VirtualBox

source: vbox/trunk/src/VBox/VMM/PDM.cpp@ 11945

Last change on this file since 11945 was 11792, checked in by vboxsync, 16 years ago

Assert when the SSM version doesn't match.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
File size: 39.9 KB
Line 
1/* $Id: PDM.cpp 11792 2008-08-29 08:51:20Z vboxsync $ */
2/** @file
3 * PDM - Pluggable Device Manager.
4 */
5
6/*
7 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 *
17 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
18 * Clara, CA 95054 USA or visit http://www.sun.com if you need
19 * additional information or have any questions.
20 */
21
22
23/** @page pg_pdm PDM - The Pluggable Device Manager
24 *
25 * VBox is designed to be very configurable, i.e. the ability to select
26 * virtual devices and configure them uniquely for a VM. For this reason
27 * virtual devices are not statically linked with the VMM but loaded and
28 * linked at runtime thru the Configuration Manager (CFGM). PDM will use
29 * CFGM to enumerate devices which needs loading and instantiation.
30 *
31 *
32 * @section sec_pdm_dev The Pluggable Device
33 *
34 * Devices register themselves when the module containing them is loaded.
35 * PDM will call an entry point 'VBoxDevicesRegister' when loading a device
36 * module. The device module will then use the supplied callback table to
37 * check the VMM version and to register its devices. Each device have an
38 * unique (for the configured VM) name (string). The name is not only used
39 * in PDM but in CFGM - to organize device and device instance settings - and
40 * by anyone who wants to do ioctls to the device.
41 *
42 * When all device modules have been successfully loaded PDM will instantiate
43 * those devices which are configured for the VM. Mark that this might mean
44 * creating several instances of some devices. When instantiating a device
45 * PDM provides device instance memory and a callback table with the VM APIs
46 * which the device instance is trusted with.
47 *
48 * Some devices are trusted devices, most are not. The trusted devices are
49 * an integrated part of the VM and can obtain the VM handle from their
50 * device instance handles, thus enabling them to call any VM api. Untrusted
51 * devices are can only use the callbacks provided during device
52 * instantiation.
53 *
54 * The guest context extention (optional) of a device is initialized as part
55 * of the GC init. A device marks in it's registration structure that it have
56 * a GC part, in which module and which name the entry point have. PDM will
57 * use its loader facilities to load this module into GC and to find the
58 * specified entry point.
59 *
60 * When writing a GC extention the programmer must keep in mind that this
61 * code will be relocated, so that using global/static pointer variables
62 * won't work.
63 *
64 *
65 * @section sec_pdm_drv The Pluggable Drivers
66 *
67 * The VM devices are often accessing host hardware or OS facilities. For
68 * most devices these facilities can be abstracted in one or more levels.
69 * These abstractions are called drivers.
70 *
71 * For instance take a DVD/CD drive. This can be connected to a SCSI
72 * controller, EIDE controller or SATA controller. The basics of the
73 * DVD/CD drive implementation remains the same - eject, insert,
74 * read, seek, and such. (For the scsi case, you might wanna speak SCSI
75 * directly to, but that can of course be fixed.) So, it makes much sense to
76 * have a generic CD/DVD driver which implements this.
77 *
78 * Then the media 'inserted' into the DVD/CD drive can be a ISO image, or
79 * it can be read from a real CD or DVD drive (there are probably other
80 * custom formats someone could desire to read or construct too). So, it
81 * would make sense to have abstracted interfaces for dealing with this
82 * in a generic way so the cdrom unit doesn't have to implement it all.
83 * Thus we have created the CDROM/DVD media driver family.
84 *
85 * So, for this example the IDE controller #1 (i.e. secondary) will have
86 * the DVD/CD Driver attached to it's LUN #0 (master). When a media is mounted
87 * the DVD/CD Driver will have a ISO, NativeCD, NativeDVD or RAW (media) Driver
88 * attached.
89 *
90 * It is possible to configure many levels of drivers inserting filters, loggers,
91 * or whatever you desire into the chain.
92 *
93 *
94 * @subsection sec_pdm_drv_interfaces Interfaces
95 *
96 * The pluggable drivers exposes one standard interface (callback table) which
97 * is used to construct, destruct, attach, detach, and query other interfaces.
98 * A device will query the interfaces required for it's operation during init
99 * and hotplug. PDM will query some interfaces during runtime mounting too.
100 *
101 * ... list interfaces ...
102 *
103 */
104
105
106/*******************************************************************************
107* Header Files *
108*******************************************************************************/
109#define LOG_GROUP LOG_GROUP_PDM
110#include "PDMInternal.h"
111#include <VBox/pdm.h>
112#include <VBox/mm.h>
113#include <VBox/pgm.h>
114#include <VBox/ssm.h>
115#include <VBox/vm.h>
116#include <VBox/uvm.h>
117#include <VBox/vmm.h>
118#include <VBox/param.h>
119#include <VBox/err.h>
120#include <VBox/sup.h>
121
122#include <VBox/log.h>
123#include <iprt/asm.h>
124#include <iprt/assert.h>
125#include <iprt/alloc.h>
126#include <iprt/ldr.h>
127#include <iprt/path.h>
128#include <iprt/string.h>
129
130
131/*******************************************************************************
132* Defined Constants And Macros *
133*******************************************************************************/
134/** The PDM saved state version. */
135#define PDM_SAVED_STATE_VERSION 3
136
137
138/*******************************************************************************
139* Internal Functions *
140*******************************************************************************/
141static DECLCALLBACK(int) pdmR3Save(PVM pVM, PSSMHANDLE pSSM);
142static DECLCALLBACK(int) pdmR3Load(PVM pVM, PSSMHANDLE pSSM, uint32_t u32Version);
143static DECLCALLBACK(int) pdmR3LoadPrep(PVM pVM, PSSMHANDLE pSSM);
144static DECLCALLBACK(void) pdmR3PollerTimer(PVM pVM, PTMTIMER pTimer, void *pvUser);
145
146
147
148/**
149 * Initializes the PDM part of the UVM.
150 *
151 * This doesn't really do much right now but has to be here for the sake
152 * of completeness.
153 *
154 * @returns VBox status code.
155 * @param pUVM Pointer to the user mode VM structure.
156 */
157PDMR3DECL(int) PDMR3InitUVM(PUVM pUVM)
158{
159 AssertCompile(sizeof(pUVM->pdm.s) <= sizeof(pUVM->pdm.padding));
160 AssertRelease(sizeof(pUVM->pdm.s) <= sizeof(pUVM->pdm.padding));
161 pUVM->pdm.s.pModules = NULL;
162 return VINF_SUCCESS;
163}
164
165
166/**
167 * Initializes the PDM.
168 *
169 * @returns VBox status code.
170 * @param pVM The VM to operate on.
171 */
172PDMR3DECL(int) PDMR3Init(PVM pVM)
173{
174 LogFlow(("PDMR3Init\n"));
175
176 /*
177 * Assert alignment and sizes.
178 */
179 AssertRelease(!(RT_OFFSETOF(VM, pdm.s) & 31));
180 AssertRelease(sizeof(pVM->pdm.s) <= sizeof(pVM->pdm.padding));
181
182 /*
183 * Init the structure.
184 */
185 pVM->pdm.s.offVM = RT_OFFSETOF(VM, pdm.s);
186
187 int rc = TMR3TimerCreateInternal(pVM, TMCLOCK_VIRTUAL, pdmR3PollerTimer, NULL, "PDM Poller", &pVM->pdm.s.pTimerPollers);
188 AssertRC(rc);
189
190 /*
191 * Initialize sub compontents.
192 */
193 rc = pdmR3CritSectInit(pVM);
194 if (VBOX_SUCCESS(rc))
195 {
196 rc = PDMR3CritSectInit(pVM, &pVM->pdm.s.CritSect, "PDM");
197 if (VBOX_SUCCESS(rc))
198 rc = pdmR3LdrInitU(pVM->pUVM);
199 if (VBOX_SUCCESS(rc))
200 {
201 rc = pdmR3DrvInit(pVM);
202 if (VBOX_SUCCESS(rc))
203 {
204 rc = pdmR3DevInit(pVM);
205 if (VBOX_SUCCESS(rc))
206 {
207#ifdef VBOX_WITH_PDM_ASYNC_COMPLETION
208 rc = pdmR3AsyncCompletionInit(pVM);
209 if (VBOX_SUCCESS(rc))
210#endif
211 {
212 /*
213 * Register the saved state data unit.
214 */
215 rc = SSMR3RegisterInternal(pVM, "pdm", 1, PDM_SAVED_STATE_VERSION, 128,
216 NULL, pdmR3Save, NULL,
217 pdmR3LoadPrep, pdmR3Load, NULL);
218 if (VBOX_SUCCESS(rc))
219 {
220 LogFlow(("PDM: Successfully initialized\n"));
221 return rc;
222 }
223
224 }
225 }
226 }
227 }
228 }
229
230 /*
231 * Cleanup and return failure.
232 */
233 PDMR3Term(pVM);
234 LogFlow(("PDMR3Init: returns %Vrc\n", rc));
235 return rc;
236}
237
238
239/**
240 * Applies relocations to data and code managed by this
241 * component. This function will be called at init and
242 * whenever the VMM need to relocate it self inside the GC.
243 *
244 * @param pVM VM handle.
245 * @param offDelta Relocation delta relative to old location.
246 * @remark The loader subcomponent is relocated by PDMR3LdrRelocate() very
247 * early in the relocation phase.
248 */
249PDMR3DECL(void) PDMR3Relocate(PVM pVM, RTGCINTPTR offDelta)
250{
251 LogFlow(("PDMR3Relocate\n"));
252
253 /*
254 * Queues.
255 */
256 pdmR3QueueRelocate(pVM, offDelta);
257 pVM->pdm.s.pDevHlpQueueGC = PDMQueueGCPtr(pVM->pdm.s.pDevHlpQueueHC);
258
259 /*
260 * Critical sections.
261 */
262 pdmR3CritSectRelocate(pVM);
263
264 /*
265 * The registered PIC.
266 */
267 if (pVM->pdm.s.Pic.pDevInsRC)
268 {
269 pVM->pdm.s.Pic.pDevInsRC += offDelta;
270 pVM->pdm.s.Pic.pfnSetIrqRC += offDelta;
271 pVM->pdm.s.Pic.pfnGetInterruptRC += offDelta;
272 }
273
274 /*
275 * The registered APIC.
276 */
277 if (pVM->pdm.s.Apic.pDevInsRC)
278 {
279 pVM->pdm.s.Apic.pDevInsRC += offDelta;
280 pVM->pdm.s.Apic.pfnGetInterruptRC += offDelta;
281 pVM->pdm.s.Apic.pfnSetBaseRC += offDelta;
282 pVM->pdm.s.Apic.pfnGetBaseRC += offDelta;
283 pVM->pdm.s.Apic.pfnSetTPRRC += offDelta;
284 pVM->pdm.s.Apic.pfnGetTPRRC += offDelta;
285 pVM->pdm.s.Apic.pfnBusDeliverRC += offDelta;
286 }
287
288 /*
289 * The registered I/O APIC.
290 */
291 if (pVM->pdm.s.IoApic.pDevInsRC)
292 {
293 pVM->pdm.s.IoApic.pDevInsRC += offDelta;
294 pVM->pdm.s.IoApic.pfnSetIrqRC += offDelta;
295 }
296
297 /*
298 * The register PCI Buses.
299 */
300 for (unsigned i = 0; i < RT_ELEMENTS(pVM->pdm.s.aPciBuses); i++)
301 {
302 if (pVM->pdm.s.aPciBuses[i].pDevInsRC)
303 {
304 pVM->pdm.s.aPciBuses[i].pDevInsRC += offDelta;
305 pVM->pdm.s.aPciBuses[i].pfnSetIrqRC += offDelta;
306 }
307 }
308
309 /*
310 * Devices.
311 */
312 RCPTRTYPE(PCPDMDEVHLPGC) pDevHlpGC;
313 int rc = PDMR3GetSymbolGC(pVM, NULL, "g_pdmGCDevHlp", &pDevHlpGC);
314 AssertReleaseMsgRC(rc, ("rc=%Vrc when resolving g_pdmGCDevHlp\n", rc));
315 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
316 {
317 if (pDevIns->pDevReg->fFlags & PDM_DEVREG_FLAGS_GC)
318 {
319 pDevIns->pDevHlpGC = pDevHlpGC;
320 pDevIns->pvInstanceDataGC = MMHyperR3ToRC(pVM, pDevIns->pvInstanceDataR3);
321 pDevIns->pvInstanceDataR0 = MMHyperR3ToR0(pVM, pDevIns->pvInstanceDataR3);
322 pDevIns->Internal.s.pVMGC = pVM->pVMGC;
323 if (pDevIns->Internal.s.pPciBusHC)
324 pDevIns->Internal.s.pPciBusGC = MMHyperR3ToRC(pVM, pDevIns->Internal.s.pPciBusHC);
325 if (pDevIns->Internal.s.pPciDeviceHC)
326 pDevIns->Internal.s.pPciDeviceGC = MMHyperR3ToRC(pVM, pDevIns->Internal.s.pPciDeviceHC);
327 if (pDevIns->pDevReg->pfnRelocate)
328 {
329 LogFlow(("PDMR3Relocate: Relocating device '%s'/%d\n",
330 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
331 pDevIns->pDevReg->pfnRelocate(pDevIns, offDelta);
332 }
333 }
334 }
335}
336
337
338/**
339 * Worker for pdmR3Term that terminates a LUN chain.
340 *
341 * @param pVM Pointer to the shared VM structure.
342 * @param pLun The head of the chain.
343 * @param pszDevice The name of the device (for logging).
344 * @param iInstance The device instance number (for logging).
345 */
346static void pdmR3TermLuns(PVM pVM, PPDMLUN pLun, const char *pszDevice, unsigned iInstance)
347{
348 for (; pLun; pLun = pLun->pNext)
349 {
350 /*
351 * Destroy them one at a time from the bottom up.
352 * (The serial device/drivers depends on this - bad.)
353 */
354 PPDMDRVINS pDrvIns = pLun->pBottom;
355 pLun->pBottom = pLun->pTop = NULL;
356 while (pDrvIns)
357 {
358 PPDMDRVINS pDrvNext = pDrvIns->Internal.s.pUp;
359
360 if (pDrvIns->pDrvReg->pfnDestruct)
361 {
362 LogFlow(("pdmR3DevTerm: Destroying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
363 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pszDevice, iInstance));
364 pDrvIns->pDrvReg->pfnDestruct(pDrvIns);
365 }
366
367 TMR3TimerDestroyDriver(pVM, pDrvIns);
368 //PDMR3QueueDestroyDriver(pVM, pDrvIns);
369 //pdmR3ThreadDestroyDriver(pVM, pDrvIns);
370 SSMR3DeregisterDriver(pVM, pDrvIns, NULL, 0);
371
372 pDrvIns = pDrvNext;
373 }
374 }
375}
376
377
378/**
379 * Terminates the PDM.
380 *
381 * Termination means cleaning up and freeing all resources,
382 * the VM it self is at this point powered off or suspended.
383 *
384 * @returns VBox status code.
385 * @param pVM The VM to operate on.
386 */
387PDMR3DECL(int) PDMR3Term(PVM pVM)
388{
389 LogFlow(("PDMR3Term:\n"));
390 AssertMsg(pVM->pdm.s.offVM, ("bad init order!\n"));
391
392 /*
393 * Iterate the device instances and attach drivers, doing
394 * relevant destruction processing.
395 *
396 * N.B. There is no need to mess around freeing memory allocated
397 * from any MM heap since MM will do that in its Term function.
398 */
399 /* usb ones first. */
400 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
401 {
402 pdmR3TermLuns(pVM, pUsbIns->Internal.s.pLuns, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance);
403
404 if (pUsbIns->pUsbReg->pfnDestruct)
405 {
406 LogFlow(("pdmR3DevTerm: Destroying - device '%s'/%d\n",
407 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
408 pUsbIns->pUsbReg->pfnDestruct(pUsbIns);
409 }
410
411 //TMR3TimerDestroyUsb(pVM, pUsbIns);
412 //SSMR3DeregisterUsb(pVM, pUsbIns, NULL, 0);
413 pdmR3ThreadDestroyUsb(pVM, pUsbIns);
414 }
415
416 /* then the 'normal' ones. */
417 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
418 {
419 pdmR3TermLuns(pVM, pDevIns->Internal.s.pLunsHC, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance);
420
421 if (pDevIns->pDevReg->pfnDestruct)
422 {
423 LogFlow(("pdmR3DevTerm: Destroying - device '%s'/%d\n",
424 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
425 pDevIns->pDevReg->pfnDestruct(pDevIns);
426 }
427
428 TMR3TimerDestroyDevice(pVM, pDevIns);
429 //SSMR3DeregisterDriver(pVM, pDevIns, NULL, 0);
430 pdmR3CritSectDeleteDevice(pVM, pDevIns);
431 //pdmR3ThreadDestroyDevice(pVM, pDevIns);
432 //PDMR3QueueDestroyDevice(pVM, pDevIns);
433 PGMR3PhysMMIO2Deregister(pVM, pDevIns, UINT32_MAX);
434 }
435
436 /*
437 * Destroy all threads.
438 */
439 pdmR3ThreadDestroyAll(pVM);
440
441#ifdef VBOX_WITH_PDM_ASYNC_COMPLETION
442 /*
443 * Free async completion managers.
444 */
445 pdmR3AsyncCompletionTerm(pVM);
446#endif
447
448 /*
449 * Free modules.
450 */
451 pdmR3LdrTermU(pVM->pUVM);
452
453 /*
454 * Destroy the PDM lock.
455 */
456 PDMR3CritSectDelete(&pVM->pdm.s.CritSect);
457
458 LogFlow(("PDMR3Term: returns %Vrc\n", VINF_SUCCESS));
459 return VINF_SUCCESS;
460}
461
462
463/**
464 * Terminates the PDM part of the UVM.
465 *
466 * This will unload any modules left behind.
467 *
468 * @param pUVM Pointer to the user mode VM structure.
469 */
470PDMR3DECL(void) PDMR3TermUVM(PUVM pUVM)
471{
472 /*
473 * In the normal cause of events we will now call pdmR3LdrTermU for
474 * the second time. In the case of init failure however, this might
475 * the first time, which is why we do it.
476 */
477 pdmR3LdrTermU(pUVM);
478}
479
480
481
482
483
484/**
485 * Execute state save operation.
486 *
487 * @returns VBox status code.
488 * @param pVM VM Handle.
489 * @param pSSM SSM operation handle.
490 */
491static DECLCALLBACK(int) pdmR3Save(PVM pVM, PSSMHANDLE pSSM)
492{
493 LogFlow(("pdmR3Save:\n"));
494
495 /*
496 * Save interrupt and DMA states.
497 */
498 SSMR3PutUInt(pSSM, VM_FF_ISSET(pVM, VM_FF_INTERRUPT_APIC));
499 SSMR3PutUInt(pSSM, VM_FF_ISSET(pVM, VM_FF_INTERRUPT_PIC));
500 SSMR3PutUInt(pSSM, VM_FF_ISSET(pVM, VM_FF_PDM_DMA));
501
502 /*
503 * Save the list of device instances so we can check that
504 * they're all still there when we load the state and that
505 * nothing new have been added.
506 */
507 /** @todo We might have to filter out some device classes, like USB attached devices. */
508 uint32_t i = 0;
509 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC, i++)
510 {
511 SSMR3PutU32(pSSM, i);
512 SSMR3PutStrZ(pSSM, pDevIns->pDevReg->szDeviceName);
513 SSMR3PutU32(pSSM, pDevIns->iInstance);
514 }
515 return SSMR3PutU32(pSSM, ~0); /* terminator */
516}
517
518
519/**
520 * Prepare state load operation.
521 *
522 * This will dispatch pending operations and clear the FFs governed by PDM and its devices.
523 *
524 * @returns VBox status code.
525 * @param pVM The VM handle.
526 * @param pSSM The SSM handle.
527 */
528static DECLCALLBACK(int) pdmR3LoadPrep(PVM pVM, PSSMHANDLE pSSM)
529{
530 LogFlow(("pdmR3LoadPrep: %s%s%s%s\n",
531 VM_FF_ISSET(pVM, VM_FF_PDM_QUEUES) ? " VM_FF_PDM_QUEUES" : "",
532 VM_FF_ISSET(pVM, VM_FF_PDM_DMA) ? " VM_FF_PDM_DMA" : "",
533 VM_FF_ISSET(pVM, VM_FF_INTERRUPT_APIC) ? " VM_FF_INTERRUPT_APIC" : "",
534 VM_FF_ISSET(pVM, VM_FF_INTERRUPT_PIC) ? " VM_FF_INTERRUPT_PIC" : ""
535 ));
536
537 /*
538 * In case there is work pending that will raise an interrupt,
539 * start a DMA transfer, or release a lock. (unlikely)
540 */
541 if (VM_FF_ISSET(pVM, VM_FF_PDM_QUEUES))
542 PDMR3QueueFlushAll(pVM);
543
544 /* Clear the FFs. */
545 VM_FF_CLEAR(pVM, VM_FF_INTERRUPT_APIC);
546 VM_FF_CLEAR(pVM, VM_FF_INTERRUPT_PIC);
547 VM_FF_CLEAR(pVM, VM_FF_PDM_DMA);
548
549 return VINF_SUCCESS;
550}
551
552
553/**
554 * Execute state load operation.
555 *
556 * @returns VBox status code.
557 * @param pVM VM Handle.
558 * @param pSSM SSM operation handle.
559 * @param u32Version Data layout version.
560 */
561static DECLCALLBACK(int) pdmR3Load(PVM pVM, PSSMHANDLE pSSM, uint32_t u32Version)
562{
563 LogFlow(("pdmR3Load:\n"));
564
565 /*
566 * Validate version.
567 */
568 if (u32Version != PDM_SAVED_STATE_VERSION)
569 {
570 AssertMsgFailed(("pdmR3Load: Invalid version u32Version=%d!\n", u32Version));
571 return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
572 }
573
574 /*
575 * Load the interrupt and DMA states.
576 */
577 /* APIC interrupt */
578 RTUINT fInterruptPending = 0;
579 int rc = SSMR3GetUInt(pSSM, &fInterruptPending);
580 if (VBOX_FAILURE(rc))
581 return rc;
582 if (fInterruptPending & ~1)
583 {
584 AssertMsgFailed(("fInterruptPending=%#x (APIC)\n", fInterruptPending));
585 return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
586 }
587 AssertRelease(!VM_FF_ISSET(pVM, VM_FF_INTERRUPT_APIC));
588 if (fInterruptPending)
589 VM_FF_SET(pVM, VM_FF_INTERRUPT_APIC);
590
591 /* PIC interrupt */
592 fInterruptPending = 0;
593 rc = SSMR3GetUInt(pSSM, &fInterruptPending);
594 if (VBOX_FAILURE(rc))
595 return rc;
596 if (fInterruptPending & ~1)
597 {
598 AssertMsgFailed(("fInterruptPending=%#x (PIC)\n", fInterruptPending));
599 return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
600 }
601 AssertRelease(!VM_FF_ISSET(pVM, VM_FF_INTERRUPT_PIC));
602 if (fInterruptPending)
603 VM_FF_SET(pVM, VM_FF_INTERRUPT_PIC);
604
605 /* DMA pending */
606 RTUINT fDMAPending = 0;
607 rc = SSMR3GetUInt(pSSM, &fDMAPending);
608 if (VBOX_FAILURE(rc))
609 return rc;
610 if (fDMAPending & ~1)
611 {
612 AssertMsgFailed(("fDMAPending=%#x\n", fDMAPending));
613 return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
614 }
615 AssertRelease(!VM_FF_ISSET(pVM, VM_FF_PDM_DMA));
616 if (fDMAPending)
617 VM_FF_SET(pVM, VM_FF_PDM_DMA);
618
619 /*
620 * Load the list of devices and verify that they are all there.
621 *
622 * We boldly ASSUME that the order is fixed and that it's a good, this
623 * makes it way easier to validate...
624 */
625 uint32_t i = 0;
626 PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances;
627 for (;;pDevIns = pDevIns->Internal.s.pNextHC, i++)
628 {
629 /* Get the separator / terminator. */
630 uint32_t u32Sep;
631 int rc = SSMR3GetU32(pSSM, &u32Sep);
632 if (VBOX_FAILURE(rc))
633 return rc;
634 if (u32Sep == (uint32_t)~0)
635 break;
636 if (u32Sep != i)
637 AssertMsgFailedReturn(("Out of seqence. u32Sep=%#x i=%#x\n", u32Sep, i), VERR_SSM_DATA_UNIT_FORMAT_CHANGED);
638
639 /* get the name and instance number. */
640 char szDeviceName[sizeof(pDevIns->pDevReg->szDeviceName)];
641 rc = SSMR3GetStrZ(pSSM, szDeviceName, sizeof(szDeviceName));
642 if (VBOX_FAILURE(rc))
643 return rc;
644 RTUINT iInstance;
645 rc = SSMR3GetUInt(pSSM, &iInstance);
646 if (VBOX_FAILURE(rc))
647 return rc;
648
649 /* compare */
650 if (!pDevIns)
651 {
652 LogRel(("Device '%s'/%d not found in current config\n", szDeviceName, iInstance));
653 if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT)
654 AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
655 break;
656 }
657 if ( strcmp(szDeviceName, pDevIns->pDevReg->szDeviceName)
658 || pDevIns->iInstance != iInstance)
659 {
660 LogRel(("u32Sep=%d loaded '%s'/%d configured '%s'/%d\n",
661 u32Sep, szDeviceName, iInstance, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
662 if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT)
663 AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
664 }
665 }
666
667 /*
668 * Too many devices?
669 */
670 if (pDevIns)
671 {
672 LogRel(("Device '%s'/%d not found in saved state\n", pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
673 if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT)
674 AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
675 }
676
677 return VINF_SUCCESS;
678}
679
680
681/**
682 * This function will notify all the devices and their
683 * attached drivers about the VM now being powered on.
684 *
685 * @param pVM VM Handle.
686 */
687PDMR3DECL(void) PDMR3PowerOn(PVM pVM)
688{
689 LogFlow(("PDMR3PowerOn:\n"));
690
691 /*
692 * Iterate the device instances.
693 * The attached drivers are processed first.
694 */
695 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
696 {
697 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsHC; pLun; pLun = pLun->pNext)
698 /** @todo Inverse the order here? */
699 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
700 if (pDrvIns->pDrvReg->pfnPowerOn)
701 {
702 LogFlow(("PDMR3PowerOn: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
703 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
704 pDrvIns->pDrvReg->pfnPowerOn(pDrvIns);
705 }
706
707 if (pDevIns->pDevReg->pfnPowerOn)
708 {
709 LogFlow(("PDMR3PowerOn: Notifying - device '%s'/%d\n",
710 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
711 pDevIns->pDevReg->pfnPowerOn(pDevIns);
712 }
713 }
714
715#ifdef VBOX_WITH_USB
716 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
717 {
718 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
719 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
720 if (pDrvIns->pDrvReg->pfnPowerOn)
721 {
722 LogFlow(("PDMR3PowerOn: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
723 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
724 pDrvIns->pDrvReg->pfnPowerOn(pDrvIns);
725 }
726
727 if (pUsbIns->pUsbReg->pfnVMPowerOn)
728 {
729 LogFlow(("PDMR3PowerOn: Notifying - device '%s'/%d\n",
730 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
731 pUsbIns->pUsbReg->pfnVMPowerOn(pUsbIns);
732 }
733 }
734#endif
735
736 /*
737 * Resume all threads.
738 */
739 pdmR3ThreadResumeAll(pVM);
740
741 LogFlow(("PDMR3PowerOn: returns void\n"));
742}
743
744
745
746
747/**
748 * This function will notify all the devices and their
749 * attached drivers about the VM now being reset.
750 *
751 * @param pVM VM Handle.
752 */
753PDMR3DECL(void) PDMR3Reset(PVM pVM)
754{
755 LogFlow(("PDMR3Reset:\n"));
756
757 /*
758 * Clear all pending interrupts and DMA operations.
759 */
760 VM_FF_CLEAR(pVM, VM_FF_INTERRUPT_APIC);
761 VM_FF_CLEAR(pVM, VM_FF_INTERRUPT_PIC);
762 VM_FF_CLEAR(pVM, VM_FF_PDM_DMA);
763
764 /*
765 * Iterate the device instances.
766 * The attached drivers are processed first.
767 */
768 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
769 {
770 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsHC; pLun; pLun = pLun->pNext)
771 /** @todo Inverse the order here? */
772 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
773 if (pDrvIns->pDrvReg->pfnReset)
774 {
775 LogFlow(("PDMR3Reset: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
776 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
777 pDrvIns->pDrvReg->pfnReset(pDrvIns);
778 }
779
780 if (pDevIns->pDevReg->pfnReset)
781 {
782 LogFlow(("PDMR3Reset: Notifying - device '%s'/%d\n",
783 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
784 pDevIns->pDevReg->pfnReset(pDevIns);
785 }
786 }
787
788#ifdef VBOX_WITH_USB
789 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
790 {
791 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
792 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
793 if (pDrvIns->pDrvReg->pfnReset)
794 {
795 LogFlow(("PDMR3Reset: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
796 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
797 pDrvIns->pDrvReg->pfnReset(pDrvIns);
798 }
799
800 if (pUsbIns->pUsbReg->pfnVMReset)
801 {
802 LogFlow(("PDMR3Reset: Notifying - device '%s'/%d\n",
803 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
804 pUsbIns->pUsbReg->pfnVMReset(pUsbIns);
805 }
806 }
807#endif
808
809 LogFlow(("PDMR3Reset: returns void\n"));
810}
811
812
813/**
814 * This function will notify all the devices and their
815 * attached drivers about the VM now being reset.
816 *
817 * @param pVM VM Handle.
818 */
819PDMR3DECL(void) PDMR3Suspend(PVM pVM)
820{
821 LogFlow(("PDMR3Suspend:\n"));
822
823 /*
824 * Iterate the device instances.
825 * The attached drivers are processed first.
826 */
827 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
828 {
829 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsHC; pLun; pLun = pLun->pNext)
830 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
831 if (pDrvIns->pDrvReg->pfnSuspend)
832 {
833 LogFlow(("PDMR3Suspend: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
834 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
835 pDrvIns->pDrvReg->pfnSuspend(pDrvIns);
836 }
837
838 if (pDevIns->pDevReg->pfnSuspend)
839 {
840 LogFlow(("PDMR3Suspend: Notifying - device '%s'/%d\n",
841 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
842 pDevIns->pDevReg->pfnSuspend(pDevIns);
843 }
844 }
845
846#ifdef VBOX_WITH_USB
847 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
848 {
849 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
850 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
851 if (pDrvIns->pDrvReg->pfnSuspend)
852 {
853 LogFlow(("PDMR3Suspend: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
854 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
855 pDrvIns->pDrvReg->pfnSuspend(pDrvIns);
856 }
857
858 if (pUsbIns->pUsbReg->pfnVMSuspend)
859 {
860 LogFlow(("PDMR3Suspend: Notifying - device '%s'/%d\n",
861 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
862 pUsbIns->pUsbReg->pfnVMSuspend(pUsbIns);
863 }
864 }
865#endif
866
867 /*
868 * Suspend all threads.
869 */
870 pdmR3ThreadSuspendAll(pVM);
871
872 LogFlow(("PDMR3Suspend: returns void\n"));
873}
874
875
876/**
877 * This function will notify all the devices and their
878 * attached drivers about the VM now being resumed.
879 *
880 * @param pVM VM Handle.
881 */
882PDMR3DECL(void) PDMR3Resume(PVM pVM)
883{
884 LogFlow(("PDMR3Resume:\n"));
885
886 /*
887 * Iterate the device instances.
888 * The attached drivers are processed first.
889 */
890 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
891 {
892 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsHC; pLun; pLun = pLun->pNext)
893 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
894 if (pDrvIns->pDrvReg->pfnResume)
895 {
896 LogFlow(("PDMR3Resume: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
897 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
898 pDrvIns->pDrvReg->pfnResume(pDrvIns);
899 }
900
901 if (pDevIns->pDevReg->pfnResume)
902 {
903 LogFlow(("PDMR3Resume: Notifying - device '%s'/%d\n",
904 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
905 pDevIns->pDevReg->pfnResume(pDevIns);
906 }
907 }
908
909#ifdef VBOX_WITH_USB
910 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
911 {
912 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
913 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
914 if (pDrvIns->pDrvReg->pfnResume)
915 {
916 LogFlow(("PDMR3Resume: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
917 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
918 pDrvIns->pDrvReg->pfnResume(pDrvIns);
919 }
920
921 if (pUsbIns->pUsbReg->pfnVMResume)
922 {
923 LogFlow(("PDMR3Resume: Notifying - device '%s'/%d\n",
924 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
925 pUsbIns->pUsbReg->pfnVMResume(pUsbIns);
926 }
927 }
928#endif
929
930 /*
931 * Resume all threads.
932 */
933 pdmR3ThreadResumeAll(pVM);
934
935 LogFlow(("PDMR3Resume: returns void\n"));
936}
937
938
939/**
940 * This function will notify all the devices and their
941 * attached drivers about the VM being powered off.
942 *
943 * @param pVM VM Handle.
944 */
945PDMR3DECL(void) PDMR3PowerOff(PVM pVM)
946{
947 LogFlow(("PDMR3PowerOff:\n"));
948
949 /*
950 * Iterate the device instances.
951 * The attached drivers are processed first.
952 */
953 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextHC)
954 {
955 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsHC; pLun; pLun = pLun->pNext)
956 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
957 if (pDrvIns->pDrvReg->pfnPowerOff)
958 {
959 LogFlow(("PDMR3PowerOff: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
960 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
961 pDrvIns->pDrvReg->pfnPowerOff(pDrvIns);
962 }
963
964 if (pDevIns->pDevReg->pfnPowerOff)
965 {
966 LogFlow(("PDMR3PowerOff: Notifying - device '%s'/%d\n",
967 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
968 pDevIns->pDevReg->pfnPowerOff(pDevIns);
969 }
970 }
971
972#ifdef VBOX_WITH_USB
973 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
974 {
975 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
976 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
977 if (pDrvIns->pDrvReg->pfnPowerOff)
978 {
979 LogFlow(("PDMR3PowerOff: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
980 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
981 pDrvIns->pDrvReg->pfnPowerOff(pDrvIns);
982 }
983
984 if (pUsbIns->pUsbReg->pfnVMPowerOff)
985 {
986 LogFlow(("PDMR3PowerOff: Notifying - device '%s'/%d\n",
987 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
988 pUsbIns->pUsbReg->pfnVMPowerOff(pUsbIns);
989 }
990 }
991#endif
992
993 /*
994 * Suspend all threads.
995 */
996 pdmR3ThreadSuspendAll(pVM);
997
998 LogFlow(("PDMR3PowerOff: returns void\n"));
999}
1000
1001
1002/**
1003 * Queries the base interace of a device instance.
1004 *
1005 * The caller can use this to query other interfaces the device implements
1006 * and use them to talk to the device.
1007 *
1008 * @returns VBox status code.
1009 * @param pVM VM handle.
1010 * @param pszDevice Device name.
1011 * @param iInstance Device instance.
1012 * @param ppBase Where to store the pointer to the base device interface on success.
1013 * @remark We're not doing any locking ATM, so don't try call this at times when the
1014 * device chain is known to be updated.
1015 */
1016PDMR3DECL(int) PDMR3QueryDevice(PVM pVM, const char *pszDevice, unsigned iInstance, PPDMIBASE *ppBase)
1017{
1018 LogFlow(("PDMR3DeviceQuery: pszDevice=%p:{%s} iInstance=%u ppBase=%p\n", pszDevice, pszDevice, iInstance, ppBase));
1019
1020 /*
1021 * Iterate registered devices looking for the device.
1022 */
1023 RTUINT cchDevice = strlen(pszDevice);
1024 for (PPDMDEV pDev = pVM->pdm.s.pDevs; pDev; pDev = pDev->pNext)
1025 {
1026 if ( pDev->cchName == cchDevice
1027 && !memcmp(pDev->pDevReg->szDeviceName, pszDevice, cchDevice))
1028 {
1029 /*
1030 * Iterate device instances.
1031 */
1032 for (PPDMDEVINS pDevIns = pDev->pInstances; pDevIns; pDevIns = pDevIns->Internal.s.pPerDeviceNextHC)
1033 {
1034 if (pDevIns->iInstance == iInstance)
1035 {
1036 if (pDevIns->IBase.pfnQueryInterface)
1037 {
1038 *ppBase = &pDevIns->IBase;
1039 LogFlow(("PDMR3DeviceQuery: return VINF_SUCCESS and *ppBase=%p\n", *ppBase));
1040 return VINF_SUCCESS;
1041 }
1042
1043 LogFlow(("PDMR3DeviceQuery: returns VERR_PDM_DEVICE_INSTANCE_NO_IBASE\n"));
1044 return VERR_PDM_DEVICE_INSTANCE_NO_IBASE;
1045 }
1046 }
1047
1048 LogFlow(("PDMR3DeviceQuery: returns VERR_PDM_DEVICE_INSTANCE_NOT_FOUND\n"));
1049 return VERR_PDM_DEVICE_INSTANCE_NOT_FOUND;
1050 }
1051 }
1052
1053 LogFlow(("PDMR3QueryDevice: returns VERR_PDM_DEVICE_NOT_FOUND\n"));
1054 return VERR_PDM_DEVICE_NOT_FOUND;
1055}
1056
1057
1058/**
1059 * Queries the base interface of a device LUN.
1060 *
1061 * This differs from PDMR3QueryLun by that it returns the interface on the
1062 * device and not the top level driver.
1063 *
1064 * @returns VBox status code.
1065 * @param pVM VM Handle.
1066 * @param pszDevice Device name.
1067 * @param iInstance Device instance.
1068 * @param iLun The Logical Unit to obtain the interface of.
1069 * @param ppBase Where to store the base interface pointer.
1070 * @remark We're not doing any locking ATM, so don't try call this at times when the
1071 * device chain is known to be updated.
1072 */
1073PDMR3DECL(int) PDMR3QueryDeviceLun(PVM pVM, const char *pszDevice, unsigned iInstance, unsigned iLun, PPDMIBASE *ppBase)
1074{
1075 LogFlow(("PDMR3QueryLun: pszDevice=%p:{%s} iInstance=%u iLun=%u ppBase=%p\n",
1076 pszDevice, pszDevice, iInstance, iLun, ppBase));
1077
1078 /*
1079 * Find the LUN.
1080 */
1081 PPDMLUN pLun;
1082 int rc = pdmR3DevFindLun(pVM, pszDevice, iInstance, iLun, &pLun);
1083 if (VBOX_SUCCESS(rc))
1084 {
1085 *ppBase = pLun->pBase;
1086 LogFlow(("PDMR3QueryDeviceLun: return VINF_SUCCESS and *ppBase=%p\n", *ppBase));
1087 return VINF_SUCCESS;
1088 }
1089 LogFlow(("PDMR3QueryDeviceLun: returns %Vrc\n", rc));
1090 return rc;
1091}
1092
1093
1094/**
1095 * Query the interface of the top level driver on a LUN.
1096 *
1097 * @returns VBox status code.
1098 * @param pVM VM Handle.
1099 * @param pszDevice Device name.
1100 * @param iInstance Device instance.
1101 * @param iLun The Logical Unit to obtain the interface of.
1102 * @param ppBase Where to store the base interface pointer.
1103 * @remark We're not doing any locking ATM, so don't try call this at times when the
1104 * device chain is known to be updated.
1105 */
1106PDMR3DECL(int) PDMR3QueryLun(PVM pVM, const char *pszDevice, unsigned iInstance, unsigned iLun, PPDMIBASE *ppBase)
1107{
1108 LogFlow(("PDMR3QueryLun: pszDevice=%p:{%s} iInstance=%u iLun=%u ppBase=%p\n",
1109 pszDevice, pszDevice, iInstance, iLun, ppBase));
1110
1111 /*
1112 * Find the LUN.
1113 */
1114 PPDMLUN pLun;
1115 int rc = pdmR3DevFindLun(pVM, pszDevice, iInstance, iLun, &pLun);
1116 if (VBOX_SUCCESS(rc))
1117 {
1118 if (pLun->pTop)
1119 {
1120 *ppBase = &pLun->pTop->IBase;
1121 LogFlow(("PDMR3QueryLun: return %Vrc and *ppBase=%p\n", VINF_SUCCESS, *ppBase));
1122 return VINF_SUCCESS;
1123 }
1124 rc = VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN;
1125 }
1126 LogFlow(("PDMR3QueryLun: returns %Vrc\n", rc));
1127 return rc;
1128}
1129
1130/**
1131 * Executes pending DMA transfers.
1132 * Forced Action handler.
1133 *
1134 * @param pVM VM handle.
1135 */
1136PDMR3DECL(void) PDMR3DmaRun(PVM pVM)
1137{
1138 VM_FF_CLEAR(pVM, VM_FF_PDM_DMA);
1139 if (pVM->pdm.s.pDmac)
1140 {
1141 bool fMore = pVM->pdm.s.pDmac->Reg.pfnRun(pVM->pdm.s.pDmac->pDevIns);
1142 if (fMore)
1143 VM_FF_SET(pVM, VM_FF_PDM_DMA);
1144 }
1145}
1146
1147
1148/**
1149 * Call polling function.
1150 *
1151 * @param pVM VM handle.
1152 */
1153PDMR3DECL(void) PDMR3Poll(PVM pVM)
1154{
1155 /* This is temporary hack and shall be removed ASAP! */
1156 unsigned iPoller = pVM->pdm.s.cPollers;
1157 if (iPoller)
1158 {
1159 while (iPoller-- > 0)
1160 pVM->pdm.s.apfnPollers[iPoller](pVM->pdm.s.aDrvInsPollers[iPoller]);
1161 TMTimerSetMillies(pVM->pdm.s.pTimerPollers, 3);
1162 }
1163}
1164
1165
1166/**
1167 * Internal timer callback function.
1168 *
1169 * @param pVM The VM.
1170 * @param pTimer The timer handle.
1171 * @param pvUser User argument specified upon timer creation.
1172 */
1173static DECLCALLBACK(void) pdmR3PollerTimer(PVM pVM, PTMTIMER pTimer, void *pvUser)
1174{
1175 PDMR3Poll(pVM);
1176}
1177
1178
1179/**
1180 * Service a VMMCALLHOST_PDM_LOCK call.
1181 *
1182 * @returns VBox status code.
1183 * @param pVM The VM handle.
1184 */
1185PDMR3DECL(int) PDMR3LockCall(PVM pVM)
1186{
1187 return PDMR3CritSectEnterEx(&pVM->pdm.s.CritSect, true /* fHostCall */);
1188}
1189
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette