BusMouse.cpp@ 61888

Last change on this file since 61888 was 58170, checked in by vboxsync, 9 years ago
doxygen: fixes.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 29.5 KB

Line
1	/* $Id: BusMouse.cpp 58170 2015-10-12 09:27:14Z vboxsync $ */
2	/** @file
3	* BusMouse - Microsoft Bus (parallel) mouse controller device.
4	*/
5
6	/*
7	* Copyright (C) 2006-2015 Oracle Corporation
8	*
9	* Permission is hereby granted, free of charge, to any person
10	* obtaining a copy of this software and associated documentation
11	* files (the "Software"), to deal in the Software without
12	* restriction, including without limitation the rights to use,
13	* copy, modify, merge, publish, distribute, sublicense, and/or sell
14	* copies of the Software, and to permit persons to whom the
15	* Software is furnished to do so, subject to the following
16	* conditions:
17	*
18	* The above copyright notice and this permission notice shall be
19	* included in all copies or substantial portions of the Software.
20	*
21	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
22	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
23	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
24	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
25	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
26	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
27	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
28	* OTHER DEALINGS IN THE SOFTWARE.
29	*/
30
31
32	/*********************************************************************************************************************************
33	* Header Files *
34	*********************************************************************************************************************************/
35	#define LOG_GROUP LOG_GROUP_DEV_KBD
36	#include <VBox/vmm/pdmdev.h>
37	#include <VBox/version.h>
38	#include <iprt/assert.h>
39	#include <iprt/uuid.h>
40
41	/** @page pg_busmouse DevBusMouse - Microsoft Bus Mouse Emulation
42	*
43	* The Microsoft Bus Mouse was an early mouse sold by Microsoft, originally
44	* introduced in 1983. The mouse had a D-shaped 9-pin connector which plugged
45	* into a small ISA add-in board.
46	*
47	* The mouse itself was very simple (compared to a serial mouse) and most of the
48	* logic was located on the ISA board. Later, Microsoft sold an InPort mouse,
49	* which was also called a "bus mouse", but used a different interface.
50	*
51	* Microsoft part numbers for the Bus Mouse were 037-099 (100 ppi)
52	* and 037-199 (200 ppi).
53	*
54	* The Bus Mouse adapter included IRQ configuration jumpers (ref. MS article
55	* Q12230). The IRQ could be set to one of 2, 3, 4, 5. The typical setting
56	* would be IRQ 2 for a PC/XT and IRQ 5 for an AT compatible. Because IRQ 5
57	* may conflict with a SoundBlaster or a PCI device, this device defaults to
58	* IRQ 3. Note that IRQ 3 is also used by the COM 2 device, not often needed.
59	*
60	* The ISA adapter was built around an Intel 8255A compatible chip (ref.
61	* MS article Q46369). Once enabled, the adapter raises the configured IRQ
62	* 30 times per second; the rate is not configurable. The interrupts
63	* occur regardless of whether the mouse state has changed or not.
64	*
65	* To function properly, the 8255A must be programmed as follows:
66	* - Port A: Input. Used to read motion deltas and button states.
67	* - Port B: Output. Not used except for mouse detection.
68	* - Port C: Split. Upper bits set as output, used for control purposes.
69	* Lower bits set as input, reflecting IRQ state.
70	*
71	* Detailed information was gleaned from Windows and OS/2 DDK mouse samples.
72	*/
73
74
75	/*********************************************************************************************************************************
76	* Defined Constants And Macros *
77	*********************************************************************************************************************************/
78	/** The original bus mouse controller is fixed at I/O port 0x23C. */
79	#define BMS_IO_BASE 0x23C
80	#define BMS_IO_SIZE 4
81
82	/** @name Offsets relative to the I/O base.
83	@{ /
84	#define BMS_PORT_DATA 0 /*< 8255 Port A. /
85	#define BMS_PORT_SIG 1 /*< 8255 Port B. /
86	#define BMS_PORT_CTRL 2 /*< 8255 Port C. /
87	#define BMS_PORT_INIT 3 /*< 8255 Control Port. /
88	/** @} */
89
90	/** @name Port C bits (control port).
91	* @{ */
92	#define BMS_CTL_INT_DIS RT_BIT(4) /*< Disable IRQ (else enabled). /
93	#define BMS_CTL_SEL_HIGH RT_BIT(5) /*< Select hi nibble (else lo). /
94	#define BMS_CTL_SEL_Y RT_BIT(6) /*< Select X to read (else Y). /
95	#define BMS_CTL_HOLD RT_BIT(7) /*< Hold counter (else clear). /
96	/** @} */
97
98	/** @name Port A bits (data port).
99	* @{ */
100	#define BMS_DATA_DELTA 0x0F /*< Motion delta in lower nibble. /
101	#define BMS_DATA_B3_UP RT_BIT(5) /*< Button 3 (right) is up. /
102	#define BMS_DATA_B2_UP RT_BIT(6) /*< Button 2 (middle) is up. /
103	#define BMS_DATA_B1_UP RT_BIT(7) /*< Button 1 (left) is up. /
104	/** @} */
105
106	/** Convert IRQ level (2/3/4/5) to a bit in the control register. */
107	#define BMS_IRQ_BIT(a) (1 << (5 - a))
108
109	/** IRQ period, corresponds to approx. 30 Hz. */
110	#define BMS_IRQ_PERIOD_MS 34
111
112	/** Default IRQ setting. */
113	#define BMS_DEFAULT_IRQ 3
114
115	/** The saved state version. */
116	#define BMS_SAVED_STATE_VERSION 1
117
118
119	/*********************************************************************************************************************************
120	* Structures and Typedefs *
121	*********************************************************************************************************************************/
122	/**
123	* The device state.
124	*/
125	typedef struct MouState
126	{
127	/** @name 8255A state
128	* @{ */
129	uint8_t port_a;
130	uint8_t port_b;
131	uint8_t port_c;
132	uint8_t ctrl_port;
133	uint8_t cnt_held; /*< Counters held for reading. /
134	uint8_t held_dx;
135	uint8_t held_dy;
136	uint8_t irq; /*< The "jumpered" IRQ level. /
137	int32_t irq_toggle_counter;
138	/** Mouse timer handle - HC. */
139	PTMTIMERR3 MouseTimer;
140	/** Timer period in milliseconds. */
141	uint32_t cTimerPeriodMs;
142	/** @} */
143
144	/** @name mouse state
145	* @{ */
146	int32_t disable_counter;
147	uint8_t mouse_enabled;
148	int32_t mouse_dx; /* current values, needed for 'poll' mode */
149	int32_t mouse_dy;
150	uint8_t mouse_buttons;
151	uint8_t mouse_buttons_reported;
152	/** @} */
153
154	/** Pointer to the device instance - RC. */
155	PPDMDEVINSRC pDevInsRC;
156	/** Pointer to the device instance - R3 . */
157	PPDMDEVINSR3 pDevInsR3;
158	/** Pointer to the device instance. */
159	PPDMDEVINSR0 pDevInsR0;
160
161	/**
162	* Mouse port - LUN#0.
163	*
164	* @implements PDMIBASE
165	* @implements PDMIMOUSEPORT
166	*/
167	struct
168	{
169	/** The base interface for the mouse port. */
170	PDMIBASE IBase;
171	/** The mouse port base interface. */
172	PDMIMOUSEPORT IPort;
173
174	/** The base interface of the attached mouse driver. */
175	R3PTRTYPE(PPDMIBASE) pDrvBase;
176	/** The mouse interface of the attached mouse driver. */
177	R3PTRTYPE(PPDMIMOUSECONNECTOR) pDrv;
178	} Mouse;
179	} MouState;
180
181
182
183	#ifndef VBOX_DEVICE_STRUCT_TESTCASE
184
185	# ifdef IN_RING3
186
187	/**
188	* Report a change in status down the driver chain.
189	*
190	* We want to report the mouse as enabled if and only if the guest is "using"
191	* it. That way, other devices (e.g. a PS/2 or USB mouse) can receive mouse
192	* events when the bus mouse is disabled. Enabling interrupts constitutes
193	* enabling the bus mouse. The mouse is considered disabled if interrupts are
194	* disabled for several consecutive mouse timer ticks; this is because the
195	* interrupt handler in the guest typically temporarily disables interrupts and
196	* we do not want to toggle the enabled/disabled state more often than
197	* necessary.
198	*/
199	static void bms_update_downstream_status(MouState *pThis)
200	{
201	PPDMIMOUSECONNECTOR pDrv = pThis->Mouse.pDrv;
202	bool fEnabled = !!pThis->mouse_enabled;
203	pDrv->pfnReportModes(pDrv, fEnabled, false, false);
204	}
205
206	/**
207	* Set the emulated hardware to a known initial state.
208	*/
209	static void bms_reset(MouState *pThis)
210	{
211	/* Clear the device setup. */
212	pThis->port_a = pThis->port_b = 0;
213	pThis->port_c = BMS_CTL_INT_DIS; /* Interrupts disabled. */
214	pThis->ctrl_port = 0x91; /* Default 8255A setup. */
215
216	/* Clear motion/button state. */
217	pThis->cnt_held = false;
218	pThis->mouse_dx = pThis->mouse_dy = 0;
219	pThis->mouse_buttons = 0;
220	pThis->mouse_buttons_reported = 0;
221	pThis->disable_counter = 0;
222	pThis->irq_toggle_counter = 1000;
223
224	if (pThis->mouse_enabled)
225	{
226	pThis->mouse_enabled = false;
227	bms_update_downstream_status(pThis);
228	}
229	}
230
231	/* Process a mouse event coming from the host. */
232	static void bms_mouse_event(MouState *pThis, int dx, int dy, int dz, int dw,
233	int buttons_state)
234	{
235	LogRel3(("%s: dx=%d, dy=%d, dz=%d, dw=%d, buttons_state=0x%x\n",
236	__PRETTY_FUNCTION__, dx, dy, dz, dw, buttons_state));
237
238	/* Only record X/Y movement and buttons. */
239	pThis->mouse_dx += dx;
240	pThis->mouse_dy += dy;
241	pThis->mouse_buttons = buttons_state;
242	}
243
244	static DECLCALLBACK(void) bmsTimerCallback(PPDMDEVINS pDevIns, PTMTIMER pTimer, void *pvUser)
245	{
246	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
247	uint8_t irq_bit;
248
249	/* Toggle the IRQ line if interrupts are enabled. */
250	irq_bit = BMS_IRQ_BIT(pThis->irq);
251
252	if (pThis->port_c & irq_bit)
253	{
254	if (!(pThis->port_c & BMS_CTL_INT_DIS))
255	PDMDevHlpISASetIrq(pThis->CTX_SUFF(pDevIns), pThis->irq, PDM_IRQ_LEVEL_LOW);
256	pThis->port_c &= ~irq_bit;
257	}
258	else
259	{
260	pThis->port_c \|= irq_bit;
261	if (!(pThis->port_c & BMS_CTL_INT_DIS))
262	PDMDevHlpISASetIrq(pThis->CTX_SUFF(pDevIns), pThis->irq, PDM_IRQ_LEVEL_HIGH);
263	}
264
265	/* Handle enabling/disabling of the mouse interface. */
266	if (pThis->port_c & BMS_CTL_INT_DIS)
267	{
268	if (pThis->disable_counter)
269	--pThis->disable_counter;
270
271	if (pThis->disable_counter == 0 && pThis->mouse_enabled)
272	{
273	pThis->mouse_enabled = false;
274	bms_update_downstream_status(pThis);
275	}
276	}
277	else
278	{
279	pThis->disable_counter = 8; /* Re-arm the disable countdown. */
280	if (!pThis->mouse_enabled)
281	{
282	pThis->mouse_enabled = true;
283	bms_update_downstream_status(pThis);
284	}
285	}
286
287	/* Re-arm the timer. */
288	TMTimerSetMillies(pTimer, pThis->cTimerPeriodMs);
289	}
290
291	# endif /* IN_RING3 */
292
293	static void bms_set_reported_buttons(MouState *pThis, unsigned fButtons, unsigned fButtonMask)
294	{
295	pThis->mouse_buttons_reported \|= (fButtons & fButtonMask);
296	pThis->mouse_buttons_reported &= (fButtons \| ~fButtonMask);
297	}
298
299	/* Update the internal state after a write to port C. */
300	static void bms_update_ctrl(MouState *pThis)
301	{
302	int32_t dx, dy;
303
304	/* If the controller is in hold state, transfer data from counters. */
305	if (pThis->port_c & BMS_CTL_HOLD)
306	{
307	if (!pThis->cnt_held)
308	{
309	pThis->cnt_held = true;
310	dx = pThis->mouse_dx < 0 ? RT_MAX(pThis->mouse_dx, -128)
311	: RT_MIN(pThis->mouse_dx, 127);
312	dy = pThis->mouse_dy < 0 ? RT_MAX(pThis->mouse_dy, -128)
313	: RT_MIN(pThis->mouse_dy, 127);
314	pThis->mouse_dx -= dx;
315	pThis->mouse_dy -= dy;
316	bms_set_reported_buttons(pThis, pThis->mouse_buttons & 0x07, 0x07);
317
318	/* Force type conversion. */
319	pThis->held_dx = dx;
320	pThis->held_dy = dy;
321	}
322	}
323	else
324	pThis->cnt_held = false;
325
326	/* Move the appropriate nibble into port A. */
327	if (pThis->cnt_held)
328	{
329	if (pThis->port_c & BMS_CTL_SEL_Y)
330	{
331	if (pThis->port_c & BMS_CTL_SEL_HIGH)
332	pThis->port_a = pThis->held_dy >> 4;
333	else
334	pThis->port_a = pThis->held_dy & 0xF;
335	}
336	else
337	{
338	if (pThis->port_c & BMS_CTL_SEL_HIGH)
339	pThis->port_a = pThis->held_dx >> 4;
340	else
341	pThis->port_a = pThis->held_dx & 0xF;
342	}
343	/* And update the button bits. */
344	pThis->port_a \|= pThis->mouse_buttons & 1 ? 0 : BMS_DATA_B1_UP;
345	pThis->port_a \|= pThis->mouse_buttons & 2 ? 0 : BMS_DATA_B3_UP;
346	pThis->port_a \|= pThis->mouse_buttons & 4 ? 0 : BMS_DATA_B2_UP;
347	}
348	/* Immediately clear the IRQ if necessary. */
349	if (pThis->port_c & BMS_CTL_INT_DIS)
350	{
351	PDMDevHlpISASetIrq(pThis->CTX_SUFF(pDevIns), pThis->irq, PDM_IRQ_LEVEL_LOW);
352	pThis->port_c &= ~(BMS_IRQ_BIT(pThis->irq));
353	}
354	}
355
356	static int bms_write_port(MouState *pThis, uint32_t offPort, uint32_t uValue)
357	{
358	int rc = VINF_SUCCESS;
359
360	LogRel3(("%s: write port %d: 0x%02x\n", __PRETTY_FUNCTION__, offPort, uValue));
361
362	switch (offPort)
363	{
364	case BMS_PORT_SIG:
365	/* Update port B. */
366	pThis->port_b = uValue;
367	break;
368	case BMS_PORT_DATA:
369	/* Do nothing, port A is not writable. */
370	break;
371	case BMS_PORT_INIT:
372	pThis->ctrl_port = uValue;
373	break;
374	case BMS_PORT_CTRL:
375	/* Update the high nibble of port C. */
376	pThis->port_c = (uValue & 0xF0) \| (pThis->port_c & 0x0F);
377	bms_update_ctrl(pThis);
378	break;
379	default:
380	AssertMsgFailed(("invalid port %#x\n", offPort));
381	break;
382	}
383	return rc;
384	}
385
386	static uint32_t bms_read_port(MouState *pThis, uint32_t offPort)
387	{
388	uint32_t uValue;
389
390	switch (offPort)
391	{
392	case BMS_PORT_DATA:
393	/* Read port A. */
394	uValue = pThis->port_a;
395	break;
396	case BMS_PORT_SIG:
397	/* Read port B. */
398	uValue = pThis->port_b;
399	break;
400	case BMS_PORT_CTRL:
401	/* Read port C. */
402	uValue = pThis->port_c;
403	/* Some Microsoft driver code reads the control port 10,000 times when
404	* determining the IRQ level. This can occur faster than the IRQ line
405	* transitions and the detection fails. To work around this, we force
406	* the IRQ bit to toggle every once in a while.
407	*/
408	if (pThis->irq_toggle_counter)
409	pThis->irq_toggle_counter--;
410	else
411	{
412	pThis->irq_toggle_counter = 1000;
413	uValue ^= BMS_IRQ_BIT(pThis->irq);
414	}
415	break;
416	case BMS_PORT_INIT:
417	/* Read the 8255A control port. */
418	uValue = pThis->ctrl_port;
419	break;
420	default:
421	AssertMsgFailed(("invalid port %#x\n", offPort));
422	break;
423	}
424	LogRel3(("%s: read port %d: 0x%02x\n", __PRETTY_FUNCTION__, offPort, uValue));
425	return uValue;
426	}
427
428	/**
429	* Port I/O Handler for port IN operations.
430	*
431	* @returns VBox status code.
432	*
433	* @param pDevIns The device instance.
434	* @param pvUser User argument - ignored.
435	* @param Port Port number used for the IN operation.
436	* @param pu32 Where to store the result.
437	* @param cb Number of bytes read.
438	*/
439	PDMBOTHCBDECL(int) mouIOPortRead(PPDMDEVINS pDevIns, void pvUser, RTIOPORT Port, uint32_t pu32, unsigned cb)
440	{
441	NOREF(pvUser);
442	if (cb == 1)
443	{
444	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
445	*pu32 = bms_read_port(pThis, Port & 3);
446	Log2(("mouIOPortRead: Port=%#x cb=%d pu32=%#x\n", Port, cb, pu32));
447	return VINF_SUCCESS;
448	}
449	AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb));
450	return VERR_IOM_IOPORT_UNUSED;
451	}
452
453	/**
454	* Port I/O Handler for port OUT operations.
455	*
456	* @returns VBox status code.
457	*
458	* @param pDevIns The device instance.
459	* @param pvUser User argument - ignored.
460	* @param Port Port number used for the IN operation.
461	* @param u32 The value to output.
462	* @param cb The value size in bytes.
463	*/
464	PDMBOTHCBDECL(int) mouIOPortWrite(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb)
465	{
466	int rc = VINF_SUCCESS;
467	NOREF(pvUser);
468	if (cb == 1)
469	{
470	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
471	rc = bms_write_port(pThis, Port & 3, u32);
472	Log2(("mouIOPortWrite: Port=%#x cb=%d u32=%#x\n", Port, cb, u32));
473	}
474	else
475	AssertMsgFailed(("Port=%#x cb=%d\n", Port, cb));
476	return rc;
477	}
478
479	# ifdef IN_RING3
480
481	/**
482	* Saves the state of the device.
483	*
484	* @returns VBox status code.
485	* @param pDevIns The device instance.
486	* @param pSSMHandle The handle to save the state to.
487	*/
488	static DECLCALLBACK(int) mouSaveExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle)
489	{
490	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
491
492	/* 8255A state. */
493	SSMR3PutU8(pSSMHandle, pThis->port_a);
494	SSMR3PutU8(pSSMHandle, pThis->port_b);
495	SSMR3PutU8(pSSMHandle, pThis->port_c);
496	SSMR3PutU8(pSSMHandle, pThis->ctrl_port);
497	/* Other device state. */
498	SSMR3PutU8(pSSMHandle, pThis->cnt_held);
499	SSMR3PutU8(pSSMHandle, pThis->held_dx);
500	SSMR3PutU8(pSSMHandle, pThis->held_dy);
501	SSMR3PutU8(pSSMHandle, pThis->irq);
502	SSMR3PutU32(pSSMHandle, pThis->cTimerPeriodMs);
503	/* Current mouse state deltas. */
504	SSMR3PutS32(pSSMHandle, pThis->mouse_dx);
505	SSMR3PutS32(pSSMHandle, pThis->mouse_dy);
506	SSMR3PutU8(pSSMHandle, pThis->mouse_buttons_reported);
507	/* Timer. */
508	return TMR3TimerSave(pThis->MouseTimer, pSSMHandle);
509	}
510
511	/**
512	* Loads a saved device state.
513	*
514	* @returns VBox status code.
515	* @param pDevIns The device instance.
516	* @param pSSMHandle The handle to the saved state.
517	* @param uVersion The data unit version number.
518	* @param uPass The data pass.
519	*/
520	static DECLCALLBACK(int) mouLoadExec(PPDMDEVINS pDevIns, PSSMHANDLE pSSMHandle, uint32_t uVersion, uint32_t uPass)
521	{
522	int rc;
523	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
524
525	Assert(uPass == SSM_PASS_FINAL); NOREF(uPass);
526
527	if (uVersion > BMS_SAVED_STATE_VERSION)
528	return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
529
530	/* 8255A state. */
531	SSMR3GetU8(pSSMHandle, &pThis->port_a);
532	SSMR3GetU8(pSSMHandle, &pThis->port_b);
533	SSMR3GetU8(pSSMHandle, &pThis->port_c);
534	SSMR3GetU8(pSSMHandle, &pThis->ctrl_port);
535	/* Other device state. */
536	SSMR3GetU8(pSSMHandle, &pThis->cnt_held);
537	SSMR3GetU8(pSSMHandle, &pThis->held_dx);
538	SSMR3GetU8(pSSMHandle, &pThis->held_dy);
539	SSMR3GetU8(pSSMHandle, &pThis->irq);
540	SSMR3GetU32(pSSMHandle, &pThis->cTimerPeriodMs);
541	/* Current mouse state deltas. */
542	SSMR3GetS32(pSSMHandle, &pThis->mouse_dx);
543	SSMR3GetS32(pSSMHandle, &pThis->mouse_dy);
544	SSMR3GetU8(pSSMHandle, &pThis->mouse_buttons_reported);
545	/* Timer. */
546	rc = TMR3TimerLoad(pThis->MouseTimer, pSSMHandle);
547	return rc;
548	}
549
550	/**
551	* Reset notification.
552	*
553	* @returns VBox status code.
554	* @param pDevIns The device instance data.
555	*/
556	static DECLCALLBACK(void) mouReset(PPDMDEVINS pDevIns)
557	{
558	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
559
560	/* Reinitialize the timer. */
561	pThis->cTimerPeriodMs = BMS_IRQ_PERIOD_MS / 2;
562	TMTimerSetMillies(pThis->MouseTimer, pThis->cTimerPeriodMs);
563
564	bms_reset(pThis);
565	}
566
567
568	/* -=-=-=-=-=- Mouse: IBase -=-=-=-=-=- */
569
570	/**
571	* @interface_method_impl{PDMIBASE,pfnQueryInterface}
572	*/
573	static DECLCALLBACK(void ) mouQueryMouseInterface(PPDMIBASE pInterface, const char pszIID)
574	{
575	MouState *pThis = RT_FROM_MEMBER(pInterface, MouState, Mouse.IBase);
576	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIBASE, &pThis->Mouse.IBase);
577	PDMIBASE_RETURN_INTERFACE(pszIID, PDMIMOUSEPORT, &pThis->Mouse.IPort);
578	return NULL;
579	}
580
581
582	/* -=-=-=-=-=- Mouse: IMousePort -=-=-=-=-=- */
583
584	/**
585	* @interface_method_impl{PDMIMOUSEPORT, pfnPutEvent}
586	*/
587	static DECLCALLBACK(int) mouPutEvent(PPDMIMOUSEPORT pInterface, int32_t dx,
588	int32_t dy, int32_t dz, int32_t dw,
589	uint32_t fButtons)
590	{
591	MouState *pThis = RT_FROM_MEMBER(pInterface, MouState, Mouse.IPort);
592	int rc = PDMCritSectEnter(pThis->CTX_SUFF(pDevIns)->CTX_SUFF(pCritSectRo), VERR_SEM_BUSY);
593	AssertReleaseRC(rc);
594
595	bms_mouse_event(pThis, dx, dy, dz, dw, fButtons);
596
597	PDMCritSectLeave(pThis->CTX_SUFF(pDevIns)->CTX_SUFF(pCritSectRo));
598	return VINF_SUCCESS;
599	}
600
601	/**
602	* @interface_method_impl{PDMIMOUSEPORT, pfnPutEventAbs}
603	*/
604	static DECLCALLBACK(int) mouPutEventAbs(PPDMIMOUSEPORT pInterface, uint32_t x,
605	uint32_t y, int32_t dz, int32_t dw,
606	uint32_t fButtons)
607	{
608	AssertFailedReturn(VERR_NOT_SUPPORTED);
609	}
610
611	/**
612	* @interface_method_impl{PDMIMOUSEPORT, pfnPutEventMultiTouch}
613	*/
614	static DECLCALLBACK(int) mouPutEventMultiTouch(PPDMIMOUSEPORT pInterface, uint8_t cContacts,
615	const uint64_t *pau64Contacts, uint32_t u32ScanTime)
616	{
617	AssertFailedReturn(VERR_NOT_SUPPORTED);
618	}
619
620	/* -=-=-=-=-=- setup code -=-=-=-=-=- */
621
622
623	/**
624	* Attach command.
625	*
626	* This is called to let the device attach to a driver for a specified LUN
627	* during runtime. This is not called during VM construction, the device
628	* constructor have to attach to all the available drivers.
629	*
630	* This is like plugging in the mouse after turning on the PC.
631	*
632	* @returns VBox status code.
633	* @param pDevIns The device instance.
634	* @param iLUN The logical unit which is being detached.
635	* @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
636	* @remark The controller doesn't support this action, this is just
637	* implemented to try out the driver<->device structure.
638	*/
639	static DECLCALLBACK(int) mouAttach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
640	{
641	int rc;
642	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
643
644	AssertMsgReturn(fFlags & PDM_TACH_FLAGS_NOT_HOT_PLUG,
645	("Bus mouse device does not support hotplugging\n"),
646	VERR_INVALID_PARAMETER);
647
648	switch (iLUN)
649	{
650	/* LUN #0: mouse */
651	case 0:
652	rc = PDMDevHlpDriverAttach(pDevIns, iLUN, &pThis->Mouse.IBase, &pThis->Mouse.pDrvBase, "Bus Mouse Port");
653	if (RT_SUCCESS(rc))
654	{
655	pThis->Mouse.pDrv = PDMIBASE_QUERY_INTERFACE(pThis->Mouse.pDrvBase, PDMIMOUSECONNECTOR);
656	if (!pThis->Mouse.pDrv)
657	{
658	AssertLogRelMsgFailed(("LUN #0 doesn't have a mouse interface! rc=%Rrc\n", rc));
659	rc = VERR_PDM_MISSING_INTERFACE;
660	}
661	}
662	else if (rc == VERR_PDM_NO_ATTACHED_DRIVER)
663	{
664	Log(("%s/%d: warning: no driver attached to LUN #0!\n", pDevIns->pReg->szName, pDevIns->iInstance));
665	rc = VINF_SUCCESS;
666	}
667	else
668	AssertLogRelMsgFailed(("Failed to attach LUN #0! rc=%Rrc\n", rc));
669	break;
670
671	default:
672	AssertMsgFailed(("Invalid LUN #%d\n", iLUN));
673	return VERR_PDM_NO_SUCH_LUN;
674	}
675
676	return rc;
677	}
678
679
680	/**
681	* Detach notification.
682	*
683	* This is called when a driver is detaching itself from a LUN of the device.
684	* The device should adjust it's state to reflect this.
685	*
686	* This is like unplugging the network cable to use it for the laptop or
687	* something while the PC is still running.
688	*
689	* @param pDevIns The device instance.
690	* @param iLUN The logical unit which is being detached.
691	* @param fFlags Flags, combination of the PDMDEVATT_FLAGS_* \#defines.
692	* @remark The controller doesn't support this action, this is just
693	* implemented to try out the driver<->device structure.
694	*/
695	static DECLCALLBACK(void) mouDetach(PPDMDEVINS pDevIns, unsigned iLUN, uint32_t fFlags)
696	{
697	#if 0
698	/*
699	* Reset the interfaces and update the controller state.
700	*/
701	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
702	switch (iLUN)
703	{
704	/* LUN #0: mouse */
705	case 0:
706	pThis->Mouse.pDrv = NULL;
707	pThis->Mouse.pDrvBase = NULL;
708	break;
709
710	default:
711	AssertMsgFailed(("Invalid LUN #%d\n", iLUN));
712	break;
713	}
714	#endif
715	}
716
717
718	/**
719	* @copydoc FNPDMDEVRELOCATE
720	*/
721	static DECLCALLBACK(void) mouRelocate(PPDMDEVINS pDevIns, RTGCINTPTR offDelta)
722	{
723	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
724	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
725	}
726
727
728	/**
729	* @interface_method_impl{PDMDEVREG,pfnConstruct}
730	*/
731	static DECLCALLBACK(int) mouConstruct(PPDMDEVINS pDevIns, int iInstance, PCFGMNODE pCfg)
732	{
733	MouState pThis = PDMINS_2_DATA(pDevIns, MouState );
734	int rc;
735	bool fGCEnabled;
736	bool fR0Enabled;
737	uint8_t irq_lvl;
738	Assert(iInstance == 0);
739
740	PDMDEV_CHECK_VERSIONS_RETURN(pDevIns);
741
742	/*
743	* Validate and read the configuration.
744	*/
745	if (!CFGMR3AreValuesValid(pCfg, "IRQ\0GCEnabled\0R0Enabled\0"))
746	return VERR_PDM_DEVINS_UNKNOWN_CFG_VALUES;
747	rc = CFGMR3QueryBoolDef(pCfg, "GCEnabled", &fGCEnabled, true);
748	if (RT_FAILURE(rc))
749	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"GCEnabled\" from the config"));
750	rc = CFGMR3QueryBoolDef(pCfg, "R0Enabled", &fR0Enabled, true);
751	if (RT_FAILURE(rc))
752	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"R0Enabled\" from the config"));
753	rc = CFGMR3QueryU8Def(pCfg, "IRQ", &irq_lvl, BMS_DEFAULT_IRQ);
754	if (RT_FAILURE(rc))
755	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Failed to query \"IRQ\" from the config"));
756	if ((irq_lvl < 2) \|\| (irq_lvl > 5))
757	return PDMDEV_SET_ERROR(pDevIns, rc, N_("Invalid \"IRQ\" config setting"));
758
759	pThis->irq = irq_lvl;
760	///@todo: remove after properly enabling RC/GC support
761	fGCEnabled = fR0Enabled = false;
762	Log(("busmouse: IRQ=%d fGCEnabled=%RTbool fR0Enabled=%RTbool\n", irq_lvl, fGCEnabled, fR0Enabled));
763
764	/*
765	* Initialize the interfaces.
766	*/
767	pThis->pDevInsR3 = pDevIns;
768	pThis->pDevInsR0 = PDMDEVINS_2_R0PTR(pDevIns);
769	pThis->pDevInsRC = PDMDEVINS_2_RCPTR(pDevIns);
770	pThis->Mouse.IBase.pfnQueryInterface = mouQueryMouseInterface;
771	pThis->Mouse.IPort.pfnPutEvent = mouPutEvent;
772	pThis->Mouse.IPort.pfnPutEventAbs = mouPutEventAbs;
773	pThis->Mouse.IPort.pfnPutEventMultiTouch = mouPutEventMultiTouch;
774
775	/*
776	* Create the interrupt timer.
777	*/
778	rc = PDMDevHlpTMTimerCreate(pDevIns, TMCLOCK_VIRTUAL, bmsTimerCallback,
779	pThis, TMTIMER_FLAGS_DEFAULT_CRIT_SECT,
780	"Bus Mouse Timer", &pThis->MouseTimer);
781	if (RT_FAILURE(rc))
782	return rc;
783
784	/*
785	* Register I/O ports, saved state, and mouse event handlers.
786	*/
787	rc = PDMDevHlpIOPortRegister(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, NULL, mouIOPortWrite, mouIOPortRead, NULL, NULL, "Bus Mouse");
788	if (RT_FAILURE(rc))
789	return rc;
790	if (fGCEnabled)
791	{
792	rc = PDMDevHlpIOPortRegisterRC(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, 0, "mouIOPortWrite", "mouIOPortRead", NULL, NULL, "Bus Mouse");
793	if (RT_FAILURE(rc))
794	return rc;
795	}
796	if (fR0Enabled)
797	{
798	rc = PDMDevHlpIOPortRegisterR0(pDevIns, BMS_IO_BASE, BMS_IO_SIZE, 0, "mouIOPortWrite", "mouIOPortRead", NULL, NULL, "Bus Mouse");
799	if (RT_FAILURE(rc))
800	return rc;
801	}
802	rc = PDMDevHlpSSMRegister(pDevIns, BMS_SAVED_STATE_VERSION, sizeof(*pThis), mouSaveExec, mouLoadExec);
803	if (RT_FAILURE(rc))
804	return rc;
805
806	/*
807	* Attach to the mouse driver.
808	*/
809	rc = mouAttach(pDevIns, 0, PDM_TACH_FLAGS_NOT_HOT_PLUG);
810	if (RT_FAILURE(rc))
811	return rc;
812
813	/*
814	* Initialize the device state.
815	*/
816	mouReset(pDevIns);
817
818	return VINF_SUCCESS;
819	}
820
821
822	/**
823	* The device registration structure.
824	*/
825	const PDMDEVREG g_DeviceBusMouse =
826	{
827	/* u32Version */
828	PDM_DEVREG_VERSION,
829	/* szName */
830	"busmouse",
831	/* szRCMod */
832	"VBoxDDRC.rc",
833	/* szR0Mod */
834	"VBoxDDR0.r0",
835	/* pszDescription */
836	"Microsoft Bus Mouse controller. "
837	"LUN #0 is the mouse connector.",
838	/* fFlags */
839	PDM_DEVREG_FLAGS_HOST_BITS_DEFAULT \| PDM_DEVREG_FLAGS_GUEST_BITS_32_64 \| PDM_DEVREG_FLAGS_PAE36
840	\| PDM_DEVREG_FLAGS_RC \| PDM_DEVREG_FLAGS_R0,
841	/* fClass */
842	PDM_DEVREG_CLASS_INPUT,
843	/* cMaxInstances */
844	1,
845	/* cbInstance */
846	sizeof(MouState),
847	/* pfnConstruct */
848	mouConstruct,
849	/* pfnDestruct */
850	NULL,
851	/* pfnRelocate */
852	mouRelocate,
853	/* pfnMemSetup */
854	NULL,
855	/* pfnPowerOn */
856	NULL,
857	/* pfnReset */
858	mouReset,
859	/* pfnSuspend */
860	NULL,
861	/* pfnResume */
862	NULL,
863	/* pfnAttach */
864	mouAttach,
865	/* pfnDetach */
866	mouDetach,
867	/* pfnQueryInterface. */
868	NULL,
869	/* pfnInitComplete */
870	NULL,
871	/* pfnPowerOff */
872	NULL,
873	/* pfnSoftReset */
874	NULL,
875	/* u32VersionEnd */
876	PDM_DEVREG_VERSION
877	};
878
879	#ifdef VBOX_IN_EXTPACK_R3
880	/**
881	* @callback_method_impl{FNPDMVBOXDEVICESREGISTER}
882	*/
883	extern "C" DECLEXPORT(int) VBoxDevicesRegister(PPDMDEVREGCB pCallbacks, uint32_t u32Version)
884	{
885	AssertLogRelMsgReturn(u32Version >= VBOX_VERSION,
886	("u32Version=%#x VBOX_VERSION=%#x\n", u32Version, VBOX_VERSION),
887	VERR_EXTPACK_VBOX_VERSION_MISMATCH);
888	AssertLogRelMsgReturn(pCallbacks->u32Version == PDM_DEVREG_CB_VERSION,
889	("pCallbacks->u32Version=%#x PDM_DEVREG_CB_VERSION=%#x\n", pCallbacks->u32Version, PDM_DEVREG_CB_VERSION),
890	VERR_VERSION_MISMATCH);
891
892	return pCallbacks->pfnRegister(pCallbacks, &g_DeviceBusMouse);
893	}
894	#endif /* VBOX_IN_EXTPACK_R3 */
895
896	# endif /* IN_RING3 */
897	#endif /* !VBOX_DEVICE_STRUCT_TESTCASE */
898

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/ExtPacks/BusMouseSample/BusMouse.cpp@ 61888

Download in other formats: