/* $Id: tstRTCritSect.cpp 62721 2016-07-29 22:31:28Z vboxsync $ */ /** @file * IPRT Testcase - Critical Sections. */ /* * Copyright (C) 2006-2016 Oracle Corporation * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. * * The contents of this file may alternatively be used under the terms * of the Common Development and Distribution License Version 1.0 * (CDDL) only, as it comes in the "COPYING.CDDL" file of the * VirtualBox OSE distribution, in which case the provisions of the * CDDL are applicable instead of those of the GPL. * * You may elect to license modified versions of this file under the * terms and conditions of either the GPL or the CDDL or both. */ /********************************************************************************************************************************* * Header Files * *********************************************************************************************************************************/ #ifdef TRY_WIN32_CRIT # include #endif #define RTCRITSECT_WITHOUT_REMAPPING #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifndef TRY_WIN32_CRIT # define LOCKERS(sect) ((sect).cLockers) #else /* TRY_WIN32_CRIT */ /* This is for comparing with the "real thing". */ #define RTCRITSECT CRITICAL_SECTION #define PRTCRITSECT LPCRITICAL_SECTION #define LOCKERS(sect) (*(LONG volatile *)&(sect).LockCount) DECLINLINE(int) RTCritSectInit(PCRITICAL_SECTION pCritSect) { InitializeCriticalSection(pCritSect); return VINF_SUCCESS; } DECLINLINE(int) RTCritSectEnter(PCRITICAL_SECTION pCritSect) { EnterCriticalSection(pCritSect); return VINF_SUCCESS; } DECLINLINE(int) RTCritSectLeave(PCRITICAL_SECTION pCritSect) { LeaveCriticalSection(pCritSect); return VINF_SUCCESS; } DECLINLINE(int) RTCritSectDelete(PCRITICAL_SECTION pCritSect) { DeleteCriticalSection(pCritSect); return VINF_SUCCESS; } #endif /* TRY_WIN32_CRIT */ /********************************************************************************************************************************* * Structures and Typedefs * *********************************************************************************************************************************/ /** * Arguments to ThreadTest1(). */ typedef struct THREADTEST1ARGS { /** The critical section. */ PRTCRITSECT pCritSect; /** The thread ordinal. */ uint32_t iThread; /** Pointer to the release counter. */ uint32_t volatile *pu32Release; } THREADTEST1ARGS, *PTHREADTEST1ARGS; /** * Arguments to ThreadTest2(). */ typedef struct THREADTEST2ARGS { /** The critical section. */ PRTCRITSECT pCritSect; /** The thread ordinal. */ uint32_t iThread; /** Pointer to the release counter. */ uint32_t volatile *pu32Release; /** Pointer to the alone indicator. */ uint32_t volatile *pu32Alone; /** Pointer to the previous thread variable. */ uint32_t volatile *pu32Prev; /** Pointer to the sequential enters counter. */ uint32_t volatile *pcSeq; /** Pointer to the reordered enters counter. */ uint32_t volatile *pcReordered; /** Pointer to the variable counting running threads. */ uint32_t volatile *pcThreadRunning; /** Number of times this thread was inside the section. */ uint32_t volatile cTimes; /** The number of threads. */ uint32_t cThreads; /** Number of iterations (sum of all threads). */ uint32_t cIterations; /** Yield while inside the section. */ unsigned cCheckLoops; /** Signal this when done. */ RTSEMEVENT EventDone; } THREADTEST2ARGS, *PTHREADTEST2ARGS; /********************************************************************************************************************************* * Global Variables * *********************************************************************************************************************************/ /** The test handle. */ static RTTEST g_hTest; /** * Thread which goes to sleep on the critsect and checks that it's released in the right order. */ static DECLCALLBACK(int) ThreadTest1(RTTHREAD ThreadSelf, void *pvArgs) { RT_NOREF1(ThreadSelf); THREADTEST1ARGS Args = *(PTHREADTEST1ARGS)pvArgs; Log2(("ThreadTest1: Start - iThread=%d ThreadSelf=%p\n", Args.iThread, ThreadSelf)); RTMemFree(pvArgs); /* * Enter it. */ int rc = RTCritSectEnter(Args.pCritSect); if (RT_FAILURE(rc)) { RTTestFailed(g_hTest, "thread %d: RTCritSectEnter -> %Rrc", Args.iThread, rc); return 1; } /* * Check release order. */ if (*Args.pu32Release != Args.iThread) RTTestFailed(g_hTest, "thread %d: released as number %d", Args.iThread, *Args.pu32Release); ASMAtomicIncU32(Args.pu32Release); /* * Leave it. */ rc = RTCritSectLeave(Args.pCritSect); if (RT_FAILURE(rc)) { RTTestFailed(g_hTest, "thread %d: RTCritSectEnter -> %Rrc", Args.iThread, rc); return 1; } Log2(("ThreadTest1: End - iThread=%d ThreadSelf=%p\n", Args.iThread, ThreadSelf)); return 0; } static int Test1(unsigned cThreads) { RTTestSubF(g_hTest, "Test #1 with %u thread", cThreads); /* * Create a critical section. */ RTCRITSECT CritSect; RTTEST_CHECK_RC_RET(g_hTest, RTCritSectInit(&CritSect), VINF_SUCCESS, 1); /* * Enter, leave and enter again. */ RTTEST_CHECK_RC_RET(g_hTest, RTCritSectEnter(&CritSect), VINF_SUCCESS, 1); RTTEST_CHECK_RC_RET(g_hTest, RTCritSectLeave(&CritSect), VINF_SUCCESS, 1); RTTEST_CHECK_RC_RET(g_hTest, RTCritSectEnter(&CritSect), VINF_SUCCESS, 1); /* * Now spawn threads which will go to sleep entering the critsect. */ uint32_t u32Release = 0; for (uint32_t iThread = 0; iThread < cThreads; iThread++) { PTHREADTEST1ARGS pArgs = (PTHREADTEST1ARGS)RTMemAllocZ(sizeof(*pArgs)); pArgs->iThread = iThread; pArgs->pCritSect = &CritSect; pArgs->pu32Release = &u32Release; int32_t iLock = LOCKERS(CritSect); RTTHREAD Thread; RTTEST_CHECK_RC_RET(g_hTest, RTThreadCreateF(&Thread, ThreadTest1, pArgs, 0, RTTHREADTYPE_DEFAULT, 0, "T%d", iThread), VINF_SUCCESS, 1); /* wait for it to get into waiting. */ while (LOCKERS(CritSect) == iLock) RTThreadSleep(10); RTThreadSleep(20); } /* * Now we'll release the threads and wait for all of them to quit. */ u32Release = 0; RTTEST_CHECK_RC_RET(g_hTest, RTCritSectLeave(&CritSect), VINF_SUCCESS, 1); while (u32Release < cThreads) RTThreadSleep(10); RTTEST_CHECK_RC_RET(g_hTest, RTCritSectDelete(&CritSect), VINF_SUCCESS, 1); return 0; } /** * Thread which goes to sleep on the critsect and checks * that it's released along and in the right order. This is done a number of times. * */ static DECLCALLBACK(int) ThreadTest2(RTTHREAD ThreadSelf, void *pvArg) { RT_NOREF1(ThreadSelf); PTHREADTEST2ARGS pArgs = (PTHREADTEST2ARGS)pvArg; Log2(("ThreadTest2: Start - iThread=%d ThreadSelf=%p\n", pArgs->iThread, ThreadSelf)); uint64_t u64TSStart = 0; ASMAtomicIncU32(pArgs->pcThreadRunning); for (unsigned i = 0; *pArgs->pu32Release < pArgs->cIterations; i++) { /* * Enter it. */ int rc = RTCritSectEnter(pArgs->pCritSect); if (RT_FAILURE(rc)) { RTTestFailed(g_hTest, "thread %d, iteration %d: RTCritSectEnter -> %d", pArgs->iThread, i, rc); return 1; } if (!u64TSStart) u64TSStart = RTTimeNanoTS(); #if 0 /* We just check for sequences. */ /* * Check release order. */ if ((*pArgs->pu32Release % pArgs->cThreads) != pArgs->iThread) RTTestFailed(g_hTest, "thread %d, iteration %d: released as number %d (%d)", pArgs->iThread, i, *pArgs->pu32Release % pArgs->cThreads, *pArgs->pu32Release); else RTTestPrintf(g_hTest, RTTESTLVL_INFO, "iteration %d: released as number %d (%d)\n", pArgs->iThread, i, *pArgs->pu32Release % pArgs->cThreads, *pArgs->pu32Release); #endif pArgs->cTimes++; ASMAtomicIncU32(pArgs->pu32Release); /* * Check distribution every now and again. */ #if 0 if (!(*pArgs->pu32Release % 879)) { uint32_t u32Perfect = *pArgs->pu32Release / pArgs->cThreads; for (int iThread = 0 ; iThread < (int)pArgs->cThreads; iThread++) { int cDiff = pArgs[iThread - pArgs->iThread].cTimes - u32Perfect; if ((unsigned)RT_ABS(cDiff) > RT_MAX(u32Perfect / 10000, 2)) { printf("tstCritSect: FAILURE - bad distribution thread %d u32Perfect=%d cTimes=%d cDiff=%d (runtime)\n", iThread, u32Perfect, pArgs[iThread - pArgs->iThread].cTimes, cDiff); ASMAtomicIncU32(&g_cErrors); } } } #endif /* * Check alone and make sure we stay inside here a while * so the other guys can get ready. */ uint32_t u32; for (u32 = 0; u32 < pArgs->cCheckLoops; u32++) { if (*pArgs->pu32Alone != ~0U) { RTTestFailed(g_hTest, "thread %d, iteration %d: not alone!!!", pArgs->iThread, i); //AssertReleaseMsgFailed(("Not alone!\n")); return 1; } } ASMAtomicCmpXchgU32(pArgs->pu32Alone, pArgs->iThread, UINT32_MAX); for (u32 = 0; u32 < pArgs->cCheckLoops; u32++) { if (*pArgs->pu32Alone != pArgs->iThread) { RTTestFailed(g_hTest, "thread %d, iteration %d: not alone!!!", pArgs->iThread, i); //AssertReleaseMsgFailed(("Not alone!\n")); return 1; } } ASMAtomicXchgU32(pArgs->pu32Alone, UINT32_MAX); /* * Check for sequences. */ if (*pArgs->pu32Prev == pArgs->iThread && pArgs->cThreads > 1) ASMAtomicIncU32(pArgs->pcSeq); else if ((*pArgs->pu32Prev + 1) % pArgs->cThreads != pArgs->iThread) ASMAtomicIncU32(pArgs->pcReordered); ASMAtomicXchgU32(pArgs->pu32Prev, pArgs->iThread); /* * Leave it. */ rc = RTCritSectLeave(pArgs->pCritSect); if (RT_FAILURE(rc)) { RTTestFailed(g_hTest, "thread %d, iteration %d: RTCritSectEnter -> %d", pArgs->iThread, i, rc); return 1; } } uint64_t u64TSEnd = RTTimeNanoTS(); NOREF(u64TSEnd); ASMAtomicDecU32(pArgs->pcThreadRunning); RTSemEventSignal(pArgs->EventDone); Log2(("ThreadTest2: End - iThread=%d ThreadSelf=%p time=%lld\n", pArgs->iThread, ThreadSelf, u64TSEnd - u64TSStart)); return 0; } static int Test2(unsigned cThreads, unsigned cIterations, unsigned cCheckLoops) { RTTestSubF(g_hTest, "Test #2 - cThreads=%u cIterations=%u cCheckLoops=%u", cThreads, cIterations, cCheckLoops); /* * Create a critical section. */ RTCRITSECT CritSect; int rc; RTTEST_CHECK_RC_RET(g_hTest, RTCritSectInit(&CritSect), VINF_SUCCESS, 1); /* * Enter, leave and enter again. */ RTTEST_CHECK_RC_RET(g_hTest, RTCritSectEnter(&CritSect), VINF_SUCCESS, 1); RTTEST_CHECK_RC_RET(g_hTest, RTCritSectLeave(&CritSect), VINF_SUCCESS, 1); RTTEST_CHECK_RC_RET(g_hTest, RTCritSectEnter(&CritSect), VINF_SUCCESS, 1); /* * Now spawn threads which will go to sleep entering the critsect. */ PTHREADTEST2ARGS paArgs = (PTHREADTEST2ARGS)RTMemAllocZ(sizeof(THREADTEST2ARGS) * cThreads); RTSEMEVENT EventDone; RTTEST_CHECK_RC_RET(g_hTest, RTSemEventCreate(&EventDone), VINF_SUCCESS, 1); uint32_t volatile u32Release = 0; uint32_t volatile u32Alone = UINT32_MAX; uint32_t volatile u32Prev = UINT32_MAX; uint32_t volatile cSeq = 0; uint32_t volatile cReordered = 0; uint32_t volatile cThreadRunning = 0; unsigned iThread; for (iThread = 0; iThread < cThreads; iThread++) { paArgs[iThread].iThread = iThread; paArgs[iThread].pCritSect = &CritSect; paArgs[iThread].pu32Release = &u32Release; paArgs[iThread].pu32Alone = &u32Alone; paArgs[iThread].pu32Prev = &u32Prev; paArgs[iThread].pcSeq = &cSeq; paArgs[iThread].pcReordered = &cReordered; paArgs[iThread].pcThreadRunning = &cThreadRunning; paArgs[iThread].cTimes = 0; paArgs[iThread].cThreads = cThreads; paArgs[iThread].cIterations = cIterations; paArgs[iThread].cCheckLoops = cCheckLoops; paArgs[iThread].EventDone = EventDone; int32_t iLock = LOCKERS(CritSect); char szThread[17]; RTStrPrintf(szThread, sizeof(szThread), "T%d", iThread); RTTHREAD Thread; rc = RTThreadCreate(&Thread, ThreadTest2, &paArgs[iThread], 0, RTTHREADTYPE_DEFAULT, 0, szThread); if (RT_FAILURE(rc)) { RTTestFailed(g_hTest, "RTThreadCreate -> %d", rc); return 1; } /* wait for it to get into waiting. */ while (LOCKERS(CritSect) == iLock) RTThreadSleep(10); RTThreadSleep(20); } RTTestPrintf(g_hTest, RTTESTLVL_INFO, "threads created...\n"); /* * Now we'll release the threads and wait for all of them to quit. */ u32Release = 0; uint64_t u64TSStart = RTTimeNanoTS(); RTTEST_CHECK_RC_RET(g_hTest, RTCritSectLeave(&CritSect), VINF_SUCCESS, 1); while (cThreadRunning > 0) RTSemEventWait(EventDone, RT_INDEFINITE_WAIT); uint64_t u64TSEnd = RTTimeNanoTS(); /* * Clean up and report results. */ RTTEST_CHECK_RC(g_hTest, RTCritSectDelete(&CritSect), VINF_SUCCESS); /* sequences */ if (cSeq > RT_MAX(u32Release / 10000, 1)) RTTestFailed(g_hTest, "too many same thread sequences! cSeq=%d\n", cSeq); /* distribution caused by sequences / reordering. */ unsigned cDiffTotal = 0; uint32_t u32Perfect = (u32Release + cThreads / 2) / cThreads; for (iThread = 0; iThread < cThreads; iThread++) { int cDiff = paArgs[iThread].cTimes - u32Perfect; if ((unsigned)RT_ABS(cDiff) > RT_MAX(u32Perfect / 10000, 2)) RTTestFailed(g_hTest, "bad distribution thread %d u32Perfect=%d cTimes=%d cDiff=%d\n", iThread, u32Perfect, paArgs[iThread].cTimes, cDiff); cDiffTotal += RT_ABS(cDiff); } uint32_t cMillies = (uint32_t)((u64TSEnd - u64TSStart) / 1000000); RTTestPrintf(g_hTest, RTTESTLVL_ALWAYS, "%d enter+leave in %dms cSeq=%d cReordered=%d cDiffTotal=%d\n", u32Release, cMillies, cSeq, cReordered, cDiffTotal); return 0; } int main(int argc, char **argv) { RTTEST hTest; #ifndef TRY_WIN32_CRT int rc = RTTestInitAndCreate("tstRTCritSect", &hTest); #else int rc = RTTestInitAndCreate("tstRTCritSectW32", &hTest); #endif if (rc) return rc; RTTestBanner(hTest); g_hTest = hTest; /* parse args. */ static const RTGETOPTDEF s_aOptions[] = { { "--distribution", 'd', RTGETOPT_REQ_NOTHING }, { "--help", 'h', RTGETOPT_REQ_NOTHING } }; bool fTestDistribution = false; int ch; RTGETOPTUNION ValueUnion; RTGETOPTSTATE GetState; RTGetOptInit(&GetState, argc, argv, s_aOptions, RT_ELEMENTS(s_aOptions), 1, 0); while ((ch = RTGetOpt(&GetState, &ValueUnion))) { switch (ch) { case 'd': fTestDistribution = true; break; case 'h': RTTestIPrintf(RTTESTLVL_ALWAYS, "%s [--help|-h] [--distribution|-d]\n", argv[0]); return 1; case 'V': RTPrintf("$Revision: 62721 $\n"); return 0; default: return RTGetOptPrintError(ch, &ValueUnion); } } /* * Perform the testing. */ if ( !Test1(1) && !Test1(3) && !Test1(10) && !Test1(63)) { if ( fTestDistribution && !Test2(1, 200000, 1000) && !Test2(2, 200000, 1000) && !Test2(3, 200000, 1000) && !Test2(4, 200000, 1000) && !Test2(5, 200000, 1000) && !Test2(7, 200000, 1000) && !Test2(67, 200000, 1000)) { /*nothing*/; } } /* * Summary. */ return RTTestSummaryAndDestroy(hTest); }