orgs.asm@ 53426

Last change on this file since 53426 was 51061, checked in by vboxsync, 11 years ago
Forgot to move label.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 37.4 KB

Line
1	;;
2	;; Copyright (C) 2006-2011 Oracle Corporation
3	;;
4	;; This file is part of VirtualBox Open Source Edition (OSE), as
5	;; available from http://www.virtualbox.org. This file is free software;
6	;; you can redistribute it and/or modify it under the terms of the GNU
7	;; General Public License (GPL) as published by the Free Software
8	;; Foundation, in version 2 as it comes in the "COPYING" file of the
9	;; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
10	;; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
11	;; --------------------------------------------------------------------
12	;;
13	;; This code is based on:
14	;;
15	;; ROM BIOS for use with Bochs/Plex86/QEMU emulation environment
16	;;
17	;; Copyright (C) 2002 MandrakeSoft S.A.
18	;;
19	;; MandrakeSoft S.A.
20	;; 43, rue d'Aboukir
21	;; 75002 Paris - France
22	;; http://www.linux-mandrake.com/
23	;; http://www.mandrakesoft.com/
24	;;
25	;; This library is free software; you can redistribute it and/or
26	;; modify it under the terms of the GNU Lesser General Public
27	;; License as published by the Free Software Foundation; either
28	;; version 2 of the License, or (at your option) any later version.
29	;;
30	;; This library is distributed in the hope that it will be useful,
31	;; but WITHOUT ANY WARRANTY; without even the implied warranty of
32	;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
33	;; Lesser General Public License for more details.
34	;;
35	;; You should have received a copy of the GNU Lesser General Public
36	;; License along with this library; if not, write to the Free Software
37	;; Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
38	;;
39	;;
40
41
42	; Oracle LGPL Disclaimer: For the avoidance of doubt, except that if any license choice
43	; other than GPL or LGPL is available it will apply instead, Oracle elects to use only
44	; the Lesser General Public License version 2.1 (LGPLv2) at this time for any software where
45	; a choice of LGPL license versions is made available with the language indicating
46	; that LGPLv2 or any later version may be used, or where a choice of which version
47	; of the LGPL is applied is otherwise unspecified.
48
49	EBDA_SEG equ 09FC0h ; starts at 639K
50	EBDA_SIZE equ 1 ; 1K
51	BASE_MEM_IN_K equ (640 - EBDA_SIZE)
52
53	CMOS_ADDR equ 070h
54	CMOS_DATA equ 071h
55
56
57	PIC_CMD_EOI equ 020h
58	PIC_MASTER equ 020h
59	PIC_SLAVE equ 0A0h
60
61	BIOS_FIX_BASE equ 0E000h
62
63	SYS_MODEL_ID equ 0FCh ; PC/AT
64	SYS_SUBMODEL_ID equ 0
65	BIOS_REVISION equ 1
66
67	BIOS_BUILD_DATE equ '06/23/99'
68	BIOS_COPYRIGHT equ 'Oracle VM VirtualBox BIOS'
69
70	BX_ROMBIOS32 equ 0
71	BX_CALL_INT15_4F equ 1
72
73	;; Set a fixed BIOS location, with a marker for verification
74	BIOSORG macro addr
75	org addr - BIOS_FIX_BASE - 2
76	db 'XM'
77	endm
78
79	;; Set an interrupt vector (not very efficient if multiple vectors are
80	;; programmed in one go)
81	SET_INT_VECTOR macro vec, segm, offs
82	mov ax, offs
83	mov ds:[vec*4], ax
84	mov ax, segm
85	mov ds:[vec*4+2], ax
86	endm
87
88	; Set up an environment C code expects. DS must point to the BIOS segment
89	; and the direction flag must be cleared(!)
90	C_SETUP macro
91	push cs
92	pop ds
93	cld
94	endm
95
96	;; External function in separate modules
97	extrn _dummy_isr_function:near
98	extrn _log_bios_start:near
99	extrn _nmi_handler_msg:near
100	extrn _int18_panic_msg:near
101	extrn _int09_function:near
102	extrn _int13_diskette_function:near
103	extrn _int13_eltorito:near
104	extrn _int13_cdemu:near
105	extrn _int13_cdrom:near
106	extrn _cdemu_isactive:near
107	extrn _cdemu_emulated_drive:near
108	extrn _int13_harddisk:near
109	extrn _int13_harddisk_ext:near
110	extrn _int14_function:near
111	extrn _int15_function:near
112	extrn _int15_function_mouse:near
113	extrn _int15_function32:near
114	extrn _int16_function:near
115	extrn _int17_function:near
116	extrn _int19_function:near
117	extrn _int1a_function:near
118	extrn _pci16_function:near
119	extrn _int70_function:near
120	extrn _int74_function:near
121	extrn _apm_function:near
122	extrn _ata_init:near
123	extrn _ahci_init:near
124	extrn _scsi_init:near
125	extrn _ata_detect:near
126	extrn _cdemu_init:near
127	extrn _keyboard_init:near
128	extrn _print_bios_banner:near
129	extrn _inv_op_handler:near
130	extrn rom_scan_:near
131
132
133	;; Symbols referenced from C code
134	public _diskette_param_table
135	public _pmode_IDT
136	public _rmode_IDT
137	public post
138	public eoi_both_pics
139	public rtc_post
140
141	;; Additional publics for easier disassembly and debugging
142	ifndef DEBUG
143	DEBUG equ 1
144	endif
145	ifdef DEBUG
146
147	public int08_handler
148	public int0e_handler
149	public int11_handler
150	public int12_handler
151	public int13_handler
152	public int13_relocated
153	public int15_handler
154	public int17_handler
155	public int19_handler
156	public int19_relocated
157	public dummy_iret
158	public nmi
159	public rom_fdpt
160	public cpu_reset
161	public normal_post
162	public eoi_jmp_post
163	public eoi_master_pic
164	public ebda_post
165	public hard_drive_post
166	public int13_legacy
167	public int70_handler
168	public int75_handler
169	public int15_handler32
170	public int15_handler_mouse
171	public iret_modify_cf
172	public init_pic
173	public floppy_post
174	public int13_out
175	public int13_disk
176	public int13_notfloppy
177	public int13_legacy
178	public int13_noeltorito
179	public int1c_handler
180	public int10_handler
181	public int74_handler
182	public int76_handler
183	public detect_parport
184	public detect_serial
185	public font8x8
186
187	endif
188
189	;; NOTE: The last 8K of the ROM BIOS are peppered with fixed locations which
190	;; must be retained for compatibility. As a consequence, some of the space is
191	;; going to be wasted, but the gaps should be filled with miscellaneous code
192	;; and data when possible.
193
194	.286p
195
196	BIOSSEG segment 'CODE'
197	assume cs:BIOSSEG
198
199	;;
200	;; Start of fixed code - eoi_jmp_post is kept near here to allow short jumps.
201	;;
202	BIOSORG 0E030h
203	eoi_both_pics:
204	mov al, PIC_CMD_EOI
205	out PIC_SLAVE, al
206	eoi_master_pic:
207	mov al, PIC_CMD_EOI
208	out PIC_MASTER, al
209	ret
210
211	;; routine to write the pointer in DX:AX to memory starting
212	;; at DS:BX (repeat CX times)
213	;; - modifies BX, CX
214	set_int_vects proc near
215
216	mov [bx], ax
217	mov [bx+2], dx
218	add bx, 4
219	loop set_int_vects
220	ret
221
222	set_int_vects endp
223
224	eoi_jmp_post:
225	call eoi_both_pics
226	xor ax, ax
227	mov ds, ax
228	jmp dword ptr ds:[0467h]
229
230	;; --------------------------------------------------------
231	;; POST entry point
232	;; --------------------------------------------------------
233	BIOSORG 0E05Bh
234	post:
235	cli
236
237	;; Check if in protected (V86) mode. If so, the CPU needs
238	;; to be reset.
239	smsw ax
240	test ax, 1
241	jz in_real_mode
242
243	;; Reset processor to get out of protected mode. Use system
244	;; port instead of KBC.
245	reset_sys:
246	mov al, 1
247	out 92h, al
248	jmp $ ; not strictly necessary in a VM
249
250
251	in_real_mode:
252	;; read the CMOS shutdown status
253	mov al, 0Fh
254	out CMOS_ADDR, al
255	in al, CMOS_DATA
256
257	;; save status
258	xchg ah, al
259
260	;; Check KBC self-test/shutdown flag. If it is set, we need
261	;; to check for a reboot attempt.
262	in al, 64h
263	test al, 4 ; clear flag indicates cold boot
264	jz cont_post
265
266	;; Warm boot, check the shutdown byte.
267	mov al, ah
268	or al, al
269	jnz cont_post
270
271	;; Warm boot but shutdown byte is zero. This is either a warm
272	;; boot request or an attempt to reset the system via triple
273	;; faulting the CPU or similar. Check reboot flag.
274	;; NB: At this point, registers need not be preserved.
275	push 40h
276	pop ds
277	cmp word ptr ds:[72h], 1234h
278	jnz reset_sys ; trigger system reset
279
280	cont_post:
281	;; reset the shutdown status in CMOS
282	mov al, 0Fh
283	out CMOS_ADDR, al
284	mov al, 0
285	out CMOS_DATA, al
286
287	;; pre-check the shutdown status - shutdown codes 9/A leave
288	;; the hardware alone
289	mov al, ah
290	cmp al, 09h
291	jz check_shutdown
292	cmp al, 0Ah
293	jz check_shutdown
294
295	xor al, al
296
297	;; reset the DMA controllers
298	out 00Dh, al
299	out 0DAh, al
300
301	;; then initialize the DMA controllers
302	mov al, 0C0h
303	out 0D6h, al ; enable channel 4 cascade
304	mov al, 0
305	out 0D4h, al ; unmask channel 4
306
307	check_shutdown:
308	;; examine the shutdown status code
309	mov al, ah
310	cmp al, 0
311	jz normal_post
312
313	cmp al, 0Dh
314	jae normal_post
315	cmp al, 9
316	jne check_next_std
317	jmp return_blkmove
318	check_next_std:
319
320	;; 05h = EOI + jump through 40:67
321	cmp al, 5
322	je eoi_jmp_post
323
324	;; any other shutdown status values are ignored
325	;; OpenSolaris sets the status to 0Ah in some cases?
326	jmp normal_post
327
328	normal_post:
329	;; shutdown code 0: normal startup
330
331	;; Set up the stack top at 0:7800h. The stack should not be
332	;; located above 0:7C00h; that conflicts with PXE, which
333	;; considers anything above that address to be fair game.
334	;; The traditional locations are 30:100 (PC) or 0:400 (PC/AT).
335	mov ax, 7800h
336	mov sp, ax
337	xor ax, ax
338	mov ds, ax
339	mov ss, ax
340
341	;; clear the bottom of memory except for the word at 40:72
342	;; TODO: Why not clear all of it? What's the point?
343	mov es, ax
344	xor di, di
345	cld
346	mov cx, 0472h / 2
347	rep stosw
348	inc di
349	inc di
350	mov cx, (1000h - 0472h - 2) / 2
351	rep stosw
352
353	;; clear the remaining base memory except for the top
354	;; of the EBDA (the MP table is planted there)
355	xor bx, bx
356	memory_zero_loop:
357	add bx, 1000h
358	cmp bx, 9000h
359	jae memory_cleared
360	mov es, bx
361	xor di, di
362	mov cx, 8000h ; 32K words
363	rep stosw
364	jmp memory_zero_loop
365	memory_cleared:
366	mov es, bx
367	xor di, di
368	mov cx, 7FF8h ; all but the last 16 bytes
369	rep stosw
370	xor bx, bx
371
372
373	C_SETUP
374	call _log_bios_start
375
376	call pmode_setup
377
378	;; set all interrupts in 00h-5Fh range to default handler
379	xor bx, bx
380	mov ds, bx
381	mov cx, 60h ; leave the rest as zeros
382	mov ax, dummy_iret
383	mov dx, BIOSSEG
384	call set_int_vects
385
386	;; also set 68h-77h to default handler; note that the
387	;; 60h-67h range must contain zeros for certain programs
388	;; to function correctly
389	mov bx, 68h * 4
390	mov cx, 10h
391	call set_int_vects
392
393	;; base memory in K to 40:13
394	mov ax, BASE_MEM_IN_K
395	mov ds:[413h], ax
396
397	;; manufacturing test at 40:12
398	;; zeroed out above
399
400	;; set up various service vectors
401	;; TODO: This should use the table at FEF3h instead
402	SET_INT_VECTOR 06h, BIOSSEG, int06_handler
403	SET_INT_VECTOR 11h, BIOSSEG, int11_handler
404	SET_INT_VECTOR 12h, BIOSSEG, int12_handler
405	SET_INT_VECTOR 15h, BIOSSEG, int15_handler
406	SET_INT_VECTOR 17h, BIOSSEG, int17_handler
407	SET_INT_VECTOR 18h, BIOSSEG, int18_handler
408	SET_INT_VECTOR 19h, BIOSSEG, int19_handler
409	SET_INT_VECTOR 1Ch, BIOSSEG, int1c_handler
410
411	call ebda_post
412
413	;; Initialize PCI devices. This can and should be done early.
414	call pcibios_init_iomem_bases
415	call pcibios_init_irqs
416	SET_INT_VECTOR 1Ah, BIOSSEG, int1a_handler
417
418	;; PIT setup
419	SET_INT_VECTOR 08h, BIOSSEG, int08_handler
420	mov al, 34h ; timer 0, binary, 16-bit, mode 2
421	out 43h, al
422	mov al, 0 ; max count -> ~18.2 Hz
423	out 40h, al
424	out 40h, al
425
426	;; video setup - must be done before POSTing VGA ROM
427	SET_INT_VECTOR 10h, BIOSSEG, int10_handler
428
429	;; keyboard setup
430	SET_INT_VECTOR 09h, BIOSSEG, int09_handler
431	SET_INT_VECTOR 16h, BIOSSEG, int16_handler
432
433	xor ax, ax
434	mov ds, ax
435	;; TODO: What's the point? The BDA is zeroed already?!
436	mov ds:[417h], al ; keyboard shift flags, set 1
437	mov ds:[418h], al ; keyboard shift flags, set 2
438	mov ds:[419h], al ; keyboard Alt-numpad work area
439	mov ds:[471h], al ; keyboard Ctrl-Break flag
440	mov ds:[497h], al ; keyboard status flags 4
441	mov al, 10h
442	mov ds:[496h], al ; keyboard status flags 3
443
444	mov bx, 1Eh
445	mov ds:[41Ah], bx ; keyboard buffer head
446	mov ds:[41Ch], bx ; keyboard buffer tail
447	mov ds:[480h], bx ; keyboard buffer start
448	mov bx, 3Eh
449	mov ds:[482h], bx ; keyboard buffer end
450
451	;; store CMOS equipment byte in BDA
452	mov al, 14h
453	out CMOS_ADDR, al
454	in al, CMOS_DATA
455	mov ds:[410h], al
456
457	push ds
458	C_SETUP
459
460	;; Scan for video ROMs in the C000-C800 range. This is done
461	;; early so that errors are displayed on the screen.
462	mov ax, 0C000h
463	mov dx, 0C800h
464	call rom_scan_
465
466	;; Initialize the keyboard
467	call _keyboard_init
468	pop ds
469
470	;; parallel setup
471	SET_INT_VECTOR 0Fh, BIOSSEG, dummy_iret
472	xor ax, ax
473	mov ds, ax
474	xor bx, bx
475	mov cl, 14h ; timeout value
476	mov dx, 378h ; parallel port 1
477	call detect_parport
478	mov dx, 278h ; parallel port 2
479	call detect_parport
480	shl bx, 0Eh
481	mov ax, ds:[410h] ; equipment word
482	and ax, 3FFFh
483	or ax, bx ; set number of parallel ports
484	mov ds:[410h], ax ; store in BDA
485
486	;; Serial setup
487	SET_INT_VECTOR 0Bh, BIOSSEG, dummy_isr
488	SET_INT_VECTOR 0Ch, BIOSSEG, dummy_isr
489	SET_INT_VECTOR 14h, BIOSSEG, int14_handler
490	xor bx, bx
491	mov cl, 0Ah ; timeout value
492	mov dx, 3F8h ; first serial address
493	call detect_serial
494	mov dx, 2F8h ; second serial address
495	call detect_serial
496	mov dx, 3E8h ; third serial address
497	call detect_serial
498	mov dx, 2E8h ; fourth serial address
499	call detect_serial
500	shl bx, 9
501	mov ax, ds:[410h] ; equipment word
502	and ax, 0F1FFh ; bits 9-11 determine serial ports
503	or ax, bx
504	mov ds:[410h], ax
505
506	;; CMOS RTC
507	SET_INT_VECTOR 4Ah, BIOSSEG, dummy_iret ; TODO: redundant?
508	SET_INT_VECTOR 70h, BIOSSEG, int70_handler
509	;; BIOS DATA AREA 4CEh ???
510	call rtc_post
511
512	jmp norm_post_cont
513
514
515	;; --------------------------------------------------------
516	;; NMI handler
517	;; --------------------------------------------------------
518	BIOSORG 0E2C3h
519	nmi:
520	C_SETUP
521	call _nmi_handler_msg
522	iret
523
524	int75_handler:
525	out 0F0h, al ; clear IRQ13
526	call eoi_both_pics
527	int 2 ; emulate legacy NMI
528	iret
529
530
531	hard_drive_post proc near
532
533	xor ax, ax
534	mov ds, ax
535	;; TODO: Didn't we just clear the entire EBDA?
536	mov ds:[474h], al ; last HD operation status
537	mov ds:[477h], al ; HD port offset (XT only???)
538	mov ds:[48Ch], al ; HD status register
539	mov ds:[48Dh], al ; HD error register
540	mov ds:[48Eh], al ; HD task complete flag
541	mov al, 0C0h
542	mov ds:[476h], al ; HD control byte
543	;; set up hard disk interrupt vectors
544	SET_INT_VECTOR 13h, BIOSSEG, int13_handler
545	SET_INT_VECTOR 76h, BIOSSEG, int76_handler
546	;; INT 41h/46h: hard disk 0/1 dpt
547	; TODO: This should be done from the code which
548	; builds the DPTs?
549	SET_INT_VECTOR 41h, EBDA_SEG, 3Dh
550	SET_INT_VECTOR 46h, EBDA_SEG, 4Dh
551	ret
552
553	hard_drive_post endp
554
555
556	norm_post_cont:
557	;; PS/2 mouse setup
558	SET_INT_VECTOR 74h, BIOSSEG, int74_handler
559
560	;; IRQ 13h (FPU exception) setup
561	SET_INT_VECTOR 75h, BIOSSEG, int75_handler
562
563	call init_pic
564
565	C_SETUP
566	;; ATA/ATAPI driver setup
567	call _ata_init
568	call _ata_detect
569
570	ifdef VBOX_WITH_AHCI
571	; AHCI driver setup
572	call _ahci_init
573	endif
574
575	ifdef VBOX_WITH_SCSI
576	; SCSI driver setup
577	call _scsi_init
578	endif
579
580	;; floppy setup
581	call floppy_post
582
583	;; hard drive setup
584	call hard_drive_post
585
586	C_SETUP ; in case assembly code changed things
587	call _print_bios_banner
588
589	;; Scan for additional ROMs in the C800-EFFF range
590	mov ax, 0C800h
591	mov dx, 0F000h
592	call rom_scan_
593
594	;; El Torito floppy/hard disk emulation
595	call _cdemu_init
596
597	; TODO: what's the point of enabling interrupts here??
598	sti ; enable interrupts
599	int 19h
600	;; does not return here
601	sti
602	wait_forever:
603	hlt
604	jmp wait_forever
605	cli
606	hlt
607
608
609	;;
610	;; Return from block move (shutdown code 09h). Care must be taken to disturb
611	;; register and memory state as little as possible.
612	;;
613	return_blkmove:
614	mov ax, 40h
615	mov ds, ax
616	;; restore user stack
617	mov ss, ds:[69h]
618	mov sp, ds:[67h]
619	;; reset A20 gate
620	in al, 92h
621	and al, 0FDh
622	out 92h, al
623	;; ensure proper real mode IDT
624	lidt fword ptr cs:_rmode_IDT
625	;; restore user segments
626	pop ds
627	pop es
628	;; set up BP
629	mov bp, sp
630	;; restore status code
631	in al, 80h
632	mov [bp+15], al
633	;; set ZF/CF
634	cmp ah,al ; AH is zero here!
635	;; restore registers and return
636	popa
637	sti
638	retf 2
639
640
641	;; --------------------------------------------------------
642	;; INT 13h handler - Disk services
643	;; --------------------------------------------------------
644	BIOSORG 0E3FEh
645
646	int13_handler:
647	jmp int13_relocated
648
649
650	;; --------------------------------------------------------
651	;; Fixed Disk Parameter Table
652	;; --------------------------------------------------------
653	;; BIOSORG 0E401h - fixed wrt preceding
654
655	rom_fdpt:
656
657	;; --------------------------------------------------------
658	;; INT 19h handler - Boot load service
659	;; --------------------------------------------------------
660	BIOSORG 0E6F2h
661
662	int19_handler:
663	jmp int19_relocated
664
665
666
667	;; --------------------------------------------------------
668	;; System BIOS Configuration Table
669	;; --------------------------------------------------------
670	;; BIOSORG 0E6F5h - fixed wrt preceding
671	; must match BIOS_CONFIG_TABLE
672	bios_cfg_table:
673	dw 9 ; table size in bytes
674	db SYS_MODEL_ID
675	db SYS_SUBMODEL_ID
676	db BIOS_REVISION
677	; Feature byte 1
678	; b7: 1=DMA channel 3 used by hard disk
679	; b6: 1=2 interrupt controllers present
680	; b5: 1=RTC present
681	; b4: 1=BIOS calls int 15h/4Fh for every key
682	; b3: 1=wait for extern event supported (Int 15h/41h)
683	; b2: 1=extended BIOS data area used
684	; b1: 0=AT or ESDI bus, 1=MicroChannel
685	; b0: 1=Dual bus (MicroChannel + ISA)
686	ifdef BX_CALL_INT15_4F
687	db 74h; or USE_EBDA
688	else
689	db 64h; or USE_EBDA
690	endif
691	; Feature byte 2
692	; b7: 1=32-bit DMA supported
693	; b6: 1=int16h, function 9 supported
694	; b5: 1=int15h/C6h (get POS data) supported
695	; b4: 1=int15h/C7h (get mem map info) supported
696	; b3: 1=int15h/C8h (en/dis CPU) supported
697	; b2: 1=non-8042 kb controller
698	; b1: 1=data streaming supported
699	; b0: reserved
700	db 40h
701	; Feature byte 3
702	; b7: not used
703	; b6: reserved
704	; b5: reserved
705	; b4: POST supports ROM-to-RAM enable/disable
706	; b3: SCSI on system board
707	; b2: info panel installed
708	; b1: Initial Machine Load (IML) system - BIOS on disk
709	; b0: SCSI supported in IML
710	db 0
711	; Feature byte 4
712	; b7: IBM private
713	; b6: EEPROM present
714	; b5-3: ABIOS presence (011 = not supported)
715	; b2: private
716	; b1: memory split above 16Mb supported
717	; b0: POSTEXT directly supported by POST
718	db 0
719	; Feature byte 5 (IBM)
720	; b1: enhanced mouse
721	; b0: flash EPROM
722	db 0
723
724
725	;; --------------------------------------------------------
726	;; Baud Rate Generator Table
727	;; --------------------------------------------------------
728	BIOSORG 0E729h
729
730
731	;; --------------------------------------------------------
732	;; INT 14h handler - Serial Communication Service
733	;; --------------------------------------------------------
734	BIOSORG 0E739h
735	int14_handler:
736	push ds
737	push es
738	pusha
739	C_SETUP
740	call _int14_function
741	popa
742	pop es
743	pop ds
744	iret
745
746
747
748	;;
749	;; Handler for unexpected hardware interrupts
750	;;
751	dummy_isr:
752	push ds
753	push es
754	pusha
755	C_SETUP
756	call _dummy_isr_function
757	popa
758	pop es
759	pop ds
760	iret
761
762
763	init_pic proc near
764
765	mov al, 11h ; send init commands
766	out PIC_MASTER, al
767	out PIC_SLAVE, al
768	mov al, 08h ; base 08h
769	out PIC_MASTER+1, al
770	mov al, 70h ; base 70h
771	out PIC_SLAVE+1, al
772	mov al, 04h ; master PIC
773	out PIC_MASTER+1, al
774	mov al, 02h ; slave PIC
775	out PIC_SLAVE+1, al
776	mov al, 01h
777	out PIC_MASTER+1, al
778	out PIC_SLAVE+1, al
779	mov al, 0B8h ; unmask IRQs 0/1/2/6
780	out PIC_MASTER+1, al
781	mov al, 08Fh
782	out PIC_SLAVE+1, al ; unmask IRQs 12/13/14
783	ret
784
785	init_pic endp
786
787	ebda_post proc near
788
789	SET_INT_VECTOR 0Dh, BIOSSEG, dummy_isr ; IRQ 5
790	SET_INT_VECTOR 0Fh, BIOSSEG, dummy_isr ; IRQ 7
791	SET_INT_VECTOR 72h, BIOSSEG, dummy_isr ; IRQ 11
792	SET_INT_VECTOR 77h, BIOSSEG, dummy_isr ; IRQ 15
793
794	mov ax, EBDA_SEG
795	mov ds, ax
796	mov byte ptr ds:[0], EBDA_SIZE
797	;; store EBDA seg in 40:0E
798	xor ax, ax
799	mov ds, ax
800	mov word ptr ds:[40Eh], EBDA_SEG
801	ret
802
803	ebda_post endp
804
805
806
807	;; --------------------------------------------------------
808	;; INT 16h handler - Keyboard service
809	;; --------------------------------------------------------
810	BIOSORG 0E82Eh
811	int16_handler:
812	sti
813	push es
814	push ds
815	pusha
816
817	cmp ah, 0
818	je int16_F00
819
820	cmp ah, 10h
821	je int16_F00
822
823	C_SETUP
824	call _int16_function
825	popa
826	pop ds
827	pop es
828	iret
829
830	int16_F00:
831	mov bx, 40h ; TODO: why 40h here and 0 elsewhere?
832	mov ds, bx
833	int16_wait_for_key:
834	cli
835	mov bx, ds:[1Ah]
836	cmp bx, ds:[1Ch]
837	jne int16_key_found
838	sti
839	nop
840	; TODO: review/enable?
841	if 0
842	push ax
843	mov ax, 9002h
844	int 15h
845	pop ax
846	endif
847	jmp int16_wait_for_key
848
849	int16_key_found:
850	C_SETUP
851	call _int16_function
852	popa
853	pop ds
854	pop es
855	; TODO: review/enable? If so, flags should be restored here?
856	if 0
857	push ax
858	mov ax, 9202h
859	int 15h
860	pop ax
861	endif
862	iret
863
864
865	;; Quick and dirty protected mode entry/exit routines
866	include pmode.inc
867
868	;; Initialization code which needs to run in protected mode (LAPIC etc.)
869	include pmsetup.inc
870
871
872	KBDC_DISABLE EQU 0ADh
873	KBDC_ENABLE EQU 0AEh
874	KBC_CMD EQU 64h
875	KBC_DATA EQU 60h
876
877	;; --------------------------------------------------------
878	;; INT 09h handler - Keyboard ISR (IRQ 1)
879	;; --------------------------------------------------------
880	BIOSORG 0E987h
881	int09_handler:
882	cli ; TODO: why? they're off already!
883	push ax
884	mov al, KBDC_DISABLE
885	out KBC_CMD, al
886
887	mov al, 0Bh
888	out PIC_MASTER, al
889	in al, PIC_MASTER
890	and al, 2
891	jz int09_finish
892
893	in al, KBC_DATA
894	push ds
895	pusha
896	cld ; Before INT 15h (and any C code)
897	ifdef BX_CALL_INT15_4F
898	mov ah, 4Fh
899	stc
900	int 15h ; keyboard intercept
901	jnc int09_done
902	endif
903	sti ; Only after calling INT 15h
904
905	;; check for extended key
906	cmp al, 0E0h
907	jne int09_check_pause
908	xor ax, ax
909	mov ds, ax
910	mov al, ds:[496h] ; mf2_state \|= 0x02
911	or al, 2 ; TODO: why not RMW?
912	mov ds:[496h], al
913	jmp int09_done
914
915	int09_check_pause:
916	cmp al, 0E1h ; pause key?
917	jne int09_process_key
918	xor ax, ax
919	mov ds, ax ; TODO: haven't we just done that??
920	mov al, ds:[496h]
921	or al, 1
922	mov ds:[496h], al ; TODO: why not RMW?
923	jmp int09_done
924
925	int09_process_key:
926	push es
927	C_SETUP
928	call _int09_function
929	pop es
930
931	int09_done:
932	popa
933	pop ds
934	cli
935	call eoi_master_pic
936
937	int09_finish:
938	mov al, KBDC_ENABLE
939	out KBC_CMD, al
940	pop ax
941	iret
942
943
944	;; --------------------------------------------------------
945	;; INT 06h handler - Invalid Opcode Exception
946	;; --------------------------------------------------------
947
948	int06_handler:
949	pusha
950	push es
951	push ds
952	C_SETUP
953	call _inv_op_handler
954	pop ds
955	pop es
956	popa
957	iret
958
959	;; --------------------------------------------------------
960	;; INT 13h handler - Diskette service
961	;; --------------------------------------------------------
962	BIOSORG 0EC59h
963	int13_diskette:
964	jmp int13_noeltorito
965
966
967
968	;; --------------------------------------------------------
969	;; INT 13h handler - Disk service
970	;; --------------------------------------------------------
971	int13_relocated:
972	;; check for an El-Torito function
973	cmp ah, 4Ah
974	jb int13_not_eltorito
975
976	cmp ah, 4Dh
977	ja int13_not_eltorito
978
979	pusha
980	push es
981	push ds
982	C_SETUP ; TODO: setup C envrionment only once?
983	push int13_out ; simulate a call
984	jmp _int13_eltorito ; ELDX not used
985
986	int13_not_eltorito:
987	push es
988	push ax ; TODO: better register save/restore
989	push bx
990	push cx
991	push dx
992
993	;; check if emulation is active
994	call _cdemu_isactive
995	cmp al, 0
996	je int13_cdemu_inactive
997
998	;; check if access to the emulated drive
999	call _cdemu_emulated_drive
1000	pop dx ; recover dx (destroyed by C code)
1001	push dx
1002	cmp al, dl ; INT 13h on emulated drive
1003	jne int13_nocdemu
1004
1005	pop dx
1006	pop cx
1007	pop bx
1008	pop ax
1009	pop es
1010
1011	pusha
1012	push es
1013	push ds
1014	C_SETUP ; TODO: setup environment only once?
1015
1016	push int13_out ; simulate a call
1017	jmp _int13_cdemu ; ELDX not used
1018
1019	int13_nocdemu:
1020	and dl, 0E0h ; mask to get device class
1021	cmp al, dl
1022	jne int13_cdemu_inactive
1023
1024	pop dx
1025	pop cx
1026	pop bx
1027	pop ax
1028	pop es
1029
1030	push ax
1031	push cx
1032	push dx
1033	push bx
1034
1035	dec dl ; real drive is dl - 1
1036	jmp int13_legacy
1037
1038	int13_cdemu_inactive:
1039	pop dx
1040	pop cx
1041	pop bx
1042	pop ax
1043	pop es
1044
1045	int13_noeltorito:
1046	push ax
1047	push cx
1048	push dx
1049	push bx
1050	int13_legacy:
1051	push dx ; push eltorito dx in place of sp
1052	push bp
1053	push si
1054	push di
1055	push es
1056	push ds
1057	C_SETUP ; TODO: setup environment only once?
1058
1059	;; now the registers can be restored with
1060	;; pop ds; pop es; popa; iret
1061	test dl, 80h ; non-removable?
1062	jnz int13_notfloppy
1063
1064	push int13_out ; simulate a near call
1065	jmp _int13_diskette_function
1066
1067	int13_notfloppy:
1068	cmp dl, 0E0h
1069	jb int13_notcdrom
1070
1071	;; ebx may be modified, save here
1072	;; TODO: check/review 32-bit register use
1073	.386
1074	shr ebx, 16
1075	push bx
1076	call _int13_cdrom
1077	pop bx
1078	shl ebx, 16
1079	.286
1080
1081	jmp int13_out
1082
1083	int13_notcdrom:
1084	int13_disk:
1085	cmp ah,40h
1086	ja int13x
1087	call _int13_harddisk
1088	jmp int13_out
1089
1090	int13x:
1091	call _int13_harddisk_ext
1092
1093	int13_out:
1094	pop ds
1095	pop es
1096	popa
1097	iret
1098
1099
1100
1101	; parallel port detection: port in dx, index in bx, timeout in cl
1102	detect_parport proc near
1103
1104	push dx
1105	inc dx
1106	inc dx
1107	in al, dx
1108	and al, 0DFh ; clear input mode
1109	out dx, al
1110	pop dx
1111	mov al, 0AAh
1112	out dx, al
1113	in al, dx
1114	cmp al, 0AAh
1115	jne no_parport
1116
1117	push bx
1118	shl bx, 1
1119	mov [bx+408h], dx ; parallel I/O address
1120	pop bx
1121	mov [bx+478h], cl ; parallel printer timeout
1122	inc bx
1123	no_parport:
1124	ret
1125
1126	detect_parport endp
1127
1128	; setial port detection: port in dx, index in bx, timeout in cl
1129	detect_serial proc near
1130
1131	push dx
1132	inc dx
1133	mov al, 2
1134	out dx, al
1135	in al, dx
1136	cmp al, 2
1137	jne no_serial
1138
1139	inc dx
1140	in al, dx
1141	cmp al, 2
1142	jne no_serial
1143
1144	dec dx
1145	xor al, al
1146	pop dx
1147	push bx
1148	shl bx, 1
1149	mov [bx+400h], dx ; serial I/O address
1150	pop bx
1151	mov [bx+47Ch], cl ; serial timeout
1152	inc bx
1153	ret
1154
1155	no_serial:
1156	pop dx
1157	ret
1158
1159	detect_serial endp
1160
1161
1162	;;
1163	;; POST: Floppy drive
1164	;;
1165	floppy_post proc near
1166
1167	xor ax, ax
1168	mov ds, ax
1169
1170	;; TODO: This code is really stupid. Zeroing the BDA byte
1171	;; by byte is dumb, and it's been already zeroed elsewhere!
1172	mov al, 0
1173	mov ds:[43Eh], al ; drive 0/1 uncalibrated, no IRQ
1174	mov ds:[43Fh], al ; motor status
1175	mov ds:[440h], al ; motor timeout counter
1176	mov ds:[441h], al ; controller status return code
1177	mov ds:[442h], al ; hd/floppy ctlr status register
1178	mov ds:[443h], al ; controller status register 1
1179	mov ds:[444h], al ; controller status register 2
1180	mov ds:[445h], al ; cylinder number
1181	mov ds:[446h], al ; head number
1182	mov ds:[447h], al ; sector number
1183	mov ds:[448h], al ; bytes written
1184
1185	mov ds:[48Bh], al ; configuration data
1186
1187	mov al, 10h ; floppy drive type
1188	out CMOS_ADDR, al
1189	in al, CMOS_DATA
1190	mov ah, al ; save drive type byte
1191
1192	look_drive0:
1193	; TODO: pre-init bl to reduce jumps
1194	shr al, 4 ; drive 0 in high nibble
1195	jz f0_missing ; jump if no drive
1196	mov bl, 7 ; drv0 determined, multi-rate, chgline
1197	jmp look_drive1
1198
1199	f0_missing:
1200	mov bl, 0 ; no drive 0
1201
1202	look_drive1:
1203	mov al, ah ; restore CMOS data
1204	and al, 0Fh ; drive 1 in low nibble
1205	jz f1_missing
1206	or bl, 70h ; drv1 determined, multi-rate, chgline
1207	f1_missing:
1208	mov ds:[48Fh], bl ; store in BDA
1209
1210	;; TODO: See above. Dumb and redundant!
1211	mov al, 0
1212	mov ds:[490h], al ; drv0 media state
1213	mov ds:[491h], al ; drv1 media state
1214	mov ds:[492h], al ; drv0 operational state
1215	mov ds:[493h], al ; drv1 operational state
1216	mov ds:[494h], al ; drv0 current cylinder
1217	mov ds:[495h], al ; drv1 current cylinder
1218
1219	mov al, 2
1220	out 0Ah, al ; unmask DMA channel 2
1221
1222	SET_INT_VECTOR 1Eh, BIOSSEG, _diskette_param_table
1223	SET_INT_VECTOR 40h, BIOSSEG, int13_diskette
1224	SET_INT_VECTOR 0Eh, BIOSSEG, int0e_handler ; IRQ 6
1225
1226	ret
1227
1228	floppy_post endp
1229
1230
1231	bcd_to_bin proc near
1232
1233	;; in : AL in packed BCD format
1234	;; out: AL in binary, AH always 0
1235	shl ax, 4
1236	shr al, 4
1237	aad
1238	ret
1239
1240	bcd_to_bin endp
1241
1242	rtc_post proc near
1243
1244	.386
1245	;; get RTC seconds
1246	xor eax, eax
1247	mov al, 0
1248	out CMOS_ADDR, al
1249	in al, CMOS_DATA ; RTC seconds, in BCD
1250	call bcd_to_bin ; eax now has seconds in binary
1251	mov edx, 18206507
1252	mul edx
1253	mov ebx, 1000000
1254	xor edx, edx
1255	div ebx
1256	mov ecx, eax ; total ticks in ecx
1257
1258	;; get RTC minutes
1259	xor eax, eax
1260	mov al, 2
1261	out CMOS_ADDR, al
1262	in al, CMOS_DATA ; RTC minutes, in BCD
1263	call bcd_to_bin ; eax now has minutes in binary
1264	mov edx, 10923904
1265	mul edx
1266	mov ebx, 10000
1267	xor edx, edx
1268	div ebx
1269	add ecx, eax ; add to total ticks
1270
1271	;; get RTC hours
1272	xor eax, eax
1273	mov al, 4
1274	out CMOS_ADDR, al
1275	in al, CMOS_DATA ; RTC hours, in BCD
1276	call bcd_to_bin ; eax now has hours in binary
1277	mov edx, 65543427
1278	mul edx
1279	mov ebx, 1000
1280	xor edx, edx
1281	div ebx
1282	add ecx, eax ; add to total ticks
1283
1284	mov ds:[46Ch], ecx ; timer tick count
1285	xor al, al ; TODO: redundant?
1286	mov ds:[470h], al ; rollover flag
1287	.286
1288	ret
1289
1290	rtc_post endp
1291
1292
1293
1294	;; --------------------------------------------------------
1295	;; INT 0Eh handler - Diskette IRQ 6 ISR
1296	;; --------------------------------------------------------
1297	BIOSORG 0EF57h
1298	int0e_handler:
1299	push ax
1300	push dx
1301	mov dx, 3F4h
1302	in al, dx
1303	and al, 0C0h
1304	cmp al, 0C0h
1305	je int0e_normal
1306	mov dx, 3F5h
1307	mov al, 08h ; sense interrupt
1308	out dx, al
1309	int0e_loop1:
1310	mov dx, 3F4h ; TODO: move out of the loop?
1311	in al, dx
1312	and al, 0C0h
1313	cmp al, 0C0h
1314	jne int0e_loop1
1315
1316	int0e_loop2:
1317	mov dx, 3F5h ; TODO: inc/dec dx instead
1318	in al, dx
1319	mov dx, 3F4h
1320	in al, dx
1321	and al, 0C0h
1322	cmp al, 0C0h
1323	je int0e_loop2
1324
1325	int0e_normal:
1326	push ds
1327	xor ax, ax
1328	mov ds, ax
1329	call eoi_master_pic
1330	; indicate that an interrupt occurred
1331	or byte ptr ds:[43Eh], 80h
1332	pop ds
1333	pop dx
1334	pop ax
1335	iret
1336
1337
1338	;; --------------------------------------------------------
1339	;; Diskette Parameter Table
1340	;; --------------------------------------------------------
1341	BIOSORG 0EFC7h
1342	_diskette_param_table:
1343	db 0AFh
1344	db 2 ; HLT=1, DMA mode
1345	db 025h
1346	db 2
1347	db 18 ; SPT (good for 1.44MB media)
1348	db 01Bh
1349	db 0FFh
1350	db 06Ch
1351	db 0F6h ; format filler
1352	db 15
1353	db 8
1354
1355
1356
1357	;; --------------------------------------------------------
1358	;; INT 17h handler - Printer service
1359	;; --------------------------------------------------------
1360	;; BIOSORG 0EFD2h - fixed WRT preceding code
1361
1362	jmp int17_handler ; NT floppy boot workaround
1363	; see @bugref{6481}
1364	int17_handler:
1365	push ds
1366	push es
1367	pusha
1368	C_SETUP
1369	call _int17_function
1370	popa
1371	pop es
1372	pop ds
1373	iret
1374
1375
1376
1377	;; Protected mode IDT descriptor
1378	;;
1379	;; The limit is 0 to cause a shutdown if an exception occurs
1380	;; in protected mode. TODO: Is that what we really want?
1381	;;
1382	;; Set base to F0000 to correspond to beginning of BIOS,
1383	;; in case an IDT is defined later.
1384
1385	_pmode_IDT:
1386	dw 0 ; limit 15:0
1387	dw 0 ; base 15:0
1388	dw 0Fh ; base 23:16
1389
1390
1391	;; Real mode IDT descriptor
1392	;;
1393	;; Set to typical real-mode values.
1394	;; base = 000000
1395	;; limit = 03ff
1396
1397	_rmode_IDT:
1398	dw 3FFh ; limit 15:00
1399	dw 0 ; base 15:00
1400	dw 0 ; base 23:16
1401
1402
1403	;;
1404	;; INT 1Ch
1405	;;
1406	;; TODO: Why does this need a special handler?
1407	int1c_handler: ;; user timer tick
1408	iret
1409
1410
1411
1412	;; --------------------------------------------------------
1413	;; INT 10h functions 0-Fh entry point
1414	;; --------------------------------------------------------
1415	BIOSORG 0F045h
1416	i10f0f_entry:
1417	iret
1418
1419
1420	;; --------------------------------------------------------
1421	;; INT 10h handler - MDA/CGA video
1422	;; --------------------------------------------------------
1423	BIOSORG 0F065h
1424	int10_handler:
1425	;; do nothing - assumes VGA
1426	iret
1427
1428
1429	;; --------------------------------------------------------
1430	;; MDA/CGA Video Parameter Table (INT 1Dh)
1431	;; --------------------------------------------------------
1432	BIOSORG 0F0A4h
1433	mdacga_vpt:
1434
1435
1436	;;
1437	;; INT 18h - boot failure
1438	;;
1439	int18_handler:
1440	C_SETUP
1441	call _int18_panic_msg
1442	;; TODO: handle failure better?
1443	hlt
1444	iret
1445
1446	;;
1447	;; INT 19h - boot service - relocated
1448	;;
1449	int19_relocated:
1450	; If an already booted OS calls int 0x19 to reboot, it is not sufficient
1451	; just to try booting from the configured drives. All BIOS variables and
1452	; interrupt vectors need to be reset, otherwise strange things may happen.
1453	; The approach used is faking a warm reboot (which just skips showing the
1454	; logo), which is a bit more than what we need, but hey, it's fast.
1455	mov bp, sp
1456	mov ax, [bp+2] ; TODO: redundant? address via sp?
1457	cmp ax, BIOSSEG ; check caller's segment
1458	jz bios_initiated_boot
1459
1460	xor ax, ax
1461	mov ds, ax
1462	mov ax, 1234h
1463	mov ds:[472], ax
1464	jmp post
1465
1466	bios_initiated_boot:
1467	;; The C worker function returns the boot drive in bl and
1468	;; the boot segment in ax. In case of failure, the boot
1469	;; segment will be zero.
1470	C_SETUP ; TODO: Here? Now?
1471	push bp
1472	mov bp, sp
1473
1474	;; 1st boot device
1475	mov ax, 1
1476	push ax
1477	call _int19_function
1478	inc sp
1479	inc sp
1480	test ax, ax ; if 0, try next device
1481	jnz boot_setup
1482
1483	;; 2nd boot device
1484	mov ax, 2
1485	push ax
1486	call _int19_function
1487	inc sp
1488	inc sp
1489	test ax, ax ; if 0, try next device
1490	jnz boot_setup
1491
1492	; 3rd boot device
1493	mov ax, 3
1494	push 3
1495	call _int19_function
1496	inc sp
1497	inc sp
1498	test ax, ax ; if 0, try next device
1499	jnz boot_setup
1500
1501	; 4th boot device
1502	mov ax, 4
1503	push ax
1504	call _int19_function
1505	inc sp
1506	inc sp
1507	test ax, ax ; if 0, invoke INT 18h
1508	jz int18_handler
1509
1510	boot_setup:
1511	; TODO: the drive should be in dl already??
1512	;; mov dl, bl ; tell guest OS what boot drive is
1513	.386 ; NB: We're getting garbage into high eax bits
1514	shl eax, 4 ; convert seg to ip
1515	mov [bp+2], ax ; set ip
1516
1517	shr eax, 4 ; get cs back
1518	.286
1519	and ax, BIOSSEG ; remove what went in ip
1520	mov [bp+4], ax ; set cs
1521	xor ax, ax
1522	mov ds, ax
1523	mov es, ax
1524	mov [bp], ax ; TODO: what's this?!
1525	mov ax, 0AA55h ; set ok flag ; TODO: and this?
1526
1527	pop bp ; TODO: why'd we just zero it??
1528	iret ; beam me up scotty
1529
1530	;; PCI BIOS
1531
1532	include pcibios.inc
1533	include pirq.inc
1534
1535
1536	;; --------------------------------------------------------
1537	;; INT 12h handler - Memory size
1538	;; --------------------------------------------------------
1539	BIOSORG 0F841h
1540	int12_handler:
1541	;; Don't touch - fixed size!
1542	sti
1543	push ds
1544	mov ax, 40h
1545	mov ds, ax
1546	mov ax, ds:[13h]
1547	pop ds
1548	iret
1549
1550
1551	;; --------------------------------------------------------
1552	;; INT 11h handler - Equipment list service
1553	;; --------------------------------------------------------
1554	;; BIOSORG 0F84Dh - fixed wrt preceding code
1555	int11_handler:
1556	;; Don't touch - fixed size!
1557	sti
1558	push ds
1559	mov ax, 40h
1560	mov ds, ax
1561	mov ax, ds:[10h]
1562	pop ds
1563	iret
1564
1565
1566	;; --------------------------------------------------------
1567	;; INT 15h handler - System services
1568	;; --------------------------------------------------------
1569	;; BIOSORG 0F859h - fixed wrt preceding code
1570	int15_handler:
1571	pushf
1572	push ds
1573	push es
1574	C_SETUP
1575	cmp ah, 86h
1576	je int15_handler32
1577	cmp ah, 0E8h
1578	je int15_handler32
1579	cmp ah, 0d0h
1580	je int15_handler32
1581	pusha
1582	cmp ah, 53h ; APM function?
1583	je apm_call
1584	cmp ah, 0C2h ; PS/2 mouse function?
1585	je int15_handler_mouse
1586
1587	call _int15_function
1588	int15_handler_popa_ret:
1589	popa
1590	int15_handler32_ret:
1591	pop es
1592	pop ds
1593	popf
1594	jmp iret_modify_cf
1595
1596	apm_call:
1597	call _apm_function
1598	jmp int15_handler_popa_ret
1599
1600	int15_handler_mouse:
1601	call _int15_function_mouse
1602	jmp int15_handler_popa_ret
1603
1604	int15_handler32:
1605	;; need to save/restore 32-bit registers
1606	.386
1607	pushad
1608	call _int15_function32
1609	popad
1610	.286
1611	jmp int15_handler32_ret
1612
1613	;;
1614	;; Perform an IRET but retain the current carry flag value
1615	;;
1616	iret_modify_cf:
1617	jc carry_set
1618	push bp
1619	mov bp, sp
1620	and byte ptr [bp + 6], 0FEh
1621	pop bp
1622	iret
1623	carry_set:
1624	push bp
1625	mov bp, sp
1626	or byte ptr [bp + 6], 1
1627	pop bp
1628	iret
1629
1630	;;
1631	;; INT 74h handler - PS/2 mouse (IRQ 12)
1632	;;
1633	int74_handler proc
1634
1635	sti
1636	pusha
1637	push es
1638	push ds
1639	push 0 ; placeholder for status
1640	push 0 ; placeholder for X
1641	push 0 ; placeholder for Y
1642	push 0 ; placeholder for Z
1643	push 0 ; placeholder for make_far_call bool
1644	C_SETUP
1645	call _int74_function
1646	pop cx ; pop make_far_call flag
1647	jcxz int74_done
1648
1649	;; make far call to EBDA:0022
1650	push 0
1651	pop ds
1652	push ds:[40Eh]
1653	pop ds
1654	call far ptr ds:[22h]
1655	int74_done:
1656	cli
1657	call eoi_both_pics
1658	add sp, 8 ; remove status, X, Y, Z
1659	pop ds
1660	pop es
1661	popa
1662	iret
1663
1664	int74_handler endp
1665
1666	int76_handler proc
1667
1668	;; record completion in BIOS task complete flag
1669	push ax
1670	push ds
1671	mov ax, 40h
1672	mov ds, ax
1673	mov byte ptr ds:[8Eh], 0FFh
1674	call eoi_both_pics
1675	pop ds
1676	pop ax
1677	iret
1678
1679	int76_handler endp
1680
1681	;; --------------------------------------------------------
1682	;; 8x8 font (first 128 characters)
1683	;; --------------------------------------------------------
1684	BIOSORG 0FA6Eh
1685	include font8x8.inc
1686
1687
1688	;; --------------------------------------------------------
1689	;; INT 1Ah handler - Time of the day + PCI BIOS
1690	;; --------------------------------------------------------
1691	;; BIOSORG 0FE6Eh - fixed wrt preceding table
1692	int1a_handler:
1693	cmp ah, 0B1h
1694	jne int1a_normal
1695
1696	push es
1697	push ds
1698	C_SETUP
1699	.386
1700	pushad
1701	call _pci16_function
1702	popad
1703	.286
1704	pop ds
1705	pop es
1706	iret
1707
1708	int1a_normal:
1709	push es
1710	push ds
1711	pusha
1712	C_SETUP
1713	int1a_callfunction:
1714	call _int1a_function
1715	popa
1716	pop ds
1717	pop es
1718	iret
1719
1720
1721	;;
1722	;; IRQ 8 handler (RTC)
1723	;;
1724	int70_handler:
1725	push es
1726	push ds
1727	pusha
1728	C_SETUP
1729	call _int70_function
1730	popa
1731	pop ds
1732	pop es
1733	iret
1734
1735
1736	;; --------------------------------------------------------
1737	;; Timer tick - IRQ 0 handler
1738	;; --------------------------------------------------------
1739	BIOSORG 0FEA5h
1740	int08_handler:
1741	.386
1742	sti
1743	push eax
1744	push ds
1745	push dx
1746	mov ax, 40h
1747	mov ds, ax
1748
1749	mov eax, ds:[6Ch] ; get ticks dword
1750	inc eax
1751
1752	;; compare eax to one day's worth of ticks (at 18.2 Hz)
1753	cmp eax, 1800B0h
1754	jb int08_store_ticks
1755	;; there has been a midnight rollover
1756	xor eax, eax
1757	inc byte ptr ds:[70h] ; increment rollover flag
1758
1759	int08_store_ticks:
1760	mov ds:[6Ch], eax
1761
1762	;; time to turn off floppy drive motor(s)?
1763	mov al, ds:[40h]
1764	or al, al
1765	jz int08_floppy_off
1766	dec al
1767	mov ds:[40h], al
1768	jnz int08_floppy_off
1769	;; turn motor(s) off
1770	mov dx, 03F2h
1771	in al, dx
1772	and al, 0CFh
1773	out dx, al
1774	int08_floppy_off:
1775
1776	int 1Ch ; call the user timer handler
1777
1778	cli
1779	call eoi_master_pic
1780	pop dx
1781	pop ds
1782	pop eax
1783	.286
1784	iret
1785
1786
1787	;; --------------------------------------------------------
1788	;; Initial interrupt vector offsets for POST
1789	;; --------------------------------------------------------
1790	BIOSORG 0FEF3h
1791	vector_table:
1792
1793
1794
1795	;; --------------------------------------------------------
1796	;; BIOS copyright string
1797	;; --------------------------------------------------------
1798	BIOSORG 0FF00h
1799	bios_string:
1800	db BIOS_COPYRIGHT
1801
1802
1803	;; --------------------------------------------------------
1804	;; IRET - default interrupt handler
1805	;; --------------------------------------------------------
1806	BIOSORG 0FF53h
1807
1808	dummy_iret:
1809	iret
1810
1811
1812	;; --------------------------------------------------------
1813	;; INT 05h - Print Screen service
1814	;; --------------------------------------------------------
1815	;; BIOSORG 0FF54h - fixed wrt preceding
1816	int05_handler:
1817	;; Not implemented
1818	iret
1819
1820	include smidmi.inc
1821
1822	;; --------------------------------------------------------
1823	;; Processor reset entry point
1824	;; --------------------------------------------------------
1825	BIOSORG 0FFF0h
1826	cpu_reset:
1827	;; This is where the CPU starts executing after a reset
1828	jmp far ptr post
1829
1830	;; BIOS build date
1831	db BIOS_BUILD_DATE
1832	db 0 ; padding
1833	;; System model ID
1834	db SYS_MODEL_ID
1835	;; Checksum byte
1836	db 0FFh
1837
1838
1839	BIOSSEG ends
1840
1841	end
1842

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/PC/BIOS/orgs.asm@ 53426

Download in other formats: