/* $Id: fileio.cpp 44528 2013-02-04 14:27:54Z vboxsync $ */ /** @file * IPRT - File I/O. */ /* * Copyright (C) 2006-2011 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ /******************************************************************************* * Header Files * *******************************************************************************/ #include #include #include #include #include #include "internal/file.h" /******************************************************************************* * Global Variables * *******************************************************************************/ /** Set of forced set open flags for files opened read-only. */ static unsigned g_fOpenReadSet = 0; /** Set of forced cleared open flags for files opened read-only. */ static unsigned g_fOpenReadMask = 0; /** Set of forced set open flags for files opened write-only. */ static unsigned g_fOpenWriteSet = 0; /** Set of forced cleared open flags for files opened write-only. */ static unsigned g_fOpenWriteMask = 0; /** Set of forced set open flags for files opened read-write. */ static unsigned g_fOpenReadWriteSet = 0; /** Set of forced cleared open flags for files opened read-write. */ static unsigned g_fOpenReadWriteMask = 0; /** * Force the use of open flags for all files opened after the setting is * changed. The caller is responsible for not causing races with RTFileOpen(). * * @returns iprt status code. * @param fOpenForAccess Access mode to which the set/mask settings apply. * @param fSet Open flags to be forced set. * @param fMask Open flags to be masked out. */ RTR3DECL(int) RTFileSetForceFlags(unsigned fOpenForAccess, unsigned fSet, unsigned fMask) { /* * For now allow only RTFILE_O_WRITE_THROUGH. The other flags either * make no sense in this context or are not useful to apply to all files. */ if ((fSet | fMask) & ~RTFILE_O_WRITE_THROUGH) return VERR_INVALID_PARAMETER; switch (fOpenForAccess) { case RTFILE_O_READ: g_fOpenReadSet = fSet; g_fOpenReadMask = fMask; break; case RTFILE_O_WRITE: g_fOpenWriteSet = fSet; g_fOpenWriteMask = fMask; break; case RTFILE_O_READWRITE: g_fOpenReadWriteSet = fSet; g_fOpenReadWriteMask = fMask; break; default: AssertMsgFailed(("Invalid access mode %d\n", fOpenForAccess)); return VERR_INVALID_PARAMETER; } return VINF_SUCCESS; } /** * Adjusts and validates the flags. * * The adjustments are made according to the wishes specified using the RTFileSetForceFlags API. * * @returns IPRT status code. * @param pfOpen Pointer to the user specified flags on input. * Updated on successful return. * @internal */ int rtFileRecalcAndValidateFlags(uint64_t *pfOpen) { /* * Recalc. */ uint32_t fOpen = *pfOpen; switch (fOpen & RTFILE_O_ACCESS_MASK) { case RTFILE_O_READ: fOpen |= g_fOpenReadSet; fOpen &= ~g_fOpenReadMask; break; case RTFILE_O_WRITE: fOpen |= g_fOpenWriteSet; fOpen &= ~g_fOpenWriteMask; break; case RTFILE_O_READWRITE: fOpen |= g_fOpenReadWriteSet; fOpen &= ~g_fOpenReadWriteMask; break; default: AssertMsgFailed(("Invalid RW value, fOpen=%#llx\n", fOpen)); return VERR_INVALID_PARAMETER; } /* * Validate . */ AssertMsgReturn(fOpen & RTFILE_O_ACCESS_MASK, ("Missing RTFILE_O_READ/WRITE: fOpen=%#llx\n", fOpen), VERR_INVALID_PARAMETER); #if defined(RT_OS_WINDOWS) || defined(RT_OS_OS2) AssertMsgReturn(!(fOpen & (~(uint64_t)RTFILE_O_VALID_MASK | RTFILE_O_NON_BLOCK)), ("%#llx\n", fOpen), VERR_INVALID_PARAMETER); #else AssertMsgReturn(!(fOpen & ~(uint64_t)RTFILE_O_VALID_MASK), ("%#llx\n", fOpen), VERR_INVALID_PARAMETER); #endif AssertMsgReturn((fOpen & (RTFILE_O_TRUNCATE | RTFILE_O_WRITE)) != RTFILE_O_TRUNCATE, ("%#llx\n", fOpen), VERR_INVALID_PARAMETER); switch (fOpen & RTFILE_O_ACTION_MASK) { case 0: /* temporarily */ AssertMsgFailed(("Missing RTFILE_O_OPEN/CREATE*! (continuable assertion)\n")); fOpen |= RTFILE_O_OPEN; break; case RTFILE_O_OPEN: AssertMsgReturn(!(RTFILE_O_NOT_CONTENT_INDEXED & fOpen), ("%#llx\n", fOpen), VERR_INVALID_PARAMETER); case RTFILE_O_OPEN_CREATE: case RTFILE_O_CREATE: case RTFILE_O_CREATE_REPLACE: break; default: AssertMsgFailed(("Invalid action value: fOpen=%#llx\n", fOpen)); return VERR_INVALID_PARAMETER; } switch (fOpen & RTFILE_O_DENY_MASK) { case 0: /* temporarily */ AssertMsgFailed(("Missing RTFILE_O_DENY_*! (continuable assertion)\n")); fOpen |= RTFILE_O_DENY_NONE; break; case RTFILE_O_DENY_NONE: case RTFILE_O_DENY_READ: case RTFILE_O_DENY_WRITE: case RTFILE_O_DENY_WRITE | RTFILE_O_DENY_READ: case RTFILE_O_DENY_NOT_DELETE: case RTFILE_O_DENY_NOT_DELETE | RTFILE_O_DENY_READ: case RTFILE_O_DENY_NOT_DELETE | RTFILE_O_DENY_WRITE: case RTFILE_O_DENY_NOT_DELETE | RTFILE_O_DENY_WRITE | RTFILE_O_DENY_READ: break; default: AssertMsgFailed(("Invalid deny value: fOpen=%#llx\n", fOpen)); return VERR_INVALID_PARAMETER; } /* done */ *pfOpen = fOpen; return VINF_SUCCESS; } /** * Read bytes from a file at a given offset. * This function may modify the file position. * * @returns iprt status code. * @param File Handle to the file. * @param off Where to read. * @param pvBuf Where to put the bytes we read. * @param cbToRead How much to read. * @param *pcbRead How much we actually read. * If NULL an error will be returned for a partial read. */ RTR3DECL(int) RTFileReadAt(RTFILE File, RTFOFF off, void *pvBuf, size_t cbToRead, size_t *pcbRead) { int rc = RTFileSeek(File, off, RTFILE_SEEK_BEGIN, NULL); if (RT_SUCCESS(rc)) rc = RTFileRead(File, pvBuf, cbToRead, pcbRead); return rc; } /** * Write bytes to a file at a given offset. * This function may modify the file position. * * @returns iprt status code. * @param File Handle to the file. * @param off Where to write. * @param pvBuf What to write. * @param cbToWrite How much to write. * @param *pcbWritten How much we actually wrote. * If NULL an error will be returned for a partial write. */ RTR3DECL(int) RTFileWriteAt(RTFILE File, RTFOFF off, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten) { int rc = RTFileSeek(File, off, RTFILE_SEEK_BEGIN, NULL); if (RT_SUCCESS(rc)) rc = RTFileWrite(File, pvBuf, cbToWrite, pcbWritten); return rc; } /** * Gets the current file position. * * @returns File offset. * @returns ~0UUL on failure. * @param File File handle. */ RTR3DECL(uint64_t) RTFileTell(RTFILE File) { /* * Call the seek api to query the stuff. */ uint64_t off = 0; int rc = RTFileSeek(File, 0, RTFILE_SEEK_CURRENT, &off); if (RT_SUCCESS(rc)) return off; AssertMsgFailed(("RTFileSeek(%d) -> %d\n", File, rc)); return ~0ULL; } /** * Determine the maximum file size. * * @returns The max size of the file. * -1 on failure, the file position is undefined. * @param File Handle to the file. * @see RTFileGetMaxSizeEx. */ RTR3DECL(RTFOFF) RTFileGetMaxSize(RTFILE File) { RTFOFF cbMax; int rc = RTFileGetMaxSizeEx(File, &cbMax); return RT_SUCCESS(rc) ? cbMax : -1; } /** * Copies a file given the handles to both files. * * @returns VBox Status code. * * @param FileSrc The source file. The file position is unaltered. * @param FileDst The destination file. * On successful returns the file position is at the end of the file. * On failures the file position and size is undefined. */ RTDECL(int) RTFileCopyByHandles(RTFILE FileSrc, RTFILE FileDst) { return RTFileCopyByHandlesEx(FileSrc, FileDst, NULL, NULL); } /** * Copies a file. * * @returns VERR_ALREADY_EXISTS if the destination file exists. * @returns VBox Status code. * * @param pszSrc The path to the source file. * @param pszDst The path to the destination file. * This file will be created. * @param fFlags Flags, any of the RTFILECOPY_FLAGS_ \#defines. * @param pfnProgress Pointer to callback function for reporting progress. * @param pvUser User argument to pass to pfnProgress along with the completion percentage. */ RTDECL(int) RTFileCopyEx(const char *pszSrc, const char *pszDst, uint32_t fFlags, PFNRTPROGRESS pfnProgress, void *pvUser) { /* * Validate input. */ AssertMsgReturn(VALID_PTR(pszSrc), ("pszSrc=%p\n", pszSrc), VERR_INVALID_PARAMETER); AssertMsgReturn(*pszSrc, ("pszSrc=%p\n", pszSrc), VERR_INVALID_PARAMETER); AssertMsgReturn(VALID_PTR(pszDst), ("pszDst=%p\n", pszDst), VERR_INVALID_PARAMETER); AssertMsgReturn(*pszDst, ("pszDst=%p\n", pszDst), VERR_INVALID_PARAMETER); AssertMsgReturn(!pfnProgress || VALID_PTR(pfnProgress), ("pfnProgress=%p\n", pfnProgress), VERR_INVALID_PARAMETER); AssertMsgReturn(!(fFlags & ~RTFILECOPY_FLAGS_MASK), ("%#x\n", fFlags), VERR_INVALID_PARAMETER); /* * Open the files. */ RTFILE FileSrc; int rc = RTFileOpen(&FileSrc, pszSrc, RTFILE_O_READ | RTFILE_O_OPEN | (fFlags & RTFILECOPY_FLAGS_NO_SRC_DENY_WRITE ? RTFILE_O_DENY_NONE : RTFILE_O_DENY_WRITE)); if (RT_SUCCESS(rc)) { RTFILE FileDst; rc = RTFileOpen(&FileDst, pszDst, RTFILE_O_WRITE | RTFILE_O_CREATE | (fFlags & RTFILECOPY_FLAGS_NO_DST_DENY_WRITE ? RTFILE_O_DENY_NONE : RTFILE_O_DENY_WRITE)); if (RT_SUCCESS(rc)) { /* * Call the ByHandles version and let it do the job. */ rc = RTFileCopyByHandlesEx(FileSrc, FileDst, pfnProgress, pvUser); /* * Close the files regardless of the result. * Don't bother cleaning up or anything like that. */ int rc2 = RTFileClose(FileDst); AssertRC(rc2); if (RT_FAILURE(rc2) && RT_SUCCESS(rc)) rc = rc2; } int rc2 = RTFileClose(FileSrc); AssertRC(rc2); if (RT_FAILURE(rc2) && RT_SUCCESS(rc)) rc = rc2; } return rc; } /** * Copies a file given the handles to both files and * provide progress callbacks. * * @returns VBox Status code. * * @param FileSrc The source file. The file position is unaltered. * @param FileDst The destination file. * On successful returns the file position is at the end of the file. * On failures the file position and size is undefined. * @param pfnProgress Pointer to callback function for reporting progress. * @param pvUser User argument to pass to pfnProgress along with the completion percentage. */ RTDECL(int) RTFileCopyByHandlesEx(RTFILE FileSrc, RTFILE FileDst, PFNRTPROGRESS pfnProgress, void *pvUser) { /* * Validate input. */ AssertMsgReturn(RTFileIsValid(FileSrc), ("FileSrc=%RTfile\n", FileSrc), VERR_INVALID_PARAMETER); AssertMsgReturn(RTFileIsValid(FileDst), ("FileDst=%RTfile\n", FileDst), VERR_INVALID_PARAMETER); AssertMsgReturn(!pfnProgress || VALID_PTR(pfnProgress), ("pfnProgress=%p\n", pfnProgress), VERR_INVALID_PARAMETER); /* * Save file offset. */ RTFOFF offSrcSaved; int rc = RTFileSeek(FileSrc, 0, RTFILE_SEEK_CURRENT, (uint64_t *)&offSrcSaved); if (RT_FAILURE(rc)) return rc; /* * Get the file size. */ RTFOFF cbSrc; rc = RTFileSeek(FileSrc, 0, RTFILE_SEEK_END, (uint64_t *)&cbSrc); if (RT_FAILURE(rc)) return rc; /* * Allocate buffer. */ size_t cbBuf; uint8_t *pbBufFree = NULL; uint8_t *pbBuf; if (cbSrc < _512K) { cbBuf = 8*_1K; pbBuf = (uint8_t *)alloca(cbBuf); } else { cbBuf = _128K; pbBuf = pbBufFree = (uint8_t *)RTMemTmpAlloc(cbBuf); } if (pbBuf) { /* * Seek to the start of each file * and set the size of the destination file. */ rc = RTFileSeek(FileSrc, 0, RTFILE_SEEK_BEGIN, NULL); if (RT_SUCCESS(rc)) { rc = RTFileSeek(FileDst, 0, RTFILE_SEEK_BEGIN, NULL); if (RT_SUCCESS(rc)) rc = RTFileSetSize(FileDst, cbSrc); if (RT_SUCCESS(rc) && pfnProgress) rc = pfnProgress(0, pvUser); if (RT_SUCCESS(rc)) { /* * Copy loop. */ unsigned uPercentage = 0; RTFOFF off = 0; RTFOFF cbPercent = cbSrc / 100; RTFOFF offNextPercent = cbPercent; while (off < cbSrc) { /* copy block */ RTFOFF cbLeft = cbSrc - off; size_t cbBlock = cbLeft >= (RTFOFF)cbBuf ? cbBuf : (size_t)cbLeft; rc = RTFileRead(FileSrc, pbBuf, cbBlock, NULL); if (RT_FAILURE(rc)) break; rc = RTFileWrite(FileDst, pbBuf, cbBlock, NULL); if (RT_FAILURE(rc)) break; /* advance */ off += cbBlock; if (pfnProgress && offNextPercent < off) { while (offNextPercent < off) { uPercentage++; offNextPercent += cbPercent; } rc = pfnProgress(uPercentage, pvUser); if (RT_FAILURE(rc)) break; } } #if 0 /* * Copy OS specific data (EAs and stuff). */ rtFileCopyOSStuff(FileSrc, FileDst); #endif /* 100% */ if (pfnProgress && uPercentage < 100 && RT_SUCCESS(rc)) rc = pfnProgress(100, pvUser); } } RTMemTmpFree(pbBufFree); } else rc = VERR_NO_MEMORY; /* * Restore source position. */ RTFileSeek(FileSrc, offSrcSaved, RTFILE_SEEK_BEGIN, NULL); return rc; }