bootsector2-common-init-code.mac@ 60112

Last change on this file since 60112 was 58574, checked in by vboxsync, 9 years ago
bootsector2: map files with all available information.
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 58.3 KB

Line
1	; $Id: bootsector2-common-init-code.mac 58574 2015-11-04 23:25:52Z vboxsync $
2	;; @file
3	; Common bootsector code init.
4	;
5	; In addition to initialize the stack at %7bf0 it loads the first 512KB of the
6	; floppy image at %7c00. The control is handed over with interrupts disabled
7	; to a 'main' function defined by the includer.
8	;
9	; The following defines controls the mode we call main in:
10	; - BS2_INIT_RM (default)
11	; - BS2_INIT_PE32
12	; - BS2_INIT_PP32
13	; - BS2_INIT_PAE32
14	; - BS2_INIT_LM64
15	;
16	; The following defines controls code inclusion:
17	; - BS2_INC_RM
18	; - BS2_INC_PE
19	; - BS2_INC_PE16
20	; - BS2_INC_PE32
21	; - BS2_INC_PEV86
22	; - BS2_INC_PP
23	; - BS2_INC_PP16
24	; - BS2_INC_PP32
25	; - BS2_INC_PPV86
26	; - BS2_INC_PAE
27	; - BS2_INC_PAE16
28	; - BS2_INC_PAE32
29	; - BS2_INC_PAEV86
30	; - BS2_INC_LM
31	; - BS2_INC_LM16
32	; - BS2_INC_LM32
33	; - BS2_INC_LM64
34	; - BS2_INC_CMN_R86
35	; - BS2_INC_CMN_V86
36	; - BS2_INC_CMN_P16
37	; - BS2_INC_CMN_P32
38	; - BS2_INC_CMN_P64
39	; - BS2_WITH_TRAPS
40	;
41
42	;
43	; Copyright (C) 2007-2015 Oracle Corporation
44	;
45	; This file is part of VirtualBox Open Source Edition (OSE), as
46	; available from http://www.virtualbox.org. This file is free software;
47	; you can redistribute it and/or modify it under the terms of the GNU
48	; General Public License (GPL) as published by the Free Software
49	; Foundation, in version 2 as it comes in the "COPYING" file of the
50	; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
51	; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
52	;
53	; The contents of this file may alternatively be used under the terms
54	; of the Common Development and Distribution License Version 1.0
55	; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
56	; VirtualBox OSE distribution, in which case the provisions of the
57	; CDDL are applicable instead of those of the GPL.
58	;
59	; You may elect to license modified versions of this file under the
60	; terms and conditions of either the GPL or the CDDL or both.
61	;
62
63
64	; map files should include symbols and everything.
65	[map all]
66
67	;*******************************************************************************
68	;* Header Files *
69	;*******************************************************************************
70	%include "bootsector2-structures.mac"
71	%include "bootsector2-common-macros-1.mac"
72
73
74	;*******************************************************************************
75	;* Defined Constants And Macros *
76	;*******************************************************************************
77	;; @name Static Memory Allocation
78	; @{
79	;; The boot sector load address.
80	%define BS2_ADDR 07c00h
81	;; The stack is located before the code (and will overflow into the interrupt
82	; table and other essential system data).
83	%define STACK_ADDR (BS2_ADDR - 256)
84
85	%ifdef BS2_WITH_TRAPS
86	;; The address of the ring-0 stack in bs2Tss32BitDf.
87	%define BS2_DF_R0_STACK_ADDR 06800h
88	;; The address of the ring-0 stack in TSSxx.
89	%define BS2_R0_STACK_ADDR 06000h
90	;; The address of the ring-1 stack in TSSxx.
91	%define BS2_R1_STACK_ADDR 05000h
92	;; The address of the ring-2 stack in TSSxx.
93	%define BS2_R2_STACK_ADDR 04800h
94	%endif ; BS2_WITH_TRAPS
95
96	;;
97	; Where we save the boot registers during init.
98	%define BS2_REG_SAVE_ADDR 06000h
99
100	;; The start of the memory area used for paging, stacks and so forth.
101	%define BS2_PXX_BASE 080000h
102
103	;; The page map level 4 address (all entries point to BS2_LM_PDP_ADDR).
104	%define BS2_LM_PML4_ADDR 080000h
105	;; The long mode page directory pointer table address.
106	%define BS2_LM_PDP_ADDR 081000h
107	;; The PAE page directory pointer table address.
108	%define BS2_PAE_PDP_ADDR 082000h
109	;; The address of the 4 PAE page directories. Also used by long mode.
110	%define BS2_PAE_PD_ADDR 083000h
111	;; The address of the 32-bit page directory.
112	%define BS2_32B_PD_ADDR 087000h
113	;; User page table #0.
114	%define BS2_USER_PX_0_ADDR 088000h
115	;; User page table #1.
116	%define BS2_USER_PX_1_ADDR 089000h
117	;; User page table #2.
118	%define BS2_USER_PX_2_ADDR 08a000h
119	;; User page table #3.
120	%define BS2_USER_PX_3_ADDR 08b000h
121	;; User page table #4.
122	%define BS2_USER_PX_4_ADDR 08c000h
123	;; User page table #5.
124	%define BS2_USER_PX_5_ADDR 08d000h
125	;; User page table #6.
126	%define BS2_USER_PX_6_ADDR 08e000h
127	;; User page table #7.
128	%define BS2_USER_PX_7_ADDR 08f000h
129	;; The selector to use when accessing the PDP and PD from real mode.
130	%define BS2_PXX_SEL 08000h
131	;; Converts a BS2_P*_ADDR into a BS2_PXX_SEL selector offset.
132	%define BS2_PXX_OFF(Addr) ( (Addr) - (BS2_PXX_SEL * 16) )
133
134	;; The base address in the default address spaces of the range where we are
135	; free to muck about as much as we like. (This is a virtual address.)
136	%define BS2_MUCK_ABOUT_BASE 000400000h
137
138	; We have some free space here 090000h...09a000h (stacks moved)
139
140	;; The address of the LDT.
141	%define BS2_LDT_BASE 09b000h
142	;; The size of the LDT in bytes.
143	%define BS2_LDT_SIZE 001fffh
144
145	;; The start of the memory area used for paging, stacks and so forth.
146	%define BS2_PXX_LAST 09ffffh
147	;; @}
148
149
150	;;
151	; @name Group of 32-bit, 16-bit and 64-bit selectors for one ring.
152	; @{
153	%define BS2_SEL_GRP_CS32 00h
154	%define BS2_SEL_GRP_DS32 08h
155	%define BS2_SEL_GRP_SS32 10h
156	%define BS2_SEL_GRP_CS16 18h
157	%define BS2_SEL_GRP_DS16 20h
158	%define BS2_SEL_GRP_SS16 28h
159	%define BS2_SEL_GRP_CS64 30h
160	%define BS2_SEL_GRP_DS64 38h
161	%define BS2_SEL_GRP_SS64 38h
162	%define BS2_SEL_GRP_SIZE 40h
163	;; @}
164
165
166	;; Move to program.
167	%ifndef BS2_WITHOUT_RAW_MODE
168	%define BS2_WITH_RAW_MODE
169	%endif
170
171	; Implicit code inclusion based on the init mode.
172	%ifdef BS2_INIT_PE32
173	%define BS2_INC_PE32
174	%elifdef BS2_INIT_PP32
175	%define BS2_INC_PP32
176	%elifdef BS2_INIT_PAE32
177	%define BS2_INC_PAE32
178	%elifdef BS2_INIT_LM64
179	%define BS2_INC_LM64
180	%else
181	%define BS2_INIT_RM ; the default
182	%define BS2_INC_RM
183	%endif
184
185	; Aliases.
186	%ifdef BS2_INC_PE
187	%define BS2_INC_PE16
188	%define BS2_INC_PE32
189	%define BS2_INC_PEV86
190	%endif
191	%ifdef BS2_INC_PP
192	%define BS2_INC_PP16
193	%define BS2_INC_PP32
194	%define BS2_INC_PPV86
195	%endif
196	%ifdef BS2_INC_PAE
197	%define BS2_INC_PAE16
198	%define BS2_INC_PAE32
199	%define BS2_INC_PAEV86
200	%endif
201	%ifdef BS2_INC_LM
202	%define BS2_INC_LM16
203	%define BS2_INC_LM32
204	%define BS2_INC_LM64
205	%endif
206
207	; Common code.
208	%ifdef BS2_INC_RM
209	%define BS2_INC_CMN_R86
210	%endif
211	%ifdef BS2_INC_PE16
212	%define BS2_INC_CMN_P16
213	%define BS2_INC_CMN_PE
214	%define BS2_INC_CMN_PM
215	%endif
216	%ifdef BS2_INC_PE32
217	%define BS2_INC_CMN_P32
218	%define BS2_INC_CMN_PE
219	%define BS2_INC_CMN_PM
220	%endif
221	%ifdef BS2_INC_PEV86
222	%define BS2_INC_CMN_R86
223	%define BS2_INC_CMN_V86
224	%define BS2_INC_CMN_PE
225	%define BS2_INC_CMN_PM
226	%endif
227	%ifdef BS2_INC_PP16
228	%define BS2_INC_CMN_P16
229	%define BS2_INC_CMN_PP
230	%define BS2_INC_CMN_PM
231	%endif
232	%ifdef BS2_INC_PP32
233	%define BS2_INC_CMN_P32
234	%define BS2_INC_CMN_PP
235	%define BS2_INC_CMN_PM
236	%endif
237	%ifdef BS2_INC_PPV86
238	%define BS2_INC_CMN_R86
239	%define BS2_INC_CMN_V86
240	%define BS2_INC_CMN_PP
241	%define BS2_INC_CMN_PM
242	%endif
243	%ifdef BS2_INC_PAE16
244	%define BS2_INC_CMN_P16
245	%define BS2_INC_CMN_PAE
246	%define BS2_INC_CMN_PM
247	%define BS2_INC_CMN_PAE_LM
248	%endif
249	%ifdef BS2_INC_PAE32
250	%define BS2_INC_CMN_P32
251	%define BS2_INC_CMN_PAE
252	%define BS2_INC_CMN_PM
253	%define BS2_INC_CMN_PAE_LM
254	%endif
255	%ifdef BS2_INC_PAEV86
256	%define BS2_INC_CMN_R86
257	%define BS2_INC_CMN_V86
258	%define BS2_INC_CMN_PAE
259	%define BS2_INC_CMN_PM
260	%define BS2_INC_CMN_PAE_LM
261	%endif
262	%ifdef BS2_INC_LM16
263	%define BS2_INC_CMN_P16
264	%define BS2_INC_CMN_LM
265	%define BS2_INC_CMN_PAE_LM
266	%endif
267	%ifdef BS2_INC_LM32
268	%define BS2_INC_CMN_P32
269	%define BS2_INC_CMN_LM
270	%define BS2_INC_CMN_PAE_LM
271	%endif
272	%ifdef BS2_INC_LM64
273	%define BS2_INC_CMN_LM64
274	%define BS2_INC_CMN_LM
275	%define BS2_INC_CMN_PAE_LM
276	%endif
277
278
279	;
280	; Misc defines.
281	;
282	;; The offset of the TSS32.CR3 field.
283	%define BS2_TSS32_CR3_OFF 01ch
284
285
286	;*******************************************************************************
287	;* Structures and Typedefs *
288	;*******************************************************************************
289
290
291	;
292	; Start with a jump just to follow the convention.
293	; Also declare all segments/sections to establish them and their order.
294	;
295	ORG BS2_ADDR
296
297	section .text valign=16 align=16 progbits
298	section .data vfollows=.text follows=.text valign=16 align=16 progbits
299	section .texthigh vfollows=.data follows=.data valign=16 align=16 progbits
300	section .traprecs vfollows=.texthigh follows=.texthigh valign=8 align=8 progbits
301	section .end vfollows=.traprecs follows=.traprecs valign=512 align=512 progbits
302
303	%define BEGINCODELOW section .text ;;< For 16-bit code.
304	%define BEGINCODEHIGH section .texthigh ;;< For 32-bit and 64-bit code.
305	%define BEGINEND section .end ;;< For aligning image to 512 bytes.
306
307	BEGINCODELOW
308	BITS 16
309	start:
310	jmp short bs2InitCode
311	nop
312	nop ; alignment
313
314	;
315	; Abuse the bios parameter block area for data storage.
316	;
317	gdtr:
318	dw bs2GdtEnd - bs2Gdt - 1 ; limit 15:00
319	dw bs2Gdt ; base 15:00
320	db 0 ; base 23:16
321	db 0 ; unused
322
323	idtr_null:
324	dw 0 ; limit 15:00
325	dw bs2Gdt ; base 15:00
326	db 0 ; base 23:16
327	db 0 ; unused
328
329	%ifdef BS2_WITH_TRAPS
330	%ifdef BS2_INC_CMN_PM
331	idtr_32bit:
332	dw bs2Idt32bitEnd - bs2Idt32bit -1 ; limit 15:00
333	dw bs2Idt32bit ; base 15:00
334	db 0 ; base 23:16
335	db 0 ; unused
336	%endif
337
338	%ifdef BS2_INC_CMN_LM
339	idtr_64bit:
340	dw bs2Idt64bitEnd - bs2Idt64bit -1 ; limit 15:00
341	dw bs2Idt64bit ; base 15:00
342	db 0 ; base 23:16
343	db 0 ; unused
344	%endif
345
346	%elifdef BS2_WITH_RAW_MODE
347	idtr_dummy_32bit:
348	dw bs2DummyIdt32bitEnd - bs2DummyIdt32bit -1 ; limit 15:00
349	dw bs2DummyIdt32bit ; base 15:00
350	db 0 ; base 23:16
351	db 0 ; unused
352	%endif
353
354	idtr_real_mode:
355	dw 01ffh ; limit 15:00
356	dw 0 ; base 15:00
357	db 0 ; base 23:16
358	db 0 ; unused
359
360	g_achHex:
361	db '0123456789abcdef', 0
362
363	g_bBootDrv:
364	db 80h ; Not in the official BPB location, but whatever.
365	g_fCpuIntel:
366	db 0
367	g_fCpuAmd:
368	db 0
369
370	bs2BpbPadding:
371	times 3dh - (bs2BpbPadding - start) db 0
372
373
374	;
375	; Where to real init code starts.
376	;
377	bs2InitCode:
378	cli
379
380	%ifdef BS2_INIT_SAVE_REGS
381	; save the registers if we've been asked to do so.
382	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.rax], eax
383	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.rsp], esp
384	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.rbp], ebp
385	mov ax, ss
386	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.ss], ax
387	mov ax, ds
388	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.ds], ax
389	mov ax, es
390	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.es], ax
391	mov ax, fs
392	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.fs], ax
393	mov ax, gs
394	%endif
395
396	; set up the segment reisters and stack.
397	xor eax, eax
398	mov ds, ax
399	mov es, ax
400	mov fs, ax
401	mov gs, ax
402	mov ss, ax
403	mov esp, STACK_ADDR
404	mov [esp], eax ; clear the first 16 bytes
405	mov [esp + 04h], eax
406	mov [esp + 08h], eax ; fake rbp.
407	mov [esp + 0ch], eax ; fake ebp and bp
408	mov ebp, esp
409
410	%ifdef BS2_INIT_SAVE_REGS
411	; Save more registers now that ds is known and the stack is usable.
412	pushfd
413	pop eax
414	mov [BS2_REG_SAVE_ADDR + BS2REGS.rflags], eax
415	mov [BS2_REG_SAVE_ADDR + BS2REGS.rbx], ebx
416	mov [BS2_REG_SAVE_ADDR + BS2REGS.rcx], ecx
417	mov [BS2_REG_SAVE_ADDR + BS2REGS.rdx], edx
418	mov [BS2_REG_SAVE_ADDR + BS2REGS.rsi], esi
419	mov [BS2_REG_SAVE_ADDR + BS2REGS.rdi], edi
420	%endif
421
422	; Make sure caching is enabled and alignment is off.
423	mov eax, cr0
424	%ifdef BS2_INIT_SAVE_REGS
425	mov [BS2_REG_SAVE_ADDR + BS2REGS.cr0], eax
426	%endif
427	and eax, ~(X86_CR0_NW \| X86_CR0_CD \| X86_CR0_AM)
428	mov cr0, eax
429
430	; Load all the code.
431	call bs2InitLoadImage
432	mov [g_bBootDrv], dl
433
434	; Initialize the data structures for the included modes requiring this.
435	%ifdef BS2_INC_CMN_PP
436	call bs2InitPagedProtMode
437	%endif
438	%ifdef BS2_INC_CMN_PAE
439	call bs2InitPaeProtMode
440	%endif
441	%ifdef BS2_INC_CMN_LM
442	call bs2InitLongMode
443	%endif
444
445	; Entered the desired mode.
446	%ifdef BS2_INIT_PE32
447	call Bs2EnterMode_rm_pe32
448	BITS 32
449	%endif
450	%ifdef BS2_INIT_PP32
451	call Bs2EnterMode_rm_pp32
452	BITS 32
453	%endif
454	%ifdef BS2_INIT_PAE32
455	call Bs2EnterMode_rm_pae32
456	BITS 32
457	%endif
458	%ifdef BS2_INIT_LM64
459	call Bs2EnterMode_rm_lm64
460	BITS 64
461	%endif
462	%ifdef BS2_INIT_RM
463	call SetCpuModeGlobals_rm
464	%endif
465
466	%ifdef BS2_WITH_RAW_MODE
467	;
468	; Mask interrupts and then set IF.
469	;
470	mov al, 0ffh
471	out 021h, al
472	out 0a1h, al
473	sti
474	%endif
475
476	jmp bs2DoneInit
477
478
479	;;
480	; Loads the image off the floppy.
481	;
482	; This uses the the_end label to figure out the length. For this to work
483	; cleanly the label must be aligned on a sector boundrary. Use BS2_PAD_IMAGE
484	; to make sure this is the case.
485	;
486	; Clobbers everything except ebp and esp. Panics on failure.
487	;
488	; @param dl The boot drive number (from BIOS).
489	; @uses ax, cx, bx, esi, di
490	;
491	BEGINCODELOW
492	BITS 16
493	BEGINPROC bs2InitLoadImage
494	push bp
495	mov bp, sp
496	push es
497	%define bSavedDiskNo byte [bp - 04h]
498	push dx
499	%define bMaxSector byte [bp - 06h]
500	push 0
501	%define bMaxHead byte [bp - 08h]
502	push 0
503	%define bMaxCylinder byte [bp - 0ah]
504	push 0
505
506	;
507	; Try figure the geometry.
508	;
509	mov ah, 08h
510	int 13h
511	jc .failure
512	mov bMaxSector, cl
513	mov bMaxHead, dh
514	mov bMaxCylinder, ch
515	mov dl, bSavedDiskNo
516
517	;
518	; Reload all the sectors one at a time (avoids problems).
519	;
520	lea esi, [dword the_end]
521	sub esi, start
522	shr esi, 9 ; si = number of sectors to load.
523	mov di, BS2_ADDR / 16 ; The current load segment.
524	mov cx, 0001h ; ch/cylinder=0 (0-based); cl/sector=1 (1-based)
525	xor dh, dh ; dh/head=0
526	.the_load_loop:
527	xor bx, bx
528	mov es, di ; es:bx -> buffer
529	mov ax, 0201h ; al=1 sector; ah=read function
530	int 13h
531	jc .failure
532
533	; advance to the next sector/head/cylinder.
534	inc cl
535	cmp cl, bMaxSector
536	jbe .adv_addr
537
538	mov cl, 1
539	inc dh
540	cmp dh, bMaxHead
541	jbe .adv_addr
542
543	mov dh, 0
544	inc ch
545
546	.adv_addr:
547	add di, 512 / 16
548	dec si
549	jnz .the_load_loop
550
551	add sp, 3*2
552	pop dx
553	pop es
554	leave
555	ret
556
557	;
558	; Something went wrong, display a message.
559	;
560	.failure:
561	pusha
562
563	; print message
564	mov si, .s_szErrMsg
565	mov ah, 0eh
566	xor bx, bx
567	.failure_next_char:
568	lodsb
569	int 10h
570	cmp si, .s_szErrMsgEnd
571	jb .failure_next_char
572
573	; format the error number.
574	movzx bx, byte [bp - 2 - 1] ; read the ah of the pusha frame
575	shr bl, 4
576	mov al, [bx + g_achHex]
577	int 10h
578
579	movzx bx, byte [bp - 2 - 1] ; read the ah of the pusha frame
580	and bl, 0fh
581	mov al, [bx + g_achHex]
582	int 10h
583
584	; panic
585	popa
586	call Bs2Panic
587	.s_szErrMsg:
588	db 13, 10, 'read error: '
589	.s_szErrMsgEnd:
590	ENDPROC bs2InitLoadImage
591
592	;; Pads the image so bs2InitLoadImage can load it without trouble.
593	%macro BS2_PAD_IMAGE 0
594	bs2PadImageLabel:
595	; times ( (512182) - ( (bs2PadImageLabel - start) % (512182) ) ) db 0 ; track aligned size.
596	times ( 512 - ( (bs2PadImageLabel - start) % 512 ) ) db 0 ; sector aligned size.
597	; times ( 10000h - BS2_ADDR - (bs2PadImageLabel - start) ) db 0 ; full segment 0 size.
598	%endmacro
599
600
601	;;
602	; Shutdown routine that will work in real and protected mode, providing
603	; that SS is valid that we can load it into DS.
604	;
605	; Does not return.
606	;
607	BEGINCODELOW
608	BITS 16
609	BEGINPROC Bs2Shutdown
610	cli
611	mov bl, 64
612	mov dx, 08900h
613	mov ax, ss
614	mov ds, ax
615	.retry:
616	mov ecx, 8
617	mov esi, .s_szShutdown
618	rep outsb
619	dec bl
620	jnz .retry
621	; Shutdown failed!
622	jmp Bs2Panic
623	.s_szShutdown:
624	db 'Shutdown', 0
625	ENDPROC Bs2Shutdown
626
627
628	;;
629	; Panic routine for real mode.
630	;
631	; Does not return.
632	;
633	BEGINCODELOW
634	BITS 16
635	BEGINPROC Bs2Panic
636	cli
637	.hlt_again:
638	hlt
639	jmp .hlt_again
640	ENDPROC Bs2Panic
641
642
643	;
644	; Padd the remainder of the sector with zeros and
645	; end it with the dos signature.
646	;
647	bs2Padding:
648	times 510 - (bs2Padding - start) db 0
649	db 055h, 0aah
650
651
652	;
653	; The GDT (X86DESCGENERIC).
654	;
655	align 8, db 0
656	bs2Gdt:
657	dw 00000h, 00000h, 00000h, 00000h ; null selector
658	%define BS2_SEL_R0_BASE 08h
659	%define BS2_SEL_CS32 08h
660	dw 0ffffh, 00000h, 09b00h, 000cfh ; 32-bit flat code segment.
661	%define BS2_SEL_DS32 10h
662	dw 0ffffh, 00000h, 09300h, 000cfh ; 32-bit flat data segment.
663	%define BS2_SEL_SS32 18h
664	dw 0ffffh, 00000h, 09300h, 000cfh ; 32-bit flat stack segment.
665	%define BS2_SEL_CS16 20h
666	dw 0ffffh, 00000h, 09b00h, 00000h ; 16-bit code segment with base 0.
667	%define BS2_SEL_DS16 28h
668	dw 0ffffh, 00000h, 09300h, 00000h ; 16-bit data segment with base 0.
669	%define BS2_SEL_SS16 30h
670	dw 0ffffh, 00000h, 09300h, 00000h ; 16-bit stack segment with base 0.
671	%define BS2_SEL_CS64 38h
672	dw 0ffffh, 00000h, 09a00h, 000afh ; 64-bit code segment.
673	%define BS2_SEL_DS64 40h
674	%define BS2_SEL_SS64 40h
675	dw 0ffffh, 00000h, 09300h, 000afh ; 64-bit stack and data segment.
676	dw 00000h, 00000h, 00000h, 00000h ; Unused
677	%define BS2_SEL_MMIO16 50h
678	%define BS2_SEL_MMIO16_BASE 0100000h
679	dw 0ffffh, 00000h, 09310h, 00000h ; 16-bit VMMDev MMIO segment with base 0100000h.
680	dw 00000h, 00000h, 00000h, 00000h ; Unused
681	%define BS2_SEL_LDT 60h ; LDT usage requires manual LLDT and setting up.
682	dw BS2_LDT_SIZE, BS2_LDT_BASE & 0xffff, 08200h \| ((BS2_LDT_BASE >> 16) & 0xff), 00000h
683	dw 00000h, 00000h, 00000h, 00000h ; zero for 64-bit mode.
684	%define BS2_SEL_CS16_EO 70h
685	dw 0fffeh, 00000h, 09800h, 00000h ; 16-bit code segment with base 0, not accessed, execute only, short limit.
686	dw 00000h, 00000h, 00000h, 00000h ; unused.
687	%ifdef BS2_WITH_TRAPS
688	%ifdef BS2_INC_CMN_PM
689	%define BS2_SEL_TSS32 80h
690	dw (bs2Tss32BitEnd - bs2Tss32Bit) - 1 ; 32-bit TSS.
691	dw bs2Tss32Bit
692	db 0
693	db X86_SEL_TYPE_SYS_386_TSS_AVAIL \| 0x80
694	dw 0
695	%define BS2_SEL_TSS32_DF 88h
696	dw (bs2Tss32BitDfEnd - bs2Tss32BitDf) - 1; 32-bit TSS, double fault.
697	dw bs2Tss32BitDf
698	db 0
699	db X86_SEL_TYPE_SYS_386_TSS_AVAIL \| 0x80
700	dw 0
701	%else
702	dw 00000h, 00000h, 00000h, 00000h
703	dw 00000h, 00000h, 00000h, 00000h
704	%endif
705	%ifdef BS2_INC_CMN_LM
706	%define BS2_SEL_TSS64 90h
707	dw (bs2Tss64BitEnd - bs2Tss64Bit) - 1 ; 32-bit TSS.
708	dw bs2Tss64Bit
709	db 0
710	db AMD64_SEL_TYPE_SYS_TSS_AVAIL \| 0x80
711	dw 0
712	dw 00000h, 00000h, 00000h, 00000h ; 2nd half of the 64-bit selector (not necessary).
713	%else
714	dw 00000h, 00000h, 00000h, 00000h
715	dw 00000h, 00000h, 00000h, 00000h
716	%endif
717	%endif
718	; Ring-1 selectors.
719	%define BS2_SEL_R1_BASE 0a0h
720	%define BS2_SEL_R1_CS32 0a0h
721	dw 0ffffh, 00000h, 0bb00h, 000cfh ; Ring-1 32-bit flat code segment.
722	%define BS2_SEL_R1_DS32 0a8h
723	dw 0ffffh, 00000h, 0b300h, 000cfh ; Ring-1 32-bit flat data segment.
724	%define BS2_SEL_R1_SS32 0b0h
725	dw 0ffffh, 00000h, 0b300h, 000cfh ; Ring-1 32-bit flat stack segment.
726	%define BS2_SEL_R1_CS16 0b8h
727	dw 0ffffh, 00000h, 0bb00h, 00000h ; Ring-1 16-bit code segment with base 0.
728	%define BS2_SEL_R1_DS16 0c0h
729	dw 0ffffh, 00000h, 0b300h, 00000h ; Ring-1 16-bit data segment with base 0.
730	%define BS2_SEL_R1_SS16 0c8h
731	dw 0ffffh, 00000h, 0b300h, 00000h ; Ring-1 16-bit stack segment with base 0.
732	%define BS2_SEL_R1_CS64 0d0h
733	dw 0ffffh, 00000h, 0ba00h, 000afh ; Ring-1 64-bit code segment.
734	%define BS2_SEL_R1_DS64 0d8h
735	%define BS2_SEL_R1_SS64 0d8h
736	dw 0ffffh, 00000h, 0b300h, 000afh ; Ring-1 64-bit stack and data segment.
737
738	; Ring-2 selectors.
739	%define BS2_SEL_R2_BASE 0e0h
740	%define BS2_SEL_R2_CS32 0e0h
741	dw 0ffffh, 00000h, 0db00h, 000cfh ; Ring-2 32-bit flat code segment.
742	%define BS2_SEL_R2_DS32 0e8h
743	dw 0ffffh, 00000h, 0d300h, 000cfh ; Ring-2 32-bit flat data segment.
744	%define BS2_SEL_R2_SS32 0f0h
745	dw 0ffffh, 00000h, 0d300h, 000cfh ; Ring-2 32-bit flat stack segment.
746	%define BS2_SEL_R2_CS16 0f8h
747	dw 0ffffh, 00000h, 0db00h, 00000h ; Ring-2 16-bit code segment with base 0.
748	%define BS2_SEL_R2_DS16 0f0h
749	dw 0ffffh, 00000h, 0d300h, 00000h ; Ring-2 16-bit data segment with base 0.
750	%define BS2_SEL_R2_SS16 108h
751	dw 0ffffh, 00000h, 0d300h, 00000h ; Ring-2 16-bit stack segment with base 0.
752	%define BS2_SEL_R2_CS64 110h
753	dw 0ffffh, 00000h, 0da00h, 000afh ; Ring-2 64-bit code segment.
754	%define BS2_SEL_R2_DS64 118h
755	%define BS2_SEL_R2_SS64 118h
756	dw 0ffffh, 00000h, 0d300h, 000afh ; Ring-2 64-bit stack and data segment.
757
758	; Ring-3 selectors.
759	%define BS2_SEL_R3_BASE 120h
760	%define BS2_SEL_R3_CS32 120h
761	dw 0ffffh, 00000h, 0fb00h, 000cfh ; Ring-3 32-bit flat code segment.
762	%define BS2_SEL_R3_DS32 128h
763	dw 0ffffh, 00000h, 0f300h, 000cfh ; Ring-3 32-bit flat data segment.
764	%define BS2_SEL_R3_SS32 130h
765	dw 0ffffh, 00000h, 0f300h, 000cfh ; Ring-3 32-bit flat stack segment.
766	%define BS2_SEL_R3_CS16 138h
767	dw 0ffffh, 00000h, 0fb00h, 00000h ; Ring-3 16-bit code segment with base 0.
768	%define BS2_SEL_R3_DS16 140h
769	dw 0ffffh, 00000h, 0f300h, 00000h ; Ring-3 16-bit data segment with base 0.
770	%define BS2_SEL_R3_SS16 148h
771	dw 0ffffh, 00000h, 0f300h, 00000h ; Ring-3 16-bit stack segment with base 0.
772	%define BS2_SEL_R3_CS64 150h
773	dw 0ffffh, 00000h, 0fa00h, 000afh ; Ring-1 64-bit code segment.
774	%define BS2_SEL_R3_DS64 158h
775	%define BS2_SEL_R3_SS64 158h
776	dw 0ffffh, 00000h, 0f300h, 000afh ; Ring-1 64-bit stack and data segment.
777
778	; Here follows a bunch of spare GDT entries for (ab)use in testing.
779	%define BS2_SEL_SPARE0 160h
780	bs2GdtSpare0:
781	dq 0
782	%define BS2_SEL_SPARE1 (BS2_SEL_SPARE0 + 08h)
783	bs2GdtSpare1:
784	dq 0
785	%define BS2_SEL_SPARE2 (BS2_SEL_SPARE0 + 10h)
786	bs2GdtSpare2:
787	dq 0
788	%define BS2_SEL_SPARE3 (BS2_SEL_SPARE0 + 18h)
789	bs2GdtSpare3:
790	dq 0
791	bs2GdtEnd:
792
793
794	%ifndef BS2_WITH_TRAPS
795	%ifdef BS2_WITH_RAW_MODE
796	;
797	; Dummy 32-bit IDT for making CSAM happy.
798	;
799	align 16, db 0
800	bs2DummyIdt32bit:
801	dw 0, 0, 0, 0
802	dw 0, 0, 0, 0
803	dw 0, 0, 0, 0
804	dw 0, 0, 0, 0
805	bs2DummyIdt32bitEnd
806	%endif
807	%endif
808
809
810	;
811	; Mode initialization routines.
812	;
813
814	%ifdef BS2_INC_CMN_PP
815	;;
816	; Initializes the paged protected mode structures during init.
817	;
818	; @uses ebx, esi
819	;
820	BEGINCODELOW
821	BITS 16
822	BEGINPROC bs2InitPagedProtMode
823	push ds
824
825	;
826	; Create a paging hierarchy
827	;
828	mov bx, BS2_PXX_SEL
829	mov ds, bx
830	mov ebx, BS2_PXX_OFF(BS2_32B_PD_ADDR)
831	xor esi, esi ; physical address
832
833	; The page directory.
834	.pd_loop:
835	mov dword [bx], esi
836	or word [bx], X86_PDE4M_P \| X86_PDE4M_RW \| X86_PDE4M_PS \| X86_PDE4M_US
837	add esi, _4M
838	add bx, 4
839	test bx, 0fffh
840	jnz .pd_loop
841
842	%ifdef BS2_WITH_RAW_MODE
843	;
844	; Make sure there is some free space for the hypervisor near the top
845	; of the address space (last 4MB is mapped).
846	;
847	and byte [bx - 08h], 0feh
848	and byte [bx - 0ch], 0feh
849	and byte [bx - 10h], 0feh
850	and byte [bx - 14h], 0feh
851	%endif
852
853	pop ds
854	ret
855	ENDPROC bs2InitPagedProtMode
856	%endif ; BS2_INC_CMN_PP
857
858
859	%ifdef BS2_INC_CMN_PAE_LM
860	;;
861	; Initializes the PAE page directories.
862	;
863	; Assumes ds is set to BS2_PXX_SEL already and that edx is zero.
864	;
865	; @uses ebx, esi
866	; @internal
867	;
868	BEGINPROC bs2InitPaePageDirs
869	mov esi, X86_PDE4M_P \| X86_PDE4M_RW \| X86_PDE4M_PS \| X86_PDE4M_US
870	mov ebx, BS2_PXX_OFF(BS2_PAE_PD_ADDR)
871	.pd_loop:
872	mov [bx], esi
873	mov [bx + 4], edx
874	add esi, _2M
875	add bx, 8
876	test bx, 0fffh
877	jnz .pd_loop
878	cmp bx, BS2_PXX_OFF(BS2_PAE_PD_ADDR + 4*_4K)
879	jne .pd_loop
880
881	%ifdef BS2_WITH_RAW_MODE
882	;
883	; Make sure there is some free space for the hypervisor near the top
884	; of the address space (last 4MB is mapped).
885	;
886	and byte [bx - 10h], 0feh
887	and byte [bx - 18h], 0feh
888	and byte [bx - 20h], 0feh
889	and byte [bx - 28h], 0feh
890	%endif
891
892	ret
893	ENDPROC bs2InitPaePageDirs
894	%endif ; BS2_INC_CMN_PAE_LM
895
896
897	%ifdef BS2_INC_CMN_PAE
898	;;
899	; Initializes the PAE protected mode structures during init.
900	;
901	; @uses edx, ebx, esi.
902	;
903	BEGINCODELOW
904	BITS 16
905	BEGINPROC bs2InitPaeProtMode
906	push ds
907
908	mov dx, BS2_PXX_SEL
909	mov ds, dx
910	xor edx, edx
911
912	;
913	; Join paths with long mode.
914	;
915	call bs2InitPaePageDirs
916
917	;
918	; Create the page directory pointer table.
919	;
920	mov ebx, BS2_PXX_OFF(BS2_PAE_PDP_ADDR)
921	mov dword [bx], (BS2_PAE_PD_ADDR ) \| X86_PDPE_P
922	mov dword [bx + 04h], edx
923	mov dword [bx + 08h], (BS2_PAE_PD_ADDR + 1000h) \| X86_PDPE_P
924	mov dword [bx + 0ch], edx
925	mov dword [bx + 10h], (BS2_PAE_PD_ADDR + 2000h) \| X86_PDPE_P
926	mov dword [bx + 14h], edx
927	mov dword [bx + 18h], (BS2_PAE_PD_ADDR + 3000h) \| X86_PDPE_P
928	mov dword [bx + 1ch], edx
929
930	pop ds
931	ret
932	ENDPROC bs2InitPaeProtMode
933	%endif ; BS2_INC_CMN_PAE
934
935
936	%ifdef BS2_INC_CMN_LM
937	;;
938	; Initializes the long mode structures during init.
939	;
940	; @uses edx, ebx, esi
941	;
942	BEGINCODELOW
943	BITS 16
944	BEGINPROC bs2InitLongMode
945	push ds
946
947	mov dx, BS2_PXX_SEL
948	mov ds, dx
949	xor edx, edx
950
951	;
952	; Join paths with the PAE code.
953	;
954	call bs2InitPaePageDirs
955
956	;
957	; Create the long mode page directory pointer table.
958	;
959	mov ebx, BS2_PXX_OFF(BS2_LM_PDP_ADDR)
960	.pdptr_loop:
961	mov dword [bx], (BS2_PAE_PD_ADDR ) \| X86_PDPE_P \| X86_PDPE_RW \| X86_PDPE_US
962	mov dword [bx + 04h], edx
963	mov dword [bx + 08h], (BS2_PAE_PD_ADDR + 1000h) \| X86_PDPE_P \| X86_PDPE_RW \| X86_PDPE_US
964	mov dword [bx + 0ch], edx
965	mov dword [bx + 10h], (BS2_PAE_PD_ADDR + 2000h) \| X86_PDPE_P \| X86_PDPE_RW \| X86_PDPE_US
966	mov dword [bx + 14h], edx
967	mov dword [bx + 18h], (BS2_PAE_PD_ADDR + 3000h) \| X86_PDPE_P \| X86_PDPE_RW \| X86_PDPE_US
968	mov dword [bx + 1ch], edx
969	add bx, 20h
970	test bx, 0fffh
971	jnz .pdptr_loop
972
973	;
974	; Set up the page map level 4 table, all entries mapping the same PDPTR.
975	;
976	mov ebx, BS2_PXX_OFF(BS2_LM_PML4_ADDR)
977	.pml4_loop:
978	mov dword [bx], BS2_LM_PDP_ADDR \| X86_PML4E_P \| X86_PML4E_RW \| X86_PML4E_US
979	mov dword [bx + 4], edx
980	add bx, 8
981	test bx, 0fffh
982	jnz .pml4_loop
983
984	pop ds
985	ret
986	ENDPROC bs2InitLongMode
987	%endif ; BS2_INC_CMN_LM
988
989
990
991	;
992	; Routines for entering the different modes.
993	;
994
995	%ifdef BS2_INC_RM
996	;;
997	; Dummy.
998	BEGINCODELOW
999	BITS 16
1000	BEGINPROC Bs2EnterMode_rm_rm
1001	ret
1002	ENDPROC Bs2EnterMode_rm_rm
1003	%endif ; BS2_INC_RM
1004
1005
1006	%ifdef BS2_INC_PE16
1007	;;
1008	; Enters unpaged protected mode from real mode (cs = 0).
1009	;
1010	; @returns cs,ds,ss,es,gs,fs loaded with 16-bit selectors.
1011	; ebp and esp converted to 32/16-bit.
1012	; All other registers are preserved.
1013	; @uses nothing
1014	;
1015	BEGINCODELOW
1016	BITS 16
1017	BEGINPROC Bs2EnterMode_rm_pe16
1018	push eax
1019	pushfd
1020	cli
1021	%ifndef BS2_NOINC_COMMON
1022	push word SetCpuModeGlobals_pe16
1023	%endif
1024
1025	;
1026	; Switch to protected mode.
1027	;
1028	xor ax, ax
1029	mov ds, ax
1030	lgdt [gdtr]
1031	%ifdef BS2_WITH_TRAPS
1032	lidt [idtr_32bit]
1033	%elifdef BS2_WITH_RAW_MODE
1034	lidt [idtr_dummy_32bit]
1035	%else
1036	lidt [idtr_null]
1037	%endif
1038
1039	mov eax, cr0
1040	or eax, X86_CR0_PE
1041	and eax, 0ffffffffh - X86_CR0_PG
1042	mov cr0, eax
1043	jmp far BS2_SEL_CS16:bs2ProtModeCode16Start_p16
1044	ENDPROC Bs2EnterMode_rm_pe16
1045	%endif ; BS2_INC_PE16
1046
1047
1048	%ifdef BS2_INC_PE32
1049	;;
1050	; Enters unpaged protected mode from real mode (cs = 0).
1051	;
1052	; @returns cs,ds,ss,es,gs,fs loaded with 32-bit selectors.
1053	; ebp and esp converted to 32-bit.
1054	; All other registers are preserved.
1055	; @uses nothing
1056	;
1057	BEGINCODELOW
1058	BITS 16
1059	BEGINPROC Bs2EnterMode_rm_pe32
1060	push word 0
1061	push eax
1062	pushfd
1063	cli
1064	%ifndef BS2_NOINC_COMMON
1065	push dword SetCpuModeGlobals_pe32
1066	%endif
1067
1068	; Do the mode switch.
1069	xor ax, ax
1070	mov ds, ax
1071	lgdt [gdtr]
1072	%ifdef BS2_WITH_TRAPS
1073	lidt [idtr_32bit]
1074	%elifdef BS2_WITH_RAW_MODE
1075	lidt [idtr_dummy_32bit]
1076	%else
1077	lidt [idtr_null]
1078	%endif
1079
1080	mov eax, cr0
1081	or eax, X86_CR0_PE
1082	and eax, 0ffffffffh - X86_CR0_PG
1083	mov cr0, eax
1084	jmp far BS2_SEL_CS32:bs2ProtModeCode32Start_p32
1085	ENDPROC Bs2EnterMode_rm_pe32
1086	%endif ; BS2_INC_PE32
1087
1088
1089	;; @todo BS2_INC_PEV86
1090
1091
1092	%ifdef BS2_INC_PP16
1093	;;
1094	; Enters paged protected mode from real mode (cs = 0).
1095	;
1096	; @returns cs,ds,ss,es,gs,fs loaded with 16-bit selectors.
1097	; ebp and esp converted to 16/32-bit.
1098	; All other registers are preserved.
1099	; @uses nothing
1100	;
1101	BEGINCODELOW
1102	BITS 16
1103	BEGINPROC Bs2EnterMode_rm_pp16
1104	push eax
1105	pushfd
1106	cli
1107	%ifndef BS2_NOINC_COMMON
1108	push word SetCpuModeGlobals_pp16
1109	%endif
1110
1111	; Do the mode switch.
1112	xor ax, ax
1113	mov ds, ax
1114	lgdt [gdtr]
1115	%ifdef BS2_WITH_TRAPS
1116	lidt [idtr_32bit]
1117	%elifdef BS2_WITH_RAW_MODE
1118	lidt [idtr_dummy_32bit]
1119	%else
1120	lidt [idtr_null]
1121	%endif
1122
1123	mov eax, BS2_32B_PD_ADDR
1124	mov cr3, eax
1125	%ifdef BS2_WITH_TRAPS
1126	mov [bs2Tss32BitDf + BS2_TSS32_CR3_OFF], eax
1127	%endif
1128
1129	mov eax, cr4
1130	or eax, X86_CR4_PSE
1131	and eax, ~X86_CR4_PAE
1132	mov cr4, eax
1133
1134	mov eax, cr0
1135	or eax, X86_CR0_PE \| X86_CR0_PG \| X86_CR0_WP
1136	mov cr0, eax
1137	jmp far BS2_SEL_CS16:bs2ProtModeCode16Start_p16
1138	ENDPROC Bs2EnterMode_rm_pp16
1139	%endif ; BS2_INC_PP16
1140
1141
1142	%ifdef BS2_INC_PP32
1143	;;
1144	; Enters paged protected mode from real mode (cs = 0).
1145	;
1146	; @returns cs,ds,ss,es,gs,fs loaded with 32-bit selectors.
1147	; ebp and esp converted to 32-bit.
1148	; All other registers are preserved.
1149	; @uses nothing
1150	;
1151	BEGINCODELOW
1152	BITS 16
1153	BEGINPROC Bs2EnterMode_rm_pp32
1154	push word 0
1155	push eax
1156	pushfd
1157	cli
1158	%ifndef BS2_NOINC_COMMON
1159	push dword SetCpuModeGlobals_pp32
1160	%endif
1161
1162	; Do the mode switch.
1163	xor ax, ax
1164	mov ds, ax
1165	lgdt [gdtr]
1166	%ifdef BS2_WITH_TRAPS
1167	lidt [idtr_32bit]
1168	%elifdef BS2_WITH_RAW_MODE
1169	lidt [idtr_dummy_32bit]
1170	%else
1171	lidt [idtr_null]
1172	%endif
1173
1174	mov eax, BS2_32B_PD_ADDR
1175	mov cr3, eax
1176	%ifdef BS2_WITH_TRAPS
1177	mov [bs2Tss32BitDf + BS2_TSS32_CR3_OFF], eax
1178	%endif
1179
1180	mov eax, cr4
1181	or eax, X86_CR4_PSE
1182	and eax, ~X86_CR4_PAE
1183	mov cr4, eax
1184
1185	mov eax, cr0
1186	or eax, X86_CR0_PE \| X86_CR0_PG \| X86_CR0_WP
1187	mov cr0, eax
1188	jmp far BS2_SEL_CS32:bs2ProtModeCode32Start_p32
1189	ENDPROC Bs2EnterMode_rm_pp32
1190	%endif ; BS2_INC_PP16
1191
1192
1193	;; @todo BS2_INC_PPV86
1194
1195
1196	%ifdef BS2_INC_PAE16
1197	;;
1198	; Enters PAE protected mode from real mode (cs = 0).
1199	;
1200	; @returns cs,ds,ss,es,gs,fs loaded with 16-bit selectors.
1201	; ebp and esp converted to 16/32-bit.
1202	; All other registers are preserved.
1203	; @uses nothing
1204	;
1205	BEGINCODELOW
1206	BITS 16
1207	BEGINPROC Bs2EnterMode_rm_pae16
1208	push eax
1209	pushfd
1210	cli
1211	%ifndef BS2_NOINC_COMMON
1212	push word SetCpuModeGlobals_pae16
1213	%endif
1214
1215	; Do the mode switch.
1216	xor ax, ax
1217	mov ds, ax
1218	lgdt [gdtr]
1219	%ifdef BS2_WITH_TRAPS
1220	lidt [idtr_32bit]
1221	%elifdef BS2_WITH_RAW_MODE
1222	lidt [idtr_dummy_32bit]
1223	%else
1224	lidt [idtr_null]
1225	%endif
1226
1227	mov eax, BS2_PAE_PDP_ADDR
1228	mov cr3, eax
1229	%ifdef BS2_WITH_TRAPS
1230	mov [bs2Tss32BitDf + BS2_TSS32_CR3_OFF], eax
1231	%endif
1232
1233	mov eax, cr4
1234	or eax, X86_CR4_PAE \| X86_CR4_PSE
1235	mov cr4, eax
1236
1237	mov eax, cr0
1238	or eax, X86_CR0_PE \| X86_CR0_PG \| X86_CR0_WP
1239	mov cr0, eax
1240	jmp far BS2_SEL_CS16:bs2ProtModeCode16Start_p16
1241	ENDPROC Bs2EnterMode_rm_pae16
1242	%endif ; BS2_INC_PAE16
1243
1244
1245	%ifdef BS2_INC_PAE32
1246	;;
1247	; Enters PAE protected mode from real mode (cs = 0).
1248	;
1249	; @returns cs,ds,ss,es,gs,fs loaded with 32-bit selectors.
1250	; ebp and esp converted to 32-bit.
1251	; All other registers are preserved.
1252	; @uses nothing
1253	;
1254	BEGINCODELOW
1255	BITS 16
1256	BEGINPROC Bs2EnterMode_rm_pae32
1257	push word 0
1258	push eax
1259	pushfd
1260	cli
1261	%ifndef BS2_NOINC_COMMON
1262	push dword SetCpuModeGlobals_pae32
1263	%endif
1264
1265	; Do the mode switch.
1266	xor ax, ax
1267	mov ds, ax
1268	lgdt [gdtr]
1269	%ifdef BS2_WITH_TRAPS
1270	lidt [idtr_32bit]
1271	%elifdef BS2_WITH_RAW_MODE
1272	lidt [idtr_dummy_32bit]
1273	%else
1274	lidt [idtr_null]
1275	%endif
1276
1277	mov eax, BS2_PAE_PDP_ADDR
1278	mov cr3, eax
1279	%ifdef BS2_WITH_TRAPS
1280	mov [bs2Tss32BitDf + BS2_TSS32_CR3_OFF], eax
1281	%endif
1282
1283	mov eax, cr4
1284	or eax, X86_CR4_PAE \| X86_CR4_PSE
1285	mov cr4, eax
1286
1287	mov eax, cr0
1288	or eax, X86_CR0_PE \| X86_CR0_PG \| X86_CR0_WP
1289	mov cr0, eax
1290	jmp far BS2_SEL_CS32:bs2ProtModeCode32Start_p32
1291	ENDPROC Bs2EnterMode_rm_pae32
1292	%endif ; BS2_INC_PAE32
1293
1294
1295	;; @todo BS2_INC_PAEV86
1296
1297
1298	%ifdef BS2_INC_LM16
1299	;;
1300	; Enters long mode from real mode (cs = 0).
1301	;
1302	; @returns cs,ds,ss,es,gs,fs loaded with 16-bit selectors.
1303	; rbp and rsp converted to 16/32/64-bit.
1304	; All other registers are preserved.
1305	; @uses nothing
1306	;
1307	BEGINCODELOW
1308	BITS 16
1309	BEGINPROC Bs2EnterMode_rm_lm16
1310	call Bs2EnterMode_rm_lm64
1311	BITS 64
1312	call Bs2Thunk_lm64_lm16
1313	BITS 16
1314	ret
1315	ENDPROC Bs2EnterMode_rm_lm16
1316	%endif ; BS2_INC_LM16
1317
1318
1319	%ifdef BS2_INC_LM32
1320	;;
1321	; Enters long mode from real mode (cs = 0).
1322	;
1323	; @returns cs,ds,ss,es,gs,fs loaded with 32-bit selectors.
1324	; rbp and rsp converted to 16/32/64-bit.
1325	; All other registers are preserved.
1326	; @uses nothing
1327	;
1328	BEGINCODELOW
1329	BITS 16
1330	BEGINPROC Bs2EnterMode_rm_lm32
1331	; Change the return address into a 32-bit one.
1332	push word 0 ; Reserved 2 extra bytes for 32-bit return address.
1333	push eax ; Save eax.
1334	movzx eax, word [esp + 6h] ; Read narrow return address.
1335	mov [esp + 4h], eax ; Store wide return address.
1336	pop eax ; Restore eax.
1337
1338	; Do the mode switch and thunking.
1339	call Bs2EnterMode_rm_lm64
1340	BITS 64
1341	call Bs2Thunk_lm64_lm32
1342	BITS 32
1343	ret
1344	ENDPROC Bs2EnterMode_rm_lm32
1345	%endif ; BS2_INC_LM32
1346
1347
1348	%ifdef BS2_INC_LM64
1349	;;
1350	; Enters long mode from real mode (cs = 0).
1351	;
1352	; @returns cs,ds,ss,es,gs,fs loaded with 64-bit selectors.
1353	; rbp and rsp converted to 64-bit.
1354	; All other registers are preserved.
1355	; @uses nothing
1356	;
1357	BEGINCODELOW
1358	BITS 16
1359	BEGINPROC Bs2EnterMode_rm_lm64
1360	push word 0 ; reserve bytes for 64-bit return address.
1361	push dword 0
1362	push dword 0 ; rax
1363	push eax
1364	push dword 0 ; rcx
1365	push ecx
1366	push dword 0 ; rdx
1367	push edx
1368	push dword 0 ; rflags
1369	pushfd
1370	cli
1371
1372	; Fix the return address.
1373	mov ax, [esp + 20h + 6h]
1374	mov word [esp + 20h + 6h], 0
1375	mov [esp + 20h], ax
1376
1377	;
1378	; Switch to long mode.
1379	;
1380	xor ax, ax
1381	mov ds, ax
1382	lgdt [gdtr]
1383	%ifdef BS2_WITH_TRAPS
1384	lidt [idtr_64bit]
1385	%else
1386	lidt [idtr_null]
1387	%endif
1388
1389	mov eax, BS2_LM_PML4_ADDR
1390	mov cr3, eax
1391
1392	mov eax, cr4
1393	or eax, X86_CR4_PAE \| X86_CR4_PSE
1394	mov cr4, eax
1395
1396	mov ecx, MSR_K6_EFER
1397	rdmsr
1398	or eax, MSR_K6_EFER_LME
1399	wrmsr
1400
1401	mov eax, cr0
1402	or eax, X86_CR0_PE \| X86_CR0_PG \| X86_CR0_WP
1403	mov cr0, eax
1404	jmp far BS2_SEL_CS64:.code64_start
1405
1406	BITS 64
1407	.code64_start:
1408	mov eax, BS2_SEL_DS64
1409	mov ds, ax
1410	mov es, ax
1411	mov fs, ax
1412	mov gs, ax
1413	mov ax, BS2_SEL_SS64
1414	mov ss, ax
1415	%ifdef BS2_WITH_TRAPS
1416	btr dword [bs2Gdt + BS2_SEL_TSS64 + 32/8], 1+8 ; busy -> avail
1417	%ifndef BS2_WITH_MANUAL_LTR
1418	mov ax, BS2_SEL_TSS64
1419	ltr ax
1420	%endif
1421	%endif
1422
1423	and ebp, 0ffffh
1424	and esp, 0ffffh
1425	and edi, 0ffffffffh
1426	and esi, 0ffffffffh
1427	and ebx, 0ffffffffh
1428
1429	%ifndef BS2_NOINC_COMMON
1430	call SetCpuModeGlobals_lm64
1431	%endif
1432
1433	popf
1434	pop rdx
1435	pop rcx
1436	pop rax
1437	ret
1438	ENDPROC Bs2EnterMode_rm_lm64
1439	%endif ; BS2_INC_PAE32
1440
1441
1442
1443	%ifdef BS2_INC_CMN_P16
1444	;;
1445	; Code shared by the three 16-bit protected mode switchers.
1446	;
1447	; @internal
1448	;
1449	BEGINCODELOW
1450	BITS 16
1451	BEGINPROC bs2ProtModeCode16Start_p16
1452	; Initialize the registers.
1453	mov ax, BS2_SEL_DS16
1454	mov ds, ax
1455	mov es, ax
1456	mov fs, ax
1457	mov gs, ax
1458	mov ax, BS2_SEL_SS16
1459	mov ss, ax
1460	and esp, 0ffffh
1461	and ebp, 0ffffh
1462	%ifdef BS2_WITH_TRAPS
1463	btr word [bs2Gdt + BS2_SEL_TSS32 + 32/8], 1+8 ; busy -> avail
1464	btr word [bs2Gdt + BS2_SEL_TSS32_DF + 32/8], 1+8 ; busy -> avail
1465	%ifndef BS2_WITH_MANUAL_LTR
1466	mov ax, BS2_SEL_TSS32
1467	ltr ax
1468	%endif
1469	%endif
1470
1471	%ifndef BS2_NOINC_COMMON
1472	; Set up mode specific global variables.
1473	pop ax
1474	call ax
1475	%endif
1476
1477	popfd
1478	pop eax
1479	ret
1480	ENDPROC bs2ProtModeCode16Start_p16
1481	%endif ; BS2_INC_CMN_P16
1482
1483
1484	%ifdef BS2_INC_CMN_P32
1485	;;
1486	; Code shared by the three 32-bit protected mode switchers.
1487	;
1488	; @internal
1489	;
1490	BEGINCODELOW
1491	BITS 32
1492	BEGINPROC bs2ProtModeCode32Start_p32
1493	; Initialize the registers.
1494	mov ax, BS2_SEL_DS32
1495	mov ds, ax
1496	mov es, ax
1497	mov fs, ax
1498	mov gs, ax
1499	mov ax, BS2_SEL_SS32
1500	mov ss, ax
1501	and esp, 0ffffh
1502	and ebp, 0ffffh
1503	%ifdef BS2_WITH_TRAPS
1504	btr dword [bs2Gdt + BS2_SEL_TSS32 + 32/8], 1+8 ; busy -> avail
1505	btr dword [bs2Gdt + BS2_SEL_TSS32_DF + 32/8], 1+8 ; busy -> avail
1506	%ifndef BS2_WITH_MANUAL_LTR
1507	mov ax, BS2_SEL_TSS32
1508	ltr ax
1509	%endif
1510	%endif
1511
1512	%ifndef BS2_NOINC_COMMON
1513	; Set up mode specific global variables.
1514	pop eax
1515	call eax
1516	%endif
1517
1518	; Make the return address 32-bit and then return.
1519	movzx eax, word [esp + 0ah]
1520	mov [esp + 8h], eax
1521	popfd
1522	pop eax
1523	ret
1524	ENDPROC bs2ProtModeCode32Start_p32
1525	%endif ; BS2_INC_CMN_P32
1526
1527
1528
1529	;
1530	; Routines for exitting the different modes.
1531	;
1532
1533
1534	%ifdef BS2_INC_RM
1535	;;
1536	; Dummy.
1537	BEGINCODELOW
1538	BITS 16
1539	BEGINPROC Bs2ExitMode_rm
1540	ret
1541	ENDPROC Bs2ExitMode_rm
1542	%endif ; BS2_INC_RM
1543
1544
1545	%ifdef BS2_INC_PE16
1546	;;
1547	; See bs2ExitMode_p16.
1548	BEGINCODELOW
1549	BITS 16
1550	BEGINPROC Bs2ExitMode_pe16
1551	push bs2ExitModeCleanupNop_rm
1552	jmp bs2ExitMode_p16
1553	ENDPROC Bs2ExitMode_pe16
1554	%endif ; BS2_INC_PE16
1555
1556
1557	%ifdef BS2_INC_PE32
1558	;;
1559	; See bs2ExitMode_p32.
1560	BEGINCODEHIGH
1561	BITS 32
1562	BEGINPROC Bs2ExitMode_pe32
1563	push bs2ExitModeCleanupNop_rm
1564	jmp bs2ExitMode_p32
1565	ENDPROC Bs2ExitMode_pe32
1566	%endif ; BS2_INC_PE32
1567
1568
1569	%ifdef BS2_INC_PEV86
1570	;;
1571	; See Bs2ExitMode_v86.
1572	BEGINCODELOW
1573	BITS 16
1574	BEGINPROC Bs2ExitMode_pev86
1575	push bs2ExitModeCleanupNop_rm
1576	jmp Bs2ExitMode_pv86
1577	ENDPROC Bs2ExitMode_pev86
1578	%endif ; BS2_INC_PEV86
1579
1580
1581	%ifdef BS2_INC_PP16
1582	;;
1583	; See bs2ExitMode_p16.
1584	BEGINCODELOW
1585	BITS 16
1586	BEGINPROC Bs2ExitMode_pp16
1587	push bs2ExitModeCleanupNop_rm
1588	jmp bs2ExitMode_p16
1589	ENDPROC Bs2ExitMode_pp16
1590	%endif ; BS2_INC_PP16
1591
1592
1593	%ifdef BS2_INC_PP32
1594	;;
1595	; See bs2ExitMode_p32.
1596	BEGINCODEHIGH
1597	BITS 32
1598	BEGINPROC Bs2ExitMode_pp32
1599	push bs2ExitModeCleanupNop_rm
1600	jmp bs2ExitMode_p32
1601	ENDPROC Bs2ExitMode_pp32
1602	%endif ; BS2_INC_PP32
1603
1604
1605	%ifdef BS2_INC_PPV86
1606	;;
1607	; See Bs2ExitMode_v86.
1608	BEGINCODELOW
1609	BITS 16
1610	BEGINPROC Bs2ExitMode_ppv86
1611	push bs2ExitModeCleanupNop_rm
1612	jmp Bs2ExitMode_pv86
1613	ENDPROC Bs2ExitMode_ppv86
1614	%endif ; BS2_INC_PPV86
1615
1616
1617
1618	%ifdef BS2_INC_PAE16
1619	;;
1620	; See bs2ExitMode_p16.
1621	BEGINCODELOW
1622	BITS 16
1623	BEGINPROC Bs2ExitMode_pae16
1624	push bs2ExitModeCleanupPae_rm
1625	jmp bs2ExitMode_p16
1626	ENDPROC Bs2ExitMode_pae16
1627	%endif ; BS2_INC_pae16
1628
1629
1630	%ifdef BS2_INC_PAE32
1631	;;
1632	; See bs2ExitMode_p32.
1633	BEGINCODEHIGH
1634	BITS 32
1635	BEGINPROC Bs2ExitMode_pae32
1636	push bs2ExitModeCleanupPae_rm
1637	jmp bs2ExitMode_p32
1638	ENDPROC Bs2ExitMode_pae32
1639	%endif ; BS2_INC_PAE32
1640
1641
1642	%ifdef BS2_INC_PAEV86
1643	;;
1644	; See Bs2ExitMode_v86.
1645	BEGINCODELOW
1646	BITS 16
1647	BEGINPROC Bs2ExitMode_paev86
1648	push bs2ExitModeCleanupPae_rm
1649	jmp Bs2ExitMode_pv86
1650	ENDPROC Bs2ExitMode_paev86
1651	%endif ; BS2_INC_PAEV86
1652
1653
1654	%ifdef BS2_INC_LM16
1655	;;
1656	; See bs2ExitMode_p16.
1657	BEGINCODELOW
1658	BITS 16
1659	BEGINPROC Bs2ExitMode_lm16
1660	push bs2ExitModeCleanupLm_rm
1661	jmp bs2ExitMode_p16
1662	ENDPROC Bs2ExitMode_lm16
1663	%endif ; BS2_INC_lm16
1664
1665
1666	%ifdef BS2_INC_LM32
1667	;;
1668	; See bs2ExitMode_p32.
1669	BEGINCODEHIGH
1670	BITS 32
1671	BEGINPROC Bs2ExitMode_lm32
1672	push bs2ExitModeCleanupLm_rm
1673	jmp bs2ExitMode_p32
1674	ENDPROC Bs2ExitMode_lm32
1675	%endif ; BS2_INC_LM32
1676
1677
1678	%ifdef BS2_INC_LM64
1679	;;
1680	; See Bs2ExitMode_v86.
1681	BEGINCODELOW
1682	BITS 64
1683	BEGINPROC Bs2ExitMode_lm64
1684	call Bs2Thunk_lm64_lm16
1685	BITS 16
1686	pop dword [esp]
1687	pop word [esp]
1688	push bs2ExitModeCleanupLm_rm
1689	jmp bs2ExitMode_p16
1690	ENDPROC Bs2ExitMode_lm64
1691	%endif ; BS2_INC_LM64
1692
1693
1694	; Isn't there a better way to do this in yasm?
1695	%ifdef BS2_INC_CMN_P16
1696	%define BS2_INC_BS2EXITMODE_P16
1697	%elifdef BS2_INC_CMN_LM
1698	%define BS2_INC_BS2EXITMODE_P16
1699	%elifdef BS2_INC_CMN_P32
1700	%define BS2_INC_BS2EXITMODE_P16
1701	%endif
1702
1703	%ifdef BS2_INC_BS2EXITMODE_P16
1704	;;
1705	; Exit 16-bit protected or long mode (cs = CS16, ss = SS16).
1706	;
1707	; @returns cs,ds,ss,es,gs,fs loaded with the 0 selector.
1708	; All other registers are preserved.
1709	; @uses nothing
1710	;
1711	BEGINCODELOW
1712	BITS 16
1713	BEGINPROC bs2ExitMode_p16
1714	push eax
1715	pushfd
1716	cli
1717
1718	; Make sure we've got the right SS and CS values (paranoia).
1719	mov ax, BS2_SEL_SS16
1720	mov ss, ax
1721	jmp far BS2_SEL_CS16:.code16_start
1722
1723	.code16_start:
1724	; Turn off paging and protected mode.
1725	mov eax, cr0
1726	and eax, 0ffffffffh - X86_CR0_PE - X86_CR0_PG
1727	mov cr0, eax
1728	jmp far 0000:.real_mode_start
1729
1730	.real_mode_start:
1731	; Load the correct real mode segment registers.
1732	xor ax, ax
1733	mov ss, ax
1734	mov ds, ax
1735	mov es, ax
1736	mov fs, ax
1737	mov gs, ax
1738
1739	; Load the real mode idtr.
1740	lidt [idtr_real_mode]
1741
1742	; Cleanup.
1743	mov ax, [esp + 8h]
1744	call ax
1745
1746	%ifndef BS2_NOINC_COMMON
1747	; Set globals.
1748	call SetCpuModeGlobals_rm
1749	%endif
1750
1751	popfd
1752	pop eax
1753	add sp, 2h ; cleanup routine address
1754	ret
1755	ENDPROC bs2ExitMode_p16
1756	%endif ; BS2_INC_CMN_P16
1757
1758
1759	%ifdef BS2_INC_CMN_P32
1760	;;
1761	; Exit 32-bit protected or long mode (cs = CS32, ss = SS32).
1762	;
1763	; The return address as well as the stack registers must be somewhere within
1764	; the first 64KB of the address space.
1765	;
1766	; @returns cs,ds,ss,es,gs,fs loaded with the 0 selector.
1767	; All other registers are preserved.
1768	; @uses nothing
1769	;
1770	BEGINCODELOW
1771	BITS 32
1772	BEGINPROC bs2ExitMode_p32
1773	push eax
1774	mov eax, [esp + 8h] ; return address
1775	mov [esp + 0ah], ax
1776	mov eax, [esp + 4h] ; cleanup routine address
1777	mov [esp + 08h], ax
1778	pop eax
1779	add esp, 4h
1780
1781	call Bs2Thunk_p32_p16
1782	BITS 16
1783	jmp bs2ExitMode_p16
1784	ENDPROC bs2ExitMode_p32
1785	%endif ; BS2_INC_CMN_P32
1786
1787
1788	;;
1789	; Dummy cleanup routine.
1790	BEGINCODELOW
1791	BITS 16
1792	BEGINPROC bs2ExitModeCleanupNop_rm
1793	ret
1794	ENDPROC bs2ExitModeCleanupNop_rm
1795
1796
1797	%ifdef BS2_INC_CMN_PAE
1798	;;
1799	; Cleans up after leaving PAE mode.
1800	; @uses nothing
1801	BEGINCODELOW
1802	BITS 16
1803	BEGINPROC bs2ExitModeCleanupPae_rm
1804	push eax
1805	mov eax, cr4
1806	and eax, ~X86_CR4_PAE
1807	mov cr4, eax
1808	pop eax
1809	ret
1810	ENDPROC bs2ExitModeCleanupPae_rm
1811	%endif
1812
1813
1814	%ifdef BS2_INC_CMN_LM
1815	;;
1816	; Cleans up after leaving long mode.
1817	; @uses nothing
1818	BEGINCODELOW
1819	BITS 16
1820	BEGINPROC bs2ExitModeCleanupLm_rm
1821	push eax
1822	push edx
1823	push ecx
1824
1825	mov ecx, MSR_K6_EFER
1826	rdmsr
1827	and eax, ~MSR_K6_EFER_LME
1828	wrmsr
1829
1830	pop ecx
1831	pop edx
1832	pop eax
1833	ret
1834	ENDPROC bs2ExitModeCleanupLm_rm
1835	%endif
1836
1837
1838
1839	;
1840	; Thunking routines for switching between 16/32/64-bit code.
1841	;
1842
1843
1844	%ifdef BS2_INC_CMN_PM
1845	;;
1846	; Switches from 32-bit to 16-bit mode ({eip,esp,ebp} < 64KB).
1847	;
1848	; @returns cs,ds,ss,es,gs,fs loaded with 16-bit selectors.
1849	; All other registers are preserved.
1850	; @uses nothing
1851	;
1852	BEGINCODELOW
1853	BITS 32
1854	BEGINPROC Bs2Thunk_p32_p16
1855	push eax
1856	pushf
1857	cli
1858	mov ax, BS2_SEL_SS16
1859	jmp far BS2_SEL_CS16:.code16_start
1860	BITS 16
1861	.code16_start:
1862	mov ss, ax
1863	mov ax, BS2_SEL_DS16
1864	mov ds, ax
1865	mov es, ax
1866	mov fs, ax
1867	mov gs, ax
1868
1869	; Fix the return address and then return.
1870	mov ax, [esp + 08h]
1871	mov [esp + 0ah], ax
1872	popfd
1873	pop eax
1874	add sp, 2h
1875	ret
1876	ENDPROC Bs2Thunk_p32_p16
1877	%define Bs2Thunk_p32_pe16 Bs2Thunk_p32_p16 ; Alternative name for TMPL_NM
1878	%define Bs2Thunk_p32_pp16 Bs2Thunk_p32_p16 ; Alternative name for TMPL_NM
1879	%define Bs2Thunk_p32_pae16 Bs2Thunk_p32_p16 ; Alternative name for TMPL_NM
1880	%endif ; BS2_INC_CMN_PM
1881
1882
1883	%ifdef BS2_INC_CMN_PM
1884	;;
1885	; Switches from 16-bit to 32-bit mode (cs = CS16, ds = DS16).
1886	;
1887	; @returns cs,ds,ss,es,gs,fs loaded with 32-bit selectors.
1888	; ebp and esp converted to 32bit.
1889	; All other registers are preserved.
1890	; @uses nothing
1891	;
1892	BEGINCODELOW
1893	BITS 16
1894	BEGINPROC Bs2Thunk_p16_p32
1895	push word 0
1896	push eax
1897	pushfd
1898	cli
1899	jmp far BS2_SEL_CS32:.code32_start
1900	BITS 32
1901	.code32_start:
1902	mov eax, BS2_SEL_SS32
1903	mov ss, ax
1904	mov ax, BS2_SEL_DS32
1905	mov ds, ax
1906	mov es, ax
1907	mov fs, ax
1908	mov gs, ax
1909	and ebp, 0ffffh
1910	and esp, 0ffffh
1911
1912	; Fix the return address and then return.
1913	movzx eax, word [esp + 0ah]
1914	mov [esp + 08h], eax
1915	popfd
1916	pop eax
1917	ret
1918	ENDPROC Bs2Thunk_p16_p32
1919	%define Bs2Thunk_p16_pe32 Bs2Thunk_p16_p32 ; Alternative name for TMPL_NM
1920	%define Bs2Thunk_p16_pp32 Bs2Thunk_p16_p32 ; Alternative name for TMPL_NM
1921	%define Bs2Thunk_p16_pae32 Bs2Thunk_p16_p32 ; Alternative name for TMPL_NM
1922	%endif ; BS2_INC_CMN_PM
1923
1924
1925	%ifdef BS2_INC_CMN_LM
1926	;;
1927	; Switches from 64-bit to 16-bit mode ({rip,rsp,rbp} < 64KB).
1928	;
1929	; @returns cs,ds,ss,es,gs,fs loaded with 16-bit selectors.
1930	; All other registers are preserved.
1931	; @uses nothing
1932	;
1933	BEGINCODELOW
1934	BITS 64
1935	BEGINPROC Bs2Thunk_lm64_lm16
1936	push rax
1937	pushf
1938	cli
1939	mov ax, BS2_SEL_SS16
1940	push BS2_SEL_CS16
1941	push .code16_start
1942	retf
1943	BITS 16
1944	.code16_start:
1945	mov ss, ax
1946	mov ax, BS2_SEL_DS16
1947	mov ds, ax
1948	mov es, ax
1949	mov fs, ax
1950	mov gs, ax
1951
1952	; Fix the return address and then return.
1953	mov ax, [esp + 10h]
1954	mov [esp + 16h], ax
1955	popfd
1956	add sp, 4h
1957	pop eax
1958	add sp, 4h + 6h
1959	ret
1960	ENDPROC Bs2Thunk_lm64_lm16
1961	%define Bs2Thunk_p64_lm16 Bs2Thunk_lm64_lm16 ; Alternative name for TMPL_NM
1962	%endif ; BS2_INC_CMN_LM
1963
1964
1965	%ifdef BS2_INC_LM16
1966	;;
1967	; Switches from 16-bit to 64-bit mode (cs = CS16, ss = SS16).
1968	;
1969	; @returns cs,ds,ss,es,gs,fs loaded with 64-bit selectors.
1970	; rbp and rsp converted to 16/32/64-bit.
1971	; All other registers are preserved.
1972	; @uses nothing
1973	;
1974	BEGINCODELOW
1975	BITS 16
1976	BEGINPROC Bs2Thunk_lm16_lm64
1977	push word 0
1978	push dword 0
1979	push dword 0
1980	push eax
1981	push dword 0
1982	pushfd
1983	cli
1984	mov eax, BS2_SEL_SS64
1985	jmp far BS2_SEL_CS64:.code64_start
1986	BITS 64
1987	.code64_start:
1988	mov ss, ax
1989	mov ax, BS2_SEL_DS64
1990	mov ds, ax
1991	mov es, ax
1992	mov fs, ax
1993	mov gs, ax
1994
1995	and ebp, 0ffffh
1996	and esp, 0ffffh
1997	and edi, 0ffffffffh
1998	and esi, 0ffffffffh
1999	and ebx, 0ffffffffh
2000
2001	; Fix the return address and then return.
2002	movzx rax, word [rsp + 16h]
2003	mov [rsp + 10h], rax
2004	popf
2005	pop rax
2006	ret
2007	ENDPROC Bs2Thunk_lm16_lm64
2008	%define Bs2Thunk_p16_lm64 Bs2Thunk_lm16_lm64 ; Alternative name for TMPL_NM
2009	%endif ; BS2_INC_LM16
2010
2011
2012	%ifdef BS2_INC_LM32
2013	;;
2014	; Switches from 64-bit to 32-bit mode ({rip,rsp,rbp} < 4GB).
2015	;
2016	; @returns cs,ds,ss,es,gs,fs loaded with 32-bit selectors.
2017	; All other registers are preserved.
2018	; @uses nothing
2019	;
2020	BEGINCODEHIGH
2021	BITS 64
2022	BEGINPROC Bs2Thunk_lm64_lm32
2023	push rax
2024	pushf
2025	cli
2026	mov ax, BS2_SEL_SS32
2027	push BS2_SEL_CS32
2028	push .code32_start
2029	retf
2030	BITS 32
2031	.code32_start:
2032	mov ss, ax
2033	mov ax, BS2_SEL_DS32
2034	mov ds, ax
2035	mov es, ax
2036	mov fs, ax
2037	mov gs, ax
2038
2039	; Fix the return address and then return.
2040	mov eax, [esp + 10h]
2041	mov [esp + 14h], eax
2042	popfd
2043	mov eax, [esp + 4h]
2044	lea esp, [esp + 10h]
2045	ret
2046	ENDPROC Bs2Thunk_lm64_lm32
2047	%define Bs2Thunk_p64_lm32 Bs2Thunk_lm64_lm32 ; Alternative name for TMPL_NM
2048	%endif ; BS2_INC_LM32
2049
2050
2051	%ifdef BS2_INC_LM32
2052	;;
2053	; Switches from 32-bit to 64-bit mode (cs = CS32, ss = SS32).
2054	;
2055	; @returns cs,ds,ss,es,gs,fs loaded with 64-bit selectors.
2056	; rbp and rsp converted to 32/64-bit.
2057	; All other registers are preserved.
2058	; @uses nothing
2059	;
2060	BEGINCODEHIGH
2061	BITS 32
2062	BEGINPROC Bs2Thunk_lm32_lm64
2063	push dword 0
2064	push dword 0
2065	push eax
2066	push dword 0
2067	pushfd
2068	cli
2069	mov eax, BS2_SEL_SS64
2070	jmp far BS2_SEL_CS64:.code64_start
2071	BITS 64
2072	.code64_start:
2073	mov ss, ax
2074	mov ax, BS2_SEL_DS64
2075	mov ds, ax
2076	mov es, ax
2077	mov fs, ax
2078	mov gs, ax
2079
2080	and ebp, 0ffffffffh
2081	and esp, 0ffffffffh
2082	and edi, 0ffffffffh
2083	and esi, 0ffffffffh
2084	and ebx, 0ffffffffh
2085
2086	; Fix the return address and then return.
2087	mov eax, [rsp + 14h]
2088	mov [rsp + 10h], rax
2089	popf
2090	pop rax
2091	ret
2092	ENDPROC Bs2Thunk_lm32_lm64
2093	%define Bs2Thunk_p32_lm64 Bs2Thunk_lm32_lm64 ; Alternative name for TMPL_NM
2094	%endif ; BS2_INC_LM32
2095
2096
2097
2098
2099	;
2100	; Routines for checking if mode is supported or not.
2101	;
2102	; @returns al=1 & ZF=0 if supported, al=0 & ZF=1 if not.
2103	; @uses nothing.
2104	;
2105
2106	; These are easy.
2107	BEGINCODELOW
2108	BITS 16
2109	BEGINPROC bs2IsModeSupportedYes_rm
2110	GLOBALNAME Bs2IsModeSupported_rm_rm
2111	GLOBALNAME Bs2IsModeSupported_rm_pe16
2112	GLOBALNAME Bs2IsModeSupported_rm_pe32
2113	GLOBALNAME Bs2IsModeSupported_rm_pev86
2114	GLOBALNAME Bs2IsModeSupported_rm_pp16
2115	GLOBALNAME Bs2IsModeSupported_rm_pp32
2116	GLOBALNAME Bs2IsModeSupported_rm_ppv86
2117	mov al, 1
2118	test al, al
2119	ret
2120	ENDPROC bs2IsModeSupportedYes_rm
2121
2122
2123	%ifdef BS2_INC_CMN_PAE
2124	BEGINCODELOW
2125	BITS 16
2126	BEGINPROC Bs2IsPaeSupported_16
2127	GLOBALNAME Bs2IsModeSupported_rm_pae16
2128	GLOBALNAME Bs2IsModeSupported_rm_pae32
2129	GLOBALNAME Bs2IsModeSupported_rm_paev86
2130	push eax
2131	push ebx
2132	push ecx
2133	push edx
2134
2135	mov eax, 0
2136	cpuid
2137	cmp eax, 1
2138	jb .no
2139	cmp eax, 1000h
2140	ja .no
2141
2142	mov eax, 1
2143	cpuid
2144	test edx, X86_CPUID_FEATURE_EDX_PAE
2145
2146	pop edx
2147	pop ecx
2148	pop ebx
2149	pop eax
2150
2151	mov al, 0
2152	jz .no
2153	mov al, 1
2154	.no:
2155	ret
2156	ENDPROC Bs2IsPaeSupported_16
2157	%endif ; BS2_INC_CMN_PAE
2158
2159
2160	%ifdef BS2_INC_CMN_LM
2161	BEGINCODELOW
2162	BITS 16
2163	BEGINPROC Bs2IsLongModeSupported_16
2164	GLOBALNAME Bs2IsModeSupported_rm_lm16
2165	GLOBALNAME Bs2IsModeSupported_rm_lm32
2166	GLOBALNAME Bs2IsModeSupported_rm_lm64
2167	push eax
2168	push ebx
2169	push ecx
2170	push edx
2171
2172	mov eax, 080000000h
2173	cpuid
2174	cmp eax, 080000001h
2175	jb .no
2176	cmp eax, 080001000h
2177	ja .no
2178
2179	mov eax, 080000001h
2180	cpuid
2181	test edx, X86_CPUID_EXT_FEATURE_EDX_LONG_MODE
2182
2183	pop edx
2184	pop ecx
2185	pop ebx
2186	pop eax
2187
2188	mov al, 0
2189	jz .no
2190	mov al, 1
2191	.no:
2192	ret
2193	ENDPROC Bs2IsLongModeSupported_16
2194	%endif ; BS2_INC_CMN_LM
2195
2196
2197	;
2198	; Include addition init/base code.
2199	;
2200	%ifdef BS2_WITH_TRAPS
2201	%include "bootsector2-common-init-traps.mac"
2202	%endif
2203
2204
2205	;
2206	; Include common code.
2207	;
2208	%ifndef BS2_NOINC_COMMON
2209	%include "bootsector2-common-routines.mac"
2210	%endif
2211
2212	;
2213	; Include trap records if requested.
2214	;
2215	%ifdef BS2_WITH_TRAPRECS
2216	%include "bootsector2-common-traprec.mac"
2217	%endif
2218
2219	;
2220	; Map stuff for the initial environment.
2221	;
2222	%ifdef BS2_INIT_RM
2223	%define TMPL_RM
2224	%endif
2225	%ifdef BS2_INIT_PE32
2226	%define TMPL_PE32
2227	%endif
2228	%ifdef BS2_INIT_PP32
2229	%define TMPL_PP32
2230	%endif
2231	%ifdef BS2_INIT_PAE32
2232	%define TMPL_PAE32
2233	%endif
2234	%ifdef BS2_INIT_LM64
2235	%define TMPL_LM64
2236	%endif
2237	%include "bootsector2-template-header.mac"
2238
2239
2240	;
2241	; Where we jump after initialization.
2242	;
2243	TMPL_BEGINCODE
2244	BITS TMPL_BITS
2245	bs2DoneInit:
2246	%ifdef BS2_INIT_SAVE_REGS
2247	mov eax, cr2
2248	mov [BS2_REG_SAVE_ADDR + BS2REGS.cr2], eax
2249	mov eax, cr3
2250	mov [BS2_REG_SAVE_ADDR + BS2REGS.cr3], eax
2251	mov eax, cr4
2252	mov [BS2_REG_SAVE_ADDR + BS2REGS.cr4], eax
2253	mov byte [BS2_REG_SAVE_ADDR + BS2REGS.cBits], 16
2254	xor eax, eax
2255	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.cs], ax
2256	mov ax, start
2257	mov [cs:BS2_REG_SAVE_ADDR + BS2REGS.rip], eax
2258	%endif
2259
2260	%ifdef BS2_WITH_TRAPRECS
2261	;
2262	; Install the trap records.
2263	;
2264	BS2_TRAP_RECS_INSTALL
2265	%endif
2266
2267	;
2268	; Detect the CPU.
2269	;
2270	xor eax, eax
2271	mov [g_fCpuIntel], al
2272	mov [g_fCpuAmd], al
2273	cpuid
2274	cmp ecx, 0x444d4163
2275	jne .not_amd
2276	cmp edx, 0x69746e65
2277	jne .not_amd
2278	cmp ebx, 0x68747541
2279	jne .not_amd
2280	mov byte [g_fCpuAmd], 1
2281	jmp .not_intel
2282
2283	.not_amd:
2284	cmp ecx, 0x6c65746e
2285	jne .not_intel
2286	cmp edx, 0x49656e69
2287	jne .not_intel
2288	cmp ebx, 0x756e6547
2289	jne .not_intel
2290	mov byte [g_fCpuIntel], 1
2291	.not_intel:
2292
2293	;
2294	; Call the user 'main' procedure (shouldn't return).
2295	;
2296	call main
2297	.panic_again
2298	call Bs2Panic
2299	jmp .panic_again
2300

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format