#!/bin/sh
# $Id: vboxconfig.sh 31421 2010-08-05 19:44:36Z vboxsync $

# Sun VirtualBox
# VirtualBox Configuration Script, Solaris host.
#
# Copyright (C) 2009 Oracle Corporation
#
# This file is part of VirtualBox Open Source Edition (OSE), as
# available from http://www.virtualbox.org. This file is free software;
# you can redistribute it and/or modify it under the terms of the GNU
# General Public License (GPL) as published by the Free Software
# Foundation, in version 2 as it comes in the "COPYING" file of the
# VirtualBox OSE distribution. VirtualBox OSE is distributed in the
# hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
#

# Never use exit 2 or exit 20 etc., the return codes are used in
# SRv4 postinstall procedures which carry special meaning. Just use exit 1 for failure.

# S10 or OpenSoalris
HOST_OS_MAJORVERSION=`uname -r`
# Which OpenSolaris version (snv_xxx)?
HOST_OS_MINORVERSION=`uname -v | grep 'snv' | sed -e "s/snv_//" -e "s/[^0-9]//"`

DIR_VBOXBASE=${BASEDIR}/opt/VirtualBox
DIR_CONF="${BASEDIR}/platform/i86pc/kernel/drv"
DIR_MOD_32="${BASEDIR}/platform/i86pc/kernel/drv"
DIR_MOD_64=$DIR_MOD_32/amd64

BIN_ADDDRV=/usr/sbin/add_drv
BIN_REMDRV=/usr/sbin/rem_drv
BIN_MODLOAD=/usr/sbin/modload
BIN_MODUNLOAD=/usr/sbin/modunload
BIN_MODINFO=/usr/sbin/modinfo
BIN_DEVFSADM=/usr/sbin/devfsadm
BIN_BOOTADM=/sbin/bootadm
BIN_SVCADM=/usr/sbin/svcadm
BIN_SVCCFG=/usr/sbin/svccfg
BIN_IFCONFIG=/sbin/ifconfig
BIN_SVCS=/usr/bin/svcs
BIN_ID=/usr/bin/id

# "vboxdrv" is also used in sed lines here (change those as well if it ever changes)
MOD_VBOXDRV=vboxdrv
DESC_VBOXDRV="Host"

MOD_VBOXNET=vboxnet
DESC_VBOXNET="NetAdapter"
MOD_VBOXNET_INST=32

MOD_VBOXFLT=vboxflt
DESC_VBOXFLT="NetFilter"

# No Separate VBI since (3.1)
#MOD_VBI=vbi
#DESC_VBI="Kernel Interface"

MOD_VBOXUSBMON=vboxusbmon
DESC_VBOXUSBMON="USBMonitor"

MOD_VBOXUSB=vboxusb
DESC_VBOXUSB="USB"

REMOTEINST=0
FATALOP=fatal
NULLOP=nulloutput
SILENTOP=silent
IPSOP=ips
ISSILENT=
ISIPS=

infoprint()
{
    if test "$ISSILENT" != "$SILENTOP"; then
        echo 1>&2 "$1"
    fi
}

subprint()
{
    if test "$ISSILENT" != "$SILENTOP"; then
        echo 1>&2 "   - $1"
    fi
}

warnprint()
{
    if test "$ISSILENT" != "$SILENTOP"; then
        echo 1>&2 "   * Warning!! $1"
    fi
}

errorprint()
{
    echo 1>&2 "## $1"
}


# print_bin_path()
# !! failure is always fatal
find_bin_path()
{
    binfilename=`basename $1`
    binfilepath=`which $binfilename 2> /dev/null`
    if test -x "$binfilepath"; then
        echo "$binfilepath"
        return 0
    else
        errorprint "$1, $2 missing or is not an executable"
        exit 1
    fi
}

# find_bins()
# !! failure is always fatal
find_bins()
{
    # Search only for binaries that might be in different locations
    if test ! -x "$BIN_ID"; then
        BIN_ID=`find_bin_path "$BIN_ID"`
    fi

    if test ! -x "$BIN_ADDDRV"; then
        BIN_ADDDRV=`find_bin_path "$BIN_ADDDRV"`
    fi

    if test ! -x "$BIN_REMDRV"; then
        BIN_REMDRV=`find_bin_path "$BIN_REMDRV"`
    fi

    if test ! -x "$BIN_MODLOAD"; then
        BIN_MODLOAD=`check_bin_path "$BIN_MODLOAD"`
    fi

    if test ! -x "$BIN_MODUNLOAD"; then
        BIN_MODUNLOAD=`find_bin_path "$BIN_MODUNLOAD"`
    fi

    if test ! -x "$BIN_MODINFO"; then
        BIN_MODINFO=`find_bin_path "$BIN_MODINFO"`
    fi

    if test ! -x "$BIN_DEVFSADM"; then
        BIN_DEVFSADM=`find_bin_path "$BIN_DEVFSADM"`
    fi

    if test ! -x "$BIN_BOOTADM"; then
        BIN_BOOTADM=`find_bin_path "$BIN_BOOTADM"`
    fi

    if test ! -x "$BIN_BOOTADM"; then
        BIN_SVCADM=`find_bin_path "$BIN_BOOTADM"`
    fi

    if test ! -x "$BIN_SVCCFG"; then
        BIN_SVCCFG=`find_bin_path "$BIN_SVCCFG"`
    fi

    if test ! -x "$BIN_SVCS"; then
        BIN_SVCS=`find_bin_path "$BIN_SVCS"`
    fi

    if test ! -x "$BIN_IFCONFIG"; then
        BIN_IFCONFIG=`find_bin_path "$BIN_IFCONFIG"`
    fi
}

# check_root()
# !! failure is always fatal
check_root()
{
    # Don't use "-u" option as some id binaries don't support it, instead
    # rely on "uid=101(username) gid=10(groupname) groups=10(staff)" output
    curuid=`$BIN_ID | cut -f 2 -d '=' | cut -f 1 -d '('`
    if test "$curuid" -ne 0; then
        errorprint "This script must be run with administrator privileges."
        exit 1
    fi
}

# get_sysinfo
# cannot fail
get_sysinfo()
{
    if test "$REMOTEINST" -eq 1 || test -z "$HOST_OS_MINORVERSION" || test -z "$HOST_OS_MAJORVERSION"; then
        if test -f "${BASEDIR}/etc/release"; then
            HOST_OS_MAJORVERSION=`cat ${BASEDIR}/etc/release | grep "Solaris 10"`
            if test -n "$HOST_OS_MAJORVERSION"; then
                HOST_OS_MAJORVERSION="5.10"
            else
                HOST_OS_MAJORVERSION=`cat ${BASEDIR}/etc/release | grep "snv_"`
                if test -n "$HOST_OS_MAJORVERSION"; then
                    HOST_OS_MAJORVERSION="5.11"
                fi
            fi
            if test "$HOST_OS_MAJORVERSION" != "5.10"; then
                HOST_OS_MINORVERSION=`cat ${BASEDIR}/etc/release | tr ' ' '\n' | grep 'snv_' | sed -e "s/snv_//" -e "s/[^0-9]//"`
            else
                HOST_OS_MINORVERSION=""
            fi
        else
            HOST_OS_MAJORVERSION=""
            HOST_OS_MINORVERSION=""
        fi
    fi
}

# check_zone()
# !! failure is always fatal
check_zone()
{
    currentzone=`zonename`
    if test "$currentzone" != "global"; then
        errorprint "This script must be run from the global zone."
        exit 1
    fi
}

# check_isa()
# !! failure is always fatal
check_isa()
{
    currentisa=`uname -i`
    if test "$currentisa" = "i86xpv"; then
        errorprint "VirtualBox cannot run under xVM Dom0! Fatal Error, Aborting installation!"
        exit 1
    fi
}

# check_module_arch()
# !! failure is always fatal
check_module_arch()
{
    cputype=`isainfo -k`
    if test "$cputype" != "amd64" && test "$cputype" != "i386"; then
        errorprint "VirtualBox works only on i386/amd64 hosts, not $cputype"
        exit 1
    fi
}

# module_added(modname)
# returns 1 if added, 0 otherwise
module_added()
{
    if test -z "$1"; then
        errorprint "missing argument to module_added()"
        exit 1
    fi

    # Add a space at end of module name to make sure we have a perfect match to avoid
    # any substring matches: e.g "vboxusb" & "vbo $BASEDIR_OPT xusbmon"
    loadentry=`cat ${BASEDIR}/etc/name_to_major | grep "$1 "`
    if test -z "$loadentry"; then
        return 1
    fi
    return 0
}

# module_loaded(modname)
# returns 1 if loaded, 0 otherwise
module_loaded()
{
    if test -z "$1"; then
        errorprint "missing argument to module_loaded()"
        exit 1
    fi

    modname=$1
    # modinfo should now work properly since we prevent module autounloading.
    loadentry=`$BIN_MODINFO | grep "$modname "`
    if test -z "$loadentry"; then
        return 1
    fi
    return 0
}

# add_driver(modname, moddesc, fatal, nulloutput, [driverperm])
# failure: depends on "fatal"
add_driver()
{
    if test -z "$1" || test -z "$2"; then
        errorprint "missing argument to add_driver()"
        exit 1
    fi

    modname="$1"
    moddesc="$2"
    fatal="$3"
    nullop="$4"
    modperm="$5"

    if test -n "$modperm"; then
        if test "$nullop" = "$NULLOP"; then
            $BIN_ADDDRV $BASEDIR_OPT -m"$modperm" $modname  >/dev/null 2>&1
        else
            $BIN_ADDDRV $BASEDIR_OPT -m"$modperm" $modname
        fi
    else
        if test "$nullop" = "$NULLOP"; then
            $BIN_ADDDRV $BASEDIR_OPT $modname >/dev/null 2>&1
        else
            $BIN_ADDDRV $BASEDIR_OPT $modname
        fi
    fi

    if test $? -ne 0; then
        subprint "Adding: $moddesc module ...FAILED!"
        if test "$fatal" = "$FATALOP"; then
            exit 1
        fi
        return 1
    elif test "$REMOTEINST" -eq 1 && test "$?" -eq 0; then
        subprint "Added: $moddesc driver"
    fi
    return 0
}

# rem_driver(modname, moddesc, [fatal])
# failure: depends on [fatal]
rem_driver()
{
    if test -z "$1" || test -z "$2"; then
        errorprint "missing argument to rem_driver()"
        exit 1
    fi

    modname=$1
    moddesc=$2
    fatal=$3

    module_added $modname
    if test "$?" -eq 0; then
        if test "$ISIPS" != "$IPSOP"; then
            $BIN_REMDRV $BASEDIR_OPT $modname
        else
            $BIN_REMDRV $BASEDIR_OPT $modname >/dev/null 2>&1
        fi
        # for remote installs, don't bother with return values of rem_drv
        if test $? -eq 0; then
            subprint "Removed: $moddesc module"
            return 0
        else
            subprint "Removing: $moddesc  ...FAILED!"
            if test "$fatal" = "$FATALOP"; then
                exit 1
            fi
            return 1
        fi
    fi
}

# unload_module(modname, moddesc, [fatal])
# failure: fatal
unload_module()
{
    if test -z "$1" || test -z "$2"; then
        errorprint "missing argument to unload_module()"
        exit 1
    fi

    # No-OP for non-root installs
    if test "$REMOTEINST" -eq 1; then
        return 0
    fi

    modname=$1
    moddesc=$2
    fatal=$3
    modid=`$BIN_MODINFO | grep "$modname " | cut -f 1 -d ' ' `
    if test -n "$modid"; then
        $BIN_MODUNLOAD -i $modid
        if test $? -eq 0; then
            subprint "Unloaded: $moddesc module"
        else
            subprint "Unloading: $moddesc module ...FAILED!"
            if test "$fatal" = "$FATALOP"; then
                exit 1
            fi
            return 1
        fi
    fi
    return 0
}

# load_module(modname, moddesc, [fatal])
# pass "drv/modname" or "misc/vbi" etc.
# failure: fatal
load_module()
{
    if test -z "$1" || test -z "$2"; then
        errorprint "missing argument to load_module()"
        exit 1
    fi

    # No-OP for non-root installs
    if test "$REMOTEINST" -eq 1; then
        return 0
    fi

    modname=$1
    moddesc=$2
    fatal=$3
    $BIN_MODLOAD -p $modname
    if test $? -eq 0; then
        subprint "Loaded: $moddesc module"
        return 0
    else
        subprint "Loading: $moddesc  ...FAILED!"
        if test "$fatal" = "$FATALOP"; then
            exit 1
        fi
        return 1
    fi
}

# install_drivers()
# !! failure is always fatal
install_drivers()
{
    if test -f "$DIR_CONF/vboxdrv.conf"; then
        if test -n "_HARDENED_"; then
            add_driver "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$FATALOP" "not-$NULLOP" "'* 0600 root sys'"
        else
            add_driver "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$FATALOP" "not-$NULLOP" "'* 0666 root sys'"
        fi
        load_module "drv/$MOD_VBOXDRV" "$DESC_VBOXDRV" "$FATALOP"
    else
        errorprint "Extreme error! Missing $DIR_CONF/vboxdrv.conf, aborting."
        return 1
    fi

    # Add vboxdrv to devlink.tab
    if test -f "${BASEDIR}/etc/devlink.tab"; then
        sed -e '/name=vboxdrv/d' ${BASEDIR}/etc/devlink.tab > ${BASEDIR}/etc/devlink.vbox
        echo "type=ddi_pseudo;name=vboxdrv	\D" >> ${BASEDIR}/etc/devlink.vbox
        mv -f ${BASEDIR}/etc/devlink.vbox ${BASEDIR}/etc/devlink.tab
    else
        errorprint "Missing ${BASEDIR}/etc/devlink.tab, aborting install"
        return 1
    fi

    # Create the device link for non-remote installs
    if test "$REMOTEINST" -eq 0; then
        /usr/sbin/devfsadm -i "$MOD_VBOXDRV"
        if test $? -ne 0 || test ! -h "/dev/vboxdrv"; then
            errorprint "Failed to create device link for $MOD_VBOXDRV."
            exit 1
        fi
    fi

    # Load VBoxNetAdp
    if test -f "$DIR_CONF/vboxnet.conf"; then
        add_driver "$MOD_VBOXNET" "$DESC_VBOXNET" "$FATALOP"
        load_module "drv/$MOD_VBOXNET" "$DESC_VBOXNET" "$FATALOP"
    fi

    # Load VBoxNetFlt
    if test -f "$DIR_CONF/vboxflt.conf"; then
        add_driver "$MOD_VBOXFLT" "$DESC_VBOXFLT" "$FATALOP"
        load_module "drv/$MOD_VBOXFLT" "$DESC_VBOXFLT" "$FATALOP"
    fi

    # Load VBoxUSBMon, VBoxUSB
    if test -f "$DIR_CONF/vboxusbmon.conf" && test "$HOST_OS_MAJORVERSION" != "5.10"; then
        # For VirtualBox 3.1 the new USB code requires Nevada > 123
        if test "$HOST_OS_MINORVERSION" -gt 123; then
            add_driver "$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$FATALOP" "not-$NULLOP" "'* 0666 root sys'"
            load_module "drv/$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$FATALOP"

            # Add vboxusbmon to devlink.tab
            sed -e '/name=vboxusbmon/d' ${BASEDIR}/etc/devlink.tab > ${BASEDIR}/etc/devlink.vbox
            echo "type=ddi_pseudo;name=vboxusbmon	\D" >> ${BASEDIR}/etc/devlink.vbox
            mv -f ${BASEDIR}/etc/devlink.vbox ${BASEDIR}/etc/devlink.tab

            # Create the device link for non-remote installs
            if test "$REMOTEINST" -eq 0; then
                /usr/sbin/devfsadm -i  "$MOD_VBOXUSBMON"
                if test $? -ne 0; then
                    errorprint "Failed to create device link for $MOD_VBOXUSBMON."
                    exit 1
                fi
            fi

            # Add vboxusb if present
            # This driver is special, we need it in the boot-archive but since there is no
            # USB device to attach to now (it's done at runtime) it will fail to attach so
            # redirect attaching failure output to /dev/null
            if test -f "$DIR_CONF/vboxusb.conf"; then
                add_driver "$MOD_VBOXUSB" "$DESC_VBOXUSB" "$FATALOP" "$NULLOP"
                load_module "drv/$MOD_VBOXUSB" "$DESC_VBOXUSB" "$FATALOP"
            fi
        else
            if test -n "$HOST_OS_MINORVERSION"; then
                warnprint "Solaris 5.11 snv_124 or higher required for USB support. Skipped installing USB support."
            else
                warnprint "Failed to determine Solaris 5.11 snv version. Skipped installing USB support."
            fi
        fi
    fi

    return $?
}

# remove_all([fatal])
# failure: depends on [fatal]
remove_drivers()
{
    fatal=$1

    # Remove vboxdrv from devlink.tab
    if test -f ${BASEDIR}/etc/devlink.tab; then
        devlinkfound=`cat ${BASEDIR}/etc/devlink.tab | grep vboxdrv`
        if test -n "$devlinkfound"; then
            sed -e '/name=vboxdrv/d' ${BASEDIR}/etc/devlink.tab > ${BASEDIR}/etc/devlink.vbox
            mv -f ${BASEDIR}/etc/devlink.vbox ${BASEDIR}/etc/devlink.tab
        fi

        # Remove vboxusbmon from devlink.tab
        devlinkfound=`cat ${BASEDIR}/etc/devlink.tab | grep vboxusbmon`
        if test -n "$devlinkfound"; then
            sed -e '/name=vboxusbmon/d' ${BASEDIR}/etc/devlink.tab > ${BASEDIR}/etc/devlink.vbox
            mv -f ${BASEDIR}/etc/devlink.vbox ${BASEDIR}/etc/devlink.tab
        fi
    fi

    unload_module "$MOD_VBOXUSB" "$DESC_VBOXUSB" "$fatal"
    rem_driver "$MOD_VBOXUSB" "$DESC_VBOXUSB" "$fatal"

    unload_module "$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$fatal"
    rem_driver "$MOD_VBOXUSBMON" "$DESC_VBOXUSBMON" "$fatal"

    unload_module "$MOD_VBOXFLT" "$DESC_VBOXFLT" "$fatal"
    rem_driver "$MOD_VBOXFLT" "$DESC_VBOXFLT" "$fatal"

    unload_module "$MOD_VBOXNET" "$DESC_VBOXNET" "$fatal"
    rem_driver "$MOD_VBOXNET" "$DESC_VBOXNET" "$fatal"

    unload_module "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$fatal"
    rem_driver "$MOD_VBOXDRV" "$DESC_VBOXDRV" "$fatal"

# No separate VBI since 3.1
#    unload_module "$MOD_VBI" "$DESC_VBI" "$fatal"

    # remove devlinks
    if test -h "${BASEDIR}/dev/vboxdrv" || test -f "${BASEDIR}/dev/vboxdrv"; then
        rm -f ${BASEDIR}/dev/vboxdrv
    fi
    if test -h "${BASEDIR}/dev/vboxusbmon" || test -f "${BASEDIR}/dev/vboxusbmon"; then
        rm -f ${BASEDIR}/dev/vboxusbmon
    fi

    # unpatch nwam/dhcpagent fix
    nwamfile=${BASEDIR}/etc/nwam/llp
    nwambackupfile=$nwamfile.vbox
    if test -f "$nwamfile"; then
        sed -e '/vboxnet/d' $nwamfile > $nwambackupfile
        mv -f $nwambackupfile $nwamfile
    fi

    # remove netmask configuration
    nmaskfile=${BASEDIR}/etc/netmasks
    nmaskbackupfile=$nmaskfile.vbox
    if test -f "$nmaskfile"; then
        sed -e '/#VirtualBox_SectionStart/,/#VirtualBox_SectionEnd/d' $nmaskfile > $nmaskbackupfile
        mv -f $nmaskbackupfile $nmaskfile
    fi

    return 0
}

# install_python_bindings(pythonbin)
# remarks: changes pwd
# failure: non fatal
install_python_bindings()
{
    # The python binary might not be there, so just exit silently
    if test -z "$1"; then
        return 0
    fi

    if test -z "$2"; then
        errorprint "missing argument to install_python_bindings"
        exit 1
    fi

    pythonbin=$1
    pythondesc=$2
    if test -x "$pythonbin"; then
        VBOX_INSTALL_PATH="$DIR_VBOXBASE"
        export VBOX_INSTALL_PATH
        cd $DIR_VBOXBASE/sdk/installer
        $pythonbin ./vboxapisetup.py install > /dev/null
        if test "$?" -eq 0; then
            subprint "Installed: Bindings for $pythondesc"
        fi
        return 0
    fi
    return 1
}


# cleanup_install([fatal])
# failure: depends on [fatal]
cleanup_install()
{
    fatal=$1

    # No-Op for remote installs
    if test "$REMOTEINST" -eq 1; then
        return 0
    fi

    # stop webservice
    servicefound=`$BIN_SVCS -a | grep "virtualbox/webservice" 2>/dev/null`
    if test ! -z "$servicefound"; then
        $BIN_SVCADM disable -s svc:/application/virtualbox/webservice:default
        # Don't delete the manifest, this is handled by the manifest class action
        # $BIN_SVCCFG delete svc:/application/virtualbox/webservice:default
        if test "$?" -eq 0; then
            subprint "Unloaded: Web service"
        else
            subprint "Unloading: Web service  ...ERROR(S)."
        fi
    fi

    # stop zoneaccess service
    servicefound=`$BIN_SVCS -a | grep "virtualbox/zoneaccess" 2>/dev/null`
    if test ! -z "$servicefound"; then
        $BIN_SVCADM disable -s svc:/application/virtualbox/zoneaccess
        # Don't delete the manifest, this is handled by the manifest class action
        # $BIN_SVCCFG delete svc:/application/virtualbox/zoneaccess
        if test "$?" -eq 0; then
            subprint "Unloaded: Zone access service"
        else
            subprint "Unloading: Zone access service  ...ERROR(S)."
        fi
    fi

    # unplumb all vboxnet instances for non-remote installs
    inst=0
    while test $inst -ne $MOD_VBOXNET_INST; do
        vboxnetup=`$BIN_IFCONFIG vboxnet$inst >/dev/null 2>&1`
        if test "$?" -eq 0; then
            $BIN_IFCONFIG vboxnet$inst unplumb
            if test "$?" -ne 0; then
                errorprint "VirtualBox NetAdapter 'vboxnet$inst' couldn't be unplumbed (probably in use)."
                if test "$fatal" = "$FATALOP"; then
                    exit 1
                fi
            fi
        fi

        # unplumb vboxnet0 ipv6
        vboxnetup=`$BIN_IFCONFIG vboxnet$inst inet6 >/dev/null 2>&1`
        if test "$?" -eq 0; then
            $BIN_IFCONFIG vboxnet$inst inet6 unplumb
            if test "$?" -ne 0; then
                errorprint "VirtualBox NetAdapter 'vboxnet$inst' IPv6 couldn't be unplumbed (probably in use)."
                if test "$fatal" = "$FATALOP"; then
                    exit 1
                fi
            fi
        fi

        inst=`expr $inst + 1`
    done
}


# postinstall()
# !! failure is always fatal
postinstall()
{
    infoprint "Loading VirtualBox kernel modules..."
    install_drivers

    if test "$?" -eq 0; then
        if test -f "$DIR_CONF/vboxnet.conf"; then
            # nwam/dhcpagent fix
            nwamfile=${BASEDIR}/etc/nwam/llp
            nwambackupfile=$nwamfile.vbox
            if test -f "$nwamfile"; then
                sed -e '/vboxnet/d' $nwamfile > $nwambackupfile

                # add all vboxnet instances as static to nwam
                inst=0
                networkn=56
                while test $inst -ne 1; do
                    echo "vboxnet$inst	static 192.168.$networkn.1" >> $nwambackupfile
                    inst=`expr $inst + 1`
                    networkn=`expr $networkn + 1`
                done
                mv -f $nwambackupfile $nwamfile
            fi

            # plumb and configure vboxnet0 for non-remote installs
            if test "$REMOTEINST" -eq 0; then
                $BIN_IFCONFIG vboxnet0 plumb up
                if test "$?" -eq 0; then
                    $BIN_IFCONFIG vboxnet0 192.168.56.1 netmask 255.255.255.0 up

                    # add the netmask to stay persistent across host reboots
                    nmaskfile=${BASEDIR}/etc/netmasks
                    nmaskbackupfile=$nmaskfile.vbox
                    if test -f $nmaskfile; then
                        sed -e '/#VirtualBox_SectionStart/,/#VirtualBox_SectionEnd/d' $nmaskfile > $nmaskbackupfile
                        echo "#VirtualBox_SectionStart" >> $nmaskbackupfile
                        inst=0
                        networkn=56
                        while test $inst -ne 1; do
                            echo "192.168.$networkn.0 255.255.255.0" >> $nmaskbackupfile
                            inst=`expr $inst + 1`
                            networkn=`expr $networkn + 1`
                        done
                        echo "#VirtualBox_SectionEnd" >> $nmaskbackupfile
                        mv -f $nmaskbackupfile $nmaskfile
                    fi
                else
                    # Should this be fatal?
                    warnprint "Failed to bring up vboxnet0!!"
                fi
            fi
        fi

        if test -f ${BASEDIR}/var/svc/manifest/application/virtualbox/virtualbox-webservice.xml || test -f ${BASEDIR}/var/svc/manifest/application/virtualbox/virtualbox-zoneaccess.xml; then
            infoprint "Configuring services..."
            if test "$REMOTEINST" -eq 1; then
                subprint "Skipped for targetted installs."
            fi
        fi

        # Enable Zone access service for non-remote installs, other services (Webservice) are delivered disabled by the manifest class action
        if test "$REMOTEINST" -eq 0; then
            servicefound=`$BIN_SVCS -a | grep "virtualbox/zoneaccess" | grep "disabled" 2>/dev/null`
            if test ! -z "$servicefound"; then
                /usr/sbin/svcadm enable -s svc:/application/virtualbox/zoneaccess
                if test "$?" -eq 0; then
                    subprint "Loaded: Zone access service"
                else
                    subprint "Loading Zone access service  ...FAILED."
                fi
            fi
        fi

        # Install python bindings for non-remote installs
        if test "$REMOTEINST" -eq 0; then
            if test -f "$DIR_VBOXBASE/sdk/installer/vboxapisetup.py" || test -h "$DIR_VBOXBASE/sdk/installer/vboxapisetup.py"; then
                PYTHONBIN=`which python 2> /dev/null`
                if test -f "$PYTHONBIN" || test -h "$PYTHONBIN"; then
                    infoprint "Installing Python bindings..."

                    INSTALLEDIT=1
                    PYTHONBIN=`which python2.4 2>/dev/null`
                    install_python_bindings "$PYTHONBIN" "Python 2.4"
                    if test "$?" -eq 0; then
                        INSTALLEDIT=0
                    fi
                    PYTHONBIN=`which python2.5 2>/dev/null`
                    install_python_bindings "$PYTHONBIN"  "Python 2.5"
                    if test "$?" -eq 0; then
                        INSTALLEDIT=0
                    fi
                    PYTHONBIN=`which python2.6 2>/dev/null`
                    install_python_bindings "$PYTHONBIN" "Python 2.6"
                    if test "$?" -eq 0; then
                        INSTALLEDIT=0
                    fi

                    # remove files installed by Python build
                    rm -rf $DIR_VBOXBASE/sdk/installer/build

                    if test "$INSTALLEDIT" -ne 0; then
                        warnprint "No suitable Python version found. Required Python 2.4, 2.5 or 2.6."
                        warnprint "Skipped installing the Python bindings."
                    fi
                else
                    warnprint "Python not found, skipped installed Python bindings."
                fi
            fi
        else
            warnprint "Skipped installing Python bindings. Run, as root, 'vboxapisetup.py install' manually from the booted system."
        fi

        # Update boot archive
        infoprint "Updating the boot archive..."
        if test "$REMOTEINST" -eq 0; then
            $BIN_BOOTADM update-archive > /dev/null
        else
            $BIN_BOOTADM update-archive -R ${BASEDIR} > /dev/null
        fi

        return 0
    else
        errorprint "Failed to install drivers"
        exit 666
    fi
    return 1
}

# preremove([fatal])
# failure: depends on [fatal]
preremove()
{
    fatal=$1

    cleanup_install "$fatal"

    remove_drivers "$fatal"
    if test "$?" -eq 0; then
        return 0;
    fi
    return 1
}



# And it begins...
find_bins
check_root
check_isa
check_zone
get_sysinfo

if test "x${BASEDIR:=/}" != "x/"; then
    BASEDIR_OPT="-b ${BASEDIR}"
    REMOTEINST=1
fi

# Get command line options
while test $# -gt 0;
do
    case "$1" in
        --postinstall | --preremove | --installdrivers | --removedrivers | --setupdrivers)
            drvop="$1"
            ;;
        --fatal)
            fatal="$FATALOP"
            ;;
        --silent)
            ISSILENT="$SILENTOP"
            ;;
        --ips)
            ISIPS="$IPSOP"
            ;;
        --altkerndir)
            # Use alternate kernel driver config folder (dev only)
            DIR_CONF="/usr/kernel/drv"
            ;;
        *)
            break
            ;;
    esac
    shift
done

case "$drvop" in
--postinstall)
    check_module_arch
    postinstall
    ;;
--preremove)
    preremove "$fatal"
    ;;
--installdrivers)
    check_module_arch
    install_drivers
    ;;
--removedrivers)
    remove_drivers "$fatal"
    ;;
--setupdrivers)
    remove_drivers "$fatal"
    install_drivers
    ;;
*)
    errorprint "Invalid operation $drvop"
    exit 1
esac

exit "$?"