UartCore.cpp@ 75265

Last change on this file since 75265 was 75134, checked in by vboxsync, 6 years ago
DevSerial,UartCore: Attempt and getting old states to load. Needs proper testing that includes live saved states/migration.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 62.1 KB

Line
1	/* $Id: UartCore.cpp 75134 2018-10-28 19:14:47Z vboxsync $ */
2	/** @file
3	* UartCore - UART (16550A up to 16950) emulation.
4	*
5	* The documentation for this device was taken from the PC16550D spec from TI.
6	*/
7
8	/*
9	* Copyright (C) 2018 Oracle Corporation
10	*
11	* This file is part of VirtualBox Open Source Edition (OSE), as
12	* available from http://www.virtualbox.org. This file is free software;
13	* you can redistribute it and/or modify it under the terms of the GNU
14	* General Public License (GPL) as published by the Free Software
15	* Foundation, in version 2 as it comes in the "COPYING" file of the
16	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
17	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
18	*/
19
20
21	/*********************************************************************************************************************************
22	* Header Files *
23	*********************************************************************************************************************************/
24	#define LOG_GROUP LOG_GROUP_DEV_SERIAL
25	#include <VBox/vmm/tm.h>
26	#include <iprt/log.h>
27	#include <iprt/uuid.h>
28	#include <iprt/assert.h>
29
30	#include "VBoxDD.h"
31	#include "UartCore.h"
32
33
34	/*********************************************************************************************************************************
35	* Defined Constants And Macros *
36	*********************************************************************************************************************************/
37
38	/** The RBR/DLL register index (from the base of the port range). */
39	#define UART_REG_RBR_DLL_INDEX 0
40
41	/** The THR/DLL register index (from the base of the port range). */
42	#define UART_REG_THR_DLL_INDEX 0
43
44	/** The IER/DLM register index (from the base of the port range). */
45	#define UART_REG_IER_DLM_INDEX 1
46	/** Enable received data available interrupt */
47	# define UART_REG_IER_ERBFI RT_BIT(0)
48	/** Enable transmitter holding register empty interrupt */
49	# define UART_REG_IER_ETBEI RT_BIT(1)
50	/** Enable receiver line status interrupt */
51	# define UART_REG_IER_ELSI RT_BIT(2)
52	/** Enable modem status interrupt. */
53	# define UART_REG_IER_EDSSI RT_BIT(3)
54	/** Sleep mode enable. */
55	# define UART_REG_IER_SLEEP_MODE_EN RT_BIT(4)
56	/** Low power mode enable. */
57	# define UART_REG_IER_LP_MODE_EN RT_BIT(5)
58	/** Mask of writeable bits. */
59	# define UART_REG_IER_MASK_WR 0x0f
60	/** Mask of writeable bits for 16750+. */
61	# define UART_REG_IER_MASK_WR_16750 0x3f
62
63	/** The IIR register index (from the base of the port range). */
64	#define UART_REG_IIR_INDEX 2
65	/** Interrupt Pending - high means no interrupt pending. */
66	# define UART_REG_IIR_IP_NO_INT RT_BIT(0)
67	/** Interrupt identification mask. */
68	# define UART_REG_IIR_ID_MASK 0x0e
69	/** Sets the interrupt identification to the given value. */
70	# define UART_REG_IIR_ID_SET(a_Val) (((a_Val) << 1) & UART_REG_IIR_ID_MASK)
71	/** Gets the interrupt identification from the given IIR register value. */
72	# define UART_REG_IIR_ID_GET(a_Val) (((a_Val) & UART_REG_IIR_ID_MASK) >> 1)
73	/** Receiver Line Status interrupt. */
74	# define UART_REG_IIR_ID_RCL 0x3
75	/** Received Data Available interrupt. */
76	# define UART_REG_IIR_ID_RDA 0x2
77	/** Character Timeou Indicator interrupt. */
78	# define UART_REG_IIR_ID_CTI 0x6
79	/** Transmitter Holding Register Empty interrupt. */
80	# define UART_REG_IIR_ID_THRE 0x1
81	/** Modem Status interrupt. */
82	# define UART_REG_IIR_ID_MS 0x0
83	/** 64 byte FIFOs enabled (15750+ only). */
84	# define UART_REG_IIR_64BYTE_FIFOS_EN RT_BIT(5)
85	/** FIFOs enabled. */
86	# define UART_REG_IIR_FIFOS_EN 0xc0
87	/** Bits relevant for checking whether the interrupt status has changed. */
88	# define UART_REG_IIR_CHANGED_MASK 0x0f
89
90	/** The FCR register index (from the base of the port range). */
91	#define UART_REG_FCR_INDEX 2
92	/** Enable the TX/RX FIFOs. */
93	# define UART_REG_FCR_FIFO_EN RT_BIT(0)
94	/** Reset the receive FIFO. */
95	# define UART_REG_FCR_RCV_FIFO_RST RT_BIT(1)
96	/** Reset the transmit FIFO. */
97	# define UART_REG_FCR_XMIT_FIFO_RST RT_BIT(2)
98	/** DMA Mode Select. */
99	# define UART_REG_FCR_DMA_MODE_SEL RT_BIT(3)
100	/** 64 Byte FIFO enable (15750+ only). */
101	# define UART_REG_FCR_64BYTE_FIFO_EN RT_BIT(5)
102	/** Receiver level interrupt trigger. */
103	# define UART_REG_FCR_RCV_LVL_IRQ_MASK 0xc0
104	/** Returns the receive level trigger value from the given FCR register. */
105	# define UART_REG_FCR_RCV_LVL_IRQ_GET(a_Fcr) (((a_Fcr) & UART_REG_FCR_RCV_LVL_IRQ_MASK) >> 6)
106	/** RCV Interrupt trigger level - 1 byte. */
107	# define UART_REG_FCR_RCV_LVL_IRQ_1 0x0
108	/** RCV Interrupt trigger level - 4 bytes. */
109	# define UART_REG_FCR_RCV_LVL_IRQ_4 0x1
110	/** RCV Interrupt trigger level - 8 bytes. */
111	# define UART_REG_FCR_RCV_LVL_IRQ_8 0x2
112	/** RCV Interrupt trigger level - 14 bytes. */
113	# define UART_REG_FCR_RCV_LVL_IRQ_14 0x3
114	/** Mask of writeable bits. */
115	# define UART_REG_FCR_MASK_WR 0xcf
116	/** Mask of sticky bits. */
117	# define UART_REG_FCR_MASK_STICKY 0xe9
118
119	/** The LCR register index (from the base of the port range). */
120	#define UART_REG_LCR_INDEX 3
121	/** Word Length Select Mask. */
122	# define UART_REG_LCR_WLS_MASK 0x3
123	/** Returns the WLS value form the given LCR register value. */
124	# define UART_REG_LCR_WLS_GET(a_Lcr) ((a_Lcr) & UART_REG_LCR_WLS_MASK)
125	/** Number of stop bits. */
126	# define UART_REG_LCR_STB RT_BIT(2)
127	/** Parity Enable. */
128	# define UART_REG_LCR_PEN RT_BIT(3)
129	/** Even Parity. */
130	# define UART_REG_LCR_EPS RT_BIT(4)
131	/** Stick parity. */
132	# define UART_REG_LCR_PAR_STICK RT_BIT(5)
133	/** Set Break. */
134	# define UART_REG_LCR_BRK_SET RT_BIT(6)
135	/** Divisor Latch Access Bit. */
136	# define UART_REG_LCR_DLAB RT_BIT(7)
137
138	/** The MCR register index (from the base of the port range). */
139	#define UART_REG_MCR_INDEX 4
140	/** Data Terminal Ready. */
141	# define UART_REG_MCR_DTR RT_BIT(0)
142	/** Request To Send. */
143	# define UART_REG_MCR_RTS RT_BIT(1)
144	/** Out1. */
145	# define UART_REG_MCR_OUT1 RT_BIT(2)
146	/** Out2. */
147	# define UART_REG_MCR_OUT2 RT_BIT(3)
148	/** Loopback connection. */
149	# define UART_REG_MCR_LOOP RT_BIT(4)
150	/** Flow Control Enable (15750+ only). */
151	# define UART_REG_MCR_AFE RT_BIT(5)
152	/** Mask of writeable bits (15450 and 15550A). */
153	# define UART_REG_MCR_MASK_WR 0x1f
154	/** Mask of writeable bits (15750+). */
155	# define UART_REG_MCR_MASK_WR_15750 0x3f
156
157	/** The LSR register index (from the base of the port range). */
158	#define UART_REG_LSR_INDEX 5
159	/** Data Ready. */
160	# define UART_REG_LSR_DR RT_BIT(0)
161	/** Overrun Error. */
162	# define UART_REG_LSR_OE RT_BIT(1)
163	/** Parity Error. */
164	# define UART_REG_LSR_PE RT_BIT(2)
165	/** Framing Error. */
166	# define UART_REG_LSR_FE RT_BIT(3)
167	/** Break Interrupt. */
168	# define UART_REG_LSR_BI RT_BIT(4)
169	/** Transmitter Holding Register. */
170	# define UART_REG_LSR_THRE RT_BIT(5)
171	/** Transmitter Empty. */
172	# define UART_REG_LSR_TEMT RT_BIT(6)
173	/** Error in receiver FIFO. */
174	# define UART_REG_LSR_RCV_FIFO_ERR RT_BIT(7)
175	/** The bits to check in this register when checking for the RCL interrupt. */
176	# define UART_REG_LSR_BITS_IIR_RCL 0x1e
177
178	/** The MSR register index (from the base of the port range). */
179	#define UART_REG_MSR_INDEX 6
180	/** Delta Clear to Send. */
181	# define UART_REG_MSR_DCTS RT_BIT(0)
182	/** Delta Data Set Ready. */
183	# define UART_REG_MSR_DDSR RT_BIT(1)
184	/** Trailing Edge Ring Indicator. */
185	# define UART_REG_MSR_TERI RT_BIT(2)
186	/** Delta Data Carrier Detect. */
187	# define UART_REG_MSR_DDCD RT_BIT(3)
188	/** Clear to Send. */
189	# define UART_REG_MSR_CTS RT_BIT(4)
190	/** Data Set Ready. */
191	# define UART_REG_MSR_DSR RT_BIT(5)
192	/** Ring Indicator. */
193	# define UART_REG_MSR_RI RT_BIT(6)
194	/** Data Carrier Detect. */
195	# define UART_REG_MSR_DCD RT_BIT(7)
196	/** The bits to check in this register when checking for the MS interrupt. */
197	# define UART_REG_MSR_BITS_IIR_MS 0x0f
198
199	/** The SCR register index (from the base of the port range). */
200	#define UART_REG_SCR_INDEX 7
201
202	/** Set the specified bits in the given register. */
203	#define UART_REG_SET(a_Reg, a_Set) ((a_Reg) \|= (a_Set))
204	/** Clear the specified bits in the given register. */
205	#define UART_REG_CLR(a_Reg, a_Clr) ((a_Reg) &= ~(a_Clr))
206
207
208	/*********************************************************************************************************************************
209	* Structures and Typedefs *
210	*********************************************************************************************************************************/
211
212	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
213
214
215	/*********************************************************************************************************************************
216	* Global Variables *
217	*********************************************************************************************************************************/
218
219	#ifdef IN_RING3
220	/**
221	* FIFO ITL levels.
222	*/
223	static struct
224	{
225	/** ITL level for a 16byte FIFO. */
226	uint8_t cbItl16;
227	/** ITL level for a 64byte FIFO. */
228	uint8_t cbItl64;
229	} s_aFifoItl[] =
230	{
231	/* cbItl16 cbItl64 */
232	{ 1, 1 },
233	{ 4, 16 },
234	{ 8, 32 },
235	{ 14, 56 }
236	};
237
238
239	/**
240	* String versions of the parity enum.
241	*/
242	static const char *s_aszParity[] =
243	{
244	"INVALID",
245	"NONE",
246	"EVEN",
247	"ODD",
248	"MARK",
249	"SPACE",
250	"INVALID"
251	};
252
253
254	/**
255	* String versions of the stop bits enum.
256	*/
257	static const char *s_aszStopBits[] =
258	{
259	"INVALID",
260	"1",
261	"1.5",
262	"2",
263	"INVALID"
264	};
265	#endif
266
267
268	/*********************************************************************************************************************************
269	* Internal Functions *
270	*********************************************************************************************************************************/
271
272
273	/**
274	* Updates the IRQ state based on the current device state.
275	*
276	* @returns nothing.
277	* @param pThis The UART core instance.
278	*/
279	static void uartIrqUpdate(PUARTCORE pThis)
280	{
281	LogFlowFunc(("pThis=%#p\n", pThis));
282
283	/*
284	* The interrupt uses a priority scheme, only the interrupt with the
285	* highest priority is indicated in the interrupt identification register.
286	*
287	* The priorities are as follows (high to low):
288	* * Receiver line status
289	* * Received data available
290	* * Character timeout indication (only in FIFO mode).
291	* * Transmitter holding register empty
292	* * Modem status change.
293	*/
294	uint8_t uRegIirNew = UART_REG_IIR_IP_NO_INT;
295	if ( (pThis->uRegLsr & UART_REG_LSR_BITS_IIR_RCL)
296	&& (pThis->uRegIer & UART_REG_IER_ELSI))
297	uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_RCL);
298	else if ( (pThis->uRegIer & UART_REG_IER_ERBFI)
299	&& pThis->fIrqCtiPending)
300	uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_CTI);
301	else if ( (pThis->uRegLsr & UART_REG_LSR_DR)
302	&& (pThis->uRegIer & UART_REG_IER_ERBFI)
303	&& ( !(pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
304	\|\| pThis->FifoRecv.cbUsed >= pThis->FifoRecv.cbItl))
305	uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_RDA);
306	else if ( (pThis->uRegLsr & UART_REG_LSR_THRE)
307	&& pThis->fThreEmptyPending)
308	uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_THRE);
309	else if ( (pThis->uRegMsr & UART_REG_MSR_BITS_IIR_MS)
310	&& (pThis->uRegIer & UART_REG_IER_EDSSI))
311	uRegIirNew = UART_REG_IIR_ID_SET(UART_REG_IIR_ID_MS);
312
313	LogFlowFunc((" uRegIirNew=%#x uRegIir=%#x\n", uRegIirNew, pThis->uRegIir));
314
315	/* Change interrupt only if the interrupt status really changed from the previous value. */
316	if (uRegIirNew != (pThis->uRegIir & UART_REG_IIR_CHANGED_MASK))
317	{
318	LogFlow((" Interrupt source changed from %#x -> %#x (IRQ %d -> %d)\n",
319	pThis->uRegIir, uRegIirNew,
320	pThis->uRegIir == UART_REG_IIR_IP_NO_INT ? 0 : 1,
321	uRegIirNew == UART_REG_IIR_IP_NO_INT ? 0 : 1));
322	if (uRegIirNew == UART_REG_IIR_IP_NO_INT)
323	pThis->CTX_SUFF(pfnUartIrqReq)(pThis->CTX_SUFF(pDevIns), pThis, pThis->iLUN, 0);
324	else
325	pThis->CTX_SUFF(pfnUartIrqReq)(pThis->CTX_SUFF(pDevIns), pThis, pThis->iLUN, 1);
326	}
327	else
328	LogFlow((" No change in interrupt source\n"));
329
330	if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
331	uRegIirNew \|= UART_REG_IIR_FIFOS_EN;
332	if (pThis->uRegFcr & UART_REG_FCR_64BYTE_FIFO_EN)
333	uRegIirNew \|= UART_REG_IIR_64BYTE_FIFOS_EN;
334
335	pThis->uRegIir = uRegIirNew;
336	}
337
338
339	/**
340	* Returns the amount of bytes stored in the given FIFO.
341	*
342	* @returns Amount of bytes stored in the FIFO.
343	* @param pFifo The FIFO.
344	*/
345	DECLINLINE(size_t) uartFifoUsedGet(PUARTFIFO pFifo)
346	{
347	return pFifo->cbUsed;
348	}
349
350
351	/**
352	* Puts a new character into the given FIFO.
353	*
354	* @returns Flag whether the FIFO overflowed.
355	* @param pFifo The FIFO to put the data into.
356	* @param fOvrWr Flag whether to overwrite data if the FIFO is full.
357	* @param bData The data to add.
358	*/
359	DECLINLINE(bool) uartFifoPut(PUARTFIFO pFifo, bool fOvrWr, uint8_t bData)
360	{
361	if (fOvrWr \|\| pFifo->cbUsed < pFifo->cbMax)
362	{
363	pFifo->abBuf[pFifo->offWrite] = bData;
364	pFifo->offWrite = (pFifo->offWrite + 1) % pFifo->cbMax;
365	}
366
367	bool fOverFlow = false;
368	if (pFifo->cbUsed < pFifo->cbMax)
369	pFifo->cbUsed++;
370	else
371	{
372	fOverFlow = true;
373	if (fOvrWr) /* Advance the read position to account for the lost character. */
374	pFifo->offRead = (pFifo->offRead + 1) % pFifo->cbMax;
375	}
376
377	return fOverFlow;
378	}
379
380
381	/**
382	* Returns the next character in the FIFO.
383	*
384	* @return Next byte in the FIFO.
385	* @param pFifo The FIFO to get data from.
386	*/
387	DECLINLINE(uint8_t) uartFifoGet(PUARTFIFO pFifo)
388	{
389	uint8_t bRet = 0;
390
391	if (pFifo->cbUsed)
392	{
393	bRet = pFifo->abBuf[pFifo->offRead];
394	pFifo->offRead = (pFifo->offRead + 1) % pFifo->cbMax;
395	pFifo->cbUsed--;
396	}
397
398	return bRet;
399	}
400
401
402	#ifdef IN_RING3
403	/**
404	* Clears the given FIFO.
405	*
406	* @returns nothing.
407	* @param pFifo The FIFO to clear.
408	*/
409	DECLINLINE(void) uartFifoClear(PUARTFIFO pFifo)
410	{
411	memset(&pFifo->abBuf[0], 0, sizeof(pFifo->abBuf));
412	pFifo->cbUsed = 0;
413	pFifo->offWrite = 0;
414	pFifo->offRead = 0;
415	}
416
417
418	/**
419	* Returns the amount of free bytes in the given FIFO.
420	*
421	* @returns The amount of bytes free in the given FIFO.
422	* @param pFifo The FIFO.
423	*/
424	DECLINLINE(size_t) uartFifoFreeGet(PUARTFIFO pFifo)
425	{
426	return pFifo->cbMax - pFifo->cbUsed;
427	}
428
429
430	/**
431	* Tries to copy the requested amount of data from the given FIFO into the provided buffer.
432	*
433	* @returns Amount of bytes actually copied.
434	* @param pFifo The FIFO to copy data from.
435	* @param pvDst Where to copy the data to.
436	* @param cbCopy How much to copy.
437	*/
438	DECLINLINE(size_t) uartFifoCopyTo(PUARTFIFO pFifo, void *pvDst, size_t cbCopy)
439	{
440	size_t cbCopied = 0;
441	uint8_t pbDst = (uint8_t )pvDst;
442
443	cbCopy = RT_MIN(cbCopy, pFifo->cbUsed);
444	while (cbCopy)
445	{
446	uint8_t cbThisCopy = (uint8_t)RT_MIN(cbCopy, (uint8_t)(pFifo->cbMax - pFifo->offRead));
447	memcpy(pbDst, &pFifo->abBuf[pFifo->offRead], cbThisCopy);
448
449	pFifo->offRead = (pFifo->offRead + cbThisCopy) % pFifo->cbMax;
450	pFifo->cbUsed -= cbThisCopy;
451	pbDst += cbThisCopy;
452	cbCopied += cbThisCopy;
453	cbCopy -= cbThisCopy;
454	}
455
456	return cbCopied;
457	}
458
459
460	#if 0 /* unused */
461	/**
462	* Tries to copy the requested amount of data from the provided buffer into the given FIFO.
463	*
464	* @returns Amount of bytes actually copied.
465	* @param pFifo The FIFO to copy data to.
466	* @param pvSrc Where to copy the data from.
467	* @param cbCopy How much to copy.
468	*/
469	DECLINLINE(size_t) uartFifoCopyFrom(PUARTFIFO pFifo, void *pvSrc, size_t cbCopy)
470	{
471	size_t cbCopied = 0;
472	uint8_t pbSrc = (uint8_t )pvSrc;
473
474	cbCopy = RT_MIN(cbCopy, uartFifoFreeGet(pFifo));
475	while (cbCopy)
476	{
477	uint8_t cbThisCopy = (uint8_t)RT_MIN(cbCopy, (uint8_t)(pFifo->cbMax - pFifo->offWrite));
478	memcpy(&pFifo->abBuf[pFifo->offWrite], pbSrc, cbThisCopy);
479
480	pFifo->offWrite = (pFifo->offWrite + cbThisCopy) % pFifo->cbMax;
481	pFifo->cbUsed += cbThisCopy;
482	pbSrc += cbThisCopy;
483	cbCopied += cbThisCopy;
484	cbCopy -= cbThisCopy;
485	}
486
487	return cbCopied;
488	}
489	#endif
490
491
492	/**
493	* Updates the delta bits for the given MSR register value which has the status line
494	* bits set.
495	*
496	* @returns nothing.
497	* @param pThis The serial port instance.
498	* @param uMsrSts MSR value with the appropriate status bits set.
499	*/
500	static void uartR3MsrUpdate(PUARTCORE pThis, uint8_t uMsrSts)
501	{
502	/* Compare current and new states and set remaining bits accordingly. */
503	if ((uMsrSts & UART_REG_MSR_CTS) != (pThis->uRegMsr & UART_REG_MSR_CTS))
504	uMsrSts \|= UART_REG_MSR_DCTS;
505	if ((uMsrSts & UART_REG_MSR_DSR) != (pThis->uRegMsr & UART_REG_MSR_DSR))
506	uMsrSts \|= UART_REG_MSR_DDSR;
507	if ((uMsrSts & UART_REG_MSR_RI) != 0 && (pThis->uRegMsr & UART_REG_MSR_RI) == 0)
508	uMsrSts \|= UART_REG_MSR_TERI;
509	if ((uMsrSts & UART_REG_MSR_DCD) != (pThis->uRegMsr & UART_REG_MSR_DCD))
510	uMsrSts \|= UART_REG_MSR_DDCD;
511
512	pThis->uRegMsr = uMsrSts;
513
514	uartIrqUpdate(pThis);
515	}
516
517
518	/**
519	* Updates the serial port parameters of the attached driver with the current configuration.
520	*
521	* @returns nothing.
522	* @param pThis The serial port instance.
523	*/
524	static void uartR3ParamsUpdate(PUARTCORE pThis)
525	{
526	if ( pThis->uRegDivisor != 0
527	&& pThis->pDrvSerial)
528	{
529	uint32_t uBps = 115200 / pThis->uRegDivisor; /* This is for PC compatible serial port with a 1.8432 MHz crystal. */
530	unsigned cDataBits = UART_REG_LCR_WLS_GET(pThis->uRegLcr) + 5;
531	uint32_t cFrameBits = cDataBits;
532	PDMSERIALSTOPBITS enmStopBits = PDMSERIALSTOPBITS_ONE;
533	PDMSERIALPARITY enmParity = PDMSERIALPARITY_NONE;
534
535	if (pThis->uRegLcr & UART_REG_LCR_STB)
536	{
537	enmStopBits = cDataBits == 5 ? PDMSERIALSTOPBITS_ONEPOINTFIVE : PDMSERIALSTOPBITS_TWO;
538	cFrameBits += 2;
539	}
540	else
541	cFrameBits++;
542
543	if (pThis->uRegLcr & UART_REG_LCR_PEN)
544	{
545	/* Select the correct parity mode based on the even and stick parity bits. */
546	switch (pThis->uRegLcr & (UART_REG_LCR_EPS \| UART_REG_LCR_PAR_STICK))
547	{
548	case 0:
549	enmParity = PDMSERIALPARITY_ODD;
550	break;
551	case UART_REG_LCR_EPS:
552	enmParity = PDMSERIALPARITY_EVEN;
553	break;
554	case UART_REG_LCR_EPS \| UART_REG_LCR_PAR_STICK:
555	enmParity = PDMSERIALPARITY_SPACE;
556	break;
557	case UART_REG_LCR_PAR_STICK:
558	enmParity = PDMSERIALPARITY_MARK;
559	break;
560	default:
561	/* We should never get here as all cases where caught earlier. */
562	AssertMsgFailed(("This shouldn't happen at all: %#x\n",
563	pThis->uRegLcr & (UART_REG_LCR_EPS \| UART_REG_LCR_PAR_STICK)));
564	}
565
566	cFrameBits++;
567	}
568
569	uint64_t uTimerFreq = TMTimerGetFreq(pThis->CTX_SUFF(pTimerRcvFifoTimeout));
570	pThis->cSymbolXferTicks = (uTimerFreq / uBps) * cFrameBits;
571
572	LogFlowFunc(("Changing parameters to: %u,%s,%u,%s\n",
573	uBps, s_aszParity[enmParity], cDataBits, s_aszStopBits[enmStopBits]));
574
575	int rc = pThis->pDrvSerial->pfnChgParams(pThis->pDrvSerial, uBps, enmParity, cDataBits, enmStopBits);
576	if (RT_FAILURE(rc))
577	LogRelMax(10, ("Serial#%d: Failed to change parameters to %u,%s,%u,%s -> %Rrc\n",
578	pThis->pDevInsR3->iInstance, uBps, s_aszParity[enmParity], cDataBits, s_aszStopBits[enmStopBits], rc));
579
580	/* Changed parameters will flush all receive queues, so there won't be any data to read even if indicated. */
581	pThis->pDrvSerial->pfnQueuesFlush(pThis->pDrvSerial, true /fQueueRecv/, false /fQueueXmit/);
582	ASMAtomicWriteU32(&pThis->cbAvailRdr, 0);
583	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
584	}
585	}
586
587
588	/**
589	* Updates the internal device state with the given PDM status line states.
590	*
591	* @returns nothing.
592	* @param pThis The serial port instance.
593	* @param fStsLines The PDM status line states.
594	*/
595	static void uartR3StsLinesUpdate(PUARTCORE pThis, uint32_t fStsLines)
596	{
597	uint8_t uRegMsrNew = 0; /* The new MSR value. */
598
599	if (fStsLines & PDMISERIALPORT_STS_LINE_DCD)
600	uRegMsrNew \|= UART_REG_MSR_DCD;
601	if (fStsLines & PDMISERIALPORT_STS_LINE_RI)
602	uRegMsrNew \|= UART_REG_MSR_RI;
603	if (fStsLines & PDMISERIALPORT_STS_LINE_DSR)
604	uRegMsrNew \|= UART_REG_MSR_DSR;
605	if (fStsLines & PDMISERIALPORT_STS_LINE_CTS)
606	uRegMsrNew \|= UART_REG_MSR_CTS;
607
608	uartR3MsrUpdate(pThis, uRegMsrNew);
609	}
610
611
612	/**
613	* Fills up the receive FIFO with as much data as possible.
614	*
615	* @returns nothing.
616	* @param pThis The serial port instance.
617	*/
618	static void uartR3RecvFifoFill(PUARTCORE pThis)
619	{
620	LogFlowFunc(("pThis=%#p\n", pThis));
621
622	PUARTFIFO pFifo = &pThis->FifoRecv;
623	size_t cbFill = RT_MIN(uartFifoFreeGet(pFifo),
624	ASMAtomicReadU32(&pThis->cbAvailRdr));
625	size_t cbFilled = 0;
626
627	while (cbFilled < cbFill)
628	{
629	size_t cbThisRead = cbFill - cbFilled;
630
631	if (pFifo->offRead <= pFifo->offWrite)
632	cbThisRead = RT_MIN(cbThisRead, (uint8_t)(pFifo->cbMax - pFifo->offWrite));
633	else
634	cbThisRead = RT_MIN(cbThisRead, (uint8_t)(pFifo->offRead - pFifo->offWrite));
635
636	size_t cbRead = 0;
637	int rc = pThis->pDrvSerial->pfnReadRdr(pThis->pDrvSerial, &pFifo->abBuf[pFifo->offWrite], cbThisRead, &cbRead);
638	AssertRC(rc); Assert(cbRead <= UINT8_MAX); RT_NOREF(rc);
639
640	pFifo->offWrite = (pFifo->offWrite + (uint8_t)cbRead) % pFifo->cbMax;
641	pFifo->cbUsed += (uint8_t)cbRead;
642	cbFilled += cbRead;
643
644	if (cbRead < cbThisRead)
645	break;
646	}
647
648	if (cbFilled)
649	{
650	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
651	if (pFifo->cbUsed < pFifo->cbItl)
652	{
653	pThis->fIrqCtiPending = false;
654	TMTimerSetRelative(pThis->CTX_SUFF(pTimerRcvFifoTimeout), pThis->cSymbolXferTicks * 4, NULL);
655	}
656	uartIrqUpdate(pThis);
657	}
658
659	Assert(cbFilled <= (size_t)pThis->cbAvailRdr);
660	ASMAtomicSubU32(&pThis->cbAvailRdr, (uint32_t)cbFilled);
661	}
662
663
664	/**
665	* Fetches a single byte and writes it to RBR.
666	*
667	* @returns nothing.
668	* @param pThis The serial port instance.
669	*/
670	static void uartR3ByteFetch(PUARTCORE pThis)
671	{
672	if (ASMAtomicReadU32(&pThis->cbAvailRdr))
673	{
674	AssertPtr(pThis->pDrvSerial);
675	size_t cbRead = 0;
676	int rc2 = pThis->pDrvSerial->pfnReadRdr(pThis->pDrvSerial, &pThis->uRegRbr, 1, &cbRead);
677	AssertMsg(RT_SUCCESS(rc2) && cbRead == 1, ("This shouldn't fail and always return one byte!\n")); RT_NOREF(rc2);
678	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
679	uartIrqUpdate(pThis);
680	}
681	}
682
683
684	/**
685	* Fetches a ready data based on the FIFO setting.
686	*
687	* @returns nothing.
688	* @param pThis The serial port instance.
689	*/
690	static void uartR3DataFetch(PUARTCORE pThis)
691	{
692	if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
693	uartR3RecvFifoFill(pThis);
694	else
695	uartR3ByteFetch(pThis);
696	}
697
698
699	/**
700	* Reset the transmit/receive related bits to the standard values
701	* (after a detach/attach/reset event).
702	*
703	* @returns nothing.
704	* @param pThis The serial port instance.
705	*/
706	static void uartR3XferReset(PUARTCORE pThis)
707	{
708	pThis->uRegLsr = UART_REG_LSR_THRE \| UART_REG_LSR_TEMT;
709	pThis->fThreEmptyPending = false;
710
711	uartFifoClear(&pThis->FifoXmit);
712	uartFifoClear(&pThis->FifoRecv);
713	uartR3ParamsUpdate(pThis);
714	uartIrqUpdate(pThis);
715
716	if (pThis->pDrvSerial)
717	{
718	/* Set the modem lines to reflect the current state. */
719	int rc = pThis->pDrvSerial->pfnChgModemLines(pThis->pDrvSerial, false /fRts/, false /fDtr/);
720	if (RT_FAILURE(rc))
721	LogRel(("Serial#%d: Failed to set modem lines with %Rrc during reset\n",
722	pThis->pDevInsR3->iInstance, rc));
723
724	uint32_t fStsLines = 0;
725	rc = pThis->pDrvSerial->pfnQueryStsLines(pThis->pDrvSerial, &fStsLines);
726	if (RT_SUCCESS(rc))
727	uartR3StsLinesUpdate(pThis, fStsLines);
728	else
729	LogRel(("Serial#%d: Failed to query status line status with %Rrc during reset\n",
730	pThis->pDevInsR3->iInstance, rc));
731	}
732
733	}
734
735
736	/**
737	* Tries to copy the specified amount of data from the active TX queue (register or FIFO).
738	*
739	* @returns nothing.
740	* @param pThis The serial port instance.
741	* @param pvBuf Where to store the data.
742	* @param cbRead How much to read from the TX queue.
743	* @param pcbRead Where to store the amount of data read.
744	*/
745	static void uartR3TxQueueCopyFrom(PUARTCORE pThis, void pvBuf, size_t cbRead, size_t pcbRead)
746	{
747	if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
748	{
749	*pcbRead = uartFifoCopyTo(&pThis->FifoXmit, pvBuf, cbRead);
750	if (!pThis->FifoXmit.cbUsed)
751	{
752	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_THRE);
753	pThis->fThreEmptyPending = true;
754	}
755	if (*pcbRead)
756	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_TEMT);
757	uartIrqUpdate(pThis);
758	}
759	else if (!(pThis->uRegLsr & UART_REG_LSR_THRE))
760	{
761	(uint8_t )pvBuf = pThis->uRegThr;
762	*pcbRead = 1;
763	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_THRE);
764	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_TEMT);
765	pThis->fThreEmptyPending = true;
766	uartIrqUpdate(pThis);
767	}
768	else
769	{
770	/*
771	* This can happen if there was data in the FIFO when the connection was closed,
772	* indicate this condition to the lower driver by returning 0 bytes.
773	*/
774	*pcbRead = 0;
775	}
776	}
777	#endif
778
779
780	/**
781	* Write handler for the THR/DLL register (depending on the DLAB bit in LCR).
782	*
783	* @returns VBox status code.
784	* @param pThis The serial port instance.
785	* @param uVal The value to write.
786	*/
787	DECLINLINE(int) uartRegThrDllWrite(PUARTCORE pThis, uint8_t uVal)
788	{
789	int rc = VINF_SUCCESS;
790
791	/* A set DLAB causes a write to the lower 8bits of the divisor latch. */
792	if (pThis->uRegLcr & UART_REG_LCR_DLAB)
793	{
794	if (uVal != (pThis->uRegDivisor & 0xff))
795	{
796	#ifndef IN_RING3
797	rc = VINF_IOM_R3_IOPORT_WRITE;
798	#else
799	pThis->uRegDivisor = (pThis->uRegDivisor & 0xff00) \| uVal;
800	uartR3ParamsUpdate(pThis);
801	#endif
802	}
803	}
804	else
805	{
806	if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
807	{
808	#ifndef IN_RING3
809	if (!uartFifoUsedGet(&pThis->FifoXmit))
810	rc = VINF_IOM_R3_IOPORT_WRITE;
811	else
812	{
813	uartFifoPut(&pThis->FifoXmit, true /fOvrWr/, uVal);
814	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_THRE \| UART_REG_LSR_TEMT);
815	}
816	#else
817	uartFifoPut(&pThis->FifoXmit, true /fOvrWr/, uVal);
818	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_THRE \| UART_REG_LSR_TEMT);
819	pThis->fThreEmptyPending = false;
820	uartIrqUpdate(pThis);
821	if ( pThis->pDrvSerial
822	&& uartFifoUsedGet(&pThis->FifoXmit) == 1)
823	{
824	int rc2 = pThis->pDrvSerial->pfnDataAvailWrNotify(pThis->pDrvSerial);
825	if (RT_FAILURE(rc2))
826	LogRelMax(10, ("Serial#%d: Failed to send data with %Rrc\n", pThis->pDevInsR3->iInstance, rc2));
827	}
828	#endif
829	}
830	else
831	{
832	/* Notify the lower driver about available data only if the register was empty before. */
833	if (pThis->uRegLsr & UART_REG_LSR_THRE)
834	{
835	#ifndef IN_RING3
836	rc = VINF_IOM_R3_IOPORT_WRITE;
837	#else
838	pThis->uRegThr = uVal;
839	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_THRE \| UART_REG_LSR_TEMT);
840	pThis->fThreEmptyPending = false;
841	uartIrqUpdate(pThis);
842	if (pThis->pDrvSerial)
843	{
844	int rc2 = pThis->pDrvSerial->pfnDataAvailWrNotify(pThis->pDrvSerial);
845	if (RT_FAILURE(rc2))
846	LogRelMax(10, ("Serial#%d: Failed to send data with %Rrc\n", pThis->pDevInsR3->iInstance, rc2));
847	}
848	else
849	TMTimerSetRelative(pThis->CTX_SUFF(pTimerTxUnconnected), pThis->cSymbolXferTicks, NULL);
850	#endif
851	}
852	else
853	pThis->uRegThr = uVal;
854	}
855	}
856
857	return rc;
858	}
859
860
861	/**
862	* Write handler for the IER/DLM register (depending on the DLAB bit in LCR).
863	*
864	* @returns VBox status code.
865	* @param pThis The serial port instance.
866	* @param uVal The value to write.
867	*/
868	DECLINLINE(int) uartRegIerDlmWrite(PUARTCORE pThis, uint8_t uVal)
869	{
870	int rc = VINF_SUCCESS;
871
872	/* A set DLAB causes a write to the higher 8bits of the divisor latch. */
873	if (pThis->uRegLcr & UART_REG_LCR_DLAB)
874	{
875	if (uVal != (pThis->uRegDivisor & 0xff00) >> 8)
876	{
877	#ifndef IN_RING3
878	rc = VINF_IOM_R3_IOPORT_WRITE;
879	#else
880	pThis->uRegDivisor = (pThis->uRegDivisor & 0xff) \| (uVal << 8);
881	uartR3ParamsUpdate(pThis);
882	#endif
883	}
884	}
885	else
886	{
887	if (pThis->enmType < UARTTYPE_16750)
888	pThis->uRegIer = uVal & UART_REG_IER_MASK_WR;
889	else
890	pThis->uRegIer = uVal & UART_REG_IER_MASK_WR_16750;
891
892	if (pThis->uRegLsr & UART_REG_LSR_THRE)
893	pThis->fThreEmptyPending = true;
894
895	uartIrqUpdate(pThis);
896	}
897
898	return rc;
899	}
900
901
902	/**
903	* Write handler for the FCR register.
904	*
905	* @returns VBox status code.
906	* @param pThis The serial port instance.
907	* @param uVal The value to write.
908	*/
909	DECLINLINE(int) uartRegFcrWrite(PUARTCORE pThis, uint8_t uVal)
910	{
911	#ifndef IN_RING3
912	RT_NOREF(pThis, uVal);
913	return VINF_IOM_R3_IOPORT_WRITE;
914	#else
915	int rc = VINF_SUCCESS;
916	if ( pThis->enmType >= UARTTYPE_16550A
917	&& uVal != pThis->uRegFcr)
918	{
919	/* A change in the FIFO enable bit clears both FIFOs automatically. */
920	if ((uVal ^ pThis->uRegFcr) & UART_REG_FCR_FIFO_EN)
921	{
922	uartFifoClear(&pThis->FifoXmit);
923	uartFifoClear(&pThis->FifoRecv);
924
925	/*
926	* If the FIFO is about to be enabled and the DR bit is ready we have an unacknowledged
927	* byte in the RBR register which will be lost so we have to adjust the available bytes.
928	*/
929	if ( ASMAtomicReadU32(&pThis->cbAvailRdr) > 0
930	&& (uVal & UART_REG_FCR_FIFO_EN))
931	ASMAtomicDecU32(&pThis->cbAvailRdr);
932
933	/* Clear the DR bit too. */
934	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
935	}
936
937	if (rc == VINF_SUCCESS)
938	{
939	if (uVal & UART_REG_FCR_RCV_FIFO_RST)
940	{
941	TMTimerStop(pThis->CTX_SUFF(pTimerRcvFifoTimeout));
942	pThis->fIrqCtiPending = false;
943	uartFifoClear(&pThis->FifoRecv);
944	}
945	if (uVal & UART_REG_FCR_XMIT_FIFO_RST)
946	uartFifoClear(&pThis->FifoXmit);
947
948	/*
949	* The 64byte FIFO enable bit is only changeable for 16750
950	* and if the DLAB bit in LCR is set.
951	*/
952	if ( pThis->enmType < UARTTYPE_16750
953	\|\| !(pThis->uRegLcr & UART_REG_LCR_DLAB))
954	uVal &= ~UART_REG_FCR_64BYTE_FIFO_EN;
955	else /* Use previous value. */
956	uVal \|= pThis->uRegFcr & UART_REG_FCR_64BYTE_FIFO_EN;
957
958	if (uVal & UART_REG_FCR_64BYTE_FIFO_EN)
959	{
960	pThis->FifoRecv.cbMax = 64;
961	pThis->FifoXmit.cbMax = 64;
962	}
963	else
964	{
965	pThis->FifoRecv.cbMax = 16;
966	pThis->FifoXmit.cbMax = 16;
967	}
968
969	if (uVal & UART_REG_FCR_FIFO_EN)
970	{
971	uint8_t idxItl = UART_REG_FCR_RCV_LVL_IRQ_GET(uVal);
972	if (uVal & UART_REG_FCR_64BYTE_FIFO_EN)
973	pThis->FifoRecv.cbItl = s_aFifoItl[idxItl].cbItl64;
974	else
975	pThis->FifoRecv.cbItl = s_aFifoItl[idxItl].cbItl16;
976	}
977
978	/* The FIFO reset bits are self clearing. */
979	pThis->uRegFcr = uVal & UART_REG_FCR_MASK_STICKY;
980	uartIrqUpdate(pThis);
981	}
982
983	/* Fill in the next data. */
984	if (ASMAtomicReadU32(&pThis->cbAvailRdr))
985	uartR3DataFetch(pThis);
986	}
987
988	return rc;
989	#endif
990	}
991
992
993	/**
994	* Write handler for the LCR register.
995	*
996	* @returns VBox status code.
997	* @param pThis The serial port instance.
998	* @param uVal The value to write.
999	*/
1000	DECLINLINE(int) uartRegLcrWrite(PUARTCORE pThis, uint8_t uVal)
1001	{
1002	int rc = VINF_SUCCESS;
1003
1004	/* Any change except the DLAB bit causes a switch to R3. */
1005	if ((pThis->uRegLcr & ~UART_REG_LCR_DLAB) != (uVal & ~UART_REG_LCR_DLAB))
1006	{
1007	#ifndef IN_RING3
1008	rc = VINF_IOM_R3_IOPORT_WRITE;
1009	#else
1010	/* Check whether the BREAK bit changed before updating the LCR value. */
1011	bool fBrkEn = RT_BOOL(uVal & UART_REG_LCR_BRK_SET);
1012	bool fBrkChg = fBrkEn != RT_BOOL(pThis->uRegLcr & UART_REG_LCR_BRK_SET);
1013	pThis->uRegLcr = uVal;
1014	uartR3ParamsUpdate(pThis);
1015
1016	if ( fBrkChg
1017	&& pThis->pDrvSerial)
1018	pThis->pDrvSerial->pfnChgBrk(pThis->pDrvSerial, fBrkEn);
1019	#endif
1020	}
1021	else
1022	pThis->uRegLcr = uVal;
1023
1024	return rc;
1025	}
1026
1027
1028	/**
1029	* Write handler for the MCR register.
1030	*
1031	* @returns VBox status code.
1032	* @param pThis The serial port instance.
1033	* @param uVal The value to write.
1034	*/
1035	DECLINLINE(int) uartRegMcrWrite(PUARTCORE pThis, uint8_t uVal)
1036	{
1037	int rc = VINF_SUCCESS;
1038
1039	if (pThis->enmType < UARTTYPE_16750)
1040	uVal &= UART_REG_MCR_MASK_WR;
1041	else
1042	uVal &= UART_REG_MCR_MASK_WR_15750;
1043	if (pThis->uRegMcr != uVal)
1044	{
1045	#ifndef IN_RING3
1046	rc = VINF_IOM_R3_IOPORT_WRITE;
1047	#else
1048	/*
1049	* When loopback mode is activated the RTS, DTR, OUT1 and OUT2 lines are
1050	* disconnected and looped back to MSR.
1051	*/
1052	if ( (uVal & UART_REG_MCR_LOOP)
1053	&& !(pThis->uRegMcr & UART_REG_MCR_LOOP)
1054	&& pThis->pDrvSerial)
1055	pThis->pDrvSerial->pfnChgModemLines(pThis->pDrvSerial, false /fRts/, false /fDtr/);
1056
1057	pThis->uRegMcr = uVal;
1058	if (uVal & UART_REG_MCR_LOOP)
1059	{
1060	uint8_t uRegMsrSts = 0;
1061
1062	if (uVal & UART_REG_MCR_RTS)
1063	uRegMsrSts \|= UART_REG_MSR_CTS;
1064	if (uVal & UART_REG_MCR_DTR)
1065	uRegMsrSts \|= UART_REG_MSR_DSR;
1066	if (uVal & UART_REG_MCR_OUT1)
1067	uRegMsrSts \|= UART_REG_MSR_RI;
1068	if (uVal & UART_REG_MCR_OUT2)
1069	uRegMsrSts \|= UART_REG_MSR_DCD;
1070	uartR3MsrUpdate(pThis, uRegMsrSts);
1071	}
1072	else if (pThis->pDrvSerial)
1073	pThis->pDrvSerial->pfnChgModemLines(pThis->pDrvSerial,
1074	RT_BOOL(uVal & UART_REG_MCR_RTS),
1075	RT_BOOL(uVal & UART_REG_MCR_DTR));
1076	#endif
1077	}
1078
1079	return rc;
1080	}
1081
1082
1083	/**
1084	* Read handler for the RBR/DLL register (depending on the DLAB bit in LCR).
1085	*
1086	* @returns VBox status code.
1087	* @param pThis The serial port instance.
1088	* @param puVal Where to store the read value on success.
1089	*/
1090	DECLINLINE(int) uartRegRbrDllRead(PUARTCORE pThis, uint32_t *puVal)
1091	{
1092	int rc = VINF_SUCCESS;
1093
1094	/* A set DLAB causes a read from the lower 8bits of the divisor latch. */
1095	if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1096	*puVal = pThis->uRegDivisor & 0xff;
1097	else
1098	{
1099	if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
1100	{
1101	/*
1102	* Only go back to R3 if there is new data available for the FIFO
1103	* and we would clear the interrupt to fill it up again.
1104	*/
1105	if ( pThis->FifoRecv.cbUsed <= pThis->FifoRecv.cbItl
1106	&& ASMAtomicReadU32(&pThis->cbAvailRdr) > 0)
1107	{
1108	#ifndef IN_RING3
1109	rc = VINF_IOM_R3_IOPORT_READ;
1110	#else
1111	uartR3RecvFifoFill(pThis);
1112	#endif
1113	}
1114
1115	if (rc == VINF_SUCCESS)
1116	{
1117	*puVal = uartFifoGet(&pThis->FifoRecv);
1118	pThis->fIrqCtiPending = false;
1119	if (!pThis->FifoRecv.cbUsed)
1120	{
1121	TMTimerStop(pThis->CTX_SUFF(pTimerRcvFifoTimeout));
1122	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
1123	}
1124	else if (pThis->FifoRecv.cbUsed < pThis->FifoRecv.cbItl)
1125	TMTimerSetRelative(pThis->CTX_SUFF(pTimerRcvFifoTimeout), pThis->cSymbolXferTicks * 4, NULL);
1126	uartIrqUpdate(pThis);
1127	}
1128	}
1129	else
1130	{
1131	*puVal = pThis->uRegRbr;
1132
1133	if (pThis->uRegLsr & UART_REG_LSR_DR)
1134	{
1135	Assert(pThis->cbAvailRdr);
1136	uint32_t cbAvail = ASMAtomicDecU32(&pThis->cbAvailRdr);
1137	if (!cbAvail)
1138	{
1139	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_DR);
1140	uartIrqUpdate(pThis);
1141	}
1142	else
1143	{
1144	#ifndef IN_RING3
1145	/* Restore state and go back to R3. */
1146	ASMAtomicIncU32(&pThis->cbAvailRdr);
1147	rc = VINF_IOM_R3_IOPORT_READ;
1148	#else
1149	/* Fetch new data and keep the DR bit set. */
1150	uartR3DataFetch(pThis);
1151	#endif
1152	}
1153	}
1154	}
1155	}
1156
1157	return rc;
1158	}
1159
1160
1161	/**
1162	* Read handler for the IER/DLM register (depending on the DLAB bit in LCR).
1163	*
1164	* @returns VBox status code.
1165	* @param pThis The serial port instance.
1166	* @param puVal Where to store the read value on success.
1167	*/
1168	DECLINLINE(int) uartRegIerDlmRead(PUARTCORE pThis, uint32_t *puVal)
1169	{
1170	int rc = VINF_SUCCESS;
1171
1172	/* A set DLAB causes a read from the upper 8bits of the divisor latch. */
1173	if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1174	*puVal = (pThis->uRegDivisor & 0xff00) >> 8;
1175	else
1176	*puVal = pThis->uRegIer;
1177
1178	return rc;
1179	}
1180
1181
1182	/**
1183	* Read handler for the IIR register.
1184	*
1185	* @returns VBox status code.
1186	* @param pThis The serial port instance.
1187	* @param puVal Where to store the read value on success.
1188	*/
1189	DECLINLINE(int) uartRegIirRead(PUARTCORE pThis, uint32_t *puVal)
1190	{
1191	*puVal = pThis->uRegIir;
1192	/* Reset the THRE empty interrupt id when this gets returned to the guest (see table 3 UART Reset configuration). */
1193	if (UART_REG_IIR_ID_GET(pThis->uRegIir) == UART_REG_IIR_ID_THRE)
1194	{
1195	pThis->fThreEmptyPending = false;
1196	uartIrqUpdate(pThis);
1197	}
1198	return VINF_SUCCESS;
1199	}
1200
1201
1202	/**
1203	* Read handler for the LSR register.
1204	*
1205	* @returns VBox status code.
1206	* @param pThis The serial port instance.
1207	* @param puVal Where to store the read value on success.
1208	*/
1209	DECLINLINE(int) uartRegLsrRead(PUARTCORE pThis, uint32_t *puVal)
1210	{
1211	int rc = VINF_SUCCESS;
1212
1213	/* Yield if configured and there is no data available. */
1214	if ( !(pThis->uRegLsr & UART_REG_LSR_DR)
1215	&& (pThis->fFlags & UART_CORE_YIELD_ON_LSR_READ))
1216	{
1217	#ifndef IN_RING3
1218	return VINF_IOM_R3_IOPORT_READ;
1219	#else
1220	RTThreadYield();
1221	#endif
1222	}
1223
1224	*puVal = pThis->uRegLsr;
1225	/*
1226	* Reading this register clears the Overrun (OE), Parity (PE) and Framing (FE) error
1227	* as well as the Break Interrupt (BI).
1228	*/
1229	UART_REG_CLR(pThis->uRegLsr, UART_REG_LSR_BITS_IIR_RCL);
1230	uartIrqUpdate(pThis);
1231
1232	return rc;
1233	}
1234
1235
1236	/**
1237	* Read handler for the MSR register.
1238	*
1239	* @returns VBox status code.
1240	* @param pThis The serial port instance.
1241	* @param puVal Where to store the read value on success.
1242	*/
1243	DECLINLINE(int) uartRegMsrRead(PUARTCORE pThis, uint32_t *puVal)
1244	{
1245	*puVal = pThis->uRegMsr;
1246
1247	/* Clear any of the delta bits. */
1248	UART_REG_CLR(pThis->uRegMsr, UART_REG_MSR_BITS_IIR_MS);
1249	uartIrqUpdate(pThis);
1250	return VINF_SUCCESS;
1251	}
1252
1253
1254	#ifdef LOG_ENABLED
1255	/**
1256	* Converts the register index into a sensible memnonic.
1257	*
1258	* @returns Register memnonic.
1259	* @param pThis The serial port instance.
1260	* @param idxReg Register index.
1261	* @param fWrite Flag whether the register gets written.
1262	*/
1263	DECLINLINE(const char *) uartRegIdx2Str(PUARTCORE pThis, uint8_t idxReg, bool fWrite)
1264	{
1265	const char *psz = "INV";
1266
1267	switch (idxReg)
1268	{
1269	/case UART_REG_THR_DLL_INDEX:/
1270	case UART_REG_RBR_DLL_INDEX:
1271	if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1272	psz = "DLL";
1273	else if (fWrite)
1274	psz = "THR";
1275	else
1276	psz = "RBR";
1277	break;
1278	case UART_REG_IER_DLM_INDEX:
1279	if (pThis->uRegLcr & UART_REG_LCR_DLAB)
1280	psz = "DLM";
1281	else
1282	psz = "IER";
1283	break;
1284	/case UART_REG_IIR_INDEX:/
1285	case UART_REG_FCR_INDEX:
1286	if (fWrite)
1287	psz = "FCR";
1288	else
1289	psz = "IIR";
1290	break;
1291	case UART_REG_LCR_INDEX:
1292	psz = "LCR";
1293	break;
1294	case UART_REG_MCR_INDEX:
1295	psz = "MCR";
1296	break;
1297	case UART_REG_LSR_INDEX:
1298	psz = "LSR";
1299	break;
1300	case UART_REG_MSR_INDEX:
1301	psz = "MSR";
1302	break;
1303	case UART_REG_SCR_INDEX:
1304	psz = "SCR";
1305	break;
1306	}
1307
1308	return psz;
1309	}
1310	#endif
1311
1312
1313	DECLHIDDEN(int) uartRegWrite(PUARTCORE pThis, uint32_t uReg, uint32_t u32, size_t cb)
1314	{
1315	AssertMsgReturn(cb == 1, ("uReg=%#x cb=%d u32=%#x\n", uReg, cb, u32), VINF_SUCCESS);
1316
1317	int rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_R3_IOPORT_WRITE);
1318	if (rc != VINF_SUCCESS)
1319	return rc;
1320
1321	uint8_t idxReg = uReg & 0x7;
1322	LogFlowFunc(("pThis=%#p uReg=%u{%s} u32=%#x cb=%u\n",
1323	pThis, uReg, uartRegIdx2Str(pThis, idxReg, true /fWrite/), u32, cb));
1324
1325	uint8_t uVal = (uint8_t)u32;
1326	switch (idxReg)
1327	{
1328	case UART_REG_THR_DLL_INDEX:
1329	rc = uartRegThrDllWrite(pThis, uVal);
1330	break;
1331	case UART_REG_IER_DLM_INDEX:
1332	rc = uartRegIerDlmWrite(pThis, uVal);
1333	break;
1334	case UART_REG_FCR_INDEX:
1335	rc = uartRegFcrWrite(pThis, uVal);
1336	break;
1337	case UART_REG_LCR_INDEX:
1338	rc = uartRegLcrWrite(pThis, uVal);
1339	break;
1340	case UART_REG_MCR_INDEX:
1341	rc = uartRegMcrWrite(pThis, uVal);
1342	break;
1343	case UART_REG_SCR_INDEX:
1344	pThis->uRegScr = u32;
1345	break;
1346	default:
1347	break;
1348	}
1349
1350	PDMCritSectLeave(&pThis->CritSect);
1351	LogFlowFunc(("-> %Rrc\n", rc));
1352	return rc;
1353	}
1354
1355
1356	DECLHIDDEN(int) uartRegRead(PUARTCORE pThis, uint32_t uReg, uint32_t *pu32, size_t cb)
1357	{
1358	if (cb != 1)
1359	return VERR_IOM_IOPORT_UNUSED;
1360
1361	int rc = PDMCritSectEnter(&pThis->CritSect, VINF_IOM_R3_IOPORT_READ);
1362	if (rc != VINF_SUCCESS)
1363	return rc;
1364
1365	uint8_t idxReg = uReg & 0x7;
1366	switch (idxReg)
1367	{
1368	case UART_REG_RBR_DLL_INDEX:
1369	rc = uartRegRbrDllRead(pThis, pu32);
1370	break;
1371	case UART_REG_IER_DLM_INDEX:
1372	rc = uartRegIerDlmRead(pThis, pu32);
1373	break;
1374	case UART_REG_IIR_INDEX:
1375	rc = uartRegIirRead(pThis, pu32);
1376	break;
1377	case UART_REG_LCR_INDEX:
1378	*pu32 = pThis->uRegLcr;
1379	break;
1380	case UART_REG_MCR_INDEX:
1381	*pu32 = pThis->uRegMcr;
1382	break;
1383	case UART_REG_LSR_INDEX:
1384	rc = uartRegLsrRead(pThis, pu32);
1385	break;
1386	case UART_REG_MSR_INDEX:
1387	rc = uartRegMsrRead(pThis, pu32);
1388	break;
1389	case UART_REG_SCR_INDEX:
1390	*pu32 = pThis->uRegScr;
1391	break;
1392	default:
1393	rc = VERR_IOM_IOPORT_UNUSED;
1394	}
1395
1396	PDMCritSectLeave(&pThis->CritSect);
1397	LogFlowFunc(("pThis=%#p uReg=%u{%s} u32=%#x cb=%u -> %Rrc\n",
1398	pThis, uReg, uartRegIdx2Str(pThis, idxReg, false /fWrite/), *pu32, cb, rc));
1399	return rc;
1400	}
1401
1402
1403	#ifdef IN_RING3
1404
1405	/* -=-=-=-=-=-=-=-=- Timer callbacks -=-=-=-=-=-=-=-=- */
1406
1407	/**
1408	* @callback_method_impl{FNTMTIMERDEV, Fifo timer function.}
1409	*/
1410	static DECLCALLBACK(void) uartR3RcvFifoTimeoutTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
1411	{
1412	LogFlowFunc(("pDevIns=%#p pTimer=%#p pvUser=%#p\n", pDevIns, pTimer, pvUser));
1413	RT_NOREF(pDevIns, pTimer);
1414	PUARTCORE pThis = (PUARTCORE)pvUser;
1415	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1416	if (pThis->FifoRecv.cbUsed < pThis->FifoRecv.cbItl)
1417	{
1418	pThis->fIrqCtiPending = true;
1419	uartIrqUpdate(pThis);
1420	}
1421	PDMCritSectLeave(&pThis->CritSect);
1422	}
1423
1424	/**
1425	* @callback_method_impl{FNTMTIMERDEV, TX timer function when there is no driver connected for draining the THR/FIFO.}
1426	*/
1427	static DECLCALLBACK(void) uartR3TxUnconnectedTimer(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
1428	{
1429	LogFlowFunc(("pDevIns=%#p pTimer=%#p pvUser=%#p\n", pDevIns, pTimer, pvUser));
1430	RT_NOREF(pDevIns, pTimer);
1431	PUARTCORE pThis = (PUARTCORE)pvUser;
1432	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1433	uint8_t bIgnore = 0;
1434	size_t cbRead = 0;
1435	uartR3TxQueueCopyFrom(pThis, &bIgnore, sizeof(uint8_t), &cbRead);
1436	if (cbRead == 1)
1437	TMTimerSetRelative(pThis->CTX_SUFF(pTimerTxUnconnected), pThis->cSymbolXferTicks, NULL);
1438	PDMCritSectLeave(&pThis->CritSect);
1439	}
1440
1441
1442	/* -=-=-=-=-=-=-=-=- PDMISERIALPORT on LUN#0 -=-=-=-=-=-=-=-=- */
1443
1444
1445	/**
1446	* @interface_method_impl{PDMISERIALPORT,pfnDataAvailRdrNotify}
1447	*/
1448	static DECLCALLBACK(int) uartR3DataAvailRdrNotify(PPDMISERIALPORT pInterface, size_t cbAvail)
1449	{
1450	LogFlowFunc(("pInterface=%#p cbAvail=%zu\n", pInterface, cbAvail));
1451	PUARTCORE pThis = RT_FROM_MEMBER(pInterface, UARTCORE, ISerialPort);
1452
1453	AssertMsg((uint32_t)cbAvail == cbAvail, ("Too much data available\n"));
1454
1455	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1456	uint32_t cbAvailOld = ASMAtomicAddU32(&pThis->cbAvailRdr, (uint32_t)cbAvail);
1457	LogFlow((" cbAvailRdr=%u -> cbAvailRdr=%u\n", cbAvailOld, cbAvail + cbAvailOld));
1458	if (pThis->uRegFcr & UART_REG_FCR_FIFO_EN)
1459	uartR3RecvFifoFill(pThis);
1460	else if (!cbAvailOld)
1461	{
1462	size_t cbRead = 0;
1463	int rc = pThis->pDrvSerial->pfnReadRdr(pThis->pDrvSerial, &pThis->uRegRbr, 1, &cbRead);
1464	AssertMsg(RT_SUCCESS(rc) && cbRead == 1, ("This shouldn't fail and always return one byte!\n")); RT_NOREF(rc);
1465	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_DR);
1466	uartIrqUpdate(pThis);
1467	}
1468	PDMCritSectLeave(&pThis->CritSect);
1469
1470	return VINF_SUCCESS;
1471	}
1472
1473
1474	/**
1475	* @interface_method_impl{PDMISERIALPORT,pfnDataSentNotify}
1476	*/
1477	static DECLCALLBACK(int) uartR3DataSentNotify(PPDMISERIALPORT pInterface)
1478	{
1479	LogFlowFunc(("pInterface=%#p\n", pInterface));
1480	PUARTCORE pThis = RT_FROM_MEMBER(pInterface, UARTCORE, ISerialPort);
1481
1482	/* Set the transmitter empty bit because everything was sent. */
1483	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1484	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_TEMT);
1485	uartIrqUpdate(pThis);
1486	PDMCritSectLeave(&pThis->CritSect);
1487	return VINF_SUCCESS;
1488	}
1489
1490
1491	/**
1492	* @interface_method_impl{PDMISERIALPORT,pfnReadWr}
1493	*/
1494	static DECLCALLBACK(int) uartR3ReadWr(PPDMISERIALPORT pInterface, void pvBuf, size_t cbRead, size_t pcbRead)
1495	{
1496	LogFlowFunc(("pInterface=%#p pvBuf=%#p cbRead=%zu pcbRead=%#p\n", pInterface, pvBuf, cbRead, pcbRead));
1497	PUARTCORE pThis = RT_FROM_MEMBER(pInterface, UARTCORE, ISerialPort);
1498
1499	AssertReturn(cbRead > 0, VERR_INVALID_PARAMETER);
1500
1501	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1502	uartR3TxQueueCopyFrom(pThis, pvBuf, cbRead, pcbRead);
1503	PDMCritSectLeave(&pThis->CritSect);
1504
1505	LogFlowFunc(("-> VINF_SUCCESS{pcbRead=%zu}\n", pcbRead));
1506	return VINF_SUCCESS;
1507	}
1508
1509
1510	/**
1511	* @interface_method_impl{PDMISERIALPORT,pfnNotifyStsLinesChanged}
1512	*/
1513	static DECLCALLBACK(int) uartR3NotifyStsLinesChanged(PPDMISERIALPORT pInterface, uint32_t fNewStatusLines)
1514	{
1515	LogFlowFunc(("pInterface=%#p fNewStatusLines=%#x\n", pInterface, fNewStatusLines));
1516	PUARTCORE pThis = RT_FROM_MEMBER(pInterface, UARTCORE, ISerialPort);
1517
1518	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1519	uartR3StsLinesUpdate(pThis, fNewStatusLines);
1520	PDMCritSectLeave(&pThis->CritSect);
1521	return VINF_SUCCESS;
1522	}
1523
1524
1525	/**
1526	* @interface_method_impl{PDMISERIALPORT,pfnNotifyBrk}
1527	*/
1528	static DECLCALLBACK(int) uartR3NotifyBrk(PPDMISERIALPORT pInterface)
1529	{
1530	LogFlowFunc(("pInterface=%#p\n", pInterface));
1531	PUARTCORE pThis = RT_FROM_MEMBER(pInterface, UARTCORE, ISerialPort);
1532
1533	PDMCritSectEnter(&pThis->CritSect, VERR_IGNORED);
1534	UART_REG_SET(pThis->uRegLsr, UART_REG_LSR_BI);
1535	uartIrqUpdate(pThis);
1536	PDMCritSectLeave(&pThis->CritSect);
1537	return VINF_SUCCESS;
1538	}
1539
1540
1541	/* -=-=-=-=-=-=-=-=- PDMIBASE -=-=-=-=-=-=-=-=- */
1542
1543	/**
1544	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
1545	*/
1546	static DECLCALLBACK(void ) uartR3QueryInterface(PPDMIBASE pInterface, const char pszIID)
1547	{
1548	PUARTCORE pThis = RT_FROM_MEMBER(pInterface, UARTCORE, IBase);
1549	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->IBase);
1550	PDMIBASE_RETURN_INTERFACE(pszIID, PDMISERIALPORT, &pThis->ISerialPort);
1551	return NULL;
1552	}
1553
1554
1555	DECLHIDDEN(int) uartR3SaveExec(PUARTCORE pThis, PSSMHANDLE pSSM)
1556	{
1557	SSMR3PutU16(pSSM, pThis->uRegDivisor);
1558	SSMR3PutU8(pSSM, pThis->uRegRbr);
1559	SSMR3PutU8(pSSM, pThis->uRegThr);
1560	SSMR3PutU8(pSSM, pThis->uRegIer);
1561	SSMR3PutU8(pSSM, pThis->uRegIir);
1562	SSMR3PutU8(pSSM, pThis->uRegFcr);
1563	SSMR3PutU8(pSSM, pThis->uRegLcr);
1564	SSMR3PutU8(pSSM, pThis->uRegMcr);
1565	SSMR3PutU8(pSSM, pThis->uRegLsr);
1566	SSMR3PutU8(pSSM, pThis->uRegMsr);
1567	SSMR3PutU8(pSSM, pThis->uRegScr);
1568	SSMR3PutBool(pSSM, pThis->fIrqCtiPending);
1569	SSMR3PutBool(pSSM, pThis->fThreEmptyPending);
1570	SSMR3PutU8(pSSM, pThis->FifoXmit.cbMax);
1571	SSMR3PutU8(pSSM, pThis->FifoXmit.cbItl);
1572	SSMR3PutU8(pSSM, pThis->FifoRecv.cbMax);
1573	SSMR3PutU8(pSSM, pThis->FifoRecv.cbItl);
1574
1575	int rc = TMR3TimerSave(pThis->pTimerRcvFifoTimeoutR3, pSSM);
1576	if (RT_SUCCESS(rc))
1577	rc = TMR3TimerSave(pThis->pTimerTxUnconnectedR3, pSSM);
1578
1579	return rc;
1580	}
1581
1582
1583	DECLHIDDEN(int) uartR3LoadExec(PUARTCORE pThis, PSSMHANDLE pSSM, uint32_t uVersion, uint32_t uPass,
1584	uint8_t pbIrq, RTIOPORT pPortBase)
1585	{
1586	RT_NOREF(uPass);
1587	int rc;
1588
1589	if (uVersion > UART_SAVED_STATE_VERSION_LEGACY_CODE)
1590	{
1591	SSMR3GetU16(pSSM, &pThis->uRegDivisor);
1592	SSMR3GetU8(pSSM, &pThis->uRegRbr);
1593	SSMR3GetU8(pSSM, &pThis->uRegThr);
1594	SSMR3GetU8(pSSM, &pThis->uRegIer);
1595	SSMR3GetU8(pSSM, &pThis->uRegIir);
1596	SSMR3GetU8(pSSM, &pThis->uRegFcr);
1597	SSMR3GetU8(pSSM, &pThis->uRegLcr);
1598	SSMR3GetU8(pSSM, &pThis->uRegMcr);
1599	SSMR3GetU8(pSSM, &pThis->uRegLsr);
1600	SSMR3GetU8(pSSM, &pThis->uRegMsr);
1601	SSMR3GetU8(pSSM, &pThis->uRegScr);
1602	SSMR3GetBool(pSSM, &pThis->fIrqCtiPending);
1603	SSMR3GetBool(pSSM, &pThis->fThreEmptyPending);
1604	SSMR3GetU8(pSSM, &pThis->FifoXmit.cbMax);
1605	SSMR3GetU8(pSSM, &pThis->FifoXmit.cbItl);
1606	SSMR3GetU8(pSSM, &pThis->FifoRecv.cbMax);
1607	SSMR3GetU8(pSSM, &pThis->FifoRecv.cbItl);
1608
1609	rc = TMR3TimerLoad(pThis->pTimerRcvFifoTimeoutR3, pSSM);
1610	if (uVersion > UART_SAVED_STATE_VERSION_PRE_UNCONNECTED_TX_TIMER)
1611	rc = TMR3TimerLoad(pThis->pTimerTxUnconnectedR3, pSSM);
1612	}
1613	else
1614	{
1615	AssertPtr(pbIrq);
1616	AssertPtr(pPortBase);
1617	if (uVersion == UART_SAVED_STATE_VERSION_16450)
1618	{
1619	pThis->enmType = UARTTYPE_16450;
1620	LogRel(("Serial#%d: falling back to 16450 mode from load state\n", pThis->pDevInsR3->iInstance));
1621	}
1622
1623	SSMR3GetU16(pSSM, &pThis->uRegDivisor);
1624	SSMR3GetU8(pSSM, &pThis->uRegRbr);
1625	SSMR3GetU8(pSSM, &pThis->uRegIer);
1626	SSMR3GetU8(pSSM, &pThis->uRegLcr);
1627	SSMR3GetU8(pSSM, &pThis->uRegMcr);
1628	SSMR3GetU8(pSSM, &pThis->uRegLsr);
1629	SSMR3GetU8(pSSM, &pThis->uRegMsr);
1630	SSMR3GetU8(pSSM, &pThis->uRegScr);
1631	if (uVersion > UART_SAVED_STATE_VERSION_16450)
1632	SSMR3GetU8(pSSM, &pThis->uRegFcr);
1633
1634	int32_t iTmp = 0;
1635	SSMR3GetS32(pSSM, &iTmp);
1636	pThis->fThreEmptyPending = RT_BOOL(iTmp);
1637
1638	rc = SSMR3GetS32(pSSM, &iTmp);
1639	AssertRCReturn(rc, rc);
1640	*pbIrq = (uint8_t)iTmp;
1641
1642	SSMR3Skip(pSSM, sizeof(int32_t)); /* was: last_break_enable */
1643
1644	uint32_t uPortBaseTmp = 0;
1645	rc = SSMR3GetU32(pSSM, &uPortBaseTmp);
1646	AssertRCReturn(rc, rc);
1647	*pPortBase = (RTIOPORT)uPortBaseTmp;
1648
1649	rc = SSMR3Skip(pSSM, sizeof(bool)); /* was: msr_changed */
1650	if ( RT_SUCCESS(rc)
1651	&& uVersion > UART_SAVED_STATE_VERSION_MISSING_BITS)
1652	{
1653	SSMR3GetU8(pSSM, &pThis->uRegThr);
1654	SSMR3Skip(pSSM, sizeof(uint8_t)); /* The old transmit shift register, not used anymore. */
1655	SSMR3GetU8(pSSM, &pThis->uRegIir);
1656
1657	int32_t iTimeoutPending = 0;
1658	SSMR3GetS32(pSSM, &iTimeoutPending);
1659	pThis->fIrqCtiPending = RT_BOOL(iTimeoutPending);
1660
1661	rc = TMR3TimerLoad(pThis->pTimerRcvFifoTimeoutR3, pSSM);
1662	AssertRCReturn(rc, rc);
1663
1664	bool fWasActiveIgn;
1665	rc = TMR3TimerSkip(pSSM, &fWasActiveIgn); /* was: transmit_timerR3 */
1666	AssertRCReturn(rc, rc);
1667
1668	SSMR3GetU8(pSSM, &pThis->FifoRecv.cbItl);
1669	rc = SSMR3GetU8(pSSM, &pThis->FifoRecv.cbItl);
1670	}
1671	}
1672
1673	return rc;
1674	}
1675
1676
1677	DECLHIDDEN(int) uartR3LoadDone(PUARTCORE pThis, PSSMHANDLE pSSM)
1678	{
1679	RT_NOREF(pSSM);
1680
1681	uartR3ParamsUpdate(pThis);
1682	uartIrqUpdate(pThis);
1683
1684	if (pThis->pDrvSerial)
1685	{
1686	/* Set the modem lines to reflect the current state. */
1687	int rc = pThis->pDrvSerial->pfnChgModemLines(pThis->pDrvSerial,
1688	RT_BOOL(pThis->uRegMcr & UART_REG_MCR_RTS),
1689	RT_BOOL(pThis->uRegMcr & UART_REG_MCR_DTR));
1690	if (RT_FAILURE(rc))
1691	LogRel(("Serial#%d: Failed to set modem lines with %Rrc during saved state load\n",
1692	pThis->pDevInsR3->iInstance, rc));
1693
1694	uint32_t fStsLines = 0;
1695	rc = pThis->pDrvSerial->pfnQueryStsLines(pThis->pDrvSerial, &fStsLines);
1696	if (RT_SUCCESS(rc))
1697	uartR3StsLinesUpdate(pThis, fStsLines);
1698	else
1699	LogRel(("Serial#%d: Failed to query status line status with %Rrc during reset\n",
1700	pThis->pDevInsR3->iInstance, rc));
1701	}
1702
1703	return VINF_SUCCESS;
1704	}
1705
1706
1707	DECLHIDDEN(void) uartR3Relocate(PUARTCORE pThis, RTGCINTPTR offDelta)
1708	{
1709	RT_NOREF(offDelta);
1710	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pThis->pDevInsR3);
1711	pThis->pTimerRcvFifoTimeoutRC = TMTimerRCPtr(pThis->pTimerRcvFifoTimeoutR3);
1712	pThis->pTimerTxUnconnectedRC = TMTimerRCPtr(pThis->pTimerTxUnconnectedR3);
1713	}
1714
1715
1716	DECLHIDDEN(void) uartR3Reset(PUARTCORE pThis)
1717	{
1718	pThis->uRegDivisor = 0x0c; /* Default to 9600 Baud. */
1719	pThis->uRegRbr = 0;
1720	pThis->uRegThr = 0;
1721	pThis->uRegIer = 0;
1722	pThis->uRegIir = UART_REG_IIR_IP_NO_INT;
1723	pThis->uRegFcr = 0;
1724	pThis->uRegLcr = 0; /* 5 data bits, no parity, 1 stop bit. */
1725	pThis->uRegMcr = 0;
1726	pThis->uRegLsr = UART_REG_LSR_THRE \| UART_REG_LSR_TEMT;
1727	pThis->uRegMsr = 0; /* Updated below. */
1728	pThis->uRegScr = 0;
1729	pThis->fIrqCtiPending = false;
1730	pThis->fThreEmptyPending = true;
1731
1732	/* Standard FIFO size for 15550A. */
1733	pThis->FifoXmit.cbMax = 16;
1734	pThis->FifoRecv.cbMax = 16;
1735	pThis->FifoRecv.cbItl = 1;
1736
1737	uartR3XferReset(pThis);
1738	}
1739
1740
1741	DECLHIDDEN(int) uartR3Attach(PUARTCORE pThis, unsigned iLUN)
1742	{
1743	int rc = PDMDevHlpDriverAttach(pThis->pDevInsR3, iLUN, &pThis->IBase, &pThis->pDrvBase, "Serial Char");
1744	if (RT_SUCCESS(rc))
1745	{
1746	pThis->pDrvSerial = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMISERIALCONNECTOR);
1747	if (!pThis->pDrvSerial)
1748	{
1749	AssertLogRelMsgFailed(("Configuration error: instance %d has no serial interface!\n", pThis->pDevInsR3->iInstance));
1750	return VERR_PDM_MISSING_INTERFACE;
1751	}
1752	uartR3XferReset(pThis);
1753	}
1754	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
1755	{
1756	pThis->pDrvBase = NULL;
1757	pThis->pDrvSerial = NULL;
1758	rc = VINF_SUCCESS;
1759	uartR3XferReset(pThis);
1760	LogRel(("Serial#%d: no unit\n", pThis->pDevInsR3->iInstance));
1761	}
1762	else /* Don't call VMSetError here as we assume that the driver already set an appropriate error */
1763	LogRel(("Serial#%d: Failed to attach to serial driver. rc=%Rrc\n", pThis->pDevInsR3->iInstance, rc));
1764
1765	return rc;
1766	}
1767
1768
1769	DECLHIDDEN(void) uartR3Detach(PUARTCORE pThis)
1770	{
1771	/* Zero out important members. */
1772	pThis->pDrvBase = NULL;
1773	pThis->pDrvSerial = NULL;
1774	uartR3XferReset(pThis);
1775	}
1776
1777
1778	DECLHIDDEN(void) uartR3Destruct(PUARTCORE pThis)
1779	{
1780	PDMR3CritSectDelete(&pThis->CritSect);
1781	}
1782
1783
1784	DECLHIDDEN(int) uartR3Init(PUARTCORE pThis, PPDMDEVINS pDevInsR3, UARTTYPE enmType, unsigned iLUN, uint32_t fFlags,
1785	R3PTRTYPE(PFNUARTCOREIRQREQ) pfnUartIrqReqR3, R0PTRTYPE(PFNUARTCOREIRQREQ) pfnUartIrqReqR0,
1786	RCPTRTYPE(PFNUARTCOREIRQREQ) pfnUartIrqReqRC)
1787	{
1788	int rc = VINF_SUCCESS;
1789
1790	/*
1791	* Initialize the instance data.
1792	* (Do this early or the destructor might choke on something!)
1793	*/
1794	pThis->pDevInsR3 = pDevInsR3;
1795	pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevInsR3);
1796	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevInsR3);
1797	pThis->iLUN = iLUN;
1798	pThis->enmType = enmType;
1799	pThis->fFlags = fFlags;
1800	pThis->pfnUartIrqReqR3 = pfnUartIrqReqR3;
1801	pThis->pfnUartIrqReqR0 = pfnUartIrqReqR0;
1802	pThis->pfnUartIrqReqRC = pfnUartIrqReqRC;
1803
1804	/* IBase */
1805	pThis->IBase.pfnQueryInterface = uartR3QueryInterface;
1806
1807	/* ISerialPort */
1808	pThis->ISerialPort.pfnDataAvailRdrNotify = uartR3DataAvailRdrNotify;
1809	pThis->ISerialPort.pfnDataSentNotify = uartR3DataSentNotify;
1810	pThis->ISerialPort.pfnReadWr = uartR3ReadWr;
1811	pThis->ISerialPort.pfnNotifyStsLinesChanged = uartR3NotifyStsLinesChanged;
1812	pThis->ISerialPort.pfnNotifyBrk = uartR3NotifyBrk;
1813
1814	rc = PDMDevHlpCritSectInit(pDevInsR3, &pThis->CritSect, RT_SRC_POS, "Uart{%s#%d}#%d",
1815	pDevInsR3->pReg->szName, pDevInsR3->iInstance, iLUN);
1816	AssertRCReturn(rc, rc);
1817
1818	/*
1819	* Attach the char driver and get the interfaces.
1820	*/
1821	rc = PDMDevHlpDriverAttach(pDevInsR3, iLUN, &pThis->IBase, &pThis->pDrvBase, "UART");
1822	if (RT_SUCCESS(rc))
1823	{
1824	pThis->pDrvSerial = PDMIBASE_QUERY_INTERFACE(pThis->pDrvBase, PDMISERIALCONNECTOR);
1825	if (!pThis->pDrvSerial)
1826	{
1827	AssertLogRelMsgFailed(("Configuration error: instance %d has no serial interface!\n", iLUN));
1828	return VERR_PDM_MISSING_INTERFACE;
1829	}
1830	}
1831	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
1832	{
1833	pThis->pDrvBase = NULL;
1834	pThis->pDrvSerial = NULL;
1835	LogRel(("Serial#%d: no unit\n", iLUN));
1836	}
1837	else
1838	{
1839	AssertLogRelMsgFailed(("Serial#%d: Failed to attach to char driver. rc=%Rrc\n", iLUN, rc));
1840	/* Don't call VMSetError here as we assume that the driver already set an appropriate error */
1841	return rc;
1842	}
1843
1844	/*
1845	* Create the receive FIFO character timeout indicator timer.
1846	*/
1847	rc = PDMDevHlpTMTimerCreate(pDevInsR3, TMCLOCK_VIRTUAL, uartR3RcvFifoTimeoutTimer, pThis,
1848	TMTIMER_FLAGS_NO_CRIT_SECT, "UART Rcv FIFO Timer",
1849	&pThis->pTimerRcvFifoTimeoutR3);
1850	AssertRCReturn(rc, rc);
1851
1852	rc = TMR3TimerSetCritSect(pThis->pTimerRcvFifoTimeoutR3, &pThis->CritSect);
1853	AssertRCReturn(rc, rc);
1854
1855	pThis->pTimerRcvFifoTimeoutR0 = TMTimerR0Ptr(pThis->pTimerRcvFifoTimeoutR3);
1856	pThis->pTimerRcvFifoTimeoutRC = TMTimerRCPtr(pThis->pTimerRcvFifoTimeoutR3);
1857
1858	/*
1859	* Create the transmit timer when no device is connected.
1860	*/
1861	rc = PDMDevHlpTMTimerCreate(pDevInsR3, TMCLOCK_VIRTUAL, uartR3TxUnconnectedTimer, pThis,
1862	TMTIMER_FLAGS_NO_CRIT_SECT, "UART TX uncon. Timer",
1863	&pThis->pTimerTxUnconnectedR3);
1864	AssertRCReturn(rc, rc);
1865
1866	rc = TMR3TimerSetCritSect(pThis->pTimerTxUnconnectedR3, &pThis->CritSect);
1867	AssertRCReturn(rc, rc);
1868
1869	pThis->pTimerTxUnconnectedR0 = TMTimerR0Ptr(pThis->pTimerTxUnconnectedR3);
1870	pThis->pTimerTxUnconnectedRC = TMTimerRCPtr(pThis->pTimerTxUnconnectedR3);
1871
1872	uartR3Reset(pThis);
1873	return VINF_SUCCESS;
1874	}
1875
1876	#endif /* IN_RING3 */
1877
1878	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Serial/UartCore.cpp@ 75265

Download in other formats: