PS2M.cpp@ 76263

Last change on this file since 76263 was 69500, checked in by vboxsync, 7 years ago
*: scm --update-copyright-year
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 46.2 KB

Line
1	/* $Id: PS2M.cpp 69500 2017-10-28 15:14:05Z vboxsync $ */
2	/** @file
3	* PS2M - PS/2 auxiliary device (mouse) emulation.
4	*/
5
6	/*
7	* Copyright (C) 2007-2017 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18	/*
19	* References:
20	*
21	* The Undocumented PC (2nd Ed.), Frank van Gilluwe, Addison-Wesley, 1996.
22	* IBM TrackPoint System Version 4.0 Engineering Specification, 1999.
23	* ELAN Microelectronics eKM8025 USB & PS/2 Mouse Controller, 2006.
24	*
25	*
26	* Notes:
27	*
28	* - The auxiliary device commands are very similar to keyboard commands.
29	* Most keyboard commands which do not specifically deal with the keyboard
30	* (enable, disable, reset) have identical counterparts.
31	* - The code refers to 'auxiliary device' and 'mouse'; these terms are not
32	* quite interchangeable. 'Auxiliary device' is used when referring to the
33	* generic PS/2 auxiliary device interface and 'mouse' when referring to
34	* a mouse attached to the auxiliary port.
35	* - The basic modes of operation are reset, stream, and remote. Those are
36	* mutually exclusive. Stream and remote modes can additionally have wrap
37	* mode enabled.
38	* - The auxiliary device sends unsolicited data to the host only when it is
39	* both in stream mode and enabled. Otherwise it only responds to commands.
40	*
41	*
42	* There are three report packet formats supported by the emulated device. The
43	* standard three-byte PS/2 format (with middle button support), IntelliMouse
44	* four-byte format with added scroll wheel, and IntelliMouse Explorer four-byte
45	* format with reduced scroll wheel range but two additional buttons. Note that
46	* the first three bytes of the report are always the same.
47	*
48	* Upon reset, the mouse is always in the standard PS/2 mode. A special 'knock'
49	* sequence can be used to switch to ImPS/2 or ImEx mode. Three consecutive
50	* Set Sampling Rate (0F3h) commands with arguments 200, 100, 80 switch to ImPS/2
51	* mode. While in ImPS/2 or PS/2 mode, three consecutive Set Sampling Rate
52	* commands with arguments 200, 200, 80 switch to ImEx mode. The Read ID (0F2h)
53	* command will report the currently selected protocol.
54	*
55	*
56	* Standard PS/2 pointing device three-byte report packet format:
57	*
58	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
59	* \|Bit/byte\| bit 7 \| bit 6 \| bit 5 \| bit 4 \| bit 3 \| bit 2 \| bit 1 \| bit 0 \|
60	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
61	* \| Byte 1 \| Y ovfl \| X ovfl \| Y sign \| X sign \| Sync \| M btn \| R btn \| L btn \|
62	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
63	* \| Byte 2 \| X movement delta (two's complement) \|
64	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
65	* \| Byte 3 \| Y movement delta (two's complement) \|
66	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
67	*
68	* - The sync bit is always set. It allows software to synchronize data packets
69	* as the X/Y position data typically does not have bit 4 set.
70	* - The overflow bits are set if motion exceeds accumulator range. We use the
71	* maximum range (effectively 9 bits) and do not set the overflow bits.
72	* - Movement in the up/right direction is defined as having positive sign.
73	*
74	*
75	* IntelliMouse PS/2 (ImPS/2) fourth report packet byte:
76	*
77	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
78	* \|Bit/byte\| bit 7 \| bit 6 \| bit 5 \| bit 4 \| bit 3 \| bit 2 \| bit 1 \| bit 0 \|
79	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
80	* \| Byte 4 \| Z movement delta (two's complement) \|
81	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
82	*
83	* - The valid range for Z delta values is only -8/+7, i.e. 4 bits.
84	*
85	* IntelliMouse Explorer (ImEx) fourth report packet byte:
86	*
87	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
88	* \|Bit/byte\| bit 7 \| bit 6 \| bit 5 \| bit 4 \| bit 3 \| bit 2 \| bit 1 \| bit 0 \|
89	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
90	* \| Byte 4 \| 0 \| 0 \| Btn 5 \| Btn 4 \| Z mov't delta (two's complement) \|
91	* +--------+--------+--------+--------+--------+--------+--------+--------+--------+
92	*
93	*/
94
95
96	/*********************************************************************************************************************************
97	* Header Files *
98	*********************************************************************************************************************************/
99	#define LOG_GROUP LOG_GROUP_DEV_KBD
100	#include <VBox/vmm/pdmdev.h>
101	#include <VBox/err.h>
102	#include <iprt/assert.h>
103	#include <iprt/uuid.h>
104	#include "VBoxDD.h"
105	#define IN_PS2M
106	#include "PS2Dev.h"
107
108
109	/*********************************************************************************************************************************
110	* Defined Constants And Macros *
111	*********************************************************************************************************************************/
112	/** @name Auxiliary device commands sent by the system.
113	* @{ */
114	#define ACMD_SET_SCALE_11 0xE6 /* Set 1:1 scaling. */
115	#define ACMD_SET_SCALE_21 0xE7 /* Set 2:1 scaling. */
116	#define ACMD_SET_RES 0xE8 /* Set resolution. */
117	#define ACMD_REQ_STATUS 0xE9 /* Get device status. */
118	#define ACMD_SET_STREAM 0xEA /* Set stream mode. */
119	#define ACMD_READ_REMOTE 0xEB /* Read remote data. */
120	#define ACMD_RESET_WRAP 0xEC /* Exit wrap mode. */
121	#define ACMD_INVALID_1 0xED
122	#define ACMD_SET_WRAP 0xEE /* Set wrap (echo) mode. */
123	#define ACMD_INVALID_2 0xEF
124	#define ACMD_SET_REMOTE 0xF0 /* Set remote mode. */
125	#define ACMD_INVALID_3 0xF1
126	#define ACMD_READ_ID 0xF2 /* Read device ID. */
127	#define ACMD_SET_SAMP_RATE 0xF3 /* Set sampling rate. */
128	#define ACMD_ENABLE 0xF4 /* Enable (streaming mode). */
129	#define ACMD_DISABLE 0xF5 /* Disable (streaming mode). */
130	#define ACMD_SET_DEFAULT 0xF6 /* Set defaults. */
131	#define ACMD_INVALID_4 0xF7
132	#define ACMD_INVALID_5 0xF8
133	#define ACMD_INVALID_6 0xF9
134	#define ACMD_INVALID_7 0xFA
135	#define ACMD_INVALID_8 0xFB
136	#define ACMD_INVALID_9 0xFC
137	#define ACMD_INVALID_10 0xFD
138	#define ACMD_RESEND 0xFE /* Resend response. */
139	#define ACMD_RESET 0xFF /* Reset device. */
140	/** @} */
141
142	/** @name Auxiliary device responses sent to the system.
143	* @{ */
144	#define ARSP_ID 0x00
145	#define ARSP_BAT_OK 0xAA /* Self-test passed. */
146	#define ARSP_ACK 0xFA /* Command acknowledged. */
147	#define ARSP_ERROR 0xFC /* Bad command. */
148	#define ARSP_RESEND 0xFE /* Requesting resend. */
149	/** @} */
150
151	/** Define a simple PS/2 input device queue. */
152	#define DEF_PS2Q_TYPE(name, size) \
153	typedef struct { \
154	uint32_t rpos; \
155	uint32_t wpos; \
156	uint32_t cUsed; \
157	uint32_t cSize; \
158	uint8_t abQueue[size]; \
159	} name
160
161	/* Internal mouse queue sizes. The input queue is relatively large,
162	* but the command queue only needs to handle a few bytes.
163	*/
164	#define AUX_EVT_QUEUE_SIZE 256
165	#define AUX_CMD_QUEUE_SIZE 8
166
167
168	/*********************************************************************************************************************************
169	* Structures and Typedefs *
170	*********************************************************************************************************************************/
171
172	DEF_PS2Q_TYPE(AuxEvtQ, AUX_EVT_QUEUE_SIZE);
173	DEF_PS2Q_TYPE(AuxCmdQ, AUX_CMD_QUEUE_SIZE);
174	#ifndef VBOX_DEVICE_STRUCT_TESTCASE /// @todo hack
175	DEF_PS2Q_TYPE(GeneriQ, 1);
176	#endif
177
178	/* Auxiliary device special modes of operation. */
179	typedef enum {
180	AUX_MODE_STD, /* Standard operation. */
181	AUX_MODE_RESET, /* Currently in reset. */
182	AUX_MODE_WRAP /* Wrap mode (echoing input). */
183	} PS2M_MODE;
184
185	/* Auxiliary device operational state. */
186	typedef enum {
187	AUX_STATE_RATE_ERR = RT_BIT(0), /* Invalid rate received. */
188	AUX_STATE_RES_ERR = RT_BIT(1), /* Invalid resolution received. */
189	AUX_STATE_SCALING = RT_BIT(4), /* 2:1 scaling in effect. */
190	AUX_STATE_ENABLED = RT_BIT(5), /* Reporting enabled in stream mode. */
191	AUX_STATE_REMOTE = RT_BIT(6) /* Remote mode (reports on request). */
192	} PS2M_STATE;
193
194	/* Externally visible state bits. */
195	#define AUX_STATE_EXTERNAL (AUX_STATE_SCALING \| AUX_STATE_ENABLED \| AUX_STATE_REMOTE)
196
197	/* Protocols supported by the PS/2 mouse. */
198	typedef enum {
199	PS2M_PROTO_PS2STD = 0, /* Standard PS/2 mouse protocol. */
200	PS2M_PROTO_IMPS2 = 3, /* IntelliMouse PS/2 protocol. */
201	PS2M_PROTO_IMEX = 4 /* IntelliMouse Explorer protocol. */
202	} PS2M_PROTO;
203
204	/* Protocol selection 'knock' states. */
205	typedef enum {
206	PS2M_KNOCK_INITIAL,
207	PS2M_KNOCK_1ST,
208	PS2M_KNOCK_IMPS2_2ND,
209	PS2M_KNOCK_IMEX_2ND
210	} PS2M_KNOCK_STATE;
211
212	/**
213	* The PS/2 auxiliary device instance data.
214	*/
215	typedef struct PS2M
216	{
217	/** Pointer to parent device (keyboard controller). */
218	R3PTRTYPE(void *) pParent;
219	/** Operational state. */
220	uint8_t u8State;
221	/** Configured sampling rate. */
222	uint8_t u8SampleRate;
223	/** Configured resolution. */
224	uint8_t u8Resolution;
225	/** Currently processed command (if any). */
226	uint8_t u8CurrCmd;
227	/** Set if the throttle delay is active. */
228	bool fThrottleActive;
229	/** Set if the throttle delay is active. */
230	bool fDelayReset;
231	/** Operational mode. */
232	PS2M_MODE enmMode;
233	/** Currently used protocol. */
234	PS2M_PROTO enmProtocol;
235	/** Currently used protocol. */
236	PS2M_KNOCK_STATE enmKnockState;
237	/** Buffer holding mouse events to be sent to the host. */
238	AuxEvtQ evtQ;
239	/** Command response queue (priority). */
240	AuxCmdQ cmdQ;
241	/** Accumulated horizontal movement. */
242	int32_t iAccumX;
243	/** Accumulated vertical movement. */
244	int32_t iAccumY;
245	/** Accumulated Z axis movement. */
246	int32_t iAccumZ;
247	/** Accumulated button presses. */
248	uint32_t fAccumB;
249	/** Instantaneous button data. */
250	uint32_t fCurrB;
251	/** Button state last sent to the guest. */
252	uint32_t fReportedB;
253	/** Throttling delay in milliseconds. */
254	uint32_t uThrottleDelay;
255
256	/** The device critical section protecting everything - R3 Ptr */
257	R3PTRTYPE(PPDMCRITSECT) pCritSectR3;
258	/** Command delay timer - R3 Ptr. */
259	PTMTIMERR3 pDelayTimerR3;
260	/** Interrupt throttling timer - R3 Ptr. */
261	PTMTIMERR3 pThrottleTimerR3;
262	RTR3PTR Alignment1;
263
264	/** Command delay timer - RC Ptr. */
265	PTMTIMERRC pDelayTimerRC;
266	/** Interrupt throttling timer - RC Ptr. */
267	PTMTIMERRC pThrottleTimerRC;
268
269	/** Command delay timer - R0 Ptr. */
270	PTMTIMERR0 pDelayTimerR0;
271	/** Interrupt throttling timer - R0 Ptr. */
272	PTMTIMERR0 pThrottleTimerR0;
273
274	/**
275	* Mouse port - LUN#1.
276	*
277	* @implements PDMIBASE
278	* @implements PDMIMOUSEPORT
279	*/
280	struct
281	{
282	/** The base interface for the mouse port. */
283	PDMIBASE IBase;
284	/** The keyboard port base interface. */
285	PDMIMOUSEPORT IPort;
286
287	/** The base interface of the attached mouse driver. */
288	R3PTRTYPE(PPDMIBASE) pDrvBase;
289	/** The keyboard interface of the attached mouse driver. */
290	R3PTRTYPE(PPDMIMOUSECONNECTOR) pDrv;
291	} Mouse;
292	} PS2M, *PPS2M;
293
294	AssertCompile(PS2M_STRUCT_FILLER >= sizeof(PS2M));
295
296	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
297
298
299	/*********************************************************************************************************************************
300	* Test code function declarations *
301	*********************************************************************************************************************************/
302	#if defined(RT_STRICT) && defined(IN_RING3)
303	static void ps2mTestAccumulation(void);
304	#endif
305
306
307	/*********************************************************************************************************************************
308	* Global Variables *
309	*********************************************************************************************************************************/
310
311
312	/*********************************************************************************************************************************
313	* Internal Functions *
314	*********************************************************************************************************************************/
315
316
317	/**
318	* Clear a queue.
319	*
320	* @param pQ Pointer to the queue.
321	*/
322	static void ps2kClearQueue(GeneriQ *pQ)
323	{
324	LogFlowFunc(("Clearing queue %p\n", pQ));
325	pQ->wpos = pQ->rpos;
326	pQ->cUsed = 0;
327	}
328
329
330	/**
331	* Add a byte to a queue.
332	*
333	* @param pQ Pointer to the queue.
334	* @param val The byte to store.
335	*/
336	static void ps2kInsertQueue(GeneriQ *pQ, uint8_t val)
337	{
338	/* Check if queue is full. */
339	if (pQ->cUsed >= pQ->cSize)
340	{
341	LogRelFlowFunc(("queue %p full (%d entries)\n", pQ, pQ->cUsed));
342	return;
343	}
344	/* Insert data and update circular buffer write position. */
345	pQ->abQueue[pQ->wpos] = val;
346	if (++pQ->wpos == pQ->cSize)
347	pQ->wpos = 0; /* Roll over. */
348	++pQ->cUsed;
349	LogRelFlowFunc(("inserted 0x%02X into queue %p\n", val, pQ));
350	}
351
352	#ifdef IN_RING3
353
354	/**
355	* Save a queue state.
356	*
357	* @param pSSM SSM handle to write the state to.
358	* @param pQ Pointer to the queue.
359	*/
360	static void ps2kSaveQueue(PSSMHANDLE pSSM, GeneriQ *pQ)
361	{
362	uint32_t cItems = pQ->cUsed;
363	int i;
364
365	/* Only save the number of items. Note that the read/write
366	* positions aren't saved as they will be rebuilt on load.
367	*/
368	SSMR3PutU32(pSSM, cItems);
369
370	LogFlow(("Storing %d items from queue %p\n", cItems, pQ));
371
372	/* Save queue data - only the bytes actually used (typically zero). */
373	for (i = pQ->rpos; cItems-- > 0; i = (i + 1) % pQ->cSize)
374	SSMR3PutU8(pSSM, pQ->abQueue[i]);
375	}
376
377	/**
378	* Load a queue state.
379	*
380	* @param pSSM SSM handle to read the state from.
381	* @param pQ Pointer to the queue.
382	*
383	* @return int VBox status/error code.
384	*/
385	static int ps2kLoadQueue(PSSMHANDLE pSSM, GeneriQ *pQ)
386	{
387	int rc;
388
389	/* On load, always put the read pointer at zero. */
390	SSMR3GetU32(pSSM, &pQ->cUsed);
391
392	LogFlow(("Loading %d items to queue %p\n", pQ->cUsed, pQ));
393
394	if (pQ->cUsed > pQ->cSize)
395	{
396	AssertMsgFailed(("Saved size=%u, actual=%u\n", pQ->cUsed, pQ->cSize));
397	return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
398	}
399
400	/* Recalculate queue positions and load data in one go. */
401	pQ->rpos = 0;
402	pQ->wpos = pQ->cUsed;
403	rc = SSMR3GetMem(pSSM, pQ->abQueue, pQ->cUsed);
404
405	return rc;
406	}
407
408	/* Report a change in status down (or is it up?) the driver chain. */
409	static void ps2mSetDriverState(PPS2M pThis, bool fEnabled)
410	{
411	PPDMIMOUSECONNECTOR pDrv = pThis->Mouse.pDrv;
412	if (pDrv)
413	pDrv->pfnReportModes(pDrv, fEnabled, false, false);
414	}
415
416	/* Reset the pointing device. */
417	static void ps2mReset(PPS2M pThis)
418	{
419	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_BAT_OK);
420	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, 0);
421	pThis->enmMode = AUX_MODE_STD;
422	pThis->u8CurrCmd = 0;
423
424	/// @todo move to its proper home!
425	ps2mSetDriverState(pThis, true);
426	}
427
428	#endif /* IN_RING3 */
429
430	/**
431	* Retrieve a byte from a queue.
432	*
433	* @param pQ Pointer to the queue.
434	* @param pVal Pointer to storage for the byte.
435	*
436	* @return int VINF_TRY_AGAIN if queue is empty,
437	* VINF_SUCCESS if a byte was read.
438	*/
439	static int ps2kRemoveQueue(GeneriQ pQ, uint8_t pVal)
440	{
441	int rc = VINF_TRY_AGAIN;
442
443	Assert(pVal);
444	if (pQ->cUsed)
445	{
446	*pVal = pQ->abQueue[pQ->rpos];
447	if (++pQ->rpos == pQ->cSize)
448	pQ->rpos = 0; /* Roll over. */
449	--pQ->cUsed;
450	rc = VINF_SUCCESS;
451	LogFlowFunc(("removed 0x%02X from queue %p\n", *pVal, pQ));
452	} else
453	LogFlowFunc(("queue %p empty\n", pQ));
454	return rc;
455	}
456
457	static void ps2mSetRate(PPS2M pThis, uint8_t rate)
458	{
459	Assert(rate);
460	pThis->uThrottleDelay = rate ? 1000 / rate : 0;
461	pThis->u8SampleRate = rate;
462	LogFlowFunc(("Sampling rate %u, throttle delay %u ms\n", pThis->u8SampleRate, pThis->uThrottleDelay));
463	}
464
465	static void ps2mSetDefaults(PPS2M pThis)
466	{
467	LogFlowFunc(("Set mouse defaults\n"));
468	/* Standard protocol, reporting disabled, resolution 2, 1:1 scaling. */
469	pThis->enmProtocol = PS2M_PROTO_PS2STD;
470	pThis->u8State = 0;
471	pThis->u8Resolution = 2;
472
473	/* Sample rate 100 reports per second. */
474	ps2mSetRate(pThis, 100);
475
476	/* Event queue, eccumulators, and button status bits are cleared. */
477	ps2kClearQueue((GeneriQ *)&pThis->evtQ);
478	pThis->iAccumX = pThis->iAccumY = pThis->iAccumZ = pThis->fAccumB;
479	}
480
481	/* Handle the sampling rate 'knock' sequence which selects protocol. */
482	static void ps2mRateProtocolKnock(PPS2M pThis, uint8_t rate)
483	{
484	switch (pThis->enmKnockState)
485	{
486	case PS2M_KNOCK_INITIAL:
487	if (rate == 200)
488	pThis->enmKnockState = PS2M_KNOCK_1ST;
489	break;
490	case PS2M_KNOCK_1ST:
491	if (rate == 100)
492	pThis->enmKnockState = PS2M_KNOCK_IMPS2_2ND;
493	else if (rate == 200)
494	pThis->enmKnockState = PS2M_KNOCK_IMEX_2ND;
495	else
496	pThis->enmKnockState = PS2M_KNOCK_INITIAL;
497	break;
498	case PS2M_KNOCK_IMPS2_2ND:
499	if (rate == 80)
500	{
501	pThis->enmProtocol = PS2M_PROTO_IMPS2;
502	LogRelFlow(("PS2M: Switching mouse to ImPS/2 protocol.\n"));
503	}
504	pThis->enmKnockState = PS2M_KNOCK_INITIAL;
505	break;
506	case PS2M_KNOCK_IMEX_2ND:
507	if (rate == 80)
508	{
509	pThis->enmProtocol = PS2M_PROTO_IMEX;
510	LogRelFlow(("PS2M: Switching mouse to ImEx protocol.\n"));
511	}
512	RT_FALL_THRU();
513	default:
514	pThis->enmKnockState = PS2M_KNOCK_INITIAL;
515	}
516	}
517
518	/* Three-button event mask. */
519	#define PS2M_STD_BTN_MASK (RT_BIT(0) \| RT_BIT(1) \| RT_BIT(2))
520
521	/* Report accumulated movement and button presses, then clear the accumulators. */
522	static void ps2mReportAccumulatedEvents(PPS2M pThis, GeneriQ *pQueue, bool fAccumBtns)
523	{
524	uint32_t fBtnState = fAccumBtns ? pThis->fAccumB : pThis->fCurrB;
525	uint8_t val;
526	int dX, dY, dZ;
527
528	/* Clamp the accumulated delta values to the allowed range. */
529	dX = RT_MIN(RT_MAX(pThis->iAccumX, -255), 255);
530	dY = RT_MIN(RT_MAX(pThis->iAccumY, -255), 255);
531	dZ = RT_MIN(RT_MAX(pThis->iAccumZ, -8), 7);
532
533	/* Start with the sync bit and buttons 1-3. */
534	val = RT_BIT(3) \| (fBtnState & PS2M_STD_BTN_MASK);
535	/* Set the X/Y sign bits. */
536	if (dX < 0)
537	val \|= RT_BIT(4);
538	if (dY < 0)
539	val \|= RT_BIT(5);
540
541	/* Send the standard 3-byte packet (always the same). */
542	ps2kInsertQueue(pQueue, val);
543	ps2kInsertQueue(pQueue, dX);
544	ps2kInsertQueue(pQueue, dY);
545
546	/* Add fourth byte if extended protocol is in use. */
547	if (pThis->enmProtocol > PS2M_PROTO_PS2STD)
548	{
549	if (pThis->enmProtocol == PS2M_PROTO_IMPS2)
550	ps2kInsertQueue(pQueue, dZ);
551	else
552	{
553	Assert(pThis->enmProtocol == PS2M_PROTO_IMEX);
554	/* Z value uses 4 bits; buttons 4/5 in bits 4 and 5. */
555	val = dZ & 0x0f;
556	val \|= (fBtnState << 1) & (RT_BIT(4) \| RT_BIT(5));
557	ps2kInsertQueue(pQueue, val);
558	}
559	}
560
561	/* Clear the movement accumulators, but not necessarily button state. */
562	pThis->iAccumX = pThis->iAccumY = pThis->iAccumZ = 0;
563	/* Clear accumulated button state only when it's being used. */
564	if (fAccumBtns)
565	{
566	pThis->fReportedB = pThis->fAccumB;
567	pThis->fAccumB = 0;
568	}
569	}
570
571
572	/* Determine whether a reporting rate is one of the valid ones. */
573	bool ps2mIsRateSupported(uint8_t rate)
574	{
575	static uint8_t aValidRates[] = { 10, 20, 40, 60, 80, 100, 200 };
576	size_t i;
577	bool fValid = false;
578
579	for (i = 0; i < RT_ELEMENTS(aValidRates); ++i)
580	if (aValidRates[i] == rate)
581	{
582	fValid = true;
583	break;
584	}
585
586	return fValid;
587	}
588
589	/**
590	* Receive and process a byte sent by the keyboard controller.
591	*
592	* @param pThis The PS/2 auxiliary device instance data.
593	* @param cmd The command (or data) byte.
594	*/
595	int PS2MByteToAux(PPS2M pThis, uint8_t cmd)
596	{
597	uint8_t u8Val;
598	bool fHandled = true;
599
600	LogFlowFunc(("cmd=0x%02X, active cmd=0x%02X\n", cmd, pThis->u8CurrCmd));
601
602	if (pThis->enmMode == AUX_MODE_RESET)
603	/* In reset mode, do not respond at all. */
604	return VINF_SUCCESS;
605
606	/* If there's anything left in the command response queue, trash it. */
607	ps2kClearQueue((GeneriQ *)&pThis->cmdQ);
608
609	if (pThis->enmMode == AUX_MODE_WRAP)
610	{
611	/* In wrap mode, bounce most data right back.*/
612	if (cmd == ACMD_RESET \|\| cmd == ACMD_RESET_WRAP)
613	; /* Handle as regular commands. */
614	else
615	{
616	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, cmd);
617	return VINF_SUCCESS;
618	}
619	}
620
621	#ifndef IN_RING3
622	/* Reset, Enable, and Set Default commands must be run in R3. */
623	if (cmd == ACMD_RESET \|\| cmd == ACMD_ENABLE \|\| cmd == ACMD_SET_DEFAULT)
624	return VINF_IOM_R3_IOPORT_WRITE;
625	#endif
626
627	switch (cmd)
628	{
629	case ACMD_SET_SCALE_11:
630	pThis->u8State &= ~AUX_STATE_SCALING;
631	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
632	pThis->u8CurrCmd = 0;
633	break;
634	case ACMD_SET_SCALE_21:
635	pThis->u8State \|= AUX_STATE_SCALING;
636	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
637	pThis->u8CurrCmd = 0;
638	break;
639	case ACMD_REQ_STATUS:
640	/* Report current status, sample rate, and resolution. */
641	u8Val = (pThis->u8State & AUX_STATE_EXTERNAL) \| (pThis->fCurrB & PS2M_STD_BTN_MASK);
642	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
643	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, u8Val);
644	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, pThis->u8Resolution);
645	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, pThis->u8SampleRate);
646	pThis->u8CurrCmd = 0;
647	break;
648	case ACMD_SET_STREAM:
649	pThis->u8State &= ~AUX_STATE_REMOTE;
650	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
651	pThis->u8CurrCmd = 0;
652	break;
653	case ACMD_READ_REMOTE:
654	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
655	ps2mReportAccumulatedEvents(pThis, (GeneriQ *)&pThis->cmdQ, false);
656	pThis->u8CurrCmd = 0;
657	break;
658	case ACMD_RESET_WRAP:
659	pThis->enmMode = AUX_MODE_STD;
660	/* NB: Stream mode reporting remains disabled! */
661	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
662	pThis->u8CurrCmd = 0;
663	break;
664	case ACMD_SET_WRAP:
665	pThis->enmMode = AUX_MODE_WRAP;
666	pThis->u8State &= ~AUX_STATE_ENABLED;
667	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
668	pThis->u8CurrCmd = 0;
669	break;
670	case ACMD_SET_REMOTE:
671	pThis->u8State \|= AUX_STATE_REMOTE;
672	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
673	pThis->u8CurrCmd = 0;
674	break;
675	case ACMD_READ_ID:
676	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
677	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, pThis->enmProtocol);
678	pThis->u8CurrCmd = 0;
679	break;
680	case ACMD_ENABLE:
681	pThis->u8State \|= AUX_STATE_ENABLED;
682	#ifdef IN_RING3
683	ps2mSetDriverState(pThis, true);
684	#else
685	AssertLogRelMsgFailed(("Invalid ACMD_ENABLE outside R3!\n"));
686	#endif
687	ps2kClearQueue((GeneriQ *)&pThis->evtQ);
688	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
689	pThis->u8CurrCmd = 0;
690	break;
691	case ACMD_DISABLE:
692	pThis->u8State &= ~AUX_STATE_ENABLED;
693	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
694	pThis->u8CurrCmd = 0;
695	break;
696	case ACMD_SET_DEFAULT:
697	ps2mSetDefaults(pThis);
698	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
699	pThis->u8CurrCmd = 0;
700	break;
701	case ACMD_RESEND:
702	pThis->u8CurrCmd = 0;
703	break;
704	case ACMD_RESET:
705	ps2mSetDefaults(pThis);
706	/// @todo reset more?
707	pThis->u8CurrCmd = cmd;
708	pThis->enmMode = AUX_MODE_RESET;
709	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
710	if (pThis->fDelayReset)
711	/* Slightly delay reset completion; it might take hundreds of ms. */
712	TMTimerSetMillies(pThis->CTX_SUFF(pDelayTimer), 1);
713	else
714	#ifdef IN_RING3
715	ps2mReset(pThis);
716	#else
717	AssertLogRelMsgFailed(("Invalid ACMD_RESET outside R3!\n"));
718	#endif
719	break;
720	/* The following commands need a parameter. */
721	case ACMD_SET_RES:
722	case ACMD_SET_SAMP_RATE:
723	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
724	pThis->u8CurrCmd = cmd;
725	break;
726	default:
727	/* Sending a command instead of a parameter starts the new command. */
728	switch (pThis->u8CurrCmd)
729	{
730	case ACMD_SET_RES:
731	if (cmd < 4) /* Valid resolutions are 0-3. */
732	{
733	pThis->u8Resolution = cmd;
734	pThis->u8State &= ~AUX_STATE_RES_ERR;
735	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
736	pThis->u8CurrCmd = 0;
737	}
738	else
739	{
740	/* Bad resolution. Reply with Resend or Error. */
741	if (pThis->u8State & AUX_STATE_RES_ERR)
742	{
743	pThis->u8State &= ~AUX_STATE_RES_ERR;
744	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ERROR);
745	pThis->u8CurrCmd = 0;
746	}
747	else
748	{
749	pThis->u8State \|= AUX_STATE_RES_ERR;
750	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_RESEND);
751	/* NB: Current command remains unchanged. */
752	}
753	}
754	break;
755	case ACMD_SET_SAMP_RATE:
756	if (ps2mIsRateSupported(cmd))
757	{
758	pThis->u8State &= ~AUX_STATE_RATE_ERR;
759	ps2mSetRate(pThis, cmd);
760	ps2mRateProtocolKnock(pThis, cmd);
761	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ACK);
762	pThis->u8CurrCmd = 0;
763	}
764	else
765	{
766	/* Bad rate. Reply with Resend or Error. */
767	if (pThis->u8State & AUX_STATE_RATE_ERR)
768	{
769	pThis->u8State &= ~AUX_STATE_RATE_ERR;
770	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_ERROR);
771	pThis->u8CurrCmd = 0;
772	}
773	else
774	{
775	pThis->u8State \|= AUX_STATE_RATE_ERR;
776	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_RESEND);
777	/* NB: Current command remains unchanged. */
778	}
779	}
780	break;
781	default:
782	fHandled = false;
783	}
784	/* Fall through only to handle unrecognized commands. */
785	if (fHandled)
786	break;
787	RT_FALL_THRU();
788
789	case ACMD_INVALID_1:
790	case ACMD_INVALID_2:
791	case ACMD_INVALID_3:
792	case ACMD_INVALID_4:
793	case ACMD_INVALID_5:
794	case ACMD_INVALID_6:
795	case ACMD_INVALID_7:
796	case ACMD_INVALID_8:
797	case ACMD_INVALID_9:
798	case ACMD_INVALID_10:
799	Log(("Unsupported command 0x%02X!\n", cmd));
800	ps2kInsertQueue((GeneriQ *)&pThis->cmdQ, ARSP_RESEND);
801	pThis->u8CurrCmd = 0;
802	break;
803	}
804	LogFlowFunc(("Active cmd now 0x%02X; updating interrupts\n", pThis->u8CurrCmd));
805	return VINF_SUCCESS;
806	}
807
808	/**
809	* Send a byte (packet data or command response) to the keyboard controller.
810	*
811	* @returns VINF_SUCCESS or VINF_TRY_AGAIN.
812	* @param pThis The PS/2 auxiliary device instance data.
813	* @param pb Where to return the byte we've read.
814	* @remarks Caller must have entered the device critical section.
815	*/
816	int PS2MByteFromAux(PPS2M pThis, uint8_t *pb)
817	{
818	int rc;
819
820	AssertPtr(pb);
821
822	/* Anything in the command queue has priority over data
823	* in the event queue. Additionally, packet data are
824	* blocked if a command is currently in progress, even if
825	* the command queue is empty.
826	*/
827	/// @todo Probably should flush/not fill queue if stream mode reporting disabled?!
828	rc = ps2kRemoveQueue((GeneriQ *)&pThis->cmdQ, pb);
829	if (rc != VINF_SUCCESS && !pThis->u8CurrCmd && (pThis->u8State & AUX_STATE_ENABLED))
830	rc = ps2kRemoveQueue((GeneriQ *)&pThis->evtQ, pb);
831
832	LogFlowFunc(("mouse sends 0x%02x (%svalid data)\n", *pb, rc == VINF_SUCCESS ? "" : "not "));
833
834	return rc;
835	}
836
837	#ifdef IN_RING3
838
839	/** Is there any state change to send as events to the guest? */
840	static uint32_t ps2mHaveEvents(PPS2M pThis)
841	{
842	return pThis->iAccumX \| pThis->iAccumY \| pThis->iAccumZ
843	\| (pThis->fCurrB != pThis->fReportedB) \| (pThis->fAccumB != 0);
844	}
845
846	/* Event rate throttling timer to emulate the auxiliary device sampling rate.
847	*/
848	static DECLCALLBACK(void) ps2mThrottleTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
849	{
850	RT_NOREF2(pDevIns, pTimer);
851	PPS2M pThis = (PS2M *)pvUser;
852	uint32_t uHaveEvents;
853
854	/* Grab the lock to avoid races with PutEvent(). */
855	int rc = PDMCritSectEnter(pThis->pCritSectR3, VERR_SEM_BUSY);
856	AssertReleaseRC(rc);
857
858	/* If more movement is accumulated, report it and restart the timer. */
859	uHaveEvents = ps2mHaveEvents(pThis);
860	LogFlowFunc(("Have%s events\n", uHaveEvents ? "" : " no"));
861
862	if (uHaveEvents)
863	{
864	/* Report accumulated data, poke the KBC, and start the timer. */
865	ps2mReportAccumulatedEvents(pThis, (GeneriQ *)&pThis->evtQ, true);
866	KBCUpdateInterrupts(pThis->pParent);
867	TMTimerSetMillies(pThis->CTX_SUFF(pThrottleTimer), pThis->uThrottleDelay);
868	}
869	else
870	pThis->fThrottleActive = false;
871
872	PDMCritSectLeave(pThis->pCritSectR3);
873	}
874
875	/* The auxiliary device reset is specified to take up to about 500 milliseconds. We need
876	* to delay sending the result to the host for at least a tiny little while.
877	*/
878	static DECLCALLBACK(void) ps2mDelayTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
879	{
880	RT_NOREF2(pDevIns, pTimer);
881	PPS2M pThis = (PS2M *)pvUser;
882
883	LogFlowFunc(("Delay timer: cmd %02X\n", pThis->u8CurrCmd));
884
885	Assert(pThis->u8CurrCmd == ACMD_RESET);
886	ps2mReset(pThis);
887
888	/// @todo Might want a PS2MCompleteCommand() to push last response, clear command, and kick the KBC...
889	/* Give the KBC a kick. */
890	KBCUpdateInterrupts(pThis->pParent);
891	}
892
893
894	/**
895	* Debug device info handler. Prints basic auxiliary device state.
896	*
897	* @param pDevIns Device instance which registered the info.
898	* @param pHlp Callback functions for doing output.
899	* @param pszArgs Argument string. Optional and specific to the handler.
900	*/
901	static DECLCALLBACK(void) ps2mInfoState(PPDMDEVINS pDevIns, PCDBGFINFOHLP pHlp, const char *pszArgs)
902	{
903	static const char *pcszModes[] = { "normal", "reset", "wrap" };
904	static const char *pcszProtocols[] = { "PS/2", NULL, NULL, "ImPS/2", "ImEx" };
905	PPS2M pThis = KBDGetPS2MFromDevIns(pDevIns);
906	NOREF(pszArgs);
907
908	Assert(pThis->enmMode <= RT_ELEMENTS(pcszModes));
909	Assert(pThis->enmProtocol <= RT_ELEMENTS(pcszProtocols));
910	pHlp->pfnPrintf(pHlp, "PS/2 mouse state: %s, %s mode, reporting %s\n",
911	pcszModes[pThis->enmMode],
912	pThis->u8State & AUX_STATE_REMOTE ? "remote" : "stream",
913	pThis->u8State & AUX_STATE_ENABLED ? "enabled" : "disabled");
914	pHlp->pfnPrintf(pHlp, "Protocol: %s, scaling %u:1\n",
915	pcszProtocols[pThis->enmProtocol], pThis->u8State & AUX_STATE_SCALING ? 2 : 1);
916	pHlp->pfnPrintf(pHlp, "Active command %02X\n", pThis->u8CurrCmd);
917	pHlp->pfnPrintf(pHlp, "Sampling rate %u reports/sec, resolution %u counts/mm\n",
918	pThis->u8SampleRate, 1 << pThis->u8Resolution);
919	pHlp->pfnPrintf(pHlp, "Command queue: %d items (%d max)\n",
920	pThis->cmdQ.cUsed, pThis->cmdQ.cSize);
921	pHlp->pfnPrintf(pHlp, "Event queue : %d items (%d max)\n",
922	pThis->evtQ.cUsed, pThis->evtQ.cSize);
923	}
924
925	/* -=-=-=-=-=- Mouse: IBase -=-=-=-=-=- */
926
927	/**
928	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
929	*/
930	static DECLCALLBACK(void ) ps2mQueryInterface(PPDMIBASE pInterface, const char pszIID)
931	{
932	PPS2M pThis = RT_FROM_MEMBER(pInterface, PS2M, Mouse.IBase);
933	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Mouse.IBase);
934	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUSEPORT, &pThis->Mouse.IPort);
935	return NULL;
936	}
937
938
939	/* -=-=-=-=-=- Mouse: IMousePort -=-=-=-=-=- */
940
941	/**
942	* Mouse event handler.
943	*
944	* @returns VBox status code.
945	* @param pThis The PS/2 auxiliary device instance data.
946	* @param dx X direction movement delta.
947	* @param dy Y direction movement delta.
948	* @param dz Z (vertical scroll) movement delta.
949	* @param dw W (horizontal scroll) movement delta.
950	* @param fButtons Depressed button mask.
951	*/
952	static int ps2mPutEventWorker(PPS2M pThis, int32_t dx, int32_t dy,
953	int32_t dz, int32_t dw, uint32_t fButtons)
954	{
955	RT_NOREF1(dw);
956	int rc = VINF_SUCCESS;
957
958	/* Update internal accumulators and button state. */
959	pThis->iAccumX += dx;
960	pThis->iAccumY += dy;
961	pThis->iAccumZ += dz;
962	pThis->fAccumB \|= fButtons; /// @todo accumulate based on current protocol?
963	pThis->fCurrB = fButtons;
964
965	/* Report the event and start the throttle timer unless it's already running. */
966	if (!pThis->fThrottleActive)
967	{
968	ps2mReportAccumulatedEvents(pThis, (GeneriQ *)&pThis->evtQ, true);
969	KBCUpdateInterrupts(pThis->pParent);
970	pThis->fThrottleActive = true;
971	TMTimerSetMillies(pThis->CTX_SUFF(pThrottleTimer), pThis->uThrottleDelay);
972	}
973
974	return rc;
975	}
976
977	/* -=-=-=-=-=- Mouse: IMousePort -=-=-=-=-=- */
978
979	/**
980	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEvent}
981	*/
982	static DECLCALLBACK(int) ps2mPutEvent(PPDMIMOUSEPORT pInterface, int32_t dx, int32_t dy,
983	int32_t dz, int32_t dw, uint32_t fButtons)
984	{
985	PPS2M pThis = RT_FROM_MEMBER(pInterface, PS2M, Mouse.IPort);
986	int rc = PDMCritSectEnter(pThis->pCritSectR3, VERR_SEM_BUSY);
987	AssertReleaseRC(rc);
988
989	LogRelFlowFunc(("dX=%d dY=%d dZ=%d dW=%d buttons=%02X\n", dx, dy, dz, dw, fButtons));
990	/* NB: The PS/2 Y axis direction is inverted relative to ours. */
991	ps2mPutEventWorker(pThis, dx, -dy, dz, dw, fButtons);
992
993	PDMCritSectLeave(pThis->pCritSectR3);
994	return VINF_SUCCESS;
995	}
996
997	/**
998	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEventAbs}
999	*/
1000	static DECLCALLBACK(int) ps2mPutEventAbs(PPDMIMOUSEPORT pInterface, uint32_t x, uint32_t y,
1001	int32_t dz, int32_t dw, uint32_t fButtons)
1002	{
1003	AssertFailedReturn(VERR_NOT_SUPPORTED);
1004	NOREF(pInterface); NOREF(x); NOREF(y); NOREF(dz); NOREF(dw); NOREF(fButtons);
1005	}
1006
1007	/**
1008	* @interface_method_impl{PDMIMOUSEPORT,pfnPutEventMultiTouch}
1009	*/
1010	static DECLCALLBACK(int) ps2mPutEventMT(PPDMIMOUSEPORT pInterface, uint8_t cContacts,
1011	const uint64_t *pau64Contacts, uint32_t u32ScanTime)
1012	{
1013	AssertFailedReturn(VERR_NOT_SUPPORTED);
1014	NOREF(pInterface); NOREF(cContacts); NOREF(pau64Contacts); NOREF(u32ScanTime);
1015	}
1016
1017
1018
1019	/**
1020	* Attach command.
1021	*
1022	* This is called to let the device attach to a driver for a
1023	* specified LUN.
1024	*
1025	* This is like plugging in the mouse after turning on the
1026	* system.
1027	*
1028	* @returns VBox status code.
1029	* @param pThis The PS/2 auxiliary device instance data.
1030	* @param pDevIns The device instance.
1031	* @param iLUN The logical unit which is being detached.
1032	* @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
1033	*/
1034	int PS2MAttach(PPS2M pThis, PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
1035	{
1036	int rc;
1037
1038	/* The LUN must be 1, i.e. mouse. */
1039	Assert(iLUN == 1);
1040	AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG,
1041	("PS/2 mouse does not support hotplugging\n"),
1042	VERR_INVALID_PARAMETER);
1043
1044	LogFlowFunc(("iLUN=%d\n", iLUN));
1045
1046	rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThis->Mouse.IBase, &pThis->Mouse.pDrvBase, "Mouse Port");
1047	if (RT_SUCCESS(rc))
1048	{
1049	pThis->Mouse.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Mouse.pDrvBase, PDMIMOUSECONNECTOR);
1050	if (!pThis->Mouse.pDrv)
1051	{
1052	AssertLogRelMsgFailed(("LUN #1 doesn't have a mouse interface! rc=%Rrc\n", rc));
1053	rc = VERR_PDM_MISSING_INTERFACE;
1054	}
1055	}
1056	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
1057	{
1058	Log(("%s/%d: warning: no driver attached to LUN #1!\n", pDevIns->pReg->szName, pDevIns->iInstance));
1059	rc = VINF_SUCCESS;
1060	}
1061	else
1062	AssertLogRelMsgFailed(("Failed to attach LUN #1! rc=%Rrc\n", rc));
1063
1064	return rc;
1065	}
1066
1067	void PS2MSaveState(PPS2M pThis, PSSMHANDLE pSSM)
1068	{
1069	LogFlowFunc(("Saving PS2M state\n"));
1070
1071	/* Save the core auxiliary device state. */
1072	SSMR3PutU8(pSSM, pThis->u8State);
1073	SSMR3PutU8(pSSM, pThis->u8SampleRate);
1074	SSMR3PutU8(pSSM, pThis->u8Resolution);
1075	SSMR3PutU8(pSSM, pThis->u8CurrCmd);
1076	SSMR3PutU8(pSSM, pThis->enmMode);
1077	SSMR3PutU8(pSSM, pThis->enmProtocol);
1078	SSMR3PutU8(pSSM, pThis->enmKnockState);
1079
1080	/* Save the command and event queues. */
1081	ps2kSaveQueue(pSSM, (GeneriQ *)&pThis->cmdQ);
1082	ps2kSaveQueue(pSSM, (GeneriQ *)&pThis->evtQ);
1083
1084	/* Save the command delay timer. Note that the rate throttling
1085	* timer is not saved.
1086	*/
1087	TMR3TimerSave(pThis->CTX_SUFF(pDelayTimer), pSSM);
1088	}
1089
1090	int PS2MLoadState(PPS2M pThis, PSSMHANDLE pSSM, uint32_t uVersion)
1091	{
1092	uint8_t u8;
1093	int rc;
1094
1095	NOREF(uVersion);
1096	LogFlowFunc(("Loading PS2M state version %u\n", uVersion));
1097
1098	/* Load the basic auxiliary device state. */
1099	SSMR3GetU8(pSSM, &pThis->u8State);
1100	SSMR3GetU8(pSSM, &pThis->u8SampleRate);
1101	SSMR3GetU8(pSSM, &pThis->u8Resolution);
1102	SSMR3GetU8(pSSM, &pThis->u8CurrCmd);
1103	SSMR3GetU8(pSSM, &u8);
1104	pThis->enmMode = (PS2M_MODE)u8;
1105	SSMR3GetU8(pSSM, &u8);
1106	pThis->enmProtocol = (PS2M_PROTO)u8;
1107	SSMR3GetU8(pSSM, &u8);
1108	pThis->enmKnockState = (PS2M_KNOCK_STATE)u8;
1109
1110	/* Load the command and event queues. */
1111	rc = ps2kLoadQueue(pSSM, (GeneriQ *)&pThis->cmdQ);
1112	AssertRCReturn(rc, rc);
1113	rc = ps2kLoadQueue(pSSM, (GeneriQ *)&pThis->evtQ);
1114	AssertRCReturn(rc, rc);
1115
1116	/* Load the command delay timer, just in case. */
1117	rc = TMR3TimerLoad(pThis->CTX_SUFF(pDelayTimer), pSSM);
1118	AssertRCReturn(rc, rc);
1119
1120	/* Recalculate the throttling delay. */
1121	ps2mSetRate(pThis, pThis->u8SampleRate);
1122
1123	ps2mSetDriverState(pThis, !!(pThis->u8State & AUX_STATE_ENABLED));
1124
1125	return rc;
1126	}
1127
1128	void PS2MFixupState(PPS2M pThis, uint8_t u8State, uint8_t u8Rate, uint8_t u8Proto)
1129	{
1130	LogFlowFunc(("Fixing up old PS2M state version\n"));
1131
1132	/* Load the basic auxiliary device state. */
1133	pThis->u8State = u8State;
1134	pThis->u8SampleRate = u8Rate ? u8Rate : 40; /* In case it wasn't saved right. */
1135	pThis->enmProtocol = (PS2M_PROTO)u8Proto;
1136
1137	/* Recalculate the throttling delay. */
1138	ps2mSetRate(pThis, pThis->u8SampleRate);
1139
1140	ps2mSetDriverState(pThis, !!(pThis->u8State & AUX_STATE_ENABLED));
1141	}
1142
1143	void PS2MReset(PPS2M pThis)
1144	{
1145	LogFlowFunc(("Resetting PS2M\n"));
1146
1147	pThis->u8CurrCmd = 0;
1148
1149	/* Clear the queues. */
1150	ps2kClearQueue((GeneriQ *)&pThis->cmdQ);
1151	ps2mSetDefaults(pThis); /* Also clears event queue. */
1152	}
1153
1154	void PS2MRelocate(PPS2M pThis, RTGCINTPTR offDelta, PPDMDEVINS pDevIns)
1155	{
1156	RT_NOREF2(pDevIns, offDelta);
1157	LogFlowFunc(("Relocating PS2M\n"));
1158	pThis->pDelayTimerRC = TMTimerRCPtr(pThis->pDelayTimerR3);
1159	pThis->pThrottleTimerRC = TMTimerRCPtr(pThis->pThrottleTimerR3);
1160	}
1161
1162	int PS2MConstruct(PPS2M pThis, PPDMDEVINS pDevIns, void *pParent, int iInstance)
1163	{
1164	RT_NOREF1(iInstance);
1165
1166	LogFlowFunc(("iInstance=%d\n", iInstance));
1167
1168	#ifdef RT_STRICT
1169	ps2mTestAccumulation();
1170	#endif
1171
1172	pThis->pParent = pParent;
1173
1174	/* Initialize the queues. */
1175	pThis->evtQ.cSize = AUX_EVT_QUEUE_SIZE;
1176	pThis->cmdQ.cSize = AUX_CMD_QUEUE_SIZE;
1177
1178	pThis->Mouse.IBase.pfnQueryInterface = ps2mQueryInterface;
1179	pThis->Mouse.IPort.pfnPutEvent = ps2mPutEvent;
1180	pThis->Mouse.IPort.pfnPutEventAbs = ps2mPutEventAbs;
1181	pThis->Mouse.IPort.pfnPutEventMultiTouch = ps2mPutEventMT;
1182
1183	/*
1184	* Initialize the critical section pointer(s).
1185	*/
1186	pThis->pCritSectR3 = pDevIns->pCritSectRoR3;
1187
1188	/*
1189	* Create the input rate throttling timer. Does not use virtual time!
1190	*/
1191	PTMTIMER pTimer;
1192	int rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_REAL, ps2mThrottleTimer, pThis,
1193	TMTIMER_FLAGS_DEFAULT_CRIT_SECT, "PS2M Throttle Timer", &pTimer);
1194	if (RT_FAILURE(rc))
1195	return rc;
1196
1197	pThis->pThrottleTimerR3 = pTimer;
1198	pThis->pThrottleTimerR0 = TMTimerR0Ptr(pTimer);
1199	pThis->pThrottleTimerRC = TMTimerRCPtr(pTimer);
1200
1201	/*
1202	* Create the command delay timer.
1203	*/
1204	rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL, ps2mDelayTimer, pThis,
1205	TMTIMER_FLAGS_DEFAULT_CRIT_SECT, "PS2M Delay Timer", &pTimer);
1206	if (RT_FAILURE(rc))
1207	return rc;
1208
1209	pThis->pDelayTimerR3 = pTimer;
1210	pThis->pDelayTimerR0 = TMTimerR0Ptr(pTimer);
1211	pThis->pDelayTimerRC = TMTimerRCPtr(pTimer);
1212
1213	/*
1214	* Register debugger info callbacks.
1215	*/
1216	PDMDevHlpDBGFInfoRegister(pDevIns, "ps2m", "Display PS/2 mouse state.", ps2mInfoState);
1217
1218	/// @todo Where should we do this?
1219	ps2mSetDriverState(pThis, true);
1220	pThis->u8State = 0;
1221	pThis->enmMode = AUX_MODE_STD;
1222
1223	return rc;
1224	}
1225
1226	#endif
1227
1228	#if defined(RT_STRICT) && defined(IN_RING3)
1229	/* -=-=-=-=-=- Test code -=-=-=-=-=- */
1230
1231	/** Test the event accumulation mechanism which we use to delay events going
1232	* to the guest to one per 10ms (the default PS/2 mouse event rate). This
1233	* test depends on ps2mPutEventWorker() not touching the timer if
1234	* This.fThrottleActive is true. */
1235	/** @todo if we add any more tests it might be worth using a table of test
1236	* operations and checks. */
1237	static void ps2mTestAccumulation(void)
1238	{
1239	PS2M This;
1240	unsigned i;
1241	int rc;
1242	uint8_t b;
1243
1244	RT_ZERO(This);
1245	This.evtQ.cSize = AUX_EVT_QUEUE_SIZE;
1246	This.u8State = AUX_STATE_ENABLED;
1247	This.fThrottleActive = true;
1248	/* Certain Windows touch pad drivers report a double tap as a press, then
1249	* a release-press-release all within a single 10ms interval. Simulate
1250	* this to check that it is handled right. */
1251	ps2mPutEventWorker(&This, 0, 0, 0, 0, 1);
1252	if (ps2mHaveEvents(&This))
1253	ps2mReportAccumulatedEvents(&This, (GeneriQ *)&This.evtQ, true);
1254	ps2mPutEventWorker(&This, 0, 0, 0, 0, 0);
1255	if (ps2mHaveEvents(&This))
1256	ps2mReportAccumulatedEvents(&This, (GeneriQ *)&This.evtQ, true);
1257	ps2mPutEventWorker(&This, 0, 0, 0, 0, 1);
1258	ps2mPutEventWorker(&This, 0, 0, 0, 0, 0);
1259	if (ps2mHaveEvents(&This))
1260	ps2mReportAccumulatedEvents(&This, (GeneriQ *)&This.evtQ, true);
1261	if (ps2mHaveEvents(&This))
1262	ps2mReportAccumulatedEvents(&This, (GeneriQ *)&This.evtQ, true);
1263	for (i = 0; i < 12; ++i)
1264	{
1265	const uint8_t abExpected[] = { 9, 0, 0, 8, 0, 0, 9, 0, 0, 8, 0, 0};
1266
1267	rc = PS2MByteFromAux(&This, &b);
1268	AssertRCSuccess(rc);
1269	Assert(b == abExpected[i]);
1270	}
1271	rc = PS2MByteFromAux(&This, &b);
1272	Assert(rc != VINF_SUCCESS);
1273	/* Button hold down during mouse drags was broken at some point during
1274	* testing fixes for the previous issue. Test that that works. */
1275	ps2mPutEventWorker(&This, 0, 0, 0, 0, 1);
1276	if (ps2mHaveEvents(&This))
1277	ps2mReportAccumulatedEvents(&This, (GeneriQ *)&This.evtQ, true);
1278	if (ps2mHaveEvents(&This))
1279	ps2mReportAccumulatedEvents(&This, (GeneriQ *)&This.evtQ, true);
1280	for (i = 0; i < 3; ++i)
1281	{
1282	const uint8_t abExpected[] = { 9, 0, 0 };
1283
1284	rc = PS2MByteFromAux(&This, &b);
1285	AssertRCSuccess(rc);
1286	Assert(b == abExpected[i]);
1287	}
1288	rc = PS2MByteFromAux(&This, &b);
1289	Assert(rc != VINF_SUCCESS);
1290	}
1291	#endif /* RT_STRICT && IN_RING3 */
1292
1293	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Input/PS2M.cpp@ 76263

Download in other formats: