ATAController.h@ 33016

Last change on this file since 33016 was 29758, checked in by vboxsync, 15 years ago
AHCI: Fix crash on reset after a snapshot was taken. The Driver needs to be updated in the ATA emulation
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 18.8 KB

Line
1	/* $Id: ATAController.h 29758 2010-05-24 08:38:48Z vboxsync $ */
2	/** @file
3	* DevATA, DevAHCI - Shared ATA/ATAPI controller types.
4	*/
5
6	/*
7	* Copyright (C) 2006-2008 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18	#ifndef ___Storage_ATAController_h
19	#define ___Storage_ATAController_h
20
21	/*******************************************************************************
22	* Header Files *
23	*******************************************************************************/
24	#include <VBox/pdmdev.h>
25	#ifdef IN_RING3
26	# include <iprt/semaphore.h>
27	# include <iprt/thread.h>
28	#endif /* IN_RING3 */
29	#include <iprt/critsect.h>
30	#include <VBox/stam.h>
31
32	#include "PIIX3ATABmDma.h"
33	#include "ide.h"
34
35
36	/*******************************************************************************
37	* Defined Constants And Macros *
38	*******************************************************************************/
39	/**
40	* Maximum number of sectors to transfer in a READ/WRITE MULTIPLE request.
41	* Set to 1 to disable multi-sector read support. According to the ATA
42	* specification this must be a power of 2 and it must fit in an 8 bit
43	* value. Thus the only valid values are 1, 2, 4, 8, 16, 32, 64 and 128.
44	*/
45	#define ATA_MAX_MULT_SECTORS 128
46
47	/**
48	* Fastest PIO mode supported by the drive.
49	*/
50	#define ATA_PIO_MODE_MAX 4
51	/**
52	* Fastest MDMA mode supported by the drive.
53	*/
54	#define ATA_MDMA_MODE_MAX 2
55	/**
56	* Fastest UDMA mode supported by the drive.
57	*/
58	#define ATA_UDMA_MODE_MAX 6
59
60	/** ATAPI sense info size. */
61	#define ATAPI_SENSE_SIZE 64
62
63	/** The maximum number of release log entries per device. */
64	#define MAX_LOG_REL_ERRORS 1024
65
66	/* MediaEventStatus */
67	#define ATA_EVENT_STATUS_UNCHANGED 0 /*< medium event status not changed /
68	#define ATA_EVENT_STATUS_MEDIA_NEW 1 /*< new medium inserted /
69	#define ATA_EVENT_STATUS_MEDIA_REMOVED 2 /*< medium removed /
70	#define ATA_EVENT_STATUS_MEDIA_CHANGED 3 /*< medium was removed + new medium was inserted /
71	#define ATA_EVENT_STATUS_MEDIA_EJECT_REQUESTED 4 /*< medium eject requested (eject button pressed) /
72
73
74	/*******************************************************************************
75	* Structures and Typedefs *
76	*******************************************************************************/
77	typedef struct AHCIATADevState {
78	/** Flag indicating whether the current command uses LBA48 mode. */
79	bool fLBA48;
80	/** Flag indicating whether this drive implements the ATAPI command set. */
81	bool fATAPI;
82	/** Set if this interface has asserted the IRQ. */
83	bool fIrqPending;
84	/** Currently configured number of sectors in a multi-sector transfer. */
85	uint8_t cMultSectors;
86	/** PCHS disk geometry. */
87	PDMMEDIAGEOMETRY PCHSGeometry;
88	/** Total number of sectors on this disk. */
89	uint64_t cTotalSectors;
90	/** Number of sectors to transfer per IRQ. */
91	uint32_t cSectorsPerIRQ;
92
93	/** ATA/ATAPI register 1: feature (write-only). */
94	uint8_t uATARegFeature;
95	/** ATA/ATAPI register 1: feature, high order byte. */
96	uint8_t uATARegFeatureHOB;
97	/** ATA/ATAPI register 1: error (read-only). */
98	uint8_t uATARegError;
99	/** ATA/ATAPI register 2: sector count (read/write). */
100	uint8_t uATARegNSector;
101	/** ATA/ATAPI register 2: sector count, high order byte. */
102	uint8_t uATARegNSectorHOB;
103	/** ATA/ATAPI register 3: sector (read/write). */
104	uint8_t uATARegSector;
105	/** ATA/ATAPI register 3: sector, high order byte. */
106	uint8_t uATARegSectorHOB;
107	/** ATA/ATAPI register 4: cylinder low (read/write). */
108	uint8_t uATARegLCyl;
109	/** ATA/ATAPI register 4: cylinder low, high order byte. */
110	uint8_t uATARegLCylHOB;
111	/** ATA/ATAPI register 5: cylinder high (read/write). */
112	uint8_t uATARegHCyl;
113	/** ATA/ATAPI register 5: cylinder high, high order byte. */
114	uint8_t uATARegHCylHOB;
115	/** ATA/ATAPI register 6: select drive/head (read/write). */
116	uint8_t uATARegSelect;
117	/** ATA/ATAPI register 7: status (read-only). */
118	uint8_t uATARegStatus;
119	/** ATA/ATAPI register 7: command (write-only). */
120	uint8_t uATARegCommand;
121	/** ATA/ATAPI drive control register (write-only). */
122	uint8_t uATARegDevCtl;
123
124	/** Currently active transfer mode (MDMA/UDMA) and speed. */
125	uint8_t uATATransferMode;
126	/** Current transfer direction. */
127	uint8_t uTxDir;
128	/** Index of callback for begin transfer. */
129	uint8_t iBeginTransfer;
130	/** Index of callback for source/sink of data. */
131	uint8_t iSourceSink;
132	/** Flag indicating whether the current command transfers data in DMA mode. */
133	bool fDMA;
134	/** Set to indicate that ATAPI transfer semantics must be used. */
135	bool fATAPITransfer;
136
137	/** Total ATA/ATAPI transfer size, shared PIO/DMA. */
138	uint32_t cbTotalTransfer;
139	/** Elementary ATA/ATAPI transfer size, shared PIO/DMA. */
140	uint32_t cbElementaryTransfer;
141	/** Current read/write buffer position, shared PIO/DMA. */
142	uint32_t iIOBufferCur;
143	/** First element beyond end of valid buffer content, shared PIO/DMA. */
144	uint32_t iIOBufferEnd;
145
146	/** ATA/ATAPI current PIO read/write transfer position. Not shared with DMA for safety reasons. */
147	uint32_t iIOBufferPIODataStart;
148	/** ATA/ATAPI current PIO read/write transfer end. Not shared with DMA for safety reasons. */
149	uint32_t iIOBufferPIODataEnd;
150
151	/** ATAPI current LBA position. */
152	uint32_t iATAPILBA;
153	/** ATAPI current sector size. */
154	uint32_t cbATAPISector;
155	/** ATAPI current command. */
156	uint8_t aATAPICmd[ATAPI_PACKET_SIZE];
157	/** ATAPI sense data. */
158	uint8_t abATAPISense[ATAPI_SENSE_SIZE];
159	/** HACK: Countdown till we report a newly unmounted drive as mounted. */
160	uint8_t cNotifiedMediaChange;
161	/** The same for GET_EVENT_STATUS for mechanism */
162	volatile uint32_t MediaEventStatus;
163
164	/** The status LED state for this drive. */
165	R3PTRTYPE(PPDMLED) pLed;
166	#if HC_ARCH_BITS == 64
167	uint32_t uAlignment3;
168	#endif
169
170	/** Size of I/O buffer. */
171	uint32_t cbIOBuffer;
172	/** Pointer to the I/O buffer. */
173	R3PTRTYPE(uint8_t *) pbIOBufferR3;
174	/** Pointer to the I/O buffer. */
175	R0PTRTYPE(uint8_t *) pbIOBufferR0;
176	/** Pointer to the I/O buffer. */
177	RCPTRTYPE(uint8_t *) pbIOBufferRC;
178
179	RTRCPTR Aligmnent1; /*< Align the statistics at an 8-byte boundrary. /
180
181	/*
182	* No data that is part of the saved state after this point!!!!!
183	*/
184
185	/* Release statistics: number of ATA DMA commands. */
186	STAMCOUNTER StatATADMA;
187	/* Release statistics: number of ATA PIO commands. */
188	STAMCOUNTER StatATAPIO;
189	/* Release statistics: number of ATAPI PIO commands. */
190	STAMCOUNTER StatATAPIDMA;
191	/* Release statistics: number of ATAPI PIO commands. */
192	STAMCOUNTER StatATAPIPIO;
193	#ifdef VBOX_INSTRUMENT_DMA_WRITES
194	/* Release statistics: number of DMA sector writes and the time spent. */
195	STAMPROFILEADV StatInstrVDWrites;
196	#endif
197
198	/** Statistics: number of read operations and the time spent reading. */
199	STAMPROFILEADV StatReads;
200	/** Statistics: number of bytes read. */
201	R3PTRTYPE(PSTAMCOUNTER) pStatBytesRead;
202	#if HC_ARCH_BITS == 64
203	uint64_t uAlignment4;
204	#endif
205	/** Statistics: number of write operations and the time spent writing. */
206	STAMPROFILEADV StatWrites;
207	/** Statistics: number of bytes written. */
208	R3PTRTYPE(PSTAMCOUNTER) pStatBytesWritten;
209	#if HC_ARCH_BITS == 64
210	uint64_t uAlignment5;
211	#endif
212	/** Statistics: number of flush operations and the time spend flushing. */
213	STAMPROFILE StatFlushes;
214
215	/** Enable passing through commands directly to the ATAPI drive. */
216	bool fATAPIPassthrough;
217	/** Number of errors we've reported to the release log.
218	* This is to prevent flooding caused by something going horribly wrong.
219	* this value against MAX_LOG_REL_ERRORS in places likely to cause floods
220	* like the ones we currently seeing on the linux smoke tests (2006-11-10). */
221	uint32_t cErrors;
222	/** Timestamp of last started command. 0 if no command pending. */
223	uint64_t u64CmdTS;
224
225	/** Pointer to the attached driver's base interface. */
226	R3PTRTYPE(PPDMIBASE) pDrvBase;
227	/** Pointer to the attached driver's block interface. */
228	R3PTRTYPE(PPDMIBLOCK) pDrvBlock;
229	/** Pointer to the attached driver's block bios interface. */
230	R3PTRTYPE(PPDMIBLOCKBIOS) pDrvBlockBios;
231	/** Pointer to the attached driver's mount interface.
232	* This is NULL if the driver isn't a removable unit. */
233	R3PTRTYPE(PPDMIMOUNT) pDrvMount;
234	/** The base interface. */
235	PDMIBASE IBase;
236	/** The block port interface. */
237	PDMIBLOCKPORT IPort;
238	/** The mount notify interface. */
239	PDMIMOUNTNOTIFY IMountNotify;
240	/** The LUN #. */
241	RTUINT iLUN;
242	#if HC_ARCH_BITS == 64
243	RTUINT Alignment2; /*< Align pDevInsR3 correctly. /
244	#endif
245	/** Pointer to device instance. */
246	PPDMDEVINSR3 pDevInsR3;
247	/** Pointer to controller instance. */
248	R3PTRTYPE(struct AHCIATACONTROLLER *) pControllerR3;
249	/** Pointer to device instance. */
250	PPDMDEVINSR0 pDevInsR0;
251	/** Pointer to controller instance. */
252	R0PTRTYPE(struct AHCIATACONTROLLER *) pControllerR0;
253	/** Pointer to device instance. */
254	PPDMDEVINSRC pDevInsRC;
255	/** Pointer to controller instance. */
256	RCPTRTYPE(struct AHCIATACONTROLLER *) pControllerRC;
257	} AHCIATADevState;
258
259
260	typedef struct AHCIATATransferRequest
261	{
262	uint8_t iIf;
263	uint8_t iBeginTransfer;
264	uint8_t iSourceSink;
265	uint32_t cbTotalTransfer;
266	uint8_t uTxDir;
267	} AHCIATATransferRequest;
268
269
270	typedef struct AHCIATAAbortRequest
271	{
272	uint8_t iIf;
273	bool fResetDrive;
274	} AHCIATAAbortRequest;
275
276
277	typedef enum
278	{
279	/** Begin a new transfer. */
280	AHCIATA_AIO_NEW = 0,
281	/** Continue a DMA transfer. */
282	AHCIATA_AIO_DMA,
283	/** Continue a PIO transfer. */
284	AHCIATA_AIO_PIO,
285	/** Reset the drives on current controller, stop all transfer activity. */
286	AHCIATA_AIO_RESET_ASSERTED,
287	/** Reset the drives on current controller, resume operation. */
288	AHCIATA_AIO_RESET_CLEARED,
289	/** Abort the current transfer of a particular drive. */
290	AHCIATA_AIO_ABORT
291	} AHCIATAAIO;
292
293
294	typedef struct AHCIATARequest
295	{
296	AHCIATAAIO ReqType;
297	union
298	{
299	AHCIATATransferRequest t;
300	AHCIATAAbortRequest a;
301	} u;
302	} AHCIATARequest;
303
304
305	typedef struct AHCIATACONTROLLER
306	{
307	/** The base of the first I/O Port range. */
308	RTIOPORT IOPortBase1;
309	/** The base of the second I/O Port range. (0 if none) */
310	RTIOPORT IOPortBase2;
311	/** The assigned IRQ. */
312	RTUINT irq;
313	/** Access critical section */
314	PDMCRITSECT lock;
315
316	/** Selected drive. */
317	uint8_t iSelectedIf;
318	/** The interface on which to handle async I/O. */
319	uint8_t iAIOIf;
320	/** The state of the async I/O thread. */
321	uint8_t uAsyncIOState;
322	/** Flag indicating whether the next transfer is part of the current command. */
323	bool fChainedTransfer;
324	/** Set when the reset processing is currently active on this controller. */
325	bool fReset;
326	/** Flag whether the current transfer needs to be redone. */
327	bool fRedo;
328	/** Flag whether the redo suspend has been finished. */
329	bool fRedoIdle;
330	/** Flag whether the DMA operation to be redone is the final transfer. */
331	bool fRedoDMALastDesc;
332	/** The BusMaster DMA state. */
333	BMDMAState BmDma;
334	/** Pointer to first DMA descriptor. */
335	RTGCPHYS32 pFirstDMADesc;
336	/** Pointer to last DMA descriptor. */
337	RTGCPHYS32 pLastDMADesc;
338	/** Pointer to current DMA buffer (for redo operations). */
339	RTGCPHYS32 pRedoDMABuffer;
340	/** Size of current DMA buffer (for redo operations). */
341	uint32_t cbRedoDMABuffer;
342
343	/** The ATA/ATAPI interfaces of this controller. */
344	AHCIATADevState aIfs[2];
345
346	/** Pointer to device instance. */
347	PPDMDEVINSR3 pDevInsR3;
348	/** Pointer to device instance. */
349	PPDMDEVINSR0 pDevInsR0;
350	/** Pointer to device instance. */
351	PPDMDEVINSRC pDevInsRC;
352
353	/** Set when the destroying the device instance and the thread must exit. */
354	uint32_t volatile fShutdown;
355	/** The async I/O thread handle. NIL_RTTHREAD if no thread. */
356	RTTHREAD AsyncIOThread;
357	/** The event semaphore the thread is waiting on for requests. */
358	RTSEMEVENT AsyncIOSem;
359	/** The request queue for the AIO thread. One element is always unused. */
360	AHCIATARequest aAsyncIORequests[4];
361	/** The position at which to insert a new request for the AIO thread. */
362	uint8_t AsyncIOReqHead;
363	/** The position at which to get a new request for the AIO thread. */
364	uint8_t AsyncIOReqTail;
365	/** Whether to call RTThreadUserSignal and PDMDevHlpAsyncNotificationCompleted
366	* when idle. Before setting this, call RTThreadUserReset. */
367	bool volatile fSignalIdle;
368	uint8_t Alignment3[1]; /*< Explicit padding of the 1 byte gap. /
369	/** Magic delay before triggering interrupts in DMA mode. */
370	uint32_t DelayIRQMillies;
371	/** The mutex protecting the request queue. */
372	RTSEMMUTEX AsyncIORequestMutex;
373	/** The event semaphore the thread is waiting on during suspended I/O. */
374	RTSEMEVENT SuspendIOSem;
375	#if 0 /HC_ARCH_BITS == 32/
376	uint32_t Alignment0;
377	#endif
378
379	/* Statistics */
380	STAMCOUNTER StatAsyncOps;
381	uint64_t StatAsyncMinWait;
382	uint64_t StatAsyncMaxWait;
383	STAMCOUNTER StatAsyncTimeUS;
384	STAMPROFILEADV StatAsyncTime;
385	STAMPROFILE StatLockWait;
386	} AHCIATACONTROLLER, *PAHCIATACONTROLLER;
387
388	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
389
390	#define ATADEVSTATE_2_CONTROLLER(pIf) ( (pIf)->CTX_SUFF(pController) )
391	#define ATADEVSTATE_2_DEVINS(pIf) ( (pIf)->CTX_SUFF(pDevIns) )
392	#define CONTROLLER_2_DEVINS(pController) ( (pController)->CTX_SUFF(pDevIns) )
393	#define PDMIBASE_2_ATASTATE(pInterface) ( (AHCIATADevState *)((uintptr_t)(pInterface) - RT_OFFSETOF(AHCIATADevState, IBase)) )
394
395
396	/*******************************************************************************
397	* Internal Functions *
398	******************************************************************************/
399	RT_C_DECLS_BEGIN
400	int ataControllerIOPortWrite1(PAHCIATACONTROLLER pCtl, RTIOPORT Port, uint32_t u32, unsigned cb);
401	int ataControllerIOPortRead1(PAHCIATACONTROLLER pCtl, RTIOPORT Port, uint32_t *u32, unsigned cb);
402	int ataControllerIOPortWriteStr1(PAHCIATACONTROLLER pCtl, RTIOPORT Port, RTGCPTR *pGCPtrSrc, PRTGCUINTREG pcTransfer, unsigned cb);
403	int ataControllerIOPortReadStr1(PAHCIATACONTROLLER pCtl, RTIOPORT Port, RTGCPTR *pGCPtrDst, PRTGCUINTREG pcTransfer, unsigned cb);
404	int ataControllerIOPortWrite2(PAHCIATACONTROLLER pCtl, RTIOPORT Port, uint32_t u32, unsigned cb);
405	int ataControllerIOPortRead2(PAHCIATACONTROLLER pCtl, RTIOPORT Port, uint32_t *u32, unsigned cb);
406	int ataControllerBMDMAIOPortRead(PAHCIATACONTROLLER pCtl, RTIOPORT Port, uint32_t *pu32, unsigned cb);
407	int ataControllerBMDMAIOPortWrite(PAHCIATACONTROLLER pCtl, RTIOPORT Port, uint32_t u32, unsigned cb);
408	RT_C_DECLS_END
409
410	#ifdef IN_RING3
411	/**
412	* Initialize a controller state.
413	*
414	* @returns VBox status code.
415	* @param pDevIns Pointer to the device instance which creates a controller.
416	* @param pCtl Pointer to the unitialized ATA controller structure.
417	* @param pDrvBaseMaster Pointer to the base driver interface which acts as the master.
418	* @param pDrvBaseSlave Pointer to the base driver interface which acts as the slave.
419	* @param pcbSSMState Where to store the size of the device state for loading/saving.
420	* @param szName Name of the controller (Used to initialize the critical section).
421	*/
422	int ataControllerInit(PPDMDEVINS pDevIns, PAHCIATACONTROLLER pCtl,
423	unsigned iLUNMaster, PPDMIBASE pDrvBaseMaster,
424	unsigned iLUNSlave, PPDMIBASE pDrvBaseSlave,
425	uint32_t pcbSSMState, const char szName, PPDMLED pLed, PSTAMCOUNTER pStatBytesRead, PSTAMCOUNTER pStatBytesWritten);
426
427	/**
428	* Free all allocated resources for one controller instance.
429	*
430	* @returns VBox status code.
431	* @param pCtl The controller instance.
432	*/
433	int ataControllerDestroy(PAHCIATACONTROLLER pCtl);
434
435	/**
436	* Tests if the controller is idle, leaving the PDM notifications on if busy.
437	*
438	* @returns true if idle, false if idle.
439	* @param pCtl the controller instance.
440	*/
441	bool ataControllerIsIdle(PAHCIATACONTROLLER pCtl);
442
443	/**
444	* Reset a controller instance to an initial state.
445	*
446	* @returns VBox status code.
447	* @param pCtl Pointer to the controller.
448	*/
449	void ataControllerReset(PAHCIATACONTROLLER pCtl);
450
451	/**
452	* Resume operation of an controller.
453	*
454	* @returns nothing
455	* @param pCtl The controller instance.
456	*/
457
458	void ataControllerResume(PAHCIATACONTROLLER pCtl);
459
460	/**
461	* Relocate neccessary pointers.
462	*
463	* @returns nothing.
464	* @param pCtl The controller instance.
465	* @param offDelta The relocation delta relative to the old location.
466	*/
467	void ataControllerRelocate(PAHCIATACONTROLLER pCtl, RTGCINTPTR offDelta);
468
469	/**
470	* Execute state save operation.
471	*
472	* @returns VBox status code.
473	* @param pCtl The controller instance.
474	* @param pSSM SSM operation handle.
475	*/
476	int ataControllerSaveExec(PAHCIATACONTROLLER pCtl, PSSMHANDLE pSSM);
477
478	/**
479	* Excute state load operation.
480	*
481	* @returns VBox status code.
482	* @param pCtl The controller instance.
483	* @param pSSM SSM operation handle.
484	*/
485	int ataControllerLoadExec(PAHCIATACONTROLLER pCtl, PSSMHANDLE pSSM);
486
487	/**
488	* Attach command.
489	*
490	* This is called when we change block driver for the DVD drive.
491	*
492	* @returns VBox status code.
493	* @param pDevIns The device instance.
494	* @param iLUN The logical unit which is being detached.
495	*/
496	int ataControllerAttach(PAHCIATACONTROLLER pCtl, PPDMIBASE pDrvBase, bool fMaster);
497
498	/**
499	* Detach notification.
500	*
501	* The DVD drive has been unplugged.
502	*
503	* @param pDevIns The device instance.
504	* @param fMaster True if the master is detached
505	* false for the slave
506	*/
507	void ataControllerDetach(PAHCIATACONTROLLER pCtl, bool fMaster);
508
509	#endif /* IN_RING3 */
510
511	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
512	#endif /* !___Storage_ATAController_h */
513

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Devices/Storage/ATAController.h@ 33016

Download in other formats: