VirtualBox

source: vbox/trunk/src/VBox/VMM/PDM.cpp@ 20007

Last change on this file since 20007 was 19793, checked in by vboxsync, 16 years ago

Deal with critical section nesting when trying to clean up after a guru meditation.
  • Property svn:eol-style set to native
  • Property svn:keywords set to Id
File size: 50.5 KB
Line 
1/* $Id: PDM.cpp 19793 2009-05-18 14:30:15Z vboxsync $ */
2/** @file
3 * PDM - Pluggable Device Manager.
4 */
5
6/*
7 * Copyright (C) 2006-2007 Sun Microsystems, Inc.
8 *
9 * This file is part of VirtualBox Open Source Edition (OSE), as
10 * available from http://www.virtualbox.org. This file is free software;
11 * you can redistribute it and/or modify it under the terms of the GNU
12 * General Public License (GPL) as published by the Free Software
13 * Foundation, in version 2 as it comes in the "COPYING" file of the
14 * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15 * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16 *
17 * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa
18 * Clara, CA 95054 USA or visit http://www.sun.com if you need
19 * additional information or have any questions.
20 */
21
22
23/** @page pg_pdm PDM - The Pluggable Device & Driver Manager
24 *
25 * VirtualBox is designed to be very configurable, i.e. the ability to select
26 * virtual devices and configure them uniquely for a VM. For this reason
27 * virtual devices are not statically linked with the VMM but loaded, linked and
28 * instantiated at runtime by PDM using the information found in the
29 * Configuration Manager (CFGM).
30 *
31 * While the chief purpose of PDM is to manager of devices their drivers, it
32 * also serves as somewhere to put usful things like cross context queues, cross
33 * context synchronization (like critsect), VM centric thread management,
34 * asynchronous I/O framework, and so on.
35 *
36 * @see grp_pdm
37 *
38 *
39 * @section sec_pdm_dev The Pluggable Devices
40 *
41 * Devices register themselves when the module containing them is loaded. PDM
42 * will call the entry point 'VBoxDevicesRegister' when loading a device module.
43 * The device module will then use the supplied callback table to check the VMM
44 * version and to register its devices. Each device have an unique (for the
45 * configured VM) name. The name is not only used in PDM but also in CFGM (to
46 * organize device and device instance settings) and by anyone who wants to talk
47 * to a specific device instance.
48 *
49 * When all device modules have been successfully loaded PDM will instantiate
50 * those devices which are configured for the VM. Note that a device may have
51 * more than one instance, see network adaptors for instance. When
52 * instantiating a device PDM provides device instance memory and a callback
53 * table (aka Device Helpers / DevHlp) with the VM APIs which the device
54 * instance is trusted with.
55 *
56 * Some devices are trusted devices, most are not. The trusted devices are an
57 * integrated part of the VM and can obtain the VM handle from their device
58 * instance handles, thus enabling them to call any VM api. Untrusted devices
59 * can only use the callbacks provided during device instantiation.
60 *
61 * The main purpose in having DevHlps rather than just giving all the devices
62 * the VM handle and let them call the internal VM APIs directly, is both to
63 * create a binary interface that can be supported accross releases and to
64 * create a barrier between devices and the VM. (The trusted / untrusted bit
65 * hasn't turned out to be of much use btw., but it's easy to maintain so there
66 * isn't any point in removing it.)
67 *
68 * A device can provide a ring-0 and/or a raw-mode context extension to improve
69 * the VM performance by handling exits and traps (respectively) without
70 * requiring context switches (to ring-3). Callbacks for MMIO and I/O ports can
71 * needs to be registered specifically for the additional contexts for this to
72 * make sense. Also, the device has to be trusted to be loaded into R0/RC
73 * because of the extra privilege it entails. Note that raw-mode code and data
74 * will be subject to relocation.
75 *
76 *
77 * @section sec_pdm_special_devs Special Devices
78 *
79 * Several kinds of devices interacts with the VMM and/or other device and PDM
80 * will work like a mediator for these. The typical pattern is that the device
81 * calls a special registration device helper with a set of callbacks, PDM
82 * responds by copying this and providing a pointer to a set helper callbacks
83 * for that particular kind of device. Unlike interfaces where the callback
84 * table pointer is used a 'this' pointer, these arrangements will use the
85 * device instance pointer (PPDMDEVINS) as a kind of 'this' pointer.
86 *
87 * For an example of this kind of setup, see the PIC. The PIC registers itself
88 * by calling PDMDEVHLPR3::pfnPICRegister. PDM saves the device instance,
89 * copies the callback tables (PDMPICREG), resolving the ring-0 and raw-mode
90 * addresses in the process, and hands back the pointer to a set of helper
91 * methods (PDMPICHLPR3). The PCI device then queries the ring-0 and raw-mode
92 * helpers using PDMPICHLPR3::pfnGetR0Helpers and PDMPICHLPR3::pfnGetRCHelpers.
93 * The PCI device repeates ths pfnGetRCHelpers call in it's relocation method
94 * since the address changes when RC is relocated.
95 *
96 * @see grp_pdm_device
97 *
98 *
99 * @section sec_pdm_usbdev The Pluggable USB Devices
100 *
101 * USB devices are handled a little bit differently than other devices. The
102 * general concepts wrt. pluggability are mostly the same, but the details
103 * varies. The registration entry point is 'VBoxUsbRegister', the device
104 * instance is PDMUSBINS and the callbacks helpers are different. Also, USB
105 * device are restricted to ring-3 and cannot have any ring-0 or raw-mode
106 * extensions (at least not yet).
107 *
108 * The way USB devices work differs greatly from other devices though since they
109 * aren't attaches directly to the PCI/ISA/whatever system buses but via a
110 * USB host control (OHCI, UHCI or EHCI). USB devices handles USB requests
111 * (URBs) and does not register I/O ports, MMIO ranges or PCI bus
112 * devices/functions.
113 *
114 * @see grp_pdm_usbdev
115 *
116 *
117 * @section sec_pdm_drv The Pluggable Drivers
118 *
119 * The VM devices are often accessing host hardware or OS facilities. For most
120 * devices these facilities can be abstracted in one or more levels. These
121 * abstractions are called drivers.
122 *
123 * For instance take a DVD/CD drive. This can be connected to a SCSI
124 * controller, an ATA controller or a SATA controller. The basics of the DVD/CD
125 * drive implementation remains the same - eject, insert, read, seek, and such.
126 * (For the scsi case, you might wanna speak SCSI directly to, but that can of
127 * course be fixed - see SCSI passthru.) So, it
128 * makes much sense to have a generic CD/DVD driver which implements this.
129 *
130 * Then the media 'inserted' into the DVD/CD drive can be a ISO image, or it can
131 * be read from a real CD or DVD drive (there are probably other custom formats
132 * someone could desire to read or construct too). So, it would make sense to
133 * have abstracted interfaces for dealing with this in a generic way so the
134 * cdrom unit doesn't have to implement it all. Thus we have created the
135 * CDROM/DVD media driver family.
136 *
137 * So, for this example the IDE controller #1 (i.e. secondary) will have
138 * the DVD/CD Driver attached to it's LUN #0 (master). When a media is mounted
139 * the DVD/CD Driver will have a ISO, HostDVD or RAW (media) Driver attached.
140 *
141 * It is possible to configure many levels of drivers inserting filters, loggers,
142 * or whatever you desire into the chain. We're using this for network sniffing
143 * for instance.
144 *
145 * The drivers are loaded in a similar manner to that of the device, namely by
146 * iterating a keyspace in CFGM, load the modules listed there and call
147 * 'VBoxDriversRegister' with a callback table.
148 *
149 * @see grp_pdm_driver
150 *
151 *
152 * @section sec_pdm_ifs Interfaces
153 *
154 * The pluggable drivers and devices exposes one standard interface (callback
155 * table) which is used to construct, destruct, attach, detach,( ++,) and query
156 * other interfaces. A device will query the interfaces required for it's
157 * operation during init and hotplug. PDM may query some interfaces during
158 * runtime mounting too.
159 *
160 * An interface here means a function table contained within the device or
161 * driver instance data. Its method are invoked with the function table pointer
162 * as the first argument and they will calculate the address of the device or
163 * driver instance data from it. (This is one of the aspects which *might* have
164 * been better done in C++.)
165 *
166 * @see grp_pdm_interfaces
167 *
168 *
169 * @section sec_pdm_utils Utilities
170 *
171 * As mentioned earlier, PDM is the location of any usful constrcts that doesn't
172 * quite fit into IPRT. The next subsections will discuss these.
173 *
174 * One thing these APIs all have in common is that resources will be associated
175 * with a device / driver and automatically freed after it has been destroyed if
176 * the destructor didn't do this.
177 *
178 *
179 * @subsection sec_pdm_async_completion Async I/O
180 *
181 * The PDM Async I/O API provides a somewhat platform agnostic interface for
182 * asynchronous I/O. For reasons of performance and complexcity this does not
183 * build upon any IPRT API.
184 *
185 * @todo more details.
186 *
187 * @see grp_pdm_async_completion
188 *
189 *
190 * @subsection sec_pdm_async_task Async Task - not implemented
191 *
192 * @todo implement and describe
193 *
194 * @see grp_pdm_async_task
195 *
196 *
197 * @subsection sec_pdm_critsect Critical Section
198 *
199 * The PDM Critical Section API is currently building on the IPRT API with the
200 * same name. It adds the posibility to use critical sections in ring-0 and
201 * raw-mode as well as in ring-3. There are certain restrictions on the RC and
202 * R0 usage though since we're not able to wait on it, nor wake up anyone that
203 * is waiting on it. These restrictions origins with the use of a ring-3 event
204 * semaphore. In a later incarnation we plan to replace the ring-3 event
205 * semaphore with a ring-0 one, thus enabling us to wake up waiters while
206 * exectuing in ring-0 and making the hardware assisted execution mode more
207 * efficient. (Raw-mode won't benefit much from this, naturally.)
208 *
209 * @see grp_pdm_critsect
210 *
211 *
212 * @subsection sec_pdm_queue Queue
213 *
214 * The PDM Queue API is for queuing one or more tasks for later consumption in
215 * ring-3 by EMT, and optinally forcing a delayed or ASAP return to ring-3. The
216 * queues can also be run on a timer basis as an alternative to the ASAP thing.
217 * The queue will be flushed at forced action time.
218 *
219 * A queue can also be used by another thread (a I/O worker for instance) to
220 * send work / events over to the EMT.
221 *
222 * @see grp_pdm_queue
223 *
224 *
225 * @subsection sec_pdm_task Task - not implemented yet
226 *
227 * The PDM Task API is for flagging a task for execution at a later point when
228 * we're back in ring-3, optionally forcing the ring-3 return to happen ASAP.
229 * As you can see the concept is similar to queues only simpler.
230 *
231 * A task can also be scheduled by another thread (a I/O worker for instance) as
232 * a mean of getting something done in EMT.
233 *
234 * @see grp_pdm_task
235 *
236 *
237 * @subsection sec_pdm_thread Thread
238 *
239 * The PDM Thread API is there to help devices and drivers manage their threads
240 * correctly wrt. power on, suspend, resume, power off and destruction.
241 *
242 * The general usage pattern for threads in the employ of devices and drivers is
243 * that they shuffle data or requests while the VM is running and stop doing
244 * this when the VM is paused or powered down. Rogue threads running while the
245 * VM is paused can cause the state to change during saving or have other
246 * unwanted side effects. The PDM Threads API ensures that this won't happen.
247 *
248 * @see grp_pdm_thread
249 *
250 */
251
252
253/*******************************************************************************
254* Header Files *
255*******************************************************************************/
256#define LOG_GROUP LOG_GROUP_PDM
257#include "PDMInternal.h"
258#include <VBox/pdm.h>
259#include <VBox/mm.h>
260#include <VBox/pgm.h>
261#include <VBox/ssm.h>
262#include <VBox/vm.h>
263#include <VBox/uvm.h>
264#include <VBox/vmm.h>
265#include <VBox/param.h>
266#include <VBox/err.h>
267#include <VBox/sup.h>
268
269#include <VBox/log.h>
270#include <iprt/asm.h>
271#include <iprt/assert.h>
272#include <iprt/alloc.h>
273#include <iprt/ldr.h>
274#include <iprt/path.h>
275#include <iprt/string.h>
276
277
278/*******************************************************************************
279* Defined Constants And Macros *
280*******************************************************************************/
281/** The PDM saved state version. */
282#define PDM_SAVED_STATE_VERSION 3
283
284
285/*******************************************************************************
286* Internal Functions *
287*******************************************************************************/
288static DECLCALLBACK(int) pdmR3Save(PVM pVM, PSSMHANDLE pSSM);
289static DECLCALLBACK(int) pdmR3Load(PVM pVM, PSSMHANDLE pSSM, uint32_t u32Version);
290static DECLCALLBACK(int) pdmR3LoadPrep(PVM pVM, PSSMHANDLE pSSM);
291
292
293
294/**
295 * Initializes the PDM part of the UVM.
296 *
297 * This doesn't really do much right now but has to be here for the sake
298 * of completeness.
299 *
300 * @returns VBox status code.
301 * @param pUVM Pointer to the user mode VM structure.
302 */
303VMMR3DECL(int) PDMR3InitUVM(PUVM pUVM)
304{
305 AssertCompile(sizeof(pUVM->pdm.s) <= sizeof(pUVM->pdm.padding));
306 AssertRelease(sizeof(pUVM->pdm.s) <= sizeof(pUVM->pdm.padding));
307 pUVM->pdm.s.pModules = NULL;
308 return VINF_SUCCESS;
309}
310
311
312/**
313 * Initializes the PDM.
314 *
315 * @returns VBox status code.
316 * @param pVM The VM to operate on.
317 */
318VMMR3DECL(int) PDMR3Init(PVM pVM)
319{
320 LogFlow(("PDMR3Init\n"));
321
322 /*
323 * Assert alignment and sizes.
324 */
325 AssertRelease(!(RT_OFFSETOF(VM, pdm.s) & 31));
326 AssertRelease(sizeof(pVM->pdm.s) <= sizeof(pVM->pdm.padding));
327 AssertCompileMemberAlignment(PDM, CritSect, sizeof(uintptr_t));
328 /*
329 * Init the structure.
330 */
331 pVM->pdm.s.offVM = RT_OFFSETOF(VM, pdm.s);
332 pVM->pdm.s.GCPhysVMMDevHeap = NIL_RTGCPHYS;
333
334 /*
335 * Initialize sub compontents.
336 */
337 int rc = pdmR3CritSectInit(pVM);
338 if (RT_SUCCESS(rc))
339 {
340 rc = PDMR3CritSectInit(pVM, &pVM->pdm.s.CritSect, "PDM");
341 if (RT_SUCCESS(rc))
342 rc = pdmR3LdrInitU(pVM->pUVM);
343 if (RT_SUCCESS(rc))
344 {
345 rc = pdmR3DrvInit(pVM);
346 if (RT_SUCCESS(rc))
347 {
348 rc = pdmR3DevInit(pVM);
349 if (RT_SUCCESS(rc))
350 {
351#ifdef VBOX_WITH_PDM_ASYNC_COMPLETION
352 rc = pdmR3AsyncCompletionInit(pVM);
353 if (RT_SUCCESS(rc))
354#endif
355 {
356 /*
357 * Register the saved state data unit.
358 */
359 rc = SSMR3RegisterInternal(pVM, "pdm", 1, PDM_SAVED_STATE_VERSION, 128,
360 NULL, pdmR3Save, NULL,
361 pdmR3LoadPrep, pdmR3Load, NULL);
362 if (RT_SUCCESS(rc))
363 {
364 LogFlow(("PDM: Successfully initialized\n"));
365 return rc;
366 }
367
368 }
369 }
370 }
371 }
372 }
373
374 /*
375 * Cleanup and return failure.
376 */
377 PDMR3Term(pVM);
378 LogFlow(("PDMR3Init: returns %Rrc\n", rc));
379 return rc;
380}
381
382
383/**
384 * Applies relocations to data and code managed by this
385 * component. This function will be called at init and
386 * whenever the VMM need to relocate it self inside the GC.
387 *
388 * @param pVM VM handle.
389 * @param offDelta Relocation delta relative to old location.
390 * @remark The loader subcomponent is relocated by PDMR3LdrRelocate() very
391 * early in the relocation phase.
392 */
393VMMR3DECL(void) PDMR3Relocate(PVM pVM, RTGCINTPTR offDelta)
394{
395 LogFlow(("PDMR3Relocate\n"));
396
397 /*
398 * Queues.
399 */
400 pdmR3QueueRelocate(pVM, offDelta);
401 pVM->pdm.s.pDevHlpQueueRC = PDMQueueRCPtr(pVM->pdm.s.pDevHlpQueueR3);
402
403 /*
404 * Critical sections.
405 */
406 pdmR3CritSectRelocate(pVM);
407
408 /*
409 * The registered PIC.
410 */
411 if (pVM->pdm.s.Pic.pDevInsRC)
412 {
413 pVM->pdm.s.Pic.pDevInsRC += offDelta;
414 pVM->pdm.s.Pic.pfnSetIrqRC += offDelta;
415 pVM->pdm.s.Pic.pfnGetInterruptRC += offDelta;
416 }
417
418 /*
419 * The registered APIC.
420 */
421 if (pVM->pdm.s.Apic.pDevInsRC)
422 {
423 pVM->pdm.s.Apic.pDevInsRC += offDelta;
424 pVM->pdm.s.Apic.pfnGetInterruptRC += offDelta;
425 pVM->pdm.s.Apic.pfnSetBaseRC += offDelta;
426 pVM->pdm.s.Apic.pfnGetBaseRC += offDelta;
427 pVM->pdm.s.Apic.pfnSetTPRRC += offDelta;
428 pVM->pdm.s.Apic.pfnGetTPRRC += offDelta;
429 pVM->pdm.s.Apic.pfnBusDeliverRC += offDelta;
430 pVM->pdm.s.Apic.pfnWriteMSRRC += offDelta;
431 pVM->pdm.s.Apic.pfnReadMSRRC += offDelta;
432 }
433
434 /*
435 * The registered I/O APIC.
436 */
437 if (pVM->pdm.s.IoApic.pDevInsRC)
438 {
439 pVM->pdm.s.IoApic.pDevInsRC += offDelta;
440 pVM->pdm.s.IoApic.pfnSetIrqRC += offDelta;
441 }
442
443 /*
444 * The register PCI Buses.
445 */
446 for (unsigned i = 0; i < RT_ELEMENTS(pVM->pdm.s.aPciBuses); i++)
447 {
448 if (pVM->pdm.s.aPciBuses[i].pDevInsRC)
449 {
450 pVM->pdm.s.aPciBuses[i].pDevInsRC += offDelta;
451 pVM->pdm.s.aPciBuses[i].pfnSetIrqRC += offDelta;
452 }
453 }
454
455 /*
456 * Devices.
457 */
458 PCPDMDEVHLPRC pDevHlpRC;
459 int rc = PDMR3LdrGetSymbolRC(pVM, NULL, "g_pdmRCDevHlp", &pDevHlpRC);
460 AssertReleaseMsgRC(rc, ("rc=%Rrc when resolving g_pdmRCDevHlp\n", rc));
461 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
462 {
463 if (pDevIns->pDevReg->fFlags & PDM_DEVREG_FLAGS_RC)
464 {
465 pDevIns->pDevHlpRC = pDevHlpRC;
466 pDevIns->pvInstanceDataRC = MMHyperR3ToRC(pVM, pDevIns->pvInstanceDataR3);
467 pDevIns->Internal.s.pVMRC = pVM->pVMRC;
468 if (pDevIns->Internal.s.pPciBusR3)
469 pDevIns->Internal.s.pPciBusRC = MMHyperR3ToRC(pVM, pDevIns->Internal.s.pPciBusR3);
470 if (pDevIns->Internal.s.pPciDeviceR3)
471 pDevIns->Internal.s.pPciDeviceRC = MMHyperR3ToRC(pVM, pDevIns->Internal.s.pPciDeviceR3);
472 if (pDevIns->pDevReg->pfnRelocate)
473 {
474 LogFlow(("PDMR3Relocate: Relocating device '%s'/%d\n",
475 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
476 pDevIns->pDevReg->pfnRelocate(pDevIns, offDelta);
477 }
478 }
479 }
480}
481
482
483/**
484 * Worker for pdmR3Term that terminates a LUN chain.
485 *
486 * @param pVM Pointer to the shared VM structure.
487 * @param pLun The head of the chain.
488 * @param pszDevice The name of the device (for logging).
489 * @param iInstance The device instance number (for logging).
490 */
491static void pdmR3TermLuns(PVM pVM, PPDMLUN pLun, const char *pszDevice, unsigned iInstance)
492{
493 for (; pLun; pLun = pLun->pNext)
494 {
495 /*
496 * Destroy them one at a time from the bottom up.
497 * (The serial device/drivers depends on this - bad.)
498 */
499 PPDMDRVINS pDrvIns = pLun->pBottom;
500 pLun->pBottom = pLun->pTop = NULL;
501 while (pDrvIns)
502 {
503 PPDMDRVINS pDrvNext = pDrvIns->Internal.s.pUp;
504
505 if (pDrvIns->pDrvReg->pfnDestruct)
506 {
507 LogFlow(("pdmR3DevTerm: Destroying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
508 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pszDevice, iInstance));
509 pDrvIns->pDrvReg->pfnDestruct(pDrvIns);
510 }
511
512 TMR3TimerDestroyDriver(pVM, pDrvIns);
513 //PDMR3QueueDestroyDriver(pVM, pDrvIns);
514 //pdmR3ThreadDestroyDriver(pVM, pDrvIns);
515 SSMR3DeregisterDriver(pVM, pDrvIns, NULL, 0);
516
517 pDrvIns = pDrvNext;
518 }
519 }
520}
521
522
523/**
524 * Terminates the PDM.
525 *
526 * Termination means cleaning up and freeing all resources,
527 * the VM it self is at this point powered off or suspended.
528 *
529 * @returns VBox status code.
530 * @param pVM The VM to operate on.
531 */
532VMMR3DECL(int) PDMR3Term(PVM pVM)
533{
534 LogFlow(("PDMR3Term:\n"));
535 AssertMsg(pVM->pdm.s.offVM, ("bad init order!\n"));
536
537 /*
538 * Iterate the device instances and attach drivers, doing
539 * relevant destruction processing.
540 *
541 * N.B. There is no need to mess around freeing memory allocated
542 * from any MM heap since MM will do that in its Term function.
543 */
544 /* usb ones first. */
545 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
546 {
547 pdmR3TermLuns(pVM, pUsbIns->Internal.s.pLuns, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance);
548
549 if (pUsbIns->pUsbReg->pfnDestruct)
550 {
551 LogFlow(("pdmR3DevTerm: Destroying - device '%s'/%d\n",
552 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
553 pUsbIns->pUsbReg->pfnDestruct(pUsbIns);
554 }
555
556 //TMR3TimerDestroyUsb(pVM, pUsbIns);
557 //SSMR3DeregisterUsb(pVM, pUsbIns, NULL, 0);
558 pdmR3ThreadDestroyUsb(pVM, pUsbIns);
559 }
560
561 /* then the 'normal' ones. */
562 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
563 {
564 pdmR3TermLuns(pVM, pDevIns->Internal.s.pLunsR3, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance);
565
566 if (pDevIns->pDevReg->pfnDestruct)
567 {
568 LogFlow(("pdmR3DevTerm: Destroying - device '%s'/%d\n",
569 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
570 pDevIns->pDevReg->pfnDestruct(pDevIns);
571 }
572
573 TMR3TimerDestroyDevice(pVM, pDevIns);
574 //SSMR3DeregisterDriver(pVM, pDevIns, NULL, 0);
575 pdmR3CritSectDeleteDevice(pVM, pDevIns);
576 //pdmR3ThreadDestroyDevice(pVM, pDevIns);
577 //PDMR3QueueDestroyDevice(pVM, pDevIns);
578 PGMR3PhysMMIO2Deregister(pVM, pDevIns, UINT32_MAX);
579 }
580
581 /*
582 * Destroy all threads.
583 */
584 pdmR3ThreadDestroyAll(pVM);
585
586#ifdef VBOX_WITH_PDM_ASYNC_COMPLETION
587 /*
588 * Free async completion managers.
589 */
590 pdmR3AsyncCompletionTerm(pVM);
591#endif
592
593 /*
594 * Free modules.
595 */
596 pdmR3LdrTermU(pVM->pUVM);
597
598 /*
599 * Destroy the PDM lock.
600 */
601 PDMR3CritSectDelete(&pVM->pdm.s.CritSect);
602
603 LogFlow(("PDMR3Term: returns %Rrc\n", VINF_SUCCESS));
604 return VINF_SUCCESS;
605}
606
607
608/**
609 * Terminates the PDM part of the UVM.
610 *
611 * This will unload any modules left behind.
612 *
613 * @param pUVM Pointer to the user mode VM structure.
614 */
615VMMR3DECL(void) PDMR3TermUVM(PUVM pUVM)
616{
617 /*
618 * In the normal cause of events we will now call pdmR3LdrTermU for
619 * the second time. In the case of init failure however, this might
620 * the first time, which is why we do it.
621 */
622 pdmR3LdrTermU(pUVM);
623}
624
625
626
627
628
629/**
630 * Execute state save operation.
631 *
632 * @returns VBox status code.
633 * @param pVM VM Handle.
634 * @param pSSM SSM operation handle.
635 */
636static DECLCALLBACK(int) pdmR3Save(PVM pVM, PSSMHANDLE pSSM)
637{
638 LogFlow(("pdmR3Save:\n"));
639
640 /*
641 * Save interrupt and DMA states.
642 */
643 for (unsigned idCpu=0;idCpu<pVM->cCPUs;idCpu++)
644 {
645 PVMCPU pVCpu = &pVM->aCpus[idCpu];
646 SSMR3PutUInt(pSSM, VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_APIC));
647 SSMR3PutUInt(pSSM, VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_PIC));
648 }
649 SSMR3PutUInt(pSSM, VM_FF_ISSET(pVM, VM_FF_PDM_DMA));
650
651 /*
652 * Save the list of device instances so we can check that
653 * they're all still there when we load the state and that
654 * nothing new have been added.
655 */
656 /** @todo We might have to filter out some device classes, like USB attached devices. */
657 uint32_t i = 0;
658 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3, i++)
659 {
660 SSMR3PutU32(pSSM, i);
661 SSMR3PutStrZ(pSSM, pDevIns->pDevReg->szDeviceName);
662 SSMR3PutU32(pSSM, pDevIns->iInstance);
663 }
664 return SSMR3PutU32(pSSM, ~0); /* terminator */
665}
666
667
668/**
669 * Prepare state load operation.
670 *
671 * This will dispatch pending operations and clear the FFs governed by PDM and its devices.
672 *
673 * @returns VBox status code.
674 * @param pVM The VM handle.
675 * @param pSSM The SSM handle.
676 */
677static DECLCALLBACK(int) pdmR3LoadPrep(PVM pVM, PSSMHANDLE pSSM)
678{
679 LogFlow(("pdmR3LoadPrep: %s%s%s%s\n",
680 VM_FF_ISSET(pVM, VM_FF_PDM_QUEUES) ? " VM_FF_PDM_QUEUES" : "",
681 VM_FF_ISSET(pVM, VM_FF_PDM_DMA) ? " VM_FF_PDM_DMA" : ""
682 ));
683#ifdef LOG_ENABLED
684 for (unsigned idCpu=0;idCpu<pVM->cCPUs;idCpu++)
685 {
686 PVMCPU pVCpu = &pVM->aCpus[idCpu];
687 LogFlow(("pdmR3LoadPrep: VCPU %d %s%s%s%s\n", idCpu,
688 VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_APIC) ? " VMCPU_FF_INTERRUPT_APIC" : "",
689 VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_PIC) ? " VMCPU_FF_INTERRUPT_PIC" : ""
690 ));
691 }
692#endif
693
694 /*
695 * In case there is work pending that will raise an interrupt,
696 * start a DMA transfer, or release a lock. (unlikely)
697 */
698 if (VM_FF_ISSET(pVM, VM_FF_PDM_QUEUES))
699 PDMR3QueueFlushAll(pVM);
700
701 /* Clear the FFs. */
702 for (unsigned idCpu=0;idCpu<pVM->cCPUs;idCpu++)
703 {
704 PVMCPU pVCpu = &pVM->aCpus[idCpu];
705 VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_INTERRUPT_APIC);
706 VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_INTERRUPT_PIC);
707 }
708 VM_FF_CLEAR(pVM, VM_FF_PDM_DMA);
709
710 return VINF_SUCCESS;
711}
712
713
714/**
715 * Execute state load operation.
716 *
717 * @returns VBox status code.
718 * @param pVM VM Handle.
719 * @param pSSM SSM operation handle.
720 * @param u32Version Data layout version.
721 */
722static DECLCALLBACK(int) pdmR3Load(PVM pVM, PSSMHANDLE pSSM, uint32_t u32Version)
723{
724 int rc;
725
726 LogFlow(("pdmR3Load:\n"));
727
728 /*
729 * Validate version.
730 */
731 if (u32Version != PDM_SAVED_STATE_VERSION)
732 {
733 AssertMsgFailed(("pdmR3Load: Invalid version u32Version=%d!\n", u32Version));
734 return VERR_SSM_UNSUPPORTED_DATA_UNIT_VERSION;
735 }
736
737 /*
738 * Load the interrupt and DMA states.
739 */
740 for (unsigned idCpu=0;idCpu<pVM->cCPUs;idCpu++)
741 {
742 PVMCPU pVCpu = &pVM->aCpus[idCpu];
743
744 /* APIC interrupt */
745 RTUINT fInterruptPending = 0;
746 rc = SSMR3GetUInt(pSSM, &fInterruptPending);
747 if (RT_FAILURE(rc))
748 return rc;
749 if (fInterruptPending & ~1)
750 {
751 AssertMsgFailed(("fInterruptPending=%#x (APIC)\n", fInterruptPending));
752 return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
753 }
754 AssertRelease(!VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_APIC));
755 if (fInterruptPending)
756 VMCPU_FF_SET(pVCpu, VMCPU_FF_INTERRUPT_APIC);
757
758 /* PIC interrupt */
759 fInterruptPending = 0;
760 rc = SSMR3GetUInt(pSSM, &fInterruptPending);
761 if (RT_FAILURE(rc))
762 return rc;
763 if (fInterruptPending & ~1)
764 {
765 AssertMsgFailed(("fInterruptPending=%#x (PIC)\n", fInterruptPending));
766 return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
767 }
768 AssertRelease(!VMCPU_FF_ISSET(pVCpu, VMCPU_FF_INTERRUPT_PIC));
769 if (fInterruptPending)
770 VMCPU_FF_SET(pVCpu, VMCPU_FF_INTERRUPT_PIC);
771 }
772
773 /* DMA pending */
774 RTUINT fDMAPending = 0;
775 rc = SSMR3GetUInt(pSSM, &fDMAPending);
776 if (RT_FAILURE(rc))
777 return rc;
778 if (fDMAPending & ~1)
779 {
780 AssertMsgFailed(("fDMAPending=%#x\n", fDMAPending));
781 return VERR_SSM_DATA_UNIT_FORMAT_CHANGED;
782 }
783 AssertRelease(!VM_FF_ISSET(pVM, VM_FF_PDM_DMA));
784 if (fDMAPending)
785 VM_FF_SET(pVM, VM_FF_PDM_DMA);
786
787 /*
788 * Load the list of devices and verify that they are all there.
789 *
790 * We boldly ASSUME that the order is fixed and that it's a good, this
791 * makes it way easier to validate...
792 */
793 uint32_t i = 0;
794 PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances;
795 for (;;pDevIns = pDevIns->Internal.s.pNextR3, i++)
796 {
797 /* Get the separator / terminator. */
798 uint32_t u32Sep;
799 int rc = SSMR3GetU32(pSSM, &u32Sep);
800 if (RT_FAILURE(rc))
801 return rc;
802 if (u32Sep == (uint32_t)~0)
803 break;
804 if (u32Sep != i)
805 AssertMsgFailedReturn(("Out of seqence. u32Sep=%#x i=%#x\n", u32Sep, i), VERR_SSM_DATA_UNIT_FORMAT_CHANGED);
806
807 /* get the name and instance number. */
808 char szDeviceName[sizeof(pDevIns->pDevReg->szDeviceName)];
809 rc = SSMR3GetStrZ(pSSM, szDeviceName, sizeof(szDeviceName));
810 if (RT_FAILURE(rc))
811 return rc;
812 RTUINT iInstance;
813 rc = SSMR3GetUInt(pSSM, &iInstance);
814 if (RT_FAILURE(rc))
815 return rc;
816
817 /* compare */
818 if (!pDevIns)
819 {
820 LogRel(("Device '%s'/%d not found in current config\n", szDeviceName, iInstance));
821 if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT)
822 AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
823 break;
824 }
825 if ( strcmp(szDeviceName, pDevIns->pDevReg->szDeviceName)
826 || pDevIns->iInstance != iInstance)
827 {
828 LogRel(("u32Sep=%d loaded '%s'/%d configured '%s'/%d\n",
829 u32Sep, szDeviceName, iInstance, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
830 if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT)
831 AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
832 }
833 }
834
835 /*
836 * Too many devices?
837 */
838 if (pDevIns)
839 {
840 LogRel(("Device '%s'/%d not found in saved state\n", pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
841 if (SSMR3HandleGetAfter(pSSM) != SSMAFTER_DEBUG_IT)
842 AssertFailedReturn(VERR_SSM_LOAD_CONFIG_MISMATCH);
843 }
844
845 return VINF_SUCCESS;
846}
847
848
849/**
850 * This function will notify all the devices and their
851 * attached drivers about the VM now being powered on.
852 *
853 * @param pVM VM Handle.
854 */
855VMMR3DECL(void) PDMR3PowerOn(PVM pVM)
856{
857 LogFlow(("PDMR3PowerOn:\n"));
858
859 /*
860 * Iterate the device instances.
861 * The attached drivers are processed first.
862 */
863 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
864 {
865 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsR3; pLun; pLun = pLun->pNext)
866 /** @todo Inverse the order here? */
867 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
868 if (pDrvIns->pDrvReg->pfnPowerOn)
869 {
870 LogFlow(("PDMR3PowerOn: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
871 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
872 pDrvIns->pDrvReg->pfnPowerOn(pDrvIns);
873 }
874
875 if (pDevIns->pDevReg->pfnPowerOn)
876 {
877 LogFlow(("PDMR3PowerOn: Notifying - device '%s'/%d\n",
878 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
879 pDevIns->pDevReg->pfnPowerOn(pDevIns);
880 }
881 }
882
883#ifdef VBOX_WITH_USB
884 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
885 {
886 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
887 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
888 if (pDrvIns->pDrvReg->pfnPowerOn)
889 {
890 LogFlow(("PDMR3PowerOn: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
891 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
892 pDrvIns->pDrvReg->pfnPowerOn(pDrvIns);
893 }
894
895 if (pUsbIns->pUsbReg->pfnVMPowerOn)
896 {
897 LogFlow(("PDMR3PowerOn: Notifying - device '%s'/%d\n",
898 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
899 pUsbIns->pUsbReg->pfnVMPowerOn(pUsbIns);
900 }
901 }
902#endif
903
904 /*
905 * Resume all threads.
906 */
907 pdmR3ThreadResumeAll(pVM);
908
909 LogFlow(("PDMR3PowerOn: returns void\n"));
910}
911
912
913
914
915/**
916 * This function will notify all the devices and their
917 * attached drivers about the VM now being reset.
918 *
919 * @param pVM VM Handle.
920 */
921VMMR3DECL(void) PDMR3Reset(PVM pVM)
922{
923 LogFlow(("PDMR3Reset:\n"));
924
925 /*
926 * Clear all pending interrupts and DMA operations.
927 */
928 for (unsigned idCpu=0;idCpu<pVM->cCPUs;idCpu++)
929 {
930 PVMCPU pVCpu = &pVM->aCpus[idCpu];
931 VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_INTERRUPT_APIC);
932 VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_INTERRUPT_PIC);
933 }
934 VM_FF_CLEAR(pVM, VM_FF_PDM_DMA);
935
936 /*
937 * Iterate the device instances.
938 * The attached drivers are processed first.
939 */
940 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
941 {
942 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsR3; pLun; pLun = pLun->pNext)
943 /** @todo Inverse the order here? */
944 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
945 if (pDrvIns->pDrvReg->pfnReset)
946 {
947 LogFlow(("PDMR3Reset: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
948 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
949 pDrvIns->pDrvReg->pfnReset(pDrvIns);
950 }
951
952 if (pDevIns->pDevReg->pfnReset)
953 {
954 LogFlow(("PDMR3Reset: Notifying - device '%s'/%d\n",
955 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
956 pDevIns->pDevReg->pfnReset(pDevIns);
957 }
958 }
959
960#ifdef VBOX_WITH_USB
961 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
962 {
963 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
964 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
965 if (pDrvIns->pDrvReg->pfnReset)
966 {
967 LogFlow(("PDMR3Reset: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
968 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
969 pDrvIns->pDrvReg->pfnReset(pDrvIns);
970 }
971
972 if (pUsbIns->pUsbReg->pfnVMReset)
973 {
974 LogFlow(("PDMR3Reset: Notifying - device '%s'/%d\n",
975 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
976 pUsbIns->pUsbReg->pfnVMReset(pUsbIns);
977 }
978 }
979#endif
980
981 LogFlow(("PDMR3Reset: returns void\n"));
982}
983
984
985/**
986 * This function will notify all the devices and their
987 * attached drivers about the VM now being reset.
988 *
989 * @param pVM VM Handle.
990 */
991VMMR3DECL(void) PDMR3Suspend(PVM pVM)
992{
993 LogFlow(("PDMR3Suspend:\n"));
994
995 /*
996 * Iterate the device instances.
997 * The attached drivers are processed first.
998 */
999 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
1000 {
1001 /*
1002 * Some devices need to be notified first that the VM is suspended to ensure that that there are no pending
1003 * requests from the guest which are still processed. Calling the drivers before these requests are finished
1004 * might lead to errors otherwise. One example is the SATA controller which might still have I/O requests
1005 * pending. But DrvVD sets the files into readonly mode and every request will fail then.
1006 */
1007 if (pDevIns->pDevReg->pfnSuspend && (pDevIns->pDevReg->fFlags & PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION))
1008 {
1009 LogFlow(("PDMR3Suspend: Notifying - device '%s'/%d\n",
1010 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1011 pDevIns->pDevReg->pfnSuspend(pDevIns);
1012 }
1013
1014 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsR3; pLun; pLun = pLun->pNext)
1015 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
1016 if (pDrvIns->pDrvReg->pfnSuspend)
1017 {
1018 LogFlow(("PDMR3Suspend: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
1019 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1020 pDrvIns->pDrvReg->pfnSuspend(pDrvIns);
1021 }
1022
1023 /* Don't call the suspend notification again if it was already called. */
1024 if (pDevIns->pDevReg->pfnSuspend && !(pDevIns->pDevReg->fFlags & PDM_DEVREG_FLAGS_FIRST_SUSPEND_NOTIFICATION))
1025 {
1026 LogFlow(("PDMR3Suspend: Notifying - device '%s'/%d\n",
1027 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1028 pDevIns->pDevReg->pfnSuspend(pDevIns);
1029 }
1030 }
1031
1032#ifdef VBOX_WITH_USB
1033 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
1034 {
1035 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
1036 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
1037 if (pDrvIns->pDrvReg->pfnSuspend)
1038 {
1039 LogFlow(("PDMR3Suspend: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
1040 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
1041 pDrvIns->pDrvReg->pfnSuspend(pDrvIns);
1042 }
1043
1044 if (pUsbIns->pUsbReg->pfnVMSuspend)
1045 {
1046 LogFlow(("PDMR3Suspend: Notifying - device '%s'/%d\n",
1047 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
1048 pUsbIns->pUsbReg->pfnVMSuspend(pUsbIns);
1049 }
1050 }
1051#endif
1052
1053 /*
1054 * Suspend all threads.
1055 */
1056 pdmR3ThreadSuspendAll(pVM);
1057
1058 LogFlow(("PDMR3Suspend: returns void\n"));
1059}
1060
1061
1062/**
1063 * This function will notify all the devices and their
1064 * attached drivers about the VM now being resumed.
1065 *
1066 * @param pVM VM Handle.
1067 */
1068VMMR3DECL(void) PDMR3Resume(PVM pVM)
1069{
1070 LogFlow(("PDMR3Resume:\n"));
1071
1072 /*
1073 * Iterate the device instances.
1074 * The attached drivers are processed first.
1075 */
1076 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
1077 {
1078 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsR3; pLun; pLun = pLun->pNext)
1079 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
1080 if (pDrvIns->pDrvReg->pfnResume)
1081 {
1082 LogFlow(("PDMR3Resume: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
1083 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1084 pDrvIns->pDrvReg->pfnResume(pDrvIns);
1085 }
1086
1087 if (pDevIns->pDevReg->pfnResume)
1088 {
1089 LogFlow(("PDMR3Resume: Notifying - device '%s'/%d\n",
1090 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1091 pDevIns->pDevReg->pfnResume(pDevIns);
1092 }
1093 }
1094
1095#ifdef VBOX_WITH_USB
1096 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
1097 {
1098 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
1099 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
1100 if (pDrvIns->pDrvReg->pfnResume)
1101 {
1102 LogFlow(("PDMR3Resume: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
1103 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
1104 pDrvIns->pDrvReg->pfnResume(pDrvIns);
1105 }
1106
1107 if (pUsbIns->pUsbReg->pfnVMResume)
1108 {
1109 LogFlow(("PDMR3Resume: Notifying - device '%s'/%d\n",
1110 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
1111 pUsbIns->pUsbReg->pfnVMResume(pUsbIns);
1112 }
1113 }
1114#endif
1115
1116 /*
1117 * Resume all threads.
1118 */
1119 pdmR3ThreadResumeAll(pVM);
1120
1121 LogFlow(("PDMR3Resume: returns void\n"));
1122}
1123
1124
1125/**
1126 * This function will notify all the devices and their
1127 * attached drivers about the VM being powered off.
1128 *
1129 * @param pVM VM Handle.
1130 */
1131VMMR3DECL(void) PDMR3PowerOff(PVM pVM)
1132{
1133 LogFlow(("PDMR3PowerOff:\n"));
1134
1135 /*
1136 * Iterate the device instances.
1137 * The attached drivers are processed first.
1138 */
1139 for (PPDMDEVINS pDevIns = pVM->pdm.s.pDevInstances; pDevIns; pDevIns = pDevIns->Internal.s.pNextR3)
1140 {
1141
1142 if (pDevIns->pDevReg->pfnPowerOff && (pDevIns->pDevReg->fFlags & PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION))
1143 {
1144 LogFlow(("PDMR3PowerOff: Notifying - device '%s'/%d\n",
1145 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1146 pDevIns->pDevReg->pfnPowerOff(pDevIns);
1147 }
1148
1149 for (PPDMLUN pLun = pDevIns->Internal.s.pLunsR3; pLun; pLun = pLun->pNext)
1150 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
1151 if (pDrvIns->pDrvReg->pfnPowerOff)
1152 {
1153 LogFlow(("PDMR3PowerOff: Notifying - driver '%s'/%d on LUN#%d of device '%s'/%d\n",
1154 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1155 pDrvIns->pDrvReg->pfnPowerOff(pDrvIns);
1156 }
1157
1158 if (pDevIns->pDevReg->pfnPowerOff && !(pDevIns->pDevReg->fFlags & PDM_DEVREG_FLAGS_FIRST_POWEROFF_NOTIFICATION))
1159 {
1160 LogFlow(("PDMR3PowerOff: Notifying - device '%s'/%d\n",
1161 pDevIns->pDevReg->szDeviceName, pDevIns->iInstance));
1162 pDevIns->pDevReg->pfnPowerOff(pDevIns);
1163 }
1164 }
1165
1166#ifdef VBOX_WITH_USB
1167 for (PPDMUSBINS pUsbIns = pVM->pdm.s.pUsbInstances; pUsbIns; pUsbIns = pUsbIns->Internal.s.pNext)
1168 {
1169 for (PPDMLUN pLun = pUsbIns->Internal.s.pLuns; pLun; pLun = pLun->pNext)
1170 for (PPDMDRVINS pDrvIns = pLun->pTop; pDrvIns; pDrvIns = pDrvIns->Internal.s.pDown)
1171 if (pDrvIns->pDrvReg->pfnPowerOff)
1172 {
1173 LogFlow(("PDMR3PowerOff: Notifying - driver '%s'/%d on LUN#%d of usb device '%s'/%d\n",
1174 pDrvIns->pDrvReg->szDriverName, pDrvIns->iInstance, pLun->iLun, pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
1175 pDrvIns->pDrvReg->pfnPowerOff(pDrvIns);
1176 }
1177
1178 if (pUsbIns->pUsbReg->pfnVMPowerOff)
1179 {
1180 LogFlow(("PDMR3PowerOff: Notifying - device '%s'/%d\n",
1181 pUsbIns->pUsbReg->szDeviceName, pUsbIns->iInstance));
1182 pUsbIns->pUsbReg->pfnVMPowerOff(pUsbIns);
1183 }
1184 }
1185#endif
1186
1187 /*
1188 * Suspend all threads.
1189 */
1190 pdmR3ThreadSuspendAll(pVM);
1191
1192 LogFlow(("PDMR3PowerOff: returns void\n"));
1193}
1194
1195
1196/**
1197 * Queries the base interace of a device instance.
1198 *
1199 * The caller can use this to query other interfaces the device implements
1200 * and use them to talk to the device.
1201 *
1202 * @returns VBox status code.
1203 * @param pVM VM handle.
1204 * @param pszDevice Device name.
1205 * @param iInstance Device instance.
1206 * @param ppBase Where to store the pointer to the base device interface on success.
1207 * @remark We're not doing any locking ATM, so don't try call this at times when the
1208 * device chain is known to be updated.
1209 */
1210VMMR3DECL(int) PDMR3QueryDevice(PVM pVM, const char *pszDevice, unsigned iInstance, PPDMIBASE *ppBase)
1211{
1212 LogFlow(("PDMR3DeviceQuery: pszDevice=%p:{%s} iInstance=%u ppBase=%p\n", pszDevice, pszDevice, iInstance, ppBase));
1213
1214 /*
1215 * Iterate registered devices looking for the device.
1216 */
1217 size_t cchDevice = strlen(pszDevice);
1218 for (PPDMDEV pDev = pVM->pdm.s.pDevs; pDev; pDev = pDev->pNext)
1219 {
1220 if ( pDev->cchName == cchDevice
1221 && !memcmp(pDev->pDevReg->szDeviceName, pszDevice, cchDevice))
1222 {
1223 /*
1224 * Iterate device instances.
1225 */
1226 for (PPDMDEVINS pDevIns = pDev->pInstances; pDevIns; pDevIns = pDevIns->Internal.s.pPerDeviceNextR3)
1227 {
1228 if (pDevIns->iInstance == iInstance)
1229 {
1230 if (pDevIns->IBase.pfnQueryInterface)
1231 {
1232 *ppBase = &pDevIns->IBase;
1233 LogFlow(("PDMR3DeviceQuery: return VINF_SUCCESS and *ppBase=%p\n", *ppBase));
1234 return VINF_SUCCESS;
1235 }
1236
1237 LogFlow(("PDMR3DeviceQuery: returns VERR_PDM_DEVICE_INSTANCE_NO_IBASE\n"));
1238 return VERR_PDM_DEVICE_INSTANCE_NO_IBASE;
1239 }
1240 }
1241
1242 LogFlow(("PDMR3DeviceQuery: returns VERR_PDM_DEVICE_INSTANCE_NOT_FOUND\n"));
1243 return VERR_PDM_DEVICE_INSTANCE_NOT_FOUND;
1244 }
1245 }
1246
1247 LogFlow(("PDMR3QueryDevice: returns VERR_PDM_DEVICE_NOT_FOUND\n"));
1248 return VERR_PDM_DEVICE_NOT_FOUND;
1249}
1250
1251
1252/**
1253 * Queries the base interface of a device LUN.
1254 *
1255 * This differs from PDMR3QueryLun by that it returns the interface on the
1256 * device and not the top level driver.
1257 *
1258 * @returns VBox status code.
1259 * @param pVM VM Handle.
1260 * @param pszDevice Device name.
1261 * @param iInstance Device instance.
1262 * @param iLun The Logical Unit to obtain the interface of.
1263 * @param ppBase Where to store the base interface pointer.
1264 * @remark We're not doing any locking ATM, so don't try call this at times when the
1265 * device chain is known to be updated.
1266 */
1267VMMR3DECL(int) PDMR3QueryDeviceLun(PVM pVM, const char *pszDevice, unsigned iInstance, unsigned iLun, PPDMIBASE *ppBase)
1268{
1269 LogFlow(("PDMR3QueryLun: pszDevice=%p:{%s} iInstance=%u iLun=%u ppBase=%p\n",
1270 pszDevice, pszDevice, iInstance, iLun, ppBase));
1271
1272 /*
1273 * Find the LUN.
1274 */
1275 PPDMLUN pLun;
1276 int rc = pdmR3DevFindLun(pVM, pszDevice, iInstance, iLun, &pLun);
1277 if (RT_SUCCESS(rc))
1278 {
1279 *ppBase = pLun->pBase;
1280 LogFlow(("PDMR3QueryDeviceLun: return VINF_SUCCESS and *ppBase=%p\n", *ppBase));
1281 return VINF_SUCCESS;
1282 }
1283 LogFlow(("PDMR3QueryDeviceLun: returns %Rrc\n", rc));
1284 return rc;
1285}
1286
1287
1288/**
1289 * Query the interface of the top level driver on a LUN.
1290 *
1291 * @returns VBox status code.
1292 * @param pVM VM Handle.
1293 * @param pszDevice Device name.
1294 * @param iInstance Device instance.
1295 * @param iLun The Logical Unit to obtain the interface of.
1296 * @param ppBase Where to store the base interface pointer.
1297 * @remark We're not doing any locking ATM, so don't try call this at times when the
1298 * device chain is known to be updated.
1299 */
1300VMMR3DECL(int) PDMR3QueryLun(PVM pVM, const char *pszDevice, unsigned iInstance, unsigned iLun, PPDMIBASE *ppBase)
1301{
1302 LogFlow(("PDMR3QueryLun: pszDevice=%p:{%s} iInstance=%u iLun=%u ppBase=%p\n",
1303 pszDevice, pszDevice, iInstance, iLun, ppBase));
1304
1305 /*
1306 * Find the LUN.
1307 */
1308 PPDMLUN pLun;
1309 int rc = pdmR3DevFindLun(pVM, pszDevice, iInstance, iLun, &pLun);
1310 if (RT_SUCCESS(rc))
1311 {
1312 if (pLun->pTop)
1313 {
1314 *ppBase = &pLun->pTop->IBase;
1315 LogFlow(("PDMR3QueryLun: return %Rrc and *ppBase=%p\n", VINF_SUCCESS, *ppBase));
1316 return VINF_SUCCESS;
1317 }
1318 rc = VERR_PDM_NO_DRIVER_ATTACHED_TO_LUN;
1319 }
1320 LogFlow(("PDMR3QueryLun: returns %Rrc\n", rc));
1321 return rc;
1322}
1323
1324/**
1325 * Executes pending DMA transfers.
1326 * Forced Action handler.
1327 *
1328 * @param pVM VM handle.
1329 */
1330VMMR3DECL(void) PDMR3DmaRun(PVM pVM)
1331{
1332 /* Note! Not really SMP safe; restrict it to VCPU 0. */
1333 if (VMMGetCpuId(pVM) != 0)
1334 return;
1335
1336 if (VM_FF_TESTANDCLEAR(pVM, VM_FF_PDM_DMA_BIT))
1337 {
1338 if (pVM->pdm.s.pDmac)
1339 {
1340 bool fMore = pVM->pdm.s.pDmac->Reg.pfnRun(pVM->pdm.s.pDmac->pDevIns);
1341 if (fMore)
1342 VM_FF_SET(pVM, VM_FF_PDM_DMA);
1343 }
1344 }
1345}
1346
1347
1348/**
1349 * Service a VMMCALLHOST_PDM_LOCK call.
1350 *
1351 * @returns VBox status code.
1352 * @param pVM The VM handle.
1353 */
1354VMMR3DECL(int) PDMR3LockCall(PVM pVM)
1355{
1356 return PDMR3CritSectEnterEx(&pVM->pdm.s.CritSect, true /* fHostCall */);
1357}
1358
1359
1360/**
1361 * Registers the VMM device heap
1362 *
1363 * @returns VBox status code.
1364 * @param pVM VM handle.
1365 * @param GCPhys The physical address.
1366 * @param pvHeap Ring-3 pointer.
1367 * @param cbSize Size of the heap.
1368 */
1369VMMR3DECL(int) PDMR3RegisterVMMDevHeap(PVM pVM, RTGCPHYS GCPhys, RTR3PTR pvHeap, unsigned cbSize)
1370{
1371 Assert(pVM->pdm.s.pvVMMDevHeap == NULL);
1372
1373 Log(("PDMR3RegisterVMMDevHeap %RGp %RHv %x\n", GCPhys, pvHeap, cbSize));
1374 pVM->pdm.s.pvVMMDevHeap = pvHeap;
1375 pVM->pdm.s.GCPhysVMMDevHeap = GCPhys;
1376 pVM->pdm.s.cbVMMDevHeap = cbSize;
1377 pVM->pdm.s.cbVMMDevHeapLeft = cbSize;
1378 return VINF_SUCCESS;
1379}
1380
1381
1382/**
1383 * Unregisters the VMM device heap
1384 *
1385 * @returns VBox status code.
1386 * @param pVM VM handle.
1387 * @param GCPhys The physical address.
1388 */
1389VMMR3DECL(int) PDMR3UnregisterVMMDevHeap(PVM pVM, RTGCPHYS GCPhys)
1390{
1391 Assert(pVM->pdm.s.GCPhysVMMDevHeap == GCPhys);
1392
1393 Log(("PDMR3UnregisterVMMDevHeap %RGp\n", GCPhys));
1394 pVM->pdm.s.pvVMMDevHeap = NULL;
1395 pVM->pdm.s.GCPhysVMMDevHeap = NIL_RTGCPHYS;
1396 pVM->pdm.s.cbVMMDevHeap = 0;
1397 pVM->pdm.s.cbVMMDevHeapLeft = 0;
1398 return VINF_SUCCESS;
1399}
1400
1401
1402/**
1403 * Allocates memory from the VMM device heap
1404 *
1405 * @returns VBox status code.
1406 * @param pVM VM handle.
1407 * @param cbSize Allocation size.
1408 * @param pv Ring-3 pointer. (out)
1409 */
1410VMMR3DECL(int) PDMR3VMMDevHeapAlloc(PVM pVM, unsigned cbSize, RTR3PTR *ppv)
1411{
1412#ifdef DEBUG_bird
1413 if (!cbSize || cbSize > pVM->pdm.s.cbVMMDevHeapLeft)
1414 return VERR_NO_MEMORY;
1415#else
1416 AssertReturn(cbSize && cbSize <= pVM->pdm.s.cbVMMDevHeapLeft, VERR_NO_MEMORY);
1417#endif
1418
1419 Log(("PDMR3VMMDevHeapAlloc %x\n", cbSize));
1420
1421 /** @todo not a real heap as there's currently only one user. */
1422 *ppv = pVM->pdm.s.pvVMMDevHeap;
1423 pVM->pdm.s.cbVMMDevHeapLeft = 0;
1424 return VINF_SUCCESS;
1425}
1426
1427
1428/**
1429 * Frees memory from the VMM device heap
1430 *
1431 * @returns VBox status code.
1432 * @param pVM VM handle.
1433 * @param pv Ring-3 pointer.
1434 */
1435VMMR3DECL(int) PDMR3VMMDevHeapFree(PVM pVM, RTR3PTR pv)
1436{
1437 Log(("PDMR3VMMDevHeapFree %RHv\n", pv));
1438
1439 /** @todo not a real heap as there's currently only one user. */
1440 pVM->pdm.s.cbVMMDevHeapLeft = pVM->pdm.s.cbVMMDevHeap;
1441 return VINF_SUCCESS;
1442}
1443
1444/**
1445 * Release the PDM lock if owned by the current VCPU
1446 *
1447 * @param pVM The VM to operate on.
1448 */
1449VMMR3DECL(void) PDMR3ReleaseOwnedLocks(PVM pVM)
1450{
1451 while (PDMCritSectIsOwner(&pVM->pdm.s.CritSect))
1452 PDMCritSectLeave(&pVM->pdm.s.CritSect);
1453}
Note: See TracBrowser for help on using the repository browser.

© 2024 Oracle Support Privacy / Do Not Sell My Info Terms of Use Trademark Policy Automated Access Etiquette