (PCI)");
2114	if (RT_FAILURE(rc))
2115	return rc;
2116	}
2117	if (fR0Enabled)
2118	{
2119	rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x0cf8, 1, NIL_RTR0PTR, "pciIOPortAddressWrite", "pciIOPortAddressRead", NULL, NULL, "i440FX (PCI)");
2120	if (RT_FAILURE(rc))
2121	return rc;
2122	rc = PDMDevHlpIOPortRegisterR0(pDevIns, 0x0cfc, 4, NIL_RTR0PTR, "pciIOPortDataWrite", "pciIOPortDataRead", NULL, NULL, "i440FX (PCI)");
2123	if (RT_FAILURE(rc))
2124	return rc;
2125	}
2126
2127	rc = PDMDevHlpSSMRegisterEx(pDevIns, VBOX_PCI_SAVED_STATE_VERSION, sizeof(pBus) + 16128, "pgm",
2128	NULL, NULL, NULL,
2129	NULL, pciR3SaveExec, NULL,
2130	NULL, pciR3LoadExec, NULL);
2131	if (RT_FAILURE(rc))
2132	return rc;
2133
2134	return VINF_SUCCESS;
2135	}
2136
2137
2138	/**
2139	* The device registration structure.
2140	*/
2141	const PDMDEVREG g_DevicePCI =
2142	{
2143	/* u32Version */
2144	PDM_DEVREG_VERSION,
2145	/* szDeviceName */
2146	"pci",
2147	/* szRCMod */
2148	"VBoxDDGC.gc",
2149	/* szR0Mod */
2150	"VBoxDDR0.r0",
2151	/* pszDescription */
2152	"i440FX PCI bridge and PIIX3 ISA bridge.",
2153	/* fFlags */
2154	PDM_DEVREG_FLAGS_DEFAULT_BITS \| PDM_DEVREG_FLAGS_RC \| PDM_DEVREG_FLAGS_R0,
2155	/* fClass */
2156	PDM_DEVREG_CLASS_BUS_PCI \| PDM_DEVREG_CLASS_BUS_ISA,
2157	/* cMaxInstances */
2158	1,
2159	/* cbInstance */
2160	sizeof(PCIGLOBALS),
2161	/* pfnConstruct */
2162	pciConstruct,
2163	/* pfnDestruct */
2164	NULL,
2165	/* pfnRelocate */
2166	pciRelocate,
2167	/* pfnIOCtl */
2168	NULL,
2169	/* pfnPowerOn */
2170	NULL,
2171	/* pfnReset */
2172	NULL,
2173	/* pfnSuspend */
2174	NULL,
2175	/* pfnResume */
2176	NULL,
2177	/* pfnAttach */
2178	NULL,
2179	/* pfnDetach */
2180	NULL,
2181	/* pfnQueryInterface */
2182	NULL,
2183	/* pfnInitComplete */
2184	NULL,
2185	/* pfnPowerOff */
2186	NULL,
2187	/* pfnSoftReset */
2188	NULL,
2189	/* u32VersionEnd */
2190	PDM_DEVREG_VERSION
2191
2192	};
2193	#endif /* IN_RING3 */
2194
2195	/**
2196	* Set the IRQ for a PCI device on a secondary bus.
2197	*
2198	* @param pDevIns Device instance of the PCI Bus.
2199	* @param pPciDev The PCI device structure.
2200	* @param iIrq IRQ number to set.
2201	* @param iLevel IRQ level.
2202	*/
2203	PDMBOTHCBDECL(void) pcibridgeSetIrq(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, int iIrq, int iLevel)
2204	{
2205	/*
2206	* The PCI-to-PCI bridge specification defines how the interrupt pins
2207	* are routed from the secondary to the primary bus (see chapter 9).
2208	* iIrq gives the interrupt pin the pci device asserted.
2209	* We change iIrq here according to the spec and call the SetIrq function
2210	* of our parent passing the device which asserted the interrupt instead of the device of the bridge.
2211	*/
2212	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2213	int iIrqPinBridge = 0;
2214	uint8_t uDevFnBridge = pPciDev->devfn;
2215
2216	/* Walk the chain until we reach the host bus. */
2217	while (pBus->iBus != 0)
2218	{
2219	uDevFnBridge = pBus->PciDev.devfn;
2220	iIrqPinBridge = ((uDevFnBridge >> 3) + iIrqPinBridge) & 3;
2221	/* Get the parent. */
2222	pBus = pBus->PciDev.Int.s.CTX_SUFF(pBus);
2223	}
2224
2225	AssertMsg(pBus->iBus == 0, ("This is not the host pci bus iBus=%d\n", pBus->iBus));
2226	pciSetIrqInternal(PCIBUS_2_PCIGLOBALS(pBus), uDevFnBridge, pPciDev, iIrqPinBridge, iLevel);
2227	}
2228
2229	#ifdef IN_RING3
2230
2231	static void pcibridgeConfigWrite(PPDMDEVINSR3 pDevIns, uint8_t iBus, uint8_t iDevice, uint32_t u32Address, uint32_t u32Value, unsigned cb)
2232	{
2233	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2234
2235	LogFlowFunc((": pDevIns=%p iBus=%d iDevice=%d u32Address=%u u32Value=%u cb=%d\n", pDevIns, iBus, iDevice, u32Address, u32Value, cb));
2236
2237	/* If the current bus is not the target bus search for the bus which contains the device. */
2238	if (iBus != pBus->PciDev.config[VBOX_PCI_SECONDARY_BUS])
2239	{
2240	PPCIDEVICE pBridgeDevice = pciFindBridge(pBus, iBus);
2241	if (pBridgeDevice)
2242	{
2243	AssertPtr(pBridgeDevice->Int.s.pfnBridgeConfigWrite);
2244	pBridgeDevice->Int.s.pfnBridgeConfigWrite(pBridgeDevice->pDevIns, iBus, iDevice, u32Address, u32Value, cb);
2245	}
2246	}
2247	else
2248	{
2249	/* This is the target bus, pass the write to the device. */
2250	PPCIDEVICE pPciDev = pBus->devices[iDevice];
2251	if (pPciDev)
2252	{
2253	Log(("%s: %s: addr=%02x val=%08x len=%d\n", __FUNCTION__, pPciDev->name, u32Address, u32Value, cb));
2254	pPciDev->Int.s.pfnConfigWrite(pPciDev, u32Address, u32Value, cb);
2255	}
2256	}
2257	}
2258
2259	static uint32_t pcibridgeConfigRead(PPDMDEVINSR3 pDevIns, uint8_t iBus, uint8_t iDevice, uint32_t u32Address, unsigned cb)
2260	{
2261	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2262	uint32_t u32Value = 0xffffffff; /* Return value in case there is no device. */
2263
2264	LogFlowFunc((": pDevIns=%p iBus=%d iDevice=%d u32Address=%u cb=%d\n", pDevIns, iBus, iDevice, u32Address, cb));
2265
2266	/* If the current bus is not the target bus search for the bus which contains the device. */
2267	if (iBus != pBus->PciDev.config[VBOX_PCI_SECONDARY_BUS])
2268	{
2269	PPCIDEVICE pBridgeDevice = pciFindBridge(pBus, iBus);
2270	if (pBridgeDevice)
2271	{
2272	AssertPtr( pBridgeDevice->Int.s.pfnBridgeConfigRead);
2273	u32Value = pBridgeDevice->Int.s.pfnBridgeConfigRead(pBridgeDevice->pDevIns, iBus, iDevice, u32Address, cb);
2274	}
2275	}
2276	else
2277	{
2278	/* This is the target bus, pass the read to the device. */
2279	PPCIDEVICE pPciDev = pBus->devices[iDevice];
2280	if (pPciDev)
2281	{
2282	u32Value = pPciDev->Int.s.pfnConfigRead(pPciDev, u32Address, cb);
2283	Log(("%s: %s: u32Address=%02x u32Value=%08x cb=%d\n", __FUNCTION__, pPciDev->name, u32Address, u32Value, cb));
2284	}
2285	}
2286
2287	return u32Value;
2288	}
2289
2290	/**
2291	* Saves a state of a PCI bridge device.
2292	*
2293	* @returns VBox status code.
2294	* @param pDevIns The device instance.
2295	* @param pPciDev Pointer to PCI device.
2296	* @param pSSMHandle The handle to save the state to.
2297	*/
2298	static DECLCALLBACK(int) pcibridgeR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
2299	{
2300	PPCIBUS pThis = PDMINS_2_DATA(pDevIns, PPCIBUS);
2301	return pciR3CommonSaveExec(pThis, pSSMHandle);
2302	}
2303
2304
2305	/**
2306	* Loads a saved PCI bridge device state.
2307	*
2308	* @returns VBox status code.
2309	* @param pDevIns The device instance.
2310	* @param pSSMHandle The handle to the saved state.
2311	* @param uVersion The data unit version number.
2312	* @param uPass The data pass.
2313	*/
2314	static DECLCALLBACK(int) pcibridgeR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass)
2315	{
2316	PPCIBUS pThis = PDMINS_2_DATA(pDevIns, PPCIBUS);
2317	if (uVersion > VBOX_PCI_SAVED_STATE_VERSION)
2318	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
2319	return pciR3CommonLoadExec(pThis, pSSMHandle, uVersion, uPass);
2320	}
2321
2322	/**
2323	* @copydoc FNPDMDEVRESET
2324	*/
2325	static DECLCALLBACK(void) pcibridgeReset(PPDMDEVINS pDevIns)
2326	{
2327	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2328
2329	/* Reset config space to default values. */
2330	pBus->PciDev.config[VBOX_PCI_PRIMARY_BUS] = 0;
2331	pBus->PciDev.config[VBOX_PCI_SECONDARY_BUS] = 0;
2332	pBus->PciDev.config[VBOX_PCI_SUBORDINATE_BUS] = 0;
2333	}
2334
2335	/**
2336	* @copydoc FNPDMDEVRELOCATE
2337	*/
2338	static DECLCALLBACK(void) pcibridgeRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
2339	{
2340	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2341	pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
2342
2343	/* Relocate RC pointers for the attached pci devices. */
2344	for (uint32_t i = 0; i < RT_ELEMENTS(pBus->devices); i++)
2345	{
2346	if (pBus->devices[i])
2347	pBus->devices[i]->Int.s.pBusRC += offDelta;
2348	}
2349	}
2350
2351	/**
2352	* Registers the device with the default PCI bus.
2353	*
2354	* @returns VBox status code.
2355	* @param pDevIns Device instance of the PCI Bus.
2356	* @param pPciDev The PCI device structure.
2357	* Any PCI enabled device must keep this in it's instance data!
2358	* Fill in the PCI data config before registration, please.
2359	* @param pszName Pointer to device name (permanent, readonly). For debugging, not unique.
2360	* @param iDev The PCI device number. Use a negative value for auto assigning one.
2361	*/
2362	static DECLCALLBACK(int) pcibridgeRegister(PPDMDEVINS pDevIns, PPCIDEVICE pPciDev, const char *pszName, int iDev)
2363	{
2364	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2365
2366	/*
2367	* Check input.
2368	*/
2369	if ( !pszName
2370	\|\| !pPciDev
2371	\|\| iDev >= (int)RT_ELEMENTS(pBus->devices))
2372	{
2373	AssertMsgFailed(("Invalid argument! pszName=%s pPciDev=%p iDev=%d\n", pszName, pPciDev, iDev));
2374	return VERR_INVALID_PARAMETER;
2375	}
2376
2377	/*
2378	* Register the device.
2379	*/
2380	return pciRegisterInternal(pBus, iDev, pPciDev, pszName);
2381	}
2382
2383	/**
2384	* Construct a PCI bridge device instance for a VM.
2385	*
2386	* @returns VBox status.
2387	* @param pDevIns The device instance data.
2388	* If the registration structure is needed, pDevIns->pDevReg points to it.
2389	* @param iInstance Instance number. Use this to figure out which registers and such to use.
2390	* The device number is also found in pDevIns->iInstance, but since it's
2391	* likely to be freqently used PDM passes it as parameter.
2392	* @param pCfgHandle Configuration node handle for the device. Use this to obtain the configuration
2393	* of the device instance. It's also found in pDevIns->pCfgHandle, but like
2394	* iInstance it's expected to be used a bit in this function.
2395	*/
2396	static DECLCALLBACK(int) pcibridgeConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfgHandle)
2397	{
2398	int rc;
2399
2400	/*
2401	* Validate and read configuration.
2402	*/
2403	if (!CFGMR3AreValuesValid(pCfgHandle, "GCEnabled\0" "R0Enabled\0"))
2404	return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
2405
2406	/* check if RC code is enabled. */
2407	bool fGCEnabled;
2408	rc = CFGMR3QueryBoolDef(pCfgHandle, "GCEnabled", &fGCEnabled, true);
2409	if (RT_FAILURE(rc))
2410	return PDMDEV_SET_ERROR(pDevIns, rc,
2411	N_("Configuration error: Failed to query boolean value \"GCEnabled\""));
2412
2413	/* check if R0 code is enabled. */
2414	bool fR0Enabled;
2415	rc = CFGMR3QueryBoolDef(pCfgHandle, "R0Enabled", &fR0Enabled, true);
2416	if (RT_FAILURE(rc))
2417	return PDMDEV_SET_ERROR(pDevIns, rc,
2418	N_("Configuration error: Failed to query boolean value \"R0Enabled\""));
2419	Log(("PCI: fGCEnabled=%RTbool fR0Enabled=%RTbool\n", fGCEnabled, fR0Enabled));
2420
2421	/*
2422	* Init data and register the PCI bus.
2423	*/
2424	PPCIBUS pBus = PDMINS_2_DATA(pDevIns, PPCIBUS);
2425	pBus->pDevInsR3 = pDevIns;
2426	pBus->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
2427	pBus->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
2428	pBus->papBridgesR3 = (PPCIDEVICE )PDMDevHlpMMHeapAllocZ(pDevIns, sizeof(PPCIDEVICE) RT_ELEMENTS(pBus->devices));
2429
2430	PDMPCIBUSREG PciBusReg;
2431	PciBusReg.u32Version = PDM_PCIBUSREG_VERSION;
2432	PciBusReg.pfnRegisterR3 = pcibridgeRegister;
2433	PciBusReg.pfnIORegionRegisterR3 = pciIORegionRegister;
2434	PciBusReg.pfnSetConfigCallbacksR3 = pciSetConfigCallbacks;
2435	PciBusReg.pfnSetIrqR3 = pcibridgeSetIrq;
2436	PciBusReg.pfnSaveExecR3 = pciGenericSaveExec;
2437	PciBusReg.pfnLoadExecR3 = pciGenericLoadExec;
2438	PciBusReg.pfnFakePCIBIOSR3 = NULL; /* Only needed for the first bus. */
2439	PciBusReg.pszSetIrqRC = fGCEnabled ? "pcibridgeSetIrq" : NULL;
2440	PciBusReg.pszSetIrqR0 = fR0Enabled ? "pcibridgeSetIrq" : NULL;
2441	rc = pDevIns->pDevHlpR3->pfnPCIBusRegister(pDevIns, &PciBusReg, &pBus->pPciHlpR3);
2442	if (RT_FAILURE(rc))
2443	return PDMDEV_SET_ERROR(pDevIns, rc,
2444	N_("Failed to register ourselves as a PCI Bus"));
2445	if (pBus->pPciHlpR3->u32Version != PDM_PCIHLPR3_VERSION)
2446	return PDMDevHlpVMSetError(pDevIns, VERR_VERSION_MISMATCH, RT_SRC_POS,
2447	N_("PCI helper version mismatch; got %#x expected %#x"),
2448	pBus->pPciHlpR3->u32Version, PDM_PCIHLPR3_VERSION);
2449
2450	pBus->pPciHlpRC = pBus->pPciHlpR3->pfnGetRCHelpers(pDevIns);
2451	pBus->pPciHlpR0 = pBus->pPciHlpR3->pfnGetR0Helpers(pDevIns);
2452
2453	/*
2454	* Fill in PCI configs and add them to the bus.
2455	*/
2456	PCIDevSetVendorId( &pBus->PciDev, 0x8086); /* Intel */
2457	PCIDevSetDeviceId( &pBus->PciDev, 0x2448); /* 82801 Mobile PCI bridge. */
2458	PCIDevSetRevisionId(&pBus->PciDev, 0xf2);
2459	PCIDevSetClassSub( &pBus->PciDev, 0x04); /* pci2pci */
2460	PCIDevSetClassBase( &pBus->PciDev, 0x06); /* PCI_bridge */
2461	PCIDevSetClassProg( &pBus->PciDev, 0x01); /* Supports subtractive decoding. */
2462	PCIDevSetHeaderType(&pBus->PciDev, 0x01); /* Single function device which adheres to the PCI-to-PCI bridge spec. */
2463	PCIDevSetCommand( &pBus->PciDev, 0x00);
2464	PCIDevSetStatus( &pBus->PciDev, 0x20); /* 66MHz Capable. */
2465	PCIDevSetInterruptLine(&pBus->PciDev, 0x00); /* This device does not assert interrupts. */
2466
2467	/*
2468	* This device does not generate interrupts. Interrupt delivery from
2469	* devices attached to the bus is unaffected.
2470	*/
2471	PCIDevSetInterruptPin (&pBus->PciDev, 0x00);
2472
2473	pBus->PciDev.pDevIns = pDevIns;
2474	pBus->PciDev.Int.s.fPciToPciBridge = true;
2475	pBus->PciDev.Int.s.pfnBridgeConfigRead = pcibridgeConfigRead;
2476	pBus->PciDev.Int.s.pfnBridgeConfigWrite = pcibridgeConfigWrite;
2477
2478	/*
2479	* Register this PCI bridge. The called function will take care on which bus we will get registered.
2480	*/
2481	rc = PDMDevHlpPCIRegister (pDevIns, &pBus->PciDev);
2482	if (RT_FAILURE(rc))
2483	return rc;
2484
2485	pBus->iDevSearch = 0;
2486	/*
2487	* The iBus property doesn't really represent the bus number
2488	* because the guest and the BIOS can choose different bus numbers
2489	* for them.
2490	* The bus number is mainly for the setIrq function to indicate
2491	* when the host bus is reached which will have iBus = 0.
2492	* Thathswhy the + 1.
2493	*/
2494	pBus->iBus = iInstance + 1;
2495
2496	/*
2497	* Register SSM handlers. We use the same saved state version as for the host bridge
2498	* to make changes easier.
2499	*/
2500	rc = PDMDevHlpSSMRegisterEx(pDevIns, VBOX_PCI_SAVED_STATE_VERSION, sizeof(pBus) + 16128, "pgm",
2501	NULL, NULL, NULL,
2502	NULL, pcibridgeR3SaveExec, NULL,
2503	NULL, pcibridgeR3LoadExec, NULL);
2504	if (RT_FAILURE(rc))
2505	return rc;
2506
2507	return VINF_SUCCESS;
2508	}
2509
2510	/**
2511	* The device registration structure
2512	* for the PCI-to-PCI bridge.
2513	*/
2514	const PDMDEVREG g_DevicePCIBridge =
2515	{
2516	/* u32Version */
2517	PDM_DEVREG_VERSION,
2518	/* szDeviceName */
2519	"pcibridge",
2520	/* szRCMod */
2521	"VBoxDDGC.gc",
2522	/* szR0Mod */
2523	"VBoxDDR0.r0",
2524	/* pszDescription */
2525	"82801 Mobile PCI to PCI bridge",
2526	/* fFlags */
2527	PDM_DEVREG_FLAGS_DEFAULT_BITS \| PDM_DEVREG_FLAGS_RC \| PDM_DEVREG_FLAGS_R0,
2528	/* fClass */
2529	PDM_DEVREG_CLASS_BUS_PCI,
2530	/* cMaxInstances */
2531	~0,
2532	/* cbInstance */
2533	sizeof(PCIBUS),
2534	/* pfnConstruct */
2535	pcibridgeConstruct,
2536	/* pfnDestruct */
2537	NULL,
2538	/* pfnRelocate */
2539	pcibridgeRelocate,
2540	/* pfnIOCtl */
2541	NULL,
2542	/* pfnPowerOn */
2543	NULL,
2544	/* pfnReset */
2545	pcibridgeReset,
2546	/* pfnSuspend */
2547	NULL,
2548	/* pfnResume */
2549	NULL,
2550	/* pfnAttach */
2551	NULL,
2552	/* pfnDetach */
2553	NULL,
2554	/* pfnQueryInterface */
2555	NULL,
2556	/* pfnInitComplete */
2557	NULL,
2558	/* pfnPowerOff */
2559	NULL,
2560	/* pfnSoftReset */
2561	NULL,
2562	/* u32VersionEnd */
2563	PDM_DEVREG_VERSION
2564	};
2565
2566	#endif /* IN_RING3 */
2567	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Bus/DevPCI.cpp@ 24145

Download in other formats: