UsbKbd.cpp@ 68080

Last change on this file since 68080 was 66989, checked in by vboxsync, 8 years ago
VUSB: Collect opaque class-specific data between config and interface descriptors. See bugref:8769
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 45.5 KB

Line
1	/* $Id: UsbKbd.cpp 66989 2017-05-19 14:42:59Z vboxsync $ */
2	/** @file
3	* UsbKbd - USB Human Interface Device Emulation, Keyboard.
4	*/
5
6	/*
7	* Copyright (C) 2007-2016 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18	/** @page pg_usb_kbd USB Keyboard Device Emulation.
19	*
20	* This module implements a standard USB keyboard which uses the boot
21	* interface. The keyboard sends reports which have room for up to six
22	* normal keys and all standard modifier keys. A report always reflects the
23	* current state of the keyboard and indicates which keys are held down.
24	*
25	* Software normally utilizes the keyboard's interrupt endpoint to request
26	* reports to be sent whenever a state change occurs. However, reports can
27	* also be sent whenever an interrupt transfer is initiated (the keyboard is
28	* not "idle") or requested via the control endpoint (polling).
29	*
30	* Because turnaround on USB is relatively slow, the keyboard often ends up
31	* in a situation where new input arrived but there is no URB available
32	* where a report could be written to. The PDM queue maintained by the
33	* keyboard driver is utilized to provide buffering and hold incoming events
34	* until they can be passed along. The USB keyboard can effectively buffer
35	* up to one event.
36	*
37	* If there is a pending event and a new URB becomes available, a report is
38	* built and the keyboard queue is flushed. This ensures that queued events
39	* are processed as quickly as possible.
40	*
41	*
42	* References:
43	*
44	* Device Class Definition for Human Interface Devices (HID), Version 1.11
45	*
46	*/
47
48
49	/*********************************************************************************************************************************
50	* Header Files *
51	*********************************************************************************************************************************/
52	#define LOG_GROUP LOG_GROUP_USB_KBD
53	#include <VBox/vmm/pdmusb.h>
54	#include <VBox/log.h>
55	#include <VBox/err.h>
56	#include <iprt/assert.h>
57	#include <iprt/critsect.h>
58	#include <iprt/mem.h>
59	#include <iprt/semaphore.h>
60	#include <iprt/string.h>
61	#include <iprt/uuid.h>
62	#include "VBoxDD.h"
63
64
65	/*********************************************************************************************************************************
66	* Defined Constants And Macros *
67	*********************************************************************************************************************************/
68	/** @name USB HID string IDs
69	* @{ */
70	#define USBHID_STR_ID_MANUFACTURER 1
71	#define USBHID_STR_ID_PRODUCT 2
72	/** @} */
73
74	/** @name USB HID specific descriptor types
75	* @{ */
76	#define DT_IF_HID_DESCRIPTOR 0x21
77	#define DT_IF_HID_REPORT 0x22
78	/** @} */
79
80	/** @name USB HID vendor and product IDs
81	* @{ */
82	#define VBOX_USB_VENDOR 0x80EE
83	#define USBHID_PID_KEYBOARD 0x0010
84	/** @} */
85
86	/** @name USB HID class specific requests
87	* @{ */
88	#define HID_REQ_GET_REPORT 0x01
89	#define HID_REQ_GET_IDLE 0x02
90	#define HID_REQ_SET_REPORT 0x09
91	#define HID_REQ_SET_IDLE 0x0A
92	/** @} */
93
94	/** @name USB HID additional constants
95	* @{ */
96	/** The highest USB usage code reported by the VBox emulated keyboard */
97	#define VBOX_USB_MAX_USAGE_CODE 0xE7
98	/** The size of an array needed to store all USB usage codes */
99	#define VBOX_USB_USAGE_ARRAY_SIZE (VBOX_USB_MAX_USAGE_CODE + 1)
100	#define USBHID_USAGE_ROLL_OVER 1
101	/** The usage code of the first modifier key. */
102	#define USBHID_MODIFIER_FIRST 0xE0
103	/** The usage code of the last modifier key. */
104	#define USBHID_MODIFIER_LAST 0xE7
105	/** @} */
106
107
108	/*********************************************************************************************************************************
109	* Structures and Typedefs *
110	*********************************************************************************************************************************/
111
112	/**
113	* The USB HID request state.
114	*/
115	typedef enum USBHIDREQSTATE
116	{
117	/** Invalid status. */
118	USBHIDREQSTATE_INVALID = 0,
119	/** Ready to receive a new read request. */
120	USBHIDREQSTATE_READY,
121	/** Have (more) data for the host. */
122	USBHIDREQSTATE_DATA_TO_HOST,
123	/** Waiting to supply status information to the host. */
124	USBHIDREQSTATE_STATUS,
125	/** The end of the valid states. */
126	USBHIDREQSTATE_END
127	} USBHIDREQSTATE;
128
129
130	/**
131	* Endpoint status data.
132	*/
133	typedef struct USBHIDEP
134	{
135	bool fHalted;
136	} USBHIDEP;
137	/** Pointer to the endpoint status. */
138	typedef USBHIDEP *PUSBHIDEP;
139
140
141	/**
142	* A URB queue.
143	*/
144	typedef struct USBHIDURBQUEUE
145	{
146	/** The head pointer. */
147	PVUSBURB pHead;
148	/** Where to insert the next entry. */
149	PVUSBURB *ppTail;
150	} USBHIDURBQUEUE;
151	/** Pointer to a URB queue. */
152	typedef USBHIDURBQUEUE *PUSBHIDURBQUEUE;
153	/** Pointer to a const URB queue. */
154	typedef USBHIDURBQUEUE const *PCUSBHIDURBQUEUE;
155
156
157	/**
158	* The USB HID report structure for regular keys.
159	*/
160	typedef struct USBHIDK_REPORT
161	{
162	uint8_t ShiftState; /*< Modifier keys bitfield /
163	uint8_t Reserved; /*< Currently unused /
164	uint8_t aKeys[6]; /*< Normal keys /
165	} USBHIDK_REPORT, *PUSBHIDK_REPORT;
166
167	/**
168	* The USB HID instance data.
169	*/
170	typedef struct USBHID
171	{
172	/** Pointer back to the PDM USB Device instance structure. */
173	PPDMUSBINS pUsbIns;
174	/** Critical section protecting the device state. */
175	RTCRITSECT CritSect;
176
177	/** The current configuration.
178	* (0 - default, 1 - the one supported configuration, i.e configured.) */
179	uint8_t bConfigurationValue;
180	/** USB HID Idle value.
181	* (0 - only report state change, !=0 - report in bIdle * 4ms intervals.) */
182	uint8_t bIdle;
183	/** Endpoint 0 is the default control pipe, 1 is the dev->host interrupt one. */
184	USBHIDEP aEps[2];
185	/** The state of the HID (state machine).*/
186	USBHIDREQSTATE enmState;
187
188	/** Pending to-host queue.
189	* The URBs waiting here are waiting for data to become available.
190	*/
191	USBHIDURBQUEUE ToHostQueue;
192
193	/** Done queue
194	* The URBs stashed here are waiting to be reaped. */
195	USBHIDURBQUEUE DoneQueue;
196	/** Signalled when adding an URB to the done queue and fHaveDoneQueueWaiter
197	* is set. */
198	RTSEMEVENT hEvtDoneQueue;
199	/** Someone is waiting on the done queue. */
200	bool fHaveDoneQueueWaiter;
201	/** If device has pending changes. */
202	bool fHasPendingChanges;
203	/** Currently depressed keys */
204	uint8_t abDepressedKeys[VBOX_USB_USAGE_ARRAY_SIZE];
205
206	/**
207	* Keyboard port - LUN#0.
208	*
209	* @implements PDMIBASE
210	* @implements PDMIKEYBOARDPORT
211	*/
212	struct
213	{
214	/** The base interface for the keyboard port. */
215	PDMIBASE IBase;
216	/** The keyboard port base interface. */
217	PDMIKEYBOARDPORT IPort;
218
219	/** The base interface of the attached keyboard driver. */
220	R3PTRTYPE(PPDMIBASE) pDrvBase;
221	/** The keyboard interface of the attached keyboard driver. */
222	R3PTRTYPE(PPDMIKEYBOARDCONNECTOR) pDrv;
223	} Lun0;
224	} USBHID;
225	/** Pointer to the USB HID instance data. */
226	typedef USBHID *PUSBHID;
227
228
229	/*********************************************************************************************************************************
230	* Global Variables *
231	*********************************************************************************************************************************/
232	static const PDMUSBDESCCACHESTRING g_aUsbHidStrings_en_US[] =
233	{
234	{ USBHID_STR_ID_MANUFACTURER, "VirtualBox" },
235	{ USBHID_STR_ID_PRODUCT, "USB Keyboard" },
236	};
237
238	static const PDMUSBDESCCACHELANG g_aUsbHidLanguages[] =
239	{
240	{ 0x0409, RT_ELEMENTS(g_aUsbHidStrings_en_US), g_aUsbHidStrings_en_US }
241	};
242
243	static const VUSBDESCENDPOINTEX g_aUsbHidEndpointDescs[] =
244	{
245	{
246	{
247	/* .bLength = */ sizeof(VUSBDESCENDPOINT),
248	/* .bDescriptorType = */ VUSB_DT_ENDPOINT,
249	/* .bEndpointAddress = / 0x81 / ep=1, in */,
250	/* .bmAttributes = / 3 / interrupt */,
251	/* .wMaxPacketSize = */ 8,
252	/* .bInterval = */ 10,
253	},
254	/* .pvMore = */ NULL,
255	/* .pvClass = */ NULL,
256	/* .cbClass = */ 0
257	},
258	};
259
260	/** HID report descriptor. */
261	static const uint8_t g_UsbHidReportDesc[] =
262	{
263	/* Usage Page / 0x05, 0x01, / Generic Desktop */
264	/* Usage / 0x09, 0x06, / Keyboard */
265	/* Collection / 0xA1, 0x01, / Application */
266	/* Usage Page / 0x05, 0x07, / Keyboard */
267	/* Usage Minimum / 0x19, 0xE0, / Left Ctrl Key */
268	/* Usage Maximum / 0x29, 0xE7, / Right GUI Key */
269	/* Logical Minimum / 0x15, 0x00, / 0 */
270	/* Logical Maximum / 0x25, 0x01, / 1 */
271	/* Report Count / 0x95, 0x08, / 8 */
272	/* Report Size / 0x75, 0x01, / 1 */
273	/* Input / 0x81, 0x02, / Data, Value, Absolute, Bit field */
274	/* Report Count / 0x95, 0x01, / 1 */
275	/* Report Size / 0x75, 0x08, / 8 (padding bits) */
276	/* Input / 0x81, 0x01, / Constant, Array, Absolute, Bit field */
277	/* Report Count / 0x95, 0x05, / 5 */
278	/* Report Size / 0x75, 0x01, / 1 */
279	/* Usage Page / 0x05, 0x08, / LEDs */
280	/* Usage Minimum / 0x19, 0x01, / Num Lock */
281	/* Usage Maximum / 0x29, 0x05, / Kana */
282	/* Output / 0x91, 0x02, / Data, Value, Absolute, Non-volatile,Bit field */
283	/* Report Count / 0x95, 0x01, / 1 */
284	/* Report Size / 0x75, 0x03, / 3 */
285	/* Output / 0x91, 0x01, / Constant, Value, Absolute, Non-volatile, Bit field */
286	/* Report Count / 0x95, 0x06, / 6 */
287	/* Report Size / 0x75, 0x08, / 8 */
288	/* Logical Minimum / 0x15, 0x00, / 0 */
289	/* Logical Maximum / 0x26, 0xFF,0x00,/ 255 */
290	/* Usage Page / 0x05, 0x07, / Keyboard */
291	/* Usage Minimum / 0x19, 0x00, / 0 */
292	/* Usage Maximum / 0x29, 0xFF, / 255 */
293	/* Input / 0x81, 0x00, / Data, Array, Absolute, Bit field */
294	/* End Collection */ 0xC0,
295	};
296
297	/** Additional HID class interface descriptor. */
298	static const uint8_t g_UsbHidIfHidDesc[] =
299	{
300	/* .bLength = */ 0x09,
301	/* .bDescriptorType = / 0x21, / HID */
302	/* .bcdHID = / 0x10, 0x01, / 1.1 */
303	/* .bCountryCode = / 0x0D, / International (ISO) */
304	/* .bNumDescriptors = */ 1,
305	/* .bDescriptorType = / 0x22, / Report */
306	/* .wDescriptorLength = */ sizeof(g_UsbHidReportDesc), 0x00
307	};
308
309	static const VUSBDESCINTERFACEEX g_UsbHidInterfaceDesc =
310	{
311	{
312	/* .bLength = */ sizeof(VUSBDESCINTERFACE),
313	/* .bDescriptorType = */ VUSB_DT_INTERFACE,
314	/* .bInterfaceNumber = */ 0,
315	/* .bAlternateSetting = */ 0,
316	/* .bNumEndpoints = */ 1,
317	/* .bInterfaceClass = / 3 / HID */,
318	/* .bInterfaceSubClass = / 1 / Boot Interface */,
319	/* .bInterfaceProtocol = / 1 / Keyboard */,
320	/* .iInterface = */ 0
321	},
322	/* .pvMore = */ NULL,
323	/* .pvClass = */ &g_UsbHidIfHidDesc,
324	/* .cbClass = */ sizeof(g_UsbHidIfHidDesc),
325	&g_aUsbHidEndpointDescs[0],
326	/* .pIAD = */ NULL,
327	/* .cbIAD = */ 0
328	};
329
330	static const VUSBINTERFACE g_aUsbHidInterfaces[] =
331	{
332	{ &g_UsbHidInterfaceDesc, /* .cSettings = */ 1 },
333	};
334
335	static const VUSBDESCCONFIGEX g_UsbHidConfigDesc =
336	{
337	{
338	/* .bLength = */ sizeof(VUSBDESCCONFIG),
339	/* .bDescriptorType = */ VUSB_DT_CONFIG,
340	/* .wTotalLength = / 0 / recalculated on read */,
341	/* .bNumInterfaces = */ RT_ELEMENTS(g_aUsbHidInterfaces),
342	/* .bConfigurationValue =*/ 1,
343	/* .iConfiguration = */ 0,
344	/* .bmAttributes = */ RT_BIT(7),
345	/* .MaxPower = / 50 / 100mA */
346	},
347	NULL, /* pvMore */
348	NULL, /* pvClass */
349	0, /* cbClass */
350	&g_aUsbHidInterfaces[0],
351	NULL /* pvOriginal */
352	};
353
354	static const VUSBDESCDEVICE g_UsbHidDeviceDesc =
355	{
356	/* .bLength = */ sizeof(g_UsbHidDeviceDesc),
357	/* .bDescriptorType = */ VUSB_DT_DEVICE,
358	/* .bcdUsb = / 0x110, / 1.1 */
359	/* .bDeviceClass = / 0 / Class specified in the interface desc. */,
360	/* .bDeviceSubClass = / 0 / Subclass specified in the interface desc. */,
361	/* .bDeviceProtocol = / 0 / Protocol specified in the interface desc. */,
362	/* .bMaxPacketSize0 = */ 8,
363	/* .idVendor = */ VBOX_USB_VENDOR,
364	/* .idProduct = */ USBHID_PID_KEYBOARD,
365	/* .bcdDevice = / 0x0100, / 1.0 */
366	/* .iManufacturer = */ USBHID_STR_ID_MANUFACTURER,
367	/* .iProduct = */ USBHID_STR_ID_PRODUCT,
368	/* .iSerialNumber = */ 0,
369	/* .bNumConfigurations = */ 1
370	};
371
372	static const PDMUSBDESCCACHE g_UsbHidDescCache =
373	{
374	/* .pDevice = */ &g_UsbHidDeviceDesc,
375	/* .paConfigs = */ &g_UsbHidConfigDesc,
376	/* .paLanguages = */ g_aUsbHidLanguages,
377	/* .cLanguages = */ RT_ELEMENTS(g_aUsbHidLanguages),
378	/* .fUseCachedDescriptors = */ true,
379	/* .fUseCachedStringsDescriptors = */ true
380	};
381
382
383	/*********************************************************************************************************************************
384	* Internal Functions *
385	*********************************************************************************************************************************/
386
387
388	/**
389	* Initializes an URB queue.
390	*
391	* @param pQueue The URB queue.
392	*/
393	static void usbHidQueueInit(PUSBHIDURBQUEUE pQueue)
394	{
395	pQueue->pHead = NULL;
396	pQueue->ppTail = &pQueue->pHead;
397	}
398
399	/**
400	* Inserts an URB at the end of the queue.
401	*
402	* @param pQueue The URB queue.
403	* @param pUrb The URB to insert.
404	*/
405	DECLINLINE(void) usbHidQueueAddTail(PUSBHIDURBQUEUE pQueue, PVUSBURB pUrb)
406	{
407	pUrb->Dev.pNext = NULL;
408	*pQueue->ppTail = pUrb;
409	pQueue->ppTail = &pUrb->Dev.pNext;
410	}
411
412
413	/**
414	* Unlinks the head of the queue and returns it.
415	*
416	* @returns The head entry.
417	* @param pQueue The URB queue.
418	*/
419	DECLINLINE(PVUSBURB) usbHidQueueRemoveHead(PUSBHIDURBQUEUE pQueue)
420	{
421	PVUSBURB pUrb = pQueue->pHead;
422	if (pUrb)
423	{
424	PVUSBURB pNext = pUrb->Dev.pNext;
425	pQueue->pHead = pNext;
426	if (!pNext)
427	pQueue->ppTail = &pQueue->pHead;
428	else
429	pUrb->Dev.pNext = NULL;
430	}
431	return pUrb;
432	}
433
434
435	/**
436	* Removes an URB from anywhere in the queue.
437	*
438	* @returns true if found, false if not.
439	* @param pQueue The URB queue.
440	* @param pUrb The URB to remove.
441	*/
442	DECLINLINE(bool) usbHidQueueRemove(PUSBHIDURBQUEUE pQueue, PVUSBURB pUrb)
443	{
444	PVUSBURB pCur = pQueue->pHead;
445	if (pCur == pUrb)
446	pQueue->pHead = pUrb->Dev.pNext;
447	else
448	{
449	while (pCur)
450	{
451	if (pCur->Dev.pNext == pUrb)
452	{
453	pCur->Dev.pNext = pUrb->Dev.pNext;
454	break;
455	}
456	pCur = pCur->Dev.pNext;
457	}
458	if (!pCur)
459	return false;
460	}
461	if (!pUrb->Dev.pNext)
462	pQueue->ppTail = &pQueue->pHead;
463	return true;
464	}
465
466
467	#if 0 /* unused */
468	/**
469	* Checks if the queue is empty or not.
470	*
471	* @returns true if it is, false if it isn't.
472	* @param pQueue The URB queue.
473	*/
474	DECLINLINE(bool) usbHidQueueIsEmpty(PCUSBHIDURBQUEUE pQueue)
475	{
476	return pQueue->pHead == NULL;
477	}
478	#endif /* unused */
479
480
481	/**
482	* Links an URB into the done queue.
483	*
484	* @param pThis The HID instance.
485	* @param pUrb The URB.
486	*/
487	static void usbHidLinkDone(PUSBHID pThis, PVUSBURB pUrb)
488	{
489	usbHidQueueAddTail(&pThis->DoneQueue, pUrb);
490
491	if (pThis->fHaveDoneQueueWaiter)
492	{
493	int rc = RTSemEventSignal(pThis->hEvtDoneQueue);
494	AssertRC(rc);
495	}
496	}
497
498
499	/**
500	* Completes the URB with a stalled state, halting the pipe.
501	*/
502	static int usbHidCompleteStall(PUSBHID pThis, PUSBHIDEP pEp, PVUSBURB pUrb, const char *pszWhy)
503	{
504	RT_NOREF1(pszWhy);
505	Log(("usbHidCompleteStall/#%u: pUrb=%p:%s: %s\n", pThis->pUsbIns->iInstance, pUrb, pUrb->pszDesc, pszWhy));
506
507	pUrb->enmStatus = VUSBSTATUS_STALL;
508
509	/** @todo figure out if the stall is global or pipe-specific or both. */
510	if (pEp)
511	pEp->fHalted = true;
512	else
513	{
514	pThis->aEps[0].fHalted = true;
515	pThis->aEps[1].fHalted = true;
516	}
517
518	usbHidLinkDone(pThis, pUrb);
519	return VINF_SUCCESS;
520	}
521
522
523	/**
524	* Completes the URB with a OK state.
525	*/
526	static int usbHidCompleteOk(PUSBHID pThis, PVUSBURB pUrb, size_t cbData)
527	{
528	Log(("usbHidCompleteOk/#%u: pUrb=%p:%s cbData=%#zx\n", pThis->pUsbIns->iInstance, pUrb, pUrb->pszDesc, cbData));
529
530	pUrb->enmStatus = VUSBSTATUS_OK;
531	pUrb->cbData = (uint32_t)cbData;
532
533	usbHidLinkDone(pThis, pUrb);
534	return VINF_SUCCESS;
535	}
536
537
538	/**
539	* Reset worker for usbHidUsbReset, usbHidUsbSetConfiguration and
540	* usbHidHandleDefaultPipe.
541	*
542	* @returns VBox status code.
543	* @param pThis The HID instance.
544	* @param pUrb Set when usbHidHandleDefaultPipe is the
545	* caller.
546	* @param fSetConfig Set when usbHidUsbSetConfiguration is the
547	* caller.
548	*/
549	static int usbHidResetWorker(PUSBHID pThis, PVUSBURB pUrb, bool fSetConfig)
550	{
551	/*
552	* Deactivate the keyboard.
553	*/
554	pThis->Lun0.pDrv->pfnSetActive(pThis->Lun0.pDrv, false);
555
556	/*
557	* Reset the device state.
558	*/
559	pThis->enmState = USBHIDREQSTATE_READY;
560	pThis->bIdle = 0;
561	pThis->fHasPendingChanges = false;
562
563	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aEps); i++)
564	pThis->aEps[i].fHalted = false;
565
566	if (!pUrb && !fSetConfig) /* (only device reset) */
567	pThis->bConfigurationValue = 0; /* default */
568
569	/*
570	* Ditch all pending URBs.
571	*/
572	PVUSBURB pCurUrb;
573	while ((pCurUrb = usbHidQueueRemoveHead(&pThis->ToHostQueue)) != NULL)
574	{
575	pCurUrb->enmStatus = VUSBSTATUS_CRC;
576	usbHidLinkDone(pThis, pCurUrb);
577	}
578
579	if (pUrb)
580	return usbHidCompleteOk(pThis, pUrb, 0);
581	return VINF_SUCCESS;
582	}
583
584	/**
585	* Returns true if the usage code corresponds to a keyboard modifier key
586	* (left or right ctrl, shift, alt or GUI). The usage codes for these keys
587	* are the range 0xe0 to 0xe7.
588	*/
589	static bool usbHidUsageCodeIsModifier(uint8_t u8Usage)
590	{
591	return u8Usage >= USBHID_MODIFIER_FIRST && u8Usage <= USBHID_MODIFIER_LAST;
592	}
593
594	/**
595	* Convert a USB HID usage code to a keyboard modifier flag. The arithmetic
596	* is simple: the modifier keys have usage codes from 0xe0 to 0xe7, and the
597	* lower nibble is the bit number of the flag.
598	*/
599	static uint8_t usbHidModifierToFlag(uint8_t u8Usage)
600	{
601	Assert(usbHidUsageCodeIsModifier(u8Usage));
602	return RT_BIT(u8Usage & 0xf);
603	}
604
605	/**
606	* Create a USB HID keyboard report reflecting the current state of the
607	* keyboard (up/down keys).
608	*/
609	static void usbHidBuildReport(PUSBHIDK_REPORT pReport, uint8_t *pabDepressedKeys)
610	{
611	unsigned iBuf = 0;
612	RT_ZERO(*pReport);
613	for (unsigned iKey = 0; iKey < VBOX_USB_USAGE_ARRAY_SIZE; ++iKey)
614	{
615	Assert(iBuf <= RT_ELEMENTS(pReport->aKeys));
616	if (pabDepressedKeys[iKey])
617	{
618	if (usbHidUsageCodeIsModifier(iKey))
619	pReport->ShiftState \|= usbHidModifierToFlag(iKey);
620	else if (iBuf == RT_ELEMENTS(pReport->aKeys))
621	{
622	/* The USB HID spec says that the entire vector should be
623	* set to ErrorRollOver on overflow. We don't mind if this
624	* path is taken several times for one report. */
625	for (unsigned iBuf2 = 0;
626	iBuf2 < RT_ELEMENTS(pReport->aKeys); ++iBuf2)
627	pReport->aKeys[iBuf2] = USBHID_USAGE_ROLL_OVER;
628	}
629	else
630	{
631	pReport->aKeys[iBuf] = iKey;
632	++iBuf;
633	}
634	}
635	}
636	}
637
638	/**
639	* Handles a SET_REPORT request sent to the default control pipe. Note
640	* that unrecognized requests are ignored without reporting an error.
641	*/
642	static void usbHidSetReport(PUSBHID pThis, PVUSBURB pUrb)
643	{
644	PVUSBSETUP pSetup = (PVUSBSETUP)&pUrb->abData[0];
645	Assert(pSetup->bRequest == HID_REQ_SET_REPORT);
646
647	/* The LED report is the 3rd report, ID 0 (-> wValue 0x200). */
648	if (pSetup->wIndex == 0 && pSetup->wLength == 1 && pSetup->wValue == 0x200)
649	{
650	PDMKEYBLEDS enmLeds = PDMKEYBLEDS_NONE;
651	uint8_t u8LEDs = pUrb->abData[sizeof(*pSetup)];
652	LogFlowFunc(("Setting keybooard LEDs to u8LEDs=%02X\n", u8LEDs));
653
654	/* Translate LED state to PDM format and send upstream. */
655	if (u8LEDs & 0x01)
656	enmLeds = (PDMKEYBLEDS)(enmLeds \| PDMKEYBLEDS_NUMLOCK);
657	if (u8LEDs & 0x02)
658	enmLeds = (PDMKEYBLEDS)(enmLeds \| PDMKEYBLEDS_CAPSLOCK);
659	if (u8LEDs & 0x04)
660	enmLeds = (PDMKEYBLEDS)(enmLeds \| PDMKEYBLEDS_SCROLLLOCK);
661
662	pThis->Lun0.pDrv->pfnLedStatusChange(pThis->Lun0.pDrv, enmLeds);
663	}
664	}
665
666	/**
667	* Sends a state report to the guest if there is a URB available.
668	*/
669	static void usbHidSendReport(PUSBHID pThis)
670	{
671	PVUSBURB pUrb = usbHidQueueRemoveHead(&pThis->ToHostQueue);
672	if (pUrb)
673	{
674	PUSBHIDK_REPORT pReport = (PUSBHIDK_REPORT)&pUrb->abData[0];
675
676	usbHidBuildReport(pReport, pThis->abDepressedKeys);
677	pThis->fHasPendingChanges = false;
678	usbHidCompleteOk(pThis, pUrb, sizeof(*pReport));
679	}
680	else
681	{
682	Log2(("No available URB for USB kbd\n"));
683	pThis->fHasPendingChanges = true;
684	}
685	}
686
687	/**
688	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
689	*/
690	static DECLCALLBACK(void ) usbHidKeyboardQueryInterface(PPDMIBASE pInterface, const char pszIID)
691	{
692	PUSBHID pThis = RT_FROM_MEMBER(pInterface, USBHID, Lun0.IBase);
693	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Lun0.IBase);
694	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIKEYBOARDPORT, &pThis->Lun0.IPort);
695	return NULL;
696	}
697
698	/* See the PS2K device. */
699	#define KRSP_BAT_FAIL 0xFC /* Also a 'release keys' signal. */
700
701	/**
702	* Keyboard event handler.
703	*
704	* @returns VBox status code.
705	* @param pInterface Pointer to the keyboard port interface (KBDState::Keyboard.IPort).
706	* @param u32UsageCode The key usage ID.
707	*/
708	static DECLCALLBACK(int) usbHidKeyboardPutEvent(PPDMIKEYBOARDPORT pInterface, uint32_t u32UsageCode)
709	{
710	PUSBHID pThis = RT_FROM_MEMBER(pInterface, USBHID, Lun0.IPort);
711	uint8_t u8HidCode;
712	bool fKeyDown;
713	bool fHaveEvent = true;
714	int rc = VINF_SUCCESS;
715
716	RTCritSectEnter(&pThis->CritSect);
717
718	/* Let's see what we got... */
719	fKeyDown = !(u32UsageCode & 0x80000000);
720	u8HidCode = u32UsageCode & 0xFF;
721	AssertReturn(u8HidCode <= VBOX_USB_MAX_USAGE_CODE, VERR_INTERNAL_ERROR);
722
723	LogFlowFunc(("key %s: 0x%x\n", fKeyDown ? "down" : "up", u8HidCode));
724
725	/*
726	* Due to host key repeat, we can get key events for keys which are
727	* already depressed. Drop those right here.
728	*/
729	if (fKeyDown && pThis->abDepressedKeys[u8HidCode])
730	fHaveEvent = false;
731
732	/* If there is already a pending event, we won't accept a new one yet. */
733	if (pThis->fHasPendingChanges && fHaveEvent)
734	{
735	rc = VERR_TRY_AGAIN;
736	}
737	else if (fHaveEvent)
738	{
739	if (RT_UNLIKELY(u32UsageCode == KRSP_BAT_FAIL))
740	{
741	/* Clear all currently depressed and unreported keys. */
742	RT_ZERO(pThis->abDepressedKeys);
743	}
744	else
745	{
746	/* Regular key event - update keyboard state. */
747	if (fKeyDown)
748	pThis->abDepressedKeys[u8HidCode] = 1;
749	else
750	pThis->abDepressedKeys[u8HidCode] = 0;
751	}
752
753	/*
754	* Try sending a report. Note that we already decided to consume the
755	* event regardless of whether a URB is available or not. If it's not,
756	* we will simply not accept any further events.
757	*/
758	usbHidSendReport(pThis);
759	}
760
761	RTCritSectLeave(&pThis->CritSect);
762
763	return rc;
764	}
765
766	/**
767	* @interface_method_impl{PDMUSBREG,pfnUrbReap}
768	*/
769	static DECLCALLBACK(PVUSBURB) usbHidUrbReap(PPDMUSBINS pUsbIns, RTMSINTERVAL cMillies)
770	{
771	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
772	//LogFlow(("usbHidUrbReap/#%u: cMillies=%u\n", pUsbIns->iInstance, cMillies));
773
774	RTCritSectEnter(&pThis->CritSect);
775
776	PVUSBURB pUrb = usbHidQueueRemoveHead(&pThis->DoneQueue);
777	if (!pUrb && cMillies)
778	{
779	/* Wait */
780	pThis->fHaveDoneQueueWaiter = true;
781	RTCritSectLeave(&pThis->CritSect);
782
783	RTSemEventWait(pThis->hEvtDoneQueue, cMillies);
784
785	RTCritSectEnter(&pThis->CritSect);
786	pThis->fHaveDoneQueueWaiter = false;
787
788	pUrb = usbHidQueueRemoveHead(&pThis->DoneQueue);
789	}
790
791	RTCritSectLeave(&pThis->CritSect);
792
793	if (pUrb)
794	Log(("usbHidUrbReap/#%u: pUrb=%p:%s\n", pUsbIns->iInstance, pUrb, pUrb->pszDesc));
795	return pUrb;
796	}
797
798
799	/**
800	* @interface_method_impl{PDMUSBREG,pfnWakeup}
801	*/
802	static DECLCALLBACK(int) usbHidWakeup(PPDMUSBINS pUsbIns)
803	{
804	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
805
806	return RTSemEventSignal(pThis->hEvtDoneQueue);
807	}
808
809
810	/**
811	* @interface_method_impl{PDMUSBREG,pfnUrbCancel}
812	*/
813	static DECLCALLBACK(int) usbHidUrbCancel(PPDMUSBINS pUsbIns, PVUSBURB pUrb)
814	{
815	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
816	LogFlow(("usbHidUrbCancel/#%u: pUrb=%p:%s\n", pUsbIns->iInstance, pUrb, pUrb->pszDesc));
817	RTCritSectEnter(&pThis->CritSect);
818
819	/*
820	* Remove the URB from the to-host queue and move it onto the done queue.
821	*/
822	if (usbHidQueueRemove(&pThis->ToHostQueue, pUrb))
823	usbHidLinkDone(pThis, pUrb);
824
825	RTCritSectLeave(&pThis->CritSect);
826	return VINF_SUCCESS;
827	}
828
829
830	/**
831	* Handles request sent to the inbound (device to host) interrupt pipe. This is
832	* rather different from bulk requests because an interrupt read URB may complete
833	* after arbitrarily long time.
834	*/
835	static int usbHidHandleIntrDevToHost(PUSBHID pThis, PUSBHIDEP pEp, PVUSBURB pUrb)
836	{
837	/*
838	* Stall the request if the pipe is halted.
839	*/
840	if (RT_UNLIKELY(pEp->fHalted))
841	return usbHidCompleteStall(pThis, NULL, pUrb, "Halted pipe");
842
843	/*
844	* Deal with the URB according to the state.
845	*/
846	switch (pThis->enmState)
847	{
848	/*
849	* We've data left to transfer to the host.
850	*/
851	case USBHIDREQSTATE_DATA_TO_HOST:
852	{
853	AssertFailed();
854	Log(("usbHidHandleIntrDevToHost: Entering STATUS\n"));
855	return usbHidCompleteOk(pThis, pUrb, 0);
856	}
857
858	/*
859	* Status transfer.
860	*/
861	case USBHIDREQSTATE_STATUS:
862	{
863	AssertFailed();
864	Log(("usbHidHandleIntrDevToHost: Entering READY\n"));
865	pThis->enmState = USBHIDREQSTATE_READY;
866	return usbHidCompleteOk(pThis, pUrb, 0);
867	}
868
869	case USBHIDREQSTATE_READY:
870	usbHidQueueAddTail(&pThis->ToHostQueue, pUrb);
871	/* If device was not set idle, send the current report right away. */
872	if (pThis->bIdle != 0 \|\| pThis->fHasPendingChanges)
873	{
874	usbHidSendReport(pThis);
875	LogFlow(("usbHidHandleIntrDevToHost: Sent report via %p:%s\n", pUrb, pUrb->pszDesc));
876	Assert(!pThis->fHasPendingChanges); /* Since we just got a URB... */
877	/* There may be more input queued up. Ask for it now. */
878	pThis->Lun0.pDrv->pfnFlushQueue(pThis->Lun0.pDrv);
879	}
880	return VINF_SUCCESS;
881
882	/*
883	* Bad states, stall.
884	*/
885	default:
886	Log(("usbHidHandleIntrDevToHost: enmState=%d cbData=%#x\n", pThis->enmState, pUrb->cbData));
887	return usbHidCompleteStall(pThis, NULL, pUrb, "Really bad state (D2H)!");
888	}
889	}
890
891
892	/**
893	* Handles request sent to the default control pipe.
894	*/
895	static int usbHidHandleDefaultPipe(PUSBHID pThis, PUSBHIDEP pEp, PVUSBURB pUrb)
896	{
897	PVUSBSETUP pSetup = (PVUSBSETUP)&pUrb->abData[0];
898	LogFlow(("usbHidHandleDefaultPipe: cbData=%d\n", pUrb->cbData));
899
900	AssertReturn(pUrb->cbData >= sizeof(*pSetup), VERR_VUSB_FAILED_TO_QUEUE_URB);
901
902	if ((pSetup->bmRequestType & VUSB_REQ_MASK) == VUSB_REQ_STANDARD)
903	{
904	switch (pSetup->bRequest)
905	{
906	case VUSB_REQ_GET_DESCRIPTOR:
907	{
908	switch (pSetup->bmRequestType)
909	{
910	case VUSB_TO_DEVICE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
911	{
912	switch (pSetup->wValue >> 8)
913	{
914	case VUSB_DT_STRING:
915	Log(("usbHid: GET_DESCRIPTOR DT_STRING wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
916	break;
917	default:
918	Log(("usbHid: GET_DESCRIPTOR, huh? wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
919	break;
920	}
921	break;
922	}
923
924	case VUSB_TO_INTERFACE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
925	{
926	switch (pSetup->wValue >> 8)
927	{
928	case DT_IF_HID_DESCRIPTOR:
929	{
930	uint32_t cbCopy;
931
932	/* Returned data is written after the setup message. */
933	cbCopy = pUrb->cbData - sizeof(*pSetup);
934	cbCopy = RT_MIN(cbCopy, sizeof(g_UsbHidIfHidDesc));
935	Log(("usbHidKbd: GET_DESCRIPTOR DT_IF_HID_DESCRIPTOR wValue=%#x wIndex=%#x cbCopy=%#x\n", pSetup->wValue, pSetup->wIndex, cbCopy));
936	memcpy(&pUrb->abData[sizeof(*pSetup)], &g_UsbHidIfHidDesc, cbCopy);
937	return usbHidCompleteOk(pThis, pUrb, cbCopy + sizeof(*pSetup));
938	}
939
940	case DT_IF_HID_REPORT:
941	{
942	uint32_t cbCopy;
943
944	/* Returned data is written after the setup message. */
945	cbCopy = pUrb->cbData - sizeof(*pSetup);
946	cbCopy = RT_MIN(cbCopy, sizeof(g_UsbHidReportDesc));
947	Log(("usbHid: GET_DESCRIPTOR DT_IF_HID_REPORT wValue=%#x wIndex=%#x cbCopy=%#x\n", pSetup->wValue, pSetup->wIndex, cbCopy));
948	memcpy(&pUrb->abData[sizeof(*pSetup)], &g_UsbHidReportDesc, cbCopy);
949	return usbHidCompleteOk(pThis, pUrb, cbCopy + sizeof(*pSetup));
950	}
951
952	default:
953	Log(("usbHid: GET_DESCRIPTOR, huh? wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
954	break;
955	}
956	break;
957	}
958
959	default:
960	Log(("usbHid: Bad GET_DESCRIPTOR req: bmRequestType=%#x\n", pSetup->bmRequestType));
961	return usbHidCompleteStall(pThis, pEp, pUrb, "Bad GET_DESCRIPTOR");
962	}
963	break;
964	}
965
966	case VUSB_REQ_GET_STATUS:
967	{
968	uint16_t wRet = 0;
969
970	if (pSetup->wLength != 2)
971	{
972	Log(("usbHid: Bad GET_STATUS req: wLength=%#x\n", pSetup->wLength));
973	break;
974	}
975	Assert(pSetup->wValue == 0);
976	switch (pSetup->bmRequestType)
977	{
978	case VUSB_TO_DEVICE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
979	{
980	Assert(pSetup->wIndex == 0);
981	Log(("usbHid: GET_STATUS (device)\n"));
982	wRet = 0; /* Not self-powered, no remote wakeup. */
983	memcpy(&pUrb->abData[sizeof(*pSetup)], &wRet, sizeof(wRet));
984	return usbHidCompleteOk(pThis, pUrb, sizeof(wRet) + sizeof(*pSetup));
985	}
986
987	case VUSB_TO_INTERFACE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
988	{
989	if (pSetup->wIndex == 0)
990	{
991	memcpy(&pUrb->abData[sizeof(*pSetup)], &wRet, sizeof(wRet));
992	return usbHidCompleteOk(pThis, pUrb, sizeof(wRet) + sizeof(*pSetup));
993	}
994	else
995	{
996	Log(("usbHid: GET_STATUS (interface) invalid, wIndex=%#x\n", pSetup->wIndex));
997	}
998	break;
999	}
1000
1001	case VUSB_TO_ENDPOINT \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
1002	{
1003	if (pSetup->wIndex < RT_ELEMENTS(pThis->aEps))
1004	{
1005	wRet = pThis->aEps[pSetup->wIndex].fHalted ? 1 : 0;
1006	memcpy(&pUrb->abData[sizeof(*pSetup)], &wRet, sizeof(wRet));
1007	return usbHidCompleteOk(pThis, pUrb, sizeof(wRet) + sizeof(*pSetup));
1008	}
1009	else
1010	{
1011	Log(("usbHid: GET_STATUS (endpoint) invalid, wIndex=%#x\n", pSetup->wIndex));
1012	}
1013	break;
1014	}
1015
1016	default:
1017	Log(("usbHid: Bad GET_STATUS req: bmRequestType=%#x\n", pSetup->bmRequestType));
1018	return usbHidCompleteStall(pThis, pEp, pUrb, "Bad GET_STATUS");
1019	}
1020	break;
1021	}
1022
1023	case VUSB_REQ_CLEAR_FEATURE:
1024	break;
1025	}
1026
1027	/** @todo implement this. */
1028	Log(("usbHid: Implement standard request: bmRequestType=%#x bRequest=%#x wValue=%#x wIndex=%#x wLength=%#x\n",
1029	pSetup->bmRequestType, pSetup->bRequest, pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1030
1031	usbHidCompleteStall(pThis, pEp, pUrb, "TODO: standard request stuff");
1032	}
1033	else if ((pSetup->bmRequestType & VUSB_REQ_MASK) == VUSB_REQ_CLASS)
1034	{
1035	switch (pSetup->bRequest)
1036	{
1037	case HID_REQ_SET_IDLE:
1038	{
1039	switch (pSetup->bmRequestType)
1040	{
1041	case VUSB_TO_INTERFACE \| VUSB_REQ_CLASS \| VUSB_DIR_TO_DEVICE:
1042	{
1043	Log(("usbHid: SET_IDLE wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
1044	pThis->bIdle = pSetup->wValue >> 8;
1045	/* Consider 24ms to mean zero for keyboards (see IOUSBHIDDriver) */
1046	if (pThis->bIdle == 6) pThis->bIdle = 0;
1047	return usbHidCompleteOk(pThis, pUrb, 0);
1048	}
1049	break;
1050	}
1051	break;
1052	}
1053	case HID_REQ_GET_IDLE:
1054	{
1055	switch (pSetup->bmRequestType)
1056	{
1057	case VUSB_TO_INTERFACE \| VUSB_REQ_CLASS \| VUSB_DIR_TO_HOST:
1058	{
1059	Log(("usbHid: GET_IDLE wValue=%#x wIndex=%#x, returning %#x\n", pSetup->wValue, pSetup->wIndex, pThis->bIdle));
1060	pUrb->abData[sizeof(*pSetup)] = pThis->bIdle;
1061	return usbHidCompleteOk(pThis, pUrb, 1);
1062	}
1063	break;
1064	}
1065	break;
1066	}
1067	case HID_REQ_SET_REPORT:
1068	{
1069	switch (pSetup->bmRequestType)
1070	{
1071	case VUSB_TO_INTERFACE \| VUSB_REQ_CLASS \| VUSB_DIR_TO_DEVICE:
1072	{
1073	Log(("usbHid: SET_REPORT wValue=%#x wIndex=%#x wLength=%#x\n", pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1074	usbHidSetReport(pThis, pUrb);
1075	return usbHidCompleteOk(pThis, pUrb, 0);
1076	}
1077	break;
1078	}
1079	break;
1080	}
1081	}
1082	Log(("usbHid: Unimplemented class request: bmRequestType=%#x bRequest=%#x wValue=%#x wIndex=%#x wLength=%#x\n",
1083	pSetup->bmRequestType, pSetup->bRequest, pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1084
1085	usbHidCompleteStall(pThis, pEp, pUrb, "TODO: class request stuff");
1086	}
1087	else
1088	{
1089	Log(("usbHid: Unknown control msg: bmRequestType=%#x bRequest=%#x wValue=%#x wIndex=%#x wLength=%#x\n",
1090	pSetup->bmRequestType, pSetup->bRequest, pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1091	return usbHidCompleteStall(pThis, pEp, pUrb, "Unknown control msg");
1092	}
1093
1094	return VINF_SUCCESS;
1095	}
1096
1097
1098	/**
1099	* @interface_method_impl{PDMUSBREG,pfnUrbQueue}
1100	*/
1101	static DECLCALLBACK(int) usbHidQueue(PPDMUSBINS pUsbIns, PVUSBURB pUrb)
1102	{
1103	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1104	LogFlow(("usbHidQueue/#%u: pUrb=%p:%s EndPt=%#x\n", pUsbIns->iInstance, pUrb, pUrb->pszDesc, pUrb->EndPt));
1105	RTCritSectEnter(&pThis->CritSect);
1106
1107	/*
1108	* Parse on a per end-point basis.
1109	*/
1110	int rc;
1111	switch (pUrb->EndPt)
1112	{
1113	case 0:
1114	rc = usbHidHandleDefaultPipe(pThis, &pThis->aEps[0], pUrb);
1115	break;
1116
1117	case 0x81:
1118	AssertFailed();
1119	/* fall thru */
1120	case 0x01:
1121	rc = usbHidHandleIntrDevToHost(pThis, &pThis->aEps[1], pUrb);
1122	break;
1123
1124	default:
1125	AssertMsgFailed(("EndPt=%d\n", pUrb->EndPt));
1126	rc = VERR_VUSB_FAILED_TO_QUEUE_URB;
1127	break;
1128	}
1129
1130	RTCritSectLeave(&pThis->CritSect);
1131	return rc;
1132	}
1133
1134
1135	/**
1136	* @interface_method_impl{PDMUSBREG,pfnUsbClearHaltedEndpoint}
1137	*/
1138	static DECLCALLBACK(int) usbHidUsbClearHaltedEndpoint(PPDMUSBINS pUsbIns, unsigned uEndpoint)
1139	{
1140	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1141	LogFlow(("usbHidUsbClearHaltedEndpoint/#%u: uEndpoint=%#x\n", pUsbIns->iInstance, uEndpoint));
1142
1143	if ((uEndpoint & ~0x80) < RT_ELEMENTS(pThis->aEps))
1144	{
1145	RTCritSectEnter(&pThis->CritSect);
1146	pThis->aEps[(uEndpoint & ~0x80)].fHalted = false;
1147	RTCritSectLeave(&pThis->CritSect);
1148	}
1149
1150	return VINF_SUCCESS;
1151	}
1152
1153
1154	/**
1155	* @interface_method_impl{PDMUSBREG,pfnUsbSetInterface}
1156	*/
1157	static DECLCALLBACK(int) usbHidUsbSetInterface(PPDMUSBINS pUsbIns, uint8_t bInterfaceNumber, uint8_t bAlternateSetting)
1158	{
1159	RT_NOREF3(pUsbIns, bInterfaceNumber, bAlternateSetting);
1160	LogFlow(("usbHidUsbSetInterface/#%u: bInterfaceNumber=%u bAlternateSetting=%u\n", pUsbIns->iInstance, bInterfaceNumber, bAlternateSetting));
1161	Assert(bAlternateSetting == 0);
1162	return VINF_SUCCESS;
1163	}
1164
1165
1166	/**
1167	* @interface_method_impl{PDMUSBREG,pfnUsbSetConfiguration}
1168	*/
1169	static DECLCALLBACK(int) usbHidUsbSetConfiguration(PPDMUSBINS pUsbIns, uint8_t bConfigurationValue,
1170	const void pvOldCfgDesc, const void pvOldIfState, const void *pvNewCfgDesc)
1171	{
1172	RT_NOREF3(pvOldCfgDesc, pvOldIfState, pvNewCfgDesc);
1173	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1174	LogFlow(("usbHidUsbSetConfiguration/#%u: bConfigurationValue=%u\n", pUsbIns->iInstance, bConfigurationValue));
1175	Assert(bConfigurationValue == 1);
1176	RTCritSectEnter(&pThis->CritSect);
1177
1178	/*
1179	* If the same config is applied more than once, it's a kind of reset.
1180	*/
1181	if (pThis->bConfigurationValue == bConfigurationValue)
1182	usbHidResetWorker(pThis, NULL, true /fSetConfig/); /** @todo figure out the exact difference */
1183	pThis->bConfigurationValue = bConfigurationValue;
1184
1185	/*
1186	* Tell the other end that the keyboard is now enabled and wants
1187	* to receive keystrokes.
1188	*/
1189	pThis->Lun0.pDrv->pfnSetActive(pThis->Lun0.pDrv, true);
1190
1191	RTCritSectLeave(&pThis->CritSect);
1192	return VINF_SUCCESS;
1193	}
1194
1195
1196	/**
1197	* @interface_method_impl{PDMUSBREG,pfnUsbGetDescriptorCache}
1198	*/
1199	static DECLCALLBACK(PCPDMUSBDESCCACHE) usbHidUsbGetDescriptorCache(PPDMUSBINS pUsbIns)
1200	{
1201	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID); RT_NOREF_PV(pThis);
1202	LogFlow(("usbHidUsbGetDescriptorCache/#%u:\n", pUsbIns->iInstance));
1203	return &g_UsbHidDescCache;
1204	}
1205
1206
1207	/**
1208	* @interface_method_impl{PDMUSBREG,pfnUsbReset}
1209	*/
1210	static DECLCALLBACK(int) usbHidUsbReset(PPDMUSBINS pUsbIns, bool fResetOnLinux)
1211	{
1212	RT_NOREF1(fResetOnLinux);
1213	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1214	LogFlow(("usbHidUsbReset/#%u:\n", pUsbIns->iInstance));
1215	RTCritSectEnter(&pThis->CritSect);
1216
1217	int rc = usbHidResetWorker(pThis, NULL, false /fSetConfig/);
1218
1219	RTCritSectLeave(&pThis->CritSect);
1220	return rc;
1221	}
1222
1223
1224	/**
1225	* @interface_method_impl{PDMUSBREG,pfnDestruct}
1226	*/
1227	static DECLCALLBACK(void) usbHidDestruct(PPDMUSBINS pUsbIns)
1228	{
1229	PDMUSB_CHECK_VERSIONS_RETURN_VOID(pUsbIns);
1230	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1231	LogFlow(("usbHidDestruct/#%u:\n", pUsbIns->iInstance));
1232
1233	if (RTCritSectIsInitialized(&pThis->CritSect))
1234	{
1235	/* Let whoever runs in this critical section complete. */
1236	RTCritSectEnter(&pThis->CritSect);
1237	RTCritSectLeave(&pThis->CritSect);
1238	RTCritSectDelete(&pThis->CritSect);
1239	}
1240
1241	if (pThis->hEvtDoneQueue != NIL_RTSEMEVENT)
1242	{
1243	RTSemEventDestroy(pThis->hEvtDoneQueue);
1244	pThis->hEvtDoneQueue = NIL_RTSEMEVENT;
1245	}
1246	}
1247
1248
1249	/**
1250	* @interface_method_impl{PDMUSBREG,pfnConstruct}
1251	*/
1252	static DECLCALLBACK(int) usbHidConstruct(PPDMUSBINS pUsbIns, int iInstance, PCFGMNODE pCfg, PCFGMNODE pCfgGlobal)
1253	{
1254	RT_NOREF1(pCfgGlobal);
1255	PDMUSB_CHECK_VERSIONS_RETURN(pUsbIns);
1256	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1257	Log(("usbHidConstruct/#%u:\n", iInstance));
1258
1259	/*
1260	* Perform the basic structure initialization first so the destructor
1261	* will not misbehave.
1262	*/
1263	pThis->pUsbIns = pUsbIns;
1264	pThis->hEvtDoneQueue = NIL_RTSEMEVENT;
1265	usbHidQueueInit(&pThis->ToHostQueue);
1266	usbHidQueueInit(&pThis->DoneQueue);
1267
1268	int rc = RTCritSectInit(&pThis->CritSect);
1269	AssertRCReturn(rc, rc);
1270
1271	rc = RTSemEventCreate(&pThis->hEvtDoneQueue);
1272	AssertRCReturn(rc, rc);
1273
1274	/*
1275	* Validate and read the configuration.
1276	*/
1277	rc = CFGMR3ValidateConfig(pCfg, "/", "", "", "UsbHid", iInstance);
1278	if (RT_FAILURE(rc))
1279	return rc;
1280
1281	pThis->Lun0.IBase.pfnQueryInterface = usbHidKeyboardQueryInterface;
1282	pThis->Lun0.IPort.pfnPutEventHid = usbHidKeyboardPutEvent;
1283
1284	/*
1285	* Attach the keyboard driver.
1286	*/
1287	rc = PDMUsbHlpDriverAttach(pUsbIns, 0 /iLun/, &pThis->Lun0.IBase, &pThis->Lun0.pDrvBase, "Keyboard Port");
1288	if (RT_FAILURE(rc))
1289	return PDMUsbHlpVMSetError(pUsbIns, rc, RT_SRC_POS, N_("HID failed to attach keyboard driver"));
1290
1291	pThis->Lun0.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Lun0.pDrvBase, PDMIKEYBOARDCONNECTOR);
1292	if (!pThis->Lun0.pDrv)
1293	return PDMUsbHlpVMSetError(pUsbIns, VERR_PDM_MISSING_INTERFACE, RT_SRC_POS, N_("HID failed to query keyboard interface"));
1294
1295	return VINF_SUCCESS;
1296	}
1297
1298
1299	/**
1300	* The USB Human Interface Device (HID) Keyboard registration record.
1301	*/
1302	const PDMUSBREG g_UsbHidKbd =
1303	{
1304	/* u32Version */
1305	PDM_USBREG_VERSION,
1306	/* szName */
1307	"HidKeyboard",
1308	/* pszDescription */
1309	"USB HID Keyboard.",
1310	/* fFlags */
1311	0,
1312	/* cMaxInstances */
1313	~0U,
1314	/* cbInstance */
1315	sizeof(USBHID),
1316	/* pfnConstruct */
1317	usbHidConstruct,
1318	/* pfnDestruct */
1319	usbHidDestruct,
1320	/* pfnVMInitComplete */
1321	NULL,
1322	/* pfnVMPowerOn */
1323	NULL,
1324	/* pfnVMReset */
1325	NULL,
1326	/* pfnVMSuspend */
1327	NULL,
1328	/* pfnVMResume */
1329	NULL,
1330	/* pfnVMPowerOff */
1331	NULL,
1332	/* pfnHotPlugged */
1333	NULL,
1334	/* pfnHotUnplugged */
1335	NULL,
1336	/* pfnDriverAttach */
1337	NULL,
1338	/* pfnDriverDetach */
1339	NULL,
1340	/* pfnQueryInterface */
1341	NULL,
1342	/* pfnUsbReset */
1343	usbHidUsbReset,
1344	/* pfnUsbGetDescriptorCache */
1345	usbHidUsbGetDescriptorCache,
1346	/* pfnUsbSetConfiguration */
1347	usbHidUsbSetConfiguration,
1348	/* pfnUsbSetInterface */
1349	usbHidUsbSetInterface,
1350	/* pfnUsbClearHaltedEndpoint */
1351	usbHidUsbClearHaltedEndpoint,
1352	/* pfnUrbNew */
1353	NULL/usbHidUrbNew/,
1354	/* pfnUrbQueue */
1355	usbHidQueue,
1356	/* pfnUrbCancel */
1357	usbHidUrbCancel,
1358	/* pfnUrbReap */
1359	usbHidUrbReap,
1360	/* pfnWakeup */
1361	usbHidWakeup,
1362	/* u32TheEnd */
1363	PDM_USBREG_VERSION
1364	};

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Input/UsbKbd.cpp@ 68080

Download in other formats: