bootsector2-cpu-xcpt-2-template.mac@ 72372

Last change on this file since 72372 was 69111, checked in by vboxsync, 7 years ago
(C) year
Property svn:eol-style set to `native` Property svn:keywords set to `Author Date Id Revision`
File size: 13.6 KB

Line
1	; $Id: bootsector2-cpu-xcpt-2-template.mac 69111 2017-10-17 14:26:02Z vboxsync $
2	;; @file
3	; Bootsector test for debug exceptions - multi mode template.
4	;
5
6	;
7	; Copyright (C) 2007-2017 Oracle Corporation
8	;
9	; This file is part of VirtualBox Open Source Edition (OSE), as
10	; available from http://www.virtualbox.org. This file is free software;
11	; you can redistribute it and/or modify it under the terms of the GNU
12	; General Public License (GPL) as published by the Free Software
13	; Foundation, in version 2 as it comes in the "COPYING" file of the
14	; VirtualBox OSE distribution. VirtualBox OSE is distributed in the
15	; hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
16	;
17	; The contents of this file may alternatively be used under the terms
18	; of the Common Development and Distribution License Version 1.0
19	; (CDDL) only, as it comes in the "COPYING.CDDL" file of the
20	; VirtualBox OSE distribution, in which case the provisions of the
21	; CDDL are applicable instead of those of the GPL.
22	;
23	; You may elect to license modified versions of this file under the
24	; terms and conditions of either the GPL or the CDDL or both.
25	;
26
27
28	%include "bootsector2-template-header.mac"
29
30
31	;*******************************************************************************
32	;* Defined Constants And Macros *
33	;*******************************************************************************
34	;;
35	; Some 32/64 macros.
36	;
37	%if TMPL_BITS == 32
38	%define bs2Idt_BP bs2Idt32bit_BP
39	%define MY_R0_CS BS2_SEL_CS32
40	%define MY_R1_CS BS2_SEL_R1_CS32
41	%define MY_R2_CS BS2_SEL_R2_CS32
42	%define MY_R3_CS BS2_SEL_R3_CS32
43
44	%define MY_R0_DS BS2_SEL_DS32
45	%define MY_R1_DS BS2_SEL_R1_DS32
46	%define MY_R2_DS BS2_SEL_R2_DS32
47	%define MY_R3_DS BS2_SEL_R3_DS32
48
49	%define MY_R0_SS BS2_SEL_SS32
50	%define MY_R1_SS BS2_SEL_R1_SS32
51	%define MY_R2_SS BS2_SEL_R2_SS32
52	%define MY_R3_SS BS2_SEL_R3_SS32
53
54	%else
55	%define bs2Idt_BP bs2Idt64bit_BP
56	%define MY_R0_CS BS2_SEL_CS64
57	%define MY_R1_CS BS2_SEL_R1_CS64
58	%define MY_R2_CS BS2_SEL_R2_CS64
59	%define MY_R3_CS BS2_SEL_R3_CS64
60
61	%define MY_R0_DS BS2_SEL_DS64
62	%define MY_R1_DS BS2_SEL_R1_DS64
63	%define MY_R2_DS BS2_SEL_R2_DS64
64	%define MY_R3_DS BS2_SEL_R3_DS64
65
66	%define MY_R0_SS BS2_SEL_SS64
67	%define MY_R1_SS BS2_SEL_R1_SS64
68	%define MY_R2_SS BS2_SEL_R2_SS64
69	%define MY_R3_SS BS2_SEL_R3_SS64
70	%endif
71
72	%ifdef TMPL_64BIT
73	%assign MY_IS_64BIT 1
74	%else
75	%assign MY_IS_64BIT 0
76	%endif
77
78	;; Uncomment this to do lots more iterations (takes time!).
79	%define QUICK_TEST
80
81
82	;*******************************************************************************
83	;* Global Variables *
84	;*******************************************************************************
85	%ifndef CPU_XCPT_1_GLOBALS
86	%define CPU_XCPT_1_GLOBALS
87
88	;;
89	; Asserts a test.
90	;
91	; @param %1 First cmp operand.
92	; @param %2 First cmp operand.
93	; @param %3 Which kind of conditional jump to make
94	; @param %4 The message to print (format string, no arguments please).
95	;
96	%macro ASSERT_SIMPLE 4
97	cmp %1, %2
98	%3 %%.ok
99	cli ; raw-mode hack
100	push dword __LINE__
101	%ifdef TMPL_16BIT
102	push ds
103	%endif
104	push %%.s_szMsg
105	call TMPL_NM_CMN(TestFailedF)
106	add xSP, sCB*2
107	;hlt
108	sti
109	jmp %%.ok
110	%%.s_szMsg: db %4, " (0x%RX32)", 0
111	%%.ok:
112	%endmacro
113
114	%endif
115
116
117	;;
118	; Disable the breakpoints as well as check RA1 bits.
119	;
120	; @changes DRx
121	;
122	BEGINPROC TMPL_NM(DisableBps)
123	push sAX
124	push sBX
125	sPUSHF
126
127	xor eax, eax
128	mov dr7, sAX
129	mov dr6, sAX
130	mov dr0, sAX
131	mov dr1, sAX
132	mov dr2, sAX
133	mov dr3, sAX
134
135	mov sAX, dr6
136	mov ebx, X86_DR6_RA1_MASK
137	ASSERT_SIMPLE sAX, xBX, je, "Wrong DR6 value (RA1)."
138	mov sAX, dr7
139	mov ebx, X86_DR7_RA1_MASK
140	ASSERT_SIMPLE sAX, sBX, je, "Wrong DR7 value (RA1)."
141
142	sPOPF
143	pop sBX
144	pop sAX
145	ret
146	ENDPROC TMPL_NM(DisableBps)
147
148
149	;;
150	; Checks different gate types.
151	;
152	BEGINPROC TMPL_NM(TestStepping)
153	push xBP
154	mov xBP, xSP
155	push sAX
156	push xBX
157	push xCX
158	push xDX
159	push xDI
160	push xSI
161
162	mov xAX, .s_szSubTestName
163	call TMPL_NM_CMN(TestSub)
164
165
166	;
167	; Step one instruction a lot of times to catch DR6 mismanagement.
168	;
169	%ifdef QUICK_TEST
170	mov ecx, 0x1000
171	%else
172	mov ecx, 0x80000
173	%endif
174	.the_1st_loop:
175
176	mov eax, X86_DR6_INIT_VAL
177	mov dr6, sAX
178	mov eax, 0x12345678
179	mov ebx, 0xaabbccdd
180	sPUSHF
181	or word [xSP], X86_EFL_TF
182	sPOPF
183	xchg ebx, eax
184	BS2_TRAP_INSTR X86_XCPT_DB, 0, nop
185	ASSERT_SIMPLE eax, 0xaabbccdd, je, "xchg wasn't executed (eax)."
186	ASSERT_SIMPLE ebx, 0x12345678, je, "xchg wasn't executed (ebx)."
187	mov sAX, dr6
188	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_BS), je, "Wrong DR6 value."
189
190	dec ecx
191	jnz .the_1st_loop
192
193	;
194	; Check that certain bits in DR6 is preserved and others not.
195	;
196	%ifdef QUICK_TEST
197	mov ecx, 0x200
198	%else
199	mov ecx, 0x20000
200	%endif
201	.the_2nd_loop:
202	mov eax, X86_DR6_INIT_VAL \| X86_DR6_B0 \| X86_DR6_B1 \| X86_DR6_B2 \| X86_DR6_B3 \| X86_DR6_BT \| X86_DR6_BD
203	mov dr6, sAX
204	mov eax, 0x12345678
205	mov ebx, 0xaabbccdd
206	sPUSHF
207	or word [xSP], X86_EFL_TF
208	sPOPF
209	xchg ebx, eax
210	BS2_TRAP_INSTR X86_XCPT_DB, 0, nop
211	ASSERT_SIMPLE eax, 0xaabbccdd, je, "xchg wasn't executed (eax)."
212	ASSERT_SIMPLE ebx, 0x12345678, je, "xchg wasn't executed (ebx)."
213	mov sAX, dr6
214	ASSERT_SIMPLE eax, (X86_DR6_BS \| X86_DR6_INIT_VAL \| X86_DR6_BT \| X86_DR6_BD), je, "Wrong DR6 value."
215
216	dec ecx
217	jnz .the_2nd_loop
218
219	;
220	; Done.
221	;
222	cli ; raw-mode hack
223	call TMPL_NM_CMN(TestSubDone)
224	sti
225
226	pop xSI
227	pop xDI
228	pop xDX
229	pop xCX
230	pop xBX
231	pop sAX
232	leave
233	ret
234
235	.s_szSubTestName:
236	db TMPL_MODE_STR, ', EFLAGS.TF stepping', 0
237	ENDPROC TMPL_NM(TestGateType)
238
239
240	;;
241	; Check execution breakpoint.
242	;
243	BEGINPROC TMPL_NM(TestBpExec)
244	push xBP
245	mov xBP, xSP
246	push sAX
247	push xBX
248	push xCX
249	push xDX
250	push xDI
251	push xSI
252
253	mov xAX, .s_szSubTestName
254	call TMPL_NM_CMN(TestSub)
255
256
257	;
258	; Arm all 4 breakpoints and check DR6 management.
259	;
260	%ifdef QUICK_TEST
261	mov ecx, 0x1000
262	%else
263	mov ecx, 0x80000
264	%endif
265	lea sAX, [.bp_dr0 xWrtRIP]
266	mov dr0, sAX
267	lea sAX, [.bp_dr1 xWrtRIP]
268	mov dr1, sAX
269	lea sAX, [.bp_dr2 xWrtRIP]
270	mov dr2, sAX
271	lea sAX, [.bp_dr3 xWrtRIP]
272	mov dr3, sAX
273	mov eax, X86_DR7_RA1_MASK \| X86_DR7_G0 \| X86_DR7_G1 \| X86_DR7_G2 \| X86_DR7_G3 \| X86_DR7_GE
274	mov dr7, sAX
275
276	.the_loop:
277	mov eax, X86_DR6_INIT_VAL \| X86_DR6_BS \| X86_DR6_BT \| X86_DR6_BD
278	mov dr6, sAX
279
280	mov eax, 0x12345678
281	mov ebx, 0xaabbccdd
282	.bp_dr0:
283	BS2_TRAP_INSTR X86_XCPT_DB, 0, xchg ebx, eax
284	ASSERT_SIMPLE eax, 0x12345678, je, "xchg was executed (eax)."
285	ASSERT_SIMPLE ebx, 0xaabbccdd, je, "xchg was executed (ebx)."
286	mov sAX, dr6
287	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_BS \| X86_DR6_BT \| X86_DR6_BD \| X86_DR6_B0), je, "Wrong DR6 value (dr0)."
288
289	mov eax, 0x12345678
290	mov ebx, 0xaabbccdd
291	.bp_dr1:
292	BS2_TRAP_INSTR X86_XCPT_DB, 0, xchg ebx, eax
293	ASSERT_SIMPLE eax, 0x12345678, je, "xchg was executed (eax)."
294	ASSERT_SIMPLE ebx, 0xaabbccdd, je, "xchg was executed (ebx)."
295	mov sAX, dr6
296	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_BS \| X86_DR6_BT \| X86_DR6_BD \| X86_DR6_B1), je, "Wrong DR6 value (dr1)."
297
298	mov eax, 0x12345678
299	mov ebx, 0xaabbccdd
300	.bp_dr2:
301	BS2_TRAP_INSTR X86_XCPT_DB, 0, xchg ebx, eax
302	ASSERT_SIMPLE eax, 0x12345678, je, "xchg was executed (eax)."
303	ASSERT_SIMPLE ebx, 0xaabbccdd, je, "xchg was executed (ebx)."
304	mov sAX, dr6
305	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_BS \| X86_DR6_BT \| X86_DR6_BD \| X86_DR6_B2), je, "Wrong DR6 value (dr2)."
306
307	mov eax, 0x12345678
308	mov ebx, 0xaabbccdd
309	.bp_dr3:
310	BS2_TRAP_INSTR X86_XCPT_DB, 0, xchg ebx, eax
311	ASSERT_SIMPLE eax, 0x12345678, je, "xchg was executed (eax)."
312	ASSERT_SIMPLE ebx, 0xaabbccdd, je, "xchg was executed (ebx)."
313	mov sAX, dr6
314	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_BS \| X86_DR6_BT \| X86_DR6_BD \| X86_DR6_B3), je, "Wrong DR6 value (dr3)."
315
316	dec ecx
317	jnz .the_loop
318
319	;
320	; Touch the code, making sure the BPs don't trigger on data access.
321	;
322	mov al, [.bp_dr0 xWrtRIP]
323	mov [.bp_dr0 xWrtRIP], al
324	mov al, [.bp_dr1 xWrtRIP]
325	mov [.bp_dr1 xWrtRIP], al
326	mov al, [.bp_dr2 xWrtRIP]
327	mov [.bp_dr2 xWrtRIP], al
328	mov al, [.bp_dr3 xWrtRIP]
329	mov [.bp_dr3 xWrtRIP], al
330
331	;
332	; Done.
333	;
334	call TMPL_NM(DisableBps)
335	cli ; raw-mode hack
336	call TMPL_NM_CMN(TestSubDone)
337	sti
338
339	pop xSI
340	pop xDI
341	pop xDX
342	pop xCX
343	pop xBX
344	pop sAX
345	leave
346	ret
347
348	.s_szSubTestName:
349	db TMPL_MODE_STR, ', Exec BP', 0
350	ENDPROC TMPL_NM(TestBpExec)
351
352
353	;;
354	; Check I/O breakpoints.
355	;
356	BEGINPROC TMPL_NM(TestBpIo)
357	push xBP
358	mov xBP, xSP
359	push sAX
360	push xBX
361	push xCX
362	push xDX
363	push xDI
364	push xSI
365
366	mov xAX, .s_szSubTestName
367	call TMPL_NM_CMN(TestSub)
368
369
370	;
371	; Arm all 4 breakpoints and check range handling and such.
372	;
373	mov sAX, cr4
374	or sAX, X86_CR4_DE
375	mov cr4, sAX
376
377	%ifdef QUICK_TEST
378	mov ecx, 1000
379	%else
380	mov ecx, 4096
381	%endif
382	mov sAX, 84h
383	mov dr0, sAX
384	mov sAX, 85h
385	mov dr1, sAX
386	mov sAX, 86h
387	mov dr2, sAX
388	mov sAX, 8ch
389	mov dr3, sAX
390	mov eax, X86_DR7_RA1_MASK \| X86_DR7_LE \| X86_DR7_GE \
391	\| X86_DR7_L0 \| X86_DR7_G0 \| X86_DR7_RW(0, X86_DR7_RW_IO) \| X86_DR7_LEN(0, X86_DR7_LEN_BYTE) \
392	\| X86_DR7_L1 \| X86_DR7_G1 \| X86_DR7_RW(1, X86_DR7_RW_IO) \| X86_DR7_LEN(1, X86_DR7_LEN_WORD) \
393	\| X86_DR7_L2 \| X86_DR7_G2 \| X86_DR7_RW(2, X86_DR7_RW_IO) \| X86_DR7_LEN(2, X86_DR7_LEN_DWORD) \
394	\| X86_DR7_L3 \| X86_DR7_G3 \| X86_DR7_RW(3, X86_DR7_RW_IO) \| X86_DR7_LEN(3, X86_DR7_LEN_DWORD)
395	mov dr7, sAX
396
397	.the_loop:
398	mov eax, X86_DR6_INIT_VAL
399	mov dr6, sAX
400
401	mov eax, 0x12345678
402	in eax, 84h
403	BS2_TRAP_INSTR X86_XCPT_DB, 0, nop
404	ASSERT_SIMPLE eax, 0x12345678, jne, "in was not executed."
405	mov sAX, dr6
406	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_B0), je, "Wrong DR6 value (dr0)."
407
408	mov ebx, 0x12345678
409	in eax, 85h
410	BS2_TRAP_INSTR X86_XCPT_DB, 0, nop
411	ASSERT_SIMPLE eax, 0x12345678, jne, "in was not executed."
412	mov sAX, dr6
413	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_B1), je, "Wrong DR6 value (dr1)."
414
415	mov eax, 0x12345678
416	in eax, 86h
417	BS2_TRAP_INSTR X86_XCPT_DB, 0, nop
418	ASSERT_SIMPLE eax, 0x12345678, jne, "in was not executed."
419	mov sAX, dr6
420	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_B2), je, "Wrong DR6 value (dr2)."
421
422	mov eax, 0x12345678
423	in eax, 8ch
424	BS2_TRAP_INSTR X86_XCPT_DB, 0, nop
425	ASSERT_SIMPLE eax, 0x12345678, jne, "in was not executed."
426	mov sAX, dr6
427	ASSERT_SIMPLE eax, (X86_DR6_INIT_VAL \| X86_DR6_B3), je, "Wrong DR6 value (dr3)."
428
429	dec ecx
430	jnz .the_loop
431
432	;
433	; Done.
434	;
435	call TMPL_NM(DisableBps)
436	cli ; raw-mode hack
437	call TMPL_NM_CMN(TestSubDone)
438	sti
439
440	pop xSI
441	pop xDI
442	pop xDX
443	pop xCX
444	pop xBX
445	pop sAX
446	leave
447	ret
448
449	.s_szSubTestName:
450	db TMPL_MODE_STR, ', I/O BP', 0
451	ENDPROC TMPL_NM(TestBpIo)
452
453
454	;;
455	; Do the tests for this mode.
456	;
457	; @uses nothing
458	;
459	BEGINCODELOW
460	BITS 16
461	BEGINPROC TMPL_NM(DoTestsForMode_rm)
462	push bp
463	mov bp, sp
464	push ax
465
466	;
467	; Check if the mode and NX is supported, do the switch.
468	;
469	call TMPL_NM(Bs2IsModeSupported_rm)
470	jz .done
471	call TMPL_NM(Bs2EnterMode_rm)
472	BITS TMPL_BITS
473	pushf
474	sti ; raw-mode hacks
475
476	;
477	; Do the testing.
478	;
479
480	call TMPL_NM(TestStepping)
481	call TMPL_NM(TestBpExec)
482	call TMPL_NM(TestBpIo)
483
484	;
485	; Back to real mode.
486	;
487	popf
488	call TMPL_NM(Bs2ExitMode)
489	BITS 16
490	call Bs2DisableNX_r86
491
492	.done:
493	pop ax
494	leave
495	ret
496	ENDPROC TMPL_NM(DoTestsForMode_rm)
497	TMPL_BEGINCODE
498	BITS TMPL_BITS
499
500	%include "bootsector2-template-footer.mac"
501

Note: See TracBrowser for help on using the repository browser.

Download in other formats:

Original Format