vboxdrv.sh@ 78047

Last change on this file since 78047 was 78047, checked in by vboxsync, 6 years ago
Installer/linux: Fix previous, the paren is intended and must be quoted (ticketref:18226).
Property svn:eol-style set to `LF` Property svn:keywords set to `Author Date Id Revision`
File size: 18.1 KB

Line
1	#! /bin/sh
2	# Oracle VM VirtualBox
3	# Linux kernel module init script
4
5	#
6	# Copyright (C) 2006-2019 Oracle Corporation
7	#
8	# This file is part of VirtualBox Open Source Edition (OSE), as
9	# available from http://www.virtualbox.org. This file is free software;
10	# you can redistribute it and/or modify it under the terms of the GNU
11	# General Public License (GPL) as published by the Free Software
12	# Foundation, in version 2 as it comes in the "COPYING" file of the
13	# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	#
16
17	# chkconfig: 345 20 80
18	# description: VirtualBox Linux kernel module
19	#
20	### BEGIN INIT INFO
21	# Provides: vboxdrv
22	# Required-Start: $syslog
23	# Required-Stop:
24	# Default-Start: 2 3 4 5
25	# Default-Stop: 0 1 6
26	# Short-Description: VirtualBox Linux kernel module
27	### END INIT INFO
28
29	## @todo This file duplicates a lot of script with vboxadd.sh. When making
30	# changes please try to reduce differences between the two wherever possible.
31
32	## @todo Remove the stop_vms target so that this script is only relevant to
33	# kernel modules. Nice but not urgent.
34
35	PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
36	DEVICE=/dev/vboxdrv
37	MODPROBE=/sbin/modprobe
38	SCRIPTNAME=vboxdrv.sh
39
40	# The below is GNU-specific. See VBox.sh for the longer Solaris/OS X version.
41	TARGET=`readlink -e -- "${0}"` \|\| exit 1
42	SCRIPT_DIR="${TARGET%/[!/]*}"
43
44	if $MODPROBE -c \| grep -q '^allow_unsupported_modules *0'; then
45	MODPROBE="$MODPROBE --allow-unsupported-modules"
46	fi
47
48	setup_log()
49	{
50	test -n "${LOG}" && return 0
51	# Rotate log files
52	LOG="/var/log/vbox-setup.log"
53	mv "${LOG}.3" "${LOG}.4" 2>/dev/null
54	mv "${LOG}.2" "${LOG}.3" 2>/dev/null
55	mv "${LOG}.1" "${LOG}.2" 2>/dev/null
56	mv "${LOG}" "${LOG}.1" 2>/dev/null
57	}
58
59	[ -f /etc/vbox/vbox.cfg ] && . /etc/vbox/vbox.cfg
60	export BUILD_TYPE
61	export USERNAME
62	export USER=$USERNAME
63
64	if test -n "${INSTALL_DIR}" && test -x "${INSTALL_DIR}/VirtualBox"; then
65	MODULE_SRC="${INSTALL_DIR}/src/vboxhost"
66	elif test -x /usr/lib/virtualbox/VirtualBox; then
67	INSTALL_DIR=/usr/lib/virtualbox
68	MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
69	elif test -x "${SCRIPT_DIR}/VirtualBox"; then
70	# Executing from the build directory
71	INSTALL_DIR="${SCRIPT_DIR}"
72	MODULE_SRC="${INSTALL_DIR}/src"
73	else
74	# Silently exit if the package was uninstalled but not purged.
75	# Applies to Debian packages only (but shouldn't hurt elsewhere)
76	exit 0
77	fi
78	VIRTUALBOX="${INSTALL_DIR}/VirtualBox"
79	VBOXMANAGE="${INSTALL_DIR}/VBoxManage"
80	BUILDINTMP="${MODULE_SRC}/build_in_tmp"
81	if test -u "${VIRTUALBOX}"; then
82	GROUP=root
83	DEVICE_MODE=0600
84	else
85	GROUP=vboxusers
86	DEVICE_MODE=0660
87	fi
88
89	[ -r /etc/default/virtualbox ] && . /etc/default/virtualbox
90
91	# Preamble for Gentoo
92	if [ "`which $0`" = "/sbin/rc" ]; then
93	shift
94	fi
95
96	begin_msg()
97	{
98	test -n "${2}" && echo "${SCRIPTNAME}: ${1}."
99	logger -t "${SCRIPTNAME}" "${1}."
100	}
101
102	succ_msg()
103	{
104	logger -t "${SCRIPTNAME}" "${1}."
105	}
106
107	fail_msg()
108	{
109	echo "${SCRIPTNAME}: failed: ${1}." >&2
110	logger -t "${SCRIPTNAME}" "failed: ${1}."
111	}
112
113	failure()
114	{
115	fail_msg "$1"
116	exit 1
117	}
118
119	running()
120	{
121	lsmod \| grep -q "$1[^_-]"
122	}
123
124	log()
125	{
126	setup_log
127	echo "${1}" >> "${LOG}"
128	}
129
130	module_build_log()
131	{
132	setup_log
133	echo "${1}" \| egrep -v \
134	"^test -e include/generated/autoconf.h\|^echo >&2\|^/bin/false\)$" \
135	>> "${LOG}"
136	}
137
138	## Output the vboxdrv part of our udev rule. This is redirected to the right file.
139	udev_write_vboxdrv() {
140	VBOXDRV_GRP="$1"
141	VBOXDRV_MODE="$2"
142
143	echo "KERNEL==\"vboxdrv\", NAME=\"vboxdrv\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
144	echo "KERNEL==\"vboxdrvu\", NAME=\"vboxdrvu\", OWNER=\"root\", GROUP=\"root\", MODE=\"0666\""
145	echo "KERNEL==\"vboxnetctl\", NAME=\"vboxnetctl\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
146	}
147
148	## Output the USB part of our udev rule. This is redirected to the right file.
149	udev_write_usb() {
150	INSTALLATION_DIR="$1"
151	USB_GROUP="$2"
152
153	echo "SUBSYSTEM==\"usb_device\", ACTION==\"add\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
154	echo "SUBSYSTEM==\"usb\", ACTION==\"add\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
155	echo "SUBSYSTEM==\"usb_device\", ACTION==\"remove\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
156	echo "SUBSYSTEM==\"usb\", ACTION==\"remove\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
157	}
158
159	## Generate our udev rule file. This takes a change in udev rule syntax in
160	## version 55 into account. It only creates rules for USB for udev versions
161	## recent enough to support USB device nodes.
162	generate_udev_rule() {
163	VBOXDRV_GRP="$1" # The group owning the vboxdrv device
164	VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
165	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
166	USB_GROUP="$4" # The group that has permission to access USB devices
167	NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
168
169	# Extra space!
170	case "$USB_GROUP" in ?*) USB_GROUP=" $USB_GROUP" ;; esac
171	case "$NO_INSTALL" in "1") return ;; esac
172	udev_write_vboxdrv "$VBOXDRV_GRP" "$VBOXDRV_MODE"
173	udev_write_usb "$INSTALLATION_DIR" "$USB_GROUP"
174	}
175
176	## Install udev rule (disable with INSTALL_NO_UDEV=1 in
177	## /etc/default/virtualbox).
178	install_udev() {
179	VBOXDRV_GRP="$1" # The group owning the vboxdrv device
180	VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
181	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
182	USB_GROUP="$4" # The group that has permission to access USB devices
183	NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
184
185	if test -d /etc/udev/rules.d; then
186	generate_udev_rule "$VBOXDRV_GRP" "$VBOXDRV_MODE" "$INSTALLATION_DIR" \
187	"$USB_GROUP" "$NO_INSTALL"
188	fi
189	# Remove old udev description file
190	rm -f /etc/udev/rules.d/10-vboxdrv.rules 2> /dev/null
191	}
192
193	## Create a usb device node for a given sysfs path to a USB device.
194	install_create_usb_node_for_sysfs() {
195	path="$1" # sysfs path for the device
196	usb_createnode="$2" # Path to the USB device node creation script
197	usb_group="$3" # The group to give ownership of the node to
198	if test -r "${path}/dev"; then
199	dev="`cat "${path}/dev" 2> /dev/null`"
200	major="`expr "$dev" : '$.*$:' 2> /dev/null`"
201	minor="`expr "$dev" : '.:$.$' 2> /dev/null`"
202	class="`cat ${path}/bDeviceClass 2> /dev/null`"
203	sh "${usb_createnode}" "$major" "$minor" "$class" \
204	"${usb_group}" 2>/dev/null
205	fi
206	}
207
208	udev_rule_file=/etc/udev/rules.d/60-vboxdrv.rules
209	sysfs_usb_devices="/sys/bus/usb/devices/*"
210
211	## Install udev rules and create device nodes for usb access
212	setup_usb() {
213	VBOXDRV_GRP="$1" # The group that should own /dev/vboxdrv
214	VBOXDRV_MODE="$2" # The mode to be used for /dev/vboxdrv
215	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
216	USB_GROUP="$4" # The group that should own the /dev/vboxusb device
217	# nodes unless INSTALL_NO_GROUP=1 in
218	# /etc/default/virtualbox. Optional.
219	usb_createnode="$INSTALLATION_DIR/VBoxCreateUSBNode.sh"
220	# install udev rule (disable with INSTALL_NO_UDEV=1 in
221	# /etc/default/virtualbox)
222	if [ "$INSTALL_NO_GROUP" != "1" ]; then
223	usb_group=$USB_GROUP
224	vboxdrv_group=$VBOXDRV_GRP
225	else
226	usb_group=root
227	vboxdrv_group=root
228	fi
229	install_udev "${vboxdrv_group}" "$VBOXDRV_MODE" \
230	"$INSTALLATION_DIR" "${usb_group}" \
231	"$INSTALL_NO_UDEV" > ${udev_rule_file}
232	# Build our device tree
233	for i in ${sysfs_usb_devices}; do # This line intentionally without quotes.
234	install_create_usb_node_for_sysfs "$i" "${usb_createnode}" \
235	"${usb_group}"
236	done
237	}
238
239	cleanup_usb()
240	{
241	# Remove udev description file
242	rm -f /etc/udev/rules.d/60-vboxdrv.rules
243	rm -f /etc/udev/rules.d/10-vboxdrv.rules
244
245	# Remove our USB device tree
246	rm -rf /dev/vboxusb
247	}
248
249	start()
250	{
251	begin_msg "Starting VirtualBox services" console
252	if [ -d /proc/xen ]; then
253	failure "Running VirtualBox in a Xen environment is not supported"
254	fi
255	if ! running vboxdrv; then
256	if ! rm -f $DEVICE; then
257	failure "Cannot remove $DEVICE"
258	fi
259	if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
260	setup
261	if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
262	failure "modprobe vboxdrv failed. Please use 'dmesg' to find out why"
263	fi
264	fi
265	sleep .2
266	fi
267	# ensure the character special exists
268	if [ ! -c $DEVICE ]; then
269	MAJOR=`sed -n 's;$[0-9]\+$ vboxdrv$;\1;p' /proc/devices`
270	if [ ! -z "$MAJOR" ]; then
271	MINOR=0
272	else
273	MINOR=`sed -n 's;$[0-9]\+$ vboxdrv$;\1;p' /proc/misc`
274	if [ ! -z "$MINOR" ]; then
275	MAJOR=10
276	fi
277	fi
278	if [ -z "$MAJOR" ]; then
279	rmmod vboxdrv 2>/dev/null
280	failure "Cannot locate the VirtualBox device"
281	fi
282	if ! mknod -m 0660 $DEVICE c $MAJOR $MINOR 2>/dev/null; then
283	rmmod vboxdrv 2>/dev/null
284	failure "Cannot create device $DEVICE with major $MAJOR and minor $MINOR"
285	fi
286	fi
287	# ensure permissions
288	if ! chown :"${GROUP}" $DEVICE 2>/dev/null; then
289	rmmod vboxpci 2>/dev/null
290	rmmod vboxnetadp 2>/dev/null
291	rmmod vboxnetflt 2>/dev/null
292	rmmod vboxdrv 2>/dev/null
293	failure "Cannot change group ${GROUP} for device $DEVICE"
294	fi
295	if ! $MODPROBE vboxnetflt > /dev/null 2>&1; then
296	failure "modprobe vboxnetflt failed. Please use 'dmesg' to find out why"
297	fi
298	if ! $MODPROBE vboxnetadp > /dev/null 2>&1; then
299	failure "modprobe vboxnetadp failed. Please use 'dmesg' to find out why"
300	fi
301	if ! $MODPROBE vboxpci > /dev/null 2>&1; then
302	failure "modprobe vboxpci failed. Please use 'dmesg' to find out why"
303	fi
304	# Create the /dev/vboxusb directory if the host supports that method
305	# of USB access. The USB code checks for the existance of that path.
306	if grep -q usb_device /proc/devices; then
307	mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
308	chown root:vboxusers /dev/vboxusb 2>/dev/null
309	fi
310	# Remove any kernel modules left over from previously installed kernels.
311	cleanup only_old
312	succ_msg "VirtualBox services started"
313	}
314
315	stop()
316	{
317	begin_msg "Stopping VirtualBox services" console
318
319	if running vboxpci; then
320	if ! rmmod vboxpci 2>/dev/null; then
321	failure "Cannot unload module vboxpci"
322	fi
323	fi
324	if running vboxnetadp; then
325	if ! rmmod vboxnetadp 2>/dev/null; then
326	failure "Cannot unload module vboxnetadp"
327	fi
328	fi
329	if running vboxdrv; then
330	if running vboxnetflt; then
331	if ! rmmod vboxnetflt 2>/dev/null; then
332	failure "Cannot unload module vboxnetflt"
333	fi
334	fi
335	if ! rmmod vboxdrv 2>/dev/null; then
336	failure "Cannot unload module vboxdrv"
337	fi
338	if ! rm -f $DEVICE; then
339	failure "Cannot unlink $DEVICE"
340	fi
341	fi
342	succ_msg "VirtualBox services stopped"
343	}
344
345	# enter the following variables in /etc/default/virtualbox:
346	# SHUTDOWN_USERS="foo bar"
347	# check for running VMs of user foo and user bar
348	# SHUTDOWN=poweroff
349	# SHUTDOWN=acpibutton
350	# SHUTDOWN=savestate
351	# select one of these shutdown methods for running VMs
352	stop_vms()
353	{
354	wait=0
355	for i in $SHUTDOWN_USERS; do
356	# don't create the ipcd directory with wrong permissions!
357	if [ -d /tmp/.vbox-$i-ipc ]; then
358	export VBOX_IPC_SOCKETID="$i"
359	VMS=`$VBOXMANAGE --nologo list runningvms \| sed -e 's/^".".{$.*$}/\1/' 2>/dev/null`
360	if [ -n "$VMS" ]; then
361	if [ "$SHUTDOWN" = "poweroff" ]; then
362	begin_msg "Powering off remaining VMs"
363	for v in $VMS; do
364	$VBOXMANAGE --nologo controlvm $v poweroff
365	done
366	succ_msg "Remaining VMs powered off"
367	elif [ "$SHUTDOWN" = "acpibutton" ]; then
368	begin_msg "Sending ACPI power button event to remaining VMs"
369	for v in $VMS; do
370	$VBOXMANAGE --nologo controlvm $v acpipowerbutton
371	wait=30
372	done
373	succ_msg "ACPI power button event sent to remaining VMs"
374	elif [ "$SHUTDOWN" = "savestate" ]; then
375	begin_msg "Saving state of remaining VMs"
376	for v in $VMS; do
377	$VBOXMANAGE --nologo controlvm $v savestate
378	done
379	succ_msg "State of remaining VMs saved"
380	fi
381	fi
382	fi
383	done
384	# wait for some seconds when doing ACPI shutdown
385	if [ "$wait" -ne 0 ]; then
386	begin_msg "Waiting for $wait seconds for VM shutdown"
387	sleep $wait
388	succ_msg "Waited for $wait seconds for VM shutdown"
389	fi
390	}
391
392	cleanup()
393	{
394	# If this is set, only remove kernel modules for no longer installed
395	# kernels. Note that only generated kernel modules should be placed
396	# in /lib/modules/*/misc. Anything that we should not remove automatically
397	# should go elsewhere.
398	only_old="${1}"
399	for i in /lib/modules/*; do
400	# Check whether we are only cleaning up for uninstalled kernels.
401	test -n "${only_old}" && test -e "${i}/kernel/drivers" && continue
402	# We could just do "rm -f", but we only want to try deleting folders if
403	# we are sure they were ours, i.e. they had our modules in beforehand.
404	if test -e "${i}/misc/vboxdrv.ko" \
405	\|\| test -e "${i}/misc/vboxnetadp.ko" \
406	\|\| test -e "${i}/misc/vboxnetflt.ko" \
407	\|\| test -e "${i}/misc/vboxpci.ko"; then
408	rm -f "${i}/misc/vboxdrv.ko" "${i}/misc/vboxnetadp.ko" \
409	"${i}/misc/vboxnetflt.ko" "${i}/misc/vboxpci.ko"
410	version=`expr "${i}" : "/lib/modules/$.*$"`
411	depmod -a "${version}"
412	sync
413	fi
414	# Remove the kernel version folder if it was empty except for us.
415	test "`echo ${i}/misc/* ${i}/misc/.?* ${i}/* ${i}/.?*`" \
416	= "${i}/misc/* ${i}/misc/.. ${i}/misc ${i}/.." &&
417	rmdir "${i}/misc" "${i}" # We used to leave empty folders.
418	done
419	}
420
421	# setup_script
422	setup()
423	{
424	begin_msg "Building VirtualBox kernel modules" console
425	log "Building the main VirtualBox module."
426	if ! myerr=`$BUILDINTMP \
427	--save-module-symvers /tmp/vboxdrv-Module.symvers \
428	--module-source "$MODULE_SRC/vboxdrv" \
429	--no-print-directory install 2>&1`; then
430	"${INSTALL_DIR}/check_module_dependencies.sh" \|\| exit 1
431	log "Error building the module:"
432	module_build_log "$myerr"
433	failure "Look at $LOG to find out what went wrong"
434	fi
435	log "Building the net filter module."
436	if ! myerr=`$BUILDINTMP \
437	--use-module-symvers /tmp/vboxdrv-Module.symvers \
438	--module-source "$MODULE_SRC/vboxnetflt" \
439	--no-print-directory install 2>&1`; then
440	log "Error building the module:"
441	module_build_log "$myerr"
442	failure "Look at $LOG to find out what went wrong"
443	fi
444	log "Building the net adaptor module."
445	if ! myerr=`$BUILDINTMP \
446	--use-module-symvers /tmp/vboxdrv-Module.symvers \
447	--module-source "$MODULE_SRC/vboxnetadp" \
448	--no-print-directory install 2>&1`; then
449	log "Error building the module:"
450	module_build_log "$myerr"
451	failure "Look at $LOG to find out what went wrong"
452	fi
453	log "Building the PCI pass-through module."
454	if ! myerr=`$BUILDINTMP \
455	--use-module-symvers /tmp/vboxdrv-Module.symvers \
456	--module-source "$MODULE_SRC/vboxpci" \
457	--no-print-directory install 2>&1`; then
458	log "Error building the module:"
459	module_build_log "$myerr"
460	failure "Look at $LOG to find out what went wrong"
461	fi
462	rm -f /etc/vbox/module_not_compiled
463	depmod -a
464	sync
465	succ_msg "VirtualBox kernel modules built"
466	}
467
468	dmnstatus()
469	{
470	if running vboxdrv; then
471	str="vboxdrv"
472	if running vboxnetflt; then
473	str="$str, vboxnetflt"
474	if running vboxnetadp; then
475	str="$str, vboxnetadp"
476	fi
477	fi
478	if running vboxpci; then
479	str="$str, vboxpci"
480	fi
481	echo "VirtualBox kernel modules ($str) are loaded."
482	for i in $SHUTDOWN_USERS; do
483	# don't create the ipcd directory with wrong permissions!
484	if [ -d /tmp/.vbox-$i-ipc ]; then
485	export VBOX_IPC_SOCKETID="$i"
486	VMS=`$VBOXMANAGE --nologo list runningvms \| sed -e 's/^".".{$.*$}/\1/' 2>/dev/null`
487	if [ -n "$VMS" ]; then
488	echo "The following VMs are currently running:"
489	for v in $VMS; do
490	echo " $v"
491	done
492	fi
493	fi
494	done
495	else
496	echo "VirtualBox kernel module is not loaded."
497	fi
498	}
499
500	case "$1" in
501	start)
502	start
503	;;
504	stop)
505	stop_vms
506	stop
507	;;
508	stop_vms)
509	stop_vms
510	;;
511	restart)
512	stop && start
513	;;
514	setup)
515	test -n "${2}" && export KERN_VER="${2}"
516	# Create udev rule and USB device nodes.
517	## todo Wouldn't it make more sense to install the rule to /lib/udev? This
518	## is not a user-created configuration file after all.
519	## todo Do we need a udev rule to create /dev/vboxdrv[u] at all? We have
520	## working fall-back code here anyway, and the "right" code is more complex
521	## than the fall-back. Unnecessary duplication?
522	stop && cleanup
523	setup_usb "$GROUP" "$DEVICE_MODE" "$INSTALL_DIR"
524	start
525	;;
526	cleanup)
527	stop && cleanup
528	cleanup_usb
529	;;
530	force-reload)
531	stop
532	start
533	;;
534	status)
535	dmnstatus
536	;;
537	*)
538	echo "Usage: $0 {start\|stop\|stop_vms\|restart\|force-reload\|status}"
539	exit 1
540	esac
541
542	exit 0

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Installer/linux/vboxdrv.sh@ 78047

Download in other formats: