UsbKbd.cpp@ 98410

Last change on this file since 98410 was 98103, checked in by vboxsync, 23 months ago
Copyright year updates by scm.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 65.2 KB

Line
1	/* $Id: UsbKbd.cpp 98103 2023-01-17 14:15:46Z vboxsync $ */
2	/** @file
3	* UsbKbd - USB Human Interface Device Emulation, Keyboard.
4	*/
5
6	/*
7	* Copyright (C) 2007-2023 Oracle and/or its affiliates.
8	*
9	* This file is part of VirtualBox base platform packages, as
10	* available from https://www.virtualbox.org.
11	*
12	* This program is free software; you can redistribute it and/or
13	* modify it under the terms of the GNU General Public License
14	* as published by the Free Software Foundation, in version 3 of the
15	* License.
16	*
17	* This program is distributed in the hope that it will be useful, but
18	* WITHOUT ANY WARRANTY; without even the implied warranty of
19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
20	* General Public License for more details.
21	*
22	* You should have received a copy of the GNU General Public License
23	* along with this program; if not, see <https://www.gnu.org/licenses>.
24	*
25	* SPDX-License-Identifier: GPL-3.0-only
26	*/
27
28	/** @page pg_usb_kbd USB Keyboard Device Emulation.
29	*
30	* This module implements a standard USB keyboard which uses the boot
31	* interface. The keyboard sends reports which have room for up to six
32	* normal keys and all standard modifier keys. A report always reflects the
33	* current state of the keyboard and indicates which keys are held down.
34	*
35	* Software normally utilizes the keyboard's interrupt endpoint to request
36	* reports to be sent whenever a state change occurs. However, reports can
37	* also be sent whenever an interrupt transfer is initiated (the keyboard is
38	* not "idle") or requested via the control endpoint (polling).
39	*
40	* Because turnaround on USB is relatively slow, the keyboard often ends up
41	* in a situation where new input arrived but there is no URB available
42	* where a report could be written to. The PDM queue maintained by the
43	* keyboard driver is utilized to provide buffering and hold incoming events
44	* until they can be passed along. The USB keyboard can effectively buffer
45	* up to one event.
46	*
47	* If there is a pending event and a new URB becomes available, a report is
48	* built and the keyboard queue is flushed. This ensures that queued events
49	* are processed as quickly as possible.
50	*
51	* A second interface with its own interrupt endpoint is used to deliver
52	* additional key events for media and system control keys. This adds
53	* considerable complexity to the emulated device, but unfortunately the
54	* keyboard boot interface is fixed and fairly limited.
55	*
56	* The second interface is only exposed if the device is configured in
57	* "extended" mode, with a different USB product ID and different
58	* descriptors. The "basic" mode should be indistinguishable from the original
59	* implementation.
60	*
61	* There are various options available for reporting media keys. We chose
62	* a very basic approach which reports system control keys as a bit-field
63	* (since there are only 3 keys defined) and consumer control keys as just
64	* a single 16-bit value.
65	*
66	* As a consequence, only one consumer control key can be reported as
67	* pressed at any one time. While this may seem limiting, the usefulness of
68	* being able to report e.g. volume-up at the same time as volume-down or
69	* mute is highly questionable.
70	*
71	* System control and consumer control keys are reported in a single
72	* 4-byte report in order to avoid sending multiple separate report types.
73	*
74	* There is a slight complication in that both interfaces are configured
75	* together, but a guest does not necessarily "listen" on both (e.g. EFI).
76	* Since all events come through a single queue, we can't just push back
77	* events for the secondary interface because the entire keyboard would be
78	* blocked. After the device is reset/configured, we drop any events destined
79	* for the secondary interface until a URB is actually queued on the second
80	* interrupt endpoint. Once that happens, we assume the guest will be
81	* receiving data on the second endpoint until the next reset/reconfig.
82	*
83	* References:
84	*
85	* Device Class Definition for Human Interface Devices (HID), Version 1.11
86	*
87	*/
88
89
90	/*********************************************************************************************************************************
91	* Header Files *
92	*********************************************************************************************************************************/
93	#define LOG_GROUP LOG_GROUP_USB_KBD
94	#include <VBox/vmm/pdmusb.h>
95	#include <VBox/log.h>
96	#include <VBox/err.h>
97	#include <iprt/assert.h>
98	#include <iprt/critsect.h>
99	#include <iprt/mem.h>
100	#include <iprt/semaphore.h>
101	#include <iprt/string.h>
102	#include <iprt/uuid.h>
103	#include "VBoxDD.h"
104
105
106	/*********************************************************************************************************************************
107	* Defined Constants And Macros *
108	*********************************************************************************************************************************/
109	/** @name USB HID string IDs
110	* @{ */
111	#define USBHID_STR_ID_MANUFACTURER 1
112	#define USBHID_STR_ID_PRODUCT 2
113	#define USBHID_STR_ID_IF_KBD 3
114	#define USBHID_STR_ID_IF_EXT 4
115	/** @} */
116
117	/** @name USB HID specific descriptor types
118	* @{ */
119	#define DT_IF_HID_DESCRIPTOR 0x21
120	#define DT_IF_HID_REPORT 0x22
121	/** @} */
122
123	/** @name USB HID vendor and product IDs
124	* @{ */
125	#define VBOX_USB_VENDOR 0x80EE
126	#define USBHID_PID_BAS_KEYBOARD 0x0010
127	#define USBHID_PID_EXT_KEYBOARD 0x0011
128	/** @} */
129
130	/** @name USB HID class specific requests
131	* @{ */
132	#define HID_REQ_GET_REPORT 0x01
133	#define HID_REQ_GET_IDLE 0x02
134	#define HID_REQ_SET_REPORT 0x09
135	#define HID_REQ_SET_IDLE 0x0A
136	/** @} */
137
138	/** @name USB HID additional constants
139	* @{ */
140	/** The highest USB usage code reported by the VBox emulated keyboard */
141	#define VBOX_USB_MAX_USAGE_CODE 0xE7
142	/** The size of an array needed to store all USB usage codes */
143	#define VBOX_USB_USAGE_ARRAY_SIZE (VBOX_USB_MAX_USAGE_CODE + 1)
144	#define USBHID_USAGE_ROLL_OVER 1
145	/** The usage code of the first modifier key. */
146	#define USBHID_MODIFIER_FIRST 0xE0
147	/** The usage code of the last modifier key. */
148	#define USBHID_MODIFIER_LAST 0xE7
149	/** @} */
150
151
152	/*********************************************************************************************************************************
153	* Structures and Typedefs *
154	*********************************************************************************************************************************/
155
156	/**
157	* The device mode.
158	*/
159	typedef enum USBKBDMODE
160	{
161	/** Basic keyboard only, backward compatible. */
162	USBKBDMODE_BASIC = 0,
163	/** Extended 2nd interface for consumer control and power. */
164	USBKBDMODE_EXTENDED,
165	} USBKBDMODE;
166
167
168	/**
169	* The USB HID request state.
170	*/
171	typedef enum USBHIDREQSTATE
172	{
173	/** Invalid status. */
174	USBHIDREQSTATE_INVALID = 0,
175	/** Ready to receive a new read request. */
176	USBHIDREQSTATE_READY,
177	/** Have (more) data for the host. */
178	USBHIDREQSTATE_DATA_TO_HOST,
179	/** Waiting to supply status information to the host. */
180	USBHIDREQSTATE_STATUS,
181	/** The end of the valid states. */
182	USBHIDREQSTATE_END
183	} USBHIDREQSTATE;
184
185
186	/**
187	* A URB queue.
188	*/
189	typedef struct USBHIDURBQUEUE
190	{
191	/** The head pointer. */
192	PVUSBURB pHead;
193	/** Where to insert the next entry. */
194	PVUSBURB *ppTail;
195	} USBHIDURBQUEUE;
196	/** Pointer to a URB queue. */
197	typedef USBHIDURBQUEUE *PUSBHIDURBQUEUE;
198	/** Pointer to a const URB queue. */
199	typedef USBHIDURBQUEUE const *PCUSBHIDURBQUEUE;
200
201
202	/**
203	* Endpoint state.
204	*/
205	typedef struct USBHIDEP
206	{
207	/** Endpoint halt flag.*/
208	bool fHalted;
209	} USBHIDEP;
210	/** Pointer to the endpoint status. */
211	typedef USBHIDEP *PUSBHIDEP;
212
213
214	/**
215	* Interface state.
216	*/
217	typedef struct USBHIDIF
218	{
219	/** If interface has pending changes. */
220	bool fHasPendingChanges;
221	/** The state of the HID (state machine).*/
222	USBHIDREQSTATE enmState;
223	/** Pending to-host queue.
224	* The URBs waiting here are waiting for data to become available.
225	*/
226	USBHIDURBQUEUE ToHostQueue;
227	} USBHIDIF;
228	/** Pointer to the endpoint status. */
229	typedef USBHIDIF *PUSBHIDIF;
230
231
232	/**
233	* The USB HID report structure for regular keys.
234	*/
235	typedef struct USBHIDK_REPORT
236	{
237	uint8_t ShiftState; /*< Modifier keys bitfield /
238	uint8_t Reserved; /*< Currently unused /
239	uint8_t aKeys[6]; /*< Normal keys /
240	} USBHIDK_REPORT, *PUSBHIDK_REPORT;
241
242	/* Must match 8-byte packet size. */
243	AssertCompile(sizeof(USBHIDK_REPORT) == 8);
244
245
246	/**
247	* The USB HID report structure for extra keys.
248	*/
249	typedef struct USBHIDX_REPORT
250	{
251	uint16_t uKeyCC; /*< Consumer Control key code /
252	uint8_t uSCKeys; /*< System Control keys bit map /
253	uint8_t Reserved; /*< Unused /
254	} USBHIDX_REPORT, *PUSBHIDX_REPORT;
255
256	/* Must match 4-byte packet size. */
257	AssertCompile(sizeof(USBHIDX_REPORT) == 4);
258
259
260	/**
261	* The USB HID instance data.
262	*/
263	typedef struct USBHID
264	{
265	/** Pointer back to the PDM USB Device instance structure. */
266	PPDMUSBINS pUsbIns;
267	/** Critical section protecting the device state. */
268	RTCRITSECT CritSect;
269
270	/** The current configuration.
271	* (0 - default, 1 - the one supported configuration, i.e configured.) */
272	uint8_t bConfigurationValue;
273	/** USB HID Idle value.
274	* (0 - only report state change, !=0 - report in bIdle * 4ms intervals.) */
275	uint8_t bIdle;
276	/** Is this a relative, absolute or multi-touch pointing device? */
277	USBKBDMODE enmMode;
278	/** Endpoint 0 is the default control pipe, 1 is the dev->host interrupt one
279	* for standard keys, 1 is the interrupt EP for extra keys. */
280	USBHIDEP aEps[3];
281	/** Interface 0 is the standard keyboard interface, 1 is the additional
282	* control/media key interface. */
283	USBHIDIF aIfs[2];
284
285	/** Done queue
286	* The URBs stashed here are waiting to be reaped. */
287	USBHIDURBQUEUE DoneQueue;
288	/** Signalled when adding an URB to the done queue and fHaveDoneQueueWaiter
289	* is set. */
290	RTSEMEVENT hEvtDoneQueue;
291	/** Someone is waiting on the done queue. */
292	bool fHaveDoneQueueWaiter;
293	/** The guest expects data coming over second endpoint/pipe. */
294	bool fExtPipeActive;
295	/** Currently depressed keys */
296	uint8_t abDepressedKeys[VBOX_USB_USAGE_ARRAY_SIZE];
297
298	/**
299	* Keyboard port - LUN#0.
300	*
301	* @implements PDMIBASE
302	* @implements PDMIKEYBOARDPORT
303	*/
304	struct
305	{
306	/** The base interface for the keyboard port. */
307	PDMIBASE IBase;
308	/** The keyboard port base interface. */
309	PDMIKEYBOARDPORT IPort;
310
311	/** The base interface of the attached keyboard driver. */
312	R3PTRTYPE(PPDMIBASE) pDrvBase;
313	/** The keyboard interface of the attached keyboard driver. */
314	R3PTRTYPE(PPDMIKEYBOARDCONNECTOR) pDrv;
315	} Lun0;
316	} USBHID;
317	/** Pointer to the USB HID instance data. */
318	typedef USBHID *PUSBHID;
319
320
321	/*********************************************************************************************************************************
322	* Global Variables *
323	*********************************************************************************************************************************/
324	static const PDMUSBDESCCACHESTRING g_aUsbHidStrings_en_US[] =
325	{
326	{ USBHID_STR_ID_MANUFACTURER, "VirtualBox" },
327	{ USBHID_STR_ID_PRODUCT, "USB Keyboard" },
328	{ USBHID_STR_ID_IF_KBD, "Keyboard" },
329	{ USBHID_STR_ID_IF_EXT, "System Control"},
330	};
331
332	static const PDMUSBDESCCACHELANG g_aUsbHidLanguages[] =
333	{
334	{ 0x0409, RT_ELEMENTS(g_aUsbHidStrings_en_US), g_aUsbHidStrings_en_US }
335	};
336
337	static const VUSBDESCENDPOINTEX g_aUsbHidEndpointDescsKbd[] =
338	{
339	{
340	{
341	/* .bLength = */ sizeof(VUSBDESCENDPOINT),
342	/* .bDescriptorType = */ VUSB_DT_ENDPOINT,
343	/* .bEndpointAddress = / 0x81 / ep=1, in */,
344	/* .bmAttributes = / 3 / interrupt */,
345	/* .wMaxPacketSize = */ 8,
346	/* .bInterval = */ 10,
347	},
348	/* .pvMore = */ NULL,
349	/* .pvClass = */ NULL,
350	/* .cbClass = */ 0
351	},
352	};
353
354	static const VUSBDESCENDPOINTEX g_aUsbHidEndpointDescsExt[] =
355	{
356	{
357	{
358	/* .bLength = */ sizeof(VUSBDESCENDPOINT),
359	/* .bDescriptorType = */ VUSB_DT_ENDPOINT,
360	/* .bEndpointAddress = / 0x82 / ep=2, in */,
361	/* .bmAttributes = / 3 / interrupt */,
362	/* .wMaxPacketSize = */ 4,
363	/* .bInterval = */ 10,
364	},
365	/* .pvMore = */ NULL,
366	/* .pvClass = */ NULL,
367	/* .cbClass = */ 0
368	},
369	};
370
371	/** HID report descriptor for standard keys. */
372	static const uint8_t g_UsbHidReportDescKbd[] =
373	{
374	/* Usage Page / 0x05, 0x01, / Generic Desktop */
375	/* Usage / 0x09, 0x06, / Keyboard */
376	/* Collection / 0xA1, 0x01, / Application */
377	/* Usage Page / 0x05, 0x07, / Keyboard */
378	/* Usage Minimum / 0x19, 0xE0, / Left Ctrl Key */
379	/* Usage Maximum / 0x29, 0xE7, / Right GUI Key */
380	/* Logical Minimum / 0x15, 0x00, / 0 */
381	/* Logical Maximum / 0x25, 0x01, / 1 */
382	/* Report Count / 0x95, 0x08, / 8 */
383	/* Report Size / 0x75, 0x01, / 1 */
384	/* Input / 0x81, 0x02, / Data, Value, Absolute, Bit field */
385	/* Report Count / 0x95, 0x01, / 1 */
386	/* Report Size / 0x75, 0x08, / 8 (padding bits) */
387	/* Input / 0x81, 0x01, / Constant, Array, Absolute, Bit field */
388	/* Report Count / 0x95, 0x05, / 5 */
389	/* Report Size / 0x75, 0x01, / 1 */
390	/* Usage Page / 0x05, 0x08, / LEDs */
391	/* Usage Minimum / 0x19, 0x01, / Num Lock */
392	/* Usage Maximum / 0x29, 0x05, / Kana */
393	/* Output / 0x91, 0x02, / Data, Value, Absolute, Non-volatile, Bit field */
394	/* Report Count / 0x95, 0x01, / 1 */
395	/* Report Size / 0x75, 0x03, / 3 */
396	/* Output / 0x91, 0x01, / Constant, Value, Absolute, Non-volatile, Bit field */
397	/* Report Count / 0x95, 0x06, / 6 */
398	/* Report Size / 0x75, 0x08, / 8 */
399	/* Logical Minimum / 0x15, 0x00, / 0 */
400	/* Logical Maximum / 0x26, 0xFF,0x00,/ 255 */
401	/* Usage Page / 0x05, 0x07, / Keyboard */
402	/* Usage Minimum / 0x19, 0x00, / 0 */
403	/* Usage Maximum / 0x29, 0xFF, / 255 */
404	/* Input / 0x81, 0x00, / Data, Array, Absolute, Bit field */
405	/* End Collection */ 0xC0,
406	};
407
408	/** HID report descriptor for extra multimedia/system keys. */
409	static const uint8_t g_UsbHidReportDescExt[] =
410	{
411	/* Usage Page / 0x05, 0x0C, / Consumer */
412	/* Usage / 0x09, 0x01, / Consumer Control */
413	/* Collection / 0xA1, 0x01, / Application */
414
415	/* Usage Page / 0x05, 0x0C, / Consumer */
416	/* Usage Minimum / 0x19, 0x00, / 0 */
417	/* Usage Maximum / 0x2A, 0x3C, 0x02, / 572 */
418	/* Logical Minimum / 0x15, 0x00, / 0 */
419	/* Logical Maximum / 0x26, 0x3C, 0x02, / 572 */
420	/* Report Count / 0x95, 0x01, / 1 */
421	/* Report Size / 0x75, 0x10, / 16 */
422	/* Input / 0x81, 0x80, / Data, Array, Absolute, Bytes */
423
424	/* Usage Page / 0x05, 0x01, / Generic Desktop */
425	/* Usage Minimum / 0x19, 0x81, / 129 */
426	/* Usage Maximum / 0x29, 0x83, / 131 */
427	/* Logical Minimum / 0x15, 0x00, / 0 */
428	/* Logical Maximum / 0x25, 0x01, / 1 */
429	/* Report Size / 0x75, 0x01, / 1 */
430	/* Report Count / 0x95, 0x03, / 3 */
431	/* Input / 0x81, 0x02, / Data, Value, Absolute, Bit field */
432	/* Report Count / 0x95, 0x05, / 5 */
433	/* Input / 0x81, 0x01, / Constant, Array, Absolute, Bit field */
434	/* Report Count / 0x95, 0x01, / 1 */
435	/* Report Size / 0x75, 0x08, / 8 (padding bits) */
436	/* Input / 0x81, 0x01, / Constant, Array, Absolute, Bit field */
437
438	/* End Collection */ 0xC0,
439	};
440
441	/** Additional HID class interface descriptor for standard keys. */
442	static const uint8_t g_UsbHidIfHidDescKbd[] =
443	{
444	/* .bLength = */ 0x09,
445	/* .bDescriptorType = / 0x21, / HID */
446	/* .bcdHID = / 0x10, 0x01, / 1.1 */
447	/* .bCountryCode = / 0x0D, / International (ISO) */
448	/* .bNumDescriptors = */ 1,
449	/* .bDescriptorType = / 0x22, / Report */
450	/* .wDescriptorLength = */ sizeof(g_UsbHidReportDescKbd), 0x00
451	};
452
453	/** Additional HID class interface descriptor for extra keys. */
454	static const uint8_t g_UsbHidIfHidDescExt[] =
455	{
456	/* .bLength = */ 0x09,
457	/* .bDescriptorType = / 0x21, / HID */
458	/* .bcdHID = / 0x10, 0x01, / 1.1 */
459	/* .bCountryCode = */ 0,
460	/* .bNumDescriptors = */ 1,
461	/* .bDescriptorType = / 0x22, / Report */
462	/* .wDescriptorLength = */ sizeof(g_UsbHidReportDescExt), 0x00
463	};
464
465	/** Standard keyboard interface. */
466	static const VUSBDESCINTERFACEEX g_UsbHidInterfaceDescKbd =
467	{
468	{
469	/* .bLength = */ sizeof(VUSBDESCINTERFACE),
470	/* .bDescriptorType = */ VUSB_DT_INTERFACE,
471	/* .bInterfaceNumber = */ 0,
472	/* .bAlternateSetting = */ 0,
473	/* .bNumEndpoints = */ 1,
474	/* .bInterfaceClass = / 3 / HID */,
475	/* .bInterfaceSubClass = / 1 / Boot Interface */,
476	/* .bInterfaceProtocol = / 1 / Keyboard */,
477	/* .iInterface = */ USBHID_STR_ID_IF_KBD
478	},
479	/* .pvMore = */ NULL,
480	/* .pvClass = */ &g_UsbHidIfHidDescKbd,
481	/* .cbClass = */ sizeof(g_UsbHidIfHidDescKbd),
482	&g_aUsbHidEndpointDescsKbd[0],
483	/* .pIAD = */ NULL,
484	/* .cbIAD = */ 0
485	};
486
487	/** Extra keys (multimedia/system) interface. */
488	static const VUSBDESCINTERFACEEX g_UsbHidInterfaceDescExt =
489	{
490	{
491	/* .bLength = */ sizeof(VUSBDESCINTERFACE),
492	/* .bDescriptorType = */ VUSB_DT_INTERFACE,
493	/* .bInterfaceNumber = */ 1,
494	/* .bAlternateSetting = */ 0,
495	/* .bNumEndpoints = */ 1,
496	/* .bInterfaceClass = / 3 / HID */,
497	/* .bInterfaceSubClass = / 0 / None */,
498	/* .bInterfaceProtocol = / 0 / Unspecified */,
499	/* .iInterface = */ USBHID_STR_ID_IF_EXT
500	},
501	/* .pvMore = */ NULL,
502	/* .pvClass = */ &g_UsbHidIfHidDescExt,
503	/* .cbClass = */ sizeof(g_UsbHidIfHidDescExt),
504	&g_aUsbHidEndpointDescsExt[0],
505	/* .pIAD = */ NULL,
506	/* .cbIAD = */ 0
507	};
508
509	static const VUSBINTERFACE g_aUsbHidBasInterfaces[] =
510	{
511	{ &g_UsbHidInterfaceDescKbd, /* .cSettings = */ 1 },
512	};
513
514	static const VUSBINTERFACE g_aUsbHidExtInterfaces[] =
515	{
516	{ &g_UsbHidInterfaceDescKbd, /* .cSettings = */ 1 },
517	{ &g_UsbHidInterfaceDescExt, /* .cSettings = */ 1 },
518	};
519
520	static const VUSBDESCCONFIGEX g_UsbHidBasConfigDesc =
521	{
522	{
523	/* .bLength = */ sizeof(VUSBDESCCONFIG),
524	/* .bDescriptorType = */ VUSB_DT_CONFIG,
525	/* .wTotalLength = / 0 / recalculated on read */,
526	/* .bNumInterfaces = */ RT_ELEMENTS(g_aUsbHidBasInterfaces),
527	/* .bConfigurationValue =*/ 1,
528	/* .iConfiguration = */ 0,
529	/* .bmAttributes = / RT_BIT(7), / bus-powered */
530	/* .MaxPower = / 50 / 100mA */
531	},
532	NULL, /* pvMore */
533	NULL, /* pvClass */
534	0, /* cbClass */
535	&g_aUsbHidBasInterfaces[0],
536	NULL /* pvOriginal */
537	};
538
539	static const VUSBDESCCONFIGEX g_UsbHidExtConfigDesc =
540	{
541	{
542	/* .bLength = */ sizeof(VUSBDESCCONFIG),
543	/* .bDescriptorType = */ VUSB_DT_CONFIG,
544	/* .wTotalLength = / 0 / recalculated on read */,
545	/* .bNumInterfaces = */ RT_ELEMENTS(g_aUsbHidExtInterfaces),
546	/* .bConfigurationValue =*/ 1,
547	/* .iConfiguration = */ 0,
548	/* .bmAttributes = / RT_BIT(7), / bus-powered */
549	/* .MaxPower = / 50 / 100mA */
550	},
551	NULL, /* pvMore */
552	NULL, /* pvClass */
553	0, /* cbClass */
554	&g_aUsbHidExtInterfaces[0],
555	NULL /* pvOriginal */
556	};
557
558	static const VUSBDESCDEVICE g_UsbHidBasDeviceDesc =
559	{
560	/* .bLength = */ sizeof(g_UsbHidBasDeviceDesc),
561	/* .bDescriptorType = */ VUSB_DT_DEVICE,
562	/* .bcdUsb = / 0x110, / 1.1 */
563	/* .bDeviceClass = / 0 / Class specified in the interface desc. */,
564	/* .bDeviceSubClass = / 0 / Subclass specified in the interface desc. */,
565	/* .bDeviceProtocol = / 0 / Protocol specified in the interface desc. */,
566	/* .bMaxPacketSize0 = */ 8,
567	/* .idVendor = */ VBOX_USB_VENDOR,
568	/* .idProduct = */ USBHID_PID_BAS_KEYBOARD,
569	/* .bcdDevice = / 0x0100, / 1.0 */
570	/* .iManufacturer = */ USBHID_STR_ID_MANUFACTURER,
571	/* .iProduct = */ USBHID_STR_ID_PRODUCT,
572	/* .iSerialNumber = */ 0,
573	/* .bNumConfigurations = */ 1
574	};
575
576	static const VUSBDESCDEVICE g_UsbHidExtDeviceDesc =
577	{
578	/* .bLength = */ sizeof(g_UsbHidExtDeviceDesc),
579	/* .bDescriptorType = */ VUSB_DT_DEVICE,
580	/* .bcdUsb = / 0x110, / 1.1 */
581	/* .bDeviceClass = / 0 / Class specified in the interface desc. */,
582	/* .bDeviceSubClass = / 0 / Subclass specified in the interface desc. */,
583	/* .bDeviceProtocol = / 0 / Protocol specified in the interface desc. */,
584	/* .bMaxPacketSize0 = */ 8,
585	/* .idVendor = */ VBOX_USB_VENDOR,
586	/* .idProduct = */ USBHID_PID_EXT_KEYBOARD,
587	/* .bcdDevice = / 0x0100, / 1.0 */
588	/* .iManufacturer = */ USBHID_STR_ID_MANUFACTURER,
589	/* .iProduct = */ USBHID_STR_ID_PRODUCT,
590	/* .iSerialNumber = */ 0,
591	/* .bNumConfigurations = */ 1
592	};
593
594	static const PDMUSBDESCCACHE g_UsbHidBasDescCache =
595	{
596	/* .pDevice = */ &g_UsbHidBasDeviceDesc,
597	/* .paConfigs = */ &g_UsbHidBasConfigDesc,
598	/* .paLanguages = */ g_aUsbHidLanguages,
599	/* .cLanguages = */ RT_ELEMENTS(g_aUsbHidLanguages),
600	/* .fUseCachedDescriptors = */ true,
601	/* .fUseCachedStringsDescriptors = */ true
602	};
603
604	static const PDMUSBDESCCACHE g_UsbHidExtDescCache =
605	{
606	/* .pDevice = */ &g_UsbHidExtDeviceDesc,
607	/* .paConfigs = */ &g_UsbHidExtConfigDesc,
608	/* .paLanguages = */ g_aUsbHidLanguages,
609	/* .cLanguages = */ RT_ELEMENTS(g_aUsbHidLanguages),
610	/* .fUseCachedDescriptors = */ true,
611	/* .fUseCachedStringsDescriptors = */ true
612	};
613
614	/**
615	* Conversion table for consumer control keys (HID Usage Page 12).
616	* Used to 'compress' the USB HID usage code into a single 8-bit
617	* value. See also PS2CCKeys in the PS/2 keyboard emulation.
618	*/
619	static const uint16_t aHidCCKeys[] = {
620	0x00B5, /* Scan Next Track */
621	0x00B6, /* Scan Previous Track */
622	0x00B7, /* Stop */
623	0x00CD, /* Play/Pause */
624	0x00E2, /* Mute */
625	0x00E5, /* Bass Boost */
626	0x00E7, /* Loudness */
627	0x00E9, /* Volume Up */
628	0x00EA, /* Volume Down */
629	0x0152, /* Bass Up */
630	0x0153, /* Bass Down */
631	0x0154, /* Treble Up */
632	0x0155, /* Treble Down */
633	0x0183, /* Media Select */
634	0x018A, /* Mail */
635	0x0192, /* Calculator */
636	0x0194, /* My Computer */
637	0x0221, /* WWW Search */
638	0x0223, /* WWW Home */
639	0x0224, /* WWW Back */
640	0x0225, /* WWW Forward */
641	0x0226, /* WWW Stop */
642	0x0227, /* WWW Refresh */
643	0x022A, /* WWW Favorites */
644	};
645
646	/**
647	* Conversion table for generic desktop control keys (HID Usage Page 1).
648	* Used to 'compress' the USB HID usage code into a single 8-bit
649	* value. See also PS2DCKeys in the PS/2 keyboard emulation.
650	*/
651	static const uint16_t aHidDCKeys[] = {
652	0x81, /* System Power */
653	0x82, /* System Sleep */
654	0x83, /* System Wake */
655	};
656
657	#define USBHID_PAGE_DC_START 0xb0
658	#define USBHID_PAGE_DC_END (USBHID_PAGE_DC_START + RT_ELEMENTS(aHidDCKeys))
659	#define USBHID_PAGE_CC_START 0xc0
660	#define USBHID_PAGE_CC_END (USBHID_PAGE_CC_START + RT_ELEMENTS(aHidCCKeys))
661
662	AssertCompile(RT_ELEMENTS(aHidCCKeys) <= 0x20); /* Must fit between 0xC0-0xDF. */
663	AssertCompile(RT_ELEMENTS(aHidDCKeys) <= 0x10); /* Must fit between 0xB0-0xBF. */
664
665
666	/*********************************************************************************************************************************
667	* Internal Functions *
668	*********************************************************************************************************************************/
669
670
671	/**
672	* Converts a 32-bit USB HID code to an internal 8-bit value.
673	*
674	* @returns 8-bit internal key code/index. -1 if not found.
675	* @param u32HidCode 32-bit USB HID code.
676	*/
677	static int usbHidToInternalCode(uint32_t u32HidCode)
678	{
679	uint8_t u8HidPage;
680	uint16_t u16HidUsage;
681	int iKeyIndex = -1;
682
683	u8HidPage = RT_LOBYTE(RT_HIWORD(u32HidCode));
684	u16HidUsage = RT_LOWORD(u32HidCode);
685
686	if (u8HidPage == USB_HID_KB_PAGE)
687	{
688	if (u16HidUsage <= VBOX_USB_MAX_USAGE_CODE)
689	iKeyIndex = u16HidUsage; /* Direct mapping. */
690	else
691	AssertMsgFailed(("u16HidUsage out of range! (%04X)\n", u16HidUsage));
692	}
693	else if (u8HidPage == USB_HID_CC_PAGE)
694	{
695	for (unsigned i = 0; i < RT_ELEMENTS(aHidCCKeys); ++i)
696	if (aHidCCKeys[i] == u16HidUsage)
697	{
698	iKeyIndex = USBHID_PAGE_CC_START + i;
699	break;
700	}
701	AssertMsg(iKeyIndex > -1, ("Unsupported code in USB_HID_CC_PAGE! (%04X)\n", u16HidUsage));
702	}
703	else if (u8HidPage == USB_HID_DC_PAGE)
704	{
705	for (unsigned i = 0; i < RT_ELEMENTS(aHidDCKeys); ++i)
706	if (aHidDCKeys[i] == u16HidUsage)
707	{
708	iKeyIndex = USBHID_PAGE_DC_START + i;
709	break;
710	}
711	AssertMsg(iKeyIndex > -1, ("Unsupported code in USB_HID_DC_PAGE! (%04X)\n", u16HidUsage));
712	}
713	else
714	{
715	AssertMsgFailed(("Unsupported u8HidPage! (%02X)\n", u8HidPage));
716	}
717
718	return iKeyIndex;
719	}
720
721
722	/**
723	* Converts an internal 8-bit key index back to a 32-bit USB HID code.
724	*
725	* @returns 32-bit USB HID code. Zero if not found.
726	* @param uKeyCode Internal key code/index.
727	*/
728	static uint32_t usbInternalCodeToHid(unsigned uKeyCode)
729	{
730	uint16_t u16HidUsage;
731	uint32_t u32HidCode = 0;
732
733	if ((uKeyCode >= USBHID_PAGE_DC_START) && (uKeyCode <= USBHID_PAGE_DC_END))
734	{
735	u16HidUsage = aHidDCKeys[uKeyCode - USBHID_PAGE_DC_START];
736	u32HidCode = RT_MAKE_U32(u16HidUsage, USB_HID_DC_PAGE);
737	}
738	else if ((uKeyCode >= USBHID_PAGE_CC_START) && (uKeyCode <= USBHID_PAGE_CC_END))
739	{
740	u16HidUsage = aHidCCKeys[uKeyCode - USBHID_PAGE_CC_START];
741	u32HidCode = RT_MAKE_U32(u16HidUsage, USB_HID_CC_PAGE);
742	}
743	else /* Must be the keyboard usage page. */
744	{
745	if (uKeyCode <= VBOX_USB_MAX_USAGE_CODE)
746	u32HidCode = RT_MAKE_U32(uKeyCode, USB_HID_KB_PAGE);
747	else
748	AssertMsgFailed(("uKeyCode out of range! (%u)\n", uKeyCode));
749	}
750
751	return u32HidCode;
752	}
753
754
755	/**
756	* Initializes an URB queue.
757	*
758	* @param pQueue The URB queue.
759	*/
760	static void usbHidQueueInit(PUSBHIDURBQUEUE pQueue)
761	{
762	pQueue->pHead = NULL;
763	pQueue->ppTail = &pQueue->pHead;
764	}
765
766	/**
767	* Inserts an URB at the end of the queue.
768	*
769	* @param pQueue The URB queue.
770	* @param pUrb The URB to insert.
771	*/
772	DECLINLINE(void) usbHidQueueAddTail(PUSBHIDURBQUEUE pQueue, PVUSBURB pUrb)
773	{
774	pUrb->Dev.pNext = NULL;
775	*pQueue->ppTail = pUrb;
776	pQueue->ppTail = &pUrb->Dev.pNext;
777	}
778
779
780	/**
781	* Unlinks the head of the queue and returns it.
782	*
783	* @returns The head entry.
784	* @param pQueue The URB queue.
785	*/
786	DECLINLINE(PVUSBURB) usbHidQueueRemoveHead(PUSBHIDURBQUEUE pQueue)
787	{
788	PVUSBURB pUrb = pQueue->pHead;
789	if (pUrb)
790	{
791	PVUSBURB pNext = pUrb->Dev.pNext;
792	pQueue->pHead = pNext;
793	if (!pNext)
794	pQueue->ppTail = &pQueue->pHead;
795	else
796	pUrb->Dev.pNext = NULL;
797	}
798	return pUrb;
799	}
800
801
802	/**
803	* Removes an URB from anywhere in the queue.
804	*
805	* @returns true if found, false if not.
806	* @param pQueue The URB queue.
807	* @param pUrb The URB to remove.
808	*/
809	DECLINLINE(bool) usbHidQueueRemove(PUSBHIDURBQUEUE pQueue, PVUSBURB pUrb)
810	{
811	PVUSBURB pCur = pQueue->pHead;
812	if (pCur == pUrb)
813	{
814	pQueue->pHead = pUrb->Dev.pNext;
815	if (!pUrb->Dev.pNext)
816	pQueue->ppTail = &pQueue->pHead;
817	}
818	else
819	{
820	while (pCur)
821	{
822	if (pCur->Dev.pNext == pUrb)
823	{
824	pCur->Dev.pNext = pUrb->Dev.pNext;
825	break;
826	}
827	pCur = pCur->Dev.pNext;
828	}
829	if (!pCur)
830	return false;
831	if (!pUrb->Dev.pNext)
832	pQueue->ppTail = &pCur->Dev.pNext;
833	}
834	pUrb->Dev.pNext = NULL;
835	return true;
836	}
837
838
839	#if 0 /* unused */
840	/**
841	* Checks if the queue is empty or not.
842	*
843	* @returns true if it is, false if it isn't.
844	* @param pQueue The URB queue.
845	*/
846	DECLINLINE(bool) usbHidQueueIsEmpty(PCUSBHIDURBQUEUE pQueue)
847	{
848	return pQueue->pHead == NULL;
849	}
850	#endif /* unused */
851
852
853	/**
854	* Links an URB into the done queue.
855	*
856	* @param pThis The HID instance.
857	* @param pUrb The URB.
858	*/
859	static void usbHidLinkDone(PUSBHID pThis, PVUSBURB pUrb)
860	{
861	usbHidQueueAddTail(&pThis->DoneQueue, pUrb);
862
863	if (pThis->fHaveDoneQueueWaiter)
864	{
865	int rc = RTSemEventSignal(pThis->hEvtDoneQueue);
866	AssertRC(rc);
867	}
868	}
869
870
871	/**
872	* Completes the URB with a stalled state, halting the pipe.
873	*/
874	static int usbHidCompleteStall(PUSBHID pThis, PUSBHIDEP pEp, PVUSBURB pUrb, const char *pszWhy)
875	{
876	RT_NOREF1(pszWhy);
877	Log(("usbHidCompleteStall/#%u: pUrb=%p:%s: %s\n", pThis->pUsbIns->iInstance, pUrb, pUrb->pszDesc, pszWhy));
878
879	pUrb->enmStatus = VUSBSTATUS_STALL;
880
881	/** @todo figure out if the stall is global or pipe-specific or both. */
882	if (pEp)
883	pEp->fHalted = true;
884	else
885	{
886	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aEps); i++)
887	pThis->aEps[i].fHalted = true;
888	}
889
890	usbHidLinkDone(pThis, pUrb);
891	return VINF_SUCCESS;
892	}
893
894
895	/**
896	* Completes the URB after device successfully processed it. Optionally copies data
897	* into the URB. May still generate an error if the URB is not big enough.
898	*/
899	static int usbHidCompleteOk(PUSBHID pThis, PVUSBURB pUrb, const void *pSrc, size_t cbSrc)
900	{
901	Log(("usbHidCompleteOk/#%u: pUrb=%p:%s (cbData=%#x) cbSrc=%#zx\n", pThis->pUsbIns->iInstance, pUrb, pUrb->pszDesc, pUrb->cbData, cbSrc));
902
903	pUrb->enmStatus = VUSBSTATUS_OK;
904	size_t cbCopy = 0;
905	size_t cbSetup = 0;
906
907	if (pSrc) /* Can be NULL if not copying anything. */
908	{
909	Assert(cbSrc);
910	uint8_t *pDst = pUrb->abData;
911
912	/* Returned data is written after the setup message in control URBs. */
913	if (pUrb->enmType == VUSBXFERTYPE_MSG)
914	cbSetup = sizeof(VUSBSETUP);
915
916	Assert(pUrb->cbData >= cbSetup); /* Only triggers if URB is corrupted. */
917
918	if (pUrb->cbData > cbSetup)
919	{
920	/* There is at least one byte of room in the URB. */
921	cbCopy = RT_MIN(pUrb->cbData - cbSetup, cbSrc);
922	memcpy(pDst + cbSetup, pSrc, cbCopy);
923	pUrb->cbData = (uint32_t)(cbCopy + cbSetup);
924	Log(("Copied %zu bytes to pUrb->abData[%zu], source had %zu bytes\n", cbCopy, cbSetup, cbSrc));
925	}
926
927	/* Need to check length differences. If cbSrc is less than what
928	* the URB has space for, it'll be resolved as a short packet. But
929	* if cbSrc is bigger, there is a real problem and the host needs
930	* to see an overrun/babble error.
931	*/
932	if (RT_UNLIKELY(cbSrc > cbCopy))
933	pUrb->enmStatus = VUSBSTATUS_DATA_OVERRUN;
934	}
935	else
936	Assert(cbSrc == 0); /* Make up your mind, caller! */
937
938	usbHidLinkDone(pThis, pUrb);
939	return VINF_SUCCESS;
940	}
941
942
943	/**
944	* Reset worker for usbHidUsbReset, usbHidUsbSetConfiguration and
945	* usbHidHandleDefaultPipe.
946	*
947	* @returns VBox status code.
948	* @param pThis The HID instance.
949	* @param pUrb Set when usbHidHandleDefaultPipe is the
950	* caller.
951	* @param fSetConfig Set when usbHidUsbSetConfiguration is the
952	* caller.
953	*/
954	static int usbHidResetWorker(PUSBHID pThis, PVUSBURB pUrb, bool fSetConfig)
955	{
956	/*
957	* Deactivate the keyboard.
958	*/
959	pThis->Lun0.pDrv->pfnSetActive(pThis->Lun0.pDrv, false);
960
961	/*
962	* Reset the device state.
963	*/
964	pThis->bIdle = 0;
965	pThis->fExtPipeActive = false;
966
967	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aEps); i++)
968	pThis->aEps[i].fHalted = false;
969
970	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aIfs); i++)
971	{
972	pThis->aIfs[i].fHasPendingChanges = false;
973	pThis->aIfs[i].enmState = USBHIDREQSTATE_READY;
974	}
975
976	if (!pUrb && !fSetConfig) /* (only device reset) */
977	pThis->bConfigurationValue = 0; /* default */
978
979	/*
980	* Ditch all pending URBs.
981	*/
982	PVUSBURB pCurUrb;
983	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aIfs); i++)
984	while ((pCurUrb = usbHidQueueRemoveHead(&pThis->aIfs[i].ToHostQueue)) != NULL)
985	{
986	pCurUrb->enmStatus = VUSBSTATUS_CRC;
987	usbHidLinkDone(pThis, pCurUrb);
988	}
989
990	if (pUrb)
991	return usbHidCompleteOk(pThis, pUrb, NULL, 0);
992	return VINF_SUCCESS;
993	}
994
995	/**
996	* Returns true if the usage code corresponds to a keyboard modifier key
997	* (left or right ctrl, shift, alt or GUI). The usage codes for these keys
998	* are the range 0xe0 to 0xe7.
999	*/
1000	static bool usbHidUsageCodeIsModifier(uint8_t u8Usage)
1001	{
1002	return u8Usage >= USBHID_MODIFIER_FIRST && u8Usage <= USBHID_MODIFIER_LAST;
1003	}
1004
1005	/**
1006	* Convert a USB HID usage code to a keyboard modifier flag. The arithmetic
1007	* is simple: the modifier keys have usage codes from 0xe0 to 0xe7, and the
1008	* lower nibble is the bit number of the flag.
1009	*/
1010	static uint8_t usbHidModifierToFlag(uint8_t u8Usage)
1011	{
1012	Assert(usbHidUsageCodeIsModifier(u8Usage));
1013	return RT_BIT(u8Usage & 0xf);
1014	}
1015
1016	/**
1017	* Returns true if the usage code corresponds to a System Control key.
1018	* The usage codes for these keys are the range 0x81 to 0x83.
1019	*/
1020	static bool usbHidUsageCodeIsSCKey(uint16_t u16Usage)
1021	{
1022	return u16Usage >= 0x81 && u16Usage <= 0x83;
1023	}
1024
1025	/**
1026	* Convert a USB HID usage code to a system control key mask. The system control
1027	* keys have usage codes from 0x81 to 0x83, and the lower nibble is the bit
1028	* position plus one.
1029	*/
1030	static uint8_t usbHidSCKeyToMask(uint16_t u16Usage)
1031	{
1032	Assert(usbHidUsageCodeIsSCKey(u16Usage));
1033	return RT_BIT((u16Usage & 0xf) - 1);
1034	}
1035
1036	/**
1037	* Create a USB HID keyboard report reflecting the current state of the
1038	* standard keyboard (up/down keys).
1039	*/
1040	static void usbHidBuildReportKbd(PUSBHIDK_REPORT pReport, uint8_t *pabDepressedKeys)
1041	{
1042	unsigned iBuf = 0;
1043	RT_ZERO(*pReport);
1044	for (unsigned iKey = 0; iKey < VBOX_USB_USAGE_ARRAY_SIZE; ++iKey)
1045	{
1046	Assert(iBuf <= RT_ELEMENTS(pReport->aKeys));
1047	if (pabDepressedKeys[iKey])
1048	{
1049	if (usbHidUsageCodeIsModifier(iKey))
1050	pReport->ShiftState \|= usbHidModifierToFlag(iKey);
1051	else if (iBuf == RT_ELEMENTS(pReport->aKeys))
1052	{
1053	/* The USB HID spec says that the entire vector should be
1054	* set to ErrorRollOver on overflow. We don't mind if this
1055	* path is taken several times for one report. */
1056	for (unsigned iBuf2 = 0;
1057	iBuf2 < RT_ELEMENTS(pReport->aKeys); ++iBuf2)
1058	pReport->aKeys[iBuf2] = USBHID_USAGE_ROLL_OVER;
1059	}
1060	else
1061	{
1062	/* Key index back to 32-bit HID code. */
1063	uint32_t u32HidCode = usbInternalCodeToHid(iKey);
1064	uint8_t u8HidPage = RT_LOBYTE(RT_HIWORD(u32HidCode));
1065	uint16_t u16HidUsage = RT_LOWORD(u32HidCode);
1066
1067	if (u8HidPage == USB_HID_KB_PAGE)
1068	{
1069	pReport->aKeys[iBuf] = (uint8_t)u16HidUsage;
1070	++iBuf;
1071	}
1072	}
1073	}
1074	}
1075	}
1076
1077	/**
1078	* Create a USB HID keyboard report reflecting the current state of the
1079	* consumer control keys. This is very easy as we have a bit mask that fully
1080	* reflects the state of all defined system control keys.
1081	*/
1082	static void usbHidBuildReportExt(PUSBHIDX_REPORT pReport, uint8_t *pabDepressedKeys)
1083	{
1084	RT_ZERO(*pReport);
1085
1086	for (unsigned iKey = 0; iKey < VBOX_USB_USAGE_ARRAY_SIZE; ++iKey)
1087	{
1088	if (pabDepressedKeys[iKey])
1089	{
1090	/* Key index back to 32-bit HID code. */
1091	uint32_t u32HidCode = usbInternalCodeToHid(iKey);
1092	uint8_t u8HidPage = RT_LOBYTE(RT_HIWORD(u32HidCode));
1093	uint16_t u16HidUsage = RT_LOWORD(u32HidCode);
1094
1095	if (u8HidPage == USB_HID_CC_PAGE)
1096	pReport->uKeyCC = u16HidUsage;
1097	else if (u8HidPage == USB_HID_DC_PAGE)
1098	if (usbHidUsageCodeIsSCKey(u16HidUsage))
1099	pReport->uSCKeys \|= usbHidSCKeyToMask(u16HidUsage);
1100	}
1101	}
1102	}
1103
1104	/**
1105	* Handles a SET_REPORT request sent to the default control pipe. Note
1106	* that unrecognized requests are ignored without reporting an error.
1107	*/
1108	static void usbHidSetReport(PUSBHID pThis, PVUSBURB pUrb)
1109	{
1110	PVUSBSETUP pSetup = (PVUSBSETUP)&pUrb->abData[0];
1111	Assert(pSetup->bRequest == HID_REQ_SET_REPORT);
1112
1113	/* The LED report is the 3rd report, ID 0 (-> wValue 0x200). */
1114	if (pSetup->wIndex == 0 && pSetup->wLength == 1 && pSetup->wValue == 0x200)
1115	{
1116	PDMKEYBLEDS enmLeds = PDMKEYBLEDS_NONE;
1117	uint8_t u8LEDs = pUrb->abData[sizeof(*pSetup)];
1118	LogFlowFunc(("Setting keybooard LEDs to u8LEDs=%02X\n", u8LEDs));
1119
1120	/* Translate LED state to PDM format and send upstream. */
1121	if (u8LEDs & 0x01)
1122	enmLeds = (PDMKEYBLEDS)(enmLeds \| PDMKEYBLEDS_NUMLOCK);
1123	if (u8LEDs & 0x02)
1124	enmLeds = (PDMKEYBLEDS)(enmLeds \| PDMKEYBLEDS_CAPSLOCK);
1125	if (u8LEDs & 0x04)
1126	enmLeds = (PDMKEYBLEDS)(enmLeds \| PDMKEYBLEDS_SCROLLLOCK);
1127
1128	pThis->Lun0.pDrv->pfnLedStatusChange(pThis->Lun0.pDrv, enmLeds);
1129	}
1130	}
1131
1132	/**
1133	* Sends a state report to the guest if there is a URB available.
1134	*/
1135	static void usbHidSendReport(PUSBHID pThis, PUSBHIDIF pIf)
1136	{
1137	PVUSBURB pUrb = usbHidQueueRemoveHead(&pIf->ToHostQueue);
1138	if (pUrb)
1139	{
1140	pIf->fHasPendingChanges = false;
1141	if (pIf == &pThis->aIfs[0])
1142	{
1143	USBHIDK_REPORT ReportKbd;
1144
1145	usbHidBuildReportKbd(&ReportKbd, pThis->abDepressedKeys);
1146	usbHidCompleteOk(pThis, pUrb, &ReportKbd, sizeof(ReportKbd));
1147	}
1148	else
1149	{
1150	Assert(pIf == &pThis->aIfs[1]);
1151	USBHIDX_REPORT ReportExt;
1152
1153	usbHidBuildReportExt(&ReportExt, pThis->abDepressedKeys);
1154	usbHidCompleteOk(pThis, pUrb, &ReportExt, sizeof(ReportExt));
1155	}
1156	}
1157	else
1158	{
1159	Log2(("No available URB for USB kbd\n"));
1160	pIf->fHasPendingChanges = true;
1161	}
1162	}
1163
1164	/**
1165	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
1166	*/
1167	static DECLCALLBACK(void ) usbHidKeyboardQueryInterface(PPDMIBASE pInterface, const char pszIID)
1168	{
1169	PUSBHID pThis = RT_FROM_MEMBER(pInterface, USBHID, Lun0.IBase);
1170	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Lun0.IBase);
1171	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIKEYBOARDPORT, &pThis->Lun0.IPort);
1172	return NULL;
1173	}
1174
1175	/**
1176	* @interface_method_impl{PDMIKEYBOARDPORT,pfnPutEventHid}
1177	*/
1178	static DECLCALLBACK(int) usbHidKeyboardPutEvent(PPDMIKEYBOARDPORT pInterface, uint32_t idUsage)
1179	{
1180	PUSBHID pThis = RT_FROM_MEMBER(pInterface, USBHID, Lun0.IPort);
1181	PUSBHIDIF pIf;
1182	bool fKeyDown;
1183	bool fHaveEvent = true;
1184	int rc = VINF_SUCCESS;
1185	int iKeyCode;
1186	uint8_t u8HidPage = RT_LOBYTE(RT_HIWORD(idUsage));
1187
1188	/* Let's see what we got... */
1189	fKeyDown = !(idUsage & PDMIKBDPORT_KEY_UP);
1190
1191	/* Always respond to USB_HID_KB_PAGE, but quietly drop USB_HID_CC_PAGE/USB_HID_DC_PAGE
1192	* events unless the device is in the extended mode. And drop anything else, too.
1193	*/
1194	if (u8HidPage == USB_HID_KB_PAGE)
1195	pIf = &pThis->aIfs[0];
1196	else
1197	{
1198	if ( pThis->fExtPipeActive
1199	&& ((u8HidPage == USB_HID_CC_PAGE) \|\| (u8HidPage == USB_HID_DC_PAGE)))
1200	pIf = &pThis->aIfs[1];
1201	else
1202	return VINF_SUCCESS; /* Must consume data to avoid blockage. */
1203	}
1204
1205	iKeyCode = usbHidToInternalCode(idUsage);
1206	AssertReturn((iKeyCode > 0 && iKeyCode <= VBOX_USB_MAX_USAGE_CODE) \|\| (idUsage & PDMIKBDPORT_RELEASE_KEYS), VERR_INTERNAL_ERROR);
1207
1208	RTCritSectEnter(&pThis->CritSect);
1209
1210	if (RT_LIKELY(!(idUsage & PDMIKBDPORT_RELEASE_KEYS)))
1211	{
1212	LogFlowFunc(("key %s: %08X (iKeyCode 0x%x)\n", fKeyDown ? "down" : "up", idUsage, iKeyCode));
1213
1214	/*
1215	* Due to host key repeat, we can get key events for keys which are
1216	* already depressed. Drop those right here.
1217	*/
1218	if (fKeyDown && pThis->abDepressedKeys[iKeyCode])
1219	fHaveEvent = false;
1220
1221	/* If there is already a pending event, we won't accept a new one yet. */
1222	if (pIf->fHasPendingChanges && fHaveEvent)
1223	{
1224	rc = VERR_TRY_AGAIN;
1225	}
1226	else if (fHaveEvent)
1227	{
1228	/* Regular key event - update keyboard state. */
1229	if (fKeyDown)
1230	pThis->abDepressedKeys[iKeyCode] = 1;
1231	else
1232	pThis->abDepressedKeys[iKeyCode] = 0;
1233
1234	/*
1235	* Try sending a report. Note that we already decided to consume the
1236	* event regardless of whether a URB is available or not. If it's not,
1237	* we will simply not accept any further events.
1238	*/
1239	usbHidSendReport(pThis, pIf);
1240	}
1241	}
1242	else
1243	{
1244	LogFlowFunc(("Release all keys.\n"));
1245
1246	/* Clear all currently depressed keys. */
1247	RT_ZERO(pThis->abDepressedKeys);
1248	}
1249
1250	RTCritSectLeave(&pThis->CritSect);
1251
1252	return rc;
1253	}
1254
1255	/**
1256	* @interface_method_impl{PDMUSBREG,pfnUrbReap}
1257	*/
1258	static DECLCALLBACK(PVUSBURB) usbHidUrbReap(PPDMUSBINS pUsbIns, RTMSINTERVAL cMillies)
1259	{
1260	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1261	//LogFlow(("usbHidUrbReap/#%u: cMillies=%u\n", pUsbIns->iInstance, cMillies));
1262
1263	RTCritSectEnter(&pThis->CritSect);
1264
1265	PVUSBURB pUrb = usbHidQueueRemoveHead(&pThis->DoneQueue);
1266	if (!pUrb && cMillies)
1267	{
1268	/* Wait */
1269	pThis->fHaveDoneQueueWaiter = true;
1270	RTCritSectLeave(&pThis->CritSect);
1271
1272	RTSemEventWait(pThis->hEvtDoneQueue, cMillies);
1273
1274	RTCritSectEnter(&pThis->CritSect);
1275	pThis->fHaveDoneQueueWaiter = false;
1276
1277	pUrb = usbHidQueueRemoveHead(&pThis->DoneQueue);
1278	}
1279
1280	RTCritSectLeave(&pThis->CritSect);
1281
1282	if (pUrb)
1283	Log(("usbHidUrbReap/#%u: pUrb=%p:%s\n", pUsbIns->iInstance, pUrb, pUrb->pszDesc));
1284	return pUrb;
1285	}
1286
1287
1288	/**
1289	* @interface_method_impl{PDMUSBREG,pfnWakeup}
1290	*/
1291	static DECLCALLBACK(int) usbHidWakeup(PPDMUSBINS pUsbIns)
1292	{
1293	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1294
1295	return RTSemEventSignal(pThis->hEvtDoneQueue);
1296	}
1297
1298
1299	/**
1300	* @interface_method_impl{PDMUSBREG,pfnUrbCancel}
1301	*/
1302	static DECLCALLBACK(int) usbHidUrbCancel(PPDMUSBINS pUsbIns, PVUSBURB pUrb)
1303	{
1304	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1305	LogFlow(("usbHidUrbCancel/#%u: pUrb=%p:%s\n", pUsbIns->iInstance, pUrb, pUrb->pszDesc));
1306	RTCritSectEnter(&pThis->CritSect);
1307
1308	/*
1309	* Remove the URB from its to-host queue and move it onto the done queue.
1310	*/
1311	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aIfs); i++)
1312	if (usbHidQueueRemove(&pThis->aIfs[i].ToHostQueue, pUrb))
1313	usbHidLinkDone(pThis, pUrb);
1314
1315	RTCritSectLeave(&pThis->CritSect);
1316	return VINF_SUCCESS;
1317	}
1318
1319
1320	/**
1321	* Handles request sent to the inbound (device to host) interrupt pipe. This is
1322	* rather different from bulk requests because an interrupt read URB may complete
1323	* after arbitrarily long time.
1324	*/
1325	static int usbHidHandleIntrDevToHost(PUSBHID pThis, PUSBHIDEP pEp, PUSBHIDIF pIf, PVUSBURB pUrb)
1326	{
1327	/*
1328	* Stall the request if the pipe is halted.
1329	*/
1330	if (RT_UNLIKELY(pEp->fHalted))
1331	return usbHidCompleteStall(pThis, NULL, pUrb, "Halted pipe");
1332
1333	/*
1334	* Deal with the URB according to the endpoint/interface state.
1335	*/
1336	switch (pIf->enmState)
1337	{
1338	/*
1339	* We've data left to transfer to the host.
1340	*/
1341	case USBHIDREQSTATE_DATA_TO_HOST:
1342	{
1343	AssertFailed();
1344	Log(("usbHidHandleIntrDevToHost: Entering STATUS\n"));
1345	return usbHidCompleteOk(pThis, pUrb, NULL, 0);
1346	}
1347
1348	/*
1349	* Status transfer.
1350	*/
1351	case USBHIDREQSTATE_STATUS:
1352	{
1353	AssertFailed();
1354	Log(("usbHidHandleIntrDevToHost: Entering READY\n"));
1355	pIf->enmState = USBHIDREQSTATE_READY;
1356	return usbHidCompleteOk(pThis, pUrb, NULL, 0);
1357	}
1358
1359	case USBHIDREQSTATE_READY:
1360	usbHidQueueAddTail(&pIf->ToHostQueue, pUrb);
1361	/* If device was not set idle, send the current report right away. */
1362	if (pThis->bIdle != 0 \|\| pIf->fHasPendingChanges)
1363	{
1364	usbHidSendReport(pThis, pIf);
1365	LogFlow(("usbHidHandleIntrDevToHost: Sent report via %p:%s\n", pUrb, pUrb->pszDesc));
1366	Assert(!pIf->fHasPendingChanges); /* Since we just got a URB... */
1367	/* There may be more input queued up. Ask for it now. */
1368	pThis->Lun0.pDrv->pfnFlushQueue(pThis->Lun0.pDrv);
1369	}
1370	return VINF_SUCCESS;
1371
1372	/*
1373	* Bad states, stall.
1374	*/
1375	default:
1376	Log(("usbHidHandleIntrDevToHost: enmState=%d cbData=%#x\n", pIf->enmState, pUrb->cbData));
1377	return usbHidCompleteStall(pThis, NULL, pUrb, "Really bad state (D2H)!");
1378	}
1379	}
1380
1381
1382	/**
1383	* Handles request sent to the default control pipe.
1384	*/
1385	static int usbHidHandleDefaultPipe(PUSBHID pThis, PUSBHIDEP pEp, PVUSBURB pUrb)
1386	{
1387	PVUSBSETUP pSetup = (PVUSBSETUP)&pUrb->abData[0];
1388	LogFlow(("usbHidHandleDefaultPipe: cbData=%d\n", pUrb->cbData));
1389
1390	AssertReturn(pUrb->cbData >= sizeof(*pSetup), VERR_VUSB_FAILED_TO_QUEUE_URB);
1391
1392	if ((pSetup->bmRequestType & VUSB_REQ_MASK) == VUSB_REQ_STANDARD)
1393	{
1394	switch (pSetup->bRequest)
1395	{
1396	case VUSB_REQ_GET_DESCRIPTOR:
1397	{
1398	switch (pSetup->bmRequestType)
1399	{
1400	case VUSB_TO_DEVICE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
1401	{
1402	switch (pSetup->wValue >> 8)
1403	{
1404	case VUSB_DT_STRING:
1405	Log(("usbHid: GET_DESCRIPTOR DT_STRING wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
1406	break;
1407	default:
1408	Log(("usbHid: GET_DESCRIPTOR, huh? wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
1409	break;
1410	}
1411	break;
1412	}
1413
1414	case VUSB_TO_INTERFACE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
1415	{
1416	switch (pSetup->wValue >> 8)
1417	{
1418	case DT_IF_HID_DESCRIPTOR:
1419	{
1420	uint32_t cbSrc;
1421	const void *pSrc;
1422
1423	if (pSetup->wIndex == 0)
1424	{
1425	cbSrc = RT_MIN(pSetup->wLength, sizeof(g_UsbHidIfHidDescKbd));
1426	pSrc = &g_UsbHidIfHidDescKbd;
1427	}
1428	else
1429	{
1430	cbSrc = RT_MIN(pSetup->wLength, sizeof(g_UsbHidIfHidDescExt));
1431	pSrc = &g_UsbHidIfHidDescExt;
1432	}
1433	Log(("usbHidKbd: GET_DESCRIPTOR DT_IF_HID_DESCRIPTOR wValue=%#x wIndex=%#x cbSrc=%#x\n", pSetup->wValue, pSetup->wIndex, cbSrc));
1434	return usbHidCompleteOk(pThis, pUrb, pSrc, cbSrc);
1435	}
1436
1437	case DT_IF_HID_REPORT:
1438	{
1439	uint32_t cbSrc;
1440	const void *pSrc;
1441
1442	/* Returned data is written after the setup message. */
1443	if (pSetup->wIndex == 0)
1444	{
1445	cbSrc = RT_MIN(pSetup->wLength, sizeof(g_UsbHidReportDescKbd));
1446	pSrc = &g_UsbHidReportDescKbd;
1447	}
1448	else
1449	{
1450	cbSrc = RT_MIN(pSetup->wLength, sizeof(g_UsbHidReportDescExt));
1451	pSrc = &g_UsbHidReportDescExt;
1452	}
1453
1454	Log(("usbHid: GET_DESCRIPTOR DT_IF_HID_REPORT wValue=%#x wIndex=%#x cbSrc=%#x\n", pSetup->wValue, pSetup->wIndex, cbSrc));
1455	return usbHidCompleteOk(pThis, pUrb, pSrc, cbSrc);
1456	}
1457
1458	default:
1459	Log(("usbHid: GET_DESCRIPTOR, huh? wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
1460	break;
1461	}
1462	break;
1463	}
1464
1465	default:
1466	Log(("usbHid: Bad GET_DESCRIPTOR req: bmRequestType=%#x\n", pSetup->bmRequestType));
1467	return usbHidCompleteStall(pThis, pEp, pUrb, "Bad GET_DESCRIPTOR");
1468	}
1469	break;
1470	}
1471
1472	case VUSB_REQ_GET_STATUS:
1473	{
1474	uint16_t wRet = 0;
1475
1476	if (pSetup->wLength != 2)
1477	{
1478	Log(("usbHid: Bad GET_STATUS req: wLength=%#x\n", pSetup->wLength));
1479	break;
1480	}
1481	Assert(pSetup->wValue == 0);
1482	switch (pSetup->bmRequestType)
1483	{
1484	case VUSB_TO_DEVICE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
1485	{
1486	Assert(pSetup->wIndex == 0);
1487	Log(("usbHid: GET_STATUS (device)\n"));
1488	wRet = 0; /* Not self-powered, no remote wakeup. */
1489	return usbHidCompleteOk(pThis, pUrb, &wRet, sizeof(wRet));
1490	}
1491
1492	case VUSB_TO_INTERFACE \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
1493	{
1494	if (pSetup->wIndex == 0)
1495	{
1496	return usbHidCompleteOk(pThis, pUrb, &wRet, sizeof(wRet));
1497	}
1498	Log(("usbHid: GET_STATUS (interface) invalid, wIndex=%#x\n", pSetup->wIndex));
1499	break;
1500	}
1501
1502	case VUSB_TO_ENDPOINT \| VUSB_REQ_STANDARD \| VUSB_DIR_TO_HOST:
1503	{
1504	if (pSetup->wIndex < RT_ELEMENTS(pThis->aEps))
1505	{
1506	wRet = pThis->aEps[pSetup->wIndex].fHalted ? 1 : 0;
1507	return usbHidCompleteOk(pThis, pUrb, &wRet, sizeof(wRet));
1508	}
1509	Log(("usbHid: GET_STATUS (endpoint) invalid, wIndex=%#x\n", pSetup->wIndex));
1510	break;
1511	}
1512
1513	default:
1514	Log(("usbHid: Bad GET_STATUS req: bmRequestType=%#x\n", pSetup->bmRequestType));
1515	return usbHidCompleteStall(pThis, pEp, pUrb, "Bad GET_STATUS");
1516	}
1517	break;
1518	}
1519
1520	case VUSB_REQ_CLEAR_FEATURE:
1521	break;
1522	}
1523
1524	/** @todo implement this. */
1525	Log(("usbHid: Implement standard request: bmRequestType=%#x bRequest=%#x wValue=%#x wIndex=%#x wLength=%#x\n",
1526	pSetup->bmRequestType, pSetup->bRequest, pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1527
1528	usbHidCompleteStall(pThis, pEp, pUrb, "TODO: standard request stuff");
1529	}
1530	else if ((pSetup->bmRequestType & VUSB_REQ_MASK) == VUSB_REQ_CLASS)
1531	{
1532	switch (pSetup->bRequest)
1533	{
1534	case HID_REQ_SET_IDLE:
1535	{
1536	switch (pSetup->bmRequestType)
1537	{
1538	case VUSB_TO_INTERFACE \| VUSB_REQ_CLASS \| VUSB_DIR_TO_DEVICE:
1539	{
1540	Log(("usbHid: SET_IDLE wValue=%#x wIndex=%#x\n", pSetup->wValue, pSetup->wIndex));
1541	pThis->bIdle = pSetup->wValue >> 8;
1542	/* Consider 24ms to mean zero for keyboards (see IOUSBHIDDriver) */
1543	if (pThis->bIdle == 6) pThis->bIdle = 0;
1544	return usbHidCompleteOk(pThis, pUrb, NULL, 0);
1545	}
1546	break;
1547	}
1548	break;
1549	}
1550	case HID_REQ_GET_IDLE:
1551	{
1552	switch (pSetup->bmRequestType)
1553	{
1554	case VUSB_TO_INTERFACE \| VUSB_REQ_CLASS \| VUSB_DIR_TO_HOST:
1555	{
1556	Log(("usbHid: GET_IDLE wValue=%#x wIndex=%#x, returning %#x\n", pSetup->wValue, pSetup->wIndex, pThis->bIdle));
1557	return usbHidCompleteOk(pThis, pUrb, &pThis->bIdle, sizeof(pThis->bIdle));
1558	}
1559	break;
1560	}
1561	break;
1562	}
1563	case HID_REQ_SET_REPORT:
1564	{
1565	switch (pSetup->bmRequestType)
1566	{
1567	case VUSB_TO_INTERFACE \| VUSB_REQ_CLASS \| VUSB_DIR_TO_DEVICE:
1568	{
1569	Log(("usbHid: SET_REPORT wValue=%#x wIndex=%#x wLength=%#x\n", pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1570	usbHidSetReport(pThis, pUrb);
1571	return usbHidCompleteOk(pThis, pUrb, NULL, 0);
1572	}
1573	break;
1574	}
1575	break;
1576	}
1577	}
1578	Log(("usbHid: Unimplemented class request: bmRequestType=%#x bRequest=%#x wValue=%#x wIndex=%#x wLength=%#x\n",
1579	pSetup->bmRequestType, pSetup->bRequest, pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1580
1581	usbHidCompleteStall(pThis, pEp, pUrb, "TODO: class request stuff");
1582	}
1583	else
1584	{
1585	Log(("usbHid: Unknown control msg: bmRequestType=%#x bRequest=%#x wValue=%#x wIndex=%#x wLength=%#x\n",
1586	pSetup->bmRequestType, pSetup->bRequest, pSetup->wValue, pSetup->wIndex, pSetup->wLength));
1587	return usbHidCompleteStall(pThis, pEp, pUrb, "Unknown control msg");
1588	}
1589
1590	return VINF_SUCCESS;
1591	}
1592
1593
1594	/**
1595	* @interface_method_impl{PDMUSBREG,pfnUrbQueue}
1596	*/
1597	static DECLCALLBACK(int) usbHidQueueUrb(PPDMUSBINS pUsbIns, PVUSBURB pUrb)
1598	{
1599	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1600	LogFlow(("usbHidQueue/#%u: pUrb=%p:%s EndPt=%#x\n", pUsbIns->iInstance, pUrb, pUrb->pszDesc, pUrb->EndPt));
1601	RTCritSectEnter(&pThis->CritSect);
1602
1603	/*
1604	* Parse on a per-endpoint basis.
1605	*/
1606	int rc;
1607	switch (pUrb->EndPt)
1608	{
1609	case 0:
1610	rc = usbHidHandleDefaultPipe(pThis, &pThis->aEps[0], pUrb);
1611	break;
1612
1613	/* Standard keyboard interface. */
1614	case 0x81:
1615	AssertFailed();
1616	RT_FALL_THRU();
1617	case 0x01:
1618	rc = usbHidHandleIntrDevToHost(pThis, &pThis->aEps[1], &pThis->aIfs[0], pUrb);
1619	break;
1620
1621	/* Extended multimedia/control keys interface. */
1622	case 0x82:
1623	AssertFailed();
1624	RT_FALL_THRU();
1625	case 0x02:
1626	if (pThis->enmMode == USBKBDMODE_EXTENDED)
1627	{
1628	rc = usbHidHandleIntrDevToHost(pThis, &pThis->aEps[2], &pThis->aIfs[1], pUrb);
1629	pThis->fExtPipeActive = true;
1630	break;
1631	}
1632	RT_FALL_THRU();
1633	default:
1634	AssertMsgFailed(("EndPt=%d\n", pUrb->EndPt));
1635	rc = VERR_VUSB_FAILED_TO_QUEUE_URB;
1636	break;
1637	}
1638
1639	RTCritSectLeave(&pThis->CritSect);
1640	return rc;
1641	}
1642
1643
1644	/**
1645	* @interface_method_impl{PDMUSBREG,pfnUsbClearHaltedEndpoint}
1646	*/
1647	static DECLCALLBACK(int) usbHidUsbClearHaltedEndpoint(PPDMUSBINS pUsbIns, unsigned uEndpoint)
1648	{
1649	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1650	LogFlow(("usbHidUsbClearHaltedEndpoint/#%u: uEndpoint=%#x\n", pUsbIns->iInstance, uEndpoint));
1651
1652	if ((uEndpoint & ~0x80) < RT_ELEMENTS(pThis->aEps))
1653	{
1654	RTCritSectEnter(&pThis->CritSect);
1655	pThis->aEps[(uEndpoint & ~0x80)].fHalted = false;
1656	RTCritSectLeave(&pThis->CritSect);
1657	}
1658
1659	return VINF_SUCCESS;
1660	}
1661
1662
1663	/**
1664	* @interface_method_impl{PDMUSBREG,pfnUsbSetInterface}
1665	*/
1666	static DECLCALLBACK(int) usbHidUsbSetInterface(PPDMUSBINS pUsbIns, uint8_t bInterfaceNumber, uint8_t bAlternateSetting)
1667	{
1668	RT_NOREF3(pUsbIns, bInterfaceNumber, bAlternateSetting);
1669	LogFlow(("usbHidUsbSetInterface/#%u: bInterfaceNumber=%u bAlternateSetting=%u\n", pUsbIns->iInstance, bInterfaceNumber, bAlternateSetting));
1670	Assert(bAlternateSetting == 0);
1671	return VINF_SUCCESS;
1672	}
1673
1674
1675	/**
1676	* @interface_method_impl{PDMUSBREG,pfnUsbSetConfiguration}
1677	*/
1678	static DECLCALLBACK(int) usbHidUsbSetConfiguration(PPDMUSBINS pUsbIns, uint8_t bConfigurationValue,
1679	const void pvOldCfgDesc, const void pvOldIfState, const void *pvNewCfgDesc)
1680	{
1681	RT_NOREF3(pvOldCfgDesc, pvOldIfState, pvNewCfgDesc);
1682	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1683	LogFlow(("usbHidUsbSetConfiguration/#%u: bConfigurationValue=%u\n", pUsbIns->iInstance, bConfigurationValue));
1684	Assert(bConfigurationValue == 1);
1685	RTCritSectEnter(&pThis->CritSect);
1686
1687	/*
1688	* If the same config is applied more than once, it's a kind of reset.
1689	*/
1690	if (pThis->bConfigurationValue == bConfigurationValue)
1691	usbHidResetWorker(pThis, NULL, true /fSetConfig/); /** @todo figure out the exact difference */
1692	pThis->bConfigurationValue = bConfigurationValue;
1693
1694	/*
1695	* Tell the other end that the keyboard is now enabled and wants
1696	* to receive keystrokes.
1697	*/
1698	pThis->Lun0.pDrv->pfnSetActive(pThis->Lun0.pDrv, true);
1699
1700	RTCritSectLeave(&pThis->CritSect);
1701	return VINF_SUCCESS;
1702	}
1703
1704
1705	/**
1706	* @interface_method_impl{PDMUSBREG,pfnUsbGetDescriptorCache}
1707	*/
1708	static DECLCALLBACK(PCPDMUSBDESCCACHE) usbHidUsbGetDescriptorCache(PPDMUSBINS pUsbIns)
1709	{
1710	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1711	LogRelFlow(("usbHidUsbGetDescriptorCache/#%u:\n", pUsbIns->iInstance));
1712	switch (pThis->enmMode)
1713	{
1714	case USBKBDMODE_BASIC:
1715	return &g_UsbHidBasDescCache;
1716	case USBKBDMODE_EXTENDED:
1717	return &g_UsbHidExtDescCache;
1718	default:
1719	return NULL;
1720	}
1721	}
1722
1723
1724	/**
1725	* @interface_method_impl{PDMUSBREG,pfnUsbReset}
1726	*/
1727	static DECLCALLBACK(int) usbHidUsbReset(PPDMUSBINS pUsbIns, bool fResetOnLinux)
1728	{
1729	RT_NOREF1(fResetOnLinux);
1730	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1731	LogFlow(("usbHidUsbReset/#%u:\n", pUsbIns->iInstance));
1732	RTCritSectEnter(&pThis->CritSect);
1733
1734	int rc = usbHidResetWorker(pThis, NULL, false /fSetConfig/);
1735
1736	RTCritSectLeave(&pThis->CritSect);
1737	return rc;
1738	}
1739
1740
1741	/**
1742	* @interface_method_impl{PDMUSBREG,pfnDestruct}
1743	*/
1744	static DECLCALLBACK(void) usbHidDestruct(PPDMUSBINS pUsbIns)
1745	{
1746	PDMUSB_CHECK_VERSIONS_RETURN_VOID(pUsbIns);
1747	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1748	LogFlow(("usbHidDestruct/#%u:\n", pUsbIns->iInstance));
1749
1750	if (RTCritSectIsInitialized(&pThis->CritSect))
1751	{
1752	/* Let whoever runs in this critical section complete. */
1753	RTCritSectEnter(&pThis->CritSect);
1754	RTCritSectLeave(&pThis->CritSect);
1755	RTCritSectDelete(&pThis->CritSect);
1756	}
1757
1758	if (pThis->hEvtDoneQueue != NIL_RTSEMEVENT)
1759	{
1760	RTSemEventDestroy(pThis->hEvtDoneQueue);
1761	pThis->hEvtDoneQueue = NIL_RTSEMEVENT;
1762	}
1763	}
1764
1765
1766	/**
1767	* @interface_method_impl{PDMUSBREG,pfnConstruct}
1768	*/
1769	static DECLCALLBACK(int) usbHidConstruct(PPDMUSBINS pUsbIns, int iInstance, PCFGMNODE pCfg, PCFGMNODE pCfgGlobal)
1770	{
1771	RT_NOREF1(pCfgGlobal);
1772	PDMUSB_CHECK_VERSIONS_RETURN(pUsbIns);
1773	PUSBHID pThis = PDMINS_2_DATA(pUsbIns, PUSBHID);
1774	PCPDMUSBHLP pHlp = pUsbIns->pHlpR3;
1775	Log(("usbHidConstruct/#%u:\n", iInstance));
1776
1777	/*
1778	* Perform the basic structure initialization first so the destructor
1779	* will not misbehave.
1780	*/
1781	pThis->pUsbIns = pUsbIns;
1782	pThis->hEvtDoneQueue = NIL_RTSEMEVENT;
1783	usbHidQueueInit(&pThis->DoneQueue);
1784	for (unsigned i = 0; i < RT_ELEMENTS(pThis->aIfs); i++)
1785	usbHidQueueInit(&pThis->aIfs[i].ToHostQueue);
1786
1787	int rc = RTCritSectInit(&pThis->CritSect);
1788	AssertRCReturn(rc, rc);
1789
1790	rc = RTSemEventCreate(&pThis->hEvtDoneQueue);
1791	AssertRCReturn(rc, rc);
1792
1793	/*
1794	* Validate and read the configuration.
1795	*/
1796	rc = pHlp->pfnCFGMValidateConfig(pCfg, "/", "Mode", "Config", "UsbHid", iInstance);
1797	if (RT_FAILURE(rc))
1798	return rc;
1799	char szMode[64];
1800	rc = pHlp->pfnCFGMQueryStringDef(pCfg, "Mode", szMode, sizeof(szMode), "basic");
1801	if (RT_FAILURE(rc))
1802	return PDMUsbHlpVMSetError(pUsbIns, rc, RT_SRC_POS, N_("HID failed to query settings"));
1803	if (!RTStrCmp(szMode, "basic"))
1804	pThis->enmMode = USBKBDMODE_BASIC;
1805	else if (!RTStrCmp(szMode, "extended"))
1806	pThis->enmMode = USBKBDMODE_EXTENDED;
1807	else
1808	return PDMUsbHlpVMSetError(pUsbIns, rc, RT_SRC_POS,
1809	N_("Invalid HID mode"));
1810
1811	pThis->Lun0.IBase.pfnQueryInterface = usbHidKeyboardQueryInterface;
1812	pThis->Lun0.IPort.pfnPutEventHid = usbHidKeyboardPutEvent;
1813
1814	/*
1815	* Attach the keyboard driver.
1816	*/
1817	rc = PDMUsbHlpDriverAttach(pUsbIns, 0 /iLun/, &pThis->Lun0.IBase, &pThis->Lun0.pDrvBase, "Keyboard Port");
1818	if (RT_FAILURE(rc))
1819	return PDMUsbHlpVMSetError(pUsbIns, rc, RT_SRC_POS, N_("HID failed to attach keyboard driver"));
1820
1821	pThis->Lun0.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Lun0.pDrvBase, PDMIKEYBOARDCONNECTOR);
1822	if (!pThis->Lun0.pDrv)
1823	return PDMUsbHlpVMSetError(pUsbIns, VERR_PDM_MISSING_INTERFACE, RT_SRC_POS, N_("HID failed to query keyboard interface"));
1824
1825	return VINF_SUCCESS;
1826	}
1827
1828
1829	/**
1830	* The USB Human Interface Device (HID) Keyboard registration record.
1831	*/
1832	const PDMUSBREG g_UsbHidKbd =
1833	{
1834	/* u32Version */
1835	PDM_USBREG_VERSION,
1836	/* szName */
1837	"HidKeyboard",
1838	/* pszDescription */
1839	"USB HID Keyboard.",
1840	/* fFlags */
1841	0,
1842	/* cMaxInstances */
1843	~0U,
1844	/* cbInstance */
1845	sizeof(USBHID),
1846	/* pfnConstruct */
1847	usbHidConstruct,
1848	/* pfnDestruct */
1849	usbHidDestruct,
1850	/* pfnVMInitComplete */
1851	NULL,
1852	/* pfnVMPowerOn */
1853	NULL,
1854	/* pfnVMReset */
1855	NULL,
1856	/* pfnVMSuspend */
1857	NULL,
1858	/* pfnVMResume */
1859	NULL,
1860	/* pfnVMPowerOff */
1861	NULL,
1862	/* pfnHotPlugged */
1863	NULL,
1864	/* pfnHotUnplugged */
1865	NULL,
1866	/* pfnDriverAttach */
1867	NULL,
1868	/* pfnDriverDetach */
1869	NULL,
1870	/* pfnQueryInterface */
1871	NULL,
1872	/* pfnUsbReset */
1873	usbHidUsbReset,
1874	/* pfnUsbGetDescriptorCache */
1875	usbHidUsbGetDescriptorCache,
1876	/* pfnUsbSetConfiguration */
1877	usbHidUsbSetConfiguration,
1878	/* pfnUsbSetInterface */
1879	usbHidUsbSetInterface,
1880	/* pfnUsbClearHaltedEndpoint */
1881	usbHidUsbClearHaltedEndpoint,
1882	/* pfnUrbNew */
1883	NULL/usbHidUrbNew/,
1884	/* pfnUrbQueue */
1885	usbHidQueueUrb,
1886	/* pfnUrbCancel */
1887	usbHidUrbCancel,
1888	/* pfnUrbReap */
1889	usbHidUrbReap,
1890	/* pfnWakeup */
1891	usbHidWakeup,
1892	/* u32TheEnd */
1893	PDM_USBREG_VERSION
1894	};

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Input/UsbKbd.cpp@ 98410

Download in other formats: