rdpusb.c@ 58158

Last change on this file since 58158 was 58158, checked in by vboxsync, 9 years ago
USBPROXYDEV: nits.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 20.8 KB

Line
1	/** @file
2	*
3	* Remote Desktop Protocol client:
4	* USB Channel Process Functions
5	*
6	*/
7
8	/*
9	* Copyright (C) 2006-2011 Oracle Corporation
10	*
11	* This file is part of VirtualBox Open Source Edition (OSE), as
12	* available from http://www.virtualbox.org. This file is free software;
13	* you can redistribute it and/or modify it under the terms of the GNU
14	* General Public License (GPL) as published by the Free Software
15	* Foundation, in version 2 as it comes in the "COPYING" file of the
16	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
17	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
18	*/
19
20	/* DEBUG is defined in ../rdesktop.h */
21	#ifdef DEBUG
22	# define VBOX_DEBUG DEBUG
23	#endif
24	#include "../rdesktop.h"
25	#undef DEBUG
26	#ifdef VBOX_DEBUG
27	# define DEBUG VBOX_DEBUG
28	#endif
29
30	#include "vrdpusb.h"
31	#include "USBProxyDevice.h"
32	#include "USBGetDevices.h"
33
34	#include <iprt/cdefs.h>
35	#include <iprt/types.h>
36	#include <iprt/err.h>
37	#include <iprt/log.h>
38
39	#include <unistd.h>
40	#include <ctype.h>
41	#include <fcntl.h>
42
43
44	#define RDPUSB_REQ_OPEN (0)
45	#define RDPUSB_REQ_CLOSE (1)
46	#define RDPUSB_REQ_RESET (2)
47	#define RDPUSB_REQ_SET_CONFIG (3)
48	#define RDPUSB_REQ_CLAIM_INTERFACE (4)
49	#define RDPUSB_REQ_RELEASE_INTERFACE (5)
50	#define RDPUSB_REQ_INTERFACE_SETTING (6)
51	#define RDPUSB_REQ_QUEUE_URB (7)
52	#define RDPUSB_REQ_REAP_URB (8)
53	#define RDPUSB_REQ_CLEAR_HALTED_EP (9)
54	#define RDPUSB_REQ_CANCEL_URB (10)
55	#define RDPUSB_REQ_DEVICE_LIST (11)
56	#define RDPUSB_REQ_NEGOTIATE (12)
57
58	static VCHANNEL *rdpusb_channel;
59
60	/** Well-known locations for the Linux Usbfs virtual file system */
61	static const struct
62	{
63	/** Expected mount location for Usbfs */
64	const char *pcszRoot;
65	/** Expected location of the "devices" file */
66	const char *pcszDevices;
67	} g_usbfsPaths[] =
68	{
69	{ "/proc/bus/usb", "/proc/bus/usb/devices" },
70	{ "/dev/bus/usb", "/dev/bus/usb/devices" }
71	};
72
73	/** Location at which the USB device tree was found. NULL means not
74	* found. */
75	static const char *g_pcszDevicesRoot = NULL;
76	static bool g_fUseSysfs = false;
77
78	static PUSBDEVICE g_pUsbDevices = NULL;
79
80	/* A device list entry */
81	#pragma pack (1)
82	typedef struct _DevListEntry
83	{
84	uint16_t oNext; /* Offset of the next structure. 0 if last. */
85	uint32_t id; /* Identifier of the device assigned by the client. */
86	uint16_t bcdUSB; /* USB verion number. */
87	uint8_t bDeviceClass; /* Device class. */
88	uint8_t bDeviceSubClass; /* Device subclass. */
89	uint8_t bDeviceProtocol; /* Device protocol. */
90	uint16_t idVendor; /* Vendor id. */
91	uint16_t idProduct; /* Product id. */
92	uint16_t bcdRev; /* Revision. */
93	uint16_t oManufacturer; /* Offset of manufacturer string. */
94	uint16_t oProduct; /* Offset of product string. */
95	uint16_t oSerialNumber; /* Offset of serial string. */
96	uint16_t idPort; /* Physical USB port the device is connected to. */
97	} DevListEntry;
98	#pragma pack ()
99
100	/**
101	* @returns VBox status code.
102	*/
103	static inline int op_usbproxy_back_open(PUSBPROXYDEV p, const char *pszAddress)
104	{
105	return g_USBProxyDeviceHost.pfnOpen (p, pszAddress, NULL);
106	}
107
108	static inline void op_usbproxy_back_close(PUSBPROXYDEV pDev)
109	{
110	return g_USBProxyDeviceHost.pfnClose (pDev);
111	}
112
113	/**
114	* @returns VBox status code.
115	*/
116	static inline int op_usbproxy_back_reset(PUSBPROXYDEV pDev)
117	{
118	return g_USBProxyDeviceHost.pfnReset (pDev, false);
119	}
120
121	/**
122	* @returns VBox status code.
123	*/
124	static inline int op_usbproxy_back_set_config(PUSBPROXYDEV pDev, int cfg)
125	{
126	return g_USBProxyDeviceHost.pfnSetConfig (pDev, cfg);
127	}
128
129	/**
130	* @returns VBox status code.
131	*/
132	static inline int op_usbproxy_back_claim_interface(PUSBPROXYDEV pDev, int ifnum)
133	{
134	return g_USBProxyDeviceHost.pfnClaimInterface (pDev, ifnum);
135	}
136
137	/**
138	* @returns VBox status code.
139	*/
140	static inline int op_usbproxy_back_release_interface(PUSBPROXYDEV pDev, int ifnum)
141	{
142	return g_USBProxyDeviceHost.pfnReleaseInterface (pDev, ifnum);
143	}
144
145	/**
146	* @returns VBox status code.
147	*/
148	static inline int op_usbproxy_back_interface_setting(PUSBPROXYDEV pDev, int ifnum, int setting)
149	{
150	return g_USBProxyDeviceHost.pfnSetInterface (pDev, ifnum, setting);
151	}
152
153	/**
154	* @returns VBox status code.
155	*/
156	static inline int op_usbproxy_back_queue_urb(PUSBPROXYDEV pDev, PVUSBURB pUrb)
157	{
158	return g_USBProxyDeviceHost.pfnUrbQueue(pDev, pUrb);
159	}
160
161	static inline PVUSBURB op_usbproxy_back_reap_urb(PUSBPROXYDEV pDev, unsigned cMillies)
162	{
163	return g_USBProxyDeviceHost.pfnUrbReap (pDev, cMillies);
164	}
165
166	/**
167	* @returns VBox status code.
168	*/
169	static inline int op_usbproxy_back_clear_halted_ep(PUSBPROXYDEV pDev, unsigned EndPoint)
170	{
171	return g_USBProxyDeviceHost.pfnClearHaltedEndpoint (pDev, EndPoint);
172	}
173
174	/**
175	* @returns VBox status code.
176	*/
177	static inline int op_usbproxy_back_cancel_urb(PUSBPROXYDEV pDev, PVUSBURB pUrb)
178	{
179	return g_USBProxyDeviceHost.pfnUrbCancel (pDev, pUrb);
180	}
181
182
183	/** Count the USB devices in a linked list of PUSBDEVICE structures. */
184	unsigned countUSBDevices(PUSBDEVICE pDevices)
185	{
186	unsigned i = 0;
187	for (; pDevices; pDevices = pDevices->pNext)
188	++i;
189	return i;
190	}
191
192
193	enum {
194	/** The space we set aside for the USB strings. Should always be enough,
195	* as a USB device contains up to 256 characters of UTF-16 string data. */
196	MAX_STRINGS_LEN = 1024,
197	/** The space we reserve for each wire format device entry */
198	DEV_ENTRY_SIZE = sizeof(DevListEntry) + MAX_STRINGS_LEN
199	};
200
201
202	/**
203	* Add a string to the end of a wire format device entry.
204	* @param pBuf the start of the buffer containing the entry
205	* @param iBuf the index into the buffer to add the string at
206	* @param pcsz the string to add - optional
207	* @param piString where to write back @a iBuf or zero if there is no string
208	* @param piNext where to write back the index where the next string may
209	* start
210	*/
211	static void addStringToEntry(char pBuf, uint16_t iBuf, const char pcsz,
212	uint16_t piString, uint16_t piNext)
213	{
214	size_t cch;
215
216	*piString = 0;
217	*piNext = iBuf;
218	if (!pcsz)
219	return;
220	cch = strlen(pcsz) + 1;
221	if (cch > DEV_ENTRY_SIZE - iBuf)
222	return;
223	strcpy(pBuf + iBuf, pcsz);
224	*piString = iBuf;
225	*piNext = iBuf + cch;
226	}
227
228
229	/** Fill in a device list entry in wire format from a PUSBDEVICE and return an
230	* index to where the next string should start */
231	static void fillWireListEntry(char *pBuf, PUSBDEVICE pDevice,
232	uint16_t *piNext)
233	{
234	DevListEntry *pEntry;
235	uint16_t iNextString = sizeof(DevListEntry);
236
237	pEntry = (DevListEntry *)pBuf;
238	pEntry->id = (pDevice->bPort << 8) + pDevice->bBus;
239	pEntry->bcdUSB = pDevice->bcdUSB;
240	pEntry->bDeviceClass = pDevice->bDeviceClass;
241	pEntry->bDeviceSubClass = pDevice->bDeviceSubClass;
242	pEntry->idVendor = pDevice->idVendor;
243	pEntry->idProduct = pDevice->idProduct;
244	pEntry->bcdRev = pDevice->bcdDevice;
245	pEntry->idPort = pDevice->bPort;
246	addStringToEntry(pBuf, iNextString, pDevice->pszManufacturer,
247	&pEntry->oManufacturer, &iNextString);
248	addStringToEntry(pBuf, iNextString, pDevice->pszProduct,
249	&pEntry->oProduct, &iNextString);
250	addStringToEntry(pBuf, iNextString, pDevice->pszSerialNumber,
251	&pEntry->oSerialNumber, &pEntry->oNext);
252	*piNext = pEntry->oNext;
253	}
254
255
256	/** Allocate (and return) a buffer for a device list in VRDP wire format,
257	* and populate from a PUSBDEVICE linked list. @a pLen takes the length of
258	* the new list.
259	* See @a Console::processRemoteUSBDevices for the receiving end. */
260	static void buildWireListFromDevices(PUSBDEVICE pDevices, int pLen)
261	{
262	char *pBuf;
263	unsigned cDevs, cbBuf, iCurrent;
264	uint16_t iNext;
265	PUSBDEVICE pCurrent;
266
267	cDevs = countUSBDevices(pDevices);
268	cbBuf = cDevs * DEV_ENTRY_SIZE + 2;
269	pBuf = (char *)xmalloc(cbBuf);
270	memset(pBuf, 0, cbBuf);
271	for (pCurrent = pDevices, iCurrent = 0; pCurrent;
272	pCurrent = pCurrent->pNext, iCurrent += iNext, --cDevs)
273	{
274	unsigned i, cZeros;
275
276	AssertReturnStmt(iCurrent + DEV_ENTRY_SIZE + 2 <= cbBuf,
277	free(pBuf), NULL);
278	fillWireListEntry(pBuf + iCurrent, pCurrent, &iNext);
279	DevListEntry pEntry = (DevListEntry )(pBuf + iCurrent);
280	/* Sanity tests */
281	for (i = iCurrent + sizeof(DevListEntry), cZeros = 0;
282	i < iCurrent + iNext; ++i)
283	if (pBuf[i] == 0)
284	++cZeros;
285	AssertReturnStmt(cZeros == RT_BOOL(pEntry->oManufacturer)
286	+ RT_BOOL(pEntry->oProduct)
287	+ RT_BOOL(pEntry->oSerialNumber),
288	free(pBuf), NULL);
289	Assert(pEntry->oManufacturer == 0 \|\| pBuf[iCurrent + pEntry->oManufacturer] != '\0');
290	Assert(pEntry->oProduct == 0 \|\| pBuf[iCurrent + pEntry->oProduct] != '\0');
291	Assert(pEntry->oSerialNumber == 0 \|\| pBuf[iCurrent + pEntry->oSerialNumber] != '\0');
292	AssertReturnStmt(cZeros == 0 \|\| pBuf[iCurrent + iNext - 1] == '\0',
293	free(pBuf), NULL);
294	}
295	*pLen = iCurrent + iNext + 2;
296	Assert(cDevs == 0);
297	Assert(*pLen <= cbBuf);
298	return pBuf;
299	}
300
301
302	/** Build a list of the usable USB devices currently connected to the client
303	* system using the VRDP wire protocol. The structure returned must be freed
304	* using free(3) when it is no longer needed; returns NULL and sets *pLen to
305	* zero on failure. */
306	static void build_device_list (int pLen)
307	{
308	void *pvDeviceList;
309
310	Log(("RDPUSB build_device_list"));
311	*pLen = 0;
312	if (g_pUsbDevices)
313	deviceListFree(&g_pUsbDevices);
314	g_pUsbDevices = USBProxyLinuxGetDevices(g_pcszDevicesRoot, g_fUseSysfs);
315	if (!g_pUsbDevices)
316	return NULL;
317	pvDeviceList = buildWireListFromDevices(g_pUsbDevices, pLen);
318	return pvDeviceList;
319	}
320
321
322	static STREAM
323	rdpusb_init_packet(uint32 len, uint8 code)
324	{
325	STREAM s;
326
327	s = channel_init(rdpusb_channel, len + 5);
328	out_uint32_le (s, len + sizeof (code)); /* The length of data after the 'len' field. */
329	out_uint8(s, code);
330	return s;
331	}
332
333	static void
334	rdpusb_send(STREAM s)
335	{
336	#ifdef RDPUSB_DEBUG
337	Log(("RDPUSB send:\n"));
338	hexdump(s->channel_hdr + 8, s->end - s->channel_hdr - 8);
339	#endif
340
341	channel_send(s, rdpusb_channel);
342	}
343
344	static void
345	rdpusb_send_reply (uint8_t code, uint8_t status, uint32_t devid)
346	{
347	STREAM s = rdpusb_init_packet(5, code);
348	out_uint8(s, status);
349	out_uint32_le(s, devid);
350	s_mark_end(s);
351	rdpusb_send(s);
352	}
353
354	static void
355	rdpusb_send_access_denied (uint8_t code, uint32_t devid)
356	{
357	rdpusb_send_reply (code, VRDP_USB_STATUS_ACCESS_DENIED, devid);
358	}
359
360	static inline int
361	vrdp_usb_status (int rc, VUSBDEV *pdev)
362	{
363	if (!rc \|\| usbProxyFromVusbDev(pdev)->fDetached)
364	{
365	return VRDP_USB_STATUS_DEVICE_REMOVED;
366	}
367
368	return VRDP_USB_STATUS_SUCCESS;
369	}
370
371	static PUSBPROXYDEV g_proxies = NULL;
372
373	static PUSBPROXYDEV
374	devid2proxy (uint32_t devid)
375	{
376	PUSBPROXYDEV proxy = g_proxies;
377
378	while (proxy && proxy->idVrdp != devid)
379	{
380	proxy = proxy->pNext;
381	}
382
383	return proxy;
384	}
385
386	static void
387	rdpusb_reap_urbs (void)
388	{
389	STREAM s;
390
391	PVUSBURB pUrb = NULL;
392
393	PUSBPROXYDEV proxy = g_proxies;
394
395	while (proxy)
396	{
397	pUrb = op_usbproxy_back_reap_urb(proxy, 0);
398
399	if (pUrb)
400	{
401	int datalen = 0;
402
403	Log(("RDPUSB: rdpusb_reap_urbs: cbData = %d, enmStatus = %d\n", pUrb->cbData, pUrb->enmStatus));
404
405	if (pUrb->enmDir == VUSB_DIRECTION_IN)
406	{
407	datalen = pUrb->cbData;
408	}
409
410	s = rdpusb_init_packet(14 + datalen, RDPUSB_REQ_REAP_URB);
411	out_uint32_le(s, proxy->idVrdp);
412	out_uint8(s, VRDP_USB_REAP_FLAG_LAST);
413	out_uint8(s, pUrb->enmStatus);
414	out_uint32_le(s, pUrb->handle);
415	out_uint32_le(s, pUrb->cbData);
416
417	if (datalen)
418	{
419	out_uint8a (s, pUrb->abData, datalen);
420	}
421
422	s_mark_end(s);
423	rdpusb_send(s);
424
425	if (pUrb->pPrev \|\| pUrb->pNext \|\| pUrb == proxy->pUrbs)
426	{
427	/* Remove the URB from list. */
428	if (pUrb->pPrev)
429	{
430	pUrb->pPrev->pNext = pUrb->pNext;
431	}
432	else
433	{
434	proxy->pUrbs = pUrb->pNext;
435	}
436
437	if (pUrb->pNext)
438	{
439	pUrb->pNext->pPrev = pUrb->pPrev;
440	}
441	}
442
443	#ifdef RDPUSB_DEBUG
444	Log(("Going to free %p\n", pUrb));
445	#endif
446	xfree (pUrb);
447	#ifdef RDPUSB_DEBUG
448	Log(("freed %p\n", pUrb));
449	#endif
450	}
451
452	proxy = proxy->pNext;
453	}
454
455	return;
456	}
457
458	static void
459	rdpusb_process(STREAM s)
460	{
461	int rc;
462
463	uint32 len;
464	uint8 code;
465	uint32 devid;
466
467	PUSBPROXYDEV proxy = NULL;
468
469	#ifdef RDPUSB_DEBUG
470	Log(("RDPUSB recv:\n"));
471	hexdump(s->p, s->end - s->p);
472	#endif
473
474	in_uint32_le (s, len);
475	if (len > s->end - s->p)
476	{
477	error("RDPUSB: not enough data len = %d, bytes left %d\n", len, s->end - s->p);
478	return;
479	}
480
481	in_uint8(s, code);
482
483	Log(("RDPUSB recv: len = %d, code = %d\n", len, code));
484
485	switch (code)
486	{
487	case RDPUSB_REQ_OPEN:
488	{
489	PUSBDEVICE pDevice;
490
491	in_uint32_le(s, devid);
492
493	proxy = (PUSBPROXYDEV )xmalloc (sizeof (USBPROXYDEV));
494	if (!proxy)
495	{
496	error("RDPUSB: Out of memory allocating proxy backend data\n");
497	return;
498	}
499
500	memset (proxy, 0, sizeof (USBPROXYDEV));
501
502	proxy->pvInstanceDataR3 = xmalloc(g_USBProxyDeviceHost.cbBackend);
503	if (!proxy->pvInstanceDataR3)
504	{
505	xfree (proxy);
506	error("RDPUSB: Out of memory allocating proxy backend data\n");
507	return;
508	}
509
510	proxy->Dev.pszName = "Remote device";
511	proxy->idVrdp = devid;
512
513	for (pDevice = g_pUsbDevices; pDevice; pDevice = pDevice->pNext)
514	if ((pDevice->bPort << 8) + pDevice->bBus == devid)
515	break;
516
517	rc = pDevice ? op_usbproxy_back_open(proxy, pDevice->pszAddress)
518	: VERR_NOT_FOUND;
519
520	if (rc != VINF_SUCCESS)
521	{
522	rdpusb_send_access_denied (code, devid);
523	xfree (proxy);
524	proxy = NULL;
525	}
526	else
527	{
528	if (g_proxies)
529	{
530	g_proxies->pPrev = proxy;
531	}
532
533	proxy->pNext = g_proxies;
534	g_proxies = proxy;
535	}
536	} break;
537
538	case RDPUSB_REQ_CLOSE:
539	{
540	in_uint32_le(s, devid);
541	proxy = devid2proxy (devid);
542
543	if (proxy)
544	{
545	op_usbproxy_back_close(proxy);
546
547	if (proxy->pPrev)
548	{
549	proxy->pPrev->pNext = proxy->pNext;
550	}
551	else
552	{
553	g_proxies = proxy->pNext;
554	}
555
556	if (proxy->pNext)
557	{
558	proxy->pNext->pPrev = proxy->pPrev;
559	}
560
561	xfree (proxy->pvInstanceDataR3);
562	xfree (proxy);
563	proxy = NULL;
564	}
565
566	/* No reply. */
567	} break;
568
569	case RDPUSB_REQ_RESET:
570	{
571	in_uint32_le(s, devid);
572	proxy = devid2proxy (devid);
573
574	if (!proxy)
575	{
576	rdpusb_send_access_denied (code, devid);
577	break;
578	}
579
580	rc = op_usbproxy_back_reset(proxy);
581	if (rc != VINF_SUCCESS)
582	{
583	rdpusb_send_reply (code, vrdp_usb_status (!rc, &proxy->Dev), devid);
584	}
585	} break;
586
587	case RDPUSB_REQ_SET_CONFIG:
588	{
589	uint8 cfg;
590
591	in_uint32_le(s, devid);
592	proxy = devid2proxy (devid);
593
594	if (!proxy)
595	{
596	rdpusb_send_access_denied (code, devid);
597	break;
598	}
599
600	in_uint8(s, cfg);
601
602	rc = op_usbproxy_back_set_config(proxy, cfg);
603	if (RT_FAILURE(rc))
604	{
605	rdpusb_send_reply (code, vrdp_usb_status (rc, &proxy->Dev), devid);
606	}
607	} break;
608
609	case RDPUSB_REQ_CLAIM_INTERFACE:
610	{
611	uint8 ifnum;
612
613	in_uint32_le(s, devid);
614	proxy = devid2proxy (devid);
615
616	if (!proxy)
617	{
618	rdpusb_send_access_denied (code, devid);
619	break;
620	}
621
622	in_uint8(s, ifnum);
623	in_uint8(s, ifnum);
624
625	rc = op_usbproxy_back_claim_interface(proxy, ifnum);
626	if (RT_FAILURE(rc))
627	{
628	rdpusb_send_reply (code, vrdp_usb_status (rc, &proxy->Dev), devid);
629	}
630	} break;
631
632	case RDPUSB_REQ_RELEASE_INTERFACE:
633	{
634	uint8 ifnum;
635
636	in_uint32_le(s, devid);
637	proxy = devid2proxy (devid);
638
639	if (!proxy)
640	{
641	rdpusb_send_access_denied (code, devid);
642	break;
643	}
644
645	in_uint8(s, ifnum);
646
647	rc = op_usbproxy_back_release_interface(proxy, ifnum);
648	if (RT_FAILURE(rc))
649	{
650	rdpusb_send_reply (code, vrdp_usb_status (rc, &proxy->Dev), devid);
651	}
652	} break;
653
654	case RDPUSB_REQ_INTERFACE_SETTING:
655	{
656	uint8 ifnum;
657	uint8 setting;
658
659	in_uint32_le(s, devid);
660	proxy = devid2proxy (devid);
661
662	if (!proxy)
663	{
664	rdpusb_send_access_denied (code, devid);
665	break;
666	}
667
668	in_uint8(s, ifnum);
669	in_uint8(s, setting);
670
671	rc = op_usbproxy_back_interface_setting(proxy, ifnum, setting);
672	if (RT_FAILURE(rc))
673	{
674	rdpusb_send_reply (code, vrdp_usb_status (rc, &proxy->Dev), devid);
675	}
676	} break;
677
678	case RDPUSB_REQ_QUEUE_URB:
679	{
680	uint32 handle;
681	uint8 type;
682	uint8 ep;
683	uint8 dir;
684	uint32 urblen;
685	uint32 datalen;
686
687	PVUSBURB pUrb; // struct vusb_urb *urb;
688
689	in_uint32_le(s, devid);
690	proxy = devid2proxy (devid);
691
692	if (!proxy)
693	{
694	/* No reply. */
695	break;
696	}
697
698	in_uint32(s, handle);
699	in_uint8(s, type);
700	in_uint8(s, ep);
701	in_uint8(s, dir);
702	in_uint32(s, urblen);
703	in_uint32(s, datalen);
704
705	/* Allocate a single block for URB description and data buffer */
706	pUrb = (PVUSBURB)xmalloc (sizeof (VUSBURB) +
707	(urblen <= sizeof (pUrb->abData)? 0: urblen - sizeof (pUrb->abData))
708	);
709	memset (pUrb, 0, sizeof (VUSBURB));
710	pUrb->pDev = &proxy->Dev;
711	pUrb->handle = handle;
712	pUrb->enmType = type;
713	pUrb->enmStatus = 0;
714	pUrb->EndPt = ep;
715	pUrb->enmDir = dir;
716	pUrb->cbData = urblen;
717
718	Log(("RDPUSB: queued URB handle = %d\n", handle));
719
720	if (datalen)
721	{
722	in_uint8a (s, pUrb->abData, datalen);
723	}
724
725	rc = op_usbproxy_back_queue_urb(proxy, pUrb);
726
727	/* No reply required. */
728
729	if (RT_SUCCESS(rc))
730	{
731	if (proxy->pUrbs)
732	{
733	proxy->pUrbs->pPrev = pUrb;
734	}
735
736	pUrb->pNext = proxy->pUrbs;
737	proxy->pUrbs = pUrb;
738	}
739	else
740	{
741	xfree (pUrb);
742	}
743	} break;
744
745	case RDPUSB_REQ_REAP_URB:
746	{
747	rdpusb_reap_urbs ();
748	} break;
749
750	case RDPUSB_REQ_CLEAR_HALTED_EP:
751	{
752	uint8 ep;
753
754	in_uint32_le(s, devid);
755	proxy = devid2proxy (devid);
756
757	if (!proxy)
758	{
759	rdpusb_send_access_denied (code, devid);
760	break;
761	}
762
763	in_uint8(s, ep);
764
765	rc = op_usbproxy_back_clear_halted_ep(proxy, ep);
766	if (RT_FAILURE(rc))
767	{
768	rdpusb_send_reply (code, vrdp_usb_status (rc, &proxy->Dev), devid);
769	}
770	} break;
771
772	case RDPUSB_REQ_CANCEL_URB:
773	{
774	uint32 handle;
775	PVUSBURB pUrb = NULL;
776
777	in_uint32_le(s, devid);
778	proxy = devid2proxy (devid);
779
780	if (!proxy)
781	{
782	rdpusb_send_access_denied (code, devid);
783	break;
784	}
785
786	in_uint32_le(s, handle);
787
788	pUrb = proxy->pUrbs;
789
790	while (pUrb && pUrb->handle != handle)
791	{
792	pUrb = pUrb->pNext;
793	}
794
795	if (pUrb)
796	{
797	op_usbproxy_back_cancel_urb(proxy, pUrb);
798
799	/* No reply required. */
800
801	/* Remove URB from list. */
802	if (pUrb->pPrev)
803	{
804	pUrb->pPrev->pNext = pUrb->pNext;
805	}
806	else
807	{
808	proxy->pUrbs = pUrb->pNext;
809	}
810
811	if (pUrb->pNext)
812	{
813	pUrb->pNext->pPrev = pUrb->pPrev;
814	}
815
816	pUrb->pNext = pUrb->pPrev = NULL;
817
818	Log(("Cancelled URB %p\n", pUrb));
819
820	// xfree (pUrb);
821	}
822	} break;
823
824	case RDPUSB_REQ_DEVICE_LIST:
825	{
826	void *buf = NULL;
827	int len = 0;
828
829	buf = build_device_list (&len);
830
831	s = rdpusb_init_packet(len? len: 2, code);
832	if (len)
833	{
834	out_uint8p (s, buf, len);
835	}
836	else
837	{
838	out_uint16_le(s, 0);
839	}
840	s_mark_end(s);
841	rdpusb_send(s);
842
843	if (buf)
844	{
845	free (buf);
846	}
847	} break;
848
849	case RDPUSB_REQ_NEGOTIATE:
850	{
851	s = rdpusb_init_packet(1, code);
852	out_uint8(s, VRDP_USB_CAPS_FLAG_ASYNC);
853	s_mark_end(s);
854	rdpusb_send(s);
855	} break;
856
857	default:
858	unimpl("RDPUSB code %d\n", code);
859	break;
860	}
861	}
862
863	void
864	rdpusb_add_fds(int n, fd_set rfds, fd_set * wfds)
865	{
866	PUSBPROXYDEV proxy = g_proxies;
867
868	// Log(("RDPUSB: rdpusb_add_fds: begin n = %d\n", n));
869
870	while (proxy)
871	{
872	int fd = USBProxyDeviceLinuxGetFD(proxy);
873
874	if (fd != -1)
875	{
876	// Log(("RDPUSB: rdpusb_add_fds: adding %d\n", proxy->priv.File));
877
878	FD_SET(fd, rfds);
879	FD_SET(fd, wfds);
880	n = MAX(n, fd);
881	}
882
883	proxy = proxy->pNext;
884	}
885
886	// Log(("RDPUSB: rdpusb_add_fds: end n = %d\n", n));
887
888	return;
889	}
890
891	void
892	rdpusb_check_fds(fd_set * rfds, fd_set * wfds)
893	{
894	PUSBPROXYDEV proxy = g_proxies;
895	unsigned found = 0;
896
897	while (proxy)
898	{
899	int fd = USBProxyDeviceLinuxGetFD(proxy);
900
901	if (fd != -1)
902	{
903	if (FD_ISSET(fd, rfds))
904	found = 1;
905	if (FD_ISSET(fd, wfds))
906	found = 1;
907	}
908
909	proxy = proxy->pNext;
910	}
911
912	// Log(("RDPUSB: rdpusb_check_fds: begin\n"));
913
914	if (found)
915	rdpusb_reap_urbs ();
916
917	// Log(("RDPUSB: rdpusb_check_fds: end\n"));
918
919	return;
920	}
921
922
923	RD_BOOL
924	rdpusb_init(void)
925	{
926	bool fUseUsbfs;
927	if (RT_SUCCESS(USBProxyLinuxChooseMethod(&fUseUsbfs, &g_pcszDevicesRoot)))
928	{
929	g_fUseSysfs = !fUseUsbfs;
930	rdpusb_channel =
931	channel_register("vrdpusb", CHANNEL_OPTION_INITIALIZED \| CHANNEL_OPTION_ENCRYPT_RDP,
932	rdpusb_process);
933	return (rdpusb_channel != NULL);
934	}
935	return false;
936	}
937
938	void
939	rdpusb_close (void)
940	{
941	PUSBPROXYDEV proxy = g_proxies;
942
943	while (proxy)
944	{
945	PUSBPROXYDEV pNext = proxy->pNext;
946
947	Log(("RDPUSB: closing proxy %p\n", proxy));
948
949	op_usbproxy_back_close(proxy);
950	xfree (proxy);
951
952	proxy = pNext;
953	}
954
955	return;
956	}

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/RDP/client-1.8.3/vrdp/rdpusb.c@ 58158

Download in other formats: