tarcmd.cpp@ 73041

Last change on this file since 73041 was 72036, checked in by vboxsync, 7 years ago
RTTar: Implemented extracting hardlinked files by copying. This is very useful for extracting VBoxAll archives on windows. [build fix]
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 67.7 KB

Line
1	/* $Id: tarcmd.cpp 72036 2018-04-26 11:41:27Z vboxsync $ */
2	/** @file
3	* IPRT - A mini TAR Command.
4	*/
5
6	/*
7	* Copyright (C) 2010-2017 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*
17	* The contents of this file may alternatively be used under the terms
18	* of the Common Development and Distribution License Version 1.0
19	* (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	* VirtualBox OSE distribution, in which case the provisions of the
21	* CDDL are applicable instead of those of the GPL.
22	*
23	* You may elect to license modified versions of this file under the
24	* terms and conditions of either the GPL or the CDDL or both.
25	*/
26
27
28	/*********************************************************************************************************************************
29	* Header Files *
30	*********************************************************************************************************************************/
31	#include <iprt/zip.h>
32
33	#include <iprt/asm.h>
34	#include <iprt/buildconfig.h>
35	#include <iprt/ctype.h>
36	#include <iprt/dir.h>
37	#include <iprt/file.h>
38	#include <iprt/getopt.h>
39	#include <iprt/initterm.h>
40	#include <iprt/mem.h>
41	#include <iprt/message.h>
42	#include <iprt/param.h>
43	#include <iprt/path.h>
44	#include <iprt/stream.h>
45	#include <iprt/string.h>
46	#include <iprt/symlink.h>
47	#include <iprt/vfs.h>
48
49
50	/*********************************************************************************************************************************
51	* Defined Constants And Macros *
52	*********************************************************************************************************************************/
53	#define RTZIPTARCMD_OPT_DELETE 1000
54	#define RTZIPTARCMD_OPT_OWNER 1001
55	#define RTZIPTARCMD_OPT_GROUP 1002
56	#define RTZIPTARCMD_OPT_UTC 1003
57	#define RTZIPTARCMD_OPT_PREFIX 1004
58	#define RTZIPTARCMD_OPT_FILE_MODE_AND_MASK 1005
59	#define RTZIPTARCMD_OPT_FILE_MODE_OR_MASK 1006
60	#define RTZIPTARCMD_OPT_DIR_MODE_AND_MASK 1007
61	#define RTZIPTARCMD_OPT_DIR_MODE_OR_MASK 1008
62	#define RTZIPTARCMD_OPT_FORMAT 1009
63	#define RTZIPTARCMD_OPT_READ_AHEAD 1010
64	#define RTZIPTARCMD_OPT_USE_PUSH_FILE 1011
65
66	/** File format. */
67	typedef enum RTZIPTARCMDFORMAT
68	{
69	RTZIPTARCMDFORMAT_INVALID = 0,
70	/** Autodetect if possible, defaulting to TAR. */
71	RTZIPTARCMDFORMAT_AUTO_DEFAULT,
72	/** TAR. */
73	RTZIPTARCMDFORMAT_TAR,
74	/** XAR. */
75	RTZIPTARCMDFORMAT_XAR
76	} RTZIPTARCMDFORMAT;
77
78
79	/*********************************************************************************************************************************
80	* Structures and Typedefs *
81	*********************************************************************************************************************************/
82	/**
83	* IPRT TAR option structure.
84	*/
85	typedef struct RTZIPTARCMDOPS
86	{
87	/** The file format. */
88	RTZIPTARCMDFORMAT enmFormat;
89
90	/** The operation (Acdrtux or RTZIPTARCMD_OPT_DELETE). */
91	int iOperation;
92	/** The long operation option name. */
93	const char *pszOperation;
94
95	/** The directory to change into when packing and unpacking. */
96	const char *pszDirectory;
97	/** The tar file name. */
98	const char *pszFile;
99	/** Whether we're verbose or quiet. */
100	bool fVerbose;
101	/** Whether to preserve the original file owner when restoring. */
102	bool fPreserveOwner;
103	/** Whether to preserve the original file group when restoring. */
104	bool fPreserveGroup;
105	/** Whether to skip restoring the modification time (only time stored by the
106	* traditional TAR format). */
107	bool fNoModTime;
108	/** Whether to add a read ahead thread. */
109	bool fReadAhead;
110	/** Use RTVfsFsStrmPushFile instead of RTVfsFsStrmAdd for files. */
111	bool fUsePushFile;
112	/** The compressor/decompressor method to employ (0, z or j). */
113	char chZipper;
114
115	/** The owner to set. NULL if not applicable.
116	* Always resolved into uidOwner for extraction. */
117	const char *pszOwner;
118	/** The owner ID to set. NIL_RTUID if not applicable. */
119	RTUID uidOwner;
120	/** The group to set. NULL if not applicable.
121	* Always resolved into gidGroup for extraction. */
122	const char *pszGroup;
123	/** The group ID to set. NIL_RTGUID if not applicable. */
124	RTGID gidGroup;
125	/** Display the modification times in UTC instead of local time. */
126	bool fDisplayUtc;
127	/** File mode AND mask. */
128	RTFMODE fFileModeAndMask;
129	/** File mode OR mask. */
130	RTFMODE fFileModeOrMask;
131	/** Directory mode AND mask. */
132	RTFMODE fDirModeAndMask;
133	/** Directory mode OR mask. */
134	RTFMODE fDirModeOrMask;
135
136	/** What to prefix all names with when creating, adding, whatever. */
137	const char *pszPrefix;
138
139	/** The number of files(, directories or whatever) specified. */
140	uint32_t cFiles;
141	/** Array of files(, directories or whatever).
142	* Terminated by a NULL entry. */
143	const char * const *papszFiles;
144
145	/** The TAR format to create. */
146	RTZIPTARFORMAT enmTarFormat;
147	/** TAR creation flags. */
148	uint32_t fTarCreate;
149
150	} RTZIPTARCMDOPS;
151	/** Pointer to the IPRT tar options. */
152	typedef RTZIPTARCMDOPS *PRTZIPTARCMDOPS;
153
154	/**
155	* Callback used by rtZipTarDoWithMembers
156	*
157	* @returns rcExit or RTEXITCODE_FAILURE.
158	* @param pOpts The tar options.
159	* @param hVfsObj The tar object to display
160	* @param pszName The name.
161	* @param rcExit The current exit code.
162	*/
163	typedef RTEXITCODE (PFNDOWITHMEMBER)(PRTZIPTARCMDOPS pOpts, RTVFSOBJ hVfsObj, const char pszName, RTEXITCODE rcExit);
164
165
166	/**
167	* Checks if @a pszName is a member of @a papszNames, optionally returning the
168	* index.
169	*
170	* @returns true if the name is in the list, otherwise false.
171	* @param pszName The name to find.
172	* @param papszNames The array of names.
173	* @param piName Where to optionally return the array index.
174	*/
175	static bool rtZipTarCmdIsNameInArray(const char pszName, const char const papszNames, uint32_t piName)
176	{
177	for (uint32_t iName = 0; papszNames[iName]; iName++)
178	if (!strcmp(papszNames[iName], pszName))
179	{
180	if (piName)
181	*piName = iName;
182	return true;
183	}
184	return false;
185	}
186
187
188	/**
189	* Archives a file.
190	*
191	* @returns RTEXITCODE_SUCCESS or RTEXITCODE_FAILURE + printed message.
192	* @param pOpts The options.
193	* @param hVfsFss The TAR filesystem stream handle.
194	* @param pszSrc The file path or VFS spec.
195	* @param paObjInfo[3] Array of three FS object info structures. The first
196	* one is always filled with RTFSOBJATTRADD_UNIX info.
197	* The next two may contain owner and group names if
198	* available. Buffers can be modified.
199	* @param pszDst The name to archive the file under.
200	* @param pErrInfo Error info buffer (saves stack space).
201	*/
202	static RTEXITCODE rtZipTarCmdArchiveFile(PRTZIPTARCMDOPS pOpts, RTVFSFSSTREAM hVfsFss, const char *pszSrc,
203	RTFSOBJINFO paObjInfo[3], const char *pszDst, PRTERRINFOSTATIC pErrInfo)
204	{
205	if (pOpts->fVerbose)
206	RTPrintf("%s\n", pszDst);
207
208	/* Open the file. */
209	uint32_t offError;
210	RTVFSIOSTREAM hVfsIosSrc;
211	int rc = RTVfsChainOpenIoStream(pszSrc, RTFILE_O_READ \| RTFILE_O_OPEN \| RTFILE_O_DENY_NONE,
212	&hVfsIosSrc, &offError, RTErrInfoInitStatic(pErrInfo));
213	if (RT_FAILURE(rc))
214	return RTVfsChainMsgErrorExitFailure("RTVfsChainOpenIoStream", pszSrc, rc, offError, &pErrInfo->Core);
215
216	/* I/O stream to base object. */
217	RTVFSOBJ hVfsObjSrc = RTVfsObjFromIoStream(hVfsIosSrc);
218	if (hVfsObjSrc != NIL_RTVFSOBJ)
219	{
220	/*
221	* Add it to the stream. Got to variants here so we can test the
222	* RTVfsFsStrmPushFile API too.
223	*/
224	if (!pOpts->fUsePushFile)
225	rc = RTVfsFsStrmAdd(hVfsFss, pszDst, hVfsObjSrc, 0 /fFlags/);
226	else
227	{
228	uint32_t cObjInfo = 1 + (paObjInfo[1].Attr.enmAdditional == RTFSOBJATTRADD_UNIX_OWNER)
229	+ (paObjInfo[2].Attr.enmAdditional == RTFSOBJATTRADD_UNIX_GROUP);
230	RTVFSIOSTREAM hVfsIosDst;
231	rc = RTVfsFsStrmPushFile(hVfsFss, pszDst, paObjInfo[0].cbObject, paObjInfo, cObjInfo, 0 /fFlags/, &hVfsIosDst);
232	if (RT_SUCCESS(rc))
233	{
234	rc = RTVfsUtilPumpIoStreams(hVfsIosSrc, hVfsIosDst, 0);
235	RTVfsIoStrmRelease(hVfsIosDst);
236	}
237	}
238	RTVfsIoStrmRelease(hVfsIosSrc);
239	RTVfsObjRelease(hVfsObjSrc);
240
241	if (RT_SUCCESS(rc))
242	{
243	if (rc != VINF_SUCCESS)
244	RTMsgWarning("%Rrc adding '%s'", rc, pszDst);
245	return RTEXITCODE_SUCCESS;
246	}
247	return RTMsgErrorExitFailure("%Rrc adding '%s'", rc, pszDst);
248	}
249	RTVfsIoStrmRelease(hVfsIosSrc);
250	return RTMsgErrorExitFailure("RTVfsObjFromIoStream failed unexpectedly!");
251	}
252
253
254	/**
255	* Archives a directory recursively .
256	*
257	* @returns RTEXITCODE_SUCCESS or RTEXITCODE_FAILURE + printed message.
258	* @param pOpts The options.
259	* @param hVfsFss The TAR filesystem stream handle.
260	* @param pszSrc The directory path or VFS spec. We append to the
261	* buffer as we decend.
262	* @param cchSrc The length of the input.
263	* @param paObjInfo[3] Array of three FS object info structures. The first
264	* one is always filled with RTFSOBJATTRADD_UNIX info.
265	* The next two may contain owner and group names if
266	* available. The three buffers can be reused.
267	* @param pszDst The name to archive it the under. We append to the
268	* buffer as we decend.
269	* @param cchDst The length of the input.
270	* @param pErrInfo Error info buffer (saves stack space).
271	*/
272	static RTEXITCODE rtZipTarCmdArchiveDir(PRTZIPTARCMDOPS pOpts, RTVFSFSSTREAM hVfsFss, char pszSrc[RTPATH_MAX], size_t cchSrc,
273	RTFSOBJINFO paObjInfo[3], char pszDst[RTPATH_MAX], size_t cchDst,
274	PRTERRINFOSTATIC pErrInfo)
275	{
276	RT_NOREF(pOpts, hVfsFss, pszSrc, cchSrc, paObjInfo, pszDst, cchDst, pErrInfo);
277	return RTMsgErrorExitFailure("Adding directories has not yet been implemented! Sorry.");
278	}
279
280
281
282	/**
283	* Opens the output archive specified by the options.
284	*
285	* @returns RTEXITCODE_SUCCESS or RTEXITCODE_FAILURE + printed message.
286	* @param pOpts The options.
287	* @param phVfsFss Where to return the TAR filesystem stream handle.
288	*/
289	static RTEXITCODE rtZipTarCmdOpenOutputArchive(PRTZIPTARCMDOPS pOpts, PRTVFSFSSTREAM phVfsFss)
290	{
291	int rc;
292	*phVfsFss = NIL_RTVFSFSSTREAM;
293
294	/*
295	* Open the output file.
296	*/
297	RTVFSIOSTREAM hVfsIos;
298	if ( pOpts->pszFile
299	&& strcmp(pOpts->pszFile, "-") != 0)
300	{
301	uint32_t offError = 0;
302	RTERRINFOSTATIC ErrInfo;
303	rc = RTVfsChainOpenIoStream(pOpts->pszFile, RTFILE_O_WRITE \| RTFILE_O_DENY_WRITE \| RTFILE_O_CREATE_REPLACE,
304	&hVfsIos, &offError, RTErrInfoInitStatic(&ErrInfo));
305	if (RT_FAILURE(rc))
306	return RTVfsChainMsgErrorExitFailure("RTVfsChainOpenIoStream", pOpts->pszFile, rc, offError, &ErrInfo.Core);
307	}
308	else
309	{
310	rc = RTVfsIoStrmFromStdHandle(RTHANDLESTD_OUTPUT,
311	RTFILE_O_WRITE \| RTFILE_O_DENY_WRITE \| RTFILE_O_OPEN,
312	true /fLeaveOpen/,
313	&hVfsIos);
314	if (RT_FAILURE(rc))
315	return RTMsgErrorExitFailure("Failed to prepare standard output for writing: %Rrc", rc);
316	}
317
318	/*
319	* Pass it thru a compressor?
320	*/
321	RTVFSIOSTREAM hVfsIosComp = NIL_RTVFSIOSTREAM;
322	switch (pOpts->chZipper)
323	{
324	/* no */
325	case '\0':
326	rc = VINF_SUCCESS;
327	break;
328
329	/* gunzip */
330	case 'z':
331	rc = RTZipGzipCompressIoStream(hVfsIos, 0 /fFlags/, 6, &hVfsIosComp);
332	if (RT_FAILURE(rc))
333	RTMsgError("Failed to open gzip decompressor: %Rrc", rc);
334	break;
335
336	/* bunzip2 */
337	case 'j':
338	rc = VERR_NOT_SUPPORTED;
339	RTMsgError("bzip2 is not supported by this build");
340	break;
341
342	/* bug */
343	default:
344	rc = VERR_INTERNAL_ERROR_2;
345	RTMsgError("unknown decompression method '%c'", pOpts->chZipper);
346	break;
347	}
348	if (RT_FAILURE(rc))
349	{
350	RTVfsIoStrmRelease(hVfsIos);
351	return RTEXITCODE_FAILURE;
352	}
353
354	if (hVfsIosComp != NIL_RTVFSIOSTREAM)
355	{
356	RTVfsIoStrmRelease(hVfsIos);
357	hVfsIos = hVfsIosComp;
358	hVfsIosComp = NIL_RTVFSIOSTREAM;
359	}
360
361	/*
362	* Open the filesystem stream creator.
363	*/
364	if ( pOpts->enmFormat == RTZIPTARCMDFORMAT_TAR
365	\|\| pOpts->enmFormat == RTZIPTARCMDFORMAT_AUTO_DEFAULT)
366	{
367	RTVFSFSSTREAM hVfsFss;
368	rc = RTZipTarFsStreamToIoStream(hVfsIos, pOpts->enmTarFormat, pOpts->fTarCreate, &hVfsFss);
369	if (RT_SUCCESS(rc))
370	{
371	/*
372	* Set transformation options.
373	*/
374	rc = RTZipTarFsStreamSetFileMode(hVfsFss, pOpts->fFileModeAndMask, pOpts->fFileModeOrMask);
375	if (RT_SUCCESS(rc))
376	{
377	rc = RTZipTarFsStreamSetDirMode(hVfsFss, pOpts->fDirModeAndMask, pOpts->fDirModeOrMask);
378	if (RT_FAILURE(rc))
379	RTMsgError("RTZipTarFsStreamSetDirMode(%o,%o) failed: %Rrc", pOpts->fDirModeAndMask, pOpts->fDirModeOrMask, rc);
380	}
381	else
382	RTMsgError("RTZipTarFsStreamSetFileMode(%o,%o) failed: %Rrc", pOpts->fFileModeAndMask, pOpts->fFileModeOrMask, rc);
383	if ((pOpts->pszOwner \|\| pOpts->uidOwner != NIL_RTUID) && RT_SUCCESS(rc))
384	{
385	rc = RTZipTarFsStreamSetOwner(hVfsFss, pOpts->uidOwner, pOpts->pszOwner);
386	if (RT_FAILURE(rc))
387	RTMsgError("RTZipTarFsStreamSetOwner(%d,%s) failed: %Rrc", pOpts->uidOwner, pOpts->pszOwner, rc);
388	}
389	if ((pOpts->pszGroup \|\| pOpts->gidGroup != NIL_RTGID) && RT_SUCCESS(rc))
390	{
391	rc = RTZipTarFsStreamSetGroup(hVfsFss, pOpts->gidGroup, pOpts->pszGroup);
392	if (RT_FAILURE(rc))
393	RTMsgError("RTZipTarFsStreamSetGroup(%d,%s) failed: %Rrc", pOpts->gidGroup, pOpts->pszGroup, rc);
394	}
395	if (RT_SUCCESS(rc))
396	*phVfsFss = hVfsFss;
397	else
398	{
399	RTVfsFsStrmRelease(hVfsFss);
400	*phVfsFss = NIL_RTVFSFSSTREAM;
401	}
402	}
403	else
404	rc = RTMsgErrorExitFailure("Failed to open tar filesystem stream: %Rrc", rc);
405	}
406	else
407	rc = VERR_NOT_SUPPORTED;
408	RTVfsIoStrmRelease(hVfsIos);
409	if (RT_FAILURE(rc))
410	return RTMsgErrorExitFailure("Failed to open tar filesystem stream: %Rrc", rc);
411
412	return RTEXITCODE_SUCCESS;
413	}
414
415
416	/**
417	* Implements archive creation.
418	*
419	* @returns RTEXITCODE_SUCCESS or RTEXITCODE_FAILURE + printed message.
420	* @param pOpts The options.
421	*/
422	static RTEXITCODE rtZipTarCreate(PRTZIPTARCMDOPS pOpts)
423	{
424	/*
425	* Refuse to create empty archive.
426	*/
427	if (pOpts->cFiles == 0)
428	return RTMsgErrorExitFailure("Nothing to archive - refusing to create empty archive!");
429
430	/*
431	* First open the output file.
432	*/
433	RTVFSFSSTREAM hVfsFss;
434	RTEXITCODE rcExit = rtZipTarCmdOpenOutputArchive(pOpts, &hVfsFss);
435	if (rcExit != RTEXITCODE_SUCCESS)
436	return rcExit;
437
438	/*
439	* Process the input files.
440	*/
441	for (uint32_t iFile = 0; iFile < pOpts->cFiles; iFile++)
442	{
443	const char *pszFile = pOpts->papszFiles[iFile];
444
445	/*
446	* Construct/copy the source name.
447	*/
448	int rc = VINF_SUCCESS;
449	char szSrc[RTPATH_MAX];
450	if ( RTPathStartsWithRoot(pszFile)
451	\|\| RTVfsChainIsSpec(pszFile))
452	rc = RTStrCopy(szSrc, sizeof(szSrc), pszFile);
453	else
454	rc = RTPathJoin(szSrc, sizeof(szSrc), pOpts->pszDirectory ? pOpts->pszDirectory : ".", pOpts->papszFiles[iFile]);
455	if (RT_SUCCESS(rc))
456	{
457	/*
458	* Construct the archived name. We must strip leading root specifier.
459	*/
460	char *pszFinalPath = NULL;
461	char szDst[RTPATH_MAX];
462	const char *pszDst = pszFile;
463	if (RTVfsChainIsSpec(pszFile))
464	{
465	uint32_t offError;
466	rc = RTVfsChainQueryFinalPath(pszFile, &pszFinalPath, &offError);
467	if (RT_SUCCESS(rc))
468	pszDst = pszFinalPath;
469	else
470	rcExit = RTVfsChainMsgErrorExitFailure("RTVfsChainQueryFinalPath", pszFile, rc, offError, NULL);
471	}
472	if (RT_SUCCESS(rc))
473	{
474	pszDst = RTPathSkipRootSpec(pszDst);
475	if (*pszDst == '\0')
476	{
477	pszDst = pOpts->pszPrefix ? pOpts->pszPrefix : ".";
478	rc = RTStrCopy(szDst, sizeof(szDst), pszDst);
479	}
480	else
481	{
482	if (pOpts->pszPrefix)
483	rc = RTPathJoin(szDst, sizeof(szDst), pOpts->pszPrefix, pszDst);
484	else
485	rc = RTStrCopy(szDst, sizeof(szDst), pszDst);
486	}
487	if (RT_SUCCESS(rc))
488	{
489	/*
490	* What kind of object is this and what affiliations does it have?
491	*/
492	RTERRINFOSTATIC ErrInfo;
493	uint32_t offError;
494	RTFSOBJINFO aObjInfo[3];
495	rc = RTVfsChainQueryInfo(szSrc, &aObjInfo[0], RTFSOBJATTRADD_UNIX, RTPATH_F_ON_LINK,
496	&offError, RTErrInfoInitStatic(&ErrInfo));
497	if (RT_SUCCESS(rc))
498	{
499
500	rc = RTVfsChainQueryInfo(szSrc, &aObjInfo[1], RTFSOBJATTRADD_UNIX_OWNER, RTPATH_F_ON_LINK,
501	&offError, RTErrInfoInitStatic(&ErrInfo));
502	if (RT_SUCCESS(rc))
503	{
504	rc = RTVfsChainQueryInfo(szSrc, &aObjInfo[2], RTFSOBJATTRADD_UNIX_GROUP, RTPATH_F_ON_LINK,
505	&offError, RTErrInfoInitStatic(&ErrInfo));
506	if (RT_FAILURE(rc))
507	RT_ZERO(aObjInfo[2]);
508	}
509	else
510	{
511	RT_ZERO(aObjInfo[1]);
512	RT_ZERO(aObjInfo[2]);
513	}
514
515	/*
516	* Process on an object type basis.
517	*/
518	RTEXITCODE rcExit2;
519	if (RTFS_IS_DIRECTORY(aObjInfo[0].Attr.fMode))
520	rcExit2 = rtZipTarCmdArchiveDir(pOpts, hVfsFss, szSrc, strlen(szSrc), aObjInfo,
521	szDst, strlen(szDst), &ErrInfo);
522	else if (RTFS_IS_FILE(aObjInfo[0].Attr.fMode))
523	rcExit2 = rtZipTarCmdArchiveFile(pOpts, hVfsFss, szSrc, aObjInfo, szDst, &ErrInfo);
524	else if (RTFS_IS_SYMLINK(aObjInfo[0].Attr.fMode))
525	rcExit2 = RTMsgErrorExitFailure("Symlink archiving is not implemented");
526	else if (RTFS_IS_FIFO(aObjInfo[0].Attr.fMode))
527	rcExit2 = RTMsgErrorExitFailure("FIFO archiving is not implemented");
528	else if (RTFS_IS_SOCKET(aObjInfo[0].Attr.fMode))
529	rcExit2 = RTMsgErrorExitFailure("Socket archiving is not implemented");
530	else if (RTFS_IS_DEV_CHAR(aObjInfo[0].Attr.fMode) \|\| RTFS_IS_DEV_BLOCK(aObjInfo[0].Attr.fMode))
531	rcExit2 = RTMsgErrorExitFailure("Device archiving is not implemented");
532	else if (RTFS_IS_WHITEOUT(aObjInfo[0].Attr.fMode))
533	rcExit2 = RTEXITCODE_SUCCESS;
534	else
535	rcExit2 = RTMsgErrorExitFailure("Unknown file type: %#x\n", aObjInfo[0].Attr.fMode);
536	if (rcExit2 != RTEXITCODE_SUCCESS)
537	rcExit = rcExit2;
538	}
539	else
540	rcExit = RTVfsChainMsgErrorExitFailure("RTVfsChainQueryInfo", pszFile, rc, offError, &ErrInfo.Core);
541	}
542	else
543	rcExit = RTMsgErrorExitFailure("archived file name is too long, skipping '%s' (%s)", pszDst, pszFile);
544	}
545	}
546	else
547	rcExit = RTMsgErrorExitFailure("input file name is too long, skipping '%s'", pszFile);
548	}
549
550	/*
551	* Finalize the archive.
552	*/
553	int rc = RTVfsFsStrmEnd(hVfsFss);
554	if (RT_FAILURE(rc))
555	rcExit = RTMsgErrorExitFailure("RTVfsFsStrmEnd failed: %Rrc", rc);
556
557	RTVfsFsStrmRelease(hVfsFss);
558	return rcExit;
559	}
560
561
562	/**
563	* Opens the input archive specified by the options.
564	*
565	* @returns RTEXITCODE_SUCCESS or RTEXITCODE_FAILURE + printed message.
566	* @param pOpts The options.
567	* @param phVfsFss Where to return the TAR filesystem stream handle.
568	*/
569	static RTEXITCODE rtZipTarCmdOpenInputArchive(PRTZIPTARCMDOPS pOpts, PRTVFSFSSTREAM phVfsFss)
570	{
571	int rc;
572
573	/*
574	* Open the input file.
575	*/
576	RTVFSIOSTREAM hVfsIos;
577	if ( pOpts->pszFile
578	&& strcmp(pOpts->pszFile, "-") != 0)
579	{
580	uint32_t offError = 0;
581	RTERRINFOSTATIC ErrInfo;
582	rc = RTVfsChainOpenIoStream(pOpts->pszFile, RTFILE_O_READ \| RTFILE_O_DENY_WRITE \| RTFILE_O_OPEN,
583	&hVfsIos, &offError, RTErrInfoInitStatic(&ErrInfo));
584	if (RT_FAILURE(rc))
585	return RTVfsChainMsgErrorExitFailure("RTVfsChainOpenIoStream", pOpts->pszFile, rc, offError, &ErrInfo.Core);
586	}
587	else
588	{
589	rc = RTVfsIoStrmFromStdHandle(RTHANDLESTD_INPUT,
590	RTFILE_O_READ \| RTFILE_O_DENY_WRITE \| RTFILE_O_OPEN,
591	true /fLeaveOpen/,
592	&hVfsIos);
593	if (RT_FAILURE(rc))
594	return RTMsgErrorExitFailure("Failed to prepare standard in for reading: %Rrc", rc);
595	}
596
597	/*
598	* Pass it thru a decompressor?
599	*/
600	RTVFSIOSTREAM hVfsIosDecomp = NIL_RTVFSIOSTREAM;
601	switch (pOpts->chZipper)
602	{
603	/* no */
604	case '\0':
605	rc = VINF_SUCCESS;
606	break;
607
608	/* gunzip */
609	case 'z':
610	rc = RTZipGzipDecompressIoStream(hVfsIos, 0 /fFlags/, &hVfsIosDecomp);
611	if (RT_FAILURE(rc))
612	RTMsgError("Failed to open gzip decompressor: %Rrc", rc);
613	break;
614
615	/* bunzip2 */
616	case 'j':
617	rc = VERR_NOT_SUPPORTED;
618	RTMsgError("bzip2 is not supported by this build");
619	break;
620
621	/* bug */
622	default:
623	rc = VERR_INTERNAL_ERROR_2;
624	RTMsgError("unknown decompression method '%c'", pOpts->chZipper);
625	break;
626	}
627	if (RT_FAILURE(rc))
628	{
629	RTVfsIoStrmRelease(hVfsIos);
630	return RTEXITCODE_FAILURE;
631	}
632
633	if (hVfsIosDecomp != NIL_RTVFSIOSTREAM)
634	{
635	RTVfsIoStrmRelease(hVfsIos);
636	hVfsIos = hVfsIosDecomp;
637	hVfsIosDecomp = NIL_RTVFSIOSTREAM;
638	}
639
640	/*
641	* Open the filesystem stream.
642	*/
643	if (pOpts->enmFormat == RTZIPTARCMDFORMAT_TAR)
644	rc = RTZipTarFsStreamFromIoStream(hVfsIos, 0/fFlags/, phVfsFss);
645	else if (pOpts->enmFormat == RTZIPTARCMDFORMAT_XAR)
646	#ifdef IPRT_WITH_XAR /* Requires C++ and XML, so only in some configruation of IPRT. */
647	rc = RTZipXarFsStreamFromIoStream(hVfsIos, 0/fFlags/, phVfsFss);
648	#else
649	rc = VERR_NOT_SUPPORTED;
650	#endif
651	else /** @todo make RTZipTarFsStreamFromIoStream fail if not tar file! */
652	rc = RTZipTarFsStreamFromIoStream(hVfsIos, 0/fFlags/, phVfsFss);
653	RTVfsIoStrmRelease(hVfsIos);
654	if (RT_FAILURE(rc))
655	return RTMsgErrorExitFailure("Failed to open tar filesystem stream: %Rrc", rc);
656
657	return RTEXITCODE_SUCCESS;
658	}
659
660
661	/**
662	* Worker for the --list and --extract commands.
663	*
664	* @returns The appropriate exit code.
665	* @param pOpts The tar options.
666	* @param pfnCallback The command specific callback.
667	*/
668	static RTEXITCODE rtZipTarDoWithMembers(PRTZIPTARCMDOPS pOpts, PFNDOWITHMEMBER pfnCallback)
669	{
670	/*
671	* Allocate a bitmap to go with the file list. This will be used to
672	* indicate which files we've processed and which not.
673	*/
674	uint32_t *pbmFound = NULL;
675	if (pOpts->cFiles)
676	{
677	pbmFound = (uint32_t )RTMemAllocZ(((pOpts->cFiles + 31) / 32) sizeof(uint32_t));
678	if (!pbmFound)
679	return RTMsgErrorExitFailure("Failed to allocate the found-file-bitmap");
680	}
681
682
683	/*
684	* Open the input archive.
685	*/
686	RTVFSFSSTREAM hVfsFssIn;
687	RTEXITCODE rcExit = rtZipTarCmdOpenInputArchive(pOpts, &hVfsFssIn);
688	if (rcExit == RTEXITCODE_SUCCESS)
689	{
690	/*
691	* Process the stream.
692	*/
693	for (;;)
694	{
695	/*
696	* Retrive the next object.
697	*/
698	char *pszName;
699	RTVFSOBJ hVfsObj;
700	int rc = RTVfsFsStrmNext(hVfsFssIn, &pszName, NULL, &hVfsObj);
701	if (RT_FAILURE(rc))
702	{
703	if (rc != VERR_EOF)
704	rcExit = RTMsgErrorExitFailure("RTVfsFsStrmNext returned %Rrc", rc);
705	break;
706	}
707
708	/*
709	* Should we process this entry?
710	*/
711	uint32_t iFile = UINT32_MAX;
712	if ( !pOpts->cFiles
713	\|\| rtZipTarCmdIsNameInArray(pszName, pOpts->papszFiles, &iFile) )
714	{
715	if (pbmFound)
716	ASMBitSet(pbmFound, iFile);
717
718	rcExit = pfnCallback(pOpts, hVfsObj, pszName, rcExit);
719	}
720
721	/*
722	* Release the current object and string.
723	*/
724	RTVfsObjRelease(hVfsObj);
725	RTStrFree(pszName);
726	}
727
728	/*
729	* Complain about any files we didn't find.
730	*/
731	for (uint32_t iFile = 0; iFile < pOpts->cFiles; iFile++)
732	if (!ASMBitTest(pbmFound, iFile))
733	{
734	RTMsgError("%s: Was not found in the archive", pOpts->papszFiles[iFile]);
735	rcExit = RTEXITCODE_FAILURE;
736	}
737
738	RTVfsFsStrmRelease(hVfsFssIn);
739	}
740	RTMemFree(pbmFound);
741	return rcExit;
742	}
743
744
745	/**
746	* Checks if the name contains any escape sequences.
747	*
748	* An escape sequence would generally be one or more '..' references. On DOS
749	* like system, something that would make up a drive letter reference is also
750	* considered an escape sequence.
751	*
752	* @returns true / false.
753	* @param pszName The name to consider.
754	*/
755	static bool rtZipTarHasEscapeSequence(const char *pszName)
756	{
757	#if defined(RT_OS_WINDOWS) \|\| defined(RT_OS_OS2)
758	if (pszName[0] == ':')
759	return true;
760	#endif
761	while (*pszName)
762	{
763	while (RTPATH_IS_SEP(*pszName))
764	pszName++;
765	if ( pszName[0] == '.'
766	&& pszName[1] == '.'
767	&& (pszName[2] == '\0' \|\| RTPATH_IS_SLASH(pszName[2])) )
768	return true;
769	while (pszName && !RTPATH_IS_SEP(pszName))
770	pszName++;
771	}
772
773	return false;
774	}
775
776
777	#if !defined(RT_OS_WINDOWS) && !defined(RT_OS_OS2)
778
779	/**
780	* Queries the user ID to use when extracting a member.
781	*
782	* @returns rcExit or RTEXITCODE_FAILURE.
783	* @param pOpts The tar options.
784	* @param pUser The user info.
785	* @param pszName The file name to use when complaining.
786	* @param rcExit The current exit code.
787	* @param pUid Where to return the user ID.
788	*/
789	static RTEXITCODE rtZipTarQueryExtractOwner(PRTZIPTARCMDOPS pOpts, PCRTFSOBJINFO pOwner, const char *pszName, RTEXITCODE rcExit,
790	PRTUID pUid)
791	{
792	if (pOpts->uidOwner != NIL_RTUID)
793	*pUid = pOpts->uidOwner;
794	else if (pOpts->fPreserveGroup)
795	{
796	if (!pOwner->Attr.u.UnixGroup.szName[0])
797	*pUid = pOwner->Attr.u.UnixOwner.uid;
798	else
799	{
800	*pUid = NIL_RTUID;
801	return RTMsgErrorExitFailure("%s: User resolving is not implemented.", pszName);
802	}
803	}
804	else
805	*pUid = NIL_RTUID;
806	return rcExit;
807	}
808
809
810	/**
811	* Queries the group ID to use when extracting a member.
812	*
813	* @returns rcExit or RTEXITCODE_FAILURE.
814	* @param pOpts The tar options.
815	* @param pGroup The group info.
816	* @param pszName The file name to use when complaining.
817	* @param rcExit The current exit code.
818	* @param pGid Where to return the group ID.
819	*/
820	static RTEXITCODE rtZipTarQueryExtractGroup(PRTZIPTARCMDOPS pOpts, PCRTFSOBJINFO pGroup, const char *pszName, RTEXITCODE rcExit,
821	PRTGID pGid)
822	{
823	if (pOpts->gidGroup != NIL_RTGID)
824	*pGid = pOpts->gidGroup;
825	else if (pOpts->fPreserveGroup)
826	{
827	if (!pGroup->Attr.u.UnixGroup.szName[0])
828	*pGid = pGroup->Attr.u.UnixGroup.gid;
829	else
830	{
831	*pGid = NIL_RTGID;
832	return RTMsgErrorExitFailure("%s: Group resolving is not implemented.", pszName);
833	}
834	}
835	else
836	*pGid = NIL_RTGID;
837	return rcExit;
838	}
839
840	#endif /* !defined(RT_OS_WINDOWS) && !defined(RT_OS_OS2) */
841
842
843	/**
844	* Corrects the file mode and other attributes.
845	*
846	* Common worker for rtZipTarCmdExtractFile and rtZipTarCmdExtractHardlink.
847	*
848	* @returns rcExit or RTEXITCODE_FAILURE.
849	* @param pOpts The tar options.
850	* @param rcExit The current exit code.
851	* @param hFile The handle to the destination file.
852	* @param pszDst The destination path (for error reporting).
853	* @param pUnixInfo The unix fs object info.
854	* @param pOwner The owner info.
855	* @param pGroup The group info.
856	*/
857	static RTEXITCODE rtZipTarCmdExtractSetAttribs(PRTZIPTARCMDOPS pOpts, RTEXITCODE rcExit, RTFILE hFile, const char *pszDst,
858	PCRTFSOBJINFO pUnixInfo, PCRTFSOBJINFO pOwner, PCRTFSOBJINFO pGroup)
859	{
860	int rc;
861
862	if (!pOpts->fNoModTime)
863	{
864	rc = RTFileSetTimes(hFile, NULL, &pUnixInfo->ModificationTime, NULL, NULL);
865	if (RT_FAILURE(rc))
866	rcExit = RTMsgErrorExitFailure("%s: Error setting times: %Rrc", pszDst, rc);
867	}
868
869	#if !defined(RT_OS_WINDOWS) && !defined(RT_OS_OS2)
870	if ( pOpts->uidOwner != NIL_RTUID
871	\|\| pOpts->gidGroup != NIL_RTGID
872	\|\| pOpts->fPreserveOwner
873	\|\| pOpts->fPreserveGroup)
874	{
875	RTUID uidFile;
876	rcExit = rtZipTarQueryExtractOwner(pOpts, pOwner, pszDst, rcExit, &uidFile);
877
878	RTGID gidFile;
879	rcExit = rtZipTarQueryExtractGroup(pOpts, pGroup, pszDst, rcExit, &gidFile);
880	if (uidFile != NIL_RTUID \|\| gidFile != NIL_RTGID)
881	{
882	rc = RTFileSetOwner(hFile, uidFile, gidFile);
883	if (RT_FAILURE(rc))
884	rcExit = RTMsgErrorExitFailure("%s: Error owner/group: %Rrc", pszDst, rc);
885	}
886	}
887	#else
888	RT_NOREF_PV(pOwner); RT_NOREF_PV(pGroup);
889	#endif
890
891	RTFMODE fMode = (pUnixInfo->Attr.fMode & pOpts->fFileModeAndMask) \| pOpts->fFileModeOrMask;
892	rc = RTFileSetMode(hFile, fMode \| RTFS_TYPE_FILE);
893	if (RT_FAILURE(rc))
894	rcExit = RTMsgErrorExitFailure("%s: Error changing mode: %Rrc", pszDst, rc);
895
896	return rcExit;
897	}
898
899
900	/**
901	* Extracts a hard linked file.
902	*
903	* @returns rcExit or RTEXITCODE_FAILURE.
904	* @param pOpts The tar options.
905	* @param rcExit The current exit code.
906	* @param pszDst The destination path.
907	* @param pszTarget The target relative path.
908	* @param pUnixInfo The unix fs object info.
909	* @param pOwner The owner info.
910	* @param pGroup The group info.
911	*/
912	static RTEXITCODE rtZipTarCmdExtractHardlink(PRTZIPTARCMDOPS pOpts, RTEXITCODE rcExit, const char *pszDst,
913	const char *pszTarget, PCRTFSOBJINFO pUnixInfo, PCRTFSOBJINFO pOwner,
914	PCRTFSOBJINFO pGroup)
915	{
916	/*
917	* Construct full target path and check that it exists.
918	*/
919	char szFullTarget[RTPATH_MAX];
920	int rc = RTPathJoin(szFullTarget, sizeof(szFullTarget), pOpts->pszDirectory ? pOpts->pszDirectory : ".", pszTarget);
921	if (RT_FAILURE(rc))
922	return RTMsgErrorExitFailure("%s: Failed to construct full hardlink target path for %s: %Rrc",
923	pszDst, pszTarget, rc);
924
925	if (!RTFileExists(szFullTarget))
926	return RTMsgErrorExitFailure("%s: Hardlink target not found (or not a file): %s", pszDst, szFullTarget);
927
928	/*
929	* Try hardlink the file, falling back on copying.
930	*/
931	/** @todo actual hardlinking */
932	if (true)
933	{
934	RTMsgWarning("%s: Hardlinking not available, copying '%s' instead.", pszDst, szFullTarget);
935
936	RTFILE hSrcFile;
937	rc = RTFileOpen(&hSrcFile, szFullTarget, RTFILE_O_READ \| RTFILE_O_DENY_WRITE \| RTFILE_O_OPEN);
938	if (RT_SUCCESS(rc))
939	{
940	uint32_t fOpen = RTFILE_O_READWRITE \| RTFILE_O_DENY_WRITE \| RTFILE_O_CREATE_REPLACE \| RTFILE_O_ACCESS_ATTR_DEFAULT
941	\| ((RTFS_UNIX_IWUSR \| RTFS_UNIX_IRUSR) << RTFILE_O_CREATE_MODE_SHIFT);
942	RTFILE hDstFile;
943	rc = RTFileOpen(&hDstFile, pszDst, fOpen);
944	if (RT_SUCCESS(rc))
945	{
946	rc = RTFileCopyByHandles(hSrcFile, hDstFile);
947	if (RT_SUCCESS(rc))
948	{
949	rcExit = rtZipTarCmdExtractSetAttribs(pOpts, rcExit, hDstFile, pszDst, pUnixInfo, pOwner, pGroup);
950	rc = RTFileClose(hDstFile);
951	if (RT_FAILURE(rc))
952	{
953	rcExit = RTMsgErrorExitFailure("%s: Error closing hardlinked file copy: %Rrc", pszDst, rc);
954	RTFileDelete(pszDst);
955	}
956	}
957	else
958	{
959	rcExit = RTMsgErrorExitFailure("%s: Failed copying hardlinked file '%s': %Rrc", pszDst, szFullTarget, rc);
960	rc = RTFileClose(hDstFile);
961	RTFileDelete(pszDst);
962	}
963	}
964	else
965	rcExit = RTMsgErrorExitFailure("%s: Error creating file: %Rrc", pszDst, rc);
966	RTFileClose(hSrcFile);
967	}
968	else
969	rcExit = RTMsgErrorExitFailure("%s: Error opening file '%s' for reading (hardlink target): %Rrc",
970	pszDst, szFullTarget, rc);
971	}
972
973	return rcExit;
974	}
975
976
977
978	/**
979	* Extracts a file.
980	*
981	* Since we can restore permissions and attributes more efficiently by working
982	* directly on the file handle, we have special code path for files.
983	*
984	* @returns rcExit or RTEXITCODE_FAILURE.
985	* @param pOpts The tar options.
986	* @param hVfsObj The tar object to display
987	* @param rcExit The current exit code.
988	* @param pszDst The destination path.
989	* @param pUnixInfo The unix fs object info.
990	* @param pOwner The owner info.
991	* @param pGroup The group info.
992	*/
993	static RTEXITCODE rtZipTarCmdExtractFile(PRTZIPTARCMDOPS pOpts, RTVFSOBJ hVfsObj, RTEXITCODE rcExit,
994	const char *pszDst, PCRTFSOBJINFO pUnixInfo, PCRTFSOBJINFO pOwner, PCRTFSOBJINFO pGroup)
995	{
996	/*
997	* Open the destination file and create a stream object for it.
998	*/
999	uint32_t fOpen = RTFILE_O_READWRITE \| RTFILE_O_DENY_WRITE \| RTFILE_O_CREATE_REPLACE \| RTFILE_O_ACCESS_ATTR_DEFAULT
1000	\| ((RTFS_UNIX_IWUSR \| RTFS_UNIX_IRUSR) << RTFILE_O_CREATE_MODE_SHIFT);
1001	RTFILE hFile;
1002	int rc = RTFileOpen(&hFile, pszDst, fOpen);
1003	if (RT_FAILURE(rc))
1004	return RTMsgErrorExitFailure("%s: Error creating file: %Rrc", pszDst, rc);
1005
1006	RTVFSIOSTREAM hVfsIosDst;
1007	rc = RTVfsIoStrmFromRTFile(hFile, fOpen, true /fLeaveOpen/, &hVfsIosDst);
1008	if (RT_SUCCESS(rc))
1009	{
1010	/*
1011	* Convert source to a stream and optionally add a read ahead stage.
1012	*/
1013	RTVFSIOSTREAM hVfsIosSrc = RTVfsObjToIoStream(hVfsObj);
1014	if (pOpts->fReadAhead)
1015	{
1016	RTVFSIOSTREAM hVfsReadAhead;
1017	rc = RTVfsCreateReadAheadForIoStream(hVfsIosSrc, 0 /fFlag/, 16 /cBuffers/, _256K /cbBuffer/, &hVfsReadAhead);
1018	if (RT_SUCCESS(rc))
1019	{
1020	RTVfsIoStrmRelease(hVfsIosSrc);
1021	hVfsIosSrc = hVfsReadAhead;
1022	}
1023	else
1024	AssertRC(rc); /* can be ignored in release builds. */
1025	}
1026
1027	/*
1028	* Pump the data thru and correct the file attributes.
1029	*/
1030	rc = RTVfsUtilPumpIoStreams(hVfsIosSrc, hVfsIosDst, (uint32_t)RT_MIN(pUnixInfo->cbObject, _1M));
1031	if (RT_SUCCESS(rc))
1032	rcExit = rtZipTarCmdExtractSetAttribs(pOpts, rcExit, hFile, pszDst, pUnixInfo, pOwner, pGroup);
1033	else
1034	rcExit = RTMsgErrorExitFailure("%s: Error writing out file: %Rrc", pszDst, rc);
1035	RTVfsIoStrmRelease(hVfsIosSrc);
1036	RTVfsIoStrmRelease(hVfsIosDst);
1037	}
1038	else
1039	rcExit = RTMsgErrorExitFailure("%s: Error creating I/O stream for file: %Rrc", pszDst, rc);
1040	RTFileClose(hFile);
1041	return rcExit;
1042	}
1043
1044
1045	/**
1046	* @callback_method_impl{PFNDOWITHMEMBER, Implements --extract.}
1047	*/
1048	static RTEXITCODE rtZipTarCmdExtractCallback(PRTZIPTARCMDOPS pOpts, RTVFSOBJ hVfsObj, const char *pszName, RTEXITCODE rcExit)
1049	{
1050	if (pOpts->fVerbose)
1051	RTPrintf("%s\n", pszName);
1052
1053	/*
1054	* Query all the information.
1055	*/
1056	RTFSOBJINFO UnixInfo;
1057	int rc = RTVfsObjQueryInfo(hVfsObj, &UnixInfo, RTFSOBJATTRADD_UNIX);
1058	if (RT_FAILURE(rc))
1059	return RTMsgErrorExitFailure("RTVfsObjQueryInfo returned %Rrc on '%s'", rc, pszName);
1060
1061	RTFSOBJINFO Owner;
1062	rc = RTVfsObjQueryInfo(hVfsObj, &Owner, RTFSOBJATTRADD_UNIX_OWNER);
1063	if (RT_FAILURE(rc))
1064	return RTMsgErrorExit(RTEXITCODE_FAILURE,
1065	"RTVfsObjQueryInfo(,,UNIX_OWNER) returned %Rrc on '%s'",
1066	rc, pszName);
1067
1068	RTFSOBJINFO Group;
1069	rc = RTVfsObjQueryInfo(hVfsObj, &Group, RTFSOBJATTRADD_UNIX_GROUP);
1070	if (RT_FAILURE(rc))
1071	return RTMsgErrorExit(RTEXITCODE_FAILURE,
1072	"RTVfsObjQueryInfo(,,UNIX_OWNER) returned %Rrc on '%s'",
1073	rc, pszName);
1074
1075	bool fIsHardLink = false;
1076	char szTarget[RTPATH_MAX];
1077	szTarget[0] = '\0';
1078	RTVFSSYMLINK hVfsSymlink = RTVfsObjToSymlink(hVfsObj);
1079	if (hVfsSymlink != NIL_RTVFSSYMLINK)
1080	{
1081	rc = RTVfsSymlinkRead(hVfsSymlink, szTarget, sizeof(szTarget));
1082	RTVfsSymlinkRelease(hVfsSymlink);
1083	if (RT_FAILURE(rc))
1084	return RTMsgErrorExitFailure("%s: RTVfsSymlinkRead failed: %Rrc", pszName, rc);
1085	if (!szTarget[0])
1086	return RTMsgErrorExitFailure("%s: Link target is empty.", pszName);
1087	if (!RTFS_IS_SYMLINK(UnixInfo.Attr.fMode))
1088	{
1089	fIsHardLink = true;
1090	if (!RTFS_IS_FILE(UnixInfo.Attr.fMode))
1091	return RTMsgErrorExitFailure("%s: Hardlinks are only supported for regular files (target=%s).",
1092	pszName, szTarget);
1093	if (rtZipTarHasEscapeSequence(pszName))
1094	return RTMsgErrorExitFailure("%s: Hardlink target '%s' contains an escape sequence.",
1095	pszName, szTarget);
1096	}
1097	}
1098	else if (RTFS_IS_SYMLINK(UnixInfo.Attr.fMode))
1099	return RTMsgErrorExitFailure("Failed to get symlink object for '%s'", pszName);
1100
1101	if (rtZipTarHasEscapeSequence(pszName))
1102	return RTMsgErrorExitFailure("Name '%s' contains an escape sequence.", pszName);
1103
1104	/*
1105	* Construct the path to the extracted member.
1106	*/
1107	char szDst[RTPATH_MAX];
1108	rc = RTPathJoin(szDst, sizeof(szDst), pOpts->pszDirectory ? pOpts->pszDirectory : ".", pszName);
1109	if (RT_FAILURE(rc))
1110	return RTMsgErrorExitFailure("%s: Failed to construct destination path for: %Rrc", pszName, rc);
1111
1112	/*
1113	* Extract according to the type.
1114	*/
1115	if (!fIsHardLink)
1116	switch (UnixInfo.Attr.fMode & RTFS_TYPE_MASK)
1117	{
1118	case RTFS_TYPE_FILE:
1119	return rtZipTarCmdExtractFile(pOpts, hVfsObj, rcExit, szDst, &UnixInfo, &Owner, &Group);
1120
1121	case RTFS_TYPE_DIRECTORY:
1122	rc = RTDirCreateFullPath(szDst, UnixInfo.Attr.fMode & RTFS_UNIX_ALL_ACCESS_PERMS);
1123	if (RT_FAILURE(rc))
1124	return RTMsgErrorExitFailure("%s: Error creating directory: %Rrc", szDst, rc);
1125	break;
1126
1127	case RTFS_TYPE_SYMLINK:
1128	rc = RTSymlinkCreate(szDst, szTarget, RTSYMLINKTYPE_UNKNOWN, 0);
1129	if (RT_FAILURE(rc))
1130	return RTMsgErrorExitFailure("%s: Error creating symbolic link: %Rrc", szDst, rc);
1131	break;
1132
1133	case RTFS_TYPE_FIFO:
1134	return RTMsgErrorExitFailure("%s: FIFOs are not supported.", pszName);
1135	case RTFS_TYPE_DEV_CHAR:
1136	return RTMsgErrorExitFailure("%s: FIFOs are not supported.", pszName);
1137	case RTFS_TYPE_DEV_BLOCK:
1138	return RTMsgErrorExitFailure("%s: Block devices are not supported.", pszName);
1139	case RTFS_TYPE_SOCKET:
1140	return RTMsgErrorExitFailure("%s: Sockets are not supported.", pszName);
1141	case RTFS_TYPE_WHITEOUT:
1142	return RTMsgErrorExitFailure("%s: Whiteouts are not support.", pszName);
1143	default:
1144	return RTMsgErrorExitFailure("%s: Unknown file type.", pszName);
1145	}
1146	else
1147	return rtZipTarCmdExtractHardlink(pOpts, rcExit, szDst, szTarget, &UnixInfo, &Owner, &Group);
1148
1149	/*
1150	* Set other attributes as requested.
1151	*
1152	* Note! File extraction does get here.
1153	*/
1154	if (!pOpts->fNoModTime)
1155	{
1156	rc = RTPathSetTimesEx(szDst, NULL, &UnixInfo.ModificationTime, NULL, NULL, RTPATH_F_ON_LINK);
1157	if (RT_FAILURE(rc) && rc != VERR_NOT_SUPPORTED && rc != VERR_NS_SYMLINK_SET_TIME)
1158	rcExit = RTMsgErrorExitFailure("%s: Error changing modification time: %Rrc.", pszName, rc);
1159	}
1160
1161	#if !defined(RT_OS_WINDOWS) && !defined(RT_OS_OS2)
1162	if ( pOpts->uidOwner != NIL_RTUID
1163	\|\| pOpts->gidGroup != NIL_RTGID
1164	\|\| pOpts->fPreserveOwner
1165	\|\| pOpts->fPreserveGroup)
1166	{
1167	RTUID uidFile;
1168	rcExit = rtZipTarQueryExtractOwner(pOpts, &Owner, szDst, rcExit, &uidFile);
1169
1170	RTGID gidFile;
1171	rcExit = rtZipTarQueryExtractGroup(pOpts, &Group, szDst, rcExit, &gidFile);
1172	if (uidFile != NIL_RTUID \|\| gidFile != NIL_RTGID)
1173	{
1174	rc = RTPathSetOwnerEx(szDst, uidFile, gidFile, RTPATH_F_ON_LINK);
1175	if (RT_FAILURE(rc))
1176	rcExit = RTMsgErrorExitFailure("%s: Error owner/group: %Rrc", szDst, rc);
1177	}
1178	}
1179	#endif
1180
1181	#if !defined(RT_OS_WINDOWS) /** @todo implement RTPathSetMode on windows... */
1182	if (!RTFS_IS_SYMLINK(UnixInfo.Attr.fMode)) /* RTPathSetMode follows symbolic links atm. */
1183	{
1184	RTFMODE fMode;
1185	if (RTFS_IS_DIRECTORY(UnixInfo.Attr.fMode))
1186	fMode = (UnixInfo.Attr.fMode & (pOpts->fDirModeAndMask \| RTFS_TYPE_MASK)) \| pOpts->fDirModeOrMask;
1187	else
1188	fMode = (UnixInfo.Attr.fMode & (pOpts->fFileModeAndMask \| RTFS_TYPE_MASK)) \| pOpts->fFileModeOrMask;
1189	rc = RTPathSetMode(szDst, fMode);
1190	if (RT_FAILURE(rc))
1191	rcExit = RTMsgErrorExitFailure("%s: Error changing mode: %Rrc", szDst, rc);
1192	}
1193	#endif
1194
1195	return rcExit;
1196	}
1197
1198
1199	/**
1200	* @callback_method_impl{PFNDOWITHMEMBER, Implements --list.}
1201	*/
1202	static RTEXITCODE rtZipTarCmdListCallback(PRTZIPTARCMDOPS pOpts, RTVFSOBJ hVfsObj, const char *pszName, RTEXITCODE rcExit)
1203	{
1204	/*
1205	* This is very simple in non-verbose mode.
1206	*/
1207	if (!pOpts->fVerbose)
1208	{
1209	RTPrintf("%s\n", pszName);
1210	return rcExit;
1211	}
1212
1213	/*
1214	* Query all the information.
1215	*/
1216	RTFSOBJINFO UnixInfo;
1217	int rc = RTVfsObjQueryInfo(hVfsObj, &UnixInfo, RTFSOBJATTRADD_UNIX);
1218	if (RT_FAILURE(rc))
1219	{
1220	rcExit = RTMsgErrorExitFailure("RTVfsObjQueryInfo returned %Rrc on '%s'", rc, pszName);
1221	RT_ZERO(UnixInfo);
1222	}
1223
1224	RTFSOBJINFO Owner;
1225	rc = RTVfsObjQueryInfo(hVfsObj, &Owner, RTFSOBJATTRADD_UNIX_OWNER);
1226	if (RT_FAILURE(rc))
1227	{
1228	rcExit = RTMsgErrorExit(RTEXITCODE_FAILURE,
1229	"RTVfsObjQueryInfo(,,UNIX_OWNER) returned %Rrc on '%s'",
1230	rc, pszName);
1231	RT_ZERO(Owner);
1232	}
1233
1234	RTFSOBJINFO Group;
1235	rc = RTVfsObjQueryInfo(hVfsObj, &Group, RTFSOBJATTRADD_UNIX_GROUP);
1236	if (RT_FAILURE(rc))
1237	{
1238	rcExit = RTMsgErrorExit(RTEXITCODE_FAILURE,
1239	"RTVfsObjQueryInfo(,,UNIX_OWNER) returned %Rrc on '%s'",
1240	rc, pszName);
1241	RT_ZERO(Group);
1242	}
1243
1244	const char *pszLinkType = NULL;
1245	char szTarget[RTPATH_MAX];
1246	szTarget[0] = '\0';
1247	RTVFSSYMLINK hVfsSymlink = RTVfsObjToSymlink(hVfsObj);
1248	if (hVfsSymlink != NIL_RTVFSSYMLINK)
1249	{
1250	rc = RTVfsSymlinkRead(hVfsSymlink, szTarget, sizeof(szTarget));
1251	if (RT_FAILURE(rc))
1252	rcExit = RTMsgErrorExitFailure("RTVfsSymlinkRead returned %Rrc on '%s'", rc, pszName);
1253	RTVfsSymlinkRelease(hVfsSymlink);
1254	pszLinkType = RTFS_IS_SYMLINK(UnixInfo.Attr.fMode) ? "->" : "link to";
1255	}
1256	else if (RTFS_IS_SYMLINK(UnixInfo.Attr.fMode))
1257	rcExit = RTMsgErrorExitFailure("Failed to get symlink object for '%s'", pszName);
1258
1259	/*
1260	* Translate the mode mask.
1261	*/
1262	char szMode[16];
1263	switch (UnixInfo.Attr.fMode & RTFS_TYPE_MASK)
1264	{
1265	case RTFS_TYPE_FIFO: szMode[0] = 'f'; break;
1266	case RTFS_TYPE_DEV_CHAR: szMode[0] = 'c'; break;
1267	case RTFS_TYPE_DIRECTORY: szMode[0] = 'd'; break;
1268	case RTFS_TYPE_DEV_BLOCK: szMode[0] = 'b'; break;
1269	case RTFS_TYPE_FILE: szMode[0] = '-'; break;
1270	case RTFS_TYPE_SYMLINK: szMode[0] = 'l'; break;
1271	case RTFS_TYPE_SOCKET: szMode[0] = 's'; break;
1272	case RTFS_TYPE_WHITEOUT: szMode[0] = 'w'; break;
1273	default: szMode[0] = '?'; break;
1274	}
1275	if (pszLinkType && szMode[0] != 's')
1276	szMode[0] = 'h';
1277
1278	szMode[1] = UnixInfo.Attr.fMode & RTFS_UNIX_IRUSR ? 'r' : '-';
1279	szMode[2] = UnixInfo.Attr.fMode & RTFS_UNIX_IWUSR ? 'w' : '-';
1280	szMode[3] = UnixInfo.Attr.fMode & RTFS_UNIX_IXUSR ? 'x' : '-';
1281
1282	szMode[4] = UnixInfo.Attr.fMode & RTFS_UNIX_IRGRP ? 'r' : '-';
1283	szMode[5] = UnixInfo.Attr.fMode & RTFS_UNIX_IWGRP ? 'w' : '-';
1284	szMode[6] = UnixInfo.Attr.fMode & RTFS_UNIX_IXGRP ? 'x' : '-';
1285
1286	szMode[7] = UnixInfo.Attr.fMode & RTFS_UNIX_IROTH ? 'r' : '-';
1287	szMode[8] = UnixInfo.Attr.fMode & RTFS_UNIX_IWOTH ? 'w' : '-';
1288	szMode[9] = UnixInfo.Attr.fMode & RTFS_UNIX_IXOTH ? 'x' : '-';
1289	szMode[10] = '\0';
1290
1291	/** @todo sticky and set-uid/gid bits. */
1292
1293	/*
1294	* Make sure we've got valid owner and group strings.
1295	*/
1296	if (!Owner.Attr.u.UnixGroup.szName[0])
1297	RTStrPrintf(Owner.Attr.u.UnixOwner.szName, sizeof(Owner.Attr.u.UnixOwner.szName),
1298	"%u", UnixInfo.Attr.u.Unix.uid);
1299
1300	if (!Group.Attr.u.UnixOwner.szName[0])
1301	RTStrPrintf(Group.Attr.u.UnixGroup.szName, sizeof(Group.Attr.u.UnixGroup.szName),
1302	"%u", UnixInfo.Attr.u.Unix.gid);
1303
1304	/*
1305	* Format the modification time.
1306	*/
1307	char szModTime[32];
1308	RTTIME ModTime;
1309	PRTTIME pTime;
1310	if (!pOpts->fDisplayUtc)
1311	pTime = RTTimeLocalExplode(&ModTime, &UnixInfo.ModificationTime);
1312	else
1313	pTime = RTTimeExplode(&ModTime, &UnixInfo.ModificationTime);
1314	if (!pTime)
1315	RT_ZERO(ModTime);
1316	RTStrPrintf(szModTime, sizeof(szModTime), "%04d-%02u-%02u %02u:%02u",
1317	ModTime.i32Year, ModTime.u8Month, ModTime.u8MonthDay, ModTime.u8Hour, ModTime.u8Minute);
1318
1319	/*
1320	* Format the size and figure how much space is needed between the
1321	* user/group and the size.
1322	*/
1323	char szSize[64];
1324	size_t cchSize;
1325	switch (UnixInfo.Attr.fMode & RTFS_TYPE_MASK)
1326	{
1327	case RTFS_TYPE_DEV_CHAR:
1328	case RTFS_TYPE_DEV_BLOCK:
1329	cchSize = RTStrPrintf(szSize, sizeof(szSize), "%u,%u",
1330	RTDEV_MAJOR(UnixInfo.Attr.u.Unix.Device), RTDEV_MINOR(UnixInfo.Attr.u.Unix.Device));
1331	break;
1332	default:
1333	cchSize = RTStrPrintf(szSize, sizeof(szSize), "%RU64", UnixInfo.cbObject);
1334	break;
1335	}
1336
1337	size_t cchUserGroup = strlen(Owner.Attr.u.UnixOwner.szName)
1338	+ 1
1339	+ strlen(Group.Attr.u.UnixGroup.szName);
1340	ssize_t cchPad = cchUserGroup + cchSize + 1 < 19
1341	? 19 - (cchUserGroup + cchSize + 1)
1342	: 0;
1343
1344	/*
1345	* Go to press.
1346	*/
1347	if (pszLinkType)
1348	RTPrintf("%s %s/%s%*s %s %s %s %s %s\n",
1349	szMode,
1350	Owner.Attr.u.UnixOwner.szName, Group.Attr.u.UnixGroup.szName,
1351	cchPad, "",
1352	szSize,
1353	szModTime,
1354	pszName,
1355	pszLinkType,
1356	szTarget);
1357	else
1358	RTPrintf("%s %s/%s%*s %s %s %s\n",
1359	szMode,
1360	Owner.Attr.u.UnixOwner.szName, Group.Attr.u.UnixGroup.szName,
1361	cchPad, "",
1362	szSize,
1363	szModTime,
1364	pszName);
1365
1366	return rcExit;
1367	}
1368
1369
1370	/**
1371	* Display usage.
1372	*
1373	* @param pszProgName The program name.
1374	*/
1375	static void rtZipTarUsage(const char *pszProgName)
1376	{
1377	/*
1378	* 0 1 2 3 4 5 6 7 8
1379	* 012345678901234567890123456789012345678901234567890123456789012345678901234567890
1380	*/
1381	RTPrintf("Usage: %s [options]\n"
1382	"\n",
1383	pszProgName);
1384	RTPrintf("Operations:\n"
1385	" -A, --concatenate, --catenate\n"
1386	" Append the content of one tar archive to another. (not impl)\n"
1387	" -c, --create\n"
1388	" Create a new tar archive. (not impl)\n"
1389	" -d, --diff, --compare\n"
1390	" Compare atar archive with the file system. (not impl)\n"
1391	" -r, --append\n"
1392	" Append more files to the tar archive. (not impl)\n"
1393	" -t, --list\n"
1394	" List the contents of the tar archive.\n"
1395	" -u, --update\n"
1396	" Update the archive, adding files that are newer than the\n"
1397	" ones in the archive. (not impl)\n"
1398	" -x, --extract, --get\n"
1399	" Extract the files from the tar archive.\n"
1400	" --delete\n"
1401	" Delete files from the tar archive.\n"
1402	"\n"
1403	);
1404	RTPrintf("Basic Options:\n"
1405	" -C <dir>, --directory <dir> (-A, -c, -d, -r, -u, -x)\n"
1406	" Sets the base directory for input and output file members.\n"
1407	" This does not apply to --file, even if it preceeds it.\n"
1408	" -f <archive>, --file <archive> (all)\n"
1409	" The tar file to create or process. '-' indicates stdout/stdin,\n"
1410	" which is is the default.\n"
1411	" -v, --verbose (all)\n"
1412	" Verbose operation.\n"
1413	" -p, --preserve-permissions (-x)\n"
1414	" Preserve all permissions when extracting. Must be used\n"
1415	" before the mode mask options as it will change some of these.\n"
1416	" -j, --bzip2 (all)\n"
1417	" Compress/decompress the archive with bzip2.\n"
1418	" -z, --gzip, --gunzip, --ungzip (all)\n"
1419	" Compress/decompress the archive with gzip.\n"
1420	"\n");
1421	RTPrintf("Misc Options:\n"
1422	" --owner <uid/username> (-A, -c, -d, -r, -u, -x)\n"
1423	" Set the owner of extracted and archived files to the user specified.\n"
1424	" --group <uid/username> (-A, -c, -d, -r, -u, -x)\n"
1425	" Set the group of extracted and archived files to the group specified.\n"
1426	" --utc (-t)\n"
1427	" Display timestamps as UTC instead of local time.\n"
1428	" -S, --sparse (-A, -c, -u)\n"
1429	" Detect sparse files and store them (gnu tar extension).\n"
1430	" --format <format> (-A, -c, -u, but also -d, -r, -x)\n"
1431	" The file format:\n"
1432	" auto (gnu tar)\n"
1433	" default (gnu tar)\n"
1434	" tar (gnu tar)"
1435	" gnu (tar v1.13+), "
1436	" ustar (tar POSIX.1-1988), "
1437	" pax (tar POSIX.1-2001),\n"
1438	" xar\n"
1439	" Note! Because XAR/TAR detection isn't implemented yet, it\n"
1440	" is necessary to specifcy --format=xar when reading a\n"
1441	" XAR file. Otherwise this option is only for creation.\n"
1442	"\n");
1443	RTPrintf("IPRT Options:\n"
1444	" --prefix <dir-prefix> (-A, -c, -d, -r, -u)\n"
1445	" Directory prefix to give the members added to the archive.\n"
1446	" --file-mode-and-mask <octal-mode> (-A, -c, -d, -r, -u, -x)\n"
1447	" Restrict the access mode of regular and special files.\n"
1448	" --file-mode-or-mask <octal-mode> (-A, -c, -d, -r, -u, -x)\n"
1449	" Include the given access mode for regular and special files.\n"
1450	" --dir-mode-and-mask <octal-mode> (-A, -c, -d, -r, -u, -x)\n"
1451	" Restrict the access mode of directories.\n"
1452	" --dir-mode-or-mask <octal-mode> (-A, -c, -d, -r, -u, -x)\n"
1453	" Include the given access mode for directories.\n"
1454	" --read-ahead (-x)\n"
1455	" Enabled read ahead thread when extracting files.\n"
1456	" --push-file (-A, -c, -u)\n"
1457	" Use RTVfsFsStrmPushFile instead of RTVfsFsStrmAdd.\n"
1458	"\n");
1459	RTPrintf("Standard Options:\n"
1460	" -h, -?, --help\n"
1461	" Display this help text.\n"
1462	" -V, --version\n"
1463	" Display version number.\n");
1464	}
1465
1466
1467	RTDECL(RTEXITCODE) RTZipTarCmd(unsigned cArgs, char **papszArgs)
1468	{
1469	/*
1470	* Parse the command line.
1471	*
1472	* N.B. This is less flexible that your regular tar program in that it
1473	* requires the operation to be specified as an option. On the other
1474	* hand, you can specify it where ever you like in the command line.
1475	*/
1476	static const RTGETOPTDEF s_aOptions[] =
1477	{
1478	/* operations */
1479	{ "--concatenate", 'A', RTGETOPT_REQ_NOTHING },
1480	{ "--catenate", 'A', RTGETOPT_REQ_NOTHING },
1481	{ "--create", 'c', RTGETOPT_REQ_NOTHING },
1482	{ "--diff", 'd', RTGETOPT_REQ_NOTHING },
1483	{ "--compare", 'd', RTGETOPT_REQ_NOTHING },
1484	{ "--append", 'r', RTGETOPT_REQ_NOTHING },
1485	{ "--list", 't', RTGETOPT_REQ_NOTHING },
1486	{ "--update", 'u', RTGETOPT_REQ_NOTHING },
1487	{ "--extract", 'x', RTGETOPT_REQ_NOTHING },
1488	{ "--get", 'x', RTGETOPT_REQ_NOTHING },
1489	{ "--delete", RTZIPTARCMD_OPT_DELETE, RTGETOPT_REQ_NOTHING },
1490
1491	/* basic options */
1492	{ "--directory", 'C', RTGETOPT_REQ_STRING },
1493	{ "--file", 'f', RTGETOPT_REQ_STRING },
1494	{ "--verbose", 'v', RTGETOPT_REQ_NOTHING },
1495	{ "--preserve-permissions", 'p', RTGETOPT_REQ_NOTHING },
1496	{ "--bzip2", 'j', RTGETOPT_REQ_NOTHING },
1497	{ "--gzip", 'z', RTGETOPT_REQ_NOTHING },
1498	{ "--gunzip", 'z', RTGETOPT_REQ_NOTHING },
1499	{ "--ungzip", 'z', RTGETOPT_REQ_NOTHING },
1500
1501	/* other options. */
1502	{ "--owner", RTZIPTARCMD_OPT_OWNER, RTGETOPT_REQ_STRING },
1503	{ "--group", RTZIPTARCMD_OPT_GROUP, RTGETOPT_REQ_STRING },
1504	{ "--utc", RTZIPTARCMD_OPT_UTC, RTGETOPT_REQ_NOTHING },
1505	{ "--sparse", 'S', RTGETOPT_REQ_NOTHING },
1506	{ "--format", RTZIPTARCMD_OPT_FORMAT, RTGETOPT_REQ_STRING },
1507
1508	/* IPRT extensions */
1509	{ "--prefix", RTZIPTARCMD_OPT_PREFIX, RTGETOPT_REQ_STRING },
1510	{ "--file-mode-and-mask", RTZIPTARCMD_OPT_FILE_MODE_AND_MASK, RTGETOPT_REQ_UINT32 \| RTGETOPT_FLAG_OCT },
1511	{ "--file-mode-or-mask", RTZIPTARCMD_OPT_FILE_MODE_OR_MASK, RTGETOPT_REQ_UINT32 \| RTGETOPT_FLAG_OCT },
1512	{ "--dir-mode-and-mask", RTZIPTARCMD_OPT_DIR_MODE_AND_MASK, RTGETOPT_REQ_UINT32 \| RTGETOPT_FLAG_OCT },
1513	{ "--dir-mode-or-mask", RTZIPTARCMD_OPT_DIR_MODE_OR_MASK, RTGETOPT_REQ_UINT32 \| RTGETOPT_FLAG_OCT },
1514	{ "--read-ahead", RTZIPTARCMD_OPT_READ_AHEAD, RTGETOPT_REQ_NOTHING },
1515	{ "--use-push-file", RTZIPTARCMD_OPT_USE_PUSH_FILE, RTGETOPT_REQ_NOTHING },
1516	};
1517
1518	RTGETOPTSTATE GetState;
1519	int rc = RTGetOptInit(&GetState, cArgs, papszArgs, s_aOptions, RT_ELEMENTS(s_aOptions), 1,
1520	RTGETOPTINIT_FLAGS_OPTS_FIRST);
1521	if (RT_FAILURE(rc))
1522	return RTMsgErrorExitFailure("RTGetOpt failed: %Rrc", rc);
1523
1524	RTZIPTARCMDOPS Opts;
1525	RT_ZERO(Opts);
1526	Opts.enmFormat = RTZIPTARCMDFORMAT_AUTO_DEFAULT;
1527	Opts.uidOwner = NIL_RTUID;
1528	Opts.gidGroup = NIL_RTUID;
1529	Opts.fFileModeAndMask = RTFS_UNIX_ALL_ACCESS_PERMS;
1530	Opts.fDirModeAndMask = RTFS_UNIX_ALL_ACCESS_PERMS;
1531	#if 0
1532	if (RTPermIsSuperUser())
1533	{
1534	Opts.fFileModeAndMask = RTFS_UNIX_ALL_PERMS;
1535	Opts.fDirModeAndMask = RTFS_UNIX_ALL_PERMS;
1536	Opts.fPreserveOwner = true;
1537	Opts.fPreserveGroup = true;
1538	}
1539	#endif
1540	Opts.enmTarFormat = RTZIPTARFORMAT_DEFAULT;
1541
1542	RTGETOPTUNION ValueUnion;
1543	while ( (rc = RTGetOpt(&GetState, &ValueUnion)) != 0
1544	&& rc != VINF_GETOPT_NOT_OPTION)
1545	{
1546	switch (rc)
1547	{
1548	/* operations */
1549	case 'A':
1550	case 'c':
1551	case 'd':
1552	case 'r':
1553	case 't':
1554	case 'u':
1555	case 'x':
1556	case RTZIPTARCMD_OPT_DELETE:
1557	if (Opts.iOperation)
1558	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "Conflicting tar operation (%s already set, now %s)",
1559	Opts.pszOperation, ValueUnion.pDef->pszLong);
1560	Opts.iOperation = rc;
1561	Opts.pszOperation = ValueUnion.pDef->pszLong;
1562	break;
1563
1564	/* basic options */
1565	case 'C':
1566	if (Opts.pszDirectory)
1567	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "You may only specify -C/--directory once");
1568	Opts.pszDirectory = ValueUnion.psz;
1569	break;
1570
1571	case 'f':
1572	if (Opts.pszFile)
1573	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "You may only specify -f/--file once");
1574	Opts.pszFile = ValueUnion.psz;
1575	break;
1576
1577	case 'v':
1578	Opts.fVerbose = true;
1579	break;
1580
1581	case 'p':
1582	Opts.fFileModeAndMask = RTFS_UNIX_ALL_PERMS;
1583	Opts.fDirModeAndMask = RTFS_UNIX_ALL_PERMS;
1584	Opts.fPreserveOwner = true;
1585	Opts.fPreserveGroup = true;
1586	break;
1587
1588	case 'j':
1589	case 'z':
1590	if (Opts.chZipper)
1591	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "You may only specify one compressor / decompressor");
1592	Opts.chZipper = rc;
1593	break;
1594
1595	case RTZIPTARCMD_OPT_OWNER:
1596	if (Opts.pszOwner)
1597	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "You may only specify --owner once");
1598	Opts.pszOwner = ValueUnion.psz;
1599
1600	rc = RTStrToUInt32Full(Opts.pszOwner, 0, &ValueUnion.u32);
1601	if (RT_SUCCESS(rc) && rc != VINF_SUCCESS)
1602	return RTMsgErrorExit(RTEXITCODE_SYNTAX,
1603	"Error convering --owner '%s' into a number: %Rrc", Opts.pszOwner, rc);
1604	if (RT_SUCCESS(rc))
1605	{
1606	Opts.uidOwner = ValueUnion.u32;
1607	Opts.pszOwner = NULL;
1608	}
1609	break;
1610
1611	case RTZIPTARCMD_OPT_GROUP:
1612	if (Opts.pszGroup)
1613	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "You may only specify --group once");
1614	Opts.pszGroup = ValueUnion.psz;
1615
1616	rc = RTStrToUInt32Full(Opts.pszGroup, 0, &ValueUnion.u32);
1617	if (RT_SUCCESS(rc) && rc != VINF_SUCCESS)
1618	return RTMsgErrorExit(RTEXITCODE_SYNTAX,
1619	"Error convering --group '%s' into a number: %Rrc", Opts.pszGroup, rc);
1620	if (RT_SUCCESS(rc))
1621	{
1622	Opts.gidGroup = ValueUnion.u32;
1623	Opts.pszGroup = NULL;
1624	}
1625	break;
1626
1627	case RTZIPTARCMD_OPT_UTC:
1628	Opts.fDisplayUtc = true;
1629	break;
1630
1631	/* GNU */
1632	case 'S':
1633	Opts.fTarCreate \|= RTZIPTAR_C_SPARSE;
1634	break;
1635
1636	/* iprt extensions */
1637	case RTZIPTARCMD_OPT_PREFIX:
1638	if (Opts.pszPrefix)
1639	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "You may only specify --prefix once");
1640	Opts.pszPrefix = ValueUnion.psz;
1641	break;
1642
1643	case RTZIPTARCMD_OPT_FILE_MODE_AND_MASK:
1644	Opts.fFileModeAndMask = ValueUnion.u32 & RTFS_UNIX_ALL_PERMS;
1645	break;
1646
1647	case RTZIPTARCMD_OPT_FILE_MODE_OR_MASK:
1648	Opts.fFileModeOrMask = ValueUnion.u32 & RTFS_UNIX_ALL_PERMS;
1649	break;
1650
1651	case RTZIPTARCMD_OPT_DIR_MODE_AND_MASK:
1652	Opts.fDirModeAndMask = ValueUnion.u32 & RTFS_UNIX_ALL_PERMS;
1653	break;
1654
1655	case RTZIPTARCMD_OPT_DIR_MODE_OR_MASK:
1656	Opts.fDirModeOrMask = ValueUnion.u32 & RTFS_UNIX_ALL_PERMS;
1657	break;
1658
1659	case RTZIPTARCMD_OPT_FORMAT:
1660	if (!strcmp(ValueUnion.psz, "auto") \|\| !strcmp(ValueUnion.psz, "default"))
1661	{
1662	Opts.enmFormat = RTZIPTARCMDFORMAT_AUTO_DEFAULT;
1663	Opts.enmTarFormat = RTZIPTARFORMAT_DEFAULT;
1664	}
1665	else if (!strcmp(ValueUnion.psz, "tar"))
1666	{
1667	Opts.enmFormat = RTZIPTARCMDFORMAT_TAR;
1668	Opts.enmTarFormat = RTZIPTARFORMAT_DEFAULT;
1669	}
1670	else if (!strcmp(ValueUnion.psz, "gnu"))
1671	{
1672	Opts.enmFormat = RTZIPTARCMDFORMAT_TAR;
1673	Opts.enmTarFormat = RTZIPTARFORMAT_GNU;
1674	}
1675	else if (!strcmp(ValueUnion.psz, "ustar"))
1676	{
1677	Opts.enmFormat = RTZIPTARCMDFORMAT_TAR;
1678	Opts.enmTarFormat = RTZIPTARFORMAT_USTAR;
1679	}
1680	else if ( !strcmp(ValueUnion.psz, "posix")
1681	\|\| !strcmp(ValueUnion.psz, "pax"))
1682	{
1683	Opts.enmFormat = RTZIPTARCMDFORMAT_TAR;
1684	Opts.enmTarFormat = RTZIPTARFORMAT_PAX;
1685	}
1686	else if (!strcmp(ValueUnion.psz, "xar"))
1687	Opts.enmFormat = RTZIPTARCMDFORMAT_XAR;
1688	else
1689	return RTMsgErrorExit(RTEXITCODE_SYNTAX, "Unknown archive format: '%s'", ValueUnion.psz);
1690	break;
1691
1692	case RTZIPTARCMD_OPT_READ_AHEAD:
1693	Opts.fReadAhead = true;
1694	break;
1695
1696	case RTZIPTARCMD_OPT_USE_PUSH_FILE:
1697	Opts.fUsePushFile = true;
1698	break;
1699
1700	/* Standard bits. */
1701	case 'h':
1702	rtZipTarUsage(RTPathFilename(papszArgs[0]));
1703	return RTEXITCODE_SUCCESS;
1704
1705	case 'V':
1706	RTPrintf("%sr%d\n", RTBldCfgVersion(), RTBldCfgRevision());
1707	return RTEXITCODE_SUCCESS;
1708
1709	default:
1710	return RTGetOptPrintError(rc, &ValueUnion);
1711	}
1712	}
1713
1714	if (rc == VINF_GETOPT_NOT_OPTION)
1715	{
1716	/* this is kind of ugly. */
1717	Assert((unsigned)GetState.iNext - 1 <= cArgs);
1718	Opts.papszFiles = (const char * const *)&papszArgs[GetState.iNext - 1];
1719	Opts.cFiles = cArgs - GetState.iNext + 1;
1720	}
1721
1722	/*
1723	* Post proceess the options.
1724	*/
1725	if (Opts.iOperation == 0)
1726	{
1727	Opts.iOperation = 't';
1728	Opts.pszOperation = "--list";
1729	}
1730
1731	if ( Opts.iOperation == 'x'
1732	&& Opts.pszOwner)
1733	return RTMsgErrorExitFailure("The use of --owner with %s has not implemented yet", Opts.pszOperation);
1734
1735	if ( Opts.iOperation == 'x'
1736	&& Opts.pszGroup)
1737	return RTMsgErrorExitFailure("The use of --group with %s has not implemented yet", Opts.pszOperation);
1738
1739	/*
1740	* Do the job.
1741	*/
1742	switch (Opts.iOperation)
1743	{
1744	case 't':
1745	return rtZipTarDoWithMembers(&Opts, rtZipTarCmdListCallback);
1746
1747	case 'x':
1748	return rtZipTarDoWithMembers(&Opts, rtZipTarCmdExtractCallback);
1749
1750	case 'c':
1751	return rtZipTarCreate(&Opts);
1752
1753	case 'A':
1754	case 'd':
1755	case 'r':
1756	case 'u':
1757	case RTZIPTARCMD_OPT_DELETE:
1758	return RTMsgErrorExitFailure("The operation %s is not implemented yet", Opts.pszOperation);
1759
1760	default:
1761	return RTMsgErrorExitFailure("Internal error");
1762	}
1763	}
1764

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/Runtime/common/zip/tarcmd.cpp@ 73041

Download in other formats: