Sd.h@ 81604

Last change on this file since 81604 was 80721, checked in by vboxsync, 6 years ago
Devices/EFI/FirmwareNew: Start upgrade process to edk2-stable201908 (compiles on Windows and works to some extent), bugref:4643
Property svn:eol-style set to `native`
File size: 9.2 KB

Line
1	/** @file
2	Header file for SD memory card support.
3
4	This header file contains some definitions defined in SD Physical Layer Simplified
5	Specification Version 4.10 spec.
6
7	Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
8	SPDX-License-Identifier: BSD-2-Clause-Patent
9
10	**/
11
12	#ifndef __SD_H__
13	#define __SD_H__
14
15	//
16	// SD command index
17	//
18	#define SD_GO_IDLE_STATE 0
19	#define SD_ALL_SEND_CID 2
20	#define SD_SET_RELATIVE_ADDR 3
21	#define SD_SET_DSR 4
22	#define SDIO_SEND_OP_COND 5
23	#define SD_SWITCH_FUNC 6
24	#define SD_SELECT_DESELECT_CARD 7
25	#define SD_SEND_IF_COND 8
26	#define SD_SEND_CSD 9
27	#define SD_SEND_CID 10
28	#define SD_VOLTAGE_SWITCH 11
29	#define SD_STOP_TRANSMISSION 12
30	#define SD_SEND_STATUS 13
31	#define SD_GO_INACTIVE_STATE 15
32	#define SD_SET_BLOCKLEN 16
33	#define SD_READ_SINGLE_BLOCK 17
34	#define SD_READ_MULTIPLE_BLOCK 18
35	#define SD_SEND_TUNING_BLOCK 19
36	#define SD_SPEED_CLASS_CONTROL 20
37	#define SD_SET_BLOCK_COUNT 23
38	#define SD_WRITE_SINGLE_BLOCK 24
39	#define SD_WRITE_MULTIPLE_BLOCK 25
40	#define SD_PROGRAM_CSD 27
41	#define SD_SET_WRITE_PROT 28
42	#define SD_CLR_WRITE_PROT 29
43	#define SD_SEND_WRITE_PROT 30
44	#define SD_ERASE_WR_BLK_START 32
45	#define SD_ERASE_WR_BLK_END 33
46	#define SD_ERASE 38
47	#define SD_LOCK_UNLOCK 42
48	#define SD_READ_EXTR_SINGLE 48
49	#define SD_WRITE_EXTR_SINGLE 49
50	#define SDIO_RW_DIRECT 52
51	#define SDIO_RW_EXTENDED 53
52	#define SD_APP_CMD 55
53	#define SD_GEN_CMD 56
54	#define SD_READ_EXTR_MULTI 58
55	#define SD_WRITE_EXTR_MULTI 59
56
57	#define SD_SET_BUS_WIDTH 6 // ACMD6
58	#define SD_STATUS 13 // ACMD13
59	#define SD_SEND_NUM_WR_BLOCKS 22 // ACMD22
60	#define SD_SET_WR_BLK_ERASE_COUNT 23 // ACMD23
61	#define SD_SEND_OP_COND 41 // ACMD41
62	#define SD_SET_CLR_CARD_DETECT 42 // ACMD42
63	#define SD_SEND_SCR 51 // ACMD51
64
65	#pragma pack(1)
66	typedef struct {
67	UINT8 NotUsed:1; // Not used [0:0]
68	UINT8 Crc:7; // CRC [7:1]
69	UINT16 ManufacturingDate:12; // Manufacturing date [19:8]
70	UINT16 Reserved:4; // Reserved [23:20]
71	UINT8 ProductSerialNumber[4]; // Product serial number [55:24]
72	UINT8 ProductRevision; // Product revision [63:56]
73	UINT8 ProductName[5]; // Product name [103:64]
74	UINT8 OemId[2]; // OEM/Application ID [119:104]
75	UINT8 ManufacturerId; // Manufacturer ID [127:120]
76	} SD_CID;
77
78	typedef struct {
79	UINT32 NotUsed:1; // Not used [0:0]
80	UINT32 Crc:7; // CRC [7:1]
81	UINT32 Reserved:2; // Reserved [9:8]
82	UINT32 FileFormat:2; // File format [11:10]
83	UINT32 TmpWriteProtect:1; // Temporary write protection [12:12]
84	UINT32 PermWriteProtect:1; // Permanent write protection [13:13]
85	UINT32 Copy:1; // Copy flag (OTP) [14:14]
86	UINT32 FileFormatGrp:1; // File format group [15:15]
87	UINT32 Reserved1:5; // Reserved [20:16]
88	UINT32 WriteBlPartial:1; // Partial blocks for write allowed [21:21]
89	UINT32 WriteBlLen:4; // Max. write data block length [25:22]
90	UINT32 R2WFactor:3; // Write speed factor [28:26]
91	UINT32 Reserved2:2; // Manufacturer default ECC [30:29]
92	UINT32 WpGrpEnable:1; // Write protect group enable [31:31]
93
94	UINT32 WpGrpSize:7; // Write protect group size [38:32]
95	UINT32 SectorSize:7; // Erase sector size [45:39]
96	UINT32 EraseBlkEn:1; // Erase single block enable [46:46]
97	UINT32 CSizeMul:3; // device size multiplier [49:47]
98	UINT32 VddWCurrMax:3; // max. write current @VDD max [52:50]
99	UINT32 VddWCurrMin:3; // max. write current @VDD min [55:53]
100	UINT32 VddRCurrMax:3; // max. read current @VDD max [58:56]
101	UINT32 VddRCurrMin:3; // max. read current @VDD min [61:59]
102	UINT32 CSizeLow:2; // Device size low 2 bits [63:62]
103
104	UINT32 CSizeHigh:10; // Device size high 10 bits [73:64]
105	UINT32 Reserved4:2; // Reserved [75:74]
106	UINT32 DsrImp:1; // DSR implemented [76:76]
107	UINT32 ReadBlkMisalign:1; // Read block misalignment [77:77]
108	UINT32 WriteBlkMisalign:1; // Write block misalignment [78:78]
109	UINT32 ReadBlPartial:1; // Partial blocks for read allowed [79:79]
110	UINT32 ReadBlLen:4; // Max. read data block length [83:80]
111	UINT32 Ccc:12; // Card command classes [95:84]
112
113	UINT32 TranSpeed:8; // Max. data transfer rate [103:96]
114	UINT32 Nsac:8; // Data read access-time in CLK cycles (NSAC*100) [111:104]
115	UINT32 Taac:8; // Data read access-time [119:112]
116	UINT32 Reserved5:6; // Reserved [125:120]
117	UINT32 CsdStructure:2; // CSD structure [127:126]
118	} SD_CSD;
119
120	typedef struct {
121	UINT32 NotUsed:1; // Not used [0:0]
122	UINT32 Crc:7; // CRC [7:1]
123	UINT32 Reserved:2; // Reserved [9:8]
124	UINT32 FileFormat:2; // File format [11:10]
125	UINT32 TmpWriteProtect:1; // Temporary write protection [12:12]
126	UINT32 PermWriteProtect:1; // Permanent write protection [13:13]
127	UINT32 Copy:1; // Copy flag (OTP) [14:14]
128	UINT32 FileFormatGrp:1; // File format group [15:15]
129	UINT32 Reserved1:5; // Reserved [20:16]
130	UINT32 WriteBlPartial:1; // Partial blocks for write allowed [21:21]
131	UINT32 WriteBlLen:4; // Max. write data block length [25:22]
132	UINT32 R2WFactor:3; // Write speed factor [28:26]
133	UINT32 Reserved2:2; // Manufacturer default ECC [30:29]
134	UINT32 WpGrpEnable:1; // Write protect group enable [31:31]
135
136	UINT32 WpGrpSize:7; // Write protect group size [38:32]
137	UINT32 SectorSize:7; // Erase sector size [45:39]
138	UINT32 EraseBlkEn:1; // Erase single block enable [46:46]
139	UINT32 Reserved3:1; // Reserved [47:47]
140	UINT32 CSizeLow:16; // Device size low 16 bits [63:48]
141
142	UINT32 CSizeHigh:6; // Device size high 6 bits [69:64]
143	UINT32 Reserved4:6; // Reserved [75:70]
144	UINT32 DsrImp:1; // DSR implemented [76:76]
145	UINT32 ReadBlkMisalign:1; // Read block misalignment [77:77]
146	UINT32 WriteBlkMisalign:1; // Write block misalignment [78:78]
147	UINT32 ReadBlPartial:1; // Partial blocks for read allowed [79:79]
148	UINT32 ReadBlLen:4; // Max. read data block length [83:80]
149	UINT32 Ccc:12; // Card command classes [95:84]
150
151	UINT32 TranSpeed:8; // Max. data transfer rate [103:96]
152	UINT32 Nsac:8; // Data read access-time in CLK cycles (NSAC*100) [111:104]
153	UINT32 Taac:8; // Data read access-time [119:112]
154	UINT32 Reserved5:6; // Reserved [125:120]
155	UINT32 CsdStructure:2; // CSD structure [127:126]
156	} SD_CSD2;
157
158	typedef struct {
159	UINT32 Reserved; // Reserved [31:0]
160
161	UINT32 CmdSupport:4; // Command Support bits [35:32]
162	UINT32 Reserved1:6; // Reserved [41:36]
163	UINT32 SdSpec4:1; // Spec. Version 4.00 or higher [42:42]
164	UINT32 ExSecurity:4; // Extended Security Support [46:43]
165	UINT32 SdSpec3:1; // Spec. Version 3.00 or higher [47:47]
166	UINT32 SdBusWidths:4; // DAT Bus widths supported [51:48]
167	UINT32 SdSecurity:3; // CPRM security support [54:52]
168	UINT32 DataStatAfterErase:1; // Data status after erases [55]
169	UINT32 SdSpec:4; // SD Memory Card Spec. Version [59:56]
170	UINT32 ScrStructure:4; // SCR Structure [63:60]
171	} SD_SCR;
172
173	#pragma pack()
174
175	#endif

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/EFI/Firmware/MdePkg/Include/IndustryStandard/Sd.h@ 81604

Download in other formats: