VirtualBox

source: vbox/trunk/src/VBox/Devices/USB/DrvVUSBRootHub.cpp@ 74901

Last change on this file since 74901 was 69500, checked in by vboxsync, 7 years ago

*: scm --update-copyright-year

  • Property svn:eol-style set to native
  • Property svn:keywords set to Author Date Id Revision
File size: 74.3 KB
Line 
1/* $Id: DrvVUSBRootHub.cpp 69500 2017-10-28 15:14:05Z vboxsync $ */
2/** @file
3 * Virtual USB - Root Hub Driver.
4 */
5
6/*
7 * Copyright (C) 2005-2017 Oracle Corporation
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 */
17
18
19/** @page pg_dev_vusb VUSB - Virtual USB
20 *
21 * @todo read thru this and correct typos. Merge with old docs.
22 *
23 *
24 * The Virtual USB component glues USB devices and host controllers together.
25 * The VUSB takes the form of a PDM driver which is attached to the HCI. USB
26 * devices are created by, attached to, and managed by the VUSB roothub. The
27 * VUSB also exposes an interface which is used by Main to attach and detach
28 * proxied USB devices.
29 *
30 *
31 * @section sec_dev_vusb_urb The Life of an URB
32 *
33 * The URB is created when the HCI calls the roothub (VUSB) method pfnNewUrb.
34 * VUSB has a pool of URBs, if no free URBs are available a new one is
35 * allocated. The returned URB starts life in the ALLOCATED state and all
36 * fields are initialized with sensible defaults.
37 *
38 * The HCI then copies any request data into the URB if it's an host2dev
39 * transfer. It then submits the URB by calling the pfnSubmitUrb roothub
40 * method.
41 *
42 * pfnSubmitUrb will start by checking if it knows the device address, and if
43 * it doesn't the URB is completed with a device-not-ready error. When the
44 * device address is known to it, action is taken based on the kind of
45 * transfer it is. There are four kinds of transfers: 1. control, 2. bulk,
46 * 3. interrupt, and 4. isochronous. In either case something eventually ends
47 * up being submitted to the device.
48 *
49 *
50 * If an URB fails submitting, may or may not be completed. This depends on
51 * heuristics in some cases and on the kind of failure in others. If
52 * pfnSubmitUrb returns a failure, the HCI should retry submitting it at a
53 * later time. If pfnSubmitUrb returns success the URB is submitted, and it
54 * can even been completed.
55 *
56 * The URB is in the IN_FLIGHT state from the time it's successfully submitted
57 * and till it's reaped or cancelled.
58 *
59 * When an URB transfer or in some case submit failure occurs, the pfnXferError
60 * callback of the HCI is consulted about what to do. If pfnXferError indicates
61 * that the URB should be retried, pfnSubmitUrb will fail. If it indicates that
62 * it should fail, the URB will be completed.
63 *
64 * Completing an URB means that the URB status is set and the HCI
65 * pfnXferCompletion callback is invoked with the URB. The HCI is the supposed
66 * to report the transfer status to the guest OS. After completion the URB
67 * is freed and returned to the pool, unless it was cancelled. If it was
68 * cancelled it will have to await reaping before it's actually freed.
69 *
70 *
71 * @subsection subsec_dev_vusb_urb_ctrl Control
72 *
73 * The control transfer is the most complex one, from VUSB's point of view,
74 * with its three stages and being bi-directional. A control transfer starts
75 * with a SETUP packet containing the request description and two basic
76 * parameters. It is followed by zero or more DATA packets which either picks
77 * up incoming data (dev2host) or supplies the request data (host2dev). This
78 * can then be followed by a STATUS packet which gets the status of the whole
79 * transfer.
80 *
81 * What makes the control transfer complicated is that for a host2dev request
82 * the URB is assembled from the SETUP and DATA stage, and for a dev2host
83 * request the returned data must be kept around for the DATA stage. For both
84 * transfer directions the status of the transfer has to be kept around for
85 * the STATUS stage.
86 *
87 * To complicate matters further, VUSB must intercept and in some cases emulate
88 * some of the standard requests in order to keep the virtual device state
89 * correct and provide the correct virtualization of a device.
90 *
91 * @subsection subsec_dev_vusb_urb_bulk Bulk and Interrupt
92 *
93 * The bulk and interrupt transfer types are relativly simple compared to the
94 * control transfer. VUSB is not inspecting the request content or anything,
95 * but passes it down the device.
96 *
97 * @subsection subsec_dev_vusb_urb_isoc Isochronous
98 *
99 * This kind of transfers hasn't yet been implemented.
100 *
101 */
102
103
104/** @page pg_dev_vusb_old VUSB - Virtual USB Core
105 *
106 * The virtual USB core is controlled by the roothub and the underlying HCI
107 * emulator, it is responsible for device addressing, managing configurations,
108 * interfaces and endpoints, assembling and splitting multi-part control
109 * messages and in general acts as a middle layer between the USB device
110 * emulation code and USB HCI emulation code.
111 *
112 * All USB devices are represented by a struct vusb_dev. This structure
113 * contains things like the device state, device address, all the configuration
114 * descriptors, the currently selected configuration and a mapping between
115 * endpoint addresses and endpoint descriptors.
116 *
117 * Each vusb_dev also has a pointer to a vusb_dev_ops structure which serves as
118 * the virtual method table and includes a virtual constructor and destructor.
119 * After a vusb_dev is created it may be attached to a hub device such as a
120 * roothub (using vusbHubAttach). Although each hub structure has cPorts
121 * and cDevices fields, it is the responsibility of the hub device to allocate
122 * a free port for the new device.
123 *
124 * Devices can chose one of two interfaces for dealing with requests, the
125 * synchronous interface or the asynchronous interface. The synchronous
126 * interface is much simpler and ought to be used for devices which are
127 * unlikely to sleep for long periods in order to serve requests. The
128 * asynchronous interface on the other hand is more difficult to use but is
129 * useful for the USB proxy or if one were to write a mass storage device
130 * emulator. Currently the synchronous interface only supports control and bulk
131 * endpoints and is no longer used by anything.
132 *
133 * In order to use the asynchronous interface, the queue_urb, cancel_urb and
134 * pfnUrbReap fields must be set in the devices vusb_dev_ops structure. The
135 * queue_urb method is used to submit a request to a device without blocking,
136 * it returns 1 if successful and 0 on any kind of failure. A successfully
137 * queued URB is completed when the pfnUrbReap method returns it. Each function
138 * address is reference counted so that pfnUrbReap will only be called if there
139 * are URBs outstanding. For a roothub to reap an URB from any one of it's
140 * devices, the vusbRhReapAsyncUrbs() function is used.
141 *
142 * There are four types of messages an URB may contain:
143 * -# Control - represents a single packet of a multi-packet control
144 * transfer, these are only really used by the host controller to
145 * submit the parts to the usb core.
146 * -# Message - the usb core assembles multiple control transfers in
147 * to single message transfers. In this case the data buffer
148 * contains the setup packet in little endian followed by the full
149 * buffer. In the case of an host-to-device control message, the
150 * message packet is created when the STATUS transfer is seen. In
151 * the case of device-to-host messages, the message packet is
152 * created after the SETUP transfer is seen. Also, certain control
153 * requests never go the real device and get handled synchronously.
154 * -# Bulk - Currently the only endpoint type that does error checking
155 * and endpoint halting.
156 * -# Interrupt - The only non-periodic type supported.
157 *
158 * Hubs are special cases of devices, they have a number of downstream ports
159 * that other devices can be attached to and removed from.
160 *
161 * After a device has been attached (vusbHubAttach):
162 * -# The hub attach method is called, which sends a hub status
163 * change message to the OS.
164 * -# The OS resets the device, and it appears on the default
165 * address with it's config 0 selected (a pseudo-config that
166 * contains only 1 interface with 1 endpoint - the default
167 * message pipe).
168 * -# The OS assigns the device a new address and selects an
169 * appropriate config.
170 * -# The device is ready.
171 *
172 * After a device has been detached (vusbDevDetach):
173 * -# All pending URBs are cancelled.
174 * -# The devices address is unassigned.
175 * -# The hub detach method is called which signals the OS
176 * of the status change.
177 * -# The OS unlinks the ED's for that device.
178 *
179 * A device can also request detachment from within its own methods by
180 * calling vusbDevUnplugged().
181 *
182 * Roothubs are responsible for driving the whole system, they are special
183 * cases of hubs and as such implement attach and detach methods, each one
184 * is described by a struct vusb_roothub. Once a roothub has submitted an
185 * URB to the USB core, a number of callbacks to the roothub are required
186 * for when the URB completes, since the roothub typically wants to inform
187 * the OS when transfers are completed.
188 *
189 * There are four callbacks to be concerned with:
190 * -# prepare - This is called after the URB is successfully queued.
191 * -# completion - This is called after the URB completed.
192 * -# error - This is called if the URB errored, some systems have
193 * automatic resubmission of failed requests, so this callback
194 * should keep track of the error count and return 1 if the count
195 * is above the number of allowed resubmissions.
196 * -# halt_ep - This is called after errors on bulk pipes in order
197 * to halt the pipe.
198 *
199 */
200
201
202/*********************************************************************************************************************************
203* Header Files *
204*********************************************************************************************************************************/
205#define LOG_GROUP LOG_GROUP_DRV_VUSB
206#include <VBox/vmm/pdm.h>
207#include <VBox/vmm/vmapi.h>
208#include <VBox/err.h>
209#include <iprt/alloc.h>
210#include <VBox/log.h>
211#include <iprt/time.h>
212#include <iprt/thread.h>
213#include <iprt/semaphore.h>
214#include <iprt/string.h>
215#include <iprt/assert.h>
216#include <iprt/asm.h>
217#include <iprt/uuid.h>
218#include "VUSBInternal.h"
219#include "VBoxDD.h"
220
221
222
223/**
224 * Attaches a device to a specific hub.
225 *
226 * This function is called by the vusb_add_device() and vusbRhAttachDevice().
227 *
228 * @returns VBox status code.
229 * @param pHub The hub to attach it to.
230 * @param pDev The device to attach.
231 * @thread EMT
232 */
233static int vusbHubAttach(PVUSBHUB pHub, PVUSBDEV pDev)
234{
235 LogFlow(("vusbHubAttach: pHub=%p[%s] pDev=%p[%s]\n", pHub, pHub->pszName, pDev, pDev->pUsbIns->pszName));
236 AssertMsg(pDev->enmState == VUSB_DEVICE_STATE_DETACHED, ("enmState=%d\n", pDev->enmState));
237
238 pDev->pHub = pHub;
239 pDev->enmState = VUSB_DEVICE_STATE_ATTACHED;
240
241 /* noone else ever messes with the default pipe while we are attached */
242 vusbDevMapEndpoint(pDev, &g_Endpoint0);
243 vusbDevDoSelectConfig(pDev, &g_Config0);
244
245 int rc = pHub->pOps->pfnAttach(pHub, pDev);
246 if (RT_FAILURE(rc))
247 {
248 pDev->pHub = NULL;
249 pDev->enmState = VUSB_DEVICE_STATE_DETACHED;
250 }
251 return rc;
252}
253
254
255/* -=-=-=-=-=- PDMUSBHUBREG methods -=-=-=-=-=- */
256
257/** @interface_method_impl{PDMUSBHUBREG,pfnAttachDevice} */
258static DECLCALLBACK(int) vusbPDMHubAttachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, const char *pszCaptureFilename, uint32_t *piPort)
259{
260 PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
261
262 /*
263 * Allocate a new VUSB device and initialize it.
264 */
265 PVUSBDEV pDev = (PVUSBDEV)RTMemAllocZ(sizeof(*pDev));
266 AssertReturn(pDev, VERR_NO_MEMORY);
267 int rc = vusbDevInit(pDev, pUsbIns, pszCaptureFilename);
268 if (RT_SUCCESS(rc))
269 {
270 pUsbIns->pvVUsbDev2 = pDev;
271 rc = vusbHubAttach(&pThis->Hub, pDev);
272 if (RT_SUCCESS(rc))
273 {
274 *piPort = UINT32_MAX; /// @todo implement piPort
275 return rc;
276 }
277
278 RTMemFree(pDev->paIfStates);
279 pUsbIns->pvVUsbDev2 = NULL;
280 }
281 vusbDevRelease(pDev);
282 return rc;
283}
284
285
286/** @interface_method_impl{PDMUSBHUBREG,pfnDetachDevice} */
287static DECLCALLBACK(int) vusbPDMHubDetachDevice(PPDMDRVINS pDrvIns, PPDMUSBINS pUsbIns, uint32_t iPort)
288{
289 RT_NOREF(pDrvIns, iPort);
290 PVUSBDEV pDev = (PVUSBDEV)pUsbIns->pvVUsbDev2;
291 Assert(pDev);
292
293 /*
294 * Deal with pending async reset.
295 * (anything but reset)
296 */
297 vusbDevSetStateCmp(pDev, VUSB_DEVICE_STATE_DEFAULT, VUSB_DEVICE_STATE_RESET);
298
299 /*
300 * Detach and free resources.
301 */
302 if (pDev->pHub)
303 vusbDevDetach(pDev);
304
305 vusbDevRelease(pDev);
306 return VINF_SUCCESS;
307}
308
309/**
310 * The hub registration structure.
311 */
312static const PDMUSBHUBREG g_vusbHubReg =
313{
314 PDM_USBHUBREG_VERSION,
315 vusbPDMHubAttachDevice,
316 vusbPDMHubDetachDevice,
317 PDM_USBHUBREG_VERSION
318};
319
320
321/* -=-=-=-=-=- VUSBIROOTHUBCONNECTOR methods -=-=-=-=-=- */
322
323
324/**
325 * Finds an device attached to a roothub by it's address.
326 *
327 * @returns Pointer to the device.
328 * @returns NULL if not found.
329 * @param pRh Pointer to the root hub.
330 * @param Address The device address.
331 */
332static PVUSBDEV vusbRhFindDevByAddress(PVUSBROOTHUB pRh, uint8_t Address)
333{
334 unsigned iHash = vusbHashAddress(Address);
335 PVUSBDEV pDev = NULL;
336
337 RTCritSectEnter(&pRh->CritSectDevices);
338 for (PVUSBDEV pCur = pRh->apAddrHash[iHash]; pCur; pCur = pCur->pNextHash)
339 if (pCur->u8Address == Address)
340 {
341 pDev = pCur;
342 break;
343 }
344
345 if (pDev)
346 vusbDevRetain(pDev);
347 RTCritSectLeave(&pRh->CritSectDevices);
348 return pDev;
349}
350
351
352/**
353 * Callback for freeing an URB.
354 * @param pUrb The URB to free.
355 */
356static DECLCALLBACK(void) vusbRhFreeUrb(PVUSBURB pUrb)
357{
358 /*
359 * Assert sanity.
360 */
361 vusbUrbAssert(pUrb);
362 PVUSBROOTHUB pRh = (PVUSBROOTHUB)pUrb->pVUsb->pvFreeCtx;
363 Assert(pRh);
364
365 Assert(pUrb->enmState != VUSBURBSTATE_FREE);
366
367 /*
368 * Free the URB description (logging builds only).
369 */
370 if (pUrb->pszDesc)
371 {
372 RTStrFree(pUrb->pszDesc);
373 pUrb->pszDesc = NULL;
374 }
375
376 /* The URB comes from the roothub if there is no device (invalid address). */
377 if (pUrb->pVUsb->pDev)
378 {
379 PVUSBDEV pDev = pUrb->pVUsb->pDev;
380
381 vusbUrbPoolFree(&pUrb->pVUsb->pDev->UrbPool, pUrb);
382 vusbDevRelease(pDev);
383 }
384 else
385 vusbUrbPoolFree(&pRh->Hub.Dev.UrbPool, pUrb);
386}
387
388
389/**
390 * Worker routine for vusbRhConnNewUrb().
391 */
392static PVUSBURB vusbRhNewUrb(PVUSBROOTHUB pRh, uint8_t DstAddress, PVUSBDEV pDev, VUSBXFERTYPE enmType,
393 VUSBDIRECTION enmDir, uint32_t cbData, uint32_t cTds, const char *pszTag)
394{
395 RT_NOREF(pszTag);
396 PVUSBURBPOOL pUrbPool = &pRh->Hub.Dev.UrbPool;
397
398 if (!pDev)
399 pDev = vusbRhFindDevByAddress(pRh, DstAddress);
400 else
401 vusbDevRetain(pDev);
402
403 if (pDev)
404 pUrbPool = &pDev->UrbPool;
405
406 PVUSBURB pUrb = vusbUrbPoolAlloc(pUrbPool, enmType, enmDir, cbData,
407 pRh->cbHci, pRh->cbHciTd, cTds);
408 if (RT_LIKELY(pUrb))
409 {
410 pUrb->pVUsb->pvFreeCtx = pRh;
411 pUrb->pVUsb->pfnFree = vusbRhFreeUrb;
412 pUrb->DstAddress = DstAddress;
413 pUrb->pVUsb->pDev = pDev;
414
415#ifdef LOG_ENABLED
416 const char *pszType = NULL;
417
418 switch(pUrb->enmType)
419 {
420 case VUSBXFERTYPE_CTRL:
421 pszType = "ctrl";
422 break;
423 case VUSBXFERTYPE_INTR:
424 pszType = "intr";
425 break;
426 case VUSBXFERTYPE_BULK:
427 pszType = "bulk";
428 break;
429 case VUSBXFERTYPE_ISOC:
430 pszType = "isoc";
431 break;
432 default:
433 pszType = "invld";
434 break;
435 }
436
437 pRh->iSerial = (pRh->iSerial + 1) % 10000;
438 RTStrAPrintf(&pUrb->pszDesc, "URB %p %s%c%04d (%s)", pUrb, pszType,
439 (pUrb->enmDir == VUSBDIRECTION_IN) ? '<' : ((pUrb->enmDir == VUSBDIRECTION_SETUP) ? 's' : '>'),
440 pRh->iSerial, pszTag ? pszTag : "<none>");
441#endif
442 }
443
444 return pUrb;
445}
446
447
448/**
449 * Calculate frame timer variables given a frame rate.
450 */
451static void vusbRhR3CalcTimerIntervals(PVUSBROOTHUB pThis, uint32_t u32FrameRate)
452{
453 pThis->nsWait = RT_NS_1SEC / u32FrameRate;
454 pThis->uFrameRate = u32FrameRate;
455 /* Inform the HCD about the new frame rate. */
456 pThis->pIRhPort->pfnFrameRateChanged(pThis->pIRhPort, u32FrameRate);
457}
458
459
460/**
461 * Calculates the new frame rate based on the idle detection and number of idle
462 * cycles.
463 *
464 * @returns nothing.
465 * @param pThis The roothub instance data.
466 * @param fIdle Flag whether the last frame didn't produce any activity.
467 */
468static void vusbRhR3FrameRateCalcNew(PVUSBROOTHUB pThis, bool fIdle)
469{
470 uint32_t uNewFrameRate = pThis->uFrameRate;
471
472 /*
473 * Adjust the frame timer interval based on idle detection.
474 */
475 if (fIdle)
476 {
477 pThis->cIdleCycles++;
478 /* Set the new frame rate based on how long we've been idle. Tunable. */
479 switch (pThis->cIdleCycles)
480 {
481 case 4: uNewFrameRate = 500; break; /* 2ms interval */
482 case 16:uNewFrameRate = 125; break; /* 8ms interval */
483 case 24:uNewFrameRate = 50; break; /* 20ms interval */
484 default: break;
485 }
486 /* Avoid overflow. */
487 if (pThis->cIdleCycles > 60000)
488 pThis->cIdleCycles = 20000;
489 }
490 else
491 {
492 if (pThis->cIdleCycles)
493 {
494 pThis->cIdleCycles = 0;
495 uNewFrameRate = pThis->uFrameRateDefault;
496 }
497 }
498
499 if ( uNewFrameRate != pThis->uFrameRate
500 && uNewFrameRate)
501 {
502 LogFlow(("Frame rate changed from %u to %u\n", pThis->uFrameRate, uNewFrameRate));
503 vusbRhR3CalcTimerIntervals(pThis, uNewFrameRate);
504 }
505}
506
507
508/**
509 * The core frame processing routine keeping track of the elapsed time and calling into
510 * the device emulation above us to do the work.
511 *
512 * @returns Relative timespan when to process the next frame.
513 * @param pThis The roothub instance data.
514 * @param fCallback Flag whether this method is called from the URB completion callback or
515 * from the worker thread (only used for statistics).
516 */
517DECLHIDDEN(uint64_t) vusbRhR3ProcessFrame(PVUSBROOTHUB pThis, bool fCallback)
518{
519 uint64_t tsNext = 0;
520 uint64_t tsNanoStart = RTTimeNanoTS();
521
522 /* Don't do anything if we are not supposed to process anything (EHCI and XHCI). */
523 if (!pThis->uFrameRateDefault)
524 return 0;
525
526 if (ASMAtomicXchgBool(&pThis->fFrameProcessing, true))
527 return pThis->nsWait;
528
529 if ( tsNanoStart > pThis->tsFrameProcessed
530 && tsNanoStart - pThis->tsFrameProcessed >= 750 * RT_NS_1US)
531 {
532 LogFlowFunc(("Starting new frame at ts %llu\n", tsNanoStart));
533
534 bool fIdle = pThis->pIRhPort->pfnStartFrame(pThis->pIRhPort, 0 /* u32FrameNo */);
535 vusbRhR3FrameRateCalcNew(pThis, fIdle);
536
537 uint64_t tsNow = RTTimeNanoTS();
538 tsNext = (tsNanoStart + pThis->nsWait) > tsNow ? (tsNanoStart + pThis->nsWait) - tsNow : 0;
539 pThis->tsFrameProcessed = tsNanoStart;
540 LogFlowFunc(("Current frame took %llu nano seconds to process, next frame in %llu ns\n", tsNow - tsNanoStart, tsNext));
541 if (fCallback)
542 STAM_COUNTER_INC(&pThis->StatFramesProcessedClbk);
543 else
544 STAM_COUNTER_INC(&pThis->StatFramesProcessedThread);
545 }
546 else
547 {
548 tsNext = (pThis->tsFrameProcessed + pThis->nsWait) > tsNanoStart ? (pThis->tsFrameProcessed + pThis->nsWait) - tsNanoStart : 0;
549 LogFlowFunc(("Next frame is too far away in the future, waiting... (tsNanoStart=%llu tsFrameProcessed=%llu)\n",
550 tsNanoStart, pThis->tsFrameProcessed));
551 }
552
553 ASMAtomicXchgBool(&pThis->fFrameProcessing, false);
554 LogFlowFunc(("returns %llu\n", tsNext));
555 return tsNext;
556}
557
558
559/**
560 * Worker for processing frames periodically.
561 *
562 * @returns VBox status code.
563 * @param pDrvIns The driver instance.
564 * @param pThread The PDM thread structure for the thread this worker runs on.
565 */
566static DECLCALLBACK(int) vusbRhR3PeriodFrameWorker(PPDMDRVINS pDrvIns, PPDMTHREAD pThread)
567{
568 RT_NOREF(pDrvIns);
569 int rc = VINF_SUCCESS;
570 PVUSBROOTHUB pThis = (PVUSBROOTHUB)pThread->pvUser;
571
572 if (pThread->enmState == PDMTHREADSTATE_INITIALIZING)
573 return VINF_SUCCESS;
574
575 while (pThread->enmState == PDMTHREADSTATE_RUNNING)
576 {
577 while ( !ASMAtomicReadU32(&pThis->uFrameRateDefault)
578 && pThread->enmState == PDMTHREADSTATE_RUNNING)
579 {
580 /* Signal the waiter that we are stopped now. */
581 rc = RTSemEventMultiSignal(pThis->hSemEventPeriodFrameStopped);
582 AssertRC(rc);
583
584 rc = RTSemEventMultiWait(pThis->hSemEventPeriodFrame, RT_INDEFINITE_WAIT);
585 RTSemEventMultiReset(pThis->hSemEventPeriodFrame);
586
587 /*
588 * Notify the device above about the frame rate changed if we are supposed to
589 * process frames.
590 */
591 uint32_t uFrameRate = ASMAtomicReadU32(&pThis->uFrameRateDefault);
592 if (uFrameRate)
593 vusbRhR3CalcTimerIntervals(pThis, uFrameRate);
594 }
595
596 AssertLogRelMsgReturn(RT_SUCCESS(rc) || rc == VERR_TIMEOUT, ("%Rrc\n", rc), rc);
597 if (RT_UNLIKELY(pThread->enmState != PDMTHREADSTATE_RUNNING))
598 break;
599
600 uint64_t tsNext = vusbRhR3ProcessFrame(pThis, false /* fCallback */);
601
602 if (tsNext >= 250 * RT_NS_1US)
603 {
604 rc = RTSemEventMultiWaitEx(pThis->hSemEventPeriodFrame, RTSEMWAIT_FLAGS_RELATIVE | RTSEMWAIT_FLAGS_NANOSECS | RTSEMWAIT_FLAGS_UNINTERRUPTIBLE,
605 tsNext);
606 AssertLogRelMsg(RT_SUCCESS(rc) || rc == VERR_TIMEOUT, ("%Rrc\n", rc));
607 RTSemEventMultiReset(pThis->hSemEventPeriodFrame);
608 }
609 }
610
611 return VINF_SUCCESS;
612}
613
614
615/**
616 * Unblock the periodic frame thread so it can respond to a state change.
617 *
618 * @returns VBox status code.
619 * @param pDrvIns The driver instance.
620 * @param pThread The send thread.
621 */
622static DECLCALLBACK(int) vusbRhR3PeriodFrameWorkerWakeup(PPDMDRVINS pDrvIns, PPDMTHREAD pThread)
623{
624 RT_NOREF(pThread);
625 PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
626 return RTSemEventMultiSignal(pThis->hSemEventPeriodFrame);
627}
628
629
630/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSetUrbParams} */
631static DECLCALLBACK(int) vusbRhSetUrbParams(PVUSBIROOTHUBCONNECTOR pInterface, size_t cbHci, size_t cbHciTd)
632{
633 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
634
635 pRh->cbHci = cbHci;
636 pRh->cbHciTd = cbHciTd;
637
638 return VINF_SUCCESS;
639}
640
641
642/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnNewUrb} */
643static DECLCALLBACK(PVUSBURB) vusbRhConnNewUrb(PVUSBIROOTHUBCONNECTOR pInterface, uint8_t DstAddress, PVUSBIDEVICE pDev, VUSBXFERTYPE enmType,
644 VUSBDIRECTION enmDir, uint32_t cbData, uint32_t cTds, const char *pszTag)
645{
646 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
647 return vusbRhNewUrb(pRh, DstAddress, (PVUSBDEV)pDev, enmType, enmDir, cbData, cTds, pszTag);
648}
649
650
651/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnFreeUrb} */
652static DECLCALLBACK(int) vusbRhConnFreeUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb)
653{
654 RT_NOREF(pInterface);
655 pUrb->pVUsb->pfnFree(pUrb);
656 return VINF_SUCCESS;
657}
658
659
660/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSubmitUrb} */
661static DECLCALLBACK(int) vusbRhSubmitUrb(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb, PPDMLED pLed)
662{
663 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
664 STAM_PROFILE_START(&pRh->StatSubmitUrb, a);
665
666#ifdef VBOX_WITH_STATISTICS
667 /*
668 * Total and per-type submit statistics.
669 */
670 Assert(pUrb->enmType >= 0 && pUrb->enmType < (int)RT_ELEMENTS(pRh->aTypes));
671 STAM_COUNTER_INC(&pRh->Total.StatUrbsSubmitted);
672 STAM_COUNTER_INC(&pRh->aTypes[pUrb->enmType].StatUrbsSubmitted);
673
674 STAM_COUNTER_ADD(&pRh->Total.StatReqBytes, pUrb->cbData);
675 STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqBytes, pUrb->cbData);
676 if (pUrb->enmDir == VUSBDIRECTION_IN)
677 {
678 STAM_COUNTER_ADD(&pRh->Total.StatReqReadBytes, pUrb->cbData);
679 STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqReadBytes, pUrb->cbData);
680 }
681 else
682 {
683 STAM_COUNTER_ADD(&pRh->Total.StatReqWriteBytes, pUrb->cbData);
684 STAM_COUNTER_ADD(&pRh->aTypes[pUrb->enmType].StatReqWriteBytes, pUrb->cbData);
685 }
686
687 if (pUrb->enmType == VUSBXFERTYPE_ISOC)
688 {
689 STAM_COUNTER_ADD(&pRh->StatIsocReqPkts, pUrb->cIsocPkts);
690 if (pUrb->enmDir == VUSBDIRECTION_IN)
691 STAM_COUNTER_ADD(&pRh->StatIsocReqReadPkts, pUrb->cIsocPkts);
692 else
693 STAM_COUNTER_ADD(&pRh->StatIsocReqWritePkts, pUrb->cIsocPkts);
694 }
695#endif
696
697 /* If there is a sniffer on the roothub record the URB there. */
698 if (pRh->hSniffer != VUSBSNIFFER_NIL)
699 {
700 int rc = VUSBSnifferRecordEvent(pRh->hSniffer, pUrb, VUSBSNIFFEREVENT_SUBMIT);
701 if (RT_FAILURE(rc))
702 LogRel(("VUSB: Capturing URB submit event on the root hub failed with %Rrc\n", rc));
703 }
704
705 /*
706 * The device was resolved when we allocated the URB.
707 * Submit it to the device if we found it, if not fail with device-not-ready.
708 */
709 int rc;
710 if ( pUrb->pVUsb->pDev
711 && pUrb->pVUsb->pDev->pUsbIns)
712 {
713 switch (pUrb->enmDir)
714 {
715 case VUSBDIRECTION_IN:
716 pLed->Asserted.s.fReading = pLed->Actual.s.fReading = 1;
717 rc = vusbUrbSubmit(pUrb);
718 pLed->Actual.s.fReading = 0;
719 break;
720 case VUSBDIRECTION_OUT:
721 pLed->Asserted.s.fWriting = pLed->Actual.s.fWriting = 1;
722 rc = vusbUrbSubmit(pUrb);
723 pLed->Actual.s.fWriting = 0;
724 break;
725 default:
726 rc = vusbUrbSubmit(pUrb);
727 break;
728 }
729
730 if (RT_FAILURE(rc))
731 {
732 LogFlow(("vusbRhSubmitUrb: freeing pUrb=%p\n", pUrb));
733 pUrb->pVUsb->pfnFree(pUrb);
734 }
735 }
736 else
737 {
738 vusbDevRetain(&pRh->Hub.Dev);
739 pUrb->pVUsb->pDev = &pRh->Hub.Dev;
740 Log(("vusb: pRh=%p: SUBMIT: Address %i not found!!!\n", pRh, pUrb->DstAddress));
741
742 pUrb->enmState = VUSBURBSTATE_REAPED;
743 pUrb->enmStatus = VUSBSTATUS_DNR;
744 vusbUrbCompletionRh(pUrb);
745 rc = VINF_SUCCESS;
746 }
747
748 STAM_PROFILE_STOP(&pRh->StatSubmitUrb, a);
749 return rc;
750}
751
752
753static DECLCALLBACK(int) vusbRhReapAsyncUrbsWorker(PVUSBDEV pDev, RTMSINTERVAL cMillies)
754{
755 if (!cMillies)
756 vusbUrbDoReapAsync(&pDev->LstAsyncUrbs, 0);
757 else
758 {
759 uint64_t u64Start = RTTimeMilliTS();
760 do
761 {
762 vusbUrbDoReapAsync(&pDev->LstAsyncUrbs, RT_MIN(cMillies >> 8, 10));
763 } while ( !RTListIsEmpty(&pDev->LstAsyncUrbs)
764 && RTTimeMilliTS() - u64Start < cMillies);
765 }
766
767 return VINF_SUCCESS;
768}
769
770/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnReapAsyncUrbs} */
771static DECLCALLBACK(void) vusbRhReapAsyncUrbs(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, RTMSINTERVAL cMillies)
772{
773 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface); NOREF(pRh);
774 PVUSBDEV pDev = (PVUSBDEV)pDevice;
775
776 if (RTListIsEmpty(&pDev->LstAsyncUrbs))
777 return;
778
779 STAM_PROFILE_START(&pRh->StatReapAsyncUrbs, a);
780 int rc = vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhReapAsyncUrbsWorker, 2, pDev, cMillies);
781 AssertRC(rc);
782 STAM_PROFILE_STOP(&pRh->StatReapAsyncUrbs, a);
783}
784
785
786/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnCancelUrbsEp} */
787static DECLCALLBACK(int) vusbRhCancelUrbsEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBURB pUrb)
788{
789 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
790 AssertReturn(pRh, VERR_INVALID_PARAMETER);
791 AssertReturn(pUrb, VERR_INVALID_PARAMETER);
792
793 /// @todo This method of URB canceling may not work on non-Linux hosts.
794 /*
795 * Cancel and reap the URB(s) on an endpoint.
796 */
797 LogFlow(("vusbRhCancelUrbsEp: pRh=%p pUrb=%p\n", pRh, pUrb));
798
799 vusbUrbCancelAsync(pUrb, CANCELMODE_UNDO);
800
801 /* The reaper thread will take care of completing the URB. */
802
803 return VINF_SUCCESS;
804}
805
806/**
807 * Worker doing the actual cancelling of all outstanding URBs on the device I/O thread.
808 *
809 * @returns VBox status code.
810 * @param pDev USB device instance data.
811 */
812static DECLCALLBACK(int) vusbRhCancelAllUrbsWorker(PVUSBDEV pDev)
813{
814 /*
815 * Cancel the URBS.
816 *
817 * Not using th CritAsyncUrbs critical section here is safe
818 * as the I/O thread is the only thread accessing this struture at the
819 * moment.
820 */
821 PVUSBURBVUSB pVUsbUrb, pVUsbUrbNext;
822 RTListForEachSafe(&pDev->LstAsyncUrbs, pVUsbUrb, pVUsbUrbNext, VUSBURBVUSBINT, NdLst)
823 {
824 PVUSBURB pUrb = pVUsbUrb->pUrb;
825 /* Call the worker directly. */
826 vusbUrbCancelWorker(pUrb, CANCELMODE_FAIL);
827 }
828
829 return VINF_SUCCESS;
830}
831
832/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnCancelAllUrbs} */
833static DECLCALLBACK(void) vusbRhCancelAllUrbs(PVUSBIROOTHUBCONNECTOR pInterface)
834{
835 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
836
837 RTCritSectEnter(&pRh->CritSectDevices);
838 PVUSBDEV pDev = pRh->pDevices;
839 while (pDev)
840 {
841 vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhCancelAllUrbsWorker, 1, pDev);
842 pDev = pDev->pNext;
843 }
844 RTCritSectLeave(&pRh->CritSectDevices);
845}
846
847/**
848 * Worker doing the actual cancelling of all outstanding per-EP URBs on the
849 * device I/O thread.
850 *
851 * @returns VBox status code.
852 * @param pDev USB device instance data.
853 * @param EndPt Endpoint number.
854 * @param enmDir Endpoint direction.
855 */
856static DECLCALLBACK(int) vusbRhAbortEpWorker(PVUSBDEV pDev, int EndPt, VUSBDIRECTION enmDir)
857{
858 /*
859 * Iterate the URBs, find ones corresponding to given EP, and cancel them.
860 */
861 PVUSBURBVUSB pVUsbUrb, pVUsbUrbNext;
862 RTListForEachSafe(&pDev->LstAsyncUrbs, pVUsbUrb, pVUsbUrbNext, VUSBURBVUSBINT, NdLst)
863 {
864 PVUSBURB pUrb = pVUsbUrb->pUrb;
865
866 Assert(pUrb->pVUsb->pDev == pDev);
867
868 /* For the default control EP, direction does not matter. */
869 if (pUrb->EndPt == EndPt && (pUrb->enmDir == enmDir || !EndPt))
870 {
871 LogFlow(("%s: vusbRhAbortEpWorker: CANCELING URB\n", pUrb->pszDesc));
872 int rc = vusbUrbCancelWorker(pUrb, CANCELMODE_UNDO);
873 AssertRC(rc);
874 }
875 }
876
877 return VINF_SUCCESS;
878}
879
880
881/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnAbortEp} */
882static DECLCALLBACK(int) vusbRhAbortEp(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice, int EndPt, VUSBDIRECTION enmDir)
883{
884 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
885 if (&pRh->Hub != ((PVUSBDEV)pDevice)->pHub)
886 AssertFailedReturn(VERR_INVALID_PARAMETER);
887
888 RTCritSectEnter(&pRh->CritSectDevices);
889 PVUSBDEV pDev = (PVUSBDEV)pDevice;
890 vusbDevIoThreadExecSync(pDev, (PFNRT)vusbRhAbortEpWorker, 3, pDev, EndPt, enmDir);
891 RTCritSectLeave(&pRh->CritSectDevices);
892
893 /* The reaper thread will take care of completing the URB. */
894
895 return VINF_SUCCESS;
896}
897
898
899/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnAttachDevice} */
900static DECLCALLBACK(int) vusbRhAttachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
901{
902 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
903 return vusbHubAttach(&pRh->Hub, (PVUSBDEV)pDevice);
904}
905
906
907/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnDetachDevice} */
908static DECLCALLBACK(int) vusbRhDetachDevice(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice)
909{
910 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
911 if (&pRh->Hub != ((PVUSBDEV)pDevice)->pHub)
912 AssertFailedReturn(VERR_INVALID_PARAMETER);
913 return vusbDevDetach((PVUSBDEV)pDevice);
914}
915
916
917/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnSetPeriodicFrameProcessing} */
918static DECLCALLBACK(int) vusbRhSetFrameProcessing(PVUSBIROOTHUBCONNECTOR pInterface, uint32_t uFrameRate)
919{
920 int rc = VINF_SUCCESS;
921 PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
922
923 /* Create the frame thread lazily. */
924 if ( !pThis->hThreadPeriodFrame
925 && uFrameRate)
926 {
927 ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate);
928 pThis->uFrameRate = uFrameRate;
929 vusbRhR3CalcTimerIntervals(pThis, uFrameRate);
930
931 rc = RTSemEventMultiCreate(&pThis->hSemEventPeriodFrame);
932 AssertRCReturn(rc, rc);
933
934 rc = RTSemEventMultiCreate(&pThis->hSemEventPeriodFrameStopped);
935 AssertRCReturn(rc, rc);
936
937 rc = PDMDrvHlpThreadCreate(pThis->pDrvIns, &pThis->hThreadPeriodFrame, pThis, vusbRhR3PeriodFrameWorker,
938 vusbRhR3PeriodFrameWorkerWakeup, 0, RTTHREADTYPE_IO, "VUsbPeriodFrm");
939 AssertRCReturn(rc, rc);
940
941 VMSTATE enmState = PDMDrvHlpVMState(pThis->pDrvIns);
942 if ( enmState == VMSTATE_RUNNING
943 || enmState == VMSTATE_RUNNING_LS
944 || enmState == VMSTATE_RUNNING_FT)
945 {
946 rc = PDMR3ThreadResume(pThis->hThreadPeriodFrame);
947 AssertRCReturn(rc, rc);
948 }
949 }
950 else if ( pThis->hThreadPeriodFrame
951 && !uFrameRate)
952 {
953 /* Stop processing. */
954 uint32_t uFrameRateOld = ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate);
955 if (uFrameRateOld)
956 {
957 rc = RTSemEventMultiReset(pThis->hSemEventPeriodFrameStopped);
958 AssertRC(rc);
959
960 /* Signal the frame thread to stop. */
961 RTSemEventMultiSignal(pThis->hSemEventPeriodFrame);
962
963 /* Wait for signal from the thread that it stopped. */
964 rc = RTSemEventMultiWait(pThis->hSemEventPeriodFrameStopped, RT_INDEFINITE_WAIT);
965 AssertRC(rc);
966 }
967 }
968 else if ( pThis->hThreadPeriodFrame
969 && uFrameRate)
970 {
971 /* Just switch to the new frame rate and let the periodic frame thread pick it up. */
972 uint32_t uFrameRateOld = ASMAtomicXchgU32(&pThis->uFrameRateDefault, uFrameRate);
973
974 /* Signal the frame thread to continue if it was stopped. */
975 if (!uFrameRateOld)
976 RTSemEventMultiSignal(pThis->hSemEventPeriodFrame);
977 }
978
979 return rc;
980}
981
982
983/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnGetPeriodicFrameRate} */
984static DECLCALLBACK(uint32_t) vusbRhGetPeriodicFrameRate(PVUSBIROOTHUBCONNECTOR pInterface)
985{
986 PVUSBROOTHUB pThis = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
987
988 return pThis->uFrameRate;
989}
990
991/** @interface_method_impl{VUSBIROOTHUBCONNECTOR,pfnUpdateIsocFrameDelta} */
992static DECLCALLBACK(uint32_t) vusbRhUpdateIsocFrameDelta(PVUSBIROOTHUBCONNECTOR pInterface, PVUSBIDEVICE pDevice,
993 int EndPt, VUSBDIRECTION enmDir, uint16_t uNewFrameID, uint8_t uBits)
994{
995 PVUSBROOTHUB pRh = VUSBIROOTHUBCONNECTOR_2_VUSBROOTHUB(pInterface);
996 AssertReturn(pRh, 0);
997 PVUSBDEV pDev = (PVUSBDEV)pDevice;
998 PVUSBPIPE pPipe = &pDev->aPipes[EndPt];
999 uint32_t *puLastFrame;
1000 int32_t uFrameDelta;
1001 uint32_t uMaxVal = 1 << uBits;
1002
1003 puLastFrame = enmDir == VUSBDIRECTION_IN ? &pPipe->uLastFrameIn : &pPipe->uLastFrameOut;
1004 uFrameDelta = uNewFrameID - *puLastFrame;
1005 *puLastFrame = uNewFrameID;
1006 /* Take care of wrap-around. */
1007 if (uFrameDelta < 0)
1008 uFrameDelta += uMaxVal;
1009
1010 return (uint16_t)uFrameDelta;
1011}
1012
1013/* -=-=-=-=-=- VUSB Device methods (for the root hub) -=-=-=-=-=- */
1014
1015
1016/**
1017 * @interface_method_impl{VUSBIDEVICE,pfnReset}
1018 */
1019static DECLCALLBACK(int) vusbRhDevReset(PVUSBIDEVICE pInterface, bool fResetOnLinux,
1020 PFNVUSBRESETDONE pfnDone, void *pvUser, PVM pVM)
1021{
1022 RT_NOREF(pfnDone, pvUser, pVM);
1023 PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1024 Assert(!pfnDone);
1025 return pRh->pIRhPort->pfnReset(pRh->pIRhPort, fResetOnLinux); /** @todo change rc from bool to vbox status everywhere! */
1026}
1027
1028
1029/**
1030 * @interface_method_impl{VUSBIDEVICE,pfnPowerOn}
1031 */
1032static DECLCALLBACK(int) vusbRhDevPowerOn(PVUSBIDEVICE pInterface)
1033{
1034 PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1035 LogFlow(("vusbRhDevPowerOn: pRh=%p\n", pRh));
1036
1037 Assert( pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_DETACHED
1038 && pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_RESET);
1039
1040 if (pRh->Hub.Dev.enmState == VUSB_DEVICE_STATE_ATTACHED)
1041 pRh->Hub.Dev.enmState = VUSB_DEVICE_STATE_POWERED;
1042
1043 return VINF_SUCCESS;
1044}
1045
1046
1047/**
1048 * @interface_method_impl{VUSBIDEVICE,pfnPowerOff}
1049 */
1050static DECLCALLBACK(int) vusbRhDevPowerOff(PVUSBIDEVICE pInterface)
1051{
1052 PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1053 LogFlow(("vusbRhDevPowerOff: pRh=%p\n", pRh));
1054
1055 Assert( pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_DETACHED
1056 && pRh->Hub.Dev.enmState != VUSB_DEVICE_STATE_RESET);
1057
1058 /*
1059 * Cancel all URBs and reap them.
1060 */
1061 VUSBIRhCancelAllUrbs(&pRh->IRhConnector);
1062 RTCritSectEnter(&pRh->CritSectDevices);
1063 PVUSBDEV pDev = pRh->pDevices;
1064 while (pDev)
1065 {
1066 VUSBIRhReapAsyncUrbs(&pRh->IRhConnector, (PVUSBIDEVICE)pDev, 0);
1067 pDev = pDev->pNext;
1068 }
1069 RTCritSectLeave(&pRh->CritSectDevices);
1070
1071 pRh->Hub.Dev.enmState = VUSB_DEVICE_STATE_ATTACHED;
1072 return VINF_SUCCESS;
1073}
1074
1075/**
1076 * @interface_method_impl{VUSBIDEVICE,pfnGetState}
1077 */
1078static DECLCALLBACK(VUSBDEVICESTATE) vusbRhDevGetState(PVUSBIDEVICE pInterface)
1079{
1080 PVUSBROOTHUB pRh = RT_FROM_MEMBER(pInterface, VUSBROOTHUB, Hub.Dev.IDevice);
1081 return pRh->Hub.Dev.enmState;
1082}
1083
1084
1085static const char *vusbGetSpeedString(VUSBSPEED enmSpeed)
1086{
1087 const char *pszSpeed = NULL;
1088
1089 switch (enmSpeed)
1090 {
1091 case VUSB_SPEED_LOW:
1092 pszSpeed = "Low";
1093 break;
1094 case VUSB_SPEED_FULL:
1095 pszSpeed = "Full";
1096 break;
1097 case VUSB_SPEED_HIGH:
1098 pszSpeed = "High";
1099 break;
1100 case VUSB_SPEED_VARIABLE:
1101 pszSpeed = "Variable";
1102 break;
1103 case VUSB_SPEED_SUPER:
1104 pszSpeed = "Super";
1105 break;
1106 case VUSB_SPEED_SUPERPLUS:
1107 pszSpeed = "SuperPlus";
1108 break;
1109 default:
1110 pszSpeed = "Unknown";
1111 break;
1112 }
1113 return pszSpeed;
1114}
1115
1116/* -=-=-=-=-=- VUSB Hub methods -=-=-=-=-=- */
1117
1118
1119/**
1120 * Attach the device to the hub.
1121 * Port assignments and all such stuff is up to this routine.
1122 *
1123 * @returns VBox status code.
1124 * @param pHub Pointer to the hub.
1125 * @param pDev Pointer to the device.
1126 */
1127static int vusbRhHubOpAttach(PVUSBHUB pHub, PVUSBDEV pDev)
1128{
1129 PVUSBROOTHUB pRh = (PVUSBROOTHUB)pHub;
1130
1131 /*
1132 * Assign a port.
1133 */
1134 int iPort = ASMBitFirstSet(&pRh->Bitmap, sizeof(pRh->Bitmap) * 8);
1135 if (iPort < 0)
1136 {
1137 LogRel(("VUSB: No ports available!\n"));
1138 return VERR_VUSB_NO_PORTS;
1139 }
1140 ASMBitClear(&pRh->Bitmap, iPort);
1141 pHub->cDevices++;
1142 pDev->i16Port = iPort;
1143
1144 /*
1145 * Call the HCI attach routine and let it have its say before the device is
1146 * linked into the device list of this hub.
1147 */
1148 int rc = pRh->pIRhPort->pfnAttach(pRh->pIRhPort, &pDev->IDevice, iPort);
1149 if (RT_SUCCESS(rc))
1150 {
1151 RTCritSectEnter(&pRh->CritSectDevices);
1152 pDev->pNext = pRh->pDevices;
1153 pRh->pDevices = pDev;
1154 RTCritSectLeave(&pRh->CritSectDevices);
1155 LogRel(("VUSB: Attached '%s' to port %d on %s (%sSpeed)\n", pDev->pUsbIns->pszName,
1156 iPort, pHub->pszName, vusbGetSpeedString(pDev->pUsbIns->enmSpeed)));
1157 }
1158 else
1159 {
1160 ASMBitSet(&pRh->Bitmap, iPort);
1161 pHub->cDevices--;
1162 pDev->i16Port = -1;
1163 LogRel(("VUSB: Failed to attach '%s' to port %d, rc=%Rrc\n", pDev->pUsbIns->pszName, iPort, rc));
1164 }
1165 return rc;
1166}
1167
1168
1169/**
1170 * Detach the device from the hub.
1171 *
1172 * @returns VBox status code.
1173 * @param pHub Pointer to the hub.
1174 * @param pDev Pointer to the device.
1175 */
1176static void vusbRhHubOpDetach(PVUSBHUB pHub, PVUSBDEV pDev)
1177{
1178 PVUSBROOTHUB pRh = (PVUSBROOTHUB)pHub;
1179 Assert(pDev->i16Port != -1);
1180
1181 /*
1182 * Check that it's attached and unlink it from the linked list.
1183 */
1184 RTCritSectEnter(&pRh->CritSectDevices);
1185 if (pRh->pDevices != pDev)
1186 {
1187 PVUSBDEV pPrev = pRh->pDevices;
1188 while (pPrev && pPrev->pNext != pDev)
1189 pPrev = pPrev->pNext;
1190 Assert(pPrev);
1191 pPrev->pNext = pDev->pNext;
1192 }
1193 else
1194 pRh->pDevices = pDev->pNext;
1195 pDev->pNext = NULL;
1196 RTCritSectLeave(&pRh->CritSectDevices);
1197
1198 /*
1199 * Detach the device and mark the port as available.
1200 */
1201 unsigned uPort = pDev->i16Port;
1202 pRh->pIRhPort->pfnDetach(pRh->pIRhPort, &pDev->IDevice, uPort);
1203 LogRel(("VUSB: Detached '%s' from port %u on %s\n", pDev->pUsbIns->pszName, uPort, pHub->pszName));
1204 ASMBitSet(&pRh->Bitmap, uPort);
1205 pHub->cDevices--;
1206}
1207
1208
1209/**
1210 * The Hub methods implemented by the root hub.
1211 */
1212static const VUSBHUBOPS s_VUsbRhHubOps =
1213{
1214 vusbRhHubOpAttach,
1215 vusbRhHubOpDetach
1216};
1217
1218
1219
1220/* -=-=-=-=-=- PDM Base interface methods -=-=-=-=-=- */
1221
1222
1223/**
1224 * @interface_method_impl{PDMIBASE,pfnQueryInterface}
1225 */
1226static DECLCALLBACK(void *) vusbRhQueryInterface(PPDMIBASE pInterface, const char *pszIID)
1227{
1228 PPDMDRVINS pDrvIns = PDMIBASE_2_PDMDRV(pInterface);
1229 PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
1230
1231 PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pDrvIns->IBase);
1232 PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIROOTHUBCONNECTOR, &pRh->IRhConnector);
1233 PDMIBASE_RETURN_INTERFACE(pszIID, VUSBIDEVICE, &pRh->Hub.Dev.IDevice);
1234 return NULL;
1235}
1236
1237
1238/* -=-=-=-=-=- PDM Driver methods -=-=-=-=-=- */
1239
1240
1241/**
1242 * Destruct a driver instance.
1243 *
1244 * Most VM resources are freed by the VM. This callback is provided so that any non-VM
1245 * resources can be freed correctly.
1246 *
1247 * @param pDrvIns The driver instance data.
1248 */
1249static DECLCALLBACK(void) vusbRhDestruct(PPDMDRVINS pDrvIns)
1250{
1251 PVUSBROOTHUB pRh = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
1252 PDMDRV_CHECK_VERSIONS_RETURN_VOID(pDrvIns);
1253
1254 vusbUrbPoolDestroy(&pRh->Hub.Dev.UrbPool);
1255 if (pRh->Hub.pszName)
1256 {
1257 RTStrFree(pRh->Hub.pszName);
1258 pRh->Hub.pszName = NULL;
1259 }
1260 if (pRh->hSniffer != VUSBSNIFFER_NIL)
1261 VUSBSnifferDestroy(pRh->hSniffer);
1262
1263 if (pRh->hSemEventPeriodFrame)
1264 RTSemEventMultiDestroy(pRh->hSemEventPeriodFrame);
1265
1266 if (pRh->hSemEventPeriodFrameStopped)
1267 RTSemEventMultiDestroy(pRh->hSemEventPeriodFrameStopped);
1268
1269 RTCritSectDelete(&pRh->CritSectDevices);
1270}
1271
1272
1273/**
1274 * Construct a root hub driver instance.
1275 *
1276 * @copydoc FNPDMDRVCONSTRUCT
1277 */
1278static DECLCALLBACK(int) vusbRhConstruct(PPDMDRVINS pDrvIns, PCFGMNODE pCfg, uint32_t fFlags)
1279{
1280 RT_NOREF(fFlags);
1281 PDMDRV_CHECK_VERSIONS_RETURN(pDrvIns);
1282 LogFlow(("vusbRhConstruct: Instance %d\n", pDrvIns->iInstance));
1283 PVUSBROOTHUB pThis = PDMINS_2_DATA(pDrvIns, PVUSBROOTHUB);
1284
1285 /*
1286 * Validate configuration.
1287 */
1288 if (!CFGMR3AreValuesValid(pCfg, "CaptureFilename\0"))
1289 return VERR_PDM_DRVINS_UNKNOWN_CFG_VALUES;
1290
1291 /*
1292 * Check that there are no drivers below us.
1293 */
1294 AssertMsgReturn(PDMDrvHlpNoAttach(pDrvIns) == VERR_PDM_NO_ATTACHED_DRIVER,
1295 ("Configuration error: Not possible to attach anything to this driver!\n"),
1296 VERR_PDM_DRVINS_NO_ATTACH);
1297
1298 /*
1299 * Initialize the critical sections.
1300 */
1301 int rc = RTCritSectInit(&pThis->CritSectDevices);
1302 if (RT_FAILURE(rc))
1303 return rc;
1304
1305 char *pszCaptureFilename = NULL;
1306 rc = CFGMR3QueryStringAlloc(pCfg, "CaptureFilename", &pszCaptureFilename);
1307 if ( RT_FAILURE(rc)
1308 && rc != VERR_CFGM_VALUE_NOT_FOUND)
1309 return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS,
1310 N_("Configuration error: Failed to query value of \"CaptureFilename\""));
1311
1312 /*
1313 * Initialize the data members.
1314 */
1315 pDrvIns->IBase.pfnQueryInterface = vusbRhQueryInterface;
1316 /* the usb device */
1317 pThis->Hub.Dev.enmState = VUSB_DEVICE_STATE_ATTACHED;
1318 pThis->Hub.Dev.u8Address = VUSB_INVALID_ADDRESS;
1319 pThis->Hub.Dev.u8NewAddress = VUSB_INVALID_ADDRESS;
1320 pThis->Hub.Dev.i16Port = -1;
1321 pThis->Hub.Dev.cRefs = 1;
1322 pThis->Hub.Dev.IDevice.pfnReset = vusbRhDevReset;
1323 pThis->Hub.Dev.IDevice.pfnPowerOn = vusbRhDevPowerOn;
1324 pThis->Hub.Dev.IDevice.pfnPowerOff = vusbRhDevPowerOff;
1325 pThis->Hub.Dev.IDevice.pfnGetState = vusbRhDevGetState;
1326 /* the hub */
1327 pThis->Hub.pOps = &s_VUsbRhHubOps;
1328 pThis->Hub.pRootHub = pThis;
1329 //pThis->hub.cPorts - later
1330 pThis->Hub.cDevices = 0;
1331 pThis->Hub.Dev.pHub = &pThis->Hub;
1332 RTStrAPrintf(&pThis->Hub.pszName, "RootHub#%d", pDrvIns->iInstance);
1333 /* misc */
1334 pThis->pDrvIns = pDrvIns;
1335 /* the connector */
1336 pThis->IRhConnector.pfnSetUrbParams = vusbRhSetUrbParams;
1337 pThis->IRhConnector.pfnNewUrb = vusbRhConnNewUrb;
1338 pThis->IRhConnector.pfnFreeUrb = vusbRhConnFreeUrb;
1339 pThis->IRhConnector.pfnSubmitUrb = vusbRhSubmitUrb;
1340 pThis->IRhConnector.pfnReapAsyncUrbs = vusbRhReapAsyncUrbs;
1341 pThis->IRhConnector.pfnCancelUrbsEp = vusbRhCancelUrbsEp;
1342 pThis->IRhConnector.pfnCancelAllUrbs = vusbRhCancelAllUrbs;
1343 pThis->IRhConnector.pfnAbortEp = vusbRhAbortEp;
1344 pThis->IRhConnector.pfnAttachDevice = vusbRhAttachDevice;
1345 pThis->IRhConnector.pfnDetachDevice = vusbRhDetachDevice;
1346 pThis->IRhConnector.pfnSetPeriodicFrameProcessing = vusbRhSetFrameProcessing;
1347 pThis->IRhConnector.pfnGetPeriodicFrameRate = vusbRhGetPeriodicFrameRate;
1348 pThis->IRhConnector.pfnUpdateIsocFrameDelta = vusbRhUpdateIsocFrameDelta;
1349 pThis->hSniffer = VUSBSNIFFER_NIL;
1350 pThis->cbHci = 0;
1351 pThis->cbHciTd = 0;
1352 pThis->fFrameProcessing = false;
1353#ifdef LOG_ENABLED
1354 pThis->iSerial = 0;
1355#endif
1356 /*
1357 * Resolve interface(s).
1358 */
1359 pThis->pIRhPort = PDMIBASE_QUERY_INTERFACE(pDrvIns->pUpBase, VUSBIROOTHUBPORT);
1360 AssertMsgReturn(pThis->pIRhPort, ("Configuration error: the device/driver above us doesn't expose any VUSBIROOTHUBPORT interface!\n"), VERR_PDM_MISSING_INTERFACE_ABOVE);
1361
1362 /*
1363 * Get number of ports and the availability bitmap.
1364 * ASSUME that the number of ports reported now at creation time is the max number.
1365 */
1366 pThis->Hub.cPorts = pThis->pIRhPort->pfnGetAvailablePorts(pThis->pIRhPort, &pThis->Bitmap);
1367 Log(("vusbRhConstruct: cPorts=%d\n", pThis->Hub.cPorts));
1368
1369 /*
1370 * Get the USB version of the attached HC.
1371 * ASSUME that version 2.0 implies high-speed.
1372 */
1373 pThis->fHcVersions = pThis->pIRhPort->pfnGetUSBVersions(pThis->pIRhPort);
1374 Log(("vusbRhConstruct: fHcVersions=%u\n", pThis->fHcVersions));
1375
1376 rc = vusbUrbPoolInit(&pThis->Hub.Dev.UrbPool);
1377 if (RT_FAILURE(rc))
1378 return rc;
1379
1380 if (pszCaptureFilename)
1381 {
1382 rc = VUSBSnifferCreate(&pThis->hSniffer, 0, pszCaptureFilename, NULL, NULL);
1383 if (RT_FAILURE(rc))
1384 return PDMDrvHlpVMSetError(pDrvIns, rc, RT_SRC_POS,
1385 N_("VUSBSniffer cannot open '%s' for writing. The directory must exist and it must be writable for the current user"),
1386 pszCaptureFilename);
1387
1388 MMR3HeapFree(pszCaptureFilename);
1389 }
1390
1391 /*
1392 * Register ourselves as a USB hub.
1393 * The current implementation uses the VUSBIRHCONFIG interface for communication.
1394 */
1395 PCPDMUSBHUBHLP pHlp; /* not used currently */
1396 rc = PDMDrvHlpUSBRegisterHub(pDrvIns, pThis->fHcVersions, pThis->Hub.cPorts, &g_vusbHubReg, &pHlp);
1397 if (RT_FAILURE(rc))
1398 return rc;
1399
1400 /*
1401 * Statistics. (It requires a 30" monitor or extremely tiny fonts to edit this "table".)
1402 */
1403#ifdef VBOX_WITH_STATISTICS
1404 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs submitted.", "/VUSB/%d/UrbsSubmitted", pDrvIns->iInstance);
1405 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsSubmitted/Bulk", pDrvIns->iInstance);
1406 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsSubmitted/Ctrl", pDrvIns->iInstance);
1407 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsSubmitted/Intr", pDrvIns->iInstance);
1408 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsSubmitted/Isoc", pDrvIns->iInstance);
1409
1410 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs cancelled. (included in failed)", "/VUSB/%d/UrbsCancelled", pDrvIns->iInstance);
1411 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsCancelled/Bulk", pDrvIns->iInstance);
1412 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsCancelled/Ctrl", pDrvIns->iInstance);
1413 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsCancelled/Intr", pDrvIns->iInstance);
1414 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsCancelled/Isoc", pDrvIns->iInstance);
1415
1416 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs failing.", "/VUSB/%d/UrbsFailed", pDrvIns->iInstance);
1417 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Bulk transfer.", "/VUSB/%d/UrbsFailed/Bulk", pDrvIns->iInstance);
1418 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Control transfer.", "/VUSB/%d/UrbsFailed/Ctrl", pDrvIns->iInstance);
1419 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Interrupt transfer.", "/VUSB/%d/UrbsFailed/Intr", pDrvIns->iInstance);
1420 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Isochronous transfer.", "/VUSB/%d/UrbsFailed/Isoc", pDrvIns->iInstance);
1421
1422 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested transfer.", "/VUSB/%d/ReqBytes", pDrvIns->iInstance);
1423 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqBytes/Bulk", pDrvIns->iInstance);
1424 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqBytes/Ctrl", pDrvIns->iInstance);
1425 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqBytes/Intr", pDrvIns->iInstance);
1426 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqBytes/Isoc", pDrvIns->iInstance);
1427
1428 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested read transfer.", "/VUSB/%d/ReqReadBytes", pDrvIns->iInstance);
1429 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqReadBytes/Bulk", pDrvIns->iInstance);
1430 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqReadBytes/Ctrl", pDrvIns->iInstance);
1431 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqReadBytes/Intr", pDrvIns->iInstance);
1432 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqReadBytes/Isoc", pDrvIns->iInstance);
1433
1434 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Total requested write transfer.", "/VUSB/%d/ReqWriteBytes", pDrvIns->iInstance);
1435 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ReqWriteBytes/Bulk", pDrvIns->iInstance);
1436 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ReqWriteBytes/Ctrl", pDrvIns->iInstance);
1437 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ReqWriteBytes/Intr", pDrvIns->iInstance);
1438 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ReqWriteBytes/Isoc", pDrvIns->iInstance);
1439
1440 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total transfer.", "/VUSB/%d/ActBytes", pDrvIns->iInstance);
1441 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActBytes/Bulk", pDrvIns->iInstance);
1442 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActBytes/Ctrl", pDrvIns->iInstance);
1443 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActBytes/Intr", pDrvIns->iInstance);
1444 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActBytes/Isoc", pDrvIns->iInstance);
1445
1446 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total read transfer.", "/VUSB/%d/ActReadBytes", pDrvIns->iInstance);
1447 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActReadBytes/Bulk", pDrvIns->iInstance);
1448 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActReadBytes/Ctrl", pDrvIns->iInstance);
1449 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActReadBytes/Intr", pDrvIns->iInstance);
1450 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActReadBytes/Isoc", pDrvIns->iInstance);
1451
1452 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->Total.StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Actual total write transfer.", "/VUSB/%d/ActWriteBytes", pDrvIns->iInstance);
1453 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Bulk transfer.", "/VUSB/%d/ActWriteBytes/Bulk", pDrvIns->iInstance);
1454 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Control transfer.", "/VUSB/%d/ActWriteBytes/Ctrl", pDrvIns->iInstance);
1455 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Interrupt transfer.", "/VUSB/%d/ActWriteBytes/Intr", pDrvIns->iInstance);
1456 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Isochronous transfer.", "/VUSB/%d/ActWriteBytes/Isoc", pDrvIns->iInstance);
1457
1458 /* bulk */
1459 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Bulk/Urbs", pDrvIns->iInstance);
1460 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Bulk/UrbsFailed", pDrvIns->iInstance);
1461 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Bulk/UrbsFailed/Cancelled", pDrvIns->iInstance);
1462 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Bulk/ActBytes", pDrvIns->iInstance);
1463 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ActBytes/Read", pDrvIns->iInstance);
1464 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ActBytes/Write", pDrvIns->iInstance);
1465 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Bulk/ReqBytes", pDrvIns->iInstance);
1466 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Bulk/ReqBytes/Read", pDrvIns->iInstance);
1467 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_BULK].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Bulk/ReqBytes/Write", pDrvIns->iInstance);
1468
1469 /* control */
1470 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Ctrl/Urbs", pDrvIns->iInstance);
1471 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Ctrl/UrbsFailed", pDrvIns->iInstance);
1472 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Ctrl/UrbsFailed/Cancelled", pDrvIns->iInstance);
1473 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Ctrl/ActBytes", pDrvIns->iInstance);
1474 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ActBytes/Read", pDrvIns->iInstance);
1475 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ActBytes/Write", pDrvIns->iInstance);
1476 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Ctrl/ReqBytes", pDrvIns->iInstance);
1477 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Ctrl/ReqBytes/Read", pDrvIns->iInstance);
1478 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_CTRL].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Ctrl/ReqBytes/Write", pDrvIns->iInstance);
1479
1480 /* interrupt */
1481 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Intr/Urbs", pDrvIns->iInstance);
1482 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Intr/UrbsFailed", pDrvIns->iInstance);
1483 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Intr/UrbsFailed/Cancelled", pDrvIns->iInstance);
1484 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Intr/ActBytes", pDrvIns->iInstance);
1485 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ActBytes/Read", pDrvIns->iInstance);
1486 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ActBytes/Write", pDrvIns->iInstance);
1487 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Intr/ReqBytes", pDrvIns->iInstance);
1488 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Intr/ReqBytes/Read", pDrvIns->iInstance);
1489 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_INTR].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Intr/ReqBytes/Write", pDrvIns->iInstance);
1490
1491 /* isochronous */
1492 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsSubmitted, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of submitted URBs.", "/VUSB/%d/Isoc/Urbs", pDrvIns->iInstance);
1493 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsFailed, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of failed URBs.", "/VUSB/%d/Isoc/UrbsFailed", pDrvIns->iInstance);
1494 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatUrbsCancelled, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of cancelled URBs.", "/VUSB/%d/Isoc/UrbsFailed/Cancelled", pDrvIns->iInstance);
1495 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Number of bytes transferred.", "/VUSB/%d/Isoc/ActBytes", pDrvIns->iInstance);
1496 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ActBytes/Read", pDrvIns->iInstance);
1497 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatActWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ActBytes/Write", pDrvIns->iInstance);
1498 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Requested number of bytes.", "/VUSB/%d/Isoc/ReqBytes", pDrvIns->iInstance);
1499 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqReadBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Read.", "/VUSB/%d/Isoc/ReqBytes/Read", pDrvIns->iInstance);
1500 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aTypes[VUSBXFERTYPE_ISOC].StatReqWriteBytes, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_BYTES, "Write.", "/VUSB/%d/Isoc/ReqBytes/Write", pDrvIns->iInstance);
1501 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Number of isochronous packets returning data.", "/VUSB/%d/Isoc/ActPkts", pDrvIns->iInstance);
1502 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ActPkts/Read", pDrvIns->iInstance);
1503 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocActWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ActPkts/Write", pDrvIns->iInstance);
1504 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Requested number of isochronous packets.", "/VUSB/%d/Isoc/ReqPkts", pDrvIns->iInstance);
1505 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqReadPkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Read.", "/VUSB/%d/Isoc/ReqPkts/Read", pDrvIns->iInstance);
1506 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatIsocReqWritePkts, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "Write.", "/VUSB/%d/Isoc/ReqPkts/Write", pDrvIns->iInstance);
1507
1508 for (unsigned i = 0; i < RT_ELEMENTS(pThis->aStatIsocDetails); i++)
1509 {
1510 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Pkts, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d", pDrvIns->iInstance, i);
1511 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok", pDrvIns->iInstance, i);
1512 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Ok0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Ok0", pDrvIns->iInstance, i);
1513 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun", pDrvIns->iInstance, i);
1514 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataUnderrun0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataUnderrun0", pDrvIns->iInstance, i);
1515 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].DataOverrun, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/DataOverrun", pDrvIns->iInstance, i);
1516 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].NotAccessed, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/NotAccessed", pDrvIns->iInstance, i);
1517 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Misc, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_COUNT, ".", "/VUSB/%d/Isoc/%d/Misc", pDrvIns->iInstance, i);
1518 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->aStatIsocDetails[i].Bytes, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_BYTES, ".", "/VUSB/%d/Isoc/%d/Bytes", pDrvIns->iInstance, i);
1519 }
1520
1521 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatReapAsyncUrbs, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Profiling the vusbRhReapAsyncUrbs body (omitting calls when nothing is in-flight).", "/VUSB/%d/ReapAsyncUrbs", pDrvIns->iInstance);
1522 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatSubmitUrb, STAMTYPE_PROFILE, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Profiling the vusbRhSubmitUrb body.", "/VUSB/%d/SubmitUrb", pDrvIns->iInstance);
1523 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatFramesProcessedThread, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Processed frames in the dedicated thread", "/VUSB/%d/FramesProcessedThread", pDrvIns->iInstance);
1524 PDMDrvHlpSTAMRegisterF(pDrvIns, &pThis->StatFramesProcessedClbk, STAMTYPE_COUNTER, STAMVISIBILITY_ALWAYS, STAMUNIT_OCCURENCES, "Processed frames in the URB completion callback", "/VUSB/%d/FramesProcessedClbk", pDrvIns->iInstance);
1525#endif
1526 PDMDrvHlpSTAMRegisterF(pDrvIns, (void *)&pThis->Hub.Dev.UrbPool.cUrbsInPool, STAMTYPE_U32, STAMVISIBILITY_ALWAYS, STAMUNIT_COUNT, "The number of URBs in the pool.", "/VUSB/%d/cUrbsInPool", pDrvIns->iInstance);
1527
1528 return VINF_SUCCESS;
1529}
1530
1531
1532/**
1533 * VUSB Root Hub driver registration record.
1534 */
1535const PDMDRVREG g_DrvVUSBRootHub =
1536{
1537 /* u32Version */
1538 PDM_DRVREG_VERSION,
1539 /* szName */
1540 "VUSBRootHub",
1541 /* szRCMod */
1542 "",
1543 /* szR0Mod */
1544 "",
1545 /* pszDescription */
1546 "VUSB Root Hub Driver.",
1547 /* fFlags */
1548 PDM_DRVREG_FLAGS_HOST_BITS_DEFAULT,
1549 /* fClass. */
1550 PDM_DRVREG_CLASS_USB,
1551 /* cMaxInstances */
1552 ~0U,
1553 /* cbInstance */
1554 sizeof(VUSBROOTHUB),
1555 /* pfnConstruct */
1556 vusbRhConstruct,
1557 /* pfnDestruct */
1558 vusbRhDestruct,
1559 /* pfnRelocate */
1560 NULL,
1561 /* pfnIOCtl */
1562 NULL,
1563 /* pfnPowerOn */
1564 NULL,
1565 /* pfnReset */
1566 NULL,
1567 /* pfnSuspend */
1568 NULL,
1569 /* pfnResume */
1570 NULL,
1571 /* pfnAttach */
1572 NULL,
1573 /* pfnDetach */
1574 NULL,
1575 /* pfnPowerOff */
1576 NULL,
1577 /* pfnSoftReset */
1578 NULL,
1579 /* u32EndVersion */
1580 PDM_DRVREG_VERSION
1581};
1582
1583/*
1584 * Local Variables:
1585 * mode: c
1586 * c-file-style: "bsd"
1587 * c-basic-offset: 4
1588 * tab-width: 4
1589 * indent-tabs-mode: s
1590 * End:
1591 */
1592
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette