DevParallel.cpp@ 58143

Last change on this file since 58143 was 58132, checked in by vboxsync, 9 years ago
*: Doxygen fixes.
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 29.3 KB

Line
1	/* $Id: DevParallel.cpp 58132 2015-10-09 00:09:37Z vboxsync $ */
2	/** @file
3	* DevParallel - Parallel (Port) Device Emulation.
4	*
5	* Contributed by: Alexander Eichner
6	* Based on DevSerial.cpp
7	*/
8
9	/*
10	* Copyright (C) 2006-2015 Oracle Corporation
11	*
12	* This file is part of VirtualBox Open Source Edition (OSE), as
13	* available from http://www.virtualbox.org. This file is free software;
14	* you can redistribute it and/or modify it under the terms of the GNU
15	* General Public License (GPL) as published by the Free Software
16	* Foundation, in version 2 as it comes in the "COPYING" file of the
17	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
18	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
19	*/
20
21
22	/*********************************************************************************************************************************
23	* Header Files *
24	*********************************************************************************************************************************/
25	#define LOG_GROUP LOG_GROUP_DEV_PARALLEL
26	#include <VBox/vmm/pdmdev.h>
27	#include <iprt/assert.h>
28	#include <iprt/uuid.h>
29	#include <iprt/string.h>
30	#include <iprt/semaphore.h>
31
32	#include "VBoxDD.h"
33
34
35	/*********************************************************************************************************************************
36	* Defined Constants And Macros *
37	*********************************************************************************************************************************/
38	#define PARALLEL_SAVED_STATE_VERSION 1
39
40	/* defines for accessing the register bits */
41	#define LPT_STATUS_BUSY 0x80
42	#define LPT_STATUS_ACK 0x40
43	#define LPT_STATUS_PAPER_OUT 0x20
44	#define LPT_STATUS_SELECT_IN 0x10
45	#define LPT_STATUS_ERROR 0x08
46	#define LPT_STATUS_IRQ 0x04
47	#define LPT_STATUS_BIT1 0x02 /* reserved (only for completeness) */
48	#define LPT_STATUS_EPP_TIMEOUT 0x01
49
50	#define LPT_CONTROL_BIT7 0x80 /* reserved (only for completeness) */
51	#define LPT_CONTROL_BIT6 0x40 /* reserved (only for completeness) */
52	#define LPT_CONTROL_ENABLE_BIDIRECT 0x20
53	#define LPT_CONTROL_ENABLE_IRQ_VIA_ACK 0x10
54	#define LPT_CONTROL_SELECT_PRINTER 0x08
55	#define LPT_CONTROL_RESET 0x04
56	#define LPT_CONTROL_AUTO_LINEFEED 0x02
57	#define LPT_CONTROL_STROBE 0x01
58
59	/** mode defines for the extended control register */
60	#define LPT_ECP_ECR_CHIPMODE_MASK 0xe0
61	#define LPT_ECP_ECR_CHIPMODE_GET_BITS(reg) ((reg) >> 5)
62	#define LPT_ECP_ECR_CHIPMODE_SET_BITS(val) ((val) << 5)
63	#define LPT_ECP_ECR_CHIPMODE_CONFIGURATION 0x07
64	#define LPT_ECP_ECR_CHIPMODE_FIFO_TEST 0x06
65	#define LPT_ECP_ECR_CHIPMODE_RESERVED 0x05
66	#define LPT_ECP_ECR_CHIPMODE_EPP 0x04
67	#define LPT_ECP_ECR_CHIPMODE_ECP_FIFO 0x03
68	#define LPT_ECP_ECR_CHIPMODE_PP_FIFO 0x02
69	#define LPT_ECP_ECR_CHIPMODE_BYTE 0x01
70	#define LPT_ECP_ECR_CHIPMODE_COMPAT 0x00
71
72	/** FIFO status bits in extended control register */
73	#define LPT_ECP_ECR_FIFO_MASK 0x03
74	#define LPT_ECP_ECR_FIFO_SOME_DATA 0x00
75	#define LPT_ECP_ECR_FIFO_FULL 0x02
76	#define LPT_ECP_ECR_FIFO_EMPTY 0x01
77
78	#define LPT_ECP_CONFIGA_FIFO_WITDH_MASK 0x70
79	#define LPT_ECP_CONFIGA_FIFO_WIDTH_GET_BITS(reg) ((reg) >> 4)
80	#define LPT_ECP_CONFIGA_FIFO_WIDTH_SET_BITS(val) ((val) << 4)
81	#define LPT_ECP_CONFIGA_FIFO_WIDTH_16 0x00
82	#define LPT_ECP_CONFIGA_FIFO_WIDTH_32 0x20
83	#define LPT_ECP_CONFIGA_FIFO_WIDTH_8 0x10
84
85	#define LPT_ECP_FIFO_DEPTH 2
86
87
88	/*********************************************************************************************************************************
89	* Structures and Typedefs *
90	*********************************************************************************************************************************/
91	/**
92	* Parallel device state.
93	*
94	* @implements PDMIBASE
95	* @implements PDMIHOSTPARALLELPORT
96	*/
97	typedef struct PARALLELPORT
98	{
99	/** Pointer to the device instance - R3 Ptr */
100	PPDMDEVINSR3 pDevInsR3;
101	/** Pointer to the device instance - R0 Ptr */
102	PPDMDEVINSR0 pDevInsR0;
103	/** Pointer to the device instance - RC Ptr */
104	PPDMDEVINSRC pDevInsRC;
105	/** Alignment. */
106	RTRCPTR Alignment0;
107	/** LUN\#0: The base interface. */
108	PDMIBASE IBase;
109	/** LUN\#0: The host device port interface. */
110	PDMIHOSTPARALLELPORT IHostParallelPort;
111	/** Pointer to the attached base driver. */
112	R3PTRTYPE(PPDMIBASE) pDrvBase;
113	/** Pointer to the attached host device. */
114	R3PTRTYPE(PPDMIHOSTPARALLELCONNECTOR) pDrvHostParallelConnector;
115	/** Flag whether the device has its RC component enabled. */
116	bool fGCEnabled;
117	/** Flag whether the device has its R0 component enabled. */
118	bool fR0Enabled;
119	/** Flag whether an EPP timeout occurred (error handling). */
120	bool fEppTimeout;
121	/** Base I/O port of the parallel port. */
122	RTIOPORT IOBase;
123	/** IRQ number assigned ot the parallel port. */
124	int iIrq;
125	/** Data register. */
126	uint8_t regData;
127	/** Status register. */
128	uint8_t regStatus;
129	/** Control register. */
130	uint8_t regControl;
131	/** EPP address register. */
132	uint8_t regEppAddr;
133	/** EPP data register. */
134	uint8_t regEppData;
135	/** More alignment. */
136	uint32_t u32Alignment;
137
138	#if 0 /* Data for ECP implementation, currently unused. */
139	uint8_t reg_ecp_ecr;
140	uint8_t reg_ecp_base_plus_400h; /* has different meanings */
141	uint8_t reg_ecp_config_b;
142
143	/** The ECP FIFO implementation*/
144	uint8_t ecp_fifo[LPT_ECP_FIFO_DEPTH];
145	uint8_t abAlignemnt[2];
146	int act_fifo_pos_write;
147	int act_fifo_pos_read;
148	#endif
149	} PARALLELPORT, *PPARALLELPORT;
150
151	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
152
153	#define PDMIHOSTPARALLELPORT_2_PARALLELPORT(pInstance) ( (PARALLELPORT *)((uintptr_t)(pInterface) - RT_OFFSETOF(PARALLELPORT, IHostParallelPort)) )
154	#define PDMIHOSTDEVICEPORT_2_PARALLELPORT(pInstance) ( (PARALLELPORT *)((uintptr_t)(pInterface) - RT_OFFSETOF(PARALLELPORT, IHostDevicePort)) )
155	#define PDMIBASE_2_PARALLELPORT(pInstance) ( (PARALLELPORT *)((uintptr_t)(pInterface) - RT_OFFSETOF(PARALLELPORT, IBase)) )
156
157
158	/*********************************************************************************************************************************
159	* Internal Functions *
160	*********************************************************************************************************************************/
161	RT_C_DECLS_BEGIN
162	PDMBOTHCBDECL(int) parallelIOPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb);
163	PDMBOTHCBDECL(int) parallelIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
164	#if 0
165	PDMBOTHCBDECL(int) parallelIOPortReadECP(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb);
166	PDMBOTHCBDECL(int) parallelIOPortWriteECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb);
167	#endif
168	RT_C_DECLS_END
169
170
171	#ifdef IN_RING3
172	static void parallelR3IrqSet(PARALLELPORT *pThis)
173	{
174	if (pThis->regControl & LPT_CONTROL_ENABLE_IRQ_VIA_ACK)
175	{
176	LogFlowFunc(("%d 1\n", pThis->iIrq));
177	PDMDevHlpISASetIrqNoWait(pThis->CTX_SUFF(pDevIns), pThis->iIrq, 1);
178	}
179	}
180
181	static void parallelR3IrqClear(PARALLELPORT *pThis)
182	{
183	LogFlowFunc(("%d 0\n", pThis->iIrq));
184	PDMDevHlpISASetIrqNoWait(pThis->CTX_SUFF(pDevIns), pThis->iIrq, 0);
185	}
186	#endif
187
188	#if 0
189	static int parallel_ioport_write_ecp(void *opaque, uint32_t addr, uint32_t val)
190	{
191	PARALLELPORT s = (PARALLELPORT )opaque;
192	unsigned char ch;
193
194	addr &= 7;
195	LogFlow(("parallel: write ecp addr=0x%02x val=0x%02x\n", addr, val));
196	ch = val;
197	switch (addr) {
198	default:
199	case 0:
200	if (LPT_ECP_ECR_CHIPMODE_GET_BITS(s->reg_ecp_ecr) == LPT_ECP_ECR_CHIPMODE_FIFO_TEST) {
201	s->ecp_fifo[s->act_fifo_pos_write] = ch;
202	s->act_fifo_pos_write++;
203	if (s->act_fifo_pos_write < LPT_ECP_FIFO_DEPTH) {
204	/* FIFO has some data (clear both FIFO bits) */
205	s->reg_ecp_ecr &= ~(LPT_ECP_ECR_FIFO_EMPTY \| LPT_ECP_ECR_FIFO_FULL);
206	} else {
207	/* FIFO is full */
208	/* Clear FIFO empty bit */
209	s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_EMPTY;
210	/* Set FIFO full bit */
211	s->reg_ecp_ecr \|= LPT_ECP_ECR_FIFO_FULL;
212	s->act_fifo_pos_write = 0;
213	}
214	} else {
215	s->reg_ecp_base_plus_400h = ch;
216	}
217	break;
218	case 1:
219	s->reg_ecp_config_b = ch;
220	break;
221	case 2:
222	/* If we change the mode clear FIFO */
223	if ((ch & LPT_ECP_ECR_CHIPMODE_MASK) != (s->reg_ecp_ecr & LPT_ECP_ECR_CHIPMODE_MASK)) {
224	/* reset the fifo */
225	s->act_fifo_pos_write = 0;
226	s->act_fifo_pos_read = 0;
227	/* Set FIFO empty bit */
228	s->reg_ecp_ecr \|= LPT_ECP_ECR_FIFO_EMPTY;
229	/* Clear FIFO full bit */
230	s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_FULL;
231	}
232	/* Set new mode */
233	s->reg_ecp_ecr \|= LPT_ECP_ECR_CHIPMODE_SET_BITS(LPT_ECP_ECR_CHIPMODE_GET_BITS(ch));
234	break;
235	case 3:
236	break;
237	case 4:
238	break;
239	case 5:
240	break;
241	case 6:
242	break;
243	case 7:
244	break;
245	}
246	return VINF_SUCCESS;
247	}
248
249	static uint32_t parallel_ioport_read_ecp(void opaque, uint32_t addr, int pRC)
250	{
251	PARALLELPORT s = (PARALLELPORT )opaque;
252	uint32_t ret = ~0U;
253
254	*pRC = VINF_SUCCESS;
255
256	addr &= 7;
257	switch (addr) {
258	default:
259	case 0:
260	if (LPT_ECP_ECR_CHIPMODE_GET_BITS(s->reg_ecp_ecr) == LPT_ECP_ECR_CHIPMODE_FIFO_TEST) {
261	ret = s->ecp_fifo[s->act_fifo_pos_read];
262	s->act_fifo_pos_read++;
263	if (s->act_fifo_pos_read == LPT_ECP_FIFO_DEPTH)
264	s->act_fifo_pos_read = 0; /* end of FIFO, start at beginning */
265	if (s->act_fifo_pos_read == s->act_fifo_pos_write) {
266	/* FIFO is empty */
267	/* Set FIFO empty bit */
268	s->reg_ecp_ecr \|= LPT_ECP_ECR_FIFO_EMPTY;
269	/* Clear FIFO full bit */
270	s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_FULL;
271	} else {
272	/* FIFO has some data (clear all FIFO bits) */
273	s->reg_ecp_ecr &= ~(LPT_ECP_ECR_FIFO_EMPTY \| LPT_ECP_ECR_FIFO_FULL);
274	}
275	} else {
276	ret = s->reg_ecp_base_plus_400h;
277	}
278	break;
279	case 1:
280	ret = s->reg_ecp_config_b;
281	break;
282	case 2:
283	ret = s->reg_ecp_ecr;
284	break;
285	case 3:
286	break;
287	case 4:
288	break;
289	case 5:
290	break;
291	case 6:
292	break;
293	case 7:
294	break;
295	}
296	LogFlow(("parallel: read ecp addr=0x%02x val=0x%02x\n", addr, ret));
297	return ret;
298	}
299	#endif
300
301	#ifdef IN_RING3
302	/**
303	* @interface_method_impl{PDMIHOSTPARALLELPORT,pfnNotifyInterrupt}
304	*/
305	static DECLCALLBACK(int) parallelR3NotifyInterrupt(PPDMIHOSTPARALLELPORT pInterface)
306	{
307	PARALLELPORT *pThis = PDMIHOSTPARALLELPORT_2_PARALLELPORT(pInterface);
308
309	PDMCritSectEnter(pThis->pDevInsR3->pCritSectRoR3, VINF_SUCCESS);
310	parallelR3IrqSet(pThis);
311	PDMCritSectLeave(pThis->pDevInsR3->pCritSectRoR3);
312
313	return VINF_SUCCESS;
314	}
315	#endif /* IN_RING3 */
316
317
318	/**
319	* @callback_method_impl{FNIOMIOPORTOUT}
320	*/
321	PDMBOTHCBDECL(int) parallelIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
322	{
323	PARALLELPORT *pThis = PDMINS_2_DATA(pDevIns, PPARALLELPORT);
324	int rc = VINF_SUCCESS;
325
326	if (cb == 1)
327	{
328	uint8_t u8 = u32;
329
330	Log2(("%s: port %#06x val %#04x\n", __FUNCTION__, Port, u32));
331
332	Port &= 7;
333	switch (Port)
334	{
335	case 0:
336	#ifndef IN_RING3
337	NOREF(u8);
338	rc = VINF_IOM_R3_IOPORT_WRITE;
339	#else
340	pThis->regData = u8;
341	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
342	{
343	LogFlowFunc(("Set data lines 0x%X\n", u8));
344	rc = pThis->pDrvHostParallelConnector->pfnWrite(pThis->pDrvHostParallelConnector, &u8, 1, PDM_PARALLEL_PORT_MODE_SPP);
345	AssertRC(rc);
346	}
347	#endif
348	break;
349	case 1:
350	break;
351	case 2:
352	/* Set the reserved bits to one */
353	u8 \|= (LPT_CONTROL_BIT6 \| LPT_CONTROL_BIT7);
354	if (u8 != pThis->regControl)
355	{
356	#ifndef IN_RING3
357	return VINF_IOM_R3_IOPORT_WRITE;
358	#else
359	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
360	{
361	/* Set data direction. */
362	if (u8 & LPT_CONTROL_ENABLE_BIDIRECT)
363	rc = pThis->pDrvHostParallelConnector->pfnSetPortDirection(pThis->pDrvHostParallelConnector, false /* fForward */);
364	else
365	rc = pThis->pDrvHostParallelConnector->pfnSetPortDirection(pThis->pDrvHostParallelConnector, true /* fForward */);
366	AssertRC(rc);
367
368	u8 &= ~LPT_CONTROL_ENABLE_BIDIRECT; /* Clear bit. */
369
370	rc = pThis->pDrvHostParallelConnector->pfnWriteControl(pThis->pDrvHostParallelConnector, u8);
371	AssertRC(rc);
372	}
373	else
374	u8 &= ~LPT_CONTROL_ENABLE_BIDIRECT; /* Clear bit. */
375
376	pThis->regControl = u8;
377	#endif
378	}
379	break;
380	case 3:
381	#ifndef IN_RING3
382	NOREF(u8);
383	rc = VINF_IOM_R3_IOPORT_WRITE;
384	#else
385	pThis->regEppAddr = u8;
386	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
387	{
388	LogFlowFunc(("Write EPP address 0x%X\n", u8));
389	rc = pThis->pDrvHostParallelConnector->pfnWrite(pThis->pDrvHostParallelConnector, &u8, 1, PDM_PARALLEL_PORT_MODE_EPP_ADDR);
390	AssertRC(rc);
391	}
392	#endif
393	break;
394	case 4:
395	#ifndef IN_RING3
396	NOREF(u8);
397	rc = VINF_IOM_R3_IOPORT_WRITE;
398	#else
399	pThis->regEppData = u8;
400	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
401	{
402	LogFlowFunc(("Write EPP data 0x%X\n", u8));
403	rc = pThis->pDrvHostParallelConnector->pfnWrite(pThis->pDrvHostParallelConnector, &u8, 1, PDM_PARALLEL_PORT_MODE_EPP_DATA);
404	AssertRC(rc);
405	}
406	#endif
407	break;
408	case 5:
409	break;
410	case 6:
411	break;
412	case 7:
413	default:
414	break;
415	}
416	}
417	else
418	AssertMsgFailed(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32));
419
420	return rc;
421	}
422
423
424	/**
425	* @callback_method_impl{FNIOMIOPORTIN}
426	*/
427	PDMBOTHCBDECL(int) parallelIOPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
428	{
429	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
430	int rc = VINF_SUCCESS;
431
432	if (cb == 1)
433	{
434	Port &= 7;
435	switch (Port)
436	{
437	case 0:
438	if (!(pThis->regControl & LPT_CONTROL_ENABLE_BIDIRECT))
439	*pu32 = pThis->regData;
440	else
441	{
442	#ifndef IN_RING3
443	rc = VINF_IOM_R3_IOPORT_READ;
444	#else
445	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
446	{
447	rc = pThis->pDrvHostParallelConnector->pfnRead(pThis->pDrvHostParallelConnector, &pThis->regData,
448	1, PDM_PARALLEL_PORT_MODE_SPP);
449	Log(("Read data lines 0x%X\n", pThis->regData));
450	AssertRC(rc);
451	}
452	*pu32 = pThis->regData;
453	#endif
454	}
455	break;
456	case 1:
457	#ifndef IN_RING3
458	rc = VINF_IOM_R3_IOPORT_READ;
459	#else
460	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
461	{
462	rc = pThis->pDrvHostParallelConnector->pfnReadStatus(pThis->pDrvHostParallelConnector, &pThis->regStatus);
463	AssertRC(rc);
464	}
465	*pu32 = pThis->regStatus;
466	parallelR3IrqClear(pThis);
467	#endif
468	break;
469	case 2:
470	#ifndef IN_RING3
471	rc = VINF_IOM_R3_IOPORT_READ;
472	#else
473	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
474	{
475	rc = pThis->pDrvHostParallelConnector->pfnReadControl(pThis->pDrvHostParallelConnector, &pThis->regControl);
476	AssertRC(rc);
477	pThis->regControl \|= LPT_CONTROL_BIT6 \| LPT_CONTROL_BIT7;
478	}
479
480	*pu32 = pThis->regControl;
481	#endif
482	break;
483	case 3:
484	#ifndef IN_RING3
485	rc = VINF_IOM_R3_IOPORT_READ;
486	#else
487	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
488	{
489	rc = pThis->pDrvHostParallelConnector->pfnRead(pThis->pDrvHostParallelConnector, &pThis->regEppAddr,
490	1, PDM_PARALLEL_PORT_MODE_EPP_ADDR);
491	Log(("Read EPP address 0x%X\n", pThis->regEppAddr));
492	AssertRC(rc);
493	}
494	*pu32 = pThis->regEppAddr;
495	#endif
496	break;
497	case 4:
498	#ifndef IN_RING3
499	rc = VINF_IOM_R3_IOPORT_READ;
500	#else
501	if (RT_LIKELY(pThis->pDrvHostParallelConnector))
502	{
503	rc = pThis->pDrvHostParallelConnector->pfnRead(pThis->pDrvHostParallelConnector, &pThis->regEppData,
504	1, PDM_PARALLEL_PORT_MODE_EPP_DATA);
505	Log(("Read EPP data 0x%X\n", pThis->regEppData));
506	AssertRC(rc);
507	}
508	*pu32 = pThis->regEppData;
509	#endif
510	break;
511	case 5:
512	break;
513	case 6:
514	break;
515	case 7:
516	break;
517	}
518	}
519	else
520	rc = VERR_IOM_IOPORT_UNUSED;
521
522	return rc;
523	}
524
525	#if 0
526	/**
527	* @callback_method_impl{FNIOMIOPORTOUT, ECP registers.}
528	*/
529	PDMBOTHCBDECL(int) parallelIOPortWriteECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
530	{
531	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
532	int rc = VINF_SUCCESS;
533
534	if (cb == 1)
535	{
536	Log2(("%s: ecp port %#06x val %#04x\n", __FUNCTION__, Port, u32));
537	rc = parallel_ioport_write_ecp (pThis, Port, u32);
538	}
539	else
540	AssertMsgFailed(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32));
541
542	return rc;
543	}
544
545	/**
546	* @callback_method_impl{FNIOMIOPORTOUT, ECP registers.}
547	*/
548	PDMBOTHCBDECL(int) parallelIOPortReadECP(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
549	{
550	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
551	int rc = VINF_SUCCESS;
552
553	if (cb == 1)
554	{
555	*pu32 = parallel_ioport_read_ecp (pThis, Port, &rc);
556	Log2(("%s: ecp port %#06x val %#04x\n", __FUNCTION__, Port, *pu32));
557	}
558	else
559	rc = VERR_IOM_IOPORT_UNUSED;
560
561	return rc;
562	}
563	#endif
564
565	#ifdef IN_RING3
566
567	/**
568	* @callback_method_impl{FNSSMDEVLIVEEXEC}
569	*/
570	static DECLCALLBACK(int) parallelR3LiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass)
571	{
572	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
573
574	SSMR3PutS32(pSSM, pThis->iIrq);
575	SSMR3PutU32(pSSM, pThis->IOBase);
576	SSMR3PutU32(pSSM, ~0); /* sanity/terminator */
577	return VINF_SSM_DONT_CALL_AGAIN;
578	}
579
580
581	/**
582	* @callback_method_impl{FNSSMDEVSAVEEXEC}
583	*/
584	static DECLCALLBACK(int) parallelR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM)
585	{
586	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
587
588	SSMR3PutU8(pSSM, pThis->regData);
589	SSMR3PutU8(pSSM, pThis->regStatus);
590	SSMR3PutU8(pSSM, pThis->regControl);
591
592	parallelR3LiveExec(pDevIns, pSSM, 0);
593	return VINF_SUCCESS;
594	}
595
596
597	/**
598	* @callback_method_impl{FNSSMDEVLOADEXEC}
599	*/
600	static DECLCALLBACK(int) parallelR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass)
601	{
602	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
603
604	AssertMsgReturn(uVersion == PARALLEL_SAVED_STATE_VERSION, ("%d\n", uVersion), VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION);
605	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
606	if (uPass == SSM_PASS_FINAL)
607	{
608	SSMR3GetU8(pSSM, &pThis->regData);
609	SSMR3GetU8(pSSM, &pThis->regStatus);
610	SSMR3GetU8(pSSM, &pThis->regControl);
611	}
612
613	/* the config */
614	int32_t iIrq;
615	SSMR3GetS32(pSSM, &iIrq);
616	uint32_t uIoBase;
617	SSMR3GetU32(pSSM, &uIoBase);
618	uint32_t u32;
619	int rc = SSMR3GetU32(pSSM, &u32);
620	if (RT_FAILURE(rc))
621	return rc;
622	AssertMsgReturn(u32 == ~0U, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED);
623
624	if (pThis->iIrq != iIrq)
625	return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("IRQ changed: config=%#x state=%#x"), pThis->iIrq, iIrq);
626
627	if (pThis->IOBase != uIoBase)
628	return SSMR3SetCfgError(pSSM, RT_SRC_POS, N_("IOBase changed: config=%#x state=%#x"), pThis->IOBase, uIoBase);
629
630	/* not necessary... but it doesn't harm. */
631	pThis->pDevInsR3 = pDevIns;
632	pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
633	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
634	return VINF_SUCCESS;
635	}
636
637
638	/**
639	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
640	*/
641	static DECLCALLBACK(void ) parallelR3QueryInterface(PPDMIBASE pInterface, const char pszIID)
642	{
643	PARALLELPORT *pThis = PDMIBASE_2_PARALLELPORT(pInterface);
644	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->IBase);
645	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIHOSTPARALLELPORT, &pThis->IHostParallelPort);
646	return NULL;
647	}
648
649
650	/**
651	* @copydoc FNPDMDEVRELOCATE
652	*/
653	static DECLCALLBACK(void) parallelR3Relocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
654	{
655	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT );
656	pThis->pDevInsRC += offDelta;
657	}
658
659
660	/**
661	* @interface_method_impl{PDMDEVREG,pfnConstruct}
662	*/
663	static DECLCALLBACK(int) parallelR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
664	{
665	int rc;
666	PARALLELPORT pThis = PDMINS_2_DATA(pDevIns, PARALLELPORT);
667
668	Assert(iInstance < 4);
669	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
670
671	/*
672	* Init the data.
673	*/
674	pThis->pDevInsR3 = pDevIns;
675	pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
676	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
677
678	/* IBase */
679	pThis->IBase.pfnQueryInterface = parallelR3QueryInterface;
680
681	/* IHostParallelPort */
682	pThis->IHostParallelPort.pfnNotifyInterrupt = parallelR3NotifyInterrupt;
683
684	/* Init parallel state */
685	pThis->regData = 0;
686	#if 0 /* ECP implementation not complete. */
687	pThis->reg_ecp_ecr = LPT_ECP_ECR_CHIPMODE_COMPAT \| LPT_ECP_ECR_FIFO_EMPTY;
688	pThis->act_fifo_pos_read = 0;
689	pThis->act_fifo_pos_write = 0;
690	#endif
691
692	/*
693	* Validate and read the configuration.
694	*/
695	if (!CFGMR3AreValuesValid(pCfg, "IRQ\0" "IOBase\0" "GCEnabled\0" "R0Enabled\0"))
696	return PDMDEV_SET_ERROR(pDevIns, VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES,
697	N_("Configuration error: Unknown config key"));
698
699	rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &pThis->fGCEnabled, false);
700	if (RT_FAILURE(rc))
701	return PDMDEV_SET_ERROR(pDevIns, rc,
702	N_("Configuration error: Failed to get the \"GCEnabled\" value"));
703
704	rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &pThis->fR0Enabled, false);
705	if (RT_FAILURE(rc))
706	return PDMDEV_SET_ERROR(pDevIns, rc,
707	N_("Configuration error: Failed to get the \"R0Enabled\" value"));
708	rc = CFGMR3QueryS32Def(pCfg, "IRQ", &pThis->iIrq, 7);
709	if (RT_FAILURE(rc))
710	return PDMDEV_SET_ERROR(pDevIns, rc,
711	N_("Configuration error: Failed to get the \"IRQ\" value"));
712	rc = CFGMR3QueryU16Def(pCfg, "IOBase", &pThis->IOBase, 0x378);
713	if (RT_FAILURE(rc))
714	return PDMDEV_SET_ERROR(pDevIns, rc,
715	N_("Configuration error: Failed to get the \"IOBase\" value"));
716
717	/*
718	* Register the I/O ports and saved state.
719	*/
720	rc = PDMDevHlpIOPortRegister(pDevIns, pThis->IOBase, 8, 0,
721	parallelIOPortWrite, parallelIOPortRead,
722	NULL, NULL, "Parallel");
723	if (RT_FAILURE(rc))
724	return rc;
725
726	#if 0
727	/* register ecp registers */
728	rc = PDMDevHlpIOPortRegister(pDevIns, io_base+0x400, 8, 0,
729	parallelIOPortWriteECP, parallelIOPortReadECP,
730	NULL, NULL, "PARALLEL ECP");
731	if (RT_FAILURE(rc))
732	return rc;
733	#endif
734
735	if (pThis->fGCEnabled)
736	{
737	rc = PDMDevHlpIOPortRegisterRC(pDevIns, pThis->IOBase, 8, 0, "parallelIOPortWrite",
738	"parallelIOPortRead", NULL, NULL, "Parallel");
739	if (RT_FAILURE(rc))
740	return rc;
741
742	#if 0
743	rc = PDMDevHlpIOPortRegisterGC(pDevIns, io_base+0x400, 8, 0, "parallelIOPortWriteECP",
744	"parallelIOPortReadECP", NULL, NULL, "Parallel Ecp");
745	if (RT_FAILURE(rc))
746	return rc;
747	#endif
748	}
749
750	if (pThis->fR0Enabled)
751	{
752	rc = PDMDevHlpIOPortRegisterR0(pDevIns, pThis->IOBase, 8, 0, "parallelIOPortWrite",
753	"parallelIOPortRead", NULL, NULL, "Parallel");
754	if (RT_FAILURE(rc))
755	return rc;
756
757	#if 0
758	rc = PDMDevHlpIOPortRegisterR0(pDevIns, io_base+0x400, 8, 0, "parallelIOPortWriteECP",
759	"parallelIOPortReadECP", NULL, NULL, "Parallel Ecp");
760	if (RT_FAILURE(rc))
761	return rc;
762	#endif
763	}
764
765	rc = PDMDevHlpSSMRegister3(pDevIns, PARALLEL_SAVED_STATE_VERSION, sizeof(*pThis),
766	parallelR3LiveExec, parallelR3SaveExec, parallelR3LoadExec);
767	if (RT_FAILURE(rc))
768	return rc;
769
770
771	/*
772	* Attach the parallel port driver and get the interfaces.
773	* For now no run-time changes are supported.
774	*/
775	rc = PDMDevHlpDriverAttach(pDevIns, 0, &pThis->IBase, &pThis->pDrvBase, "Parallel Host");
776	if (RT_SUCCESS(rc))
777	{
778	pThis->pDrvHostParallelConnector = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMIHOSTPARALLELCONNECTOR);
779
780	/* Set compatibility mode */
781	//pThis->pDrvHostParallelConnector->pfnSetMode(pThis->pDrvHostParallelConnector, PDM_PARALLEL_PORT_MODE_COMPAT);
782	/* Get status of control register */
783	pThis->pDrvHostParallelConnector->pfnReadControl(pThis->pDrvHostParallelConnector, &pThis->regControl);
784
785	AssertMsgReturn(pThis->pDrvHostParallelConnector,
786	("Configuration error: instance %d has no host parallel interface!\n", iInstance),
787	VERR_PDM_MISSING_INTERFACE);
788	}
789	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
790	{
791	pThis->pDrvBase = NULL;
792	pThis->pDrvHostParallelConnector = NULL;
793	LogRel(("Parallel%d: no unit\n", iInstance));
794	}
795	else
796	{
797	AssertMsgFailed(("Parallel%d: Failed to attach to host driver. rc=%Rrc\n", iInstance, rc));
798	return PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS,
799	N_("Parallel device %d cannot attach to host driver"), iInstance);
800	}
801
802	return VINF_SUCCESS;
803	}
804
805	/**
806	* The device registration structure.
807	*/
808	const PDMDEVREG g_DeviceParallelPort =
809	{
810	/* u32Version */
811	PDM_DEVREG_VERSION,
812	/* szName */
813	"parallel",
814	/* szRCMod */
815	"VBoxDDRC.rc",
816	/* szR0Mod */
817	"VBoxDDR0.r0",
818	/* pszDescription */
819	"Parallel Communication Port",
820	/* fFlags */
821	PDM_DEVREG_FLAGS_DEFAULT_BITS \| PDM_DEVREG_FLAGS_RC \| PDM_DEVREG_FLAGS_R0,
822	/* fClass */
823	PDM_DEVREG_CLASS_PARALLEL,
824	/* cMaxInstances */
825	2,
826	/* cbInstance */
827	sizeof(PARALLELPORT),
828	/* pfnConstruct */
829	parallelR3Construct,
830	/* pfnDestruct */
831	NULL,
832	/* pfnRelocate */
833	parallelR3Relocate,
834	/* pfnMemSetup */
835	NULL,
836	/* pfnPowerOn */
837	NULL,
838	/* pfnReset */
839	NULL,
840	/* pfnSuspend */
841	NULL,
842	/* pfnResume */
843	NULL,
844	/* pfnAttach */
845	NULL,
846	/* pfnDetach */
847	NULL,
848	/* pfnQueryInterface. */
849	NULL,
850	/* pfnInitComplete */
851	NULL,
852	/* pfnPowerOff */
853	NULL,
854	/* pfnSoftReset */
855	NULL,
856	/* u32VersionEnd */
857	PDM_DEVREG_VERSION
858	};
859	#endif /* IN_RING3 */
860
861
862	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Parallel/DevParallel.cpp@ 58143

Download in other formats: