serial.c@ 93010

Last change on this file since 93010 was 55123, checked in by vboxsync, 10 years ago
rdesktop 1.8.3 modified for VBox
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 27.1 KB

Line
1	/* -- c-basic-offset: 8 --
2	rdesktop: A Remote Desktop Protocol client.
3
4	Copyright (C) Matthew Chapman <matthewc.unsw.edu.au> 1999-2008
5
6	This program is free software: you can redistribute it and/or modify
7	it under the terms of the GNU General Public License as published by
8	the Free Software Foundation, either version 3 of the License, or
9	(at your option) any later version.
10
11	This program is distributed in the hope that it will be useful,
12	but WITHOUT ANY WARRANTY; without even the implied warranty of
13	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14	GNU General Public License for more details.
15
16	You should have received a copy of the GNU General Public License
17	along with this program. If not, see <http://www.gnu.org/licenses/>.
18	*/
19
20	/*
21	* Oracle GPL Disclaimer: For the avoidance of doubt, except that if any license choice
22	* other than GPL or LGPL is available it will apply instead, Oracle elects to use only
23	* the General Public License version 2 (GPLv2) at this time for any software where
24	* a choice of GPL license versions is made available with the language indicating
25	* that GPLv2 or any later version may be used, or where a choice of which version
26	* of the GPL is applied is otherwise unspecified.
27	*/
28
29	#include <unistd.h>
30	#include <fcntl.h>
31	#include <termios.h>
32	#include <strings.h>
33	#include <sys/ioctl.h>
34
35	#ifdef HAVE_SYS_MODEM_H
36	#include <sys/modem.h>
37	#endif
38	#ifdef HAVE_SYS_FILIO_H
39	#include <sys/filio.h>
40	#endif
41	#ifdef HAVE_SYS_STRTIO_H
42	#include <sys/strtio.h>
43	#endif
44
45	#include "rdesktop.h"
46
47	#ifdef WITH_DEBUG_SERIAL
48	#define DEBUG_SERIAL(args) printf args;
49	#else
50	#define DEBUG_SERIAL(args) do {} while (0)
51	#endif
52
53	#define FILE_DEVICE_SERIAL_PORT 0x1b
54
55	#define SERIAL_SET_BAUD_RATE 1
56	#define SERIAL_SET_QUEUE_SIZE 2
57	#define SERIAL_SET_LINE_CONTROL 3
58	#define SERIAL_SET_BREAK_ON 4
59	#define SERIAL_SET_BREAK_OFF 5
60	#define SERIAL_IMMEDIATE_CHAR 6
61	#define SERIAL_SET_TIMEOUTS 7
62	#define SERIAL_GET_TIMEOUTS 8
63	#define SERIAL_SET_DTR 9
64	#define SERIAL_CLR_DTR 10
65	#define SERIAL_RESET_DEVICE 11
66	#define SERIAL_SET_RTS 12
67	#define SERIAL_CLR_RTS 13
68	#define SERIAL_SET_XOFF 14
69	#define SERIAL_SET_XON 15
70	#define SERIAL_GET_WAIT_MASK 16
71	#define SERIAL_SET_WAIT_MASK 17
72	#define SERIAL_WAIT_ON_MASK 18
73	#define SERIAL_PURGE 19
74	#define SERIAL_GET_BAUD_RATE 20
75	#define SERIAL_GET_LINE_CONTROL 21
76	#define SERIAL_GET_CHARS 22
77	#define SERIAL_SET_CHARS 23
78	#define SERIAL_GET_HANDFLOW 24
79	#define SERIAL_SET_HANDFLOW 25
80	#define SERIAL_GET_MODEMSTATUS 26
81	#define SERIAL_GET_COMMSTATUS 27
82	#define SERIAL_XOFF_COUNTER 28
83	#define SERIAL_GET_PROPERTIES 29
84	#define SERIAL_GET_DTRRTS 30
85	#define SERIAL_LSRMST_INSERT 31
86	#define SERIAL_CONFIG_SIZE 32
87	#define SERIAL_GET_COMMCONFIG 33
88	#define SERIAL_SET_COMMCONFIG 34
89	#define SERIAL_GET_STATS 35
90	#define SERIAL_CLEAR_STATS 36
91	#define SERIAL_GET_MODEM_CONTROL 37
92	#define SERIAL_SET_MODEM_CONTROL 38
93	#define SERIAL_SET_FIFO_CONTROL 39
94
95	#define STOP_BITS_1 0
96	#define STOP_BITS_2 2
97
98	#define NO_PARITY 0
99	#define ODD_PARITY 1
100	#define EVEN_PARITY 2
101
102	#define SERIAL_PURGE_TXABORT 0x00000001
103	#define SERIAL_PURGE_RXABORT 0x00000002
104	#define SERIAL_PURGE_TXCLEAR 0x00000004
105	#define SERIAL_PURGE_RXCLEAR 0x00000008
106
107	/* SERIAL_WAIT_ON_MASK */
108	#define SERIAL_EV_RXCHAR 0x0001 /* Any Character received */
109	#define SERIAL_EV_RXFLAG 0x0002 /* Received certain character */
110	#define SERIAL_EV_TXEMPTY 0x0004 /* Transmitt Queue Empty */
111	#define SERIAL_EV_CTS 0x0008 /* CTS changed state */
112	#define SERIAL_EV_DSR 0x0010 /* DSR changed state */
113	#define SERIAL_EV_RLSD 0x0020 /* RLSD changed state */
114	#define SERIAL_EV_BREAK 0x0040 /* BREAK received */
115	#define SERIAL_EV_ERR 0x0080 /* Line status error occurred */
116	#define SERIAL_EV_RING 0x0100 /* Ring signal detected */
117	#define SERIAL_EV_PERR 0x0200 /* Printer error occured */
118	#define SERIAL_EV_RX80FULL 0x0400 /* Receive buffer is 80 percent full */
119	#define SERIAL_EV_EVENT1 0x0800 /* Provider specific event 1 */
120	#define SERIAL_EV_EVENT2 0x1000 /* Provider specific event 2 */
121
122	/* Modem Status */
123	#define SERIAL_MS_DTR 0x01
124	#define SERIAL_MS_RTS 0x02
125	#define SERIAL_MS_CTS 0x10
126	#define SERIAL_MS_DSR 0x20
127	#define SERIAL_MS_RNG 0x40
128	#define SERIAL_MS_CAR 0x80
129
130	/* Handflow */
131	#define SERIAL_DTR_CONTROL 0x01
132	#define SERIAL_CTS_HANDSHAKE 0x08
133	#define SERIAL_ERROR_ABORT 0x80000000
134
135	#define SERIAL_XON_HANDSHAKE 0x01
136	#define SERIAL_XOFF_HANDSHAKE 0x02
137	#define SERIAL_DSR_SENSITIVITY 0x40
138
139	#define SERIAL_CHAR_EOF 0
140	#define SERIAL_CHAR_ERROR 1
141	#define SERIAL_CHAR_BREAK 2
142	#define SERIAL_CHAR_EVENT 3
143	#define SERIAL_CHAR_XON 4
144	#define SERIAL_CHAR_XOFF 5
145
146	#ifndef CRTSCTS
147	#define CRTSCTS 0
148	#endif
149
150	/* FIONREAD should really do the same thing as TIOCINQ, where it is
151	* not available */
152	#if !defined(TIOCINQ) && defined(FIONREAD)
153	#define TIOCINQ FIONREAD
154	#endif
155	#if !defined(TIOCOUTQ) && defined(FIONWRITE)
156	#define TIOCOUTQ FIONWRITE
157	#endif
158
159	extern RDPDR_DEVICE g_rdpdr_device[];
160
161	static SERIAL_DEVICE *
162	get_serial_info(RD_NTHANDLE handle)
163	{
164	int index;
165
166	for (index = 0; index < RDPDR_MAX_DEVICES; index++)
167	{
168	if (handle == g_rdpdr_device[index].handle)
169	return (SERIAL_DEVICE *) g_rdpdr_device[index].pdevice_data;
170	}
171	return NULL;
172	}
173
174	static RD_BOOL
175	get_termios(SERIAL_DEVICE * pser_inf, RD_NTHANDLE serial_fd)
176	{
177	speed_t speed;
178	struct termios *ptermios;
179
180	ptermios = pser_inf->ptermios;
181
182	if (tcgetattr(serial_fd, ptermios) == -1)
183	return False;
184
185	speed = cfgetispeed(ptermios);
186	switch (speed)
187	{
188	#ifdef B75
189	case B75:
190	pser_inf->baud_rate = 75;
191	break;
192	#endif
193	#ifdef B110
194	case B110:
195	pser_inf->baud_rate = 110;
196	break;
197	#endif
198	#ifdef B134
199	case B134:
200	pser_inf->baud_rate = 134;
201	break;
202	#endif
203	#ifdef B150
204	case B150:
205	pser_inf->baud_rate = 150;
206	break;
207	#endif
208	#ifdef B300
209	case B300:
210	pser_inf->baud_rate = 300;
211	break;
212	#endif
213	#ifdef B600
214	case B600:
215	pser_inf->baud_rate = 600;
216	break;
217	#endif
218	#ifdef B1200
219	case B1200:
220	pser_inf->baud_rate = 1200;
221	break;
222	#endif
223	#ifdef B1800
224	case B1800:
225	pser_inf->baud_rate = 1800;
226	break;
227	#endif
228	#ifdef B2400
229	case B2400:
230	pser_inf->baud_rate = 2400;
231	break;
232	#endif
233	#ifdef B4800
234	case B4800:
235	pser_inf->baud_rate = 4800;
236	break;
237	#endif
238	#ifdef B9600
239	case B9600:
240	pser_inf->baud_rate = 9600;
241	break;
242	#endif
243	#ifdef B19200
244	case B19200:
245	pser_inf->baud_rate = 19200;
246	break;
247	#endif
248	#ifdef B38400
249	case B38400:
250	pser_inf->baud_rate = 38400;
251	break;
252	#endif
253	#ifdef B57600
254	case B57600:
255	pser_inf->baud_rate = 57600;
256	break;
257	#endif
258	#ifdef B115200
259	case B115200:
260	pser_inf->baud_rate = 115200;
261	break;
262	#endif
263	#ifdef B230400
264	case B230400:
265	pser_inf->baud_rate = 230400;
266	break;
267	#endif
268	#ifdef B460800
269	case B460800:
270	pser_inf->baud_rate = 460800;
271	break;
272	#endif
273	default:
274	pser_inf->baud_rate = 9600;
275	break;
276	}
277
278	speed = cfgetospeed(ptermios);
279	pser_inf->dtr = (speed == B0) ? 0 : 1;
280
281	pser_inf->stop_bits = (ptermios->c_cflag & CSTOPB) ? STOP_BITS_2 : STOP_BITS_1;
282	pser_inf->parity =
283	(ptermios->c_cflag & PARENB) ? ((ptermios->c_cflag & PARODD) ? ODD_PARITY :
284	EVEN_PARITY) : NO_PARITY;
285	switch (ptermios->c_cflag & CSIZE)
286	{
287	case CS5:
288	pser_inf->word_length = 5;
289	break;
290	case CS6:
291	pser_inf->word_length = 6;
292	break;
293	case CS7:
294	pser_inf->word_length = 7;
295	break;
296	default:
297	pser_inf->word_length = 8;
298	break;
299	}
300
301	if (ptermios->c_cflag & CRTSCTS)
302	{
303	pser_inf->control = SERIAL_DTR_CONTROL \| SERIAL_CTS_HANDSHAKE \| SERIAL_ERROR_ABORT;
304	}
305	else
306	{
307	pser_inf->control = SERIAL_DTR_CONTROL \| SERIAL_ERROR_ABORT;
308	}
309
310	pser_inf->xonoff = SERIAL_DSR_SENSITIVITY;
311	if (ptermios->c_iflag & IXON)
312	pser_inf->xonoff \|= SERIAL_XON_HANDSHAKE;
313
314	if (ptermios->c_iflag & IXOFF)
315	pser_inf->xonoff \|= SERIAL_XOFF_HANDSHAKE;
316
317	pser_inf->chars[SERIAL_CHAR_XON] = ptermios->c_cc[VSTART];
318	pser_inf->chars[SERIAL_CHAR_XOFF] = ptermios->c_cc[VSTOP];
319	pser_inf->chars[SERIAL_CHAR_EOF] = ptermios->c_cc[VEOF];
320	pser_inf->chars[SERIAL_CHAR_BREAK] = ptermios->c_cc[VINTR];
321	pser_inf->chars[SERIAL_CHAR_ERROR] = ptermios->c_cc[VKILL];
322
323	return True;
324	}
325
326	static void
327	set_termios(SERIAL_DEVICE * pser_inf, RD_NTHANDLE serial_fd)
328	{
329	speed_t speed;
330
331	struct termios *ptermios;
332
333	ptermios = pser_inf->ptermios;
334
335
336	switch (pser_inf->baud_rate)
337	{
338	#ifdef B75
339	case 75:
340	speed = B75;
341	break;
342	#endif
343	#ifdef B110
344	case 110:
345	speed = B110;
346	break;
347	#endif
348	#ifdef B134
349	case 134:
350	speed = B134;
351	break;
352	#endif
353	#ifdef B150
354	case 150:
355	speed = B150;
356	break;
357	#endif
358	#ifdef B300
359	case 300:
360	speed = B300;
361	break;
362	#endif
363	#ifdef B600
364	case 600:
365	speed = B600;
366	break;
367	#endif
368	#ifdef B1200
369	case 1200:
370	speed = B1200;
371	break;
372	#endif
373	#ifdef B1800
374	case 1800:
375	speed = B1800;
376	break;
377	#endif
378	#ifdef B2400
379	case 2400:
380	speed = B2400;
381	break;
382	#endif
383	#ifdef B4800
384	case 4800:
385	speed = B4800;
386	break;
387	#endif
388	#ifdef B9600
389	case 9600:
390	speed = B9600;
391	break;
392	#endif
393	#ifdef B19200
394	case 19200:
395	speed = B19200;
396	break;
397	#endif
398	#ifdef B38400
399	case 38400:
400	speed = B38400;
401	break;
402	#endif
403	#ifdef B57600
404	case 57600:
405	speed = B57600;
406	break;
407	#endif
408	#ifdef B115200
409	case 115200:
410	speed = B115200;
411	break;
412	#endif
413	#ifdef B230400
414	case 230400:
415	speed = B115200;
416	break;
417	#endif
418	#ifdef B460800
419	case 460800:
420	speed = B115200;
421	break;
422	#endif
423	default:
424	speed = B9600;
425	break;
426	}
427
428	#ifdef CBAUD
429	ptermios->c_cflag &= ~CBAUD;
430	ptermios->c_cflag \|= speed;
431	#else
432	/* on systems with separate ispeed and ospeed, we can remember the speed
433	in ispeed while changing DTR with ospeed */
434	cfsetispeed(pser_inf->ptermios, speed);
435	cfsetospeed(pser_inf->ptermios, pser_inf->dtr ? speed : 0);
436	#endif
437
438	ptermios->c_cflag &= ~(CSTOPB \| PARENB \| PARODD \| CSIZE \| CRTSCTS);
439	switch (pser_inf->stop_bits)
440	{
441	case STOP_BITS_2:
442	ptermios->c_cflag \|= CSTOPB;
443	break;
444	default:
445	ptermios->c_cflag &= ~CSTOPB;
446	break;
447	}
448
449	switch (pser_inf->parity)
450	{
451	case EVEN_PARITY:
452	ptermios->c_cflag \|= PARENB;
453	break;
454	case ODD_PARITY:
455	ptermios->c_cflag \|= PARENB \| PARODD;
456	break;
457	case NO_PARITY:
458	ptermios->c_cflag &= ~(PARENB \| PARODD);
459	break;
460	}
461
462	switch (pser_inf->word_length)
463	{
464	case 5:
465	ptermios->c_cflag \|= CS5;
466	break;
467	case 6:
468	ptermios->c_cflag \|= CS6;
469	break;
470	case 7:
471	ptermios->c_cflag \|= CS7;
472	break;
473	default:
474	ptermios->c_cflag \|= CS8;
475	break;
476	}
477
478	#if 0
479	if (pser_inf->rts)
480	ptermios->c_cflag \|= CRTSCTS;
481	else
482	ptermios->c_cflag &= ~CRTSCTS;
483	#endif
484
485	if (pser_inf->control & SERIAL_CTS_HANDSHAKE)
486	{
487	ptermios->c_cflag \|= CRTSCTS;
488	}
489	else
490	{
491	ptermios->c_cflag &= ~CRTSCTS;
492	}
493
494
495	if (pser_inf->xonoff & SERIAL_XON_HANDSHAKE)
496	{
497	ptermios->c_iflag \|= IXON \| IMAXBEL;
498	}
499	if (pser_inf->xonoff & SERIAL_XOFF_HANDSHAKE)
500	{
501	ptermios->c_iflag \|= IXOFF \| IMAXBEL;
502	}
503
504	if ((pser_inf->xonoff & (SERIAL_XOFF_HANDSHAKE \| SERIAL_XON_HANDSHAKE)) == 0)
505	{
506	ptermios->c_iflag &= ~IXON;
507	ptermios->c_iflag &= ~IXOFF;
508	}
509
510	ptermios->c_cc[VSTART] = pser_inf->chars[SERIAL_CHAR_XON];
511	ptermios->c_cc[VSTOP] = pser_inf->chars[SERIAL_CHAR_XOFF];
512	ptermios->c_cc[VEOF] = pser_inf->chars[SERIAL_CHAR_EOF];
513	ptermios->c_cc[VINTR] = pser_inf->chars[SERIAL_CHAR_BREAK];
514	ptermios->c_cc[VKILL] = pser_inf->chars[SERIAL_CHAR_ERROR];
515
516	tcsetattr(serial_fd, TCSANOW, ptermios);
517	}
518
519	/* Enumeration of devices from rdesktop.c */
520	/* returns numer of units found and initialized. */
521	/* optarg looks like ':com1=/dev/ttyS0' */
522	/* when it arrives to this function. */
523	/* :com1=/dev/ttyS0,com2=/dev/ttyS1 */
524	int
525	serial_enum_devices(uint32 * id, char *optarg)
526	{
527	SERIAL_DEVICE *pser_inf;
528
529	char *pos = optarg;
530	char *pos2;
531	int count = 0;
532
533	/* skip the first colon */
534	optarg++;
535	while ((pos = next_arg(optarg, ',')) && *id < RDPDR_MAX_DEVICES)
536	{
537	/* Init data structures for device */
538	pser_inf = (SERIAL_DEVICE *) xmalloc(sizeof(SERIAL_DEVICE));
539	pser_inf->ptermios = (struct termios *) xmalloc(sizeof(struct termios));
540	memset(pser_inf->ptermios, 0, sizeof(struct termios));
541	pser_inf->pold_termios = (struct termios *) xmalloc(sizeof(struct termios));
542	memset(pser_inf->pold_termios, 0, sizeof(struct termios));
543
544	pos2 = next_arg(optarg, '=');
545	strcpy(g_rdpdr_device[*id].name, optarg);
546
547	toupper_str(g_rdpdr_device[*id].name);
548
549	g_rdpdr_device[*id].local_path = xmalloc(strlen(pos2) + 1);
550	strcpy(g_rdpdr_device[*id].local_path, pos2);
551	printf("SERIAL %s to %s\n", g_rdpdr_device[*id].name,
552	g_rdpdr_device[*id].local_path);
553	/* set device type */
554	g_rdpdr_device[*id].device_type = DEVICE_TYPE_SERIAL;
555	g_rdpdr_device[id].pdevice_data = (void ) pser_inf;
556	count++;
557	(*id)++;
558
559	optarg = pos;
560	}
561	return count;
562	}
563
564	static RD_NTSTATUS
565	serial_create(uint32 device_id, uint32 access, uint32 share_mode, uint32 disposition,
566	uint32 flags_and_attributes, char filename, RD_NTHANDLE handle)
567	{
568	RD_NTHANDLE serial_fd;
569	SERIAL_DEVICE *pser_inf;
570	struct termios *ptermios;
571
572	pser_inf = (SERIAL_DEVICE *) g_rdpdr_device[device_id].pdevice_data;
573	ptermios = pser_inf->ptermios;
574	serial_fd = open(g_rdpdr_device[device_id].local_path, O_RDWR \| O_NOCTTY \| O_NONBLOCK);
575
576	if (serial_fd == -1)
577	{
578	perror("open");
579	return RD_STATUS_ACCESS_DENIED;
580	}
581
582	if (!get_termios(pser_inf, serial_fd))
583	{
584	printf("INFO: SERIAL %s access denied\n", g_rdpdr_device[device_id].name);
585	fflush(stdout);
586	return RD_STATUS_ACCESS_DENIED;
587	}
588
589	/* Store handle for later use */
590	g_rdpdr_device[device_id].handle = serial_fd;
591
592	/* some sane information */
593	DEBUG_SERIAL(("INFO: SERIAL %s to %s\nINFO: speed %u baud, stop bits %u, parity %u, word length %u bits, dtr %u, rts %u\n", g_rdpdr_device[device_id].name, g_rdpdr_device[device_id].local_path, pser_inf->baud_rate, pser_inf->stop_bits, pser_inf->parity, pser_inf->word_length, pser_inf->dtr, pser_inf->rts));
594
595	pser_inf->ptermios->c_iflag &=
596	~(IGNBRK \| BRKINT \| PARMRK \| ISTRIP \| INLCR \| IGNCR \| ICRNL \| IXON);
597	pser_inf->ptermios->c_oflag &= ~OPOST;
598	pser_inf->ptermios->c_lflag &= ~(ECHO \| ECHONL \| ICANON \| ISIG \| IEXTEN);
599	pser_inf->ptermios->c_cflag &= ~(CSIZE \| PARENB);
600	pser_inf->ptermios->c_cflag \|= CS8;
601
602	tcsetattr(serial_fd, TCSANOW, pser_inf->ptermios);
603
604	pser_inf->event_txempty = 0;
605	pser_inf->event_cts = 0;
606	pser_inf->event_dsr = 0;
607	pser_inf->event_rlsd = 0;
608	pser_inf->event_pending = 0;
609
610	*handle = serial_fd;
611
612	/* all read and writes should be non blocking */
613	if (fcntl(*handle, F_SETFL, O_NONBLOCK) == -1)
614	perror("fcntl");
615
616	pser_inf->read_total_timeout_constant = 5;
617
618	return RD_STATUS_SUCCESS;
619	}
620
621	static RD_NTSTATUS
622	serial_close(RD_NTHANDLE handle)
623	{
624	int i = get_device_index(handle);
625	if (i >= 0)
626	g_rdpdr_device[i].handle = 0;
627
628	rdpdr_abort_io(handle, 0, RD_STATUS_TIMEOUT);
629	close(handle);
630	return RD_STATUS_SUCCESS;
631	}
632
633	static RD_NTSTATUS
634	serial_read(RD_NTHANDLE handle, uint8 * data, uint32 length, uint32 offset, uint32 * result)
635	{
636	long timeout;
637	SERIAL_DEVICE *pser_inf;
638	struct termios *ptermios;
639	#ifdef WITH_DEBUG_SERIAL
640	int bytes_inqueue;
641	#endif
642
643
644	timeout = 90;
645	pser_inf = get_serial_info(handle);
646	ptermios = pser_inf->ptermios;
647
648	/* Set timeouts kind of like the windows serial timeout parameters. Multiply timeout
649	with requested read size */
650	if (pser_inf->read_total_timeout_multiplier \| pser_inf->read_total_timeout_constant)
651	{
652	timeout =
653	(pser_inf->read_total_timeout_multiplier * length +
654	pser_inf->read_total_timeout_constant + 99) / 100;
655	}
656	else if (pser_inf->read_interval_timeout)
657	{
658	timeout = (pser_inf->read_interval_timeout * length + 99) / 100;
659	}
660
661	/* If a timeout is set, do a blocking read, which times out after some time.
662	It will make rdesktop less responsive, but it will improve serial performance, by not
663	reading one character at a time. */
664	if (timeout == 0)
665	{
666	ptermios->c_cc[VTIME] = 0;
667	ptermios->c_cc[VMIN] = 0;
668	}
669	else
670	{
671	ptermios->c_cc[VTIME] = timeout;
672	ptermios->c_cc[VMIN] = 1;
673	}
674	tcsetattr(handle, TCSANOW, ptermios);
675
676	#if defined(WITH_DEBUG_SERIAL) && defined(TIOCINQ)
677	ioctl(handle, TIOCINQ, &bytes_inqueue);
678	DEBUG_SERIAL(("serial_read inqueue: %d expected %d\n", bytes_inqueue, length));
679	#endif
680
681	*result = read(handle, data, length);
682
683	#ifdef WITH_DEBUG_SERIAL
684	DEBUG_SERIAL(("serial_read Bytes %d\n", *result));
685	if (*result > 0)
686	hexdump(data, *result);
687	#endif
688
689	return RD_STATUS_SUCCESS;
690	}
691
692	static RD_NTSTATUS
693	serial_write(RD_NTHANDLE handle, uint8 * data, uint32 length, uint32 offset, uint32 * result)
694	{
695	SERIAL_DEVICE *pser_inf;
696
697	pser_inf = get_serial_info(handle);
698
699	*result = write(handle, data, length);
700
701	if (*result > 0)
702	pser_inf->event_txempty = *result;
703
704	DEBUG_SERIAL(("serial_write length %d, offset %d result %d\n", length, offset, *result));
705
706	return RD_STATUS_SUCCESS;
707	}
708
709	static RD_NTSTATUS
710	serial_device_control(RD_NTHANDLE handle, uint32 request, STREAM in, STREAM out)
711	{
712	int purge_mask;
713	uint32 result, modemstate;
714	uint8 immediate;
715	SERIAL_DEVICE *pser_inf;
716	struct termios *ptermios;
717
718	if ((request >> 16) != FILE_DEVICE_SERIAL_PORT)
719	return RD_STATUS_INVALID_PARAMETER;
720
721	pser_inf = get_serial_info(handle);
722	ptermios = pser_inf->ptermios;
723
724	/* extract operation */
725	request >>= 2;
726	request &= 0xfff;
727
728	switch (request)
729	{
730	case SERIAL_SET_BAUD_RATE:
731	in_uint32_le(in, pser_inf->baud_rate);
732	set_termios(pser_inf, handle);
733	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_BAUD_RATE %d\n",
734	pser_inf->baud_rate));
735	break;
736	case SERIAL_GET_BAUD_RATE:
737	out_uint32_le(out, pser_inf->baud_rate);
738	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_BAUD_RATE %d\n",
739	pser_inf->baud_rate));
740	break;
741	case SERIAL_SET_QUEUE_SIZE:
742	in_uint32_le(in, pser_inf->queue_in_size);
743	in_uint32_le(in, pser_inf->queue_out_size);
744	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_QUEUE_SIZE in %d out %d\n",
745	pser_inf->queue_in_size, pser_inf->queue_out_size));
746	break;
747	case SERIAL_SET_LINE_CONTROL:
748	in_uint8(in, pser_inf->stop_bits);
749	in_uint8(in, pser_inf->parity);
750	in_uint8(in, pser_inf->word_length);
751	set_termios(pser_inf, handle);
752	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_LINE_CONTROL stop %d parity %d word %d\n", pser_inf->stop_bits, pser_inf->parity, pser_inf->word_length));
753	break;
754	case SERIAL_GET_LINE_CONTROL:
755	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_LINE_CONTROL\n"));
756	out_uint8(out, pser_inf->stop_bits);
757	out_uint8(out, pser_inf->parity);
758	out_uint8(out, pser_inf->word_length);
759	break;
760	case SERIAL_IMMEDIATE_CHAR:
761	DEBUG_SERIAL(("serial_ioctl -> SERIAL_IMMEDIATE_CHAR\n"));
762	in_uint8(in, immediate);
763	serial_write(handle, &immediate, 1, 0, &result);
764	break;
765	case SERIAL_CONFIG_SIZE:
766	DEBUG_SERIAL(("serial_ioctl -> SERIAL_CONFIG_SIZE\n"));
767	out_uint32_le(out, 0);
768	break;
769	case SERIAL_GET_CHARS:
770	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_CHARS\n"));
771	out_uint8a(out, pser_inf->chars, 6);
772	break;
773	case SERIAL_SET_CHARS:
774	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_CHARS\n"));
775	in_uint8a(in, pser_inf->chars, 6);
776	#ifdef WITH_DEBUG_SERIAL
777	hexdump(pser_inf->chars, 6);
778	#endif
779	set_termios(pser_inf, handle);
780	break;
781	case SERIAL_GET_HANDFLOW:
782	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_HANDFLOW\n"));
783	get_termios(pser_inf, handle);
784	out_uint32_le(out, pser_inf->control);
785	out_uint32_le(out, pser_inf->xonoff); /* Xon/Xoff */
786	out_uint32_le(out, pser_inf->onlimit);
787	out_uint32_le(out, pser_inf->offlimit);
788	break;
789	case SERIAL_SET_HANDFLOW:
790	in_uint32_le(in, pser_inf->control);
791	in_uint32_le(in, pser_inf->xonoff);
792	in_uint32_le(in, pser_inf->onlimit);
793	in_uint32_le(in, pser_inf->offlimit);
794	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_HANDFLOW %x %x %x %x\n",
795	pser_inf->control, pser_inf->xonoff, pser_inf->onlimit,
796	pser_inf->onlimit));
797	set_termios(pser_inf, handle);
798	break;
799	case SERIAL_SET_TIMEOUTS:
800	in_uint32(in, pser_inf->read_interval_timeout);
801	in_uint32(in, pser_inf->read_total_timeout_multiplier);
802	in_uint32(in, pser_inf->read_total_timeout_constant);
803	in_uint32(in, pser_inf->write_total_timeout_multiplier);
804	in_uint32(in, pser_inf->write_total_timeout_constant);
805	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_TIMEOUTS read timeout %d %d %d\n",
806	pser_inf->read_interval_timeout,
807	pser_inf->read_total_timeout_multiplier,
808	pser_inf->read_total_timeout_constant));
809	break;
810	case SERIAL_GET_TIMEOUTS:
811	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_TIMEOUTS read timeout %d %d %d\n",
812	pser_inf->read_interval_timeout,
813	pser_inf->read_total_timeout_multiplier,
814	pser_inf->read_total_timeout_constant));
815
816	out_uint32(out, pser_inf->read_interval_timeout);
817	out_uint32(out, pser_inf->read_total_timeout_multiplier);
818	out_uint32(out, pser_inf->read_total_timeout_constant);
819	out_uint32(out, pser_inf->write_total_timeout_multiplier);
820	out_uint32(out, pser_inf->write_total_timeout_constant);
821	break;
822	case SERIAL_GET_WAIT_MASK:
823	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_WAIT_MASK %X\n",
824	pser_inf->wait_mask));
825	out_uint32(out, pser_inf->wait_mask);
826	break;
827	case SERIAL_SET_WAIT_MASK:
828	in_uint32(in, pser_inf->wait_mask);
829	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_WAIT_MASK %X\n",
830	pser_inf->wait_mask));
831	break;
832	case SERIAL_SET_DTR:
833	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_DTR\n"));
834	ioctl(handle, TIOCMGET, &result);
835	result \|= TIOCM_DTR;
836	ioctl(handle, TIOCMSET, &result);
837	pser_inf->dtr = 1;
838	break;
839	case SERIAL_CLR_DTR:
840	DEBUG_SERIAL(("serial_ioctl -> SERIAL_CLR_DTR\n"));
841	ioctl(handle, TIOCMGET, &result);
842	result &= ~TIOCM_DTR;
843	ioctl(handle, TIOCMSET, &result);
844	pser_inf->dtr = 0;
845	break;
846	case SERIAL_SET_RTS:
847	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_RTS\n"));
848	ioctl(handle, TIOCMGET, &result);
849	result \|= TIOCM_RTS;
850	ioctl(handle, TIOCMSET, &result);
851	pser_inf->rts = 1;
852	break;
853	case SERIAL_CLR_RTS:
854	DEBUG_SERIAL(("serial_ioctl -> SERIAL_CLR_RTS\n"));
855	ioctl(handle, TIOCMGET, &result);
856	result &= ~TIOCM_RTS;
857	ioctl(handle, TIOCMSET, &result);
858	pser_inf->rts = 0;
859	break;
860	case SERIAL_GET_MODEMSTATUS:
861	modemstate = 0;
862	#ifdef TIOCMGET
863	ioctl(handle, TIOCMGET, &result);
864	if (result & TIOCM_CTS)
865	modemstate \|= SERIAL_MS_CTS;
866	if (result & TIOCM_DSR)
867	modemstate \|= SERIAL_MS_DSR;
868	if (result & TIOCM_RNG)
869	modemstate \|= SERIAL_MS_RNG;
870	if (result & TIOCM_CAR)
871	modemstate \|= SERIAL_MS_CAR;
872	if (result & TIOCM_DTR)
873	modemstate \|= SERIAL_MS_DTR;
874	if (result & TIOCM_RTS)
875	modemstate \|= SERIAL_MS_RTS;
876	#endif
877	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_MODEMSTATUS %X\n", modemstate));
878	out_uint32_le(out, modemstate);
879	break;
880	case SERIAL_GET_COMMSTATUS:
881	out_uint32_le(out, 0); /* Errors */
882	out_uint32_le(out, 0); /* Hold reasons */
883
884	result = 0;
885	#ifdef TIOCINQ
886	ioctl(handle, TIOCINQ, &result);
887	#endif
888	out_uint32_le(out, result); /* Amount in in queue */
889	if (result)
890	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_COMMSTATUS in queue %d\n",
891	result));
892
893	result = 0;
894	#ifdef TIOCOUTQ
895	ioctl(handle, TIOCOUTQ, &result);
896	#endif
897	out_uint32_le(out, result); /* Amount in out queue */
898	if (result)
899	DEBUG_SERIAL(("serial_ioctl -> SERIAL_GET_COMMSTATUS out queue %d\n", result));
900
901	out_uint8(out, 0); /* EofReceived */
902	out_uint8(out, 0); /* WaitForImmediate */
903	break;
904	case SERIAL_PURGE:
905	in_uint32(in, purge_mask);
906	DEBUG_SERIAL(("serial_ioctl -> SERIAL_PURGE purge_mask %X\n", purge_mask));
907	if ((purge_mask & SERIAL_PURGE_TXCLEAR)
908	&& (purge_mask & SERIAL_PURGE_RXCLEAR))
909	tcflush(handle, TCIOFLUSH);
910	else if (purge_mask & SERIAL_PURGE_TXCLEAR)
911	tcflush(handle, TCOFLUSH);
912	else if (purge_mask & SERIAL_PURGE_RXCLEAR)
913	tcflush(handle, TCIFLUSH);
914	if (purge_mask & SERIAL_PURGE_TXABORT)
915	rdpdr_abort_io(handle, 4, RD_STATUS_CANCELLED);
916	if (purge_mask & SERIAL_PURGE_RXABORT)
917	rdpdr_abort_io(handle, 3, RD_STATUS_CANCELLED);
918	break;
919	case SERIAL_WAIT_ON_MASK:
920	DEBUG_SERIAL(("serial_ioctl -> SERIAL_WAIT_ON_MASK %X\n",
921	pser_inf->wait_mask));
922	pser_inf->event_pending = 1;
923	if (serial_get_event(handle, &result))
924	{
925	DEBUG_SERIAL(("WAIT end event = %x\n", result));
926	out_uint32_le(out, result);
927	break;
928	}
929	return RD_STATUS_PENDING;
930	break;
931	case SERIAL_SET_BREAK_ON:
932	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_BREAK_ON\n"));
933	tcsendbreak(handle, 0);
934	break;
935	case SERIAL_RESET_DEVICE:
936	DEBUG_SERIAL(("serial_ioctl -> SERIAL_RESET_DEVICE\n"));
937	break;
938	case SERIAL_SET_BREAK_OFF:
939	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_BREAK_OFF\n"));
940	break;
941	case SERIAL_SET_XOFF:
942	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_XOFF\n"));
943	break;
944	case SERIAL_SET_XON:
945	DEBUG_SERIAL(("serial_ioctl -> SERIAL_SET_XON\n"));
946	tcflow(handle, TCION);
947	break;
948	default:
949	unimpl("SERIAL IOCTL %d\n", request);
950	return RD_STATUS_INVALID_PARAMETER;
951	}
952
953	return RD_STATUS_SUCCESS;
954	}
955
956	RD_BOOL
957	serial_get_event(RD_NTHANDLE handle, uint32 * result)
958	{
959	int index;
960	SERIAL_DEVICE *pser_inf;
961	int bytes;
962	RD_BOOL ret = False;
963
964	*result = 0;
965	index = get_device_index(handle);
966	if (index < 0)
967	return False;
968
969	#ifdef TIOCINQ
970	pser_inf = (SERIAL_DEVICE *) g_rdpdr_device[index].pdevice_data;
971
972	ioctl(handle, TIOCINQ, &bytes);
973
974	if (bytes > 0)
975	{
976	DEBUG_SERIAL(("serial_get_event Bytes %d\n", bytes));
977	if (bytes > pser_inf->event_rlsd)
978	{
979	pser_inf->event_rlsd = bytes;
980	if (pser_inf->wait_mask & SERIAL_EV_RLSD)
981	{
982	DEBUG_SERIAL(("Event -> SERIAL_EV_RLSD \n"));
983	*result \|= SERIAL_EV_RLSD;
984	ret = True;
985	}
986
987	}
988
989	if ((bytes > 1) && (pser_inf->wait_mask & SERIAL_EV_RXFLAG))
990	{
991	DEBUG_SERIAL(("Event -> SERIAL_EV_RXFLAG Bytes %d\n", bytes));
992	*result \|= SERIAL_EV_RXFLAG;
993	ret = True;
994	}
995	if ((pser_inf->wait_mask & SERIAL_EV_RXCHAR))
996	{
997	DEBUG_SERIAL(("Event -> SERIAL_EV_RXCHAR Bytes %d\n", bytes));
998	*result \|= SERIAL_EV_RXCHAR;
999	ret = True;
1000	}
1001
1002	}
1003	else
1004	{
1005	pser_inf->event_rlsd = 0;
1006	}
1007	#endif
1008
1009	#ifdef TIOCOUTQ
1010	ioctl(handle, TIOCOUTQ, &bytes);
1011	if ((bytes == 0)
1012	&& (pser_inf->event_txempty > 0) && (pser_inf->wait_mask & SERIAL_EV_TXEMPTY))
1013	{
1014
1015	DEBUG_SERIAL(("Event -> SERIAL_EV_TXEMPTY\n"));
1016	*result \|= SERIAL_EV_TXEMPTY;
1017	ret = True;
1018	}
1019	pser_inf->event_txempty = bytes;
1020	#endif
1021
1022	ioctl(handle, TIOCMGET, &bytes);
1023	if ((bytes & TIOCM_DSR) != pser_inf->event_dsr)
1024	{
1025	pser_inf->event_dsr = bytes & TIOCM_DSR;
1026	if (pser_inf->wait_mask & SERIAL_EV_DSR)
1027	{
1028	DEBUG_SERIAL(("event -> SERIAL_EV_DSR %s\n",
1029	(bytes & TIOCM_DSR) ? "ON" : "OFF"));
1030	*result \|= SERIAL_EV_DSR;
1031	ret = True;
1032	}
1033	}
1034
1035	if ((bytes & TIOCM_CTS) != pser_inf->event_cts)
1036	{
1037	pser_inf->event_cts = bytes & TIOCM_CTS;
1038	if (pser_inf->wait_mask & SERIAL_EV_CTS)
1039	{
1040	DEBUG_SERIAL((" EVENT-> SERIAL_EV_CTS %s\n",
1041	(bytes & TIOCM_CTS) ? "ON" : "OFF"));
1042	*result \|= SERIAL_EV_CTS;
1043	ret = True;
1044	}
1045	}
1046
1047	if (ret)
1048	pser_inf->event_pending = 0;
1049
1050	return ret;
1051	}
1052
1053	/* Read timeout for a given file descripter (device) when adding fd's to select() */
1054	RD_BOOL
1055	serial_get_timeout(RD_NTHANDLE handle, uint32 length, uint32 * timeout, uint32 * itv_timeout)
1056	{
1057	int index;
1058	SERIAL_DEVICE *pser_inf;
1059
1060	index = get_device_index(handle);
1061	if (index < 0)
1062	return True;
1063
1064	if (g_rdpdr_device[index].device_type != DEVICE_TYPE_SERIAL)
1065	{
1066	return False;
1067	}
1068
1069	pser_inf = (SERIAL_DEVICE *) g_rdpdr_device[index].pdevice_data;
1070
1071	*timeout =
1072	pser_inf->read_total_timeout_multiplier * length +
1073	pser_inf->read_total_timeout_constant;
1074	*itv_timeout = pser_inf->read_interval_timeout;
1075	return True;
1076	}
1077
1078	DEVICE_FNS serial_fns = {
1079	serial_create,
1080	serial_close,
1081	serial_read,
1082	serial_write,
1083	serial_device_control
1084	};

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/RDP/client-1.8.4/serial.c@ 93010

Download in other formats: