DevParallel.cpp@ 86692

Last change on this file since 86692 was 82968, checked in by vboxsync, 5 years ago
Copyright year updates by scm.
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 29.4 KB

Line
1	/* $Id: DevParallel.cpp 82968 2020-02-04 10:35:17Z vboxsync $ */
2	/** @file
3	* DevParallel - Parallel (Port) Device Emulation.
4	*
5	* Contributed by: Alexander Eichner
6	* Based on DevSerial.cpp
7	*/
8
9	/*
10	* Copyright (C) 2006-2020 Oracle Corporation
11	*
12	* This file is part of VirtualBox Open Source Edition (OSE), as
13	* available from http://www.virtualbox.org. This file is free software;
14	* you can redistribute it and/or modify it under the terms of the GNU
15	* General Public License (GPL) as published by the Free Software
16	* Foundation, in version 2 as it comes in the "COPYING" file of the
17	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
18	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
19	*/
20
21
22	/*********************************************************************************************************************************
23	* Header Files *
24	*********************************************************************************************************************************/
25	#define LOG_GROUP LOG_GROUP_DEV_PARALLEL
26	#include <VBox/vmm/pdmdev.h>
27	#include <VBox/AssertGuest.h>
28	#include <iprt/assert.h>
29	#include <iprt/uuid.h>
30	#include <iprt/string.h>
31	#include <iprt/semaphore.h>
32
33	#include "VBoxDD.h"
34
35
36	/*********************************************************************************************************************************
37	* Defined Constants And Macros *
38	*********************************************************************************************************************************/
39	#define PARALLEL_SAVED_STATE_VERSION 1
40
41	/* defines for accessing the register bits */
42	#define LPT_STATUS_BUSY 0x80
43	#define LPT_STATUS_ACK 0x40
44	#define LPT_STATUS_PAPER_OUT 0x20
45	#define LPT_STATUS_SELECT_IN 0x10
46	#define LPT_STATUS_ERROR 0x08
47	#define LPT_STATUS_IRQ 0x04
48	#define LPT_STATUS_BIT1 0x02 /* reserved (only for completeness) */
49	#define LPT_STATUS_EPP_TIMEOUT 0x01
50
51	#define LPT_CONTROL_BIT7 0x80 /* reserved (only for completeness) */
52	#define LPT_CONTROL_BIT6 0x40 /* reserved (only for completeness) */
53	#define LPT_CONTROL_ENABLE_BIDIRECT 0x20
54	#define LPT_CONTROL_ENABLE_IRQ_VIA_ACK 0x10
55	#define LPT_CONTROL_SELECT_PRINTER 0x08
56	#define LPT_CONTROL_RESET 0x04
57	#define LPT_CONTROL_AUTO_LINEFEED 0x02
58	#define LPT_CONTROL_STROBE 0x01
59
60	/** mode defines for the extended control register */
61	#define LPT_ECP_ECR_CHIPMODE_MASK 0xe0
62	#define LPT_ECP_ECR_CHIPMODE_GET_BITS(reg) ((reg) >> 5)
63	#define LPT_ECP_ECR_CHIPMODE_SET_BITS(val) ((val) << 5)
64	#define LPT_ECP_ECR_CHIPMODE_CONFIGURATION 0x07
65	#define LPT_ECP_ECR_CHIPMODE_FIFO_TEST 0x06
66	#define LPT_ECP_ECR_CHIPMODE_RESERVED 0x05
67	#define LPT_ECP_ECR_CHIPMODE_EPP 0x04
68	#define LPT_ECP_ECR_CHIPMODE_ECP_FIFO 0x03
69	#define LPT_ECP_ECR_CHIPMODE_PP_FIFO 0x02
70	#define LPT_ECP_ECR_CHIPMODE_BYTE 0x01
71	#define LPT_ECP_ECR_CHIPMODE_COMPAT 0x00
72
73	/** FIFO status bits in extended control register */
74	#define LPT_ECP_ECR_FIFO_MASK 0x03
75	#define LPT_ECP_ECR_FIFO_SOME_DATA 0x00
76	#define LPT_ECP_ECR_FIFO_FULL 0x02
77	#define LPT_ECP_ECR_FIFO_EMPTY 0x01
78
79	#define LPT_ECP_CONFIGA_FIFO_WITDH_MASK 0x70
80	#define LPT_ECP_CONFIGA_FIFO_WIDTH_GET_BITS(reg) ((reg) >> 4)
81	#define LPT_ECP_CONFIGA_FIFO_WIDTH_SET_BITS(val) ((val) << 4)
82	#define LPT_ECP_CONFIGA_FIFO_WIDTH_16 0x00
83	#define LPT_ECP_CONFIGA_FIFO_WIDTH_32 0x20
84	#define LPT_ECP_CONFIGA_FIFO_WIDTH_8 0x10
85
86	#define LPT_ECP_FIFO_DEPTH 2
87
88
89	/*********************************************************************************************************************************
90	* Structures and Typedefs *
91	*********************************************************************************************************************************/
92	/**
93	* The shared parallel device state.
94	*/
95	typedef struct PARALLELPORT
96	{
97	/** Flag whether an EPP timeout occurred (error handling). */
98	bool fEppTimeout;
99	bool fAlignment1;
100	/** Base I/O port of the parallel port. */
101	RTIOPORT IOBase;
102	/** IRQ number assigned ot the parallel port. */
103	int32_t iIrq;
104	/** Data register. */
105	uint8_t regData;
106	/** Status register. */
107	uint8_t regStatus;
108	/** Control register. */
109	uint8_t regControl;
110	/** EPP address register. */
111	uint8_t regEppAddr;
112	/** EPP data register. */
113	uint8_t regEppData;
114	/** More alignment. */
115	uint8_t abAlignment2[3];
116
117	#if 0 /* Data for ECP implementation, currently unused. */
118	uint8_t reg_ecp_ecr;
119	uint8_t reg_ecp_base_plus_400h; /* has different meanings */
120	uint8_t reg_ecp_config_b;
121
122	/** The ECP FIFO implementation*/
123	uint8_t ecp_fifo[LPT_ECP_FIFO_DEPTH];
124	uint8_t abAlignemnt[3];
125	int32_t act_fifo_pos_write;
126	int32_t act_fifo_pos_read;
127	#endif
128	/** Handle to the regular I/O ports. */
129	IOMIOPORTHANDLE hIoPorts;
130	/** Handle to the ECP I/O ports. */
131	IOMIOPORTHANDLE hIoPortsEcp;
132	} PARALLELPORT;
133	/** Pointer to the shared parallel device state. */
134	typedef PARALLELPORT *PPARALLELPORT;
135
136
137	/**
138	* The parallel device state for ring-3.
139	*
140	* @implements PDMIBASE
141	* @implements PDMIHOSTPARALLELPORT
142	*/
143	typedef struct PARALLELPORTR3
144	{
145	/** Pointer to the device instance.
146	* @note Only for getting our bearings when arriving here via an interface
147	* method. */
148	PPDMDEVINSR3 pDevIns;
149	/** LUN\#0: The base interface. */
150	PDMIBASE IBase;
151	/** LUN\#0: The host device port interface. */
152	PDMIHOSTPARALLELPORT IHostParallelPort;
153	/** Pointer to the attached base driver. */
154	R3PTRTYPE(PPDMIBASE) pDrvBase;
155	/** Pointer to the attached host device. */
156	R3PTRTYPE(PPDMIHOSTPARALLELCONNECTOR) pDrvHostParallelConnector;
157	} PARALLELPORTR3;
158	/** Pointer to the parallel device state for ring-3. */
159	typedef PARALLELPORTR3 *PPARALLELPORTR3;
160
161
162	#ifndef VBOX_DEVICE_STRUCT_TESTCASE /* Rest of file, does not count wrt indentation. */
163
164	#ifdef IN_RING3
165
166	static void parallelR3IrqSet(PPDMDEVINS pDevIns, PARALLELPORT *pThis)
167	{
168	if (pThis->regControl & LPT_CONTROL_ENABLE_IRQ_VIA_ACK)
169	{
170	LogFlowFunc(("%d 1\n", pThis->iIrq));
171	PDMDevHlpISASetIrqNoWait(pDevIns, pThis->iIrq, 1);
172	}
173	}
174
175	static void parallelR3IrqClear(PPDMDEVINS pDevIns, PARALLELPORT *pThis)
176	{
177	LogFlowFunc(("%d 0\n", pThis->iIrq));
178	PDMDevHlpISASetIrqNoWait(pDevIns, pThis->iIrq, 0);
179	}
180
181	#endif /* IN_RING3 */
182
183	#if 0
184	static int parallel_ioport_write_ecp(void *opaque, uint32_t addr, uint32_t val)
185	{
186	PARALLELPORT s = (PARALLELPORT )opaque;
187	unsigned char ch;
188
189	addr &= 7;
190	LogFlow(("parallel: write ecp addr=0x%02x val=0x%02x\n", addr, val));
191	ch = val;
192	switch (addr) {
193	default:
194	case 0:
195	if (LPT_ECP_ECR_CHIPMODE_GET_BITS(s->reg_ecp_ecr) == LPT_ECP_ECR_CHIPMODE_FIFO_TEST) {
196	s->ecp_fifo[s->act_fifo_pos_write] = ch;
197	s->act_fifo_pos_write++;
198	if (s->act_fifo_pos_write < LPT_ECP_FIFO_DEPTH) {
199	/* FIFO has some data (clear both FIFO bits) */
200	s->reg_ecp_ecr &= ~(LPT_ECP_ECR_FIFO_EMPTY \| LPT_ECP_ECR_FIFO_FULL);
201	} else {
202	/* FIFO is full */
203	/* Clear FIFO empty bit */
204	s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_EMPTY;
205	/* Set FIFO full bit */
206	s->reg_ecp_ecr \|= LPT_ECP_ECR_FIFO_FULL;
207	s->act_fifo_pos_write = 0;
208	}
209	} else {
210	s->reg_ecp_base_plus_400h = ch;
211	}
212	break;
213	case 1:
214	s->reg_ecp_config_b = ch;
215	break;
216	case 2:
217	/* If we change the mode clear FIFO */
218	if ((ch & LPT_ECP_ECR_CHIPMODE_MASK) != (s->reg_ecp_ecr & LPT_ECP_ECR_CHIPMODE_MASK)) {
219	/* reset the fifo */
220	s->act_fifo_pos_write = 0;
221	s->act_fifo_pos_read = 0;
222	/* Set FIFO empty bit */
223	s->reg_ecp_ecr \|= LPT_ECP_ECR_FIFO_EMPTY;
224	/* Clear FIFO full bit */
225	s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_FULL;
226	}
227	/* Set new mode */
228	s->reg_ecp_ecr \|= LPT_ECP_ECR_CHIPMODE_SET_BITS(LPT_ECP_ECR_CHIPMODE_GET_BITS(ch));
229	break;
230	case 3:
231	break;
232	case 4:
233	break;
234	case 5:
235	break;
236	case 6:
237	break;
238	case 7:
239	break;
240	}
241	return VINF_SUCCESS;
242	}
243
244	static uint32_t parallel_ioport_read_ecp(void opaque, uint32_t addr, int pRC)
245	{
246	PARALLELPORT s = (PARALLELPORT )opaque;
247	uint32_t ret = ~0U;
248
249	*pRC = VINF_SUCCESS;
250
251	addr &= 7;
252	switch (addr) {
253	default:
254	case 0:
255	if (LPT_ECP_ECR_CHIPMODE_GET_BITS(s->reg_ecp_ecr) == LPT_ECP_ECR_CHIPMODE_FIFO_TEST) {
256	ret = s->ecp_fifo[s->act_fifo_pos_read];
257	s->act_fifo_pos_read++;
258	if (s->act_fifo_pos_read == LPT_ECP_FIFO_DEPTH)
259	s->act_fifo_pos_read = 0; /* end of FIFO, start at beginning */
260	if (s->act_fifo_pos_read == s->act_fifo_pos_write) {
261	/* FIFO is empty */
262	/* Set FIFO empty bit */
263	s->reg_ecp_ecr \|= LPT_ECP_ECR_FIFO_EMPTY;
264	/* Clear FIFO full bit */
265	s->reg_ecp_ecr &= ~LPT_ECP_ECR_FIFO_FULL;
266	} else {
267	/* FIFO has some data (clear all FIFO bits) */
268	s->reg_ecp_ecr &= ~(LPT_ECP_ECR_FIFO_EMPTY \| LPT_ECP_ECR_FIFO_FULL);
269	}
270	} else {
271	ret = s->reg_ecp_base_plus_400h;
272	}
273	break;
274	case 1:
275	ret = s->reg_ecp_config_b;
276	break;
277	case 2:
278	ret = s->reg_ecp_ecr;
279	break;
280	case 3:
281	break;
282	case 4:
283	break;
284	case 5:
285	break;
286	case 6:
287	break;
288	case 7:
289	break;
290	}
291	LogFlow(("parallel: read ecp addr=0x%02x val=0x%02x\n", addr, ret));
292	return ret;
293	}
294	#endif
295
296	#ifdef IN_RING3
297	/**
298	* @interface_method_impl{PDMIHOSTPARALLELPORT,pfnNotifyInterrupt}
299	*/
300	static DECLCALLBACK(int) parallelR3NotifyInterrupt(PPDMIHOSTPARALLELPORT pInterface)
301	{
302	PPARALLELPORTR3 pThisCC = RT_FROM_MEMBER(pInterface, PARALLELPORTR3, IHostParallelPort);
303	PPDMDEVINS pDevIns = pThisCC->pDevIns;
304	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
305
306	PDMCritSectEnter(pDevIns->pCritSectRoR3, VINF_SUCCESS);
307	parallelR3IrqSet(pDevIns, pThis);
308	PDMCritSectLeave(pDevIns->pCritSectRoR3);
309
310	return VINF_SUCCESS;
311	}
312	#endif /* IN_RING3 */
313
314
315	/**
316	* @callback_method_impl{FNIOMIOPORTNEWOUT}
317	*/
318	static DECLCALLBACK(VBOXSTRICTRC)
319	parallelIoPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb)
320	{
321	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
322	#ifdef IN_RING3
323	PPARALLELPORTR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PPARALLELPORTR3);
324	#endif
325	VBOXSTRICTRC rc = VINF_SUCCESS;
326	RT_NOREF_PV(pvUser);
327
328	if (cb == 1)
329	{
330	uint8_t u8 = u32;
331
332	Log2(("%s: Port=%#06x+%x val %#04x\n", __FUNCTION__, pThis->IOBase, offPort, u32));
333
334	offPort &= 7;
335	switch (offPort)
336	{
337	case 0:
338	#ifndef IN_RING3
339	NOREF(u8);
340	rc = VINF_IOM_R3_IOPORT_WRITE;
341	#else
342	pThis->regData = u8;
343	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
344	{
345	LogFlowFunc(("Set data lines 0x%X\n", u8));
346	rc = pThisCC->pDrvHostParallelConnector->pfnWrite(pThisCC->pDrvHostParallelConnector, &u8, 1, PDM_PARALLEL_PORT_MODE_SPP);
347	AssertRC(VBOXSTRICTRC_VAL(rc));
348	}
349	#endif
350	break;
351	case 1:
352	break;
353	case 2:
354	/* Set the reserved bits to one */
355	u8 \|= (LPT_CONTROL_BIT6 \| LPT_CONTROL_BIT7);
356	if (u8 != pThis->regControl)
357	{
358	#ifndef IN_RING3
359	return VINF_IOM_R3_IOPORT_WRITE;
360	#else
361	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
362	{
363	/* Set data direction. */
364	if (u8 & LPT_CONTROL_ENABLE_BIDIRECT)
365	rc = pThisCC->pDrvHostParallelConnector->pfnSetPortDirection(pThisCC->pDrvHostParallelConnector, false /* fForward */);
366	else
367	rc = pThisCC->pDrvHostParallelConnector->pfnSetPortDirection(pThisCC->pDrvHostParallelConnector, true /* fForward */);
368	AssertRC(VBOXSTRICTRC_VAL(rc));
369
370	u8 &= ~LPT_CONTROL_ENABLE_BIDIRECT; /* Clear bit. */
371
372	rc = pThisCC->pDrvHostParallelConnector->pfnWriteControl(pThisCC->pDrvHostParallelConnector, u8);
373	AssertRC(VBOXSTRICTRC_VAL(rc));
374	}
375	else
376	u8 &= ~LPT_CONTROL_ENABLE_BIDIRECT; /* Clear bit. */
377
378	pThis->regControl = u8;
379	#endif
380	}
381	break;
382	case 3:
383	#ifndef IN_RING3
384	NOREF(u8);
385	rc = VINF_IOM_R3_IOPORT_WRITE;
386	#else
387	pThis->regEppAddr = u8;
388	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
389	{
390	LogFlowFunc(("Write EPP address 0x%X\n", u8));
391	rc = pThisCC->pDrvHostParallelConnector->pfnWrite(pThisCC->pDrvHostParallelConnector, &u8, 1, PDM_PARALLEL_PORT_MODE_EPP_ADDR);
392	AssertRC(VBOXSTRICTRC_VAL(rc));
393	}
394	#endif
395	break;
396	case 4:
397	#ifndef IN_RING3
398	NOREF(u8);
399	rc = VINF_IOM_R3_IOPORT_WRITE;
400	#else
401	pThis->regEppData = u8;
402	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
403	{
404	LogFlowFunc(("Write EPP data 0x%X\n", u8));
405	rc = pThisCC->pDrvHostParallelConnector->pfnWrite(pThisCC->pDrvHostParallelConnector, &u8, 1, PDM_PARALLEL_PORT_MODE_EPP_DATA);
406	AssertRC(VBOXSTRICTRC_VAL(rc));
407	}
408	#endif
409	break;
410	case 5:
411	break;
412	case 6:
413	break;
414	case 7:
415	default:
416	break;
417	}
418	}
419	else
420	ASSERT_GUEST_MSG_FAILED(("Port=%#x+%x cb=%d u32=%#x\n", pThis->IOBase, offPort, cb, u32));
421
422	return rc;
423	}
424
425
426	/**
427	* @callback_method_impl{FNIOMIOPORTNEWIN}
428	*/
429	static DECLCALLBACK(VBOXSTRICTRC)
430	parallelIoPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT offPort, uint32_t pu32, unsigned cb)
431	{
432	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
433	#ifdef IN_RING3
434	PPARALLELPORTR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PPARALLELPORTR3);
435	#endif
436	VBOXSTRICTRC rc = VINF_SUCCESS;
437	RT_NOREF_PV(pvUser);
438
439	if (cb == 1)
440	{
441	offPort &= 7;
442	switch (offPort)
443	{
444	case 0:
445	if (!(pThis->regControl & LPT_CONTROL_ENABLE_BIDIRECT))
446	*pu32 = pThis->regData;
447	else
448	{
449	#ifndef IN_RING3
450	rc = VINF_IOM_R3_IOPORT_READ;
451	#else
452	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
453	{
454	rc = pThisCC->pDrvHostParallelConnector->pfnRead(pThisCC->pDrvHostParallelConnector, &pThis->regData,
455	1, PDM_PARALLEL_PORT_MODE_SPP);
456	Log(("Read data lines 0x%X\n", pThis->regData));
457	AssertRC(VBOXSTRICTRC_VAL(rc));
458	}
459	*pu32 = pThis->regData;
460	#endif
461	}
462	break;
463	case 1:
464	#ifndef IN_RING3
465	rc = VINF_IOM_R3_IOPORT_READ;
466	#else
467	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
468	{
469	rc = pThisCC->pDrvHostParallelConnector->pfnReadStatus(pThisCC->pDrvHostParallelConnector, &pThis->regStatus);
470	AssertRC(VBOXSTRICTRC_VAL(rc));
471	}
472	*pu32 = pThis->regStatus;
473	parallelR3IrqClear(pDevIns, pThis);
474	#endif
475	break;
476	case 2:
477	#ifndef IN_RING3
478	rc = VINF_IOM_R3_IOPORT_READ;
479	#else
480	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
481	{
482	rc = pThisCC->pDrvHostParallelConnector->pfnReadControl(pThisCC->pDrvHostParallelConnector, &pThis->regControl);
483	AssertRC(VBOXSTRICTRC_VAL(rc));
484	pThis->regControl \|= LPT_CONTROL_BIT6 \| LPT_CONTROL_BIT7;
485	}
486
487	*pu32 = pThis->regControl;
488	#endif
489	break;
490	case 3:
491	#ifndef IN_RING3
492	rc = VINF_IOM_R3_IOPORT_READ;
493	#else
494	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
495	{
496	rc = pThisCC->pDrvHostParallelConnector->pfnRead(pThisCC->pDrvHostParallelConnector, &pThis->regEppAddr,
497	1, PDM_PARALLEL_PORT_MODE_EPP_ADDR);
498	Log(("Read EPP address 0x%X\n", pThis->regEppAddr));
499	AssertRC(VBOXSTRICTRC_VAL(rc));
500	}
501	*pu32 = pThis->regEppAddr;
502	#endif
503	break;
504	case 4:
505	#ifndef IN_RING3
506	rc = VINF_IOM_R3_IOPORT_READ;
507	#else
508	if (RT_LIKELY(pThisCC->pDrvHostParallelConnector))
509	{
510	rc = pThisCC->pDrvHostParallelConnector->pfnRead(pThisCC->pDrvHostParallelConnector, &pThis->regEppData,
511	1, PDM_PARALLEL_PORT_MODE_EPP_DATA);
512	Log(("Read EPP data 0x%X\n", pThis->regEppData));
513	AssertRC(VBOXSTRICTRC_VAL(rc));
514	}
515	*pu32 = pThis->regEppData;
516	#endif
517	break;
518	case 5:
519	break;
520	case 6:
521	break;
522	case 7:
523	break;
524	}
525	}
526	else
527	rc = VERR_IOM_IOPORT_UNUSED;
528
529	return rc;
530	}
531
532	#if 0
533	/**
534	* @callback_method_impl{FNIOMIOPORTNEWOUT, ECP registers.}
535	*/
536	static DECLCALLBACK(VBOXSTRICTRC)
537	parallelIoPortWriteECP(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT offPort, uint32_t u32, unsigned cb)
538	{
539	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
540	VBOXSTRICTRC rc = VINF_SUCCESS;
541
542	if (cb == 1)
543	{
544	Log2(("%s: ecp port %#06x+%x val %#04x\n", __FUNCTION__, pThis->IOBase + 0x400, offPort, u32));
545	rc = parallel_ioport_write_ecp(pThis, Port, u32);
546	}
547	else
548	ASSERT_GUEST_MSG_FAILED(("Port=%#x cb=%d u32=%#x\n", Port, cb, u32));
549
550	return rc;
551	}
552
553	/**
554	* @callback_method_impl{FNIOMIOPORTNEWOUT, ECP registers.}
555	*/
556	static DECLCALLBACK(VBOXSTRICTRC)
557	parallelIoPortReadECP(PPDMDEVINS pDevIns, void pvUser, RTIOPORT offPort, uint32_t pu32, unsigned cb)
558	{
559	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
560	VBOXSTRICTRC rc = VINF_SUCCESS;
561
562	if (cb == 1)
563	{
564	*pu32 = parallel_ioport_read_ecp(pThis, Port, &rc);
565	Log2(("%s: ecp port %#06x+%x val %#04x\n", __FUNCTION__, pThis->IOBase + 0x400, offPort, *pu32));
566	}
567	else
568	rc = VERR_IOM_IOPORT_UNUSED;
569
570	return rc;
571	}
572	#endif
573
574	#ifdef IN_RING3
575
576	/**
577	* @callback_method_impl{FNSSMDEVLIVEEXEC}
578	*/
579	static DECLCALLBACK(int) parallelR3LiveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uPass)
580	{
581	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
582	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
583	RT_NOREF(uPass);
584
585	pHlp->pfnSSMPutS32(pSSM, pThis->iIrq);
586	pHlp->pfnSSMPutU32(pSSM, pThis->IOBase);
587	pHlp->pfnSSMPutU32(pSSM, UINT32_MAX); /* sanity/terminator */
588	return VINF_SSM_DONT_CALL_AGAIN;
589	}
590
591
592	/**
593	* @callback_method_impl{FNSSMDEVSAVEEXEC}
594	*/
595	static DECLCALLBACK(int) parallelR3SaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM)
596	{
597	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
598	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
599
600	pHlp->pfnSSMPutU8(pSSM, pThis->regData);
601	pHlp->pfnSSMPutU8(pSSM, pThis->regStatus);
602	pHlp->pfnSSMPutU8(pSSM, pThis->regControl);
603
604	parallelR3LiveExec(pDevIns, pSSM, 0);
605	return VINF_SUCCESS;
606	}
607
608
609	/**
610	* @callback_method_impl{FNSSMDEVLOADEXEC}
611	*/
612	static DECLCALLBACK(int) parallelR3LoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass)
613	{
614	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
615	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
616
617	AssertMsgReturn(uVersion == PARALLEL_SAVED_STATE_VERSION, ("%d\n", uVersion), VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION);
618	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
619	if (uPass == SSM_PASS_FINAL)
620	{
621	pHlp->pfnSSMGetU8(pSSM, &pThis->regData);
622	pHlp->pfnSSMGetU8(pSSM, &pThis->regStatus);
623	pHlp->pfnSSMGetU8(pSSM, &pThis->regControl);
624	}
625
626	/* the config */
627	int32_t iIrq;
628	pHlp->pfnSSMGetS32(pSSM, &iIrq);
629	uint32_t uIoBase;
630	pHlp->pfnSSMGetU32(pSSM, &uIoBase);
631	uint32_t u32;
632	int rc = pHlp->pfnSSMGetU32(pSSM, &u32);
633	AssertRCReturn(rc, rc);
634	AssertMsgReturn(u32 == UINT32_MAX, ("%#x\n", u32), VERR_SSM_DATA_UNIT_FORMAT_CHANGED);
635
636	if (pThis->iIrq != iIrq)
637	return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("IRQ changed: config=%#x state=%#x"), pThis->iIrq, iIrq);
638
639	if (pThis->IOBase != uIoBase)
640	return pHlp->pfnSSMSetCfgError(pSSM, RT_SRC_POS, N_("IOBase changed: config=%#x state=%#x"), pThis->IOBase, uIoBase);
641
642	return VINF_SUCCESS;
643	}
644
645
646	/**
647	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
648	*/
649	static DECLCALLBACK(void ) parallelR3QueryInterface(PPDMIBASE pInterface, const char pszIID)
650	{
651	PPARALLELPORTR3 pThisCC = RT_FROM_MEMBER(pInterface, PARALLELPORTR3, IBase);
652	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThisCC->IBase);
653	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIHOSTPARALLELPORT, &pThisCC->IHostParallelPort);
654	return NULL;
655	}
656
657
658	/**
659	* @interface_method_impl{PDMDEVREG,pfnConstruct}
660	*/
661	static DECLCALLBACK(int) parallelR3Construct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
662	{
663	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
664	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
665	PPARALLELPORTR3 pThisCC = PDMDEVINS_2_DATA_CC(pDevIns, PPARALLELPORTR3);
666	PCPDMDEVHLPR3 pHlp = pDevIns->pHlpR3;
667	int rc;
668
669	Assert(iInstance < 4);
670
671	/*
672	* Init the data.
673	*/
674	pThisCC->pDevIns = pDevIns;
675
676	/* IBase */
677	pThisCC->IBase.pfnQueryInterface = parallelR3QueryInterface;
678
679	/* IHostParallelPort */
680	pThisCC->IHostParallelPort.pfnNotifyInterrupt = parallelR3NotifyInterrupt;
681
682	/* Init parallel state */
683	pThis->regData = 0;
684	#if 0 /* ECP implementation not complete. */
685	pThis->reg_ecp_ecr = LPT_ECP_ECR_CHIPMODE_COMPAT \| LPT_ECP_ECR_FIFO_EMPTY;
686	pThis->act_fifo_pos_read = 0;
687	pThis->act_fifo_pos_write = 0;
688	#endif
689
690	/*
691	* Validate and read the configuration.
692	*/
693	PDMDEV_VALIDATE_CONFIG_RETURN(pDevIns, "IRQ\|IOBase", "");
694
695	rc = pHlp->pfnCFGMQueryS32Def(pCfg, "IRQ", &pThis->iIrq, 7);
696	if (RT_FAILURE(rc))
697	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IRQ\" value"));
698
699	rc = pHlp->pfnCFGMQueryU16Def(pCfg, "IOBase", &pThis->IOBase, 0x378);
700	if (RT_FAILURE(rc))
701	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Configuration error: Failed to get the \"IOBase\" value"));
702
703	int cPorts = (pThis->IOBase == 0x3BC) ? 4 : 8;
704	/*
705	* Register the I/O ports and saved state.
706	*/
707	rc = PDMDevHlpIoPortCreateAndMap(pDevIns, pThis->IOBase, cPorts, parallelIoPortWrite, parallelIoPortRead,
708	"Parallel", NULL /paExtDesc/, &pThis->hIoPorts);
709	AssertRCReturn(rc, rc);
710
711	#if 0
712	/* register ecp registers */
713	rc = PDMDevHlpIoPortCreateAndMap(pDevIns, pThis->IOBase + 0x400, 8, parallelIoPortWriteECP, parallelIoPortReadECP,
714	"Parallel ECP", NULL /paExtDesc/, &pThis->hIoPortsEcp);
715	AssertRCReturn(rc, rc);
716	#endif
717
718
719	rc = PDMDevHlpSSMRegister3(pDevIns, PARALLEL_SAVED_STATE_VERSION, sizeof(*pThis),
720	parallelR3LiveExec, parallelR3SaveExec, parallelR3LoadExec);
721	AssertRCReturn(rc, rc);
722
723
724	/*
725	* Attach the parallel port driver and get the interfaces.
726	* For now no run-time changes are supported.
727	*/
728	rc = PDMDevHlpDriverAttach(pDevIns, 0, &pThisCC->IBase, &pThisCC->pDrvBase, "Parallel Host");
729	if (RT_SUCCESS(rc))
730	{
731	pThisCC->pDrvHostParallelConnector = PDMIBASE_QUERY_INTERFACE(pThisCC->pDrvBase, PDMIHOSTPARALLELCONNECTOR);
732
733	/* Set compatibility mode */
734	//pThisCC->pDrvHostParallelConnector->pfnSetMode(pThisCC->pDrvHostParallelConnector, PDM_PARALLEL_PORT_MODE_COMPAT);
735	/* Get status of control register */
736	pThisCC->pDrvHostParallelConnector->pfnReadControl(pThisCC->pDrvHostParallelConnector, &pThis->regControl);
737
738	AssertMsgReturn(pThisCC->pDrvHostParallelConnector,
739	("Configuration error: instance %d has no host parallel interface!\n", iInstance),
740	VERR_PDM_MISSING_INTERFACE);
741	}
742	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
743	{
744	pThisCC->pDrvBase = NULL;
745	pThisCC->pDrvHostParallelConnector = NULL;
746	LogRel(("Parallel%d: no unit\n", iInstance));
747	}
748	else
749	AssertMsgFailedReturn(("Parallel%d: Failed to attach to host driver. rc=%Rrc\n", iInstance, rc),
750	PDMDevHlpVMSetError(pDevIns, rc, RT_SRC_POS,
751	N_("Parallel device %d cannot attach to host driver"), iInstance));
752
753	return VINF_SUCCESS;
754	}
755
756	#else /* !IN_RING3 */
757
758	/**
759	* @callback_method_impl{PDMDEVREGR0,pfnConstruct}
760	*/
761	static DECLCALLBACK(int) parallelRZConstruct(PPDMDEVINS pDevIns)
762	{
763	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
764	PPARALLELPORT pThis = PDMDEVINS_2_DATA(pDevIns, PPARALLELPORT);
765
766	int rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPorts, parallelIoPortWrite, parallelIoPortRead, NULL /pvUser/);
767	AssertRCReturn(rc, rc);
768
769	# if 0
770	rc = PDMDevHlpIoPortSetUpContext(pDevIns, pThis->hIoPortsEcp, parallelIoPortWriteECP, parallelIoPortReadECP, NULL /pvUser/);
771	AssertRCReturn(rc, rc);
772	# endif
773
774	return VINF_SUCCESS;
775	}
776
777	#endif /* !IN_RING3 */
778
779	/**
780	* The device registration structure.
781	*/
782	const PDMDEVREG g_DeviceParallelPort =
783	{
784	/* .u32Version = */ PDM_DEVREG_VERSION,
785	/* .uReserved0 = */ 0,
786	/* .szName = */ "parallel",
787	/* .fFlags = */ PDM_DEVREG_FLAGS_DEFAULT_BITS \| PDM_DEVREG_FLAGS_RZ \| PDM_DEVREG_FLAGS_NEW_STYLE,
788	/* .fClass = */ PDM_DEVREG_CLASS_PARALLEL,
789	/* .cMaxInstances = */ 2,
790	/* .uSharedVersion = */ 42,
791	/* .cbInstanceShared = */ sizeof(PARALLELPORT),
792	/* .cbInstanceCC = */ CTX_EXPR(sizeof(PARALLELPORTR3), 0, 0),
793	/* .cbInstanceRC = */ 0,
794	/* .cMaxPciDevices = */ 0,
795	/* .cMaxMsixVectors = */ 0,
796	/* .pszDescription = */ "Parallel Communication Port",
797	#if defined(IN_RING3)
798	/* .pszRCMod = */ "VBoxDDRC.rc",
799	/* .pszR0Mod = */ "VBoxDDR0.r0",
800	/* .pfnConstruct = */ parallelR3Construct,
801	/* .pfnDestruct = */ NULL,
802	/* .pfnRelocate = */ NULL,
803	/* .pfnMemSetup = */ NULL,
804	/* .pfnPowerOn = */ NULL,
805	/* .pfnReset = */ NULL,
806	/* .pfnSuspend = */ NULL,
807	/* .pfnResume = */ NULL,
808	/* .pfnAttach = */ NULL,
809	/* .pfnDetach = */ NULL,
810	/* .pfnQueryInterface = */ NULL,
811	/* .pfnInitComplete = */ NULL,
812	/* .pfnPowerOff = */ NULL,
813	/* .pfnSoftReset = */ NULL,
814	/* .pfnReserved0 = */ NULL,
815	/* .pfnReserved1 = */ NULL,
816	/* .pfnReserved2 = */ NULL,
817	/* .pfnReserved3 = */ NULL,
818	/* .pfnReserved4 = */ NULL,
819	/* .pfnReserved5 = */ NULL,
820	/* .pfnReserved6 = */ NULL,
821	/* .pfnReserved7 = */ NULL,
822	#elif defined(IN_RING0)
823	/* .pfnEarlyConstruct = */ NULL,
824	/* .pfnConstruct = */ parallelRZConstruct,
825	/* .pfnDestruct = */ NULL,
826	/* .pfnFinalDestruct = */ NULL,
827	/* .pfnRequest = */ NULL,
828	/* .pfnReserved0 = */ NULL,
829	/* .pfnReserved1 = */ NULL,
830	/* .pfnReserved2 = */ NULL,
831	/* .pfnReserved3 = */ NULL,
832	/* .pfnReserved4 = */ NULL,
833	/* .pfnReserved5 = */ NULL,
834	/* .pfnReserved6 = */ NULL,
835	/* .pfnReserved7 = */ NULL,
836	#elif defined(IN_RC)
837	/* .pfnConstruct = */ parallelRZConstruct,
838	/* .pfnReserved0 = */ NULL,
839	/* .pfnReserved1 = */ NULL,
840	/* .pfnReserved2 = */ NULL,
841	/* .pfnReserved3 = */ NULL,
842	/* .pfnReserved4 = */ NULL,
843	/* .pfnReserved5 = */ NULL,
844	/* .pfnReserved6 = */ NULL,
845	/* .pfnReserved7 = */ NULL,
846	#else
847	# error "Not in IN_RING3, IN_RING0 or IN_RC!"
848	#endif
849	/* .u32VersionEnd = */ PDM_DEVREG_VERSION
850	};
851
852	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
853

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Parallel/DevParallel.cpp@ 86692

Download in other formats: