vboxdrv.sh@ 89158

Last change on this file since 89158 was 89158, checked in by vboxsync, 4 years ago
Installer: Linux: Temporary add diagnostic logging to vboxdrv.sh (2) (to be reverted).
Property svn:eol-style set to `LF` Property svn:keywords set to `Author Date Id Revision`
File size: 21.8 KB

Line
1	#! /bin/sh
2	# Oracle VM VirtualBox
3	# Linux kernel module init script
4
5	#
6	# Copyright (C) 2006-2020 Oracle Corporation
7	#
8	# This file is part of VirtualBox Open Source Edition (OSE), as
9	# available from http://www.virtualbox.org. This file is free software;
10	# you can redistribute it and/or modify it under the terms of the GNU
11	# General Public License (GPL) as published by the Free Software
12	# Foundation, in version 2 as it comes in the "COPYING" file of the
13	# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
14	# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
15	#
16
17	# chkconfig: 345 20 80
18	# description: VirtualBox Linux kernel module
19	#
20	### BEGIN INIT INFO
21	# Provides: vboxdrv
22	# Required-Start: $syslog
23	# Required-Stop:
24	# Default-Start: 2 3 4 5
25	# Default-Stop: 0 1 6
26	# Short-Description: VirtualBox Linux kernel module
27	### END INIT INFO
28
29	## @todo This file duplicates a lot of script with vboxadd.sh. When making
30	# changes please try to reduce differences between the two wherever possible.
31
32	## @todo Remove the stop_vms target so that this script is only relevant to
33	# kernel modules. Nice but not urgent.
34
35	PATH=/sbin:/bin:/usr/sbin:/usr/bin:$PATH
36	DEVICE=/dev/vboxdrv
37	MODPROBE=/sbin/modprobe
38	SCRIPTNAME=vboxdrv.sh
39
40	# The below is GNU-specific. See VBox.sh for the longer Solaris/OS X version.
41	TARGET=`readlink -e -- "${0}"` \|\| exit 1
42	SCRIPT_DIR="${TARGET%/[!/]*}"
43
44	if $MODPROBE -c \| grep -q '^allow_unsupported_modules *0'; then
45	MODPROBE="$MODPROBE --allow-unsupported-modules"
46	fi
47
48	setup_log()
49	{
50	test -n "${LOG}" && return 0
51	# Rotate log files
52	LOG="/var/log/vbox-setup.log"
53	mv "${LOG}.3" "${LOG}.4" 2>/dev/null
54	mv "${LOG}.2" "${LOG}.3" 2>/dev/null
55	mv "${LOG}.1" "${LOG}.2" 2>/dev/null
56	mv "${LOG}" "${LOG}.1" 2>/dev/null
57	}
58
59	[ -f /etc/vbox/vbox.cfg ] && . /etc/vbox/vbox.cfg
60	export VBOX_KBUILD_TYPE
61	export USERNAME
62	export USER=$USERNAME
63
64	if test -n "${INSTALL_DIR}" && test -x "${INSTALL_DIR}/VirtualBox"; then
65	MODULE_SRC="${INSTALL_DIR}/src/vboxhost"
66	elif test -x /usr/lib/virtualbox/VirtualBox; then
67	INSTALL_DIR=/usr/lib/virtualbox
68	MODULE_SRC="/usr/share/virtualbox/src/vboxhost"
69	elif test -x "${SCRIPT_DIR}/VirtualBox"; then
70	# Executing from the build directory
71	INSTALL_DIR="${SCRIPT_DIR}"
72	MODULE_SRC="${INSTALL_DIR}/src"
73	else
74	# Silently exit if the package was uninstalled but not purged.
75	# Applies to Debian packages only (but shouldn't hurt elsewhere)
76	exit 0
77	fi
78	VIRTUALBOX="${INSTALL_DIR}/VirtualBox"
79	VBOXMANAGE="${INSTALL_DIR}/VBoxManage"
80	BUILDINTMP="${MODULE_SRC}/build_in_tmp"
81	if test -u "${VIRTUALBOX}"; then
82	GROUP=root
83	DEVICE_MODE=0600
84	else
85	GROUP=vboxusers
86	DEVICE_MODE=0660
87	fi
88
89	KERN_VER=`uname -r`
90	if test -e "${MODULE_SRC}/vboxpci"; then
91	MODULE_LIST="vboxdrv vboxnetflt vboxnetadp vboxpci"
92	else
93	MODULE_LIST="vboxdrv vboxnetflt vboxnetadp"
94	fi
95	# Secure boot state.
96	case "`mokutil --sb-state 2>/dev/null`" in
97	"disabled in shim") unset HAVE_SEC_BOOT;;
98	"SecureBoot enabled") HAVE_SEC_BOOT=true;;
99	*) unset HAVE_SEC_BOOT;;
100	esac
101	# So far we can only sign modules on Ubuntu and on Debian 10 and later.
102	DEB_PUB_KEY=/var/lib/shim-signed/mok/MOK.der
103	DEB_PRIV_KEY=/var/lib/shim-signed/mok/MOK.priv
104	unset HAVE_DEB_KEY
105	case "`mokutil --test-key "$DEB_PUB_KEY" 2>/dev/null`" in
106	"is already") DEB_KEY_ENROLLED=true;;
107	*) unset DEB_KEY_ENROLLED;;
108	esac
109
110	[ -r /etc/default/virtualbox ] && . /etc/default/virtualbox
111
112	# Preamble for Gentoo
113	if [ "`which $0`" = "/sbin/rc" ]; then
114	shift
115	fi
116
117	begin_msg()
118	{
119	test -n "${2}" && echo "${SCRIPTNAME}: ${1}."
120	logger -t "${SCRIPTNAME}" "${1}."
121	}
122
123	succ_msg()
124	{
125	logger -t "${SCRIPTNAME}" "${1}."
126	}
127
128	fail_msg()
129	{
130	echo "${SCRIPTNAME}: failed: ${1}." >&2
131	logger -t "${SCRIPTNAME}" "failed: ${1}."
132	}
133
134	failure()
135	{
136	fail_msg "$1"
137	exit 1
138	}
139
140	running()
141	{
142	lsmod \| grep -q "$1[^_-]"
143	}
144
145	log()
146	{
147	setup_log
148	echo "${1}" >> "${LOG}"
149	}
150
151	module_build_log()
152	{
153	setup_log
154	echo "${1}" \| egrep -v \
155	"^test -e include/generated/autoconf.h\|^echo >&2\|^/bin/false\)$" \
156	>> "${LOG}"
157	}
158
159	# Detect VirtualBox version info or report error on error.
160	VBOX_VERSION="$($VBOXMANAGE -v 2>/dev/null \| cut -d r -f1)"
161	VBOX_REVISION="r$($VBOXMANAGE -v 2>/dev/null \| cut -d r -f2)"
162	echo diagnostics: cut: $(which cut) $([ -x $(which cut) ] && echo 1)
163	echo diagnostics: VBOXMANAGE: $VBOXMANAGE $([ -x "$VBOXMANAGE" ] && echo 1)
164	echo diagnostics: VBOX_VERSION = .$VBOX_VERSION.
165	echo diagnostics: VBOX_REVISION = .$VBOX_REVISION.
166	if test -z "$VBOX_VERSION" -o "$VBOX_REVISION" = "r"; then
167	failure 'Cannot detect VirtualBox version'
168	fi
169
170	## Output the vboxdrv part of our udev rule. This is redirected to the right file.
171	udev_write_vboxdrv() {
172	VBOXDRV_GRP="$1"
173	VBOXDRV_MODE="$2"
174
175	echo "KERNEL==\"vboxdrv\", NAME=\"vboxdrv\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
176	echo "KERNEL==\"vboxdrvu\", NAME=\"vboxdrvu\", OWNER=\"root\", GROUP=\"root\", MODE=\"0666\""
177	echo "KERNEL==\"vboxnetctl\", NAME=\"vboxnetctl\", OWNER=\"root\", GROUP=\"$VBOXDRV_GRP\", MODE=\"$VBOXDRV_MODE\""
178	}
179
180	## Output the USB part of our udev rule. This is redirected to the right file.
181	udev_write_usb() {
182	INSTALLATION_DIR="$1"
183	USB_GROUP="$2"
184
185	echo "SUBSYSTEM==\"usb_device\", ACTION==\"add\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
186	echo "SUBSYSTEM==\"usb\", ACTION==\"add\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh \$major \$minor \$attr{bDeviceClass}${USB_GROUP}\""
187	echo "SUBSYSTEM==\"usb_device\", ACTION==\"remove\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
188	echo "SUBSYSTEM==\"usb\", ACTION==\"remove\", ENV{DEVTYPE}==\"usb_device\", RUN+=\"$INSTALLATION_DIR/VBoxCreateUSBNode.sh --remove \$major \$minor\""
189	}
190
191	## Generate our udev rule file. This takes a change in udev rule syntax in
192	## version 55 into account. It only creates rules for USB for udev versions
193	## recent enough to support USB device nodes.
194	generate_udev_rule() {
195	VBOXDRV_GRP="$1" # The group owning the vboxdrv device
196	VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
197	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
198	USB_GROUP="$4" # The group that has permission to access USB devices
199	NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
200
201	# Extra space!
202	case "$USB_GROUP" in ?*) USB_GROUP=" $USB_GROUP" ;; esac
203	case "$NO_INSTALL" in "1") return ;; esac
204	udev_write_vboxdrv "$VBOXDRV_GRP" "$VBOXDRV_MODE"
205	udev_write_usb "$INSTALLATION_DIR" "$USB_GROUP"
206	}
207
208	## Install udev rule (disable with INSTALL_NO_UDEV=1 in
209	## /etc/default/virtualbox).
210	install_udev() {
211	VBOXDRV_GRP="$1" # The group owning the vboxdrv device
212	VBOXDRV_MODE="$2" # The access mode for the vboxdrv device
213	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
214	USB_GROUP="$4" # The group that has permission to access USB devices
215	NO_INSTALL="$5" # Set this to "1" to remove but not re-install rules
216
217	if test -d /etc/udev/rules.d; then
218	generate_udev_rule "$VBOXDRV_GRP" "$VBOXDRV_MODE" "$INSTALLATION_DIR" \
219	"$USB_GROUP" "$NO_INSTALL"
220	fi
221	# Remove old udev description file
222	rm -f /etc/udev/rules.d/10-vboxdrv.rules 2> /dev/null
223	}
224
225	## Create a usb device node for a given sysfs path to a USB device.
226	install_create_usb_node_for_sysfs() {
227	path="$1" # sysfs path for the device
228	usb_createnode="$2" # Path to the USB device node creation script
229	usb_group="$3" # The group to give ownership of the node to
230	if test -r "${path}/dev"; then
231	dev="`cat "${path}/dev" 2> /dev/null`"
232	major="`expr "$dev" : '$.*$:' 2> /dev/null`"
233	minor="`expr "$dev" : '.:$.$' 2> /dev/null`"
234	class="`cat ${path}/bDeviceClass 2> /dev/null`"
235	sh "${usb_createnode}" "$major" "$minor" "$class" \
236	"${usb_group}" 2>/dev/null
237	fi
238	}
239
240	udev_rule_file=/etc/udev/rules.d/60-vboxdrv.rules
241	sysfs_usb_devices="/sys/bus/usb/devices/*"
242
243	## Install udev rules and create device nodes for usb access
244	setup_usb() {
245	VBOXDRV_GRP="$1" # The group that should own /dev/vboxdrv
246	VBOXDRV_MODE="$2" # The mode to be used for /dev/vboxdrv
247	INSTALLATION_DIR="$3" # The directory VirtualBox is installed in
248	USB_GROUP="$4" # The group that should own the /dev/vboxusb device
249	# nodes unless INSTALL_NO_GROUP=1 in
250	# /etc/default/virtualbox. Optional.
251	usb_createnode="$INSTALLATION_DIR/VBoxCreateUSBNode.sh"
252	# install udev rule (disable with INSTALL_NO_UDEV=1 in
253	# /etc/default/virtualbox)
254	if [ "$INSTALL_NO_GROUP" != "1" ]; then
255	usb_group=$USB_GROUP
256	vboxdrv_group=$VBOXDRV_GRP
257	else
258	usb_group=root
259	vboxdrv_group=root
260	fi
261	install_udev "${vboxdrv_group}" "$VBOXDRV_MODE" \
262	"$INSTALLATION_DIR" "${usb_group}" \
263	"$INSTALL_NO_UDEV" > ${udev_rule_file}
264	# Build our device tree
265	for i in ${sysfs_usb_devices}; do # This line intentionally without quotes.
266	install_create_usb_node_for_sysfs "$i" "${usb_createnode}" \
267	"${usb_group}"
268	done
269	}
270
271	cleanup_usb()
272	{
273	# Remove udev description file
274	rm -f /etc/udev/rules.d/60-vboxdrv.rules
275	rm -f /etc/udev/rules.d/10-vboxdrv.rules
276
277	# Remove our USB device tree
278	rm -rf /dev/vboxusb
279	}
280
281	# Returns module version if module is available or empty string.
282	module_version()
283	{
284	mod="$1"
285	[ -n "$mod" ] \|\| return
286
287	modinfo "$mod" 2>/dev/null \| grep -e "^version:" \| tr -s ' ' \| cut -d " " -f2
288	}
289
290	# Returns module revision if module is available in the system or empty string.
291	module_revision()
292	{
293	mod="$1"
294	[ -n "$mod" ] \|\| return
295
296	modinfo "$mod" 2>/dev/null \| grep -e "^version:" \| tr -s ' ' \| cut -d " " -f3
297	}
298
299	# Returns "1" if module is available in the system and its version and revision
300	# number do match to current VirtualBox installation. Or empty string otherwise.
301	module_available()
302	{
303	mod="$1"
304	[ -n "$mod" ] \|\| return
305
306	[ "$VBOX_VERSION" = "$(module_version $mod)" ] \|\| return
307	[ "$VBOX_REVISION" = "$(module_revision $mod)" ] \|\| return
308
309	echo "1"
310	}
311
312	# Check if required modules are installed in the system and versions match.
313	setup_complete()
314	{
315	[ "$(module_available vboxdrv)" = "1" ] \|\| return
316	[ "$(module_available vboxnetflt)" = "1" ] \|\| return
317	[ "$(module_available vboxnetadp)" = "1" ] \|\| return
318
319	# All modules are in place.
320	echo "1"
321	}
322
323	start()
324	{
325	begin_msg "Starting VirtualBox services" console
326	if [ -d /proc/xen ]; then
327	failure "Running VirtualBox in a Xen environment is not supported"
328	fi
329	if test -n "$HAVE_SEC_BOOT" && test -z "$DEB_KEY_ENROLLED"; then
330	if test -n "$HAVE_DEB_KEY"; then
331	begin_msg "You must re-start your system to finish Debian secure boot set-up." console
332	else
333	begin_msg "You must sign these kernel modules before using VirtualBox:
334	$MODULE_LIST
335	See the documenatation for your Linux distribution." console
336	fi
337	fi
338
339	# Check if system already has matching modules installed.
340	[ "$(setup_complete)" = "1" ] \|\| setup
341
342	if ! running vboxdrv; then
343	if ! rm -f $DEVICE; then
344	failure "Cannot remove $DEVICE"
345	fi
346	if ! $MODPROBE vboxdrv > /dev/null 2>&1; then
347	failure "modprobe vboxdrv failed. Please use 'dmesg' to find out why"
348	fi
349	sleep .2
350	fi
351	# ensure the character special exists
352	if [ ! -c $DEVICE ]; then
353	MAJOR=`sed -n 's;$[0-9]\+$ vboxdrv$;\1;p' /proc/devices`
354	if [ ! -z "$MAJOR" ]; then
355	MINOR=0
356	else
357	MINOR=`sed -n 's;$[0-9]\+$ vboxdrv$;\1;p' /proc/misc`
358	if [ ! -z "$MINOR" ]; then
359	MAJOR=10
360	fi
361	fi
362	if [ -z "$MAJOR" ]; then
363	rmmod vboxdrv 2>/dev/null
364	failure "Cannot locate the VirtualBox device"
365	fi
366	if ! mknod -m 0660 $DEVICE c $MAJOR $MINOR 2>/dev/null; then
367	rmmod vboxdrv 2>/dev/null
368	failure "Cannot create device $DEVICE with major $MAJOR and minor $MINOR"
369	fi
370	fi
371	# ensure permissions
372	if ! chown :"${GROUP}" $DEVICE 2>/dev/null; then
373	rmmod vboxpci 2>/dev/null
374	rmmod vboxnetadp 2>/dev/null
375	rmmod vboxnetflt 2>/dev/null
376	rmmod vboxdrv 2>/dev/null
377	failure "Cannot change group ${GROUP} for device $DEVICE"
378	fi
379	if ! $MODPROBE vboxnetflt > /dev/null 2>&1; then
380	failure "modprobe vboxnetflt failed. Please use 'dmesg' to find out why"
381	fi
382	if ! $MODPROBE vboxnetadp > /dev/null 2>&1; then
383	failure "modprobe vboxnetadp failed. Please use 'dmesg' to find out why"
384	fi
385	if test -e "${MODULE_SRC}/vboxpci" && ! $MODPROBE vboxpci > /dev/null 2>&1; then
386	failure "modprobe vboxpci failed. Please use 'dmesg' to find out why"
387	fi
388	# Create the /dev/vboxusb directory if the host supports that method
389	# of USB access. The USB code checks for the existance of that path.
390	if grep -q usb_device /proc/devices; then
391	mkdir -p -m 0750 /dev/vboxusb 2>/dev/null
392	chown root:vboxusers /dev/vboxusb 2>/dev/null
393	fi
394	# Remove any kernel modules left over from previously installed kernels.
395	cleanup only_old
396	succ_msg "VirtualBox services started"
397	}
398
399	stop()
400	{
401	begin_msg "Stopping VirtualBox services" console
402
403	if running vboxpci; then
404	if ! rmmod vboxpci 2>/dev/null; then
405	failure "Cannot unload module vboxpci"
406	fi
407	fi
408	if running vboxnetadp; then
409	if ! rmmod vboxnetadp 2>/dev/null; then
410	failure "Cannot unload module vboxnetadp"
411	fi
412	fi
413	if running vboxdrv; then
414	if running vboxnetflt; then
415	if ! rmmod vboxnetflt 2>/dev/null; then
416	failure "Cannot unload module vboxnetflt"
417	fi
418	fi
419	if ! rmmod vboxdrv 2>/dev/null; then
420	failure "Cannot unload module vboxdrv"
421	fi
422	if ! rm -f $DEVICE; then
423	failure "Cannot unlink $DEVICE"
424	fi
425	fi
426	succ_msg "VirtualBox services stopped"
427	}
428
429	# enter the following variables in /etc/default/virtualbox:
430	# SHUTDOWN_USERS="foo bar"
431	# check for running VMs of user foo and user bar
432	# SHUTDOWN=poweroff
433	# SHUTDOWN=acpibutton
434	# SHUTDOWN=savestate
435	# select one of these shutdown methods for running VMs
436	stop_vms()
437	{
438	wait=0
439	for i in $SHUTDOWN_USERS; do
440	# don't create the ipcd directory with wrong permissions!
441	if [ -d /tmp/.vbox-$i-ipc ]; then
442	export VBOX_IPC_SOCKETID="$i"
443	VMS=`$VBOXMANAGE --nologo list runningvms \| sed -e 's/^".".{$.*$}/\1/' 2>/dev/null`
444	if [ -n "$VMS" ]; then
445	if [ "$SHUTDOWN" = "poweroff" ]; then
446	begin_msg "Powering off remaining VMs"
447	for v in $VMS; do
448	$VBOXMANAGE --nologo controlvm $v poweroff
449	done
450	succ_msg "Remaining VMs powered off"
451	elif [ "$SHUTDOWN" = "acpibutton" ]; then
452	begin_msg "Sending ACPI power button event to remaining VMs"
453	for v in $VMS; do
454	$VBOXMANAGE --nologo controlvm $v acpipowerbutton
455	wait=30
456	done
457	succ_msg "ACPI power button event sent to remaining VMs"
458	elif [ "$SHUTDOWN" = "savestate" ]; then
459	begin_msg "Saving state of remaining VMs"
460	for v in $VMS; do
461	$VBOXMANAGE --nologo controlvm $v savestate
462	done
463	succ_msg "State of remaining VMs saved"
464	fi
465	fi
466	fi
467	done
468	# wait for some seconds when doing ACPI shutdown
469	if [ "$wait" -ne 0 ]; then
470	begin_msg "Waiting for $wait seconds for VM shutdown"
471	sleep $wait
472	succ_msg "Waited for $wait seconds for VM shutdown"
473	fi
474	}
475
476	cleanup()
477	{
478	# If this is set, only remove kernel modules for no longer installed
479	# kernels. Note that only generated kernel modules should be placed
480	# in /lib/modules/*/misc. Anything that we should not remove automatically
481	# should go elsewhere.
482	only_old="${1}"
483	for i in /lib/modules/*; do
484	# Check whether we are only cleaning up for uninstalled kernels.
485	test -n "${only_old}" && test -e "${i}/kernel/drivers" && continue
486	# We could just do "rm -f", but we only want to try deleting folders if
487	# we are sure they were ours, i.e. they had our modules in beforehand.
488	if test -e "${i}/misc/vboxdrv.ko" \
489	\|\| test -e "${i}/misc/vboxnetadp.ko" \
490	\|\| test -e "${i}/misc/vboxnetflt.ko" \
491	\|\| test -e "${i}/misc/vboxpci.ko"; then
492	rm -f "${i}/misc/vboxdrv.ko" "${i}/misc/vboxnetadp.ko" \
493	"${i}/misc/vboxnetflt.ko" "${i}/misc/vboxpci.ko"
494	version=`expr "${i}" : "/lib/modules/$.*$"`
495	depmod -a "${version}"
496	sync
497	fi
498	# Remove the kernel version folder if it was empty except for us.
499	test "`echo ${i}/misc/* ${i}/misc/.?* ${i}/* ${i}/.?*`" \
500	= "${i}/misc/* ${i}/misc/.. ${i}/misc ${i}/.." &&
501	rmdir "${i}/misc" "${i}" # We used to leave empty folders.
502	done
503	}
504
505	# setup_script
506	setup()
507	{
508	begin_msg "Building VirtualBox kernel modules" console
509	log "Building the main VirtualBox module."
510	if ! myerr=`$BUILDINTMP \
511	--save-module-symvers /tmp/vboxdrv-Module.symvers \
512	--module-source "$MODULE_SRC/vboxdrv" \
513	--no-print-directory install 2>&1`; then
514	"${INSTALL_DIR}/check_module_dependencies.sh" \|\| exit 1
515	log "Error building the module:"
516	module_build_log "$myerr"
517	failure "Look at $LOG to find out what went wrong"
518	fi
519	log "Building the net filter module."
520	if ! myerr=`$BUILDINTMP \
521	--use-module-symvers /tmp/vboxdrv-Module.symvers \
522	--module-source "$MODULE_SRC/vboxnetflt" \
523	--no-print-directory install 2>&1`; then
524	log "Error building the module:"
525	module_build_log "$myerr"
526	failure "Look at $LOG to find out what went wrong"
527	fi
528	log "Building the net adaptor module."
529	if ! myerr=`$BUILDINTMP \
530	--use-module-symvers /tmp/vboxdrv-Module.symvers \
531	--module-source "$MODULE_SRC/vboxnetadp" \
532	--no-print-directory install 2>&1`; then
533	log "Error building the module:"
534	module_build_log "$myerr"
535	failure "Look at $LOG to find out what went wrong"
536	fi
537	if test -e "$MODULE_SRC/vboxpci"; then
538	log "Building the PCI pass-through module."
539	if ! myerr=`$BUILDINTMP \
540	--use-module-symvers /tmp/vboxdrv-Module.symvers \
541	--module-source "$MODULE_SRC/vboxpci" \
542	--no-print-directory install 2>&1`; then
543	log "Error building the module:"
544	module_build_log "$myerr"
545	failure "Look at $LOG to find out what went wrong"
546	fi
547	fi
548	rm -f /etc/vbox/module_not_compiled
549	depmod -a
550	sync
551	succ_msg "VirtualBox kernel modules built"
552	# Secure boot on Ubuntu and Debian.
553	if test -n "$HAVE_SEC_BOOT" &&
554	type update-secureboot-policy >/dev/null 2>&1; then
555	SHIM_NOTRIGGER=y update-secureboot-policy --new-key
556	fi
557	if test -f "$DEB_PUB_KEY" && test -f "$DEB_PRIV_KEY"; then
558	HAVE_DEB_KEY=true
559	for i in $MODULE_LIST; do
560	kmodsign sha512 /var/lib/shim-signed/mok/MOK.priv \
561	/var/lib/shim-signed/mok/MOK.der \
562	/lib/modules/"$KERN_VER"/misc/"$i".ko
563	done
564	# update-secureboot-policy "expects" DKMS modules.
565	# Work around this and talk to the authors as soon
566	# as possible to fix it.
567	mkdir -p /var/lib/dkms/vbox-temp
568	update-secureboot-policy --enroll-key 2>/dev/null \|\|
569	begin_msg "Failed to enroll secure boot key." console
570	rmdir -p /var/lib/dkms/vbox-temp 2>/dev/null
571	fi
572	}
573
574	dmnstatus()
575	{
576	if running vboxdrv; then
577	str="vboxdrv"
578	if running vboxnetflt; then
579	str="$str, vboxnetflt"
580	if running vboxnetadp; then
581	str="$str, vboxnetadp"
582	fi
583	fi
584	if running vboxpci; then
585	str="$str, vboxpci"
586	fi
587	echo "VirtualBox kernel modules ($str) are loaded."
588	for i in $SHUTDOWN_USERS; do
589	# don't create the ipcd directory with wrong permissions!
590	if [ -d /tmp/.vbox-$i-ipc ]; then
591	export VBOX_IPC_SOCKETID="$i"
592	VMS=`$VBOXMANAGE --nologo list runningvms \| sed -e 's/^".".{$.*$}/\1/' 2>/dev/null`
593	if [ -n "$VMS" ]; then
594	echo "The following VMs are currently running:"
595	for v in $VMS; do
596	echo " $v"
597	done
598	fi
599	fi
600	done
601	else
602	echo "VirtualBox kernel module is not loaded."
603	fi
604	}
605
606	case "$1" in
607	start)
608	start
609	;;
610	stop)
611	stop_vms
612	stop
613	;;
614	stop_vms)
615	stop_vms
616	;;
617	restart)
618	stop && start
619	;;
620	setup)
621	test -n "${2}" && export KERN_VER="${2}"
622	# Create udev rule and USB device nodes.
623	## todo Wouldn't it make more sense to install the rule to /lib/udev? This
624	## is not a user-created configuration file after all.
625	## todo Do we need a udev rule to create /dev/vboxdrv[u] at all? We have
626	## working fall-back code here anyway, and the "right" code is more complex
627	## than the fall-back. Unnecessary duplication?
628	stop && cleanup
629	setup_usb "$GROUP" "$DEVICE_MODE" "$INSTALL_DIR"
630	start
631	;;
632	cleanup)
633	stop && cleanup
634	cleanup_usb
635	;;
636	force-reload)
637	stop
638	start
639	;;
640	status)
641	dmnstatus
642	;;
643	*)
644	echo "Usage: $0 {start\|stop\|stop_vms\|restart\|setup\|cleanup\|force-reload\|status}"
645	exit 1
646	esac
647
648	exit 0

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Installer/linux/vboxdrv.sh@ 89158

Download in other formats: