IOM.cpp@ 92719

Last change on this file since 92719 was 92719, checked in by vboxsync, 3 years ago
VMM/IOM: Driverless adjustments to IOM init code running after ring-0 init. bugref:10138
Property svn:eol-style set to `native` Property svn:keywords set to `Id Revision`
File size: 19.4 KB

Line
1	/* $Id: IOM.cpp 92719 2021-12-02 22:40:31Z vboxsync $ */
2	/** @file
3	* IOM - Input / Output Monitor.
4	*/
5
6	/*
7	* Copyright (C) 2006-2020 Oracle Corporation
8	*
9	* This file is part of VirtualBox Open Source Edition (OSE), as
10	* available from http://www.virtualbox.org. This file is free software;
11	* you can redistribute it and/or modify it under the terms of the GNU
12	* General Public License (GPL) as published by the Free Software
13	* Foundation, in version 2 as it comes in the "COPYING" file of the
14	* VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	* hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	*/
17
18
19	/** @page pg_iom IOM - The Input / Output Monitor
20	*
21	* The input/output monitor will handle I/O exceptions routing them to the
22	* appropriate device. It implements an API to register and deregister virtual
23	* I/0 port handlers and memory mapped I/O handlers. A handler is PDM devices
24	* and a set of callback functions.
25	*
26	* @see grp_iom
27	*
28	*
29	* @section sec_iom_rawmode Raw-Mode
30	*
31	* In raw-mode I/O port access is trapped (\#GP(0)) by ensuring that the actual
32	* IOPL is 0 regardless of what the guest IOPL is. The \#GP handler use the
33	* disassembler (DIS) to figure which instruction caused it (there are a number
34	* of instructions in addition to the I/O ones) and if it's an I/O port access
35	* it will hand it to IOMRCIOPortHandler (via EMInterpretPortIO).
36	* IOMRCIOPortHandler will lookup the port in the AVL tree of registered
37	* handlers. If found, the handler will be called otherwise default action is
38	* taken. (Default action is to write into the void and read all set bits.)
39	*
40	* Memory Mapped I/O (MMIO) is implemented as a slightly special case of PGM
41	* access handlers. An MMIO range is registered with IOM which then registers it
42	* with the PGM access handler sub-system. The access handler catches all
43	* access and will be called in the context of a \#PF handler. In RC and R0 this
44	* handler is iomMmioPfHandler while in ring-3 it's iomR3MmioHandler (although
45	* in ring-3 there can be alternative ways). iomMmioPfHandler will attempt to
46	* emulate the instruction that is doing the access and pass the corresponding
47	* reads / writes to the device.
48	*
49	* Emulating I/O port access is less complex and should be slightly faster than
50	* emulating MMIO, so in most cases we should encourage the OS to use port I/O.
51	* Devices which are frequently accessed should register GC handlers to speed up
52	* execution.
53	*
54	*
55	* @section sec_iom_hm Hardware Assisted Virtualization Mode
56	*
57	* When running in hardware assisted virtualization mode we'll be doing much the
58	* same things as in raw-mode. The main difference is that we're running in the
59	* host ring-0 context and that we don't get faults (\#GP(0) and \#PG) but
60	* exits.
61	*
62	*
63	* @section sec_iom_rem Recompiled Execution Mode
64	*
65	* When running in the recompiler things are different. I/O port access is
66	* handled by calling IOMIOPortRead and IOMIOPortWrite directly. While MMIO can
67	* be handled in one of two ways. The normal way is that we have a registered a
68	* special RAM range with the recompiler and in the three callbacks (for byte,
69	* word and dword access) we call IOMMMIORead and IOMMMIOWrite directly. The
70	* alternative ways that the physical memory access which goes via PGM will take
71	* care of it by calling iomR3MmioHandler via the PGM access handler machinery
72	* - this shouldn't happen but it is an alternative...
73	*
74	*
75	* @section sec_iom_other Other Accesses
76	*
77	* I/O ports aren't really exposed in any other way, unless you count the
78	* instruction interpreter in EM, but that's just what we're doing in the
79	* raw-mode \#GP(0) case really. Now, it's possible to call IOMIOPortRead and
80	* IOMIOPortWrite directly to talk to a device, but this is really bad behavior
81	* and should only be done as temporary hacks (the PC BIOS device used to setup
82	* the CMOS this way back in the dark ages).
83	*
84	* MMIO has similar direct routes as the I/O ports and these shouldn't be used
85	* for the same reasons and with the same restrictions. OTOH since MMIO is
86	* mapped into the physical memory address space, it can be accessed in a number
87	* of ways thru PGM.
88	*
89	*
90	* @section sec_iom_logging Logging Levels
91	*
92	* Following assignments:
93	* - Level 5 is used for defering I/O port and MMIO writes to ring-3.
94	*
95	*/
96
97	/** @todo MMIO - simplifying the device end.
98	* - Add a return status for doing DBGFSTOP on access where there are no known
99	* registers.
100	* -
101	*
102	* */
103
104
105	/*********************************************************************************************************************************
106	* Header Files *
107	*********************************************************************************************************************************/
108	#define LOG_GROUP LOG_GROUP_IOM
109	#include <VBox/vmm/iom.h>
110	#include <VBox/vmm/cpum.h>
111	#include <VBox/vmm/pgm.h>
112	#include <VBox/sup.h>
113	#include <VBox/vmm/hm.h>
114	#include <VBox/vmm/mm.h>
115	#include <VBox/vmm/stam.h>
116	#include <VBox/vmm/dbgf.h>
117	#include <VBox/vmm/pdmapi.h>
118	#include <VBox/vmm/pdmdev.h>
119	#include "IOMInternal.h"
120	#include <VBox/vmm/vm.h>
121
122	#include <VBox/param.h>
123	#include <iprt/assert.h>
124	#include <iprt/alloc.h>
125	#include <iprt/string.h>
126	#include <VBox/log.h>
127	#include <VBox/err.h>
128
129
130
131	/**
132	* Initializes the IOM.
133	*
134	* @returns VBox status code.
135	* @param pVM The cross context VM structure.
136	*/
137	VMMR3_INT_DECL(int) IOMR3Init(PVM pVM)
138	{
139	LogFlow(("IOMR3Init:\n"));
140
141	/*
142	* Assert alignment and sizes.
143	*/
144	AssertCompileMemberAlignment(VM, iom.s, 32);
145	AssertCompile(sizeof(pVM->iom.s) <= sizeof(pVM->iom.padding));
146	AssertCompileMemberAlignment(IOM, CritSect, sizeof(uintptr_t));
147
148	/*
149	* Initialize the REM critical section.
150	*/
151	#ifdef IOM_WITH_CRIT_SECT_RW
152	int rc = PDMR3CritSectRwInit(pVM, &pVM->iom.s.CritSect, RT_SRC_POS, "IOM Lock");
153	#else
154	int rc = PDMR3CritSectInit(pVM, &pVM->iom.s.CritSect, RT_SRC_POS, "IOM Lock");
155	#endif
156	AssertRCReturn(rc, rc);
157
158	/*
159	* Register the MMIO access handler type.
160	*/
161	rc = PGMR3HandlerPhysicalTypeRegister(pVM, PGMPHYSHANDLERKIND_MMIO, false /fKeepPgmLock/,
162	iomMmioHandlerNew,
163	NULL, "iomMmioHandlerNew", "iomMmioPfHandlerNew",
164	NULL, "iomMmioHandlerNew", "iomMmioPfHandlerNew",
165	"MMIO New", &pVM->iom.s.hNewMmioHandlerType);
166	AssertRCReturn(rc, rc);
167
168	/*
169	* Info.
170	*/
171	DBGFR3InfoRegisterInternal(pVM, "ioport", "Dumps all IOPort ranges. No arguments.", &iomR3IoPortInfo);
172	DBGFR3InfoRegisterInternal(pVM, "mmio", "Dumps all MMIO ranges. No arguments.", &iomR3MmioInfo);
173
174	/*
175	* Statistics (names are somewhat contorted to make the registration
176	* sub-trees appear at the end of each group).
177	*/
178	STAM_REG(pVM, &pVM->iom.s.StatIoPortCommits, STAMTYPE_COUNTER, "/IOM/IoPortCommits", STAMUNIT_OCCURENCES, "Number of ring-3 I/O port commits.");
179	STAM_REG(pVM, &pVM->iom.s.StatIoPortIn, STAMTYPE_COUNTER, "/IOM/IoPortIN", STAMUNIT_OCCURENCES, "Number of IN instructions (attempts)");
180	STAM_REG(pVM, &pVM->iom.s.StatIoPortInS, STAMTYPE_COUNTER, "/IOM/IoPortINS", STAMUNIT_OCCURENCES, "Number of INS instructions (attempts)");
181	STAM_REG(pVM, &pVM->iom.s.StatIoPortOutS, STAMTYPE_COUNTER, "/IOM/IoPortOUT", STAMUNIT_OCCURENCES, "Number of OUT instructions (attempts)");
182	STAM_REG(pVM, &pVM->iom.s.StatIoPortOutS, STAMTYPE_COUNTER, "/IOM/IoPortOUTS", STAMUNIT_OCCURENCES, "Number of OUTS instructions (attempts)");
183
184	STAM_REG(pVM, &pVM->iom.s.StatMmioHandlerR3, STAMTYPE_COUNTER, "/IOM/MmioHandlerR3", STAMUNIT_OCCURENCES, "Number of calls to iomMmioHandlerNew from ring-3.");
185	STAM_REG(pVM, &pVM->iom.s.StatMmioHandlerR0, STAMTYPE_COUNTER, "/IOM/MmioHandlerR0", STAMUNIT_OCCURENCES, "Number of calls to iomMmioHandlerNew from ring-0.");
186	STAM_REG(pVM, &pVM->iom.s.StatMmioReadsR0ToR3, STAMTYPE_COUNTER, "/IOM/MmioR0ToR3Reads", STAMUNIT_OCCURENCES, "Number of reads deferred to ring-3.");
187	STAM_REG(pVM, &pVM->iom.s.StatMmioWritesR0ToR3, STAMTYPE_COUNTER, "/IOM/MmioR0ToR3Writes", STAMUNIT_OCCURENCES, "Number of writes deferred to ring-3.");
188	STAM_REG(pVM, &pVM->iom.s.StatMmioCommitsR0ToR3,STAMTYPE_COUNTER, "/IOM/MmioR0ToR3Commits", STAMUNIT_OCCURENCES, "Number of commits deferred to ring-3.");
189	STAM_REG(pVM, &pVM->iom.s.StatMmioPfHandler, STAMTYPE_PROFILE, "/IOM/MmioPfHandler", STAMUNIT_TICKS_PER_CALL, "Number of calls to iomMmioPfHandlerNew.");
190	STAM_REG(pVM, &pVM->iom.s.StatMmioPhysHandler, STAMTYPE_PROFILE, "/IOM/MmioPhysHandler", STAMUNIT_TICKS_PER_CALL, "Number of calls to IOMR0MmioPhysHandler.");
191	STAM_REG(pVM, &pVM->iom.s.StatMmioCommitsDirect,STAMTYPE_COUNTER, "/IOM/MmioCommitsDirect", STAMUNIT_OCCURENCES, "Number of ring-3 MMIO commits direct to handler via handle hint.");
192	STAM_REG(pVM, &pVM->iom.s.StatMmioCommitsPgm, STAMTYPE_COUNTER, "/IOM/MmioCommitsPgm", STAMUNIT_OCCURENCES, "Number of ring-3 MMIO commits via PGM.");
193	STAM_REL_REG(pVM, &pVM->iom.s.StatMmioStaleMappings, STAMTYPE_COUNTER, "/IOM/MmioMappingsStale", STAMUNIT_TICKS_PER_CALL, "Number of times iomMmioHandlerNew got a call for a remapped range at the old mapping.");
194	STAM_REG(pVM, &pVM->iom.s.StatMmioDevLockContentionR0, STAMTYPE_COUNTER, "/IOM/MmioDevLockContentionR0", STAMUNIT_OCCURENCES, "Number of device lock contention force return to ring-3.");
195
196	LogFlow(("IOMR3Init: returns VINF_SUCCESS\n"));
197	return VINF_SUCCESS;
198	}
199
200
201	/**
202	* Called when a VM initialization stage is completed.
203	*
204	* @returns VBox status code.
205	* @param pVM The cross context VM structure.
206	* @param enmWhat The initialization state that was completed.
207	*/
208	VMMR3_INT_DECL(int) IOMR3InitCompleted(PVM pVM, VMINITCOMPLETED enmWhat)
209	{
210	#ifdef VBOX_WITH_STATISTICS
211	if (enmWhat == VMINITCOMPLETED_RING0)
212	{
213	/*
214	* Synchronize the ring-3 I/O port and MMIO statistics indices into the
215	* ring-0 tables to simplify ring-0 code. This also make sure that any
216	* later calls to grow the statistics tables will fail.
217	*/
218	if (!SUPR3IsDriverless())
219	{
220	int rc = VMMR3CallR0Emt(pVM, pVM->apCpusR3[0], VMMR0_DO_IOM_SYNC_STATS_INDICES, 0, NULL);
221	AssertLogRelRCReturn(rc, rc);
222	}
223
224	/*
225	* Register I/O port and MMIO stats now that we're done registering MMIO
226	* regions and won't grow the table again.
227	*/
228	for (uint32_t i = 0; i < pVM->iom.s.cIoPortRegs; i++)
229	{
230	PIOMIOPORTENTRYR3 pRegEntry = &pVM->iom.s.paIoPortRegs[i];
231	if ( pRegEntry->fMapped
232	&& pRegEntry->idxStats != UINT16_MAX)
233	iomR3IoPortRegStats(pVM, pRegEntry);
234	}
235
236	for (uint32_t i = 0; i < pVM->iom.s.cMmioRegs; i++)
237	{
238	PIOMMMIOENTRYR3 pRegEntry = &pVM->iom.s.paMmioRegs[i];
239	if ( pRegEntry->fMapped
240	&& pRegEntry->idxStats != UINT16_MAX)
241	iomR3MmioRegStats(pVM, pRegEntry);
242	}
243	}
244	#else
245	RT_NOREF(pVM, enmWhat);
246	#endif
247
248	/*
249	* Freeze I/O port and MMIO registrations.
250	*/
251	pVM->iom.s.fIoPortsFrozen = true;
252	pVM->iom.s.fMmioFrozen = true;
253	return VINF_SUCCESS;
254	}
255
256
257	/**
258	* The VM is being reset.
259	*
260	* @param pVM The cross context VM structure.
261	*/
262	VMMR3_INT_DECL(void) IOMR3Reset(PVM pVM)
263	{
264	RT_NOREF(pVM);
265	}
266
267
268	/**
269	* Applies relocations to data and code managed by this
270	* component. This function will be called at init and
271	* whenever the VMM need to relocate it self inside the GC.
272	*
273	* The IOM will update the addresses used by the switcher.
274	*
275	* @param pVM The cross context VM structure.
276	* @param offDelta Relocation delta relative to old location.
277	*/
278	VMMR3_INT_DECL(void) IOMR3Relocate(PVM pVM, RTGCINTPTR offDelta)
279	{
280	RT_NOREF(pVM, offDelta);
281	}
282
283	/**
284	* Terminates the IOM.
285	*
286	* Termination means cleaning up and freeing all resources,
287	* the VM it self is at this point powered off or suspended.
288	*
289	* @returns VBox status code.
290	* @param pVM The cross context VM structure.
291	*/
292	VMMR3_INT_DECL(int) IOMR3Term(PVM pVM)
293	{
294	/*
295	* IOM is not owning anything but automatically freed resources,
296	* so there's nothing to do here.
297	*/
298	NOREF(pVM);
299	return VINF_SUCCESS;
300	}
301
302
303	/**
304	* Handles the unlikely and probably fatal merge cases.
305	*
306	* @returns Merged status code.
307	* @param rcStrict Current EM status code.
308	* @param rcStrictCommit The IOM I/O or MMIO write commit status to merge
309	* with @a rcStrict.
310	* @param rcIom For logging purposes only.
311	* @param pVCpu The cross context virtual CPU structure of the
312	* calling EMT. For logging purposes.
313	*/
314	DECL_NO_INLINE(static, VBOXSTRICTRC) iomR3MergeStatusSlow(VBOXSTRICTRC rcStrict, VBOXSTRICTRC rcStrictCommit,
315	int rcIom, PVMCPU pVCpu)
316	{
317	if (RT_FAILURE_NP(rcStrict))
318	return rcStrict;
319
320	if (RT_FAILURE_NP(rcStrictCommit))
321	return rcStrictCommit;
322
323	if (rcStrict == rcStrictCommit)
324	return rcStrictCommit;
325
326	AssertLogRelMsgFailed(("rcStrictCommit=%Rrc rcStrict=%Rrc IOPort={%#06x<-%#xx/%u} MMIO={%RGp<-%.*Rhxs} (rcIom=%Rrc)\n",
327	VBOXSTRICTRC_VAL(rcStrictCommit), VBOXSTRICTRC_VAL(rcStrict),
328	pVCpu->iom.s.PendingIOPortWrite.IOPort,
329	pVCpu->iom.s.PendingIOPortWrite.u32Value, pVCpu->iom.s.PendingIOPortWrite.cbValue,
330	pVCpu->iom.s.PendingMmioWrite.GCPhys,
331	pVCpu->iom.s.PendingMmioWrite.cbValue, &pVCpu->iom.s.PendingMmioWrite.abValue[0], rcIom));
332	return VERR_IOM_FF_STATUS_IPE;
333	}
334
335
336	/**
337	* Helper for IOMR3ProcessForceFlag.
338	*
339	* @returns Merged status code.
340	* @param rcStrict Current EM status code.
341	* @param rcStrictCommit The IOM I/O or MMIO write commit status to merge
342	* with @a rcStrict.
343	* @param rcIom Either VINF_IOM_R3_IOPORT_COMMIT_WRITE or
344	* VINF_IOM_R3_MMIO_COMMIT_WRITE.
345	* @param pVCpu The cross context virtual CPU structure of the
346	* calling EMT.
347	*/
348	DECLINLINE(VBOXSTRICTRC) iomR3MergeStatus(VBOXSTRICTRC rcStrict, VBOXSTRICTRC rcStrictCommit, int rcIom, PVMCPU pVCpu)
349	{
350	/* Simple. */
351	if (RT_LIKELY(rcStrict == rcIom \|\| rcStrict == VINF_EM_RAW_TO_R3 \|\| rcStrict == VINF_SUCCESS))
352	return rcStrictCommit;
353
354	if (RT_LIKELY(rcStrictCommit == VINF_SUCCESS))
355	return rcStrict;
356
357	/* EM scheduling status codes. */
358	if (RT_LIKELY( rcStrict >= VINF_EM_FIRST
359	&& rcStrict <= VINF_EM_LAST))
360	{
361	if (RT_LIKELY( rcStrictCommit >= VINF_EM_FIRST
362	&& rcStrictCommit <= VINF_EM_LAST))
363	return rcStrict < rcStrictCommit ? rcStrict : rcStrictCommit;
364	}
365
366	/* Unlikely */
367	return iomR3MergeStatusSlow(rcStrict, rcStrictCommit, rcIom, pVCpu);
368	}
369
370
371	/**
372	* Called by force-flag handling code when VMCPU_FF_IOM is set.
373	*
374	* @returns Merge between @a rcStrict and what the commit operation returned.
375	* @param pVM The cross context VM structure.
376	* @param pVCpu The cross context virtual CPU structure of the calling EMT.
377	* @param rcStrict The status code returned by ring-0 or raw-mode.
378	* @thread EMT(pVCpu)
379	*
380	* @remarks The VMCPU_FF_IOM flag is handled before the status codes by EM, so
381	* we're very likely to see @a rcStrict set to
382	* VINF_IOM_R3_IOPORT_COMMIT_WRITE and VINF_IOM_R3_MMIO_COMMIT_WRITE
383	* here.
384	*/
385	VMMR3_INT_DECL(VBOXSTRICTRC) IOMR3ProcessForceFlag(PVM pVM, PVMCPU pVCpu, VBOXSTRICTRC rcStrict)
386	{
387	VMCPU_FF_CLEAR(pVCpu, VMCPU_FF_IOM);
388	Assert(pVCpu->iom.s.PendingIOPortWrite.cbValue \|\| pVCpu->iom.s.PendingMmioWrite.cbValue);
389
390	if (pVCpu->iom.s.PendingIOPortWrite.cbValue)
391	{
392	Log5(("IOM: Dispatching pending I/O port write: %#x LB %u -> %RTiop\n", pVCpu->iom.s.PendingIOPortWrite.u32Value,
393	pVCpu->iom.s.PendingIOPortWrite.cbValue, pVCpu->iom.s.PendingIOPortWrite.IOPort));
394	STAM_COUNTER_INC(&pVM->iom.s.StatIoPortCommits);
395	VBOXSTRICTRC rcStrictCommit = IOMIOPortWrite(pVM, pVCpu, pVCpu->iom.s.PendingIOPortWrite.IOPort,
396	pVCpu->iom.s.PendingIOPortWrite.u32Value,
397	pVCpu->iom.s.PendingIOPortWrite.cbValue);
398	pVCpu->iom.s.PendingIOPortWrite.cbValue = 0;
399	rcStrict = iomR3MergeStatus(rcStrict, rcStrictCommit, VINF_IOM_R3_IOPORT_COMMIT_WRITE, pVCpu);
400	}
401
402
403	if (pVCpu->iom.s.PendingMmioWrite.cbValue)
404	{
405	Log5(("IOM: Dispatching pending MMIO write: %RGp LB %#x\n",
406	pVCpu->iom.s.PendingMmioWrite.GCPhys, pVCpu->iom.s.PendingMmioWrite.cbValue));
407
408	/* Use new MMIO handle hint and bypass PGM if it still looks right. */
409	size_t idxMmioRegionHint = pVCpu->iom.s.PendingMmioWrite.idxMmioRegionHint;
410	if (idxMmioRegionHint < pVM->iom.s.cMmioRegs)
411	{
412	PIOMMMIOENTRYR3 pRegEntry = &pVM->iom.s.paMmioRegs[idxMmioRegionHint];
413	RTGCPHYS const GCPhysMapping = pRegEntry->GCPhysMapping;
414	RTGCPHYS const offRegion = pVCpu->iom.s.PendingMmioWrite.GCPhys - GCPhysMapping;
415	if (offRegion < pRegEntry->cbRegion && GCPhysMapping != NIL_RTGCPHYS)
416	{
417	STAM_COUNTER_INC(&pVM->iom.s.StatMmioCommitsDirect);
418	VBOXSTRICTRC rcStrictCommit = iomR3MmioCommitWorker(pVM, pVCpu, pRegEntry, offRegion);
419	pVCpu->iom.s.PendingMmioWrite.cbValue = 0;
420	return iomR3MergeStatus(rcStrict, rcStrictCommit, VINF_IOM_R3_MMIO_COMMIT_WRITE, pVCpu);
421	}
422	}
423
424	/* Fall back on PGM. */
425	STAM_COUNTER_INC(&pVM->iom.s.StatMmioCommitsPgm);
426	VBOXSTRICTRC rcStrictCommit = PGMPhysWrite(pVM, pVCpu->iom.s.PendingMmioWrite.GCPhys,
427	pVCpu->iom.s.PendingMmioWrite.abValue, pVCpu->iom.s.PendingMmioWrite.cbValue,
428	PGMACCESSORIGIN_IOM);
429	pVCpu->iom.s.PendingMmioWrite.cbValue = 0;
430	rcStrict = iomR3MergeStatus(rcStrict, rcStrictCommit, VINF_IOM_R3_MMIO_COMMIT_WRITE, pVCpu);
431	}
432
433	return rcStrict;
434	}
435
436
437	/**
438	* Notification from DBGF that the number of active I/O port or MMIO
439	* breakpoints has change.
440	*
441	* For performance reasons, IOM will only call DBGF before doing I/O and MMIO
442	* accesses where there are armed breakpoints.
443	*
444	* @param pVM The cross context VM structure.
445	* @param fPortIo True if there are armed I/O port breakpoints.
446	* @param fMmio True if there are armed MMIO breakpoints.
447	*/
448	VMMR3_INT_DECL(void) IOMR3NotifyBreakpointCountChange(PVM pVM, bool fPortIo, bool fMmio)
449	{
450	/** @todo I/O breakpoints. */
451	RT_NOREF3(pVM, fPortIo, fMmio);
452	}
453
454
455	/**
456	* Notification from DBGF that an event has been enabled or disabled.
457	*
458	* For performance reasons, IOM may cache the state of events it implements.
459	*
460	* @param pVM The cross context VM structure.
461	* @param enmEvent The event.
462	* @param fEnabled The new state.
463	*/
464	VMMR3_INT_DECL(void) IOMR3NotifyDebugEventChange(PVM pVM, DBGFEVENT enmEvent, bool fEnabled)
465	{
466	/** @todo IOM debug events. */
467	RT_NOREF3(pVM, enmEvent, fEnabled);
468	}
469

Note: See TracBrowser for help on using the repository browser.

source: vbox/trunk/src/VBox/VMM/VMMR3/IOM.cpp@ 92719

Download in other formats: