/* $Id: IOM.cpp 7752 2008-04-04 17:35:14Z vboxsync $ */ /** @file * IOM - Input / Output Monitor. */ /* * Copyright (C) 2006-2007 innotek GmbH * * This file is part of VirtualBox Open Source Edition (OSE), as * available from http://www.virtualbox.org. This file is free software; * you can redistribute it and/or modify it under the terms of the GNU * General Public License (GPL) as published by the Free Software * Foundation, in version 2 as it comes in the "COPYING" file of the * VirtualBox OSE distribution. VirtualBox OSE is distributed in the * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. */ /** @page pg_iom IOM - The Input/Output Monitor * * The input/output monitor will handle I/O exceptions routing them to the * appropriate device. It implements an API to register and deregister * virtual port I/O handler and memory mapped I/O handlers. A handler is * PDM devices and a set of callback functions. * * Port I/O (PIO) is easily trapped by ensuring IOPL is 0, thus causing \#GP(0) on * any access to I/O ports. Using the dissassembler (DIS) the faulting * instruction will be interpreted determing the port and if there is a handler * for it. If a handler exists it will be called, else default action will be * performed. * * Memory Mapped I/O (MMIO) is gonna be worse since there are numerous instructions * which can access memory. I'm afraid we might have to emulate each * instruction which faults. The Execution Monitor (EM) will provide facilities * for doing this using DIS. * * Emulating I/O port access is less complex and sligtly faster than emulating MMIO, * so in most cases we should encourage the OS to use PIO. Devices which are freqently * accessed should register GC handlers to speed up execution. * */ /******************************************************************************* * Header Files * *******************************************************************************/ #define LOG_GROUP LOG_GROUP_IOM #include #include #include #include #include #include #include #include #include "IOMInternal.h" #include #include #include #include #include #include #include /******************************************************************************* * Internal Functions * *******************************************************************************/ static void iomR3FlushCache(PVM pVM); static DECLCALLBACK(int) iomr3RelocateIOPortCallback(PAVLROIOPORTNODECORE pNode, void *pvUser); static DECLCALLBACK(int) iomr3RelocateMMIOCallback(PAVLROGCPHYSNODECORE pNode, void *pvUser); static DECLCALLBACK(void) iomR3IOPortInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); static DECLCALLBACK(void) iomR3MMIOInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs); static DECLCALLBACK(int) iomR3IOPortDummyIn(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb); static DECLCALLBACK(int) iomR3IOPortDummyOut(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb); static DECLCALLBACK(int) iomR3IOPortDummyInStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, unsigned *pcTransfer, unsigned cb); static DECLCALLBACK(int) iomR3IOPortDummyOutStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, unsigned *pcTransfer, unsigned cb); #ifdef VBOX_WITH_STATISTICS static const char *iomr3IOPortGetStandardName(RTIOPORT Port); #endif /** * Initializes the IOM. * * @returns VBox status code. * @param pVM The VM to operate on. */ IOMR3DECL(int) IOMR3Init(PVM pVM) { LogFlow(("IOMR3Init:\n")); /* * Assert alignment and sizes. */ AssertRelease(!(RT_OFFSETOF(VM, iom.s) & 31)); AssertRelease(sizeof(pVM->iom.s) <= sizeof(pVM->iom.padding)); /* * Setup any fixed pointers and offsets. */ pVM->iom.s.offVM = RT_OFFSETOF(VM, iom); /* * Allocate the trees structure. */ int rc = MMHyperAlloc(pVM, sizeof(*pVM->iom.s.pTreesHC), 0, MM_TAG_IOM, (void **)&pVM->iom.s.pTreesHC); if (VBOX_SUCCESS(rc)) { pVM->iom.s.pTreesGC = MMHyperHC2GC(pVM, pVM->iom.s.pTreesHC); pVM->iom.s.pfnMMIOHandlerGC = NIL_RTGCPTR; pVM->iom.s.pfnMMIOHandlerR0 = NIL_RTR0PTR; /* * Info. */ DBGFR3InfoRegisterInternal(pVM, "ioport", "Dumps all IOPort ranges. No arguments.", &iomR3IOPortInfo); DBGFR3InfoRegisterInternal(pVM, "mmio", "Dumps all MMIO ranges. No arguments.", &iomR3MMIOInfo); /* * Statistics. */ STAM_REG(pVM, &pVM->iom.s.StatGCMMIOHandler, STAMTYPE_PROFILE, "/IOM/GC/MMIOHandler", STAMUNIT_TICKS_PER_CALL, "Profiling of the IOMGCMMIOHandler() body, only success calls."); STAM_REG(pVM, &pVM->iom.s.StatGCMMIOFailures, STAMTYPE_COUNTER, "/IOM/GC/MMIOFailures", STAMUNIT_OCCURENCES, "Number of times IOMGCMMIOHandler() didn't service the request."); STAM_REG(pVM, &pVM->iom.s.StatGCInstMov, STAMTYPE_PROFILE, "/IOM/GC/Inst/MOV", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOV instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstCmp, STAMTYPE_PROFILE, "/IOM/GC/Inst/CMP", STAMUNIT_TICKS_PER_CALL, "Profiling of the CMP instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstAnd, STAMTYPE_PROFILE, "/IOM/GC/Inst/AND", STAMUNIT_TICKS_PER_CALL, "Profiling of the AND instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstTest, STAMTYPE_PROFILE, "/IOM/GC/Inst/TEST", STAMUNIT_TICKS_PER_CALL, "Profiling of the TEST instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstXchg, STAMTYPE_PROFILE, "/IOM/GC/Inst/XCHG", STAMUNIT_TICKS_PER_CALL, "Profiling of the XCHG instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstStos, STAMTYPE_PROFILE, "/IOM/GC/Inst/STOS", STAMUNIT_TICKS_PER_CALL, "Profiling of the STOS instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstLods, STAMTYPE_PROFILE, "/IOM/GC/Inst/LODS", STAMUNIT_TICKS_PER_CALL, "Profiling of the LODS instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstMovs, STAMTYPE_PROFILE, "/IOM/GC/Inst/MOVS", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation."); STAM_REG(pVM, &pVM->iom.s.StatGCInstMovsToMMIO, STAMTYPE_PROFILE, "/IOM/GC/Inst/MOVS/ToMMIO", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation - Mem2MMIO."); STAM_REG(pVM, &pVM->iom.s.StatGCInstMovsFromMMIO, STAMTYPE_PROFILE, "/IOM/GC/Inst/MOVS/FromMMIO", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation - MMIO2Mem."); STAM_REG(pVM, &pVM->iom.s.StatGCInstMovsMMIO, STAMTYPE_PROFILE, "/IOM/GC/Inst/MOVS/MMIO2MMIO", STAMUNIT_TICKS_PER_CALL, "Profiling of the MOVS instruction emulation - MMIO2MMIO."); STAM_REG(pVM, &pVM->iom.s.StatGCInstOther, STAMTYPE_COUNTER, "/IOM/GC/Inst/Other", STAMUNIT_OCCURENCES, "Other instructions counter."); STAM_REG(pVM, &pVM->iom.s.StatGCMMIO1Byte, STAMTYPE_COUNTER, "/IOM/GC/MMIO/Access1", STAMUNIT_OCCURENCES, "MMIO access by 1 byte counter."); STAM_REG(pVM, &pVM->iom.s.StatGCMMIO2Bytes, STAMTYPE_COUNTER, "/IOM/GC/MMIO/Access2", STAMUNIT_OCCURENCES, "MMIO access by 2 bytes counter."); STAM_REG(pVM, &pVM->iom.s.StatGCMMIO4Bytes, STAMTYPE_COUNTER, "/IOM/GC/MMIO/Access4", STAMUNIT_OCCURENCES, "MMIO access by 4 bytes counter."); STAM_REG(pVM, &pVM->iom.s.StatGCIOPortHandler, STAMTYPE_PROFILE, "/IOM/GC/PortIOHandler", STAMUNIT_TICKS_PER_CALL, "Profiling of the IOMGCPortIOHandler() body, only success calls."); STAM_REG(pVM, &pVM->iom.s.StatGCInstIn, STAMTYPE_COUNTER, "/IOM/GC/Inst/In", STAMUNIT_OCCURENCES, "Counter of any IN instructions."); STAM_REG(pVM, &pVM->iom.s.StatGCInstOut, STAMTYPE_COUNTER, "/IOM/GC/Inst/Out", STAMUNIT_OCCURENCES, "Counter of any OUT instructions."); STAM_REG(pVM, &pVM->iom.s.StatGCInstIns, STAMTYPE_COUNTER, "/IOM/GC/Inst/Ins", STAMUNIT_OCCURENCES, "Counter of any INS instructions."); STAM_REG(pVM, &pVM->iom.s.StatGCInstOuts, STAMTYPE_COUNTER, "/IOM/GC/Inst/Outs", STAMUNIT_OCCURENCES, "Counter of any OUTS instructions."); } /* Redundant, but just in case we change something in the future */ iomR3FlushCache(pVM); LogFlow(("IOMR3Init: returns %Vrc\n", rc)); return rc; } /** * Flushes the IOM port & statistics lookup cache * * @param pVM The VM. */ static void iomR3FlushCache(PVM pVM) { /* * Caching of port and statistics (saves some time in rep outs/ins instruction emulation) */ pVM->iom.s.pRangeLastReadR0 = NIL_RTR0PTR; pVM->iom.s.pRangeLastWriteR0 = NIL_RTR0PTR; pVM->iom.s.pStatsLastReadR0 = NIL_RTR0PTR; pVM->iom.s.pStatsLastWriteR0 = NIL_RTR0PTR; pVM->iom.s.pMMIORangeLastR0 = NIL_RTR0PTR; pVM->iom.s.pMMIOStatsLastR0 = NIL_RTR0PTR; pVM->iom.s.pRangeLastReadR3 = NULL; pVM->iom.s.pRangeLastWriteR3 = NULL; pVM->iom.s.pStatsLastReadR3 = NULL; pVM->iom.s.pStatsLastWriteR3 = NULL; pVM->iom.s.pMMIORangeLastR3 = NULL; pVM->iom.s.pMMIOStatsLastR3 = NULL; pVM->iom.s.pRangeLastReadGC = NIL_RTGCPTR; pVM->iom.s.pRangeLastWriteGC = NIL_RTGCPTR; pVM->iom.s.pStatsLastReadGC = NIL_RTGCPTR; pVM->iom.s.pStatsLastWriteGC = NIL_RTGCPTR; pVM->iom.s.pMMIORangeLastGC = NIL_RTGCPTR; pVM->iom.s.pMMIOStatsLastGC = NIL_RTGCPTR; } /** * The VM is being reset. * * @param pVM VM handle. */ IOMR3DECL(void) IOMR3Reset(PVM pVM) { iomR3FlushCache(pVM); } /** * Applies relocations to data and code managed by this * component. This function will be called at init and * whenever the VMM need to relocate it self inside the GC. * * The IOM will update the addresses used by the switcher. * * @param pVM The VM. * @param offDelta Relocation delta relative to old location. */ IOMR3DECL(void) IOMR3Relocate(PVM pVM, RTGCINTPTR offDelta) { LogFlow(("IOMR3Relocate: offDelta=%d\n", offDelta)); /* * Apply relocations to the GC callbacks. */ pVM->iom.s.pTreesGC = MMHyperHC2GC(pVM, pVM->iom.s.pTreesHC); RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesHC->IOPortTreeGC, true, iomr3RelocateIOPortCallback, &offDelta); RTAvlroGCPhysDoWithAll(&pVM->iom.s.pTreesHC->MMIOTree, true, iomr3RelocateMMIOCallback, &offDelta); if (pVM->iom.s.pfnMMIOHandlerGC) pVM->iom.s.pfnMMIOHandlerGC += offDelta; /* * Apply relocations to the cached GC handlers */ if (pVM->iom.s.pRangeLastReadGC) pVM->iom.s.pRangeLastReadGC += offDelta; if (pVM->iom.s.pRangeLastWriteGC) pVM->iom.s.pRangeLastWriteGC += offDelta; if (pVM->iom.s.pStatsLastReadGC) pVM->iom.s.pStatsLastReadGC += offDelta; if (pVM->iom.s.pStatsLastWriteGC) pVM->iom.s.pStatsLastWriteGC += offDelta; if (pVM->iom.s.pMMIORangeLastGC) pVM->iom.s.pMMIORangeLastGC += offDelta; if (pVM->iom.s.pMMIOStatsLastGC) pVM->iom.s.pMMIOStatsLastGC += offDelta; } /** * Callback function for relocating a I/O port range. * * @returns 0 (continue enum) * @param pNode Pointer to a IOMIOPORTRANGEGC node. * @param pvUser Pointer to the offDelta. This is a pointer to the delta since we're * not certain the delta will fit in a void pointer for all possible configs. */ static DECLCALLBACK(int) iomr3RelocateIOPortCallback(PAVLROIOPORTNODECORE pNode, void *pvUser) { PIOMIOPORTRANGEGC pRange = (PIOMIOPORTRANGEGC)pNode; RTGCINTPTR offDelta = *(PRTGCINTPTR)pvUser; Assert(pRange->pDevIns); pRange->pDevIns += offDelta; if (pRange->pfnOutCallback) pRange->pfnOutCallback += offDelta; if (pRange->pfnInCallback) pRange->pfnInCallback += offDelta; if (pRange->pfnOutStrCallback) pRange->pfnOutStrCallback += offDelta; if (pRange->pfnInStrCallback) pRange->pfnInStrCallback += offDelta; if (pRange->pvUser > _64K) pRange->pvUser += offDelta; return 0; } /** * Callback function for relocating a MMIO range. * * @returns 0 (continue enum) * @param pNode Pointer to a IOMMMIORANGE node. * @param pvUser Pointer to the offDelta. This is a pointer to the delta since we're * not certain the delta will fit in a void pointer for all possible configs. */ static DECLCALLBACK(int) iomr3RelocateMMIOCallback(PAVLROGCPHYSNODECORE pNode, void *pvUser) { PIOMMMIORANGE pRange = (PIOMMMIORANGE)pNode; RTGCINTPTR offDelta = *(PRTGCINTPTR)pvUser; if (pRange->pDevInsGC) pRange->pDevInsGC += offDelta; if (pRange->pfnWriteCallbackGC) pRange->pfnWriteCallbackGC += offDelta; if (pRange->pfnReadCallbackGC) pRange->pfnReadCallbackGC += offDelta; if (pRange->pfnFillCallbackGC) pRange->pfnFillCallbackGC += offDelta; if (pRange->pvUserGC > _64K) pRange->pvUserGC += offDelta; return 0; } /** * Terminates the IOM. * * Termination means cleaning up and freeing all resources, * the VM it self is at this point powered off or suspended. * * @returns VBox status code. * @param pVM The VM to operate on. */ IOMR3DECL(int) IOMR3Term(PVM pVM) { /* * IOM is not owning anything but automatically freed resources, * so there's nothing to do here. */ return VINF_SUCCESS; } #ifdef VBOX_WITH_STATISTICS /** * Create the statistics node for an I/O port. * * @returns Pointer to new stats node. * * @param pVM VM handle. * @param Port Port. * @param pszDesc Description. */ PIOMIOPORTSTATS iomr3IOPortStatsCreate(PVM pVM, RTIOPORT Port, const char *pszDesc) { /* check if it already exists. */ PIOMIOPORTSTATS pPort = (PIOMIOPORTSTATS)RTAvloIOPortGet(&pVM->iom.s.pTreesHC->IOPortStatTree, Port); if (pPort) return pPort; /* allocate stats node. */ int rc = MMHyperAlloc(pVM, sizeof(*pPort), 0, MM_TAG_IOM_STATS, (void **)&pPort); AssertRC(rc); if (VBOX_SUCCESS(rc)) { /* insert into the tree. */ pPort->Core.Key = Port; if (RTAvloIOPortInsert(&pVM->iom.s.pTreesHC->IOPortStatTree, &pPort->Core)) { /* put a name on common ports. */ if (!pszDesc) pszDesc = iomr3IOPortGetStandardName(Port); /* register the statistics counters. */ char szName[64]; RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-R3", Port); rc = STAMR3Register(pVM, &pPort->InR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-R3", Port); rc = STAMR3Register(pVM, &pPort->OutR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-GC", Port); rc = STAMR3Register(pVM, &pPort->InGC, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-GC", Port); rc = STAMR3Register(pVM, &pPort->OutGC, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-GC-2-R3", Port); rc = STAMR3Register(pVM, &pPort->InGCToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-GC-2-R3", Port); rc = STAMR3Register(pVM, &pPort->OutGCToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-R0", Port); rc = STAMR3Register(pVM, &pPort->InR0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-R0", Port); rc = STAMR3Register(pVM, &pPort->OutR0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-R0-2-R3", Port); rc = STAMR3Register(pVM, &pPort->InR0ToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-R0-2-R3", Port); rc = STAMR3Register(pVM, &pPort->OutR0ToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, szName, STAMUNIT_OCCURENCES, pszDesc); AssertRC(rc); /* Profiling */ RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-R3/Prof", Port); rc = STAMR3Register(pVM, &pPort->ProfInR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, szName, STAMUNIT_TICKS_PER_CALL, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-R3/Prof", Port); rc = STAMR3Register(pVM, &pPort->ProfOutR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, szName, STAMUNIT_TICKS_PER_CALL, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-GC/Prof", Port); rc = STAMR3Register(pVM, &pPort->ProfInGC, STAMTYPE_PROFILE, STAMVISIBILITY_USED, szName, STAMUNIT_TICKS_PER_CALL, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-GC/Prof", Port); rc = STAMR3Register(pVM, &pPort->ProfOutGC, STAMTYPE_PROFILE, STAMVISIBILITY_USED, szName, STAMUNIT_TICKS_PER_CALL, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-In-R0/Prof", Port); rc = STAMR3Register(pVM, &pPort->ProfInR0, STAMTYPE_PROFILE, STAMVISIBILITY_USED, szName, STAMUNIT_TICKS_PER_CALL, pszDesc); AssertRC(rc); RTStrPrintf(szName, sizeof(szName), "/IOM/Ports/%04x-Out-R0/Prof", Port); rc = STAMR3Register(pVM, &pPort->ProfOutR0, STAMTYPE_PROFILE, STAMVISIBILITY_USED, szName, STAMUNIT_TICKS_PER_CALL, pszDesc); AssertRC(rc); return pPort; } AssertMsgFailed(("what! Port=%d\n", Port)); MMHyperFree(pVM, pPort); } return NULL; } /** * Create the statistics node for an MMIO address. * * @returns Pointer to new stats node. * * @param pVM VM handle. * @param GCPhys The address. * @param pszDesc Description. */ PIOMMMIOSTATS iomR3MMIOStatsCreate(PVM pVM, RTGCPHYS GCPhys, const char *pszDesc) { #ifdef DEBUG_sandervl AssertGCPhys32(GCPhys); #endif /* check if it already exists. */ PIOMMMIOSTATS pStats = (PIOMMMIOSTATS)RTAvloGCPhysGet(&pVM->iom.s.pTreesHC->MMIOStatTree, GCPhys); if (pStats) return pStats; /* allocate stats node. */ int rc = MMHyperAlloc(pVM, sizeof(*pStats), 0, MM_TAG_IOM_STATS, (void **)&pStats); AssertRC(rc); if (VBOX_SUCCESS(rc)) { /* insert into the tree. */ pStats->Core.Key = GCPhys; if (RTAvloGCPhysInsert(&pVM->iom.s.pTreesHC->MMIOStatTree, &pStats->Core)) { /* register the statistics counters. */ rc = STAMR3RegisterF(pVM, &pStats->ReadR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Read-R3", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->WriteR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Write-R3", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ReadGC, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Read-GC", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->WriteGC, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Write-GC", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ReadGCToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Read-GC-2-R3", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->WriteGCToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Write-GC-2-R3", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ReadR0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Read-R0", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->WriteR0, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Write-R0", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ReadR0ToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Read-R0-2-R3", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->WriteR0ToR3, STAMTYPE_COUNTER, STAMVISIBILITY_USED, STAMUNIT_OCCURENCES, pszDesc, "/IOM/MMIO/%RGp-Write-R0-2-R3", GCPhys); AssertRC(rc); /* Profiling */ rc = STAMR3RegisterF(pVM, &pStats->ProfReadR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp-Read-R3/Prof", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ProfWriteR3, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp-Write-R3/Prof", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ProfReadGC, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp-Read-GC/Prof", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ProfWriteGC, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp-Write-GC/Prof", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ProfReadR0, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp-Read-R0/Prof", GCPhys); AssertRC(rc); rc = STAMR3RegisterF(pVM, &pStats->ProfWriteR0, STAMTYPE_PROFILE, STAMVISIBILITY_USED, STAMUNIT_TICKS_PER_CALL, pszDesc, "/IOM/MMIO/%RGp-Write-R0/Prof", GCPhys); AssertRC(rc); return pStats; } AssertMsgFailed(("what! GCPhys=%RGp\n", GCPhys)); MMHyperFree(pVM, pStats); } return NULL; } #endif /* VBOX_WITH_STATISTICS */ /** * Registers a I/O port ring-3 handler. * * This API is called by PDM on behalf of a device. Devices must first register * ring-3 ranges before any GC and R0 ranges can be registerd using IOMR3IOPortRegisterGC() * and IOMR3IOPortRegisterR0(). * * * @returns VBox status code. * * @param pVM VM handle. * @param pDevIns PDM device instance owning the port range. * @param PortStart First port number in the range. * @param cPorts Number of ports to register. * @param pvUser User argument for the callbacks. * @param pfnOutCallback Pointer to function which is gonna handle OUT operations in R3. * @param pfnInCallback Pointer to function which is gonna handle IN operations in R3. * @param pfnOutStrCallback Pointer to function which is gonna handle string OUT operations in R3. * @param pfnInStrCallback Pointer to function which is gonna handle string IN operations in R3. * @param pszDesc Pointer to description string. This must not be freed. */ IOMR3DECL(int) IOMR3IOPortRegisterR3(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTHCPTR pvUser, R3PTRTYPE(PFNIOMIOPORTOUT) pfnOutCallback, R3PTRTYPE(PFNIOMIOPORTIN) pfnInCallback, R3PTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, R3PTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback, const char *pszDesc) { LogFlow(("IOMR3IOPortRegisterR3: pDevIns=%p PortStart=%#x cPorts=%#x pvUser=%VHv pfnOutCallback=%#x pfnInCallback=%#x pfnOutStrCallback=%#x pfnInStrCallback=%#x pszDesc=%s\n", pDevIns, PortStart, cPorts, pvUser, pfnOutCallback, pfnInCallback, pszDesc, pfnOutStrCallback, pfnInStrCallback)); /* * Validate input. */ if ( (RTUINT)PortStart + cPorts <= (RTUINT)PortStart || (RTUINT)PortStart + cPorts > 0x10000) { AssertMsgFailed(("Invalid port range %#x-%#x (inclusive)! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc)); return VERR_IOM_INVALID_IOPORT_RANGE; } if (!pfnOutCallback && !pfnInCallback) { AssertMsgFailed(("no handlers specfied for %#x-%#x (inclusive)! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc)); return VERR_INVALID_PARAMETER; } if (!pfnOutCallback) pfnOutCallback = iomR3IOPortDummyOut; if (!pfnInCallback) pfnInCallback = iomR3IOPortDummyIn; if (!pfnOutStrCallback) pfnOutStrCallback = iomR3IOPortDummyOutStr; if (!pfnInStrCallback) pfnInStrCallback = iomR3IOPortDummyInStr; /* Flush the IO port lookup cache */ iomR3FlushCache(pVM); /* * Allocate new range record and initialize it. */ PIOMIOPORTRANGER3 pRange; int rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange); if (VBOX_SUCCESS(rc)) { pRange->Core.Key = PortStart; pRange->Core.KeyLast = PortStart + (cPorts - 1); pRange->Port = PortStart; pRange->cPorts = cPorts; pRange->pvUser = pvUser; pRange->pDevIns = pDevIns; pRange->pfnOutCallback = pfnOutCallback; pRange->pfnInCallback = pfnInCallback; pRange->pfnOutStrCallback = pfnOutStrCallback; pRange->pfnInStrCallback = pfnInStrCallback; pRange->pszDesc = pszDesc; /* * Try Insert it. */ if (RTAvlroIOPortInsert(&pVM->iom.s.pTreesHC->IOPortTreeR3, &pRange->Core)) { #ifdef VBOX_WITH_STATISTICS for (unsigned iPort = 0; iPort < cPorts; iPort++) iomr3IOPortStatsCreate(pVM, PortStart + iPort, pszDesc); #endif return VINF_SUCCESS; } /* conflict. */ DBGFR3Info(pVM, "ioport", NULL, NULL); AssertMsgFailed(("Port range %#x-%#x (%s) conflicts with existing range(s)!\n", PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); MMHyperFree(pVM, pRange); rc = VERR_IOM_IOPORT_RANGE_CONFLICT; } return rc; } /** * Registers a Port IO GC handler. * * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges * using IOMIOPortRegisterR3() before calling this function. * * * @returns VBox status code. * * @param pVM VM handle. * @param pDevIns PDM device instance owning the port range. * @param PortStart First port number in the range. * @param cPorts Number of ports to register. * @param pvUser User argument for the callbacks. * @param pfnOutCallback Pointer to function which is gonna handle OUT operations in GC. * @param pfnInCallback Pointer to function which is gonna handle IN operations in GC. * @param pfnOutStrCallback Pointer to function which is gonna handle string OUT operations in GC. * @param pfnInStrCallback Pointer to function which is gonna handle string IN operations in GC. * @param pszDesc Pointer to description string. This must not be freed. */ IOMR3DECL(int) IOMR3IOPortRegisterGC(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTGCPTR pvUser, GCPTRTYPE(PFNIOMIOPORTOUT) pfnOutCallback, GCPTRTYPE(PFNIOMIOPORTIN) pfnInCallback, GCPTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, GCPTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback, const char *pszDesc) { LogFlow(("IOMR3IOPortRegisterGC: pDevIns=%p PortStart=%#x cPorts=%#x pvUser=%VGv pfnOutCallback=%VGv pfnInCallback=%VGv pfnOutStrCallback=%VGv pfnInStrCallback=%VGv pszDesc=%s\n", pDevIns, PortStart, cPorts, pvUser, pfnOutCallback, pfnInCallback, pfnOutStrCallback, pfnInStrCallback, pszDesc)); /* * Validate input. */ if ( (RTUINT)PortStart + cPorts <= (RTUINT)PortStart || (RTUINT)PortStart + cPorts > 0x10000) { AssertMsgFailed(("Invalid port range %#x-%#x! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc)); return VERR_IOM_INVALID_IOPORT_RANGE; } RTIOPORT PortLast = PortStart + (cPorts - 1); if (!pfnOutCallback && !pfnInCallback) { AssertMsgFailed(("Invalid port range %#x-%#x! No callbacks! (%s)\n", PortStart, PortLast, pszDesc)); return VERR_INVALID_PARAMETER; } /* * Validate that there are ring-3 ranges for the ports. */ RTIOPORT Port = PortStart; while (Port <= PortLast && Port >= PortStart) { PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.CTXSUFF(pTrees)->IOPortTreeR3, Port); if (!pRange) { AssertMsgFailed(("No R3! Port=#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); return VERR_IOM_NO_HC_IOPORT_RANGE; } #ifndef IOM_NO_PDMINS_CHECKS # ifndef IN_GC if (pRange->pDevIns != pDevIns) # else if (pRange->pDevIns != MMHyperGC2HC(pVM, pDevIns)) # endif { AssertMsgFailed(("Not owner! Port=%#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); return VERR_IOM_NOT_IOPORT_RANGE_OWNER; } #endif Port = pRange->Core.KeyLast + 1; } /* Flush the IO port lookup cache */ iomR3FlushCache(pVM); /* * Allocate new range record and initialize it. */ PIOMIOPORTRANGEGC pRange; int rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange); if (VBOX_SUCCESS(rc)) { pRange->Core.Key = PortStart; pRange->Core.KeyLast = PortLast; pRange->Port = PortStart; pRange->cPorts = cPorts; pRange->pvUser = pvUser; pRange->pfnOutCallback = pfnOutCallback; pRange->pfnInCallback = pfnInCallback; pRange->pfnOutStrCallback = pfnOutStrCallback; pRange->pfnInStrCallback = pfnInStrCallback; #ifdef IN_GC pRange->pDevIns = pDevIns; pRange->pszDesc = MMHyperGC2HC(pVM, (void *)pszDesc); #else pRange->pDevIns = MMHyperHC2GC(pVM, pDevIns); pRange->pszDesc = pszDesc; #endif /* * Insert it. */ if (RTAvlroIOPortInsert(&pVM->iom.s.CTXSUFF(pTrees)->IOPortTreeGC, &pRange->Core)) return VINF_SUCCESS; /* conflict. */ AssertMsgFailed(("Port range %#x-%#x (%s) conflicts with existing range(s)!\n", PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); MMHyperFree(pVM, pRange); rc = VERR_IOM_IOPORT_RANGE_CONFLICT; } return rc; } /** * Registers a Port IO R0 handler. * * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges * using IOMR3IOPortRegisterR3() before calling this function. * * * @returns VBox status code. * * @param pVM VM handle. * @param pDevIns PDM device instance owning the port range. * @param PortStart First port number in the range. * @param cPorts Number of ports to register. * @param pvUser User argument for the callbacks. * @param pfnOutCallback Pointer to function which is gonna handle OUT operations in GC. * @param pfnInCallback Pointer to function which is gonna handle IN operations in GC. * @param pfnOutStrCallback Pointer to function which is gonna handle OUT operations in GC. * @param pfnInStrCallback Pointer to function which is gonna handle IN operations in GC. * @param pszDesc Pointer to description string. This must not be freed. */ IOMR3DECL(int) IOMR3IOPortRegisterR0(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts, RTR0PTR pvUser, R0PTRTYPE(PFNIOMIOPORTOUT) pfnOutCallback, R0PTRTYPE(PFNIOMIOPORTIN) pfnInCallback, R0PTRTYPE(PFNIOMIOPORTOUTSTRING) pfnOutStrCallback, R0PTRTYPE(PFNIOMIOPORTINSTRING) pfnInStrCallback, const char *pszDesc) { LogFlow(("IOMR3IOPortRegisterR0: pDevIns=%p PortStart=%#x cPorts=%#x pvUser=%VHv pfnOutCallback=%VGv pfnInCallback=%VGv pfnOutStrCallback=%VGv pfnInStrCallback=%VGv pszDesc=%s\n", pDevIns, PortStart, cPorts, pvUser, pfnOutCallback, pfnInCallback, pfnOutStrCallback, pfnInStrCallback, pszDesc)); /* * Validate input. */ if ( (RTUINT)PortStart + cPorts <= (RTUINT)PortStart || (RTUINT)PortStart + cPorts > 0x10000) { AssertMsgFailed(("Invalid port range %#x-%#x! (%s)\n", PortStart, (RTUINT)PortStart + (cPorts - 1), pszDesc)); return VERR_IOM_INVALID_IOPORT_RANGE; } RTIOPORT PortLast = PortStart + (cPorts - 1); if (!pfnOutCallback && !pfnInCallback) { AssertMsgFailed(("Invalid port range %#x-%#x! No callbacks! (%s)\n", PortStart, PortLast, pszDesc)); return VERR_INVALID_PARAMETER; } /* * Validate that there are ring-3 ranges for the ports. */ RTIOPORT Port = PortStart; while (Port <= PortLast && Port >= PortStart) { PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.CTXSUFF(pTrees)->IOPortTreeR3, Port); if (!pRange) { AssertMsgFailed(("No R3! Port=#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); return VERR_IOM_NO_HC_IOPORT_RANGE; } #ifndef IOM_NO_PDMINS_CHECKS # ifndef IN_GC if (pRange->pDevIns != pDevIns) # else if (pRange->pDevIns != MMHyperGC2HC(pVM, pDevIns)) # endif { AssertMsgFailed(("Not owner! Port=%#x %#x-%#x! (%s)\n", Port, PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); return VERR_IOM_NOT_IOPORT_RANGE_OWNER; } #endif Port = pRange->Core.KeyLast + 1; } /* Flush the IO port lookup cache */ iomR3FlushCache(pVM); /* * Allocate new range record and initialize it. */ PIOMIOPORTRANGER0 pRange; int rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange); if (VBOX_SUCCESS(rc)) { pRange->Core.Key = PortStart; pRange->Core.KeyLast = PortLast; pRange->Port = PortStart; pRange->cPorts = cPorts; pRange->pvUser = pvUser; pRange->pfnOutCallback = pfnOutCallback; pRange->pfnInCallback = pfnInCallback; pRange->pfnOutStrCallback = pfnOutStrCallback; pRange->pfnInStrCallback = pfnInStrCallback; #ifdef IN_GC pRange->pDevIns = MMHyperGCToR0(pVM, pDevIns); pRange->pszDesc = MMHyperGCToR3(pVM, (void *)pszDesc); #elif defined(IN_RING3) pRange->pDevIns = MMHyperR3ToR0(pVM, pDevIns); pRange->pszDesc = pszDesc; #else pRange->pDevIns = pDevIns; pRange->pszDesc = MMHyperR0ToR3(pVM, (RTR0PTR)pszDesc); #endif /* * Insert it. */ if (RTAvlroIOPortInsert(&pVM->iom.s.CTXSUFF(pTrees)->IOPortTreeR0, &pRange->Core)) return VINF_SUCCESS; /* conflict. */ AssertMsgFailed(("Port range %#x-%#x (%s) conflicts with existing range(s)!\n", PortStart, (unsigned)PortStart + cPorts - 1, pszDesc)); MMHyperFree(pVM, pRange); rc = VERR_IOM_IOPORT_RANGE_CONFLICT; } return rc; } /** * Deregisters a I/O Port range. * * The specified range must be registered using IOMR3IOPortRegister previous to * this call. The range does can be a smaller part of the range specified to * IOMR3IOPortRegister, but it can never be larger. * * This function will remove GC, R0 and R3 context port handlers for this range. * * @returns VBox status code. * * @param pVM The virtual machine. * @param pDevIns The device instance associated with the range. * @param PortStart First port number in the range. * @param cPorts Number of ports to remove starting at PortStart. * * @remark This function mainly for PCI PnP Config and will not do * all the checks you might expect it to do. */ IOMR3DECL(int) IOMR3IOPortDeregister(PVM pVM, PPDMDEVINS pDevIns, RTIOPORT PortStart, RTUINT cPorts) { LogFlow(("IOMR3IOPortDeregister: pDevIns=%p PortStart=%#x cPorts=%#x\n", pDevIns, PortStart, cPorts)); /* * Validate input. */ if ( (RTUINT)PortStart + cPorts < (RTUINT)PortStart || (RTUINT)PortStart + cPorts > 0x10000) { AssertMsgFailed(("Invalid port range %#x-%#x!\n", PortStart, (unsigned)PortStart + cPorts - 1)); return VERR_IOM_INVALID_IOPORT_RANGE; } /* Flush the IO port lookup cache */ iomR3FlushCache(pVM); /* * Check ownership. */ RTIOPORT PortLast = PortStart + (cPorts - 1); RTIOPORT Port = PortStart; while (Port <= PortLast && Port >= PortStart) { PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesHC->IOPortTreeR3, Port); if (pRange) { Assert(Port <= pRange->Core.KeyLast); #ifndef IOM_NO_PDMINS_CHECKS if (pRange->pDevIns != pDevIns) { AssertMsgFailed(("Removal of ports in range %#x-%#x rejected because not owner of %#x-%#x (%s)\n", PortStart, PortLast, pRange->Core.Key, pRange->Core.KeyLast, pRange->pszDesc)); return VERR_IOM_NOT_IOPORT_RANGE_OWNER; } #endif /* !IOM_NO_PDMINS_CHECKS */ Port = pRange->Core.KeyLast; } Port++; } /* * Remove any GC ranges first. */ int rc = VINF_SUCCESS; Port = PortStart; while (Port <= PortLast && Port >= PortStart) { /* * Try find range. */ PIOMIOPORTRANGEGC pRange = (PIOMIOPORTRANGEGC)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesHC->IOPortTreeGC, Port); if (pRange) { if ( pRange->Core.Key == Port && pRange->Core.KeyLast <= PortLast) { /* * Kick out the entire range. */ void *pv = RTAvlroIOPortRemove(&pVM->iom.s.pTreesHC->IOPortTreeGC, Port); Assert(pv == (void *)pRange); NOREF(pv); Port += pRange->cPorts; MMHyperFree(pVM, pRange); } else if (pRange->Core.Key == Port) { /* * Cut of the head of the range, done. */ pRange->cPorts -= Port - pRange->Port; pRange->Core.Key = Port; pRange->Port = Port; break; } else if (pRange->Core.KeyLast <= PortLast) { /* * Just cut of the tail. */ unsigned c = pRange->Core.KeyLast - Port + 1; pRange->Core.KeyLast -= c; pRange->cPorts -= c; Port += c; } else { /* * Split the range, done. */ Assert(pRange->Core.KeyLast > PortLast && pRange->Core.Key < Port); /* create tail. */ PIOMIOPORTRANGEGC pRangeNew; int rc = MMHyperAlloc(pVM, sizeof(*pRangeNew), 0, MM_TAG_IOM, (void **)&pRangeNew); if (VBOX_FAILURE(rc)) return rc; *pRangeNew = *pRange; pRangeNew->Core.Key = PortLast; pRangeNew->Port = PortLast; pRangeNew->cPorts = pRangeNew->Core.KeyLast - PortLast + 1; /* adjust head */ pRange->Core.KeyLast = Port - 1; pRange->cPorts = Port - pRange->Port; /* insert */ if (!RTAvlroIOPortInsert(&pVM->iom.s.pTreesHC->IOPortTreeGC, &pRangeNew->Core)) { AssertMsgFailed(("This cannot happen!\n")); MMHyperFree(pVM, pRangeNew); rc = VERR_INTERNAL_ERROR; } break; } } else /* next port */ Port++; } /* for all ports - GC. */ /* * Remove any R0 ranges first. */ rc = VINF_SUCCESS; Port = PortStart; while (Port <= PortLast && Port >= PortStart) { /* * Try find range. */ PIOMIOPORTRANGER0 pRange = (PIOMIOPORTRANGER0)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesHC->IOPortTreeR0, Port); if (pRange) { if ( pRange->Core.Key == Port && pRange->Core.KeyLast <= PortLast) { /* * Kick out the entire range. */ void *pv = RTAvlroIOPortRemove(&pVM->iom.s.pTreesHC->IOPortTreeR0, Port); Assert(pv == (void *)pRange); NOREF(pv); Port += pRange->cPorts; MMHyperFree(pVM, pRange); } else if (pRange->Core.Key == Port) { /* * Cut of the head of the range, done. */ pRange->cPorts -= Port - pRange->Port; pRange->Core.Key = Port; pRange->Port = Port; break; } else if (pRange->Core.KeyLast <= PortLast) { /* * Just cut of the tail. */ unsigned c = pRange->Core.KeyLast - Port + 1; pRange->Core.KeyLast -= c; pRange->cPorts -= c; Port += c; } else { /* * Split the range, done. */ Assert(pRange->Core.KeyLast > PortLast && pRange->Core.Key < Port); /* create tail. */ PIOMIOPORTRANGER0 pRangeNew; int rc = MMHyperAlloc(pVM, sizeof(*pRangeNew), 0, MM_TAG_IOM, (void **)&pRangeNew); if (VBOX_FAILURE(rc)) return rc; *pRangeNew = *pRange; pRangeNew->Core.Key = PortLast; pRangeNew->Port = PortLast; pRangeNew->cPorts = pRangeNew->Core.KeyLast - PortLast + 1; /* adjust head */ pRange->Core.KeyLast = Port - 1; pRange->cPorts = Port - pRange->Port; /* insert */ if (!RTAvlroIOPortInsert(&pVM->iom.s.pTreesHC->IOPortTreeR0, &pRangeNew->Core)) { AssertMsgFailed(("This cannot happen!\n")); MMHyperFree(pVM, pRangeNew); rc = VERR_INTERNAL_ERROR; } break; } } else /* next port */ Port++; } /* for all ports - R0. */ /* * And the same procedure for ring-3 ranges. */ Port = PortStart; while (Port <= PortLast && Port >= PortStart) { /* * Try find range. */ PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)RTAvlroIOPortRangeGet(&pVM->iom.s.pTreesHC->IOPortTreeR3, Port); if (pRange) { if ( pRange->Core.Key == Port && pRange->Core.KeyLast <= PortLast) { /* * Kick out the entire range. */ void *pv = RTAvlroIOPortRemove(&pVM->iom.s.pTreesHC->IOPortTreeR3, Port); Assert(pv == (void *)pRange); NOREF(pv); Port += pRange->cPorts; MMHyperFree(pVM, pRange); } else if (pRange->Core.Key == Port) { /* * Cut of the head of the range, done. */ pRange->cPorts -= Port - pRange->Port; pRange->Core.Key = Port; pRange->Port = Port; break; } else if (pRange->Core.KeyLast <= PortLast) { /* * Just cut of the tail. */ unsigned c = pRange->Core.KeyLast - Port + 1; pRange->Core.KeyLast -= c; pRange->cPorts -= c; Port += c; } else { /* * Split the range, done. */ Assert(pRange->Core.KeyLast > PortLast && pRange->Core.Key < Port); /* create tail. */ PIOMIOPORTRANGER3 pRangeNew; int rc = MMHyperAlloc(pVM, sizeof(*pRangeNew), 0, MM_TAG_IOM, (void **)&pRangeNew); if (VBOX_FAILURE(rc)) return rc; *pRangeNew = *pRange; pRangeNew->Core.Key = PortLast; pRangeNew->Port = PortLast; pRangeNew->cPorts = pRangeNew->Core.KeyLast - PortLast + 1; /* adjust head */ pRange->Core.KeyLast = Port - 1; pRange->cPorts = Port - pRange->Port; /* insert */ if (!RTAvlroIOPortInsert(&pVM->iom.s.pTreesHC->IOPortTreeR3, &pRangeNew->Core)) { AssertMsgFailed(("This cannot happen!\n")); MMHyperFree(pVM, pRangeNew); rc = VERR_INTERNAL_ERROR; } break; } } else /* next port */ Port++; } /* for all ports - ring-3. */ /* done */ return rc; } /** * Dummy Port I/O Handler for IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the IN operation. * @param pu32 Where to store the result. * @param cb Number of bytes read. */ static DECLCALLBACK(int) iomR3IOPortDummyIn(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t *pu32, unsigned cb) { switch (cb) { case 1: *pu32 = 0xff; break; case 2: *pu32 = 0xffff; break; case 4: *pu32 = 0xffffffff; break; default: AssertReleaseMsgFailed(("cb=%d\n", cb)); return VERR_INTERNAL_ERROR; } return VINF_SUCCESS; } /** * Dummy Port I/O Handler for string IN operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the string IN operation. * @param pGCPtrDst Pointer to the destination buffer (GC, incremented appropriately). * @param pcTransfer Pointer to the number of transfer units to read, on return remaining transfer units. * @param cb Size of the transfer unit (1, 2 or 4 bytes). */ static DECLCALLBACK(int) iomR3IOPortDummyInStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrDst, unsigned *pcTransfer, unsigned cb) { return VINF_SUCCESS; } /** * Dummy Port I/O Handler for OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the OUT operation. * @param u32 The value to output. * @param cb The value size in bytes. */ static DECLCALLBACK(int) iomR3IOPortDummyOut(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, uint32_t u32, unsigned cb) { return VINF_SUCCESS; } /** * Dummy Port I/O Handler for string OUT operations. * * @returns VBox status code. * * @param pDevIns The device instance. * @param pvUser User argument. * @param Port Port number used for the string OUT operation. * @param pGCPtrSrc Pointer to the source buffer (GC, incremented appropriately). * @param pcTransfer Pointer to the number of transfer units to write, on return remaining transfer units. * @param cb Size of the transfer unit (1, 2 or 4 bytes). */ static DECLCALLBACK(int) iomR3IOPortDummyOutStr(PPDMDEVINS pDevIns, void *pvUser, RTIOPORT Port, RTGCPTR *pGCPtrSrc, unsigned *pcTransfer, unsigned cb) { return VINF_SUCCESS; } /** * Display a single I/O port ring-3 range. * * @returns 0 * @param pNode Pointer to I/O port HC range. * @param pvUser Pointer to info output callback structure. */ static DECLCALLBACK(int) iomR3IOPortInfoOneR3(PAVLROIOPORTNODECORE pNode, void *pvUser) { PIOMIOPORTRANGER3 pRange = (PIOMIOPORTRANGER3)pNode; PCDBGFINFOHLP pHlp = (PCDBGFINFOHLP)pvUser; pHlp->pfnPrintf(pHlp, "%04x-%04x %VHv %VHv %VHv %VHv %s\n", pRange->Core.Key, pRange->Core.KeyLast, pRange->pDevIns, pRange->pfnInCallback, pRange->pfnOutCallback, pRange->pvUser, pRange->pszDesc); return 0; } /** * Display a single I/O port GC range. * * @returns 0 * @param pNode Pointer to IOPORT GC range. * @param pvUser Pointer to info output callback structure. */ static DECLCALLBACK(int) iomR3IOPortInfoOneGC(PAVLROIOPORTNODECORE pNode, void *pvUser) { PIOMIOPORTRANGEGC pRange = (PIOMIOPORTRANGEGC)pNode; PCDBGFINFOHLP pHlp = (PCDBGFINFOHLP)pvUser; pHlp->pfnPrintf(pHlp, "%04x-%04x %VGv %VGv %VGv %VGv %s\n", pRange->Core.Key, pRange->Core.KeyLast, pRange->pDevIns, pRange->pfnInCallback, pRange->pfnOutCallback, pRange->pvUser, pRange->pszDesc); return 0; } /** * Display all registered I/O port ranges. * * @param pVM VM Handle. * @param pHlp The info helpers. * @param pszArgs Arguments, ignored. */ static DECLCALLBACK(void) iomR3IOPortInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs) { NOREF(pszArgs); pHlp->pfnPrintf(pHlp, "I/O Port R3 ranges (pVM=%p)\n" "Range %.*s %.*s %.*s %.*s Description\n", pVM, sizeof(RTHCPTR) * 2, "pDevIns ", sizeof(RTHCPTR) * 2, "In ", sizeof(RTHCPTR) * 2, "Out ", sizeof(RTHCPTR) * 2, "pvUser "); RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesHC->IOPortTreeR3, true, iomR3IOPortInfoOneR3, (void *)pHlp); pHlp->pfnPrintf(pHlp, "I/O Port R0 ranges (pVM=%p)\n" "Range %.*s %.*s %.*s %.*s Description\n", pVM, sizeof(RTHCPTR) * 2, "pDevIns ", sizeof(RTHCPTR) * 2, "In ", sizeof(RTHCPTR) * 2, "Out ", sizeof(RTHCPTR) * 2, "pvUser "); RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesHC->IOPortTreeR0, true, iomR3IOPortInfoOneR3, (void *)pHlp); pHlp->pfnPrintf(pHlp, "I/O Port GC ranges (pVM=%p)\n" "Range %.*s %.*s %.*s %.*s Description\n", pVM, sizeof(RTGCPTR) * 2, "pDevIns ", sizeof(RTGCPTR) * 2, "In ", sizeof(RTGCPTR) * 2, "Out ", sizeof(RTGCPTR) * 2, "pvUser "); RTAvlroIOPortDoWithAll(&pVM->iom.s.pTreesHC->IOPortTreeGC, true, iomR3IOPortInfoOneGC, (void *)pHlp); if (pVM->iom.s.pRangeLastReadGC) { PIOMIOPORTRANGEGC pRange = (PIOMIOPORTRANGEGC)MMHyperGC2HC(pVM, pVM->iom.s.pRangeLastReadGC); pHlp->pfnPrintf(pHlp, "GC Read Ports: %#04x-%#04x %VGv %s\n", pRange->Port, pRange->Port + pRange->cPorts, pVM->iom.s.pRangeLastReadGC, pRange->pszDesc); } if (pVM->iom.s.pStatsLastReadGC) { PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperGC2HC(pVM, pVM->iom.s.pStatsLastReadGC); pHlp->pfnPrintf(pHlp, "GC Read Stats: %#04x %VGv\n", pRange->Core.Key, pVM->iom.s.pStatsLastReadGC); } if (pVM->iom.s.pRangeLastWriteGC) { PIOMIOPORTRANGEGC pRange = (PIOMIOPORTRANGEGC)MMHyperGC2HC(pVM, pVM->iom.s.pRangeLastWriteGC); pHlp->pfnPrintf(pHlp, "GC Write Ports: %#04x-%#04x %VGv %s\n", pRange->Port, pRange->Port + pRange->cPorts, pVM->iom.s.pRangeLastWriteGC, pRange->pszDesc); } if (pVM->iom.s.pStatsLastWriteGC) { PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperGC2HC(pVM, pVM->iom.s.pStatsLastWriteGC); pHlp->pfnPrintf(pHlp, "GC Write Stats: %#04x %VGv\n", pRange->Core.Key, pVM->iom.s.pStatsLastWriteGC); } if (pVM->iom.s.pRangeLastReadR3) { PIOMIOPORTRANGER3 pRange = pVM->iom.s.pRangeLastReadR3; pHlp->pfnPrintf(pHlp, "HC Read Ports: %#04x-%#04x %VGv %s\n", pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc); } if (pVM->iom.s.pStatsLastReadR3) { PIOMIOPORTSTATS pRange = pVM->iom.s.pStatsLastReadR3; pHlp->pfnPrintf(pHlp, "HC Read Stats: %#04x %VGv\n", pRange->Core.Key, pRange); } if (pVM->iom.s.pRangeLastWriteR3) { PIOMIOPORTRANGER3 pRange = pVM->iom.s.pRangeLastWriteR3; pHlp->pfnPrintf(pHlp, "HC Write Ports: %#04x-%#04x %VGv %s\n", pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc); } if (pVM->iom.s.pStatsLastWriteR3) { PIOMIOPORTSTATS pRange = pVM->iom.s.pStatsLastWriteR3; pHlp->pfnPrintf(pHlp, "HC Write Stats: %#04x %VGv\n", pRange->Core.Key, pRange); } if (pVM->iom.s.pRangeLastReadR0) { PIOMIOPORTRANGER0 pRange = (PIOMIOPORTRANGER0)MMHyperR0ToCC(pVM, pVM->iom.s.pRangeLastReadR0); pHlp->pfnPrintf(pHlp, "R0 Read Ports: %#04x-%#04x %VGv %s\n", pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc); } if (pVM->iom.s.pStatsLastReadR0) { PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperR0ToCC(pVM, pVM->iom.s.pStatsLastReadR0); pHlp->pfnPrintf(pHlp, "R0 Read Stats: %#04x %VGv\n", pRange->Core.Key, pRange); } if (pVM->iom.s.pRangeLastWriteR0) { PIOMIOPORTRANGER0 pRange = (PIOMIOPORTRANGER0)MMHyperR0ToCC(pVM, pVM->iom.s.pRangeLastWriteR0); pHlp->pfnPrintf(pHlp, "R0 Write Ports: %#04x-%#04x %VGv %s\n", pRange->Port, pRange->Port + pRange->cPorts, pRange, pRange->pszDesc); } if (pVM->iom.s.pStatsLastWriteR0) { PIOMIOPORTSTATS pRange = (PIOMIOPORTSTATS)MMHyperR0ToCC(pVM, pVM->iom.s.pStatsLastWriteR0); pHlp->pfnPrintf(pHlp, "R0 Write Stats: %#04x %VGv\n", pRange->Core.Key, pRange); } } /** * Registers a Memory Mapped I/O R3 handler. * * This API is called by PDM on behalf of a device. Devices must register ring-3 ranges * before any GC and R0 ranges can be registered using IOMR3MMIORegisterGC() and IOMR3MMIORegisterR0(). * * @returns VBox status code. * * @param pVM VM handle. * @param pDevIns PDM device instance owning the MMIO range. * @param GCPhysStart First physical address in the range. * @param cbRange The size of the range (in bytes). * @param pvUser User argument for the callbacks. * @param pfnWriteCallback Pointer to function which is gonna handle Write operations. * @param pfnReadCallback Pointer to function which is gonna handle Read operations. * @param pfnFillCallback Pointer to function which is gonna handle Fill/memset operations. * @param pszDesc Pointer to description string. This must not be freed. */ IOMR3DECL(int) IOMR3MMIORegisterR3(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTHCPTR pvUser, R3PTRTYPE(PFNIOMMMIOWRITE) pfnWriteCallback, R3PTRTYPE(PFNIOMMMIOREAD) pfnReadCallback, R3PTRTYPE(PFNIOMMMIOFILL) pfnFillCallback, const char *pszDesc) { LogFlow(("IOMR3MMIORegisterR3: pDevIns=%p GCPhysStart=%VGp cbRange=%#x pvUser=%VHv pfnWriteCallback=%#x pfnReadCallback=%#x pfnFillCallback=%#x pszDesc=%s\n", pDevIns, GCPhysStart, cbRange, pvUser, pfnWriteCallback, pfnReadCallback, pfnFillCallback, pszDesc)); int rc; /* * Validate input. */ if (GCPhysStart + (cbRange - 1) < GCPhysStart) { AssertMsgFailed(("Wrapped! %VGp %#x bytes\n", GCPhysStart, cbRange)); return VERR_IOM_INVALID_MMIO_RANGE; } /* * Resolve the GC/R0 handler addresses lazily because of init order. */ if (pVM->iom.s.pfnMMIOHandlerR0 == NIL_RTR0PTR) { rc = PDMR3GetSymbolGCLazy(pVM, NULL, "IOMMMIOHandler", &pVM->iom.s.pfnMMIOHandlerGC); AssertLogRelRCReturn(rc, rc); rc = PDMR3GetSymbolR0Lazy(pVM, NULL, "IOMMMIOHandler", &pVM->iom.s.pfnMMIOHandlerR0); AssertLogRelRCReturn(rc, rc); } /* * Allocate new range record and initialize it. */ PIOMMMIORANGE pRange; rc = MMHyperAlloc(pVM, sizeof(*pRange), 0, MM_TAG_IOM, (void **)&pRange); if (VBOX_SUCCESS(rc)) { pRange->Core.Key = GCPhysStart; pRange->Core.KeyLast = GCPhysStart + (cbRange - 1); pRange->GCPhys = GCPhysStart; pRange->cb = cbRange; pRange->pszDesc = pszDesc; pRange->pvUserR3 = pvUser; pRange->pDevInsR3 = pDevIns; pRange->pfnReadCallbackR3 = pfnReadCallback; pRange->pfnWriteCallbackR3 = pfnWriteCallback; pRange->pfnFillCallbackR3 = pfnFillCallback; //pRange->pvUserR0 = NIL_RTR0PTR; //pRange->pDevInsR0 = NIL_RTR0PTR; //pRange->pfnReadCallbackR0 = NIL_RTR0PTR; //pRange->pfnWriteCallbackR0 = NIL_RTR0PTR; //pRange->pfnFillCallbackR0 = NIL_RTR0PTR; //pRange->pvUserGC = NIL_RTGCPTR; //pRange->pDevInsGC = NIL_RTGCPTR; //pRange->pfnReadCallbackGC = NIL_RTGCPTR; //pRange->pfnWriteCallbackGC = NIL_RTGCPTR; //pRange->pfnFillCallbackGC = NIL_RTGCPTR; /* * Try register it with PGM and then insert it into the tree. */ rc = PGMR3PhysMMIORegister(pVM, GCPhysStart, cbRange, /*IOMR3MMIOHandler*/ NULL, pRange, pVM->iom.s.pfnMMIOHandlerR0, MMHyperR3ToR0(pVM, pRange), pVM->iom.s.pfnMMIOHandlerGC, MMHyperR3ToGC(pVM, pRange), pszDesc); if (RT_SUCCESS(rc)) { if (RTAvlroGCPhysInsert(&pVM->iom.s.pTreesHC->MMIOTree, &pRange->Core)) return VINF_SUCCESS; DBGFR3Info(pVM, "mmio", NULL, NULL); AssertMsgFailed(("This cannot happen!\n")); rc = VERR_INTERNAL_ERROR; } MMHyperFree(pVM, pRange); } return rc; } /** * Registers a Memory Mapped I/O GC handler range. * * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges * using IOMMMIORegisterR3() before calling this function. * * * @returns VBox status code. * * @param pVM VM handle. * @param pDevIns PDM device instance owning the MMIO range. * @param GCPhysStart First physical address in the range. * @param cbRange The size of the range (in bytes). * @param pvUser User argument for the callbacks. * @param pfnWriteCallback Pointer to function which is gonna handle Write operations. * @param pfnReadCallback Pointer to function which is gonna handle Read operations. * @param pfnFillCallback Pointer to function which is gonna handle Fill/memset operations. */ IOMR3DECL(int) IOMR3MMIORegisterGC(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTGCPTR pvUser, GCPTRTYPE(PFNIOMMMIOWRITE) pfnWriteCallback, GCPTRTYPE(PFNIOMMMIOREAD) pfnReadCallback, GCPTRTYPE(PFNIOMMMIOFILL) pfnFillCallback) { LogFlow(("IOMR3MMIORegisterGC: pDevIns=%p GCPhysStart=%VGp cbRange=%#x pvUser=%VGv pfnWriteCallback=%#x pfnReadCallback=%#x pfnFillCallback=%#x\n", pDevIns, GCPhysStart, cbRange, pvUser, pfnWriteCallback, pfnReadCallback, pfnFillCallback)); /* * Validate input. */ if (!pfnWriteCallback && !pfnReadCallback) { AssertMsgFailed(("No callbacks! %VGp LB%#x %s\n", GCPhysStart, cbRange)); return VERR_INVALID_PARAMETER; } /* * Find the MMIO range and check that the input matches. */ PIOMMMIORANGE pRange = iomMMIOGetRange(&pVM->iom.s, GCPhysStart); AssertReturn(pRange, VERR_IOM_MMIO_RANGE_NOT_FOUND); AssertReturn(pRange->pDevInsR3 == pDevIns, VERR_IOM_NOT_MMIO_RANGE_OWNER); AssertReturn(pRange->GCPhys == GCPhysStart, VERR_IOM_INVALID_MMIO_RANGE); AssertReturn(pRange->cb == cbRange, VERR_IOM_INVALID_MMIO_RANGE); pRange->pvUserGC = pvUser; pRange->pfnReadCallbackGC = pfnReadCallback; pRange->pfnWriteCallbackGC= pfnWriteCallback; pRange->pfnFillCallbackGC = pfnFillCallback; pRange->pDevInsGC = MMHyperCCToGC(pVM, pDevIns); return VINF_SUCCESS; } /** * Registers a Memory Mapped I/O R0 handler range. * * This API is called by PDM on behalf of a device. Devices must first register ring-3 ranges * using IOMMR3MIORegisterHC() before calling this function. * * * @returns VBox status code. * * @param pVM VM handle. * @param pDevIns PDM device instance owning the MMIO range. * @param GCPhysStart First physical address in the range. * @param cbRange The size of the range (in bytes). * @param pvUser User argument for the callbacks. * @param pfnWriteCallback Pointer to function which is gonna handle Write operations. * @param pfnReadCallback Pointer to function which is gonna handle Read operations. * @param pfnFillCallback Pointer to function which is gonna handle Fill/memset operations. */ IOMR3DECL(int) IOMR3MMIORegisterR0(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange, RTR0PTR pvUser, R0PTRTYPE(PFNIOMMMIOWRITE) pfnWriteCallback, R0PTRTYPE(PFNIOMMMIOREAD) pfnReadCallback, R0PTRTYPE(PFNIOMMMIOFILL) pfnFillCallback) { LogFlow(("IOMR3MMIORegisterR0: pDevIns=%p GCPhysStart=%VGp cbRange=%#x pvUser=%VHv pfnWriteCallback=%#x pfnReadCallback=%#x pfnFillCallback=%#x\n", pDevIns, GCPhysStart, cbRange, pvUser, pfnWriteCallback, pfnReadCallback, pfnFillCallback)); /* * Validate input. */ if (!pfnWriteCallback && !pfnReadCallback) { AssertMsgFailed(("No callbacks! %VGp LB%#x %s\n", GCPhysStart, cbRange)); return VERR_INVALID_PARAMETER; } /* * Find the MMIO range and check that the input matches. */ PIOMMMIORANGE pRange = iomMMIOGetRange(&pVM->iom.s, GCPhysStart); AssertReturn(pRange, VERR_IOM_MMIO_RANGE_NOT_FOUND); AssertReturn(pRange->pDevInsR3 == pDevIns, VERR_IOM_NOT_MMIO_RANGE_OWNER); AssertReturn(pRange->GCPhys == GCPhysStart, VERR_IOM_INVALID_MMIO_RANGE); AssertReturn(pRange->cb == cbRange, VERR_IOM_INVALID_MMIO_RANGE); pRange->pvUserR0 = pvUser; pRange->pfnReadCallbackR0 = pfnReadCallback; pRange->pfnWriteCallbackR0= pfnWriteCallback; pRange->pfnFillCallbackR0 = pfnFillCallback; pRange->pDevInsR0 = MMHyperCCToR0(pVM, pDevIns); return VINF_SUCCESS; } /** * Deregisters a Memory Mapped I/O handler range. * * Registered GC, R0, and R3 ranges are affected. * * @returns VBox status code. * * @param pVM The virtual machine. * @param pDevIns Device instance which the MMIO region is registered. * @param GCPhysStart First physical address (GC) in the range. * @param cbRange Number of bytes to deregister. * * @remark This function mainly for PCI PnP Config and will not do * all the checks you might expect it to do. */ IOMR3DECL(int) IOMR3MMIODeregister(PVM pVM, PPDMDEVINS pDevIns, RTGCPHYS GCPhysStart, RTUINT cbRange) { LogFlow(("IOMR3MMIODeregister: pDevIns=%p GCPhysStart=%VGp cbRange=%#x\n", pDevIns, GCPhysStart, cbRange)); /* * Validate input. */ RTGCPHYS GCPhysLast = GCPhysStart + (cbRange - 1); if (GCPhysLast < GCPhysStart) { AssertMsgFailed(("Wrapped! %#x LB%#x\n", GCPhysStart, cbRange)); return VERR_IOM_INVALID_MMIO_RANGE; } /* * Check ownership and such for the entire area. */ RTGCPHYS GCPhys = GCPhysStart; while (GCPhys <= GCPhysLast && GCPhys >= GCPhysStart) { PIOMMMIORANGE pRange = iomMMIOGetRange(&pVM->iom.s, GCPhys); if (!pRange) return VERR_IOM_MMIO_RANGE_NOT_FOUND; AssertMsgReturn(pRange->pDevInsR3 == pDevIns, ("Not owner! GCPhys=%VGp %VGp LB%#x %s\n", GCPhys, GCPhysStart, cbRange, pRange->pszDesc), VERR_IOM_NOT_MMIO_RANGE_OWNER); AssertMsgReturn(pRange->Core.KeyLast <= GCPhysLast, ("Incomplete R3 range! GCPhys=%VGp %VGp LB%#x %s\n", GCPhys, GCPhysStart, cbRange, pRange->pszDesc), VERR_IOM_INCOMPLETE_MMIO_RANGE); /* next */ Assert(GCPhys <= pRange->Core.KeyLast); GCPhys = pRange->Core.KeyLast + 1; } /* * Do the actual removing of the MMIO ranges. */ GCPhys = GCPhysStart; while (GCPhys <= GCPhysLast && GCPhys >= GCPhysStart) { PIOMMMIORANGE pRange = (PIOMMMIORANGE)RTAvlroGCPhysRemove(&pVM->iom.s.pTreesHC->MMIOTree, GCPhys); Assert(pRange); Assert(pRange->Core.Key == GCPhys && pRange->Core.KeyLast <= GCPhysLast); /* remove it from PGM */ int rc = PGMR3PhysMMIODeregister(pVM, GCPhys, pRange->cb); AssertRC(rc); /* advance and free. */ GCPhys = pRange->Core.KeyLast + 1; MMHyperFree(pVM, pRange); } iomR3FlushCache(pVM); return VINF_SUCCESS; } /** * Display a single MMIO range. * * @returns 0 * @param pNode Pointer to MMIO R3 range. * @param pvUser Pointer to info output callback structure. */ static DECLCALLBACK(int) iomR3MMIOInfoOne(PAVLROGCPHYSNODECORE pNode, void *pvUser) { PIOMMMIORANGE pRange = (PIOMMMIORANGE)pNode; PCDBGFINFOHLP pHlp = (PCDBGFINFOHLP)pvUser; pHlp->pfnPrintf(pHlp, "%VGp-%VGp %VHv %VHv %VHv %VHv %VHv %s\n", pRange->Core.Key, pRange->Core.KeyLast, pRange->pDevInsR3, pRange->pfnReadCallbackR3, pRange->pfnWriteCallbackR3, pRange->pfnFillCallbackR3, pRange->pvUserR3, pRange->pszDesc); pHlp->pfnPrintf(pHlp, "%*s %VHv %VHv %VHv %VHv %VHv\n", sizeof(RTGCPHYS) * 2 * 2 + 1, "R0", pRange->pDevInsR0, pRange->pfnReadCallbackR0, pRange->pfnWriteCallbackR0, pRange->pfnFillCallbackR0, pRange->pvUserR0); pHlp->pfnPrintf(pHlp, "%*s %VGv %VGv %VGv %VGv %VGv\n", sizeof(RTGCPHYS) * 2 * 2 + 1, "GC", pRange->pDevInsGC, pRange->pfnReadCallbackGC, pRange->pfnWriteCallbackGC, pRange->pfnFillCallbackGC, pRange->pvUserGC); return 0; } /** * Display registered MMIO ranges to the log. * * @param pVM VM Handle. * @param pHlp The info helpers. * @param pszArgs Arguments, ignored. */ static DECLCALLBACK(void) iomR3MMIOInfo(PVM pVM, PCDBGFINFOHLP pHlp, const char *pszArgs) { NOREF(pszArgs); pHlp->pfnPrintf(pHlp, "MMIO ranges (pVM=%p)\n" "%.*s %.*s %.*s %.*s %.*s %.*s %s\n", pVM, sizeof(RTGCPHYS) * 4 + 1, "GC Phys Range ", sizeof(RTHCPTR) * 2, "pDevIns ", sizeof(RTHCPTR) * 2, "Read ", sizeof(RTHCPTR) * 2, "Write ", sizeof(RTHCPTR) * 2, "Fill ", sizeof(RTHCPTR) * 2, "pvUser ", "Description"); RTAvlroGCPhysDoWithAll(&pVM->iom.s.pTreesHC->MMIOTree, true, iomR3MMIOInfoOne, (void *)pHlp); } #ifdef VBOX_WITH_STATISTICS /** * Tries to come up with the standard name for a port. * * @returns Pointer to readonly string if known. * @returns NULL if unknown port number. * * @param Port The port to name. */ static const char *iomr3IOPortGetStandardName(RTIOPORT Port) { switch (Port) { case 0x00: case 0x10: case 0x20: case 0x30: case 0x40: case 0x50: case 0x70: case 0x01: case 0x11: case 0x21: case 0x31: case 0x41: case 0x51: case 0x61: case 0x71: case 0x02: case 0x12: case 0x22: case 0x32: case 0x42: case 0x52: case 0x62: case 0x72: case 0x03: case 0x13: case 0x23: case 0x33: case 0x43: case 0x53: case 0x63: case 0x73: case 0x04: case 0x14: case 0x24: case 0x34: case 0x44: case 0x54: case 0x74: case 0x05: case 0x15: case 0x25: case 0x35: case 0x45: case 0x55: case 0x65: case 0x75: case 0x06: case 0x16: case 0x26: case 0x36: case 0x46: case 0x56: case 0x66: case 0x76: case 0x07: case 0x17: case 0x27: case 0x37: case 0x47: case 0x57: case 0x67: case 0x77: case 0x08: case 0x18: case 0x28: case 0x38: case 0x48: case 0x58: case 0x68: case 0x78: case 0x09: case 0x19: case 0x29: case 0x39: case 0x49: case 0x59: case 0x69: case 0x79: case 0x0a: case 0x1a: case 0x2a: case 0x3a: case 0x4a: case 0x5a: case 0x6a: case 0x7a: case 0x0b: case 0x1b: case 0x2b: case 0x3b: case 0x4b: case 0x5b: case 0x6b: case 0x7b: case 0x0c: case 0x1c: case 0x2c: case 0x3c: case 0x4c: case 0x5c: case 0x6c: case 0x7c: case 0x0d: case 0x1d: case 0x2d: case 0x3d: case 0x4d: case 0x5d: case 0x6d: case 0x7d: case 0x0e: case 0x1e: case 0x2e: case 0x3e: case 0x4e: case 0x5e: case 0x6e: case 0x7e: case 0x0f: case 0x1f: case 0x2f: case 0x3f: case 0x4f: case 0x5f: case 0x6f: case 0x7f: case 0x80: case 0x90: case 0xa0: case 0xb0: case 0xc0: case 0xd0: case 0xe0: case 0xf0: case 0x81: case 0x91: case 0xa1: case 0xb1: case 0xc1: case 0xd1: case 0xe1: case 0xf1: case 0x82: case 0x92: case 0xa2: case 0xb2: case 0xc2: case 0xd2: case 0xe2: case 0xf2: case 0x83: case 0x93: case 0xa3: case 0xb3: case 0xc3: case 0xd3: case 0xe3: case 0xf3: case 0x84: case 0x94: case 0xa4: case 0xb4: case 0xc4: case 0xd4: case 0xe4: case 0xf4: case 0x85: case 0x95: case 0xa5: case 0xb5: case 0xc5: case 0xd5: case 0xe5: case 0xf5: case 0x86: case 0x96: case 0xa6: case 0xb6: case 0xc6: case 0xd6: case 0xe6: case 0xf6: case 0x87: case 0x97: case 0xa7: case 0xb7: case 0xc7: case 0xd7: case 0xe7: case 0xf7: case 0x88: case 0x98: case 0xa8: case 0xb8: case 0xc8: case 0xd8: case 0xe8: case 0xf8: case 0x89: case 0x99: case 0xa9: case 0xb9: case 0xc9: case 0xd9: case 0xe9: case 0xf9: case 0x8a: case 0x9a: case 0xaa: case 0xba: case 0xca: case 0xda: case 0xea: case 0xfa: case 0x8b: case 0x9b: case 0xab: case 0xbb: case 0xcb: case 0xdb: case 0xeb: case 0xfb: case 0x8c: case 0x9c: case 0xac: case 0xbc: case 0xcc: case 0xdc: case 0xec: case 0xfc: case 0x8d: case 0x9d: case 0xad: case 0xbd: case 0xcd: case 0xdd: case 0xed: case 0xfd: case 0x8e: case 0x9e: case 0xae: case 0xbe: case 0xce: case 0xde: case 0xee: case 0xfe: case 0x8f: case 0x9f: case 0xaf: case 0xbf: case 0xcf: case 0xdf: case 0xef: case 0xff: return "System Reserved"; case 0x60: case 0x64: return "Keyboard & Mouse"; case 0x378: case 0x379: case 0x37a: case 0x37b: case 0x37c: case 0x37d: case 0x37e: case 0x37f: case 0x3bc: case 0x3bd: case 0x3be: case 0x3bf: case 0x278: case 0x279: case 0x27a: case 0x27b: case 0x27c: case 0x27d: case 0x27e: case 0x27f: return "LPT1/2/3"; case 0x3f8: case 0x3f9: case 0x3fa: case 0x3fb: case 0x3fc: case 0x3fd: case 0x3fe: case 0x3ff: return "COM1"; case 0x2f8: case 0x2f9: case 0x2fa: case 0x2fb: case 0x2fc: case 0x2fd: case 0x2fe: case 0x2ff: return "COM2"; case 0x3e8: case 0x3e9: case 0x3ea: case 0x3eb: case 0x3ec: case 0x3ed: case 0x3ee: case 0x3ef: return "COM3"; case 0x2e8: case 0x2e9: case 0x2ea: case 0x2eb: case 0x2ec: case 0x2ed: case 0x2ee: case 0x2ef: return "COM4"; case 0x200: case 0x201: case 0x202: case 0x203: case 0x204: case 0x205: case 0x206: case 0x207: return "Joystick"; case 0x3f0: case 0x3f1: case 0x3f2: case 0x3f3: case 0x3f4: case 0x3f5: case 0x3f6: case 0x3f7: return "Floppy"; case 0x1f0: case 0x1f1: case 0x1f2: case 0x1f3: case 0x1f4: case 0x1f5: case 0x1f6: case 0x1f7: //case 0x3f6: //case 0x3f7: return "IDE 1st"; case 0x170: case 0x171: case 0x172: case 0x173: case 0x174: case 0x175: case 0x176: case 0x177: case 0x376: case 0x377: return "IDE 2nd"; case 0x1e0: case 0x1e1: case 0x1e2: case 0x1e3: case 0x1e4: case 0x1e5: case 0x1e6: case 0x1e7: case 0x3e6: case 0x3e7: return "IDE 3rd"; case 0x160: case 0x161: case 0x162: case 0x163: case 0x164: case 0x165: case 0x166: case 0x167: case 0x366: case 0x367: return "IDE 4th"; case 0x130: case 0x140: case 0x150: case 0x131: case 0x141: case 0x151: case 0x132: case 0x142: case 0x152: case 0x133: case 0x143: case 0x153: case 0x134: case 0x144: case 0x154: case 0x135: case 0x145: case 0x155: case 0x136: case 0x146: case 0x156: case 0x137: case 0x147: case 0x157: case 0x138: case 0x148: case 0x158: case 0x139: case 0x149: case 0x159: case 0x13a: case 0x14a: case 0x15a: case 0x13b: case 0x14b: case 0x15b: case 0x13c: case 0x14c: case 0x15c: case 0x13d: case 0x14d: case 0x15d: case 0x13e: case 0x14e: case 0x15e: case 0x13f: case 0x14f: case 0x15f: case 0x220: case 0x230: case 0x221: case 0x231: case 0x222: case 0x232: case 0x223: case 0x233: case 0x224: case 0x234: case 0x225: case 0x235: case 0x226: case 0x236: case 0x227: case 0x237: case 0x228: case 0x238: case 0x229: case 0x239: case 0x22a: case 0x23a: case 0x22b: case 0x23b: case 0x22c: case 0x23c: case 0x22d: case 0x23d: case 0x22e: case 0x23e: case 0x22f: case 0x23f: case 0x330: case 0x340: case 0x350: case 0x331: case 0x341: case 0x351: case 0x332: case 0x342: case 0x352: case 0x333: case 0x343: case 0x353: case 0x334: case 0x344: case 0x354: case 0x335: case 0x345: case 0x355: case 0x336: case 0x346: case 0x356: case 0x337: case 0x347: case 0x357: case 0x338: case 0x348: case 0x358: case 0x339: case 0x349: case 0x359: case 0x33a: case 0x34a: case 0x35a: case 0x33b: case 0x34b: case 0x35b: case 0x33c: case 0x34c: case 0x35c: case 0x33d: case 0x34d: case 0x35d: case 0x33e: case 0x34e: case 0x35e: case 0x33f: case 0x34f: case 0x35f: return "SCSI (typically)"; case 0x320: case 0x321: case 0x322: case 0x323: case 0x324: case 0x325: case 0x326: case 0x327: return "XT HD"; case 0x3b0: case 0x3b1: case 0x3b2: case 0x3b3: case 0x3b4: case 0x3b5: case 0x3b6: case 0x3b7: case 0x3b8: case 0x3b9: case 0x3ba: case 0x3bb: return "VGA"; case 0x3c0: case 0x3d0: case 0x3c1: case 0x3d1: case 0x3c2: case 0x3d2: case 0x3c3: case 0x3d3: case 0x3c4: case 0x3d4: case 0x3c5: case 0x3d5: case 0x3c6: case 0x3d6: case 0x3c7: case 0x3d7: case 0x3c8: case 0x3d8: case 0x3c9: case 0x3d9: case 0x3ca: case 0x3da: case 0x3cb: case 0x3db: case 0x3cc: case 0x3dc: case 0x3cd: case 0x3dd: case 0x3ce: case 0x3de: case 0x3cf: case 0x3df: return "VGA/EGA"; case 0x240: case 0x260: case 0x280: case 0x241: case 0x261: case 0x281: case 0x242: case 0x262: case 0x282: case 0x243: case 0x263: case 0x283: case 0x244: case 0x264: case 0x284: case 0x245: case 0x265: case 0x285: case 0x246: case 0x266: case 0x286: case 0x247: case 0x267: case 0x287: case 0x248: case 0x268: case 0x288: case 0x249: case 0x269: case 0x289: case 0x24a: case 0x26a: case 0x28a: case 0x24b: case 0x26b: case 0x28b: case 0x24c: case 0x26c: case 0x28c: case 0x24d: case 0x26d: case 0x28d: case 0x24e: case 0x26e: case 0x28e: case 0x24f: case 0x26f: case 0x28f: case 0x300: case 0x301: case 0x388: case 0x389: case 0x38a: case 0x38b: return "Sound Card (typically)"; default: return NULL; } } #endif /* VBOX_WITH_STATISTICS */