source: vbox/trunk/src/VBox/Devices/EFI/Firmware2/VBoxPkg/VBoxIdeBusDxe/DriverDiagnostics.c@ 33024

/** @file
  Implementation of UEFI driver Dialnostics protocol which to perform diagnostic on the IDE
  Bus controller.
  
  Copyright (c) 2006 - 2008, Intel Corporation                                                         
  All rights reserved. This program and the accompanying materials                          
  are licensed and made available under the terms and conditions of the BSD License         
  which accompanies this distribution.  The full text of the license may be found at        
  http://opensource.org/licenses/bsd-license.php                                            

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.             

**/


#include "IdeBus.h"

#define IDE_BUS_DIAGNOSTIC_ERROR  L"PCI IDE/ATAPI Driver Diagnostics Failed"

//
// EFI Driver Diagnostics Protocol
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_DRIVER_DIAGNOSTICS_PROTOCOL gIDEBusDriverDiagnostics = {
  IDEBusDriverDiagnosticsRunDiagnostics,
  "eng"
};

//
// EFI Driver Diagnostics 2 Protocol
//
GLOBAL_REMOVE_IF_UNREFERENCED EFI_DRIVER_DIAGNOSTICS2_PROTOCOL gIDEBusDriverDiagnostics2 = {
  (EFI_DRIVER_DIAGNOSTICS2_RUN_DIAGNOSTICS) IDEBusDriverDiagnosticsRunDiagnostics,
  "en"
};

/**
  Runs diagnostics on a controller.

  @param  This             A pointer to the EFI_DRIVER_DIAGNOSTICS_PROTOCOLinstance.
  @param  ControllerHandle The handle of the controller to run diagnostics on.
  @param  ChildHandle      The handle of the child controller to run diagnostics on
                           This is an optional parameter that may be NULL.  It will
                           be NULL for device drivers.  It will also be NULL for a
                           bus drivers that wish to run diagnostics on the bus controller. 
                           It will not be NULL for a bus driver that wishes to run 
                           diagnostics on one of its child controllers.
  @param  DiagnosticType   Indicates type of diagnostics to perform on the controller
                           specified by ControllerHandle and ChildHandle.
  @param  Language         A pointer to a three character ISO 639-2 language identifier. 
                           This is the language in which the optional error message should 
                           be returned in Buffer, and it must match one of the languages 
                           specified in SupportedLanguages. The number of languages supported by
                           a driver is up to the driver writer.
  @param  ErrorType        A GUID that defines the format of the data returned in Buffer.
  @param  BufferSize       The size, in bytes, of the data returned in Buffer.
  @param  Buffer           A buffer that contains a Null-terminated Unicode string
                           plus some additional data whose format is defined by ErrorType.  
                           Buffer is allocated by this function with AllocatePool(), and 
                           it is the caller's responsibility to free it with a call to FreePool().

  @retval  EFI_SUCCESS           The controller specified by ControllerHandle and ChildHandle passed 
                                 the diagnostic.
  @retval  EFI_INVALID_PARAMETER ControllerHandle is not a valid EFI_HANDLE.
  @retval  EFI_INVALID_PARAMETER ChildHandle is not NULL and it is not a valid EFI_HANDLE.
  @retval  EFI_INVALID_PARAMETER Language is NULL.
  @retval  EFI_INVALID_PARAMETER ErrorType is NULL.
  @retval  EFI_INVALID_PARAMETER BufferType is NULL.
  @retval  EFI_INVALID_PARAMETER Buffer is NULL.
  @retval  EFI_UNSUPPORTED       The driver specified by This does not support running 
                                 diagnostics for the controller specified by ControllerHandle 
                                 and ChildHandle.
  @retval  EFI_UNSUPPORTED       The driver specified by This does not support the
                                 type of diagnostic specified by DiagnosticType.
  @retval  EFI_UNSUPPORTED       The driver specified by This does not support the language 
                                 specified by Language.
  @retval  EFI_OUT_OF_RESOURCES  There are not enough resources available to complete the 
                                 diagnostics.
  @retval  EFI_OUT_OF_RESOURCES  There are not enough resources available to return the 
                                 status information in ErrorType, BufferSize,and Buffer.
  @retval  EFI_DEVICE_ERROR      The controller specified by ControllerHandle and ChildHandle 
                                 did not pass the diagnostic.
**/
EFI_STATUS
EFIAPI
IDEBusDriverDiagnosticsRunDiagnostics (
  IN  EFI_DRIVER_DIAGNOSTICS_PROTOCOL               *This,
  IN  EFI_HANDLE                                    ControllerHandle,
  IN  EFI_HANDLE                                    ChildHandle  OPTIONAL,
  IN  EFI_DRIVER_DIAGNOSTIC_TYPE                    DiagnosticType,
  IN  CHAR8                                         *Language,
  OUT EFI_GUID                                      **ErrorType,
  OUT UINTN                                         *BufferSize,
  OUT CHAR16                                        **Buffer
  )
{
  EFI_STATUS            Status;
  EFI_PCI_IO_PROTOCOL   *PciIo;
  EFI_BLOCK_IO_PROTOCOL *BlkIo;
  IDE_BLK_IO_DEV        *IdeBlkIoDevice;
  UINT32                VendorDeviceId;
  VOID                  *BlockBuffer;
  CHAR8                 *SupportedLanguages;
  BOOLEAN               Iso639Language;
  BOOLEAN               Found;
  UINTN                 Index;

  if (Language         == NULL ||
      ErrorType        == NULL ||
      Buffer           == NULL ||
      ControllerHandle == NULL ||
      BufferSize       == NULL) {

    return EFI_INVALID_PARAMETER;
  }

  SupportedLanguages = This->SupportedLanguages;
  Iso639Language = (BOOLEAN)(This == &gIDEBusDriverDiagnostics);
  //
  // Make sure Language is in the set of Supported Languages
  //
  Found = FALSE;
  while (*SupportedLanguages != 0) {
    if (Iso639Language) {
      if (CompareMem (Language, SupportedLanguages, 3) == 0) {
        Found = TRUE;
        break;
      }
      SupportedLanguages += 3;
    } else {
      for (Index = 0; SupportedLanguages[Index] != 0 && SupportedLanguages[Index] != ';'; Index++);
      if ((AsciiStrnCmp(SupportedLanguages, Language, Index) == 0) && (Language[Index] == 0)) {
        Found = TRUE;
        break;
      }
      SupportedLanguages += Index;
      for (; *SupportedLanguages != 0 && *SupportedLanguages == ';'; SupportedLanguages++);
    }
  }
  //
  // If Language is not a member of SupportedLanguages, then return EFI_UNSUPPORTED
  //
  if (!Found) {
    return EFI_UNSUPPORTED;
  }

  *ErrorType  = NULL;
  *BufferSize = 0;

  if (ChildHandle == NULL) {
    Status = gBS->OpenProtocol (
                    ControllerHandle,
                    &gEfiCallerIdGuid,
                    NULL,
                    gIDEBusDriverBinding.DriverBindingHandle,
                    ControllerHandle,
                    EFI_OPEN_PROTOCOL_TEST_PROTOCOL
                    );
    if (EFI_ERROR (Status)) {
      return Status;
    }

    Status = gBS->OpenProtocol (
                    ControllerHandle,
                    &gEfiPciIoProtocolGuid,
                    (VOID **) &PciIo,
                    gIDEBusDriverBinding.DriverBindingHandle,
                    ControllerHandle,
                    EFI_OPEN_PROTOCOL_GET_PROTOCOL
                    );
    if (EFI_ERROR (Status)) {
      return EFI_DEVICE_ERROR;
    }

    //
    // Use services of PCI I/O Protocol to test the PCI IDE/ATAPI Controller
    // The following test simply reads the Device ID and Vendor ID.
    // It should never fail.  A real test would perform more advanced
    // diagnostics.
    //

    Status = PciIo->Pci.Read (PciIo, EfiPciIoWidthUint32, 0, 1, &VendorDeviceId);
    if (EFI_ERROR (Status) || VendorDeviceId == 0xffffffff) {
      return EFI_DEVICE_ERROR;
    }

    return EFI_SUCCESS;
  }

  Status = gBS->OpenProtocol (
                  ChildHandle,
                  &gEfiBlockIoProtocolGuid,
                  (VOID **) &BlkIo,
                  gIDEBusDriverBinding.DriverBindingHandle,
                  ChildHandle,
                  EFI_OPEN_PROTOCOL_GET_PROTOCOL
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  IdeBlkIoDevice = IDE_BLOCK_IO_DEV_FROM_THIS (BlkIo);

  //
  // Use services available from IdeBlkIoDevice to test the IDE/ATAPI device
  //
  Status = gBS->AllocatePool (
                  EfiBootServicesData,
                  IdeBlkIoDevice->BlkMedia.BlockSize,
                  (VOID **) &BlockBuffer
                  );
  if (EFI_ERROR (Status)) {
    return Status;
  }

  Status = IdeBlkIoDevice->BlkIo.ReadBlocks (
                                  &IdeBlkIoDevice->BlkIo,
                                  IdeBlkIoDevice->BlkMedia.MediaId,
                                  0,
                                  IdeBlkIoDevice->BlkMedia.BlockSize,
                                  BlockBuffer
                                  );

  if (EFI_ERROR (Status)) {
    *ErrorType  = &gEfiCallerIdGuid;
    *BufferSize = sizeof (IDE_BUS_DIAGNOSTIC_ERROR);

    Status = gBS->AllocatePool (
                    EfiBootServicesData,
                    (UINTN) (*BufferSize),
                    (VOID **) Buffer
                    );
    if (EFI_ERROR (Status)) {
      return Status;
    }

    CopyMem (*Buffer, IDE_BUS_DIAGNOSTIC_ERROR, *BufferSize);

    Status = EFI_DEVICE_ERROR;
  }

  gBS->FreePool (BlockBuffer);

  return Status;
}