CPUMR0.cpp@ 42046

Last change on this file since 42046 was 42024, checked in by vboxsync, 12 years ago
VMM: RDTSCP support on Intel. Segregated some common CPU features from the AMD superset into Extended features as they're now available on Intel too.
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 28.8 KB

Line
1	/* $Id: CPUMR0.cpp 42024 2012-07-05 12:10:53Z vboxsync $ */
2	/** @file
3	* CPUM - Host Context Ring 0.
4	*/
5
6	/*
7	* Copyright (C) 2006-2011 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18
19	/*******************************************************************************
20	* Header Files *
21	*******************************************************************************/
22	#define LOG_GROUP LOG_GROUP_CPUM
23	#include <VBox/vmm/cpum.h>
24	#include "CPUMInternal.h"
25	#include <VBox/vmm/vm.h>
26	#include <VBox/err.h>
27	#include <VBox/log.h>
28	#include <VBox/vmm/hwaccm.h>
29	#include <iprt/assert.h>
30	#include <iprt/asm-amd64-x86.h>
31	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
32	# include <iprt/mem.h>
33	# include <iprt/memobj.h>
34	# include <VBox/apic.h>
35	#endif
36	#include <iprt/x86.h>
37
38
39	/*******************************************************************************
40	* Structures and Typedefs *
41	*******************************************************************************/
42	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
43	/**
44	* Local APIC mappings.
45	*/
46	typedef struct CPUMHOSTLAPIC
47	{
48	/** Indicates that the entry is in use and have valid data. */
49	bool fEnabled;
50	/** Has APIC_REG_LVT_THMR. Not used. */
51	uint32_t fHasThermal;
52	/** The physical address of the APIC registers. */
53	RTHCPHYS PhysBase;
54	/** The memory object entering the physical address. */
55	RTR0MEMOBJ hMemObj;
56	/** The mapping object for hMemObj. */
57	RTR0MEMOBJ hMapObj;
58	/** The mapping address APIC registers.
59	* @remarks Different CPUs may use the same physical address to map their
60	* APICs, so this pointer is only valid when on the CPU owning the
61	* APIC. */
62	void *pv;
63	} CPUMHOSTLAPIC;
64	#endif
65
66
67	/*******************************************************************************
68	* Global Variables *
69	*******************************************************************************/
70	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
71	static CPUMHOSTLAPIC g_aLApics[RTCPUSET_MAX_CPUS];
72	#endif
73
74
75	/*******************************************************************************
76	* Internal Functions *
77	*******************************************************************************/
78	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
79	static int cpumR0MapLocalApics(void);
80	static void cpumR0UnmapLocalApics(void);
81	#endif
82
83
84	/**
85	* Does the Ring-0 CPU initialization once during module load.
86	* XXX Host-CPU hot-plugging?
87	*/
88	VMMR0DECL(int) CPUMR0ModuleInit(void)
89	{
90	int rc = VINF_SUCCESS;
91	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
92	rc = cpumR0MapLocalApics();
93	#endif
94	return rc;
95	}
96
97
98	/**
99	* Terminate the module.
100	*/
101	VMMR0DECL(int) CPUMR0ModuleTerm(void)
102	{
103	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
104	cpumR0UnmapLocalApics();
105	#endif
106	return VINF_SUCCESS;
107	}
108
109
110	/**
111	* Does Ring-0 CPUM initialization.
112	*
113	* This is mainly to check that the Host CPU mode is compatible
114	* with VBox.
115	*
116	* @returns VBox status code.
117	* @param pVM Pointer to the VM.
118	*/
119	VMMR0DECL(int) CPUMR0Init(PVM pVM)
120	{
121	LogFlow(("CPUMR0Init: %p\n", pVM));
122
123	/*
124	* Check CR0 & CR4 flags.
125	*/
126	uint32_t u32CR0 = ASMGetCR0();
127	if ((u32CR0 & (X86_CR0_PE \| X86_CR0_PG)) != (X86_CR0_PE \| X86_CR0_PG)) /* a bit paranoid perhaps.. */
128	{
129	Log(("CPUMR0Init: PE or PG not set. cr0=%#x\n", u32CR0));
130	return VERR_UNSUPPORTED_CPU_MODE;
131	}
132
133	/*
134	* Check for sysenter and syscall usage.
135	*/
136	if (ASMHasCpuId())
137	{
138	/*
139	* SYSENTER/SYSEXIT
140	*
141	* Intel docs claim you should test both the flag and family, model &
142	* stepping because some Pentium Pro CPUs have the SEP cpuid flag set,
143	* but don't support it. AMD CPUs may support this feature in legacy
144	* mode, they've banned it from long mode. Since we switch to 32-bit
145	* mode when entering raw-mode context the feature would become
146	* accessible again on AMD CPUs, so we have to check regardless of
147	* host bitness.
148	*/
149	uint32_t u32CpuVersion;
150	uint32_t u32Dummy;
151	uint32_t fFeatures;
152	ASMCpuId(1, &u32CpuVersion, &u32Dummy, &u32Dummy, &fFeatures);
153	uint32_t u32Family = u32CpuVersion >> 8;
154	uint32_t u32Model = (u32CpuVersion >> 4) & 0xF;
155	uint32_t u32Stepping = u32CpuVersion & 0xF;
156	if ( (fFeatures & X86_CPUID_FEATURE_EDX_SEP)
157	&& ( u32Family != 6 /* (> pentium pro) */
158	\|\| u32Model >= 3
159	\|\| u32Stepping >= 3
160	\|\| !ASMIsIntelCpu())
161	)
162	{
163	/*
164	* Read the MSR and see if it's in use or not.
165	*/
166	uint32_t u32 = ASMRdMsr_Low(MSR_IA32_SYSENTER_CS);
167	if (u32)
168	{
169	pVM->cpum.s.fHostUseFlags \|= CPUM_USE_SYSENTER;
170	Log(("CPUMR0Init: host uses sysenter cs=%08x%08x\n", ASMRdMsr_High(MSR_IA32_SYSENTER_CS), u32));
171	}
172	}
173
174	/*
175	* SYSCALL/SYSRET
176	*
177	* This feature is indicated by the SEP bit returned in EDX by CPUID
178	* function 0x80000001. Intel CPUs only supports this feature in
179	* long mode. Since we're not running 64-bit guests in raw-mode there
180	* are no issues with 32-bit intel hosts.
181	*/
182	uint32_t cExt = 0;
183	ASMCpuId(0x80000000, &cExt, &u32Dummy, &u32Dummy, &u32Dummy);
184	if ( cExt >= 0x80000001
185	&& cExt <= 0x8000ffff)
186	{
187	uint32_t fExtFeaturesEDX = ASMCpuId_EDX(0x80000001);
188	if (fExtFeaturesEDX & X86_CPUID_EXT_FEATURE_EDX_SYSCALL)
189	{
190	#ifdef RT_ARCH_X86
191	# ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
192	if (fExtFeaturesEDX & X86_CPUID_EXT_FEATURE_EDX_LONG_MODE)
193	# else
194	if (!ASMIsIntelCpu())
195	# endif
196	#endif
197	{
198	uint64_t fEfer = ASMRdMsr(MSR_K6_EFER);
199	if (fEfer & MSR_K6_EFER_SCE)
200	{
201	pVM->cpum.s.fHostUseFlags \|= CPUM_USE_SYSCALL;
202	Log(("CPUMR0Init: host uses syscall\n"));
203	}
204	}
205	}
206	}
207	}
208
209
210	/*
211	* Check if debug registers are armed.
212	* This ASSUMES that DR7.GD is not set, or that it's handled transparently!
213	*/
214	uint32_t u32DR7 = ASMGetDR7();
215	if (u32DR7 & X86_DR7_ENABLED_MASK)
216	{
217	for (VMCPUID i = 0; i < pVM->cCpus; i++)
218	pVM->aCpus[i].cpum.s.fUseFlags \|= CPUM_USE_DEBUG_REGS_HOST;
219	Log(("CPUMR0Init: host uses debug registers (dr7=%x)\n", u32DR7));
220	}
221
222	return VINF_SUCCESS;
223	}
224
225
226	/**
227	* Lazily sync in the FPU/XMM state
228	*
229	* @returns VBox status code.
230	* @param pVM Pointer to the VM.
231	* @param pVCpu Pointer to the VMCPU.
232	* @param pCtx Pointer to the guest CPU context.
233	*/
234	VMMR0DECL(int) CPUMR0LoadGuestFPU(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx)
235	{
236	Assert(pVM->cpum.s.CPUFeatures.edx.u1FXSR);
237	Assert(ASMGetCR4() & X86_CR4_OSFSXR);
238
239	/* If the FPU state has already been loaded, then it's a guest trap. */
240	if (pVCpu->cpum.s.fUseFlags & CPUM_USED_FPU)
241	{
242	Assert( ((pCtx->cr0 & (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS)) == (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS))
243	\|\| ((pCtx->cr0 & (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS)) == (X86_CR0_MP \| X86_CR0_TS)));
244	return VINF_EM_RAW_GUEST_TRAP;
245	}
246
247	/*
248	* There are two basic actions:
249	* 1. Save host fpu and restore guest fpu.
250	* 2. Generate guest trap.
251	*
252	* When entering the hypervisor we'll always enable MP (for proper wait
253	* trapping) and TS (for intercepting all fpu/mmx/sse stuff). The EM flag
254	* is taken from the guest OS in order to get proper SSE handling.
255	*
256	*
257	* Actions taken depending on the guest CR0 flags:
258	*
259	* 3 2 1
260	* TS \| EM \| MP \| FPUInstr \| WAIT :: VMM Action
261	* ------------------------------------------------------------------------
262	* 0 \| 0 \| 0 \| Exec \| Exec :: Clear TS & MP, Save HC, Load GC.
263	* 0 \| 0 \| 1 \| Exec \| Exec :: Clear TS, Save HC, Load GC.
264	* 0 \| 1 \| 0 \| #NM \| Exec :: Clear TS & MP, Save HC, Load GC.
265	* 0 \| 1 \| 1 \| #NM \| Exec :: Clear TS, Save HC, Load GC.
266	* 1 \| 0 \| 0 \| #NM \| Exec :: Clear MP, Save HC, Load GC. (EM is already cleared.)
267	* 1 \| 0 \| 1 \| #NM \| #NM :: Go to guest taking trap there.
268	* 1 \| 1 \| 0 \| #NM \| Exec :: Clear MP, Save HC, Load GC. (EM is already set.)
269	* 1 \| 1 \| 1 \| #NM \| #NM :: Go to guest taking trap there.
270	*/
271
272	switch (pCtx->cr0 & (X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS))
273	{
274	case X86_CR0_MP \| X86_CR0_TS:
275	case X86_CR0_MP \| X86_CR0_EM \| X86_CR0_TS:
276	return VINF_EM_RAW_GUEST_TRAP;
277	default:
278	break;
279	}
280
281	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
282	if (CPUMIsGuestInLongModeEx(pCtx))
283	{
284	Assert(!(pVCpu->cpum.s.fUseFlags & CPUM_SYNC_FPU_STATE));
285
286	/* Save the host state and record the fact (CPUM_USED_FPU \| CPUM_USED_FPU_SINCE_REM). */
287	cpumR0SaveHostFPUState(&pVCpu->cpum.s);
288
289	/* Restore the state on entry as we need to be in 64 bits mode to access the full state. */
290	pVCpu->cpum.s.fUseFlags \|= CPUM_SYNC_FPU_STATE;
291	}
292	else
293	#endif
294	{
295	#ifndef CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE
296	# if defined(VBOX_WITH_HYBRID_32BIT_KERNEL) \|\| defined(VBOX_WITH_KERNEL_USING_XMM) /** @todo remove the #else here and move cpumHandleLazyFPUAsm back to VMMGC after branching out 3.0!!. */
297	Assert(!(pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE));
298	/** @todo Move the FFXR handling down into
299	* cpumR0SaveHostRestoreguestFPUState to optimize the
300	* VBOX_WITH_KERNEL_USING_XMM handling. */
301	/* Clear MSR_K6_EFER_FFXSR or else we'll be unable to save/restore the XMM state with fxsave/fxrstor. */
302	uint64_t SavedEFER = 0;
303	if (pVM->cpum.s.CPUFeaturesExt.edx & X86_CPUID_AMD_FEATURE_EDX_FFXSR)
304	{
305	SavedEFER = ASMRdMsr(MSR_K6_EFER);
306	if (SavedEFER & MSR_K6_EFER_FFXSR)
307	{
308	ASMWrMsr(MSR_K6_EFER, SavedEFER & ~MSR_K6_EFER_FFXSR);
309	pVCpu->cpum.s.fUseFlags \|= CPUM_MANUAL_XMM_RESTORE;
310	}
311	}
312
313	/* Do the job and record that we've switched FPU state. */
314	cpumR0SaveHostRestoreGuestFPUState(&pVCpu->cpum.s);
315
316	/* Restore EFER. */
317	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
318	ASMWrMsr(MSR_K6_EFER, SavedEFER);
319
320	# else
321	uint64_t oldMsrEFERHost = 0;
322	uint32_t oldCR0 = ASMGetCR0();
323
324	/* Clear MSR_K6_EFER_FFXSR or else we'll be unable to save/restore the XMM state with fxsave/fxrstor. */
325	if (pVM->cpum.s.CPUFeaturesExt.edx & X86_CPUID_AMD_FEATURE_EDX_FFXSR)
326	{
327	/** @todo Do we really need to read this every time?? The host could change this on the fly though.
328	* bird: what about starting by skipping the ASMWrMsr below if we didn't
329	* change anything? Ditto for the stuff in CPUMR0SaveGuestFPU. */
330	oldMsrEFERHost = ASMRdMsr(MSR_K6_EFER);
331	if (oldMsrEFERHost & MSR_K6_EFER_FFXSR)
332	{
333	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost & ~MSR_K6_EFER_FFXSR);
334	pVCpu->cpum.s.fUseFlags \|= CPUM_MANUAL_XMM_RESTORE;
335	}
336	}
337
338	/* If we sync the FPU/XMM state on-demand, then we can continue execution as if nothing has happened. */
339	int rc = CPUMHandleLazyFPU(pVCpu);
340	AssertRC(rc);
341	Assert(CPUMIsGuestFPUStateActive(pVCpu));
342
343	/* Restore EFER MSR */
344	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
345	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost);
346
347	/* CPUMHandleLazyFPU could have changed CR0; restore it. */
348	ASMSetCR0(oldCR0);
349	# endif
350
351	#else /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
352
353	/*
354	* Save the FPU control word and MXCSR, so we can restore the state properly afterwards.
355	* We don't want the guest to be able to trigger floating point/SSE exceptions on the host.
356	*/
357	pVCpu->cpum.s.Host.fpu.FCW = CPUMGetFCW();
358	if (pVM->cpum.s.CPUFeatures.edx.u1SSE)
359	pVCpu->cpum.s.Host.fpu.MXCSR = CPUMGetMXCSR();
360
361	cpumR0LoadFPU(pCtx);
362
363	/*
364	* The MSR_K6_EFER_FFXSR feature is AMD only so far, but check the cpuid just in case Intel adds it in the future.
365	*
366	* MSR_K6_EFER_FFXSR changes the behaviour of fxsave and fxrstore: the XMM state isn't saved/restored
367	*/
368	if (pVM->cpum.s.CPUFeaturesExt.edx & X86_CPUID_AMD_FEATURE_EDX_FFXSR)
369	{
370	/** @todo Do we really need to read this every time?? The host could change this on the fly though. */
371	uint64_t msrEFERHost = ASMRdMsr(MSR_K6_EFER);
372
373	if (msrEFERHost & MSR_K6_EFER_FFXSR)
374	{
375	/* fxrstor doesn't restore the XMM state! */
376	cpumR0LoadXMM(pCtx);
377	pVCpu->cpum.s.fUseFlags \|= CPUM_MANUAL_XMM_RESTORE;
378	}
379	}
380
381	#endif /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
382	}
383
384	Assert((pVCpu->cpum.s.fUseFlags & (CPUM_USED_FPU \| CPUM_USED_FPU_SINCE_REM)) == (CPUM_USED_FPU \| CPUM_USED_FPU_SINCE_REM));
385	return VINF_SUCCESS;
386	}
387
388
389	/**
390	* Save guest FPU/XMM state
391	*
392	* @returns VBox status code.
393	* @param pVM Pointer to the VM.
394	* @param pVCpu Pointer to the VMCPU.
395	* @param pCtx Pointer to the guest CPU context.
396	*/
397	VMMR0DECL(int) CPUMR0SaveGuestFPU(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx)
398	{
399	Assert(pVM->cpum.s.CPUFeatures.edx.u1FXSR);
400	Assert(ASMGetCR4() & X86_CR4_OSFSXR);
401	AssertReturn((pVCpu->cpum.s.fUseFlags & CPUM_USED_FPU), VINF_SUCCESS);
402	NOREF(pCtx);
403
404	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
405	if (CPUMIsGuestInLongModeEx(pCtx))
406	{
407	if (!(pVCpu->cpum.s.fUseFlags & CPUM_SYNC_FPU_STATE))
408	{
409	HWACCMR0SaveFPUState(pVM, pVCpu, pCtx);
410	cpumR0RestoreHostFPUState(&pVCpu->cpum.s);
411	}
412	/* else nothing to do; we didn't perform a world switch */
413	}
414	else
415	#endif
416	{
417	#ifndef CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE
418	# ifdef VBOX_WITH_KERNEL_USING_XMM
419	/*
420	* We've already saved the XMM registers in the assembly wrapper, so
421	* we have to save them before saving the entire FPU state and put them
422	* back afterwards.
423	*/
424	/** @todo This could be skipped if MSR_K6_EFER_FFXSR is set, but
425	* I'm not able to test such an optimization tonight.
426	* We could just all this in assembly. */
427	uint128_t aGuestXmmRegs[16];
428	memcpy(&aGuestXmmRegs[0], &pVCpu->cpum.s.Guest.fpu.aXMM[0], sizeof(aGuestXmmRegs));
429	# endif
430
431	/* Clear MSR_K6_EFER_FFXSR or else we'll be unable to save/restore the XMM state with fxsave/fxrstor. */
432	uint64_t oldMsrEFERHost = 0;
433	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
434	{
435	oldMsrEFERHost = ASMRdMsr(MSR_K6_EFER);
436	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost & ~MSR_K6_EFER_FFXSR);
437	}
438	cpumR0SaveGuestRestoreHostFPUState(&pVCpu->cpum.s);
439
440	/* Restore EFER MSR */
441	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
442	ASMWrMsr(MSR_K6_EFER, oldMsrEFERHost \| MSR_K6_EFER_FFXSR);
443
444	# ifdef VBOX_WITH_KERNEL_USING_XMM
445	memcpy(&pVCpu->cpum.s.Guest.fpu.aXMM[0], &aGuestXmmRegs[0], sizeof(aGuestXmmRegs));
446	# endif
447
448	#else /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
449	# ifdef VBOX_WITH_KERNEL_USING_XMM
450	# error "Fix all the NM_TRAPS_IN_KERNEL_MODE code path. I'm not going to fix unused code now."
451	# endif
452	cpumR0SaveFPU(pCtx);
453	if (pVCpu->cpum.s.fUseFlags & CPUM_MANUAL_XMM_RESTORE)
454	{
455	/* fxsave doesn't save the XMM state! */
456	cpumR0SaveXMM(pCtx);
457	}
458
459	/*
460	* Restore the original FPU control word and MXCSR.
461	* We don't want the guest to be able to trigger floating point/SSE exceptions on the host.
462	*/
463	cpumR0SetFCW(pVCpu->cpum.s.Host.fpu.FCW);
464	if (pVM->cpum.s.CPUFeatures.edx.u1SSE)
465	cpumR0SetMXCSR(pVCpu->cpum.s.Host.fpu.MXCSR);
466	#endif /* CPUM_CAN_HANDLE_NM_TRAPS_IN_KERNEL_MODE */
467	}
468
469	pVCpu->cpum.s.fUseFlags &= ~(CPUM_USED_FPU \| CPUM_SYNC_FPU_STATE \| CPUM_MANUAL_XMM_RESTORE);
470	return VINF_SUCCESS;
471	}
472
473
474	/**
475	* Save guest debug state
476	*
477	* @returns VBox status code.
478	* @param pVM Pointer to the VM.
479	* @param pVCpu Pointer to the VMCPU.
480	* @param pCtx Pointer to the guest CPU context.
481	* @param fDR6 Whether to include DR6 or not.
482	*/
483	VMMR0DECL(int) CPUMR0SaveGuestDebugState(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, bool fDR6)
484	{
485	Assert(pVCpu->cpum.s.fUseFlags & CPUM_USE_DEBUG_REGS);
486
487	/* Save the guest's debug state. The caller is responsible for DR7. */
488	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
489	if (CPUMIsGuestInLongModeEx(pCtx))
490	{
491	if (!(pVCpu->cpum.s.fUseFlags & CPUM_SYNC_DEBUG_STATE))
492	{
493	uint64_t dr6 = pCtx->dr[6];
494
495	HWACCMR0SaveDebugState(pVM, pVCpu, pCtx);
496	if (!fDR6) /* dr6 was already up-to-date */
497	pCtx->dr[6] = dr6;
498	}
499	}
500	else
501	#endif
502	{
503	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
504	cpumR0SaveDRx(&pCtx->dr[0]);
505	#else
506	pCtx->dr[0] = ASMGetDR0();
507	pCtx->dr[1] = ASMGetDR1();
508	pCtx->dr[2] = ASMGetDR2();
509	pCtx->dr[3] = ASMGetDR3();
510	#endif
511	if (fDR6)
512	pCtx->dr[6] = ASMGetDR6();
513	}
514
515	/*
516	* Restore the host's debug state. DR0-3, DR6 and only then DR7!
517	* DR7 contains 0x400 right now.
518	*/
519	CPUMR0LoadHostDebugState(pVM, pVCpu);
520	Assert(!(pVCpu->cpum.s.fUseFlags & CPUM_USE_DEBUG_REGS));
521	return VINF_SUCCESS;
522	}
523
524
525	/**
526	* Lazily sync in the debug state
527	*
528	* @returns VBox status code.
529	* @param pVM Pointer to the VM.
530	* @param pVCpu Pointer to the VMCPU.
531	* @param pCtx Pointer to the guest CPU context.
532	* @param fDR6 Whether to include DR6 or not.
533	*/
534	VMMR0DECL(int) CPUMR0LoadGuestDebugState(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, bool fDR6)
535	{
536	/* Save the host state. */
537	CPUMR0SaveHostDebugState(pVM, pVCpu);
538	Assert(ASMGetDR7() == X86_DR7_INIT_VAL);
539
540	/* Activate the guest state DR0-3; DR7 is left to the caller. */
541	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
542	if (CPUMIsGuestInLongModeEx(pCtx))
543	{
544	/* Restore the state on entry as we need to be in 64 bits mode to access the full state. */
545	pVCpu->cpum.s.fUseFlags \|= CPUM_SYNC_DEBUG_STATE;
546	}
547	else
548	#endif
549	{
550	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
551	cpumR0LoadDRx(&pCtx->dr[0]);
552	#else
553	ASMSetDR0(pCtx->dr[0]);
554	ASMSetDR1(pCtx->dr[1]);
555	ASMSetDR2(pCtx->dr[2]);
556	ASMSetDR3(pCtx->dr[3]);
557	#endif
558	if (fDR6)
559	ASMSetDR6(pCtx->dr[6]);
560	}
561
562	pVCpu->cpum.s.fUseFlags \|= CPUM_USE_DEBUG_REGS;
563	return VINF_SUCCESS;
564	}
565
566	/**
567	* Save the host debug state
568	*
569	* @returns VBox status code.
570	* @param pVM Pointer to the VM.
571	* @param pVCpu Pointer to the VMCPU.
572	*/
573	VMMR0DECL(int) CPUMR0SaveHostDebugState(PVM pVM, PVMCPU pVCpu)
574	{
575	NOREF(pVM);
576
577	/* Save the host state. */
578	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
579	AssertCompile((uintptr_t)&pVCpu->cpum.s.Host.dr3 - (uintptr_t)&pVCpu->cpum.s.Host.dr0 == sizeof(uint64_t) * 3);
580	cpumR0SaveDRx(&pVCpu->cpum.s.Host.dr0);
581	#else
582	pVCpu->cpum.s.Host.dr0 = ASMGetDR0();
583	pVCpu->cpum.s.Host.dr1 = ASMGetDR1();
584	pVCpu->cpum.s.Host.dr2 = ASMGetDR2();
585	pVCpu->cpum.s.Host.dr3 = ASMGetDR3();
586	#endif
587	pVCpu->cpum.s.Host.dr6 = ASMGetDR6();
588	/** @todo dr7 might already have been changed to 0x400; don't care right now as it's harmless. */
589	pVCpu->cpum.s.Host.dr7 = ASMGetDR7();
590	/* Make sure DR7 is harmless or else we could trigger breakpoints when restoring dr0-3 (!) */
591	ASMSetDR7(X86_DR7_INIT_VAL);
592
593	return VINF_SUCCESS;
594	}
595
596	/**
597	* Load the host debug state
598	*
599	* @returns VBox status code.
600	* @param pVM Pointer to the VM.
601	* @param pVCpu Pointer to the VMCPU.
602	*/
603	VMMR0DECL(int) CPUMR0LoadHostDebugState(PVM pVM, PVMCPU pVCpu)
604	{
605	Assert(pVCpu->cpum.s.fUseFlags & (CPUM_USE_DEBUG_REGS \| CPUM_USE_DEBUG_REGS_HYPER));
606	NOREF(pVM);
607
608	/*
609	* Restore the host's debug state. DR0-3, DR6 and only then DR7!
610	* DR7 contains 0x400 right now.
611	*/
612	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
613	AssertCompile((uintptr_t)&pVCpu->cpum.s.Host.dr3 - (uintptr_t)&pVCpu->cpum.s.Host.dr0 == sizeof(uint64_t) * 3);
614	cpumR0LoadDRx(&pVCpu->cpum.s.Host.dr0);
615	#else
616	ASMSetDR0(pVCpu->cpum.s.Host.dr0);
617	ASMSetDR1(pVCpu->cpum.s.Host.dr1);
618	ASMSetDR2(pVCpu->cpum.s.Host.dr2);
619	ASMSetDR3(pVCpu->cpum.s.Host.dr3);
620	#endif
621	ASMSetDR6(pVCpu->cpum.s.Host.dr6);
622	ASMSetDR7(pVCpu->cpum.s.Host.dr7);
623
624	pVCpu->cpum.s.fUseFlags &= ~(CPUM_USE_DEBUG_REGS \| CPUM_USE_DEBUG_REGS_HYPER);
625	return VINF_SUCCESS;
626	}
627
628
629	/**
630	* Lazily sync in the hypervisor debug state
631	*
632	* @returns VBox status code.
633	* @param pVM Pointer to the VM.
634	* @param pVCpu Pointer to the VMCPU.
635	* @param pCtx Pointer to the guest CPU context.
636	* @param fDR6 Whether to include DR6 or not.
637	*/
638	VMMR0DECL(int) CPUMR0LoadHyperDebugState(PVM pVM, PVMCPU pVCpu, PCPUMCTX pCtx, bool fDR6)
639	{
640	NOREF(pCtx);
641
642	/* Save the host state. */
643	CPUMR0SaveHostDebugState(pVM, pVCpu);
644	Assert(ASMGetDR7() == X86_DR7_INIT_VAL);
645
646	/* Activate the guest state DR0-3; DR7 is left to the caller. */
647	#if HC_ARCH_BITS == 32 && defined(VBOX_WITH_64_BITS_GUESTS) && !defined(VBOX_WITH_HYBRID_32BIT_KERNEL)
648	if (CPUMIsGuestInLongModeEx(pCtx))
649	{
650	AssertFailed();
651	return VERR_NOT_IMPLEMENTED;
652	}
653	else
654	#endif
655	{
656	#ifdef VBOX_WITH_HYBRID_32BIT_KERNEL
657	AssertFailed();
658	return VERR_NOT_IMPLEMENTED;
659	#else
660	ASMSetDR0(CPUMGetHyperDR0(pVCpu));
661	ASMSetDR1(CPUMGetHyperDR1(pVCpu));
662	ASMSetDR2(CPUMGetHyperDR2(pVCpu));
663	ASMSetDR3(CPUMGetHyperDR3(pVCpu));
664	#endif
665	if (fDR6)
666	ASMSetDR6(CPUMGetHyperDR6(pVCpu));
667	}
668
669	pVCpu->cpum.s.fUseFlags \|= CPUM_USE_DEBUG_REGS_HYPER;
670	return VINF_SUCCESS;
671	}
672
673	#ifdef VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI
674
675	/**
676	* Worker for cpumR0MapLocalApics. Check each CPU for a present Local APIC.
677	* Play safe and treat each CPU separate.
678	*/
679	static DECLCALLBACK(void) cpumR0MapLocalApicWorker(RTCPUID idCpu, void pvUser1, void pvUser2)
680	{
681	NOREF(pvUser1); NOREF(pvUser2);
682	int iCpu = RTMpCpuIdToSetIndex(idCpu);
683	AssertReturnVoid(iCpu >= 0 && (unsigned)iCpu < RT_ELEMENTS(g_aLApics));
684
685	uint32_t u32MaxIdx, u32EBX, u32ECX, u32EDX;
686	ASMCpuId(0, &u32MaxIdx, &u32EBX, &u32ECX, &u32EDX);
687	if ( ( ( u32EBX == X86_CPUID_VENDOR_INTEL_EBX
688	&& u32ECX == X86_CPUID_VENDOR_INTEL_ECX
689	&& u32EDX == X86_CPUID_VENDOR_INTEL_EDX)
690	\|\| ( u32EBX == X86_CPUID_VENDOR_AMD_EBX
691	&& u32ECX == X86_CPUID_VENDOR_AMD_ECX
692	&& u32EDX == X86_CPUID_VENDOR_AMD_EDX))
693	&& u32MaxIdx >= 1)
694	{
695	ASMCpuId(1, &u32MaxIdx, &u32EBX, &u32ECX, &u32EDX);
696	if ( (u32EDX & X86_CPUID_FEATURE_EDX_APIC)
697	&& (u32EDX & X86_CPUID_FEATURE_EDX_MSR))
698	{
699	uint64_t u64ApicBase = ASMRdMsr(MSR_IA32_APICBASE);
700	uint64_t u64Mask = UINT64_C(0x0000000ffffff000);
701
702	/* see Intel Manual: Local APIC Status and Location: MAXPHYADDR default is bit 36 */
703	uint32_t u32MaxExtIdx;
704	ASMCpuId(0x80000000, &u32MaxExtIdx, &u32EBX, &u32ECX, &u32EDX);
705	if ( u32MaxExtIdx >= UINT32_C(0x80000008)
706	&& u32MaxExtIdx < UINT32_C(0x8000ffff))
707	{
708	uint32_t u32PhysBits;
709	ASMCpuId(0x80000008, &u32PhysBits, &u32EBX, &u32ECX, &u32EDX);
710	u32PhysBits &= 0xff;
711	u64Mask = ((UINT64_C(1) << u32PhysBits) - 1) & UINT64_C(0xfffffffffffff000);
712	}
713
714	uint64_t const u64PhysBase = u64ApicBase & u64Mask;
715	g_aLApics[iCpu].PhysBase = (RTHCPHYS)u64PhysBase;
716	g_aLApics[iCpu].fEnabled = g_aLApics[iCpu].PhysBase == u64PhysBase;
717	}
718	}
719	}
720
721
722	/**
723	* Map the MMIO page of each local APIC in the system.
724	*/
725	static int cpumR0MapLocalApics(void)
726	{
727	/*
728	* Check that we'll always stay within the array bounds.
729	*/
730	if (RTMpGetArraySize() > RT_ELEMENTS(g_aLApics))
731	{
732	LogRel(("CPUM: Too many real CPUs/cores/threads - %u, max %u\n", RTMpGetArraySize(), RT_ELEMENTS(g_aLApics)));
733	return VERR_TOO_MANY_CPUS;
734	}
735
736	/*
737	* Create mappings for all online CPUs we think have APICs.
738	*/
739	/** @todo r=bird: This code is not adequately handling CPUs that are
740	* offline or unplugged at init time and later bought into action. */
741	int rc = RTMpOnAll(cpumR0MapLocalApicWorker, NULL, NULL);
742
743	for (unsigned iCpu = 0; RT_SUCCESS(rc) && iCpu < RT_ELEMENTS(g_aLApics); iCpu++)
744	{
745	if (g_aLApics[iCpu].fEnabled)
746	{
747	rc = RTR0MemObjEnterPhys(&g_aLApics[iCpu].hMemObj, g_aLApics[iCpu].PhysBase,
748	PAGE_SIZE, RTMEM_CACHE_POLICY_MMIO);
749	if (RT_SUCCESS(rc))
750	{
751	rc = RTR0MemObjMapKernel(&g_aLApics[iCpu].hMapObj, g_aLApics[iCpu].hMemObj, (void *)-1,
752	PAGE_SIZE, RTMEM_PROT_READ \| RTMEM_PROT_WRITE);
753	if (RT_SUCCESS(rc))
754	{
755	void *pvApicBase = RTR0MemObjAddress(g_aLApics[iCpu].hMapObj);
756
757	/*
758	* 0x0X 82489 external APIC
759	* 0x1X Local APIC
760	* 0x2X..0xFF reserved
761	*/
762	/** @todo r=bird: The local APIC is usually at the same address for all CPUs,
763	* and therefore inaccessible by the other CPUs. */
764	uint32_t ApicVersion = ApicRegRead(pvApicBase, APIC_REG_VERSION);
765	if ((APIC_REG_VERSION_GET_VER(ApicVersion) & 0xF0) == 0x10)
766	{
767	g_aLApics[iCpu].fHasThermal = APIC_REG_VERSION_GET_MAX_LVT(ApicVersion) >= 5;
768	g_aLApics[iCpu].pv = pvApicBase;
769	Log(("CPUM: APIC %02u at %RGp (mapped at %p) - ver %#x, lint0=%#x lint1=%#x pc=%#x thmr=%#x\n",
770	iCpu, g_aLApics[iCpu].PhysBase, g_aLApics[iCpu].pv, ApicVersion,
771	ApicRegRead(pvApicBase, APIC_REG_LVT_LINT0),
772	ApicRegRead(pvApicBase, APIC_REG_LVT_LINT1),
773	ApicRegRead(pvApicBase, APIC_REG_LVT_PC),
774	ApicRegRead(pvApicBase, APIC_REG_LVT_THMR)
775	));
776	continue;
777	}
778
779	RTR0MemObjFree(g_aLApics[iCpu].hMapObj, true /* fFreeMappings */);
780	}
781	RTR0MemObjFree(g_aLApics[iCpu].hMemObj, true /* fFreeMappings */);
782	}
783	g_aLApics[iCpu].fEnabled = false;
784	}
785	}
786	if (RT_FAILURE(rc))
787	{
788	cpumR0UnmapLocalApics();
789	return rc;
790	}
791
792	return VINF_SUCCESS;
793	}
794
795
796	/**
797	* Unmap the Local APIC of all host CPUs.
798	*/
799	static void cpumR0UnmapLocalApics(void)
800	{
801	for (unsigned iCpu = RT_ELEMENTS(g_aLApics); iCpu-- > 0;)
802	{
803	if (g_aLApics[iCpu].pv)
804	{
805	RTR0MemObjFree(g_aLApics[iCpu].hMapObj, true /* fFreeMappings */);
806	RTR0MemObjFree(g_aLApics[iCpu].hMemObj, true /* fFreeMappings */);
807	g_aLApics[iCpu].hMapObj = NIL_RTR0MEMOBJ;
808	g_aLApics[iCpu].hMemObj = NIL_RTR0MEMOBJ;
809	g_aLApics[iCpu].fEnabled = false;
810	g_aLApics[iCpu].pv = NULL;
811	}
812	}
813	}
814
815
816	/**
817	* Write the Local APIC mapping address of the current host CPU to CPUM to be
818	* able to access the APIC registers in the raw mode switcher for disabling/
819	* re-enabling the NMI. Must be called with disabled preemption or disabled
820	* interrupts!
821	*
822	* @param pVM Pointer to the VM.
823	* @param idHostCpu The ID of the current host CPU.
824	*/
825	VMMR0DECL(void) CPUMR0SetLApic(PVM pVM, RTCPUID idHostCpu)
826	{
827	pVM->cpum.s.pvApicBase = g_aLApics[RTMpCpuIdToSetIndex(idHostCpu)].pv;
828	}
829
830	#endif /* VBOX_WITH_VMMR0_DISABLE_LAPIC_NMI */
831

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/VMM/VMMR0/CPUMR0.cpp@ 42046

Download in other formats: