/* $Id: DrvVUSBRootHub.cpp 57442 2015-08-18 16:47:42Z vboxsync $ */ /** @file * Virtual USB - Root Hub Driver. */ /* * Copyright (C) 2005-2015 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_dev_vusb VUSB - Virtual USB * * @todo read thru this and correct typos. Merge with old docs. * * * The Virtual USB component glues USB devices and host controllers together. * The VUSB takes the form of a PDM driver which is attached to the HCI. USB * devices are created by, attached to, and managed by the VUSB roothub. The * VUSB also exposes an interface which is used by Main to attach and detach * proxied USB devices. * * * @section sec_dev_vusb_urb The Life of an URB * * The URB is created when the HCI calls the roothub (VUSB) method pfnNewUrb. * VUSB has a pool of URBs, if no free URBs are available a new one is * allocated. The returned URB starts life in the ALLOCATED state and all * fields are initialized with sensible defaults. * * The HCI then copies any request data into the URB if it's an host2dev * transfer. It then submits the URB by calling the pfnSubmitUrb roothub * method. * * pfnSubmitUrb will start by checking if it knows the device address, and if * it doesn't the URB is completed with a device-not-ready error. When the * device address is known to it, action is taken based on the kind of * transfer it is. There are four kinds of transfers: 1. control, 2. bulk, * 3. interrupt, and 4. isochronous. In either case something eventually ends * up being submitted to the device. * * * If an URB fails submitting, may or may not be completed. This depends on * heuristics in some cases and on the kind of failure in others. If * pfnSubmitUrb returns a failure, the HCI should retry submitting it at a * later time. If pfnSubmitUrb returns success the URB is submitted, and it * can even been completed. * * The URB is in the IN_FLIGHT state from the time it's successfully submitted * and till it's reaped or cancelled. * * When an URB transfer or in some case submit failure occurs, the pfnXferError * callback of the HCI is consulted about what to do. If pfnXferError indicates * that the URB should be retried, pfnSubmitUrb will fail. If it indicates that * it should fail, the URB will be completed. * * Completing an URB means that the URB status is set and the HCI * pfnXferCompletion callback is invoked with the URB. The HCI is the supposed * to report the transfer status to the guest OS. After completion the URB * is freed and returned to the pool, unless it was cancelled. If it was * cancelled it will have to await reaping before it's actually freed. * * * @subsection subsec_dev_vusb_urb_ctrl Control * * The control transfer is the most complex one, from VUSB's point of view, * with its three stages and being bi-directional. A control transfer starts * with a SETUP packet containing the request description and two basic * parameters. It is followed by zero or more DATA packets which either picks * up incoming data (dev2host) or supplies the request data (host2dev). This * can then be followed by a STATUS packet which gets the status of the whole * transfer. * * What makes the control transfer complicated is that for a host2dev request * the URB is assembled from the SETUP and DATA stage, and for a dev2host * request the returned data must be kept around for the DATA stage. For both * transfer directions the status of the transfer has to be kept around for * the STATUS stage. * * To complicate matters further, VUSB must intercept and in some cases emulate * some of the standard requests in order to keep the virtual device state * correct and provide the correct virtualization of a device. * * @subsection subsec_dev_vusb_urb_bulk Bulk and Interrupt * * The bulk and interrupt transfer types are relativly simple compared to the * control transfer. VUSB is not inspecting the request content or anything, * but passes it down the device. * * @subsection subsec_dev_vusb_urb_bulk Isochronous * * This kind of transfers hasn't yet been implemented. * */ /** @page pg_dev_vusb_old VUSB - Virtual USB Core * * The virtual USB core is controlled by the roothub and the underlying HCI * emulator, it is responsible for device addressing, managing configurations, * interfaces and endpoints, assembling and splitting multi-part control * messages and in general acts as a middle layer between the USB device * emulation code and USB HCI emulation code. * * All USB devices are represented by a struct vusb_dev. This structure * contains things like the device state, device address, all the configuration * descriptors, the currently selected configuration and a mapping between * endpoint addresses and endpoint descriptors. * * Each vusb_dev also has a pointer to a vusb_dev_ops structure which serves as * the virtual method table and includes a virtual constructor and destructor. * After a vusb_dev is created it may be attached to a hub device such as a * roothub (using vusbHubAttach). Although each hub structure has cPorts * and cDevices fields, it is the responsibility of the hub device to allocate * a free port for the new device. * * Devices can chose one of two interfaces for dealing with requests, the * synchronous interface or the asynchronous interface. The synchronous * interface is much simpler and ought to be used for devices which are * unlikely to sleep for long periods in order to serve requests. The * asynchronous interface on the other hand is more difficult to use but is * useful for the USB proxy or if one were to write a mass storage device * emulator. Currently the synchronous interface only supports control and bulk * endpoints and is no longer used by anything. * * In order to use the asynchronous interface, the queue_urb, cancel_urb and * pfnUrbReap fields must be set in the devices vusb_dev_ops structure. The * queue_urb method is used to submit a request to a device without blocking, * it returns 1 if successful and 0 on any kind of failure. A successfully * queued URB is completed when the pfnUrbReap method returns it. Each function * address is reference counted so that pfnUrbReap will only be called if there * are URBs outstanding. For a roothub to reap an URB from any one of it's * devices, the vusbRhReapAsyncUrbs() function is used. * * There are four types of messages an URB may contain: * -# Control - represents a single packet of a multi-packet control * transfer, these are only really used by the host controller to * submit the parts to the usb core. * -# Message - the usb core assembles multiple control transfers in * to single message transfers. In this case the data buffer * contains the setup packet in little endian followed by the full * buffer. In the case of an host-to-device control message, the * message packet is created when the STATUS transfer is seen. In * the case of device-to-host messages, the message packet is * created after the SETUP transfer is seen. Also, certain control * requests never go the real device and get handled synchronously. * -# Bulk - Currently the only endpoint type that does error checking * and endpoint halting. * -# Interrupt - The only non-periodic type supported. * * Hubs are special cases of devices, they have a number of downstream ports * that other devices can be attached to and removed from. * * After a device has been attached (vusbHubAttach): * -# The hub attach method is called, which sends a hub status * change message to the OS. * -# The OS resets the device, and it appears on the default * address with it's config 0 selected (a pseudo-config that * contains only 1 interface with 1 endpoint - the default * message pipe). * -# The OS assigns the device a new address and selects an * appropriate config. * -# The device is ready. * * After a device has been detached (vusbDevDetach): * -# All pending URBs are cancelled. * -# The devices address is unassigned. * -# The hub detach method is called which signals the OS * of the status change. * -# The OS unlinks the ED's for that device. * * A device can also request detachment from within its own methods by * calling vusbDevUnplugged(). * * Roothubs are responsible for driving the whole system, they are special * cases of hubs and as such implement attach and detach methods, each one * is described by a struct vusb_roothub. Once a roothub has submitted an * URB to the USB core, a number of callbacks to the roothub are required * for when the URB completes, since the roothub typically wants to inform * the OS when transfers are completed. * * There are four callbacks to be concerned with: * -# prepare - This is called after the URB is successfully queued. * -# completion - This is called after the URB completed. * -# error - This is called if the URB errored, some systems have * automatic resubmission of failed requests, so this callback * should keep track of the error count and return 1 if the count * is above the number of allowed resubmissions. * -# halt_ep - This is called after errors on bulk pipes in order * to halt the pipe. * */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #define LOG_GROUP LOG_GROUP_DRV_VUSB #include #include #include #include #include #include #include #include #include #include #include #include #include "VUSBInternal.h" #include "VBoxDD.h" /** * Attaches a device to a specific hub. * * This function is called by the vusb_add_device() and vusbRhAttachDevice(). * * @returns VBox status code. * @param pHub The hub to attach it to. * @param pDev The device to attach. * @thread EMT */ static int vusbHubAttach(PVUSBHUB pHub, PVUSBDEV pDev) { LogFlow(("vusbHubAttach: pHub=%p[%s] pDev=%p[%s]\n", pHub, pHub->pszName, pDev, pDev->pUsbIns->pszName)); AssertMsg(pDev->enmState == VUSB_DEVICE_STATE_DETACHED, ("enmState=%d\n", pDev->enmState)); pDev->pHub = pHub; pDev->enmState = VUSB_DEVICE_STATE_ATTACHED; /* noone else ever messes with the default pipe while we are attached */ vusbDevMapEndpoint(pDev, &g_Endpoint0); vusbDevDoSelectConfig(pDev, &g_Config0); int rc = pHub->pOps->pfnAttach(pHub, pDev); if (RT_FAILURE(rc)) { pDev->pHub = NULL; pDev->enmState = VUSB_DEVICE_STATE_DETACHED; } return rc; } /* -=-=-=-=-=- PDMUSBHUBREG methods -=-=-=-=-=- */ /** @copydoc PDMUSBHUBREG::pfnAttachDevice */ static DECLCALLBACK(int) vusbPDMHubAttachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, const char *pszCaptureFilename, uint32_t *piPort) { PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); /* * Allocate a new VUSB device and initialize it. */ PVUSBDEV pDev = (PVUSBDEV)RTMemAllocZ(sizeof(*pDev)); AssertReturn(pDev, VERR_NO_MEMORY); int rc = vusbDevInit(pDev, pUsbIns, pszCaptureFilename); if (RT_SUCCESS(rc)) { pUsbIns->pvVUsbDev2 = pDev; rc = vusbHubAttach(&pThis->Hub, pDev); if (RT_SUCCESS(rc)) { *piPort = UINT32_MAX; ///@todo implement piPort return rc; } RTMemFree(pDev->paIfStates); pUsbIns->pvVUsbDev2 = NULL; } RTMemFree(pDev); return rc; } /** @copydoc PDMUSBHUBREG::pfnDetachDevice */ static DECLCALLBACK(int) vusbPDMHubDetachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, uint32_t iPort) { PVUSBDEV pDev = (PVUSBDEV)pUsbIns->pvVUsbDev2; Assert(pDev); vusbDevDestroy(pDev); RTMemFree(pDev); pUsbIns->pvVUsbDev2 = NULL; return VINF_SUCCESS; } /** * The hub registration structure. */ static const PDMUSBHUBREG g_vusbHubReg = { PDM_USBHUBREG_VERSION, vusbPDMHubAttachDevice, vusbPDMHubDetachDevice, PDM_USBHUBREG_VERSION }; /* -=-=-=-=-=- VUSBIROOTHUBCONNECTOR methods -=-=-=-=-=- */ /** * Finds an device attached to a roothub by it's address. * * @returns Pointer to the device. * @returns NULL if not found. * @param pRh Pointer to the root hub. * @param Address The device address. */ static PVUSBDEV vusbRhFindDevByAddress(PVUSBROOTHUB pRh, uint8_t Address) { unsigned iHash = vusbHashAddress(Address); for (PVUSBDEV pDev = pRh->apAddrHash[iHash]; pDev; pDev = pDev->pNextHash) if (pDev->u8Address == Address) return pDev; return NULL; } /** * Callback for freeing an URB. * @param pUrb The URB to free. */ static DECLCALLBACK(void) vusbRhFreeUrb(PVUSBURB pUrb) { /* * Assert sanity. */ vusbUrbAssert(pUrb); PVUSBROOTHUB pRh = (PVUSBROOTHUB)pUrb->VUsb.pvFreeCtx; Assert(pRh); /* * Free the URB description (logging builds only). */ if (pUrb->pszDesc) { RTStrFree(pUrb->pszDesc); pUrb->pszDesc = NULL; } /* * Put it into the LIFO of free URBs. * (No ppPrev is needed here.) */ RTCritSectEnter(&pRh->CritSectFreeUrbs); pUrb->enmState = VUSBURBSTATE_FREE; pUrb->VUsb.ppPrev = NULL; pUrb->VUsb.pNext = pRh->pFreeUrbs; pRh->pFreeUrbs = pUrb; Assert(pRh->pFreeUrbs->enmState == VUSBURBSTATE_FREE); RTCritSectLeave(&pRh->CritSectFreeUrbs); } /** * Worker routine for vusbRhConnNewUrb() and vusbDevNewIsocUrb(). */ PVUSBURB vusbRhNewUrb(PVUSBROOTHUB pRh, uint8_t DstAddress, uint32_t cbData, uint32_t cTds) { /* * Reuse or allocate a new URB. */ /** @todo try find a best fit, MSD which submits rather big URBs intermixed with small control * messages ends up with a 2+ of these big URBs when a single one is sufficient. */ /** @todo The allocations should be done by the device, at least as an option, since the devices * frequently wish to associate their own stuff with the in-flight URB or need special buffering * (isochronous on Darwin for instance). */ RTCritSectEnter(&pRh->CritSectFreeUrbs); PVUSBURB pUrbPrev = NULL; PVUSBURB pUrb = pRh->pFreeUrbs; while (pUrb) { if ( pUrb->VUsb.cbDataAllocated >= cbData && pUrb->VUsb.cTdsAllocated >= cTds) break; pUrbPrev = pUrb; pUrb = pUrb->VUsb.pNext; } if (pUrb) { if (pUrbPrev) pUrbPrev->VUsb.pNext = pUrb->VUsb.pNext; else pRh->pFreeUrbs = pUrb->VUsb.pNext; Assert(pUrb->u32Magic == VUSBURB_MAGIC); Assert(pUrb->VUsb.pvFreeCtx == pRh); Assert(pUrb->VUsb.pfnFree == vusbRhFreeUrb); Assert(pUrb->enmState == VUSBURBSTATE_FREE); Assert(!pUrb->VUsb.pNext || pUrb->VUsb.pNext->enmState == VUSBURBSTATE_FREE); } else { /* allocate a new one. */ uint32_t cbDataAllocated = cbData <= _4K ? RT_ALIGN_32(cbData, _1K) : cbData <= _32K ? RT_ALIGN_32(cbData, _4K) : RT_ALIGN_32(cbData, 16*_1K); uint32_t cTdsAllocated = RT_ALIGN_32(cTds, 16); pUrb = (PVUSBURB)RTMemAlloc( RT_OFFSETOF(VUSBURB, abData[cbDataAllocated + 16]) + sizeof(pUrb->Hci.paTds[0]) * cTdsAllocated); if (RT_UNLIKELY(!pUrb)) { RTCritSectLeave(&pRh->CritSectFreeUrbs); AssertLogRelFailedReturn(NULL); } pRh->cUrbsInPool++; pUrb->u32Magic = VUSBURB_MAGIC; pUrb->VUsb.pvFreeCtx = pRh; pUrb->VUsb.pfnFree = vusbRhFreeUrb; pUrb->VUsb.cbDataAllocated = cbDataAllocated; pUrb->VUsb.cTdsAllocated = cTdsAllocated; pUrb->Hci.paTds = (VUSBURB::VUSBURBHCI::VUSBURBHCITD *)(&pUrb->abData[cbDataAllocated + 16]); } RTCritSectLeave(&pRh->CritSectFreeUrbs); /* * (Re)init the URB */ pUrb->enmState = VUSBURBSTATE_ALLOCATED; pUrb->fCompleting = false; pUrb->pszDesc = NULL; pUrb->VUsb.pNext = NULL; pUrb->VUsb.ppPrev = NULL; pUrb->VUsb.pCtrlUrb = NULL; pUrb->VUsb.u64SubmitTS = 0; pUrb->VUsb.pDev = vusbRhFindDevByAddress(pRh, DstAddress); pUrb->Hci.EdAddr = ~0; pUrb->Hci.cTds = cTds; pUrb->Hci.pNext = NULL; pUrb->Hci.u32FrameNo = 0; pUrb->Hci.fUnlinked = false; pUrb->Dev.pvPrivate = NULL; pUrb->Dev.pNext = NULL; pUrb->pUsbIns = pUrb->VUsb.pDev ? pUrb->VUsb.pDev->pUsbIns : NULL; pUrb->DstAddress = DstAddress; pUrb->EndPt = ~0; pUrb->enmType = VUSBXFERTYPE_INVALID; pUrb->enmDir = VUSBDIRECTION_INVALID; pUrb->fShortNotOk = false; pUrb->enmStatus = VUSBSTATUS_INVALID; pUrb->cbData = cbData; return pUrb; } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnNewUrb */ static DECLCALLBACK(PVUSBURB) vusbRhConnNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, uint32_t cbData, uint32_t cTds) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); return vusbRhNewUrb(pRh, DstAddress, cbData, cTds); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnSubmitUrb */ static DECLCALLBACK(int) vusbRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, PPDMLED pLed) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); STAM_PROFILE_START(&pRh->StatSubmitUrb, a); #ifdef VBOX_WITH_STATISTICS /* * Total and per-type submit statistics. */ Assert(pUrb->enmType >= 0 && pUrb->enmType < (int)RT_ELEMENTS(pRh->aTypes)); STAM_COUNTER_INC(&pRh->Total.StatUrbsSubmitted); STAM_COUNTER_INC(&pRh->aTypes[pUrb->enmType].StatUrbsSubmitted); STAM_COUNTER_ADD(&pRh->Total.StatReqBytes, pUrb->cbData); STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqBytes, pUrb->cbData); if (pUrb->enmDir == VUSBDIRECTION_IN) { STAM_COUNTER_ADD(&pRh->Total.StatReqReadBytes, pUrb->cbData); STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqReadBytes, pUrb->cbData); } else { STAM_COUNTER_ADD(&pRh->Total.StatReqWriteBytes, pUrb->cbData); STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqWriteBytes, pUrb->cbData); } if (pUrb->enmType == VUSBXFERTYPE_ISOC) { STAM_COUNTER_ADD(&pRh->StatIsocReqPkts, pUrb->cIsocPkts); if (pUrb->enmDir == VUSBDIRECTION_IN) STAM_COUNTER_ADD(&pRh->StatIsocReqReadPkts, pUrb->cIsocPkts); else STAM_COUNTER_ADD(&pRh->StatIsocReqWritePkts, pUrb->cIsocPkts); } #endif /* If there is a sniffer on the roothub record the URB there. */ if (pRh->hSniffer != VUSBSNIFFER_NIL) { int rc = VUSBSnifferRecordEvent(pRh->hSniffer, pUrb, VUSBSNIFFEREVENT_SUBMIT); if (RT_FAILURE(rc)) LogRel(("VUSB: Capturing URB submit event on the root hub failed with %Rrc\n", rc)); } /* * The device was resolved when we allocated the URB. * Submit it to the device if we found it, if not fail with device-not-ready. */ int rc; if ( pUrb->VUsb.pDev && pUrb->pUsbIns) { switch (pUrb->enmDir) { case VUSBDIRECTION_IN: pLed->Asserted.s.fReading = pLed->Actual.s.fReading = 1; rc = vusbUrbSubmit(pUrb); pLed->Actual.s.fReading = 0; break; case VUSBDIRECTION_OUT: pLed->Asserted.s.fWriting = pLed->Actual.s.fWriting = 1; rc = vusbUrbSubmit(pUrb); pLed->Actual.s.fWriting = 0; break; default: rc = vusbUrbSubmit(pUrb); break; } if (RT_FAILURE(rc)) { LogFlow(("vusbRhSubmitUrb: freeing pUrb=%p\n", pUrb)); pUrb->VUsb.pfnFree(pUrb); } } else { pUrb->VUsb.pDev = &pRh->Hub.Dev; Log(("vusb: pRh=%p: SUBMIT: Address %i not found!!!\n", pRh, pUrb->DstAddress)); pUrb->enmState = VUSBURBSTATE_REAPED; pUrb->enmStatus = VUSBSTATUS_DNR; vusbUrbCompletionRh(pUrb); rc = VINF_SUCCESS; } STAM_PROFILE_STOP(&pRh->StatSubmitUrb, a); return rc; } static DECLCALLBACK(int) vusbRhReapAsyncUrbsWorker(PVUSBDEV pDev, RTMSINTERVAL cMillies) { if (!cMillies) vusbUrbDoReapAsync(pDev->pAsyncUrbHead, 0); else { uint64_t u64Start = RTTimeMilliTS(); do { vusbUrbDoReapAsync(pDev->pAsyncUrbHead, RT_MIN(cMillies >> 8, 10)); } while ( pDev->pAsyncUrbHead && RTTimeMilliTS() - u64Start < cMillies); } return VINF_SUCCESS; } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnReapAsyncUrbs */ static DECLCALLBACK(void) vusbRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, RTMSINTERVAL cMillies) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); PVUSBDEV pDev = (PVUSBDEV)pDevice; if (!pDev->pAsyncUrbHead) return; STAM_PROFILE_START(&pRh->StatReapAsyncUrbs, a); int rc = vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhReapAsyncUrbsWorker, 2, pDev, cMillies); AssertRC(rc); STAM_PROFILE_STOP(&pRh->StatReapAsyncUrbs, a); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnCancelUrbsEp */ static DECLCALLBACK(int) vusbRhCancelUrbsEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); AssertReturn(pRh, VERR_INVALID_PARAMETER); AssertReturn(pUrb, VERR_INVALID_PARAMETER); //@todo: This method of URB canceling may not work on non-Linux hosts. /* * Cancel and reap the URB(s) on an endpoint. */ LogFlow(("vusbRhCancelUrbsEp: pRh=%p pUrb=%p\n", pRh, pUrb)); vusbUrbCancelAsync(pUrb, CANCELMODE_UNDO); /* The reaper thread will take care of completing the URB. */ return VINF_SUCCESS; } /** * Worker doing the actual cancelling of all outstanding URBs on the device I/O thread. * * @returns VBox status code. * @param pDev USB device instance data. */ static DECLCALLBACK(int) vusbRhCancelAllUrbsWorker(PVUSBDEV pDev) { /* * Cancel the URBS. * * Not using th CritAsyncUrbs critical section here is safe * as the I/O thread is the only thread accessing this struture at the * moment. */ PVUSBURB pUrb = pDev->pAsyncUrbHead; while (pUrb) { PVUSBURB pNext = pUrb->VUsb.pNext; /* Call the worker directly. */ vusbUrbCancelWorker(pUrb, CANCELMODE_FAIL); pUrb = pNext; } return VINF_SUCCESS; } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnCancelAllUrbs */ static DECLCALLBACK(void) vusbRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); RTCritSectEnter(&pRh->CritSectDevices); PVUSBDEV pDev = pRh->pDevices; while (pDev) { vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhCancelAllUrbsWorker, 1, pDev); pDev = pDev->pNext; } RTCritSectLeave(&pRh->CritSectDevices); } /** * Worker doing the actual cancelling of all outstanding per-EP URBs on the * device I/O thread. * * @returns VBox status code. * @param pDev USB device instance data. * @param EndPt Endpoint number. * @param enmDir Endpoint direction. */ static DECLCALLBACK(int) vusbRhAbortEpWorker(PVUSBDEV pDev, int EndPt, VUSBDIRECTION enmDir) { /* * Iterate the URBs, find ones corresponding to given EP, and cancel them. */ PVUSBURB pUrb = pDev->pAsyncUrbHead; while (pUrb) { PVUSBURB pNext = pUrb->VUsb.pNext; Assert(pUrb->VUsb.pDev == pDev); if (pUrb->EndPt == EndPt && pUrb->enmDir == enmDir) { LogFlow(("%s: vusbRhAbortEpWorker: CANCELING URB\n", pUrb->pszDesc)); int rc = vusbUrbCancelWorker(pUrb, CANCELMODE_UNDO); AssertRC(rc); } pUrb = pNext; } return VINF_SUCCESS; } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnAbortEp */ static DECLCALLBACK(int) vusbRhAbortEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, int EndPt, VUSBDIRECTION enmDir) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); if (&pRh->Hub != ((PVUSBDEV)pDevice)->pHub) AssertFailedReturn(VERR_INVALID_PARAMETER); RTCritSectEnter(&pRh->CritSectDevices); PVUSBDEV pDev = (PVUSBDEV)pDevice; vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhAbortEpWorker, 3, pDev, EndPt, enmDir); RTCritSectLeave(&pRh->CritSectDevices); /* The reaper thread will take care of completing the URB. */ return VINF_SUCCESS; } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnAttachDevice */ static DECLCALLBACK(int) vusbRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); return vusbHubAttach(&pRh->Hub, (PVUSBDEV)pDevice); } /** @copydoc VUSBIROOTHUBCONNECTOR::pfnDetachDevice */ static DECLCALLBACK(int) vusbRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice) { PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); if (&pRh->Hub != ((PVUSBDEV)pDevice)->pHub) AssertFailedReturn(VERR_INVALID_PARAMETER); return vusbDevDetach((PVUSBDEV)pDevice); } /* -=-=-=-=-=- VUSB Device methods (for the root hub) -=-=-=-=-=- */ /** * @copydoc VUSBIDEVICE::pfnReset */ static DECLCALLBACK(int) vusbRhDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux, PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM) { PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice); Assert(!pfnDone); return pRh->pIRhPort->pfnReset(pRh->pIRhPort, fResetOnLinux); /** @todo change rc from bool to vbox status everywhere! */ } /** * @copydoc VUSBIDEVICE::pfnPowerOn */ static DECLCALLBACK(int) vusbRhDevPowerOn(PVUSBIDEVICE pInterface) { PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice); LogFlow(("vusbRhDevPowerOn: pRh=%p\n", pRh)); Assert( pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_DETACHED && pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_RESET); if (pRh->Hub.Dev.enmState == VUSB_DEVICE_STATE_ATTACHED) pRh->Hub.Dev.enmState = VUSB_DEVICE_STATE_POWERED; return VINF_SUCCESS; } /** * @copydoc VUSBIDEVICE::pfnPowerOff */ static DECLCALLBACK(int) vusbRhDevPowerOff(PVUSBIDEVICE pInterface) { PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice); LogFlow(("vusbRhDevPowerOff: pRh=%p\n", pRh)); Assert( pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_DETACHED && pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_RESET); /* * Cancel all URBs and reap them. */ VUSBIRhCancelAllUrbs(&pRh->IRhConnector); RTCritSectEnter(&pRh->CritSectDevices); PVUSBDEV pDev = pRh->pDevices; while (pDev) { VUSBIRhReapAsyncUrbs(&pRh->IRhConnector, (PVUSBIDEVICE)pDev, 0); pDev = pDev->pNext; } RTCritSectLeave(&pRh->CritSectDevices); pRh->Hub.Dev.enmState = VUSB_DEVICE_STATE_ATTACHED; return VINF_SUCCESS; } /** * @copydoc VUSBIDEVICE::pfnGetState */ static DECLCALLBACK(VUSBDEVICESTATE) vusbRhDevGetState(PVUSBIDEVICE pInterface) { PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice); return pRh->Hub.Dev.enmState; } /* -=-=-=-=-=- VUSB Hub methods -=-=-=-=-=- */ /** * Attach the device to the hub. * Port assignments and all such stuff is up to this routine. * * @returns VBox status code. * @param pHub Pointer to the hub. * @param pDev Pointer to the device. */ static int vusbRhHubOpAttach(PVUSBHUB pHub, PVUSBDEV pDev) { PVUSBROOTHUB pRh = (PVUSBROOTHUB)pHub; /* * Assign a port. */ int iPort = ASMBitFirstSet(&pRh->Bitmap, sizeof(pRh->Bitmap) * 8); if (iPort < 0) { LogRel(("VUSB: No ports available!\n")); return VERR_VUSB_NO_PORTS; } ASMBitClear(&pRh->Bitmap, iPort); pHub->cDevices++; pDev->i16Port = iPort; /* * Call the HCI attach routine and let it have its say before the device is * linked into the device list of this hub. */ int rc = pRh->pIRhPort->pfnAttach(pRh->pIRhPort, &pDev->IDevice, iPort); if (RT_SUCCESS(rc)) { RTCritSectEnter(&pRh->CritSectDevices); pDev->pNext = pRh->pDevices; pRh->pDevices = pDev; RTCritSectLeave(&pRh->CritSectDevices); LogRel(("VUSB: Attached '%s' to port %d\n", pDev->pUsbIns->pszName, iPort)); } else { ASMBitSet(&pRh->Bitmap, iPort); pHub->cDevices--; pDev->i16Port = -1; LogRel(("VUSB: Failed to attach '%s' to port %d, rc=%Rrc\n", pDev->pUsbIns->pszName, iPort, rc)); } return rc; } /** * Detach the device from the hub. * * @returns VBox status code. * @param pHub Pointer to the hub. * @param pDev Pointer to the device. */ static void vusbRhHubOpDetach(PVUSBHUB pHub, PVUSBDEV pDev) { PVUSBROOTHUB pRh = (PVUSBROOTHUB)pHub; Assert(pDev->i16Port != -1); /* * Check that it's attached and unlink it from the linked list. */ RTCritSectEnter(&pRh->CritSectDevices); if (pRh->pDevices != pDev) { PVUSBDEV pPrev = pRh->pDevices; while (pPrev && pPrev->pNext != pDev) pPrev = pPrev->pNext; Assert(pPrev); pPrev->pNext = pDev->pNext; } else pRh->pDevices = pDev->pNext; pDev->pNext = NULL; RTCritSectLeave(&pRh->CritSectDevices); /* * Detach the device and mark the port as available. */ unsigned uPort = pDev->i16Port; pRh->pIRhPort->pfnDetach(pRh->pIRhPort, &pDev->IDevice, uPort); LogRel(("VUSB: Detached '%s' from port %u\n", pDev->pUsbIns->pszName, uPort)); ASMBitSet(&pRh->Bitmap, uPort); pHub->cDevices--; } /** * The Hub methods implemented by the root hub. */ static const VUSBHUBOPS s_VUsbRhHubOps = { vusbRhHubOpAttach, vusbRhHubOpDetach }; /* -=-=-=-=-=- PDM Base interface methods -=-=-=-=-=- */ /** * @interface_method_impl{PDMIBASE,pfnQueryInterface} */ static DECLCALLBACK(void *) vusbRhQueryInterface(PPDMIBASE pInterface, const char *pszIID) { PPDMDRVINS pDrvIns = PDMIBASE_2_PDMDRV(pInterface); PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pDrvIns->IBase); PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIROOTHUBCONNECTOR, &pRh->IRhConnector); PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIDEVICE, &pRh->Hub.Dev.IDevice); return NULL; } /* -=-=-=-=-=- PDM Driver methods -=-=-=-=-=- */ /** * Destruct a driver instance. * * Most VM resources are freed by the VM. This callback is provided so that any non-VM * resources can be freed correctly. * * @param pDrvIns The driver instance data. */ static DECLCALLBACK(void) vusbRhDestruct(PPDMDRVINS pDrvIns) { PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PDMDRV_CHECK_VERSIONS_RETURN_VOID(pDrvIns); /* * Free all URBs. */ while (pRh->pFreeUrbs) { PVUSBURB pUrb = pRh->pFreeUrbs; pRh->pFreeUrbs = pUrb->VUsb.pNext; pUrb->u32Magic = 0; pUrb->enmState = VUSBURBSTATE_INVALID; pUrb->VUsb.pNext = NULL; RTMemFree(pUrb); } if (pRh->Hub.pszName) { RTStrFree(pRh->Hub.pszName); pRh->Hub.pszName = NULL; } if (pRh->hSniffer != VUSBSNIFFER_NIL) VUSBSnifferDestroy(pRh->hSniffer); RTCritSectDelete(&pRh->CritSectDevices); RTCritSectDelete(&pRh->CritSectFreeUrbs); } /** * Construct a root hub driver instance. * * @copydoc FNPDMDRVCONSTRUCT */ static DECLCALLBACK(int) vusbRhConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags) { LogFlow(("vusbRhConstruct: Instance %d\n", pDrvIns->iInstance)); PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB); PDMDRV_CHECK_VERSIONS_RETURN(pDrvIns); /* * Validate configuration. */ if (!CFGMR3AreValuesValid(pCfg, "CaptureFilename\0")) return VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES; /* * Check that there are no drivers below us. */ AssertMsgReturn(PDMDrvHlpNoAttach(pDrvIns) == VERR_PDM_NO_ATTACHED_DRIVER, ("Configuration error: Not possible to attach anything to this driver!\n"), VERR_PDM_DRVINS_NO_ATTACH); /* * Initialize the critical sections. */ int rc = RTCritSectInit(&pThis->CritSectDevices); if (RT_FAILURE(rc)) return rc; rc = RTCritSectInit(&pThis->CritSectFreeUrbs); if (RT_FAILURE(rc)) return rc; char *pszCaptureFilename = NULL; rc = CFGMR3QueryStringAlloc(pCfg, "CaptureFilename", &pszCaptureFilename); if ( RT_FAILURE(rc) && rc != VERR_CFGM_VALUE_NOT_FOUND) return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS, N_("Configuration error: Failed to query value of \"CaptureFilename\"")); /* * Initialize the data members. */ pDrvIns->IBase.pfnQueryInterface = vusbRhQueryInterface; /* the usb device */ pThis->Hub.Dev.enmState = VUSB_DEVICE_STATE_ATTACHED; pThis->Hub.Dev.u8Address = VUSB_INVALID_ADDRESS; pThis->Hub.Dev.u8NewAddress = VUSB_INVALID_ADDRESS; pThis->Hub.Dev.i16Port = -1; pThis->Hub.Dev.IDevice.pfnReset = vusbRhDevReset; pThis->Hub.Dev.IDevice.pfnPowerOn = vusbRhDevPowerOn; pThis->Hub.Dev.IDevice.pfnPowerOff = vusbRhDevPowerOff; pThis->Hub.Dev.IDevice.pfnGetState = vusbRhDevGetState; /* the hub */ pThis->Hub.pOps = &s_VUsbRhHubOps; pThis->Hub.pRootHub = pThis; //pThis->hub.cPorts - later pThis->Hub.cDevices = 0; pThis->Hub.Dev.pHub = &pThis->Hub; RTStrAPrintf(&pThis->Hub.pszName, "RootHub#%d", pDrvIns->iInstance); /* misc */ pThis->pDrvIns = pDrvIns; /* the connector */ pThis->IRhConnector.pfnNewUrb = vusbRhConnNewUrb; pThis->IRhConnector.pfnSubmitUrb = vusbRhSubmitUrb; pThis->IRhConnector.pfnReapAsyncUrbs= vusbRhReapAsyncUrbs; pThis->IRhConnector.pfnCancelUrbsEp = vusbRhCancelUrbsEp; pThis->IRhConnector.pfnCancelAllUrbs= vusbRhCancelAllUrbs; pThis->IRhConnector.pfnAbortEp = vusbRhAbortEp; pThis->IRhConnector.pfnAttachDevice = vusbRhAttachDevice; pThis->IRhConnector.pfnDetachDevice = vusbRhDetachDevice; pThis->hSniffer = VUSBSNIFFER_NIL; /* * Resolve interface(s). */ pThis->pIRhPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, VUSBIROOTHUBPORT); AssertMsgReturn(pThis->pIRhPort, ("Configuration error: the device/driver above us doesn't expose any VUSBIROOTHUBPORT interface!\n"), VERR_PDM_MISSING_INTERFACE_ABOVE); /* * Get number of ports and the availability bitmap. * ASSUME that the number of ports reported now at creation time is the max number. */ pThis->Hub.cPorts = pThis->pIRhPort->pfnGetAvailablePorts(pThis->pIRhPort, &pThis->Bitmap); Log(("vusbRhConstruct: cPorts=%d\n", pThis->Hub.cPorts)); /* * Get the USB version of the attached HC. * ASSUME that version 2.0 implies high-speed. */ pThis->fHcVersions = pThis->pIRhPort->pfnGetUSBVersions(pThis->pIRhPort); Log(("vusbRhConstruct: fHcVersions=%u\n", pThis->fHcVersions)); if (pszCaptureFilename) { rc = VUSBSnifferCreate(&pThis->hSniffer, 0, pszCaptureFilename, NULL); if (RT_FAILURE(rc)) return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS, N_("VUSBSniffer cannot open '%s' for writing. The directory must exist and it must be writable for the current user"), pszCaptureFilename); MMR3HeapFree(pszCaptureFilename); } /* * Register ourselves as a USB hub. * The current implementation uses the VUSBIRHCONFIG interface for communication. */ PCPDMUSBHUBHLP pHlp; /* not used currently */ rc = PDMDrvHlpUSBRegisterHub(pDrvIns, pThis->fHcVersions, pThis->Hub.cPorts, &g_vusbHubReg, &pHlp); if (RT_FAILURE(rc)) return rc; /* * Statistics. (It requires a 30" monitor or extremely tiny fonts to edit this "table".) */ #ifdef VBOX_WITH_STATISTICS PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs submitted.", "/VUSB/%d/UrbsSubmitted", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsSubmitted/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsSubmitted/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsSubmitted/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsSubmitted/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs cancelled. (included in failed)", "/VUSB/%d/UrbsCancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsCancelled/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsCancelled/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsCancelled/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsCancelled/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs failing.", "/VUSB/%d/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsFailed/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsFailed/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsFailed/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsFailed/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested transfer.", "/VUSB/%d/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested read transfer.", "/VUSB/%d/ReqReadBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqReadBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqReadBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqReadBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqReadBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested write transfer.", "/VUSB/%d/ReqWriteBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqWriteBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqWriteBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqWriteBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqWriteBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total transfer.", "/VUSB/%d/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total read transfer.", "/VUSB/%d/ActReadBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActReadBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActReadBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActReadBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActReadBytes/Isoc", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total write transfer.", "/VUSB/%d/ActWriteBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActWriteBytes/Bulk", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActWriteBytes/Ctrl", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActWriteBytes/Intr", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActWriteBytes/Isoc", pDrvIns->iInstance); /* bulk */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Bulk/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Bulk/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Bulk/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Bulk/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Bulk/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ReqBytes/Write", pDrvIns->iInstance); /* control */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Ctrl/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Ctrl/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Ctrl/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Ctrl/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Ctrl/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ReqBytes/Write", pDrvIns->iInstance); /* interrupt */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Intr/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Intr/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Intr/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Intr/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Intr/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ReqBytes/Write", pDrvIns->iInstance); /* isochronous */ PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Isoc/Urbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Isoc/UrbsFailed", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Isoc/UrbsFailed/Cancelled", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Isoc/ActBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ActBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ActBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Isoc/ReqBytes", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ReqBytes/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ReqBytes/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of isochronous packets returning data.", "/VUSB/%d/Isoc/ActPkts", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ActPkts/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ActPkts/Write", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Requested number of isochronous packets.", "/VUSB/%d/Isoc/ReqPkts", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ReqPkts/Read", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ReqPkts/Write", pDrvIns->iInstance); for (unsigned i = 0; i < RT_ELEMENTS(pThis->aStatIsocDetails); i++) { PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Pkts, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok0", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun0", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataOverrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataOverrun", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].NotAccessed, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/NotAccessed", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Misc, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Misc", pDrvIns->iInstance, i); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Bytes, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_BYTES, ".", "/VUSB/%d/Isoc/%d/Bytes", pDrvIns->iInstance, i); } PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatReapAsyncUrbs, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Profiling the vusbRhReapAsyncUrbs body (omitting calls when nothing is in-flight).", "/VUSB/%d/ReapAsyncUrbs", pDrvIns->iInstance); PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatSubmitUrb, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Profiling the vusbRhSubmitUrb body.", "/VUSB/%d/SubmitUrb", pDrvIns->iInstance); #endif PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->cUrbsInPool, STAMTYPE_U32, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs in the pool.", "/VUSB/%d/cUrbsInPool", pDrvIns->iInstance); return VINF_SUCCESS; } /** * VUSB Root Hub driver registration record. */ const PDMDRVREG g_DrvVUSBRootHub = { /* u32Version */ PDM_DRVREG_VERSION, /* szName */ "VUSBRootHub", /* szRCMod */ "", /* szR0Mod */ "", /* pszDescription */ "VUSB Root Hub Driver.", /* fFlags */ PDM_DRVREG_FLAGS_HOST_BITS_DEFAULT, /* fClass. */ PDM_DRVREG_CLASS_USB, /* cMaxInstances */ ~0U, /* cbInstance */ sizeof(VUSBROOTHUB), /* pfnConstruct */ vusbRhConstruct, /* pfnDestruct */ vusbRhDestruct, /* pfnRelocate */ NULL, /* pfnIOCtl */ NULL, /* pfnPowerOn */ NULL, /* pfnReset */ NULL, /* pfnSuspend */ NULL, /* pfnResume */ NULL, /* pfnAttach */ NULL, /* pfnDetach */ NULL, /* pfnPowerOff */ NULL, /* pfnSoftReset */ NULL, /* u32EndVersion */ PDM_DRVREG_VERSION }; /* * Local Variables: * mode: c * c-file-style: "bsd" * c-basic-offset: 4 * tab-width: 4 * indent-tabs-mode: s * End: */